Develop Bugs

SM-R500 (Watch Active) Stock Firmware

Hello guys, I'm looking for stock firmware of the new Galaxy Watch Active. Can anyone please share it? Hoping for a Multi-CSC version.
Thank you so much for your help!

iorya984 said:
Hello guys, I'm looking for stock firmware of the new Galaxy Watch Active. Can anyone please share it? Hoping for a Multi-CSC version.
Thank you so much for your help!
Click to expand...
Click to collapse
Hi as you requested below is the link for the firmware, i will create a separate thread why i have time .
Dont create duplicate links for the same .
https://drive.google.com/open?id=1p7DI-Tir1C4QxEV1hFXbnrJN9zdSqDbN

You rock man!! ? Thank you for all!!

https://forum.xda-developers.com/showpost.php?p=78849778&postcount=714
Here is 1 older Firmware...
Code:
R500XXU1[B]ASAD[/B]
Maybe for study...
Best Regards

Would it be possible to install the new faces from active watch on the galaxy watch?

Hi, I would like so much to install the new faces. Thank you.

Do you have XAR rom, i want to use samsung pay, i can't connect to my computer by sdb. So i want to flash rom into my watch

Would the firmware solve my problem? My Galaxy Watch Active Samsung Pay is set to UAE But I need it for UK?

I second the wish for an SM-R500 firmware that includes a CSC for Ireland, which I guess would be available on the firmware that includes UK. The one I need is 3IE.

duckofdeath said:
I second the wish for an SM-R500 firmware that includes a CSC for Ireland, which I guess would be available on the firmware that includes UK. The one I need is 3IE.
Click to expand...
Click to collapse
Tomorow morning i give you the Last version
R500XXU1BSD5_Tizen_3File_Multi CSC (OXA)
Sent from my Samsung SM-G975F using XDA Labs

duckofdeath said:
I second the wish for an SM-R500 firmware that includes a CSC for Ireland, which I guess would be available on the firmware that includes UK. The one I need is 3IE.
Click to expand...
Click to collapse
GO there and you follow the steps to update your Watch
https://forum.xda-developers.com/sm...xy-watch-activ-firmware-t3941317/post79761224
Sent from my Samsung SM-G975F using XDA Labs
---------- Post added at 06:46 AM ---------- Previous post was at 06:42 AM ----------
iorya984 said:
Hello guys, I'm looking for stock firmware of the new Galaxy Watch Active. Can anyone please share it? Hoping for a Multi-CSC version.
Thank you so much for your help!
Click to expand...
Click to collapse
GO there and you follow the steps to update your Watch
https://forum.xda-developers.com/sm...xy-watch-activ-firmware-t3941317/post79761224
Sent from my Samsung SM-G975F using XDA Labs

Thanks, nmc-alves! I'll check it out tonight!

Good news and bad news... I've now flashed the firmare you uploaded, Nmc_alves®. Unfortunately that one doesn't seem to contain any Irish CSC options, either. I'll try out a few of the options on it, but what I've seen so far is that Samsung Pay will only activate for Irish cards if the watch is set to an Irish CSC. The generic EU CSC for instance disables Samsung Pay completely.

duckofdeath said:
Good news and bad news... I've now flashed the firmare you uploaded, Nmc_alves®. Unfortunately that one doesn't seem to contain any Irish CSC options, either. I'll try out a few of the options on it, but what I've seen so far is that Samsung Pay will only activate for Irish cards if the watch is set to an Irish CSC. The generic EU CSC for instance disables Samsung Pay completely.
Click to expand...
Click to collapse
Bummer thatcyou can't change to the right csc... hope you can find a solution.
Quick question though, are the new watchfaces from galaxy watch active included on your watch? I'm trying to find a way to flash my galaxy watch with the galaxy watch active firmware...

Which ones are the new watch faces?

duckofdeath said:
Which ones are the new watch faces?
Click to expand...
Click to collapse
For example; Fit future, fresh, trekking mate.
We can download them from playstore, but since they are not native, we can't change them colors or settings like other pre installed faces. If this firmware is an original system image from the watch active, we can?

Fit Future is the only one of those on my watch after a recovery.
Breathe, Pie Twirl, Activity Sparkles, Pop analogue, Peak time, Solari board, My day , Health dashboard, My Photo+, Dashboard, Large, Roaming clock are the other factory installed ones.

New theory... Samsung Pay might not be active on the Galaxy Watch Active in Ireland? I see, there's absolutely no mention of Samsung Pay on the Irish Galaxy Watch Active product page...
So, the Firmware I got by Nmc_alves could actually be the right one. Just a future update away from it getting green lit by whomever pushes that button...

ZTO
Olá pessoal
Preciso da firmware SM-R500 ZTO

I don't get how we can chose the csc we want on this multi-csc firmware ? Can someone explain me ?

measure Blood Presure on Galaxy watch Active 2

hi,
what about blood pressure measurement with the Galaxy S7 Edge and the Galaxy Watch Active 2-possible?

Not sure about s7 edge but watch will work. Install BP Lab and follow instructions.

Thanks for the information. It should also works with my S7 Edge.
This app is not yet available for Germany. Is there any way to install it anyway?

sinalco said:
Thanks for the information. It should also works with my S7 Edge.
This app is not yet available for Germany. Is there any way to install it anyway?
Click to expand...
Click to collapse
apkmirror is your friend ........

@sinalco
Hast Du es hinbekommen?
@All
Somebody is able to make screenshot from Watch?
Is Watch app loading from Store? Or Android App push the Tizen part?
Best Regards

adfree said:
@sinalco
Hast Du es hinbekommen?
@All
Somebody is able to make screenshot from Watch?
Is Watch app loading from Store? Or Android App push the Tizen part?
Best Regards
Click to expand...
Click to collapse
On watch it is install from store. I have attached the photos.

Can't find it here, no result

Nastrahl said:
Can't find it here, no result
Click to expand...
Click to collapse
Downloaded the app from apkmirror and was able to install on my S10.
Works fine, but the next step is to get the app on the watch... therefore you need to callibrate the Bloodpressure device (your watch)
I believe the app is only available in US Store, so not in Europe, because I always get the error that the app is not available in my country.
Anybody has a workarround for that ?
Thanks

I believe the app is only available in US Store, so not in Europe, because I always get the error that the app is not available in my country.
Click to expand...
Click to collapse
Stupid Question...
Error on Watch or Error on Phone?
No idea if it would help to change CSC on Watch to XAR for instance...
Memo to me...
https://mybplab.com/
https://mybplab.com/news-and-updates
MyBPLab app country expansion
The MyBPLab app is currently available for download in the United States, Australia, Canada, and Singapore on Google Play. We are working on expanding to other countries soon! Check back to see an updated list of approved countries.
Click to expand...
Click to collapse
Sidenote...
Funny Tizen app seems 200 KB... I saw Version around 2 MB...
Best Regards

The feature is here...

Just to reiterate i can't get this on my note 9 and Galaxy watch? I know i can get the app on my phone and use the sensor, which i have been doing, but it would be neat to get it on my watch.

Pesti13nce said:
Just to reiterate i can't get this on my note 9 and Galaxy watch? I know i can get the app on my phone and use the sensor, which i have been doing, but it would be neat to get it on my watch.
Click to expand...
Click to collapse
Yep, I'm on the same here.. looking for to push the app from my note 9 to my galaxy watch.. anyone have any clue on how to get it done?
---------- Post added at 06:49 AM ---------- Previous post was at 06:46 AM ----------
kazim.asghar said:
On watch it is install from store. I have attached the photos.
Click to expand...
Click to collapse
Is there any way to download the app and push it to the watch? I can't get it from the store.

In theory yes...
Backup... share...
sdb install ...
Best Regards

andrew.mackew said:
Yep, I'm on the same here.. looking for to push the app from my note 9 to my galaxy watch.. anyone have any clue on how to get it done?
---------- Post added at 06:49 AM ---------- Previous post was at 06:46 AM ----------
Is there any way to download the app and push it to the watch? I can't get it from the store.
Click to expand...
Click to collapse
I am not sure. It can be done as told by adfree. But I can tell you that main app can be download from apkmirror. In my watch the app version is 1.1.1. On some sites people have wrote that VPN can helpful to install the app.

SUNUN said:
The feature is here...
Click to expand...
Click to collapse
Where did you get it?

Please can somebody help to identify the Tizen "part"..
Is it TPK or WGT?
Users with success are from USA and XAR is the valid CSC to download from Store?
Or other CSC also possible?
To identify Tizen App Name... SDB Tool for instance...
Code:
sdb shell
Code:
pkgcmd -l
then list with funny Tizen apps appears...
I can not help at the moment...
My Android handsets are tooooo old to install the APK and play around...
And i have only SM-R760....
Btw.
Maybe I am blind or sleep during reading....
Is SM-R500 also supported?
Thanx in advance.
Best Regards
Edit 1.
https://mybplab.com/watch-faq
Which watches are eligible to use My BP Lab?
Currently, the My BP Lab app works on the Samsung Galaxy Watch Active and Samsung Galaxy Watch Active 2.
Click to expand...
Click to collapse
IMHO SM-R500 and SM-R82..
Edit 2.
Not sure, because filesize... but maybe more BP apps under Construction...
See Video inside attached BPapp.7z
Edit 3.
Some Google/Youtube search...
https://www.youtube.com/watch?v=VWdzczHpoCw
Looks like SM-R500 is also supported...
From Samsung... nice Info:
https://www.samsung.com/au/support/mobile-devices/measure-bp-on-galaxy-watch-active/

How to set up and calibrate https://www.youtube.com/watch?v=-lBmgQtO3BE&t=288s

Thanx for Youtube Link...
Now found older Youtube Video with SM-R500. :good:
https://www.youtube.com/watch?v=FaGjTqxgaBQ
Here I can see he searched via Phone for Tizen App... :good:
In Samsung Galaxy App
Also the Phoe part he install from Samsung Galaxy App...
Because I saw the Phone App is also in Play Store...
https://play.google.com/store/apps/details?id=org.sagebionetworks.research.bp&hl=en
IMHO 3 ways to get the APK for Phone:
Code:
from Samsung Galaxy Store
from Google Play Store
Sideload APK from Source of your Choice
Here I ignore country lock crap... available or not available blabla...
Watch part... only 1 way for now... as it seems. All Tizen cr.p only from "official" Source Samsung Galaxy Store...
Code:
Galaxy App on Phone
So my stupid question left...
Is it possible to search and download from Watch only?
I mean the funny Tizen Galaxy Apps App on Watch...
If yes... then maybe it is possible with CSC XAR... for instance...
Because I saw somebody crying in Youtube comments about Calibration blabla...
This is only fun project... no Doctor advice...
I am not responsible for heart attack...
Best Regards

@adfree Just out of curiosity, if in theory this app works on SM-R500 (only have a HR Sensor), right? In theory, the Galaxy Watch (which, also, has a HR Sensor ) is also capable of using this app?

@andrew.mackew
No idea... I have only SM-R760
BUT maybe we can test self...
@All
OWN RISK!
I am NO Doctor nor Nurse nor your mom...
IMHO "latest" Version 1.1.1
:angel:
Code:
sdb install [COLOR="Red"][B]OWN_risk[/B][/COLOR]_version111.tpk
Best Regards

Is it possible to test out the ECG on the Active Watch 2 for non available countries?

Hi Everyone, I'm not sure if I'm just not searching very well, but as per the title, I was hoping to play around with the ECG for the active watch 2. I have a samsung phone (non-rooted) if it helps.
I saw that its recently come out in the US and Korea, and was hoping this would be as simple as side loading it on, but I have a feeling that may not be the case. Is it possible to test out at the moment, is there any steps/tutorials lurking around?
Thanks so much!

Edit - Found a video here, https://www.youtube.com/watch?v=11lvEJWdzMY installs great, but the ECG doesn't work for me unfortunately. Keeps resetting.
Edit 2 - Found the answer, just wore the watch for 15 minutes, made sure continious heart rate was on (which I think was stuffing up), and now I'm getting past 25 seconds. I think it stops after 5 seconds if you don't have heart rate checking properly.

eitherrideordie said:
Edit - Found a video here, https://www.youtube.com/watch?v=11lvEJWdzMY installs great, but the ECG doesn't work for me unfortunately. Keeps resetting.
Edit 2 - Found the answer, just wore the watch for 15 minutes, made sure continious heart rate was on (which I think was stuffing up), and now I'm getting past 25 seconds. I think it stops after 5 seconds if you don't have heart rate checking properly.
Click to expand...
Click to collapse
Still ECG doesn't work..
I'm on tizen 5.5.0.1 and with galaxy watch active 2

wakasensei said:
Still ECG doesn't work..
I'm on tizen 5.5.0.1 and with galaxy watch active 2
Click to expand...
Click to collapse
I'm on the same, and I do find its a bit off and on. Interestingly I've had some success while lying in bed for a while it starts to work. If you are seeing it get the ECG mode and its super wavy (like you're seeing lines similar to a barcode) thats why its failing. It needs to show like a proper ecg.
Also make sure to hold it like it shows on the photo, I don't know why but I think the thumb placement may be important as well?
Still though I only get it to work like 20% of the time.
I did notice it does better when my heart rate is lower then 90bps, (or maybe 100bps) I wonder if it changes the resolution and it stuffs up the testing.

wakasensei said:
Still ECG doesn't work..
I'm on tizen 5.5.0.1 and with galaxy watch active 2
Click to expand...
Click to collapse
eitherrideordie said:
I'm on the same, and I do find its a bit off and on. Interestingly I've had some success while lying in bed for a while it starts to work. If you are seeing it get the ECG mode and its super wavy (like you're seeing lines similar to a barcode) thats why its failing. It needs to show like a proper ecg.
Click to expand...
Click to collapse
Since you do not provide CSC information, there are 2 cases for you:
- If you have CSC of XAR (USA) then the ECG will be locked (I think not because maybe the ECG app is still visible on your watch)
- If you cannot test the ECG until the 25th second and you have tried many ways that the ECG does not work, then the ECG sensor is likely to be damaged. By following the instructions under the link below you might be able to check it out
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947
If you need to support them what, please information for me

Huy.tq said:
Since you do not provide CSC information, there are 2 cases for you:
- If you have CSC of XAR (USA) then the ECG will be locked (I think not because maybe the ECG app is still visible on your watch)
- If you cannot test the ECG until the 25th second and you have tried many ways that the ECG does not work, then the ECG sensor is likely to be damaged. By following the instructions under the link below you might be able to check it out
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947
If you need to support them what, please information for me
Click to expand...
Click to collapse
My CSC is XEF france

wakasensei said:
My CSC is XEF france
Click to expand...
Click to collapse
You can test ECG with picture guide under
My ECG is working fine and the result is 0. If yours is 5 then it's broken and you need to go to a Samsung service center to have your ECG sensor replaced.
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947

Huy.tq said:
You can test ECG with picture guide under
My ECG is working fine and the result is 0. If yours is 5 then it's broken and you need to go to a Samsung service center to have your ECG sensor replaced.
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947
Click to expand...
Click to collapse
This is great, I've been getting zero so it may be something else for me, but didn't know it existed which is great. Thank you! (Also mine is Australian).

eitherrideordie said:
This is great, I've been getting zero so it may be something else for me, but didn't know it existed which is great. Thank you! (Also mine is Australian).
Click to expand...
Click to collapse
ECG only work for tizen 4.0.0.8 or 5.5. IF your watch is tizen 4.0.0.7, it will not work

Huy.tq said:
You can test ECG with picture guide under
My ECG is working fine and the result is 0. If yours is 5 then it's broken and you need to go to a Samsung service center to have your ECG sensor replaced.
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947
Click to expand...
Click to collapse
I got l-o 5 are you sure it's broken?

wakasensei said:
I got l-o 5 are you sure it's broken?
Click to expand...
Click to collapse
Your watch has reached tizen 5.5. The ECG will have to work if you handle it properly. If it does not respond to any state like ripple and the L-O is 5 then chances are your ECG sensor will fail.

Huy.tq said:
Your watch has reached tizen 5.5. The ECG will have to work if you handle it properly. If it does not respond to any state like ripple and the L-O is 5 then chances are your ECG sensor will fail.
Click to expand...
Click to collapse
Yes tizen's version is 5.5 but in our last update we got just fall detection and vo2max .. what we are trying is just a workarround to activate the others features (ECG and BP) .. for this reason i asked you if you are sure L-O information

wakasensei said:
Yes tizen's version is 5.5 but in our last update we got just fall detection and vo2max .. what we are trying is just a workarround to activate the others features (ECG and BP) .. for this reason i asked you if you are sure L-O information
Click to expand...
Click to collapse
Only Korea, Brazil and US regions are officially having BP and ECG in update (Except US only approved ECG). Other areas that want to use this feature must install the tpk file from outside to use. If you have not installed it, you can download it from the following link:
File BP and ECG posted by adfree: https://drive.google.com/file/d/17dXx39gokFEsmEd9hj4sPds_YKWwosQV/view?usp=drivesdk
File SHM mod by Caravana: https://drive.google.com/file/d/17WU3eZpyOUIOcWstEWSVvGTYO-18Bg6Q/view?usp=drivesdk
You have asked me about L-O info. I tell you that many people have verified this test

Huy.tq said:
Only Korea, Brazil and US regions are officially having BP and ECG in update (Except US only approved ECG). Other areas that want to use this feature must install the tpk file from outside to use. If you have not installed it, you can download it from the following link:
File BP and ECG posted by adfree: https://drive.google.com/file/d/17dXx39gokFEsmEd9hj4sPds_YKWwosQV/view?usp=drivesdk
File SHM mod by Caravana: https://drive.google.com/file/d/17WU3eZpyOUIOcWstEWSVvGTYO-18Bg6Q/view?usp=drivesdk
You have asked me about L-O info. I tell you that many people have verified this test
Click to expand...
Click to collapse
What is L-O info?

JENJEN01 said:
What is L-O info?
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/showpost.php?p=83713661&postcount=7

JENJEN01 said:
What is L-O info?
Click to expand...
Click to collapse
They said l-o must be 0 if it's 5 that's mean your ecg's sensor is failed .. for me it's 5 .. and i'm not sure if this info is checked

wakasensei said:
They said l-o must be 0 if it's 5 that's mean your ecg's sensor is failed .. for me it's 5 .. and i'm not sure if this info is checked
Click to expand...
Click to collapse
Please see the message on the picture below between me and tsengboy. I sent you the link below in the previous post but maybe you have not read it, matteo040178 has an L-O result of 5 and also checked on the ECG application but it does not work. matteo040178 asked me to link the firmware to return to CSC THL (Thailand), tsengboy wants to return to the US (CSC TMB T-Mobile) to be able to bring the watch to a Samsung warranty center to replace the ECG sensor
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947

Huy.tq said:
You can test ECG with picture guide under
My ECG is working fine and the result is 0. If yours is 5 then it's broken and you need to go to a Samsung service center to have your ECG sensor replaced.
https://forum.xda-developers.com/sm...cg-bp-gwa2-t4051141/post83671947#post83671947
Click to expand...
Click to collapse
What's your model number?

wakasensei said:
What's your model number?
Click to expand...
Click to collapse
R835F

Huy.tq said:
R835F
Click to expand...
Click to collapse
We don't have the same model .. and i'm not sure that we have to get the same value as L-O paramerer ..
First we have to know the meaning of this parameter

Change CSC of Galaxy Watch 5

Hello everyone,
Any idea on how to change the CSC of Galaxy Watch 5 models (incl. SM-R925). It appears that Samsung has blocked *#272*719434266344# or *#272*IMEI# methods to change the CSC. And it doesn't appear any stock firmware to be available yet to flash it with NetOdin.
For reference, LTE network on the new Galaxy Watches is regionally locked. Meaning, if you buy the US version of Galaxy Watch 5 LTE model, it is unlikely you could activate it on networks outside of the US, including Canadian carriers. Unless, you somehow change its CSC and region. ( Carrier service cannot be activated outside of the United States on a watch sold for use in the United States. https://www.samsung.com/us/support/answer/ANS00082122/#:~:text=Activate service,-When you connect&text=Note: Carrier service cannot be,a phone to activate service. )
Any hints or clues on how to change the CSC would be appreciated?
#csc #galaxy_watch #galaxy_watch_5 #samsung #samsung_galaxy #watch5pro #samsung_firmware #samsung_galaxy_watch #wearos #wearos3

You know you are in Tizen Forum?
Since GW4 crap it is Android...
GW4 India INS as active CSC work this:
CSC change on Watch 4 Bluetooth 100% Samsung Pay Working
****Disclaimer : I am not responsible for any data loss or damage of the device. Hi All, I know everyone is frustrated that we are not able to change the CSC on Watch 4 Bluetooth version. I was keep on trying different methods and atlast i am...
forum.xda-developers.com
No idea if also INS blocked now...
Best Regards

adfree said:
You know you are in Tizen Forum?
Since GW4 crap it is Android...
GW4 India INS as active CSC work this:
CSC change on Watch 4 Bluetooth 100% Samsung Pay Working
****Disclaimer : I am not responsible for any data loss or damage of the device. Hi All, I know everyone is frustrated that we are not able to change the CSC on Watch 4 Bluetooth version. I was keep on trying different methods and atlast i am...
forum.xda-developers.com
No idea if also INS blocked now...
Best Regards
Click to expand...
Click to collapse
You are right. There was not a specific section for GW5.
p.s. Thanks for your reply with the suggested workaround, but as mentioned, the method of *#272*...# does not work anymore on GW5.

Hi @dad6534
I also have a Watch5 Pro. I noticed that on the Galaxy phones the CSC code change was disabled at the Phone Dialer app. If you download the google phone app you can still change the CSC. So, it should be possible to get an old Dialer APK for Watch 4 before the update that disabled the CSC change. I've been trying to find an old version of it, but I coulnd't find any Wear OS apk repo.

rafaelborja said:
Hi @dad6534
I also have a Watch5 Pro. I noticed that on the Galaxy phones the CSC code change was disabled at the Phone Dialer app. If you download the google phone app you can still change the CSC. So, it should be possible to get an old Dialer APK for Watch 4 before the update that disabled the CSC change. I've been trying to find an old version of it, but I coulnd't find any Wear OS apk repo.
Click to expand...
Click to collapse
I've never tried t hese but it seems APK mirror has some versions. https://www.apkmirror.com/apk/googl.../wear-os-phone-android-wear-2-02-014-release/

YellowGTO said:
I've never tried t hese but it seems APK mirror has some versions. https://www.apkmirror.com/apk/googl.../wear-os-phone-android-wear-2-02-014-release/
Click to expand...
Click to collapse
Hello,
Anyone successfully sideloaded and installed this?
Thanks,

I did try to install the previous version of the Samsung phone but not this one, but it says the version is too old to install, so does anyone find a way to modify the csc of watch5?

So, I plan to buy a Watch 5 Pro in USA but I need to change its CSC to ZTO. Did anyone was able to change the CSC so far in the Watch 5?

Any success in this ?

Good Morning
I have a Watch 5 pro LTE
R925NKOU1AWB1
SM-R925NZKAKOO
I Am looking for a CSC in XEF
THANKS

Anyone manage to change the csc? I have a gw 5 sm-r905n which is from Korea and end up my lte is region lock need firmware to flash but seems that there is no firmware out for the 905 model with is the gw 5 40mm lte model

dad6534 said:
Hello,
Anyone successfully sideloaded and installed this?
Thanks,
Click to expand...
Click to collapse
I tried but to no avail. The app instantly crashes.
My hate for samsung can not be understated. Why make the effort to lock down every possible way of circumventing these stupid region locks? I'm just trying to use google wallet man. I can't even use samsung pay for some odd reason even though I bought my watch in Korea.

I have the GW5 Pro (Bluetooh) but is from Panama... There are many apps that not work.. I have tried a lot of procedure to change the CSC but is not working. Every time that I tried something I need to configure again, and again and again

How toi install apk on Samsung Galaxy watch active

Hello, i wood like to know how toi install apk on Samsung Galaxy watch active.
I watched tutorials on YouTube for Galaxy watch 2, 3, 4 but i did no find a tutorial for Galaxy watch active.
I think that is possible because unknow sources are avalaible.
Sorry for the writing, I am french

You cannot install apk files on the Galaxy watch active. It runs Tizen OS and not Android WearOS.

Thanks you for you reply, but it's weird because the unknown source option is available

Anto2938 said:
Thanks you for you reply, but it's weird because the unknown source option is available
Click to expand...
Click to collapse
RE: Yes, it is avalible but for Galaxy Watchface Studio only