[ROM] [11.0] LineageOS 18.0 UNOFFICIAL Builds (pme) - HTC 10 ROMs, Kernels, Recoveries, & Other Developm

[ROM] [11.0] LineageOS 18.0 UNOFFICIAL Builds (pme) - HTC 10 ROMs, Kernels, Recoveries, & Other Developm

TIPS
1. - Since advanced reboot not implemented yet, if you want reboot to recovery, install one terminal app and type: reboot recovery
( root not needed for this )

my

This ROM is pretty smooth I haven't discovered any ɓug yet, still testing, Thanks @fagyi you are the best

@fagyi
No bugs so far, working smoothly
Tq

Got fingerprint working by setting it up again, google keyboard setting fixed by going to phone and set from there but preference still closed, battery better by flashing two magisk module universal gms mode and Lspeed apk. This rom is too good for an early build.thanks fagyi
---------- Post added at 09:29 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR]

Setup fingerprint at every reboot and you will be ok, until the next build.

It's working
fagyi said:
TIPS
1. - Since advanced reboot not implemented yet, if you want reboot to recovery, install one terminal app and type: reboot recovery
( root not needed for this )
Click to expand...
Click to collapse
Advance reboot is working fine

CAMERON1988 said:
Setup fingerprint at every reboot and you will be ok, until the next build.
Click to expand...
Click to collapse
If I remember right, that Im updated the service blobs also, so https://review.lineageos.org/c/LineageOS/android_frameworks_base/+/287693 not needed anymore, I need remove the config_cleanupUnusedFingerprints from device side. Thanks.

installed with nikgapps basic ok; require permissions settings to enable stock LOS sync;
no stock mail app found - not included yet ?
extended power menu enabled works ok
could not set screen-1 with discovery for stock launcher (trebuchet) - any hints ?
great build, thank you @fagyi

Maybe it's better to perfect past ROM's before tackling new ones? They have a lot of problems and things that require improvement, and you again strive to quickly port an actual android with new problems and bugs. Brilliant.

fforimen said:
Maybe it's better to perfect past ROM's before tackling new ones? They have a lot of problems and things that require improvement, and you again strive to quickly port an actual android with new problems and bugs. Brilliant.
Click to expand...
Click to collapse
What are the problems you have discovered so far on this lineage 18 port? I believe if you have found any it will be fixed in the next build, This rom is too stable to be a beta rom because I'm using it as my daily driver. Without the likes of fagyi we would have still be on stock oreo.

fforimen said:
Maybe it's better to perfect past ROM's before tackling new ones? They have a lot of problems and things that require improvement, and you again strive to quickly port an actual android with new problems and bugs. Brilliant.
Click to expand...
Click to collapse
If you feel inspired in development, I welcome your help in it. I will spend several hours making the latest version available. I have limitations for me too, because it requires a lot of knowledge, but I try to provide the best for us.
What is the many bugs in previous versions? Pls list of that on LOS 17.1 thread or Pixelexperience ( logcat & dmesg would be nice with bugs ).
The lot of problems which you mentoined I feel an exaggeration.

fforimen said:
Maybe it's better to perfect past ROM's before tackling new ones? They have a lot of problems and things that require improvement, and you again strive to quickly port an actual android with new problems and bugs. Brilliant.
Click to expand...
Click to collapse
Dude I have used previous rom for almost 6 months
As my daily driver,
What problems are u talking about?
This new rom is nearly perfect for its first release
Exept the fingerprint bug

fagyi said:
If you feel inspired in development, I welcome your help in it. I will spend several hours making the latest version available. I have limitations for me too, because it requires a lot of knowledge, but I try to provide the best for us.
What is the many bugs in previous versions? Pls list of that on LOS 17.1 thread or Pixelexperience ( logcat & dmesg would be nice with bugs ).
The lot of problems which you mentoined I feel an exaggeration.
Click to expand...
Click to collapse
To be sincere @fagyi I'm very happy that you owned this our HTC 10 device, at least we will expect more major update like android 12/13, on this old device. Coming from device that has no community support like galaxy s6 g920p every owner had no choice than to use stock base nougat roms but here is a different story, we have the likes of Fagyi who is working tirelessly to make sure that this device get updated more faster than those popular devices, I think we should be grateful to him.

Rom passed safety net by enabling magisk hide in magisk modue

Can someone recommend a Gcam that will work with this lineage 18.0 because I have tried so many Gcam mod out there but not good

CAMERON1988 said:
Can someone recommend a Gcam that will work with this lineage 18.0 because I have tried so many Gcam mod out there but not good
Click to expand...
Click to collapse
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1330/
use this it works perfect

NSH021 said:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1330/
use this it works perfect
Click to expand...
Click to collapse
Thanks man it's working excellently.

@fagyi
I am experiencing 'very weak wifi' even when I stand very near to the router I don't get full signal, in this build
But mobile network coverage has increased
Compared to 10 rom

Related

[ROM][Official][Weekly] LineageOS 14.1 for OnePlus 3/3T

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Front camera is buggy, due to the buggy camera HAL
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (See #2 for details)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
A video guide by @ashokmor007
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/oneplus3
[/LIST]
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3T
Contributors
dianlujitao, Grarak
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2017-02-08
Last Updated 2017-02-16

Please relocate to https://forum.xda-developers.com/oneplus-3/development/rom-cyanogenmod-14-1-oneplus-3-t3496850 @ OnePlus 3 & 3T Cross Device Development

Release note:
New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS 4.0.2 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.
FAQs:
My status bar quick pulldown and notification slider are broken, why?
See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard
Why the builds are unified?
Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm really excited that Lineage OS has been released officialy for our 3T
Just one small question
Do OTAs work?
Thanks

I tried the front camera, and actually it's working nice. (Snap Camera)
By the way, great ROM and glad to see it on 3T!

subscribed
question
dm-verity and forced encryption disabler still needed ?

So is this official official official? Lol. I ask because there are so many official and unofficial of everything on this one plus Fred that I am overwhelmed and confused at times

poor2rican1 said:
So is this official official official? Lol. I ask because there are so many official and unofficial of everything on this one plus Fred that I am overwhelmed and confused at times
Click to expand...
Click to collapse
Yes, it is. As you can see, in the first post there is the LineageOS official download page.
EDIT: @dianlujitao There is an error in the first post, in the disclaimer. Warranty is still valid.

Sweet ty

xpissio said:
I tried the front camera, and actually it's working nice. (Snap Camera)
By the way, great ROM and glad to see it on 3T!
Click to expand...
Click to collapse
Front camera is working?
And also what about OTA?

The download link refers to the OnePlus 3 download page, not the OnePlus 3T. Where can I find the downloads for the 3T?

Will the OIS and EIS work?

bmxje said:
The download link refers to the OnePlus 3 download page, not the OnePlus 3T. Where can I find the downloads for the 3T?
Click to expand...
Click to collapse
The link is correct. The zip file works for both - the OP3 and the OP3T. It's unified

Reeb_Lam said:
Front camera is working?
And also what about OTA?
Click to expand...
Click to collapse
I wrote "It's working nice".... So, yes, it works.
I can't try OTA because... there's not a new build.

xpissio said:
I wrote "It's working nice".... So, yes, it works.
I can't try OTA because... there's not a new build.
Click to expand...
Click to collapse
Lol

Good evening possible another link because impossible to download the source thank you
edit: resolved

Thanks a lot for this! Working good!
Waiting for notification slider and front camera fix. And will give donation later ^_^

Finger reader not working very well when charging
Thanks for very good working!

Live Display (automatic) not working here.
EDIT: Rebooted and now it works.
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

I am trying to switch to the official LOS nightly from 07 Feb, coming from this unofficial rom which worked perfectly: https://forum.xda-developers.com/oneplus-3t/development/rom-unified-lineageos-cm14-1-t3525551
I did a clean install, flashed twrp 3.0.4-1, then the dm-verity and forced encryption disabler zip (version 5.1), then the LOS build, open-gapps nano package (from 8th of Feb) and the LOS root addon.
Tried numerous times now, and different things: formatting data as ext4, flashing the OOS before doing the clean install, pico instead of nano gapps. Yet the same thing keeps happening to me:
Everything works fine first, yet after encrypting the phone and turning privacy guard on and to quite strict settings for google services, the phone freezes after entering the SIM pin-code during boot. Won't start anymore at all after that.
Tried again today without encrypting the phone and just turning on privacy guard for all services starting with "Google ...", whereas I selected ask everytime rather than denied. Same thing happened, so I believe now it is a Gapps related issue.
I am now back on the abovementioned unofficial build, which works just fine with exactly the same set-up which leaves me puzzled as this build is supposed to be 99,99% pure LOS.
As some people are reporting the nightly is working fine for them: am I doing something wrong? Is anybody else having similar issue? Anybody have an idea how to fix it?
Thanks in advance for any help, well appreciated!

[ROM][AOSP][18/08] halogenOS 8.1 for OnePlus 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android, Reimagined.
For the best experience, view the thread on a web browser like Chromium or Firefox.
Desktop: Brilliant. Mobile: Good. Tapatalk: OK. XDA-Labs: Horrible.
Code:
/*
* The modifications performed to your device are
* performed by yourself, thus you must perform the
* leap of fate and accept the inevitable outcome, the
* responsibilities of what to do with your device are passed to you.
*
* We are of no responsibility for any damages, data loss
* or results of unexpected outcome, if you have **SERIOUS**
* problems with this software, do not hesitate to contact
* the developers or maintainers of your device port.
*
* We are not liable for anything that happens with your
* device. Shall you somehow screw up and take the leap of faith
* you may find that some companies may do indeed still honour
* warranties, although we cannot give one ourselves.
*
* Don't be stupid and bet on that generosity of companies though,
* please be responsible for what you do with your device.
* Do not try overclocking up to glorious 1337 GHz thinking an OEM
* would replace your glorious space heater only matched by the GTX480 etc.
*
* We recommend you to take the advice above regardless.
*/
XOS is a new generation Android-based cutting-edge OS based on the Android Open Source Project
What is XOS?
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Internals of XOS
At core, the ROM is composed mainly of components from the
Android Open Source Project (AOSP) and small parts from Code Aurora Forum (CAF) necessary,
with extremely minor set of components from LineageOS (LaOS or LN) which
have been added to source in order to allow for better cross-device compatibility.
Our LOVE to others
A huge thanks goes to those behind the AOSP and CAF, the LineageOS Project, AOSiP and many others including all of its
contributors for the sources used in the development of the base ROM which we
started with inclusive of all the work and dedication their team puts in order to
keep us updated on the awesome contributions that they make.
We will be keen on ensuring that we be up to date with the code from our base sources,
with regular ROM updates hopefully coming from time to time.
Please do not ask for ETA's (else you shall be spooked by Mr Skeltal). Almost all of us are
students, and with the current lifestyles and routines we have, it is not that easy to acquire
time to develop the ROM, though we'll be sure to keep you updated and release OTAs as
soon as they are available and ready for publication. If you want to be really updated quick,
then join us on Telegram: http://telegram.me/halogenos
Visit our website for features such as: Downloads, Information etc.
https://halogenos.org
Although no data should be lost or damaged by the flashing process,
we advise you to follow the following steps if you are coming from another ROM:
Code:
* Please take a full [I]Nandroid[/I] backup!
* Please copy your back up to an external device.
* Back up your [I]Internal Storage[/I]
* When completed, [I]clean flash[/I] the build (format using fastboot --wipe-and-use-fbe if your device supports FBE)
Although you usually can dirty flash halogenOS over other ROMs, considering the other
ROM is built upon the same Android version, it is not guaranteed to work.
In case of performance issues or crashes please do a clean flash.
Overall as a ROM, XOS is very stable. Our mission statement has always been of maintaining a clean and properly maintained ROM.
We take proper priority with ensuring that performance and stability are put first, features are considered an extra topping on the cake.
All Builds/Devices/Maintainers
Substratum Theming Support
Community supported by the Substratum team
Custom Lockscreen Visualizer
Offline Gesture Recognition
Upstream Security Patches
Support for `addon.d`
Application Signature Spoofing Toggle (for microG)
Various Kernel Optimizations
Long Press Home for Assist
System UX & Performance Optimizations
Audio Tweaks
Enhanced Media Support (Video, Audio, ...)
I/O Tweaks
No black bars on big screens
OP-like gesture navigation
OnePlus 5
Alert Slider & Gestures Support
Flash Kernel by @nathanchance - compiled using Clang 7 and upstreamed
FBE
Issues
None that we know of
Installing for the first time
Code:
* Download the current version of XOS for your device.
* Reboot into a compatible Android Recovery solution. (We recommend TWRP)
* Wipe [B]'/system' & '/cache'[/B], [B][U]FORMAT[/U] /data preferably using fastboot --wipe-and-use-fbe (You will lose all your data incl. internal storage)[/B].
[I](Optional: For `Dirty Flash`, do not wipe [b]anything[/b])[/I]
* Select the appropriate ROM zip and flash the current ROM build.
* Want Google Apps? Obtain and flash the latest GApps from http://opengapps.org/
* Flash any other system modifications you may want
* Reboot.
Manually updating the ROM
XOS ships with an OTA updater built-in (soon) which should automate the downloading and flashing process,
however should your wish be to manually update the ROM, you should be our guest.
Code:
* Download the current version of XOS for your device.
* Reboot into a compatible Android Recovery solution. (Note: We recommend TWRP)
* [b]Please do not[/b] wipe anything, including Cache/Dalvik/ART, the ROM has you covered.
* Select the appropriate ROM zip and flash the current ROM build.
* Reflash any system modifications that do not survive updated (everything that is not addon.d-capable)
* Reboot.
You do not need to wipe Cache/Dalvik.
You do not need to flash Google Apps again*.
You do not need more than 5 minutes.
* Just make sure that you don't wipe system before flashing.
Tested compatibility
Although following things are compatible with halogenOS, we do not provide direct support for it.
Compatible additions are:
ViPER4Android
JamesDSP
Magisk
microG
GApps
Screenshots
@regalstreak
@xdvs23 (actually xdevs23, but that was already taken on XDA)
@sewer56lol
@jbw716
@marpe
@dango99
@hunter_bruhh
@MSF-Jarvis
@keessonnema
Download Links
Download latest release
You can find all builds on this page
ROM Sources
All Sources | ROM, Kernel, Trees etc. @ halogenOS Gitea.
OnePlus 5
Kernel source
Device tree
Common device tree
Vendor blobs
Join our
Telegram group
Telegram News Channel
Telegram Off-Topic Group
Code Aurora Forums, LineageOS, ...
And everyone else who contributed and helps us!
In case you feel left out here, please contact us!
XOS Webpage

XDA:DevDB Information
halogenOS for OnePlus 5, ROM for the OnePlus 5
Contributors
xdvs23, Evokkimus
Source Code: https://git.halogenos.org/halogenOS/
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS 5.1.4
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: XOS 8.1.0 20180818
Stable Release Date: 2018-08-18
Created 2017-08-02
Last Updated 2018-09-03

Reserved
FBE works as intended

Reserved

Reserved

Awexxome!

Here comes the legend!

Awesome
Enviado desde mi ONEPLUS A5000 mediante Tapatalk

Will test it and report
Thank you very much for the great work

Great to see halogen for op5. ?

Wait, you have a working OP camera on this?

DespairFactor said:
Wait, you have a working OP camera on this?
Click to expand...
Click to collapse
https://github.com/halogenOS/androi...mmit/0003049f05d2ec19d95430e4b2b36af4b07e93b8
https://github.com/halogenOS/androi...mmit/cb9e4cac122a669a2715f63b642a453cf1cc6e09
https://github.com/halogenOS/androi...mmit/66ad226f847226df8f47009355a2f9e9ccba31ef
https://github.com/halogenOS/androi...mmit/8a103d05c93e35cd406ebd80e99e5f725e1f1800
https://github.com/halogenOS/androi...mmit/53e1d43bf947f4d7dcbbfc22f6476aa3020fd4f1
Is it supposed to be difficult? Was trivial effort on our end

Is camera with working EIS on 4k recording, like on OOS 4.5.7? Tnx

Alternate mirror : https://sourceforge.net/projects/halogenos/files/cheeseburger/

Camera is really slow. Not sure if it was tested, but it took 2-3 seconds to take a photo.. is it normal ? or just on my end ?
Also I must add that, although it looked like the Oneplus5 camera, the portrait option was missing

crawlingcity said:
Camera is really slow. Not sure if it was tested, but it took 2-3 seconds to take a photo.. is it normal ? or just on my end ?
Also I must add that, although it looked like the Oneplus5 camera, the portrait option was missing
Click to expand...
Click to collapse
Yeah!! camera is really slow...But ig OnePlus has to release their camera hal for that and for working portrait mode cuz telephoto lens isn't working rn on all custom roms...

Works on encrypted phones?

DespairFactor said:
Wait, you have a working OP camera on this?
Click to expand...
Click to collapse
Yes

crawlingcity said:
Camera is really slow. Not sure if it was tested, but it took 2-3 seconds to take a photo.. is it normal ? or just on my end ?
Also I must add that, although it looked like the Oneplus5 camera, the portrait option was missing
Click to expand...
Click to collapse
Will need to improve some things until the regular release day. Might be able to enable ZSL untill then.

Can I install XOS on an encrypted phone?

poincare said:
Can I install XOS on an encrypted phone?
Click to expand...
Click to collapse
Please do not spam the thread.
FBE is not enabled. Check OP for more information on how to install this rom.

[OFFICIAL] LineageOS 16.0

IMPORTANT INFORMATION
How to flash treble roms having /factory instead of /vendor?
* First time custom rom flasher/ coming from ZUI / Never flashed treble rom / Never flashed factory2vendor patch
1. Flash Treble TWRP ( which supports /factory )
( https://twrp.me/zuk/zukz2.html )
2. Flash ROM + GApps etc
* Coming from roms for which you had done factory2vendor conversion
1. Flash Vendor2factory zip
( https://androidfilehost.com/?fid=962187416754475514 )
2. Flash new TWRP with /factory support
It will work for both non treble like zui , and treble roms having /factory instead of vendor support
( https://twrp.me/zuk/zukz2.html )
3. IMPORTANT STEP : Reboot to new TWRP
4 Flash rom
5. No need to wipe if coming from same rom
Or
1. Flash ZUI via QFIL
2. Flash TWRP ( which supports /factory )
3. Flash rom
updated information on 03/02/2019
Credits to @kubersharma for the quick guide

fapfapfap

Awesome ?

Wew :good:

Finally:laugh:

Amazing, was waiting for a very long time for this?

Even though Im not a fan of Lineage as it lacks some crucial features that I need, it's good to see a Lineage OS thread popup in the forum again
Hope that this one can get good performance & stability for official qualification

Thanks for the ROM! Please can someone test whether it boots with encrypted data. It is not mentioned in the known bugs so I am hoping that it works.

P650SE said:
Thanks for the ROM! Please can someone test whether it boots with encrypted data. It is not mentioned in the known bugs so I am hoping that it works.
Click to expand...
Click to collapse
Encryption should work fine.

kubersharma said:
Encryption should work fine.
Click to expand...
Click to collapse
That's fantastic to hear. I'm glad that there are a few Android Pie ROMs available now with support for encryption because I think it's an essential security feature for those of us with unlocked bootloaders.

I am using bootleggers 3.0 rom currently which is a non-treble rom and earlier before that I was using AEX which was a treble rom, so I needed to do factory2vendor and used that specific twrp recovery. What changes should I make before flashing this rom?

abhi8192 said:
I am using bootleggers 3.0 rom currently which is a non-treble rom and earlier before that I was using AEX which was a treble rom, so I needed to do factory2vendor and used that specific twrp recovery. What changes should I make before flashing this rom?
Click to expand...
Click to collapse
Read second post.

Awesomesauce!
Update 1:
I confirm that Encryption is working!!!
Gcam mod(GoogleCamera-Pixel2Mod-Arnova8G2-V6) working fine, so long as a basic gapps is installed obviously.
Update2:
- Love the new Trebuchet launcher, it allows you to lock/hide apps, for example, you can lock 'Settings' and the 'Google play store app' and let them be opened via fingerprint, works really well
- Clean stock LineageOS UI
- 1% per hour battery drain on standby (noticed over night)
- Power button panel 'Lockdown' option is neat, locks your phone and needs the pin/pattern to open/unlock
- Simple. Clean. Secure!
Coming from another ROM(Don't want to name it because this will become a pissing contest) I miss:
- Launcher allowing double tap to sleep. If you use something like Lawnchair Launcher double tap to sleep requires the app to have admin privileges and when you double tap it does a lockdown, i.e. you need to use the pin to unlock, I googled, this is expected behavior
- Live Display Night mode is not as good as Night Mode lighting elsewhere
Still toying around and trying to tweak to get the best battery life!
Will update this post if I find any issues. Working fine so far

Are there any option to customize u touch or to disable H/W keys?
Thanks

tomatosmoothie said:
Update:
I confirm that Encryption is working!!!
Click to expand...
Click to collapse
Thanks a lot for the confirmation. Good to know.

[email protected] said:
Are there any option to customize u touch or to disable H/W keys?
Thanks
Click to expand...
Click to collapse
Yup!
https://imgur.com/a/KNbvi3l

tomatosmoothie said:
Yup!
https://imgur.com/a/KNbvi3l
Click to expand...
Click to collapse
i see you have been using it , can you post a short review ? also some screenshots would be welcomed , thanks.

Please some screenshots!

samartht said:
i see you have been using it , can you post a short review ? also some screenshots would be welcomed , thanks.
Click to expand...
Click to collapse
I wish I could, I do not game and use it as a daily driver, sorry. If you are specific about what you want a screenshot of I can try (I value my privacy and don't like sharing a screenshot of the stuff I use) to share. It's generally the same LineageOS, just Pie
GopalKaul said:
Please some screenshots!
Click to expand...
Click to collapse
If you are specific about what you want a screenshot of I can try (I value my privacy and don't like sharing a screenshot of the stuff I use) to share. It's generally the same LineageOS, just Pie
I suggest trying it, it's stable for sure.

[Android 10.0.0]LineageOS 17.1 [STABLE] - LineageOS 18.0 [PRE-ALPHA] for V40

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10.0, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working:
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Video Recording
Video Playback
Audio
Sensors
Flash
GPS
DAC
Vibration
Wifi Hotspot
Selinux enforcing
What's not working:
BT Audio in some situations
Where are the features? (LOS18.0 edition)
LineageOS 18.0 is in early development process so don't complain about xyz features missin or crashing!
Instructions:
you flash in TWRP
you DONT inject TWRP (yet, when TWRP is made for metadata, then you can)
you reboot to other lots recovery (atm thats lineage one)
there you HAVE TO format data/factory reset
then you can install gapps and so (by apply update and adb sideload)
then boot system
V40 Telegram group chat
Downloads:
GDrive
Sources:
Device Tree judypn: judypn
Device Tree sdm845-common: sdm845-common
Device Tree lge common: lge common
hardware/lge: hardware/lge
Kernel: sdm845
Vendor: lge
lineage-17.1 branch
XDA:DevDB Information
LOS for Judypn, ROM for the LG V40
Contributors
SGCMarkus
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10/11
ROM Kernel: Linux 4.x
ROM Firmware Required: 10
Version Information
Status: Stable + Pre-Aplha
Created 2019-09-20
Last Updated 2020-09-20

Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Changelogs
Release 20.09.2019
- Initial release
Release 02.11.2019
- Updated LOS sources (October security patch, other things)
- Switched to Z01R prebuilt Display and Media HALs
- Building nearly everything except the necessary prebuilt from source (Display + Media HALs)
- Fixed Wifi hotpot (thx to @Xsavi for pointing me into the right direction )
- Vibration wont **** up anymore (but is weaker instead for some reason)
- Tons of other stuff i might have forgotten
Release 05.01.2020
- Updated LOS 17.0 to LOS 17.1 (december security patch, pixel feature drop rebase)
- Updated Z01R prebuilt Display and Media HALs to final
- Using V405EBW 20d (November) proprietary files
- Added SDFAT driver for exfat support by the kernel
- Few wifi changes
- other things i may have forgotten
Release 09.12.2020
- Updated LineageOS sources, September patch
- based on V405EBW 30b -> requires 10 firmware
- enabled A2DP offload + Qti BT Stack
- Qti power hal + different dt2w
- fixed offscreen gestures
- enabled metadata encryption (ext4 + f2fs supported) by using persdata
- SELinux enforcing (gib logs if something doesnt work properly, so far what i tested it worked)
- removed some unneeded LG crap
- rebased kernel on V405EBW 30b + CAF Upstream to 08100, Linux Upstream to 4.9.235
- fixed DAC issues with avc reset/it turning off automatically

Frequently Asked Questions:
Q. Can this ROM be flashed through TWRP?
A. Yes, proceed with the latest TWRP image
Q. Sounds good. How can I contribute to project?
A. Test the build as much as you can and report bugs which can be reproduced with exact steps and are not random.
Q. How to disable "Apps running in background" dialog?
A. When you see the dialog, long press on it and select "Settings". From there, you'll have a toggle to disable it.
Q. Which Models of the V40 are supported?
A. Tested on V405EBW and V405UA so far, but should work on all, EXCEPT US T-mobile variant.

Wow. Android 10 with los17 came so fast to LG V40. And seems like it's nearly daily driver condition.
Was thinking of buying lg v40 but now I'll definitely go buy it as development seems great on it ?.
You're so awesome!

Any screenshots?

Awesome work Markus! Your dedication to the development of this device is extremely encouraging to get other to want to start developing on this phone. Thank you for your work!

Inerent said:
Any screenshots?
Click to expand...
Click to collapse
Updated with screenshots ^^

@SGCMarkus .. I think you meant V40 telegram group

neocyke said:
@SGCMarkus .. I think you meant V40 telegram group
Click to expand...
Click to collapse
Uuups, too much copy paste xD
Thanks, corrected it, but atleast the link behind it went to the V40 group

Awesome guys thank you all, I will be donating. Question how do I install TWRP on my Sprint (Unlocked Pie) to install this?

Droidman61 said:
Awesome guys thank you all, I will be donating. Question how do I install TWRP on my Sprint (Unlocked Pie) to install this?
Click to expand...
Click to collapse
SGCMarkus already put up the guide for that

Droidman61 said:
Awesome guys thank you all, I will be donating. Question how do I install TWRP on my Sprint (Unlocked Pie) to install this?
Click to expand...
Click to collapse
You can follow this guide here: https://forum.xda-developers.com/lg-v40/development/twrp-lg-v40-judypn-t3970111
good luck!

SGCMarkus said:
...
Click to expand...
Click to collapse
Is there any chance you could try and port Lineage 17 to the V20?

Why doesn't this work on the T-Mobile model, and is there any hope for owners of that model in terms of custom ROMs?

What partitions would I check on backup in TWRP if I was going to install Lineage 16 or 17?

samfriedmann_ said:
Why doesn't this work on the T-Mobile model, and is there any hope for owners of that model in terms of custom ROMs?
Click to expand...
Click to collapse
Because T-Mobile wants to be different, if you try to unlock the bootloader the normal way you get a brick. If my memory is working correctly, Vlad has mentioned something about being able to unlock the bootloader but with soldering and opening the device itself.
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
Android4Lif said:
What partitions would I check on backup in TWRP if I was going to install Lineage 16 or 17?
Click to expand...
Click to collapse
Well first you would backup everything minus system.img and Vendor.img...on both slots just to make sure

samfriedmann_ said:
Why doesn't this work on the T-Mobile model, and is there any hope for owners of that model in terms of custom ROMs?
Click to expand...
Click to collapse
The tmobile variants always have a different RSA key for their firmware -> the one from the other models wont work.
Kernel and so on would work fine (would just need different firmware files), but the issue is that you cant even unlock/root in the first place (to my knowledge)

Unbelievably great work guys!!!!! My upgrade is available next month but this really makes me think twice!
How does it run? Battery life any better on this? Sound? Thanks again!

I have it installed but keep losing my phone/data. It won't recognize my SIM card any suggestions?

Droidman61 said:
I have it installed but keep losing my phone/data. It won't recognize my SIM card any suggestions?
Click to expand...
Click to collapse
What carrier are you with?

[OFFICIAL] [Ten] Lineage 17.1

Reserved
Unofficial builds deleted on April 2nd 2020

Reserved

Hmm

was eagerly waiting for lineage 17 update, downloading,thanks so much dev, let's hope we'll get an official update soon

Huge thanks to the developer, very exciting to have Android 10 up and running on my device, with encryption in place!
PS: I couldn't get the beta version of Open GApps to flash in TWRP - It complained about a missing file in the ROM - I didn't make a note of what it said but I tried BitGApps instead and that worked fine: https://bitgapps.cf/arm64/Q/

P650SE said:
Huge thanks to the developer, very exciting to have Android 10 up and running on my device, with encryption in place!
PS: I couldn't get the beta version of Open GApps to flash in TWRP - It complained about a missing file in the ROM - I didn't make a note of what it said but I tried BitGApps instead and that worked fine: https://bitgapps.cf/arm64/Q/
Click to expand...
Click to collapse
The 20200115 gapps beta build was the problem. The next beta gapps should have it fixed.

so far very stable, everything works fine,the ui is almost perfectly smooth,but sometimes an app takes a milliseconds to get that opening animation running,lineage 16 is perfect in that ,when you tap an app it instantly responded,it needs a little work,but msn is it the best 10 rom out there,smoothest , lineage is the best

Thanks for the rom!
I'm having some issues...
1 - unable to hide apps in trebuchet
2 - unable to expand desktop
For now, only it.. if i found something i will update the reply...

I have an update about the problem I and another user reported in the TG group, where pictures and music were not appearing in the stock apps in Lineage 17 - After a couple of days of using this ROM my pictures and music have randomly started to appear in the stock apps. For some reason it took a few days for them to show up!

P650SE said:
I have an update about the problem I and another user reported in the TG group, where pictures and music were not appearing in the stock apps in Lineage 17 - After a couple of days of using this ROM my pictures and music have randomly started to appear in the stock apps. For some reason it took a few days for them to show up!
Click to expand...
Click to collapse
media scanner was not running,just download 7zipper and run media scanner

I don't see adaptive battery in the settings

Brilliant Rom. Very fast and very good battery. I like him.

Anybody tried any sound mods on this rom...i got bootloop from vuper4android.

redchilis said:
Excellent!
Noticeable changes at first glance:
- Accent color has been replaced by Styles and Wallpaper - Very Cool
- Dark mode toggle in Display
- Option to allow apps to use location only when app is being used (very iOS like and privacy friendly)
- In TWRP on mounting system, LOS apps like AudioFX seem to be in /system/system/priv-app earlier used to be in /system/priv-app
- Encryption works fine
Bugs
- Adding alarm, crashes the clock app
- Changing notification in any app (Signal, Whatsapp) crashes app
Did a clean install using
lineage-17.1-20200114-UNOFFICIAL-z2_plus.zip
open_gapps-arm64-10.0-pico-20200131.zip
Click to expand...
Click to collapse
Is there a way to remove unwanted system apps. When i remove app using link2sd app i got a bootloop.

Can GSI's be flashed on this ROM...??

redchilis said:
Based on this article, "devices" are GSI flashable or not and not ROM's
Based on this list of GSI flashable devices, I'd say the Zuk Z2 Plus isn't GSI flashable ASAIK
I could be wrong, just did a Google search.
Click to expand...
Click to collapse
But, I've flashed many GSI's successfully... So z2 plus is a GSI flashable.
And to flash any GSI we need a proper treble rom(with a good vendor which actually supports flashing any GSI..)..AFAIK

I'm not sure whether it's a bug or not. I tried the new internal audio recording feature of Android 10 with com.kimcy929.screenrecorder, it's not working, nothing but silence was recorded.
Edit: It's working with the browser (with slight lags though). However, it didn't work while playing sound with the built-in file manager.

manashz1 said:
media scanner was not running,just download 7zipper and run media scanner
Click to expand...
Click to collapse
Bruh that PE dev damaged gis phone now give me a solution

LineageOS 17.1 official released
https://download.lineageos.org/z2_plus
note: removed

Develop Bugs

welcome