Can I get some help guys? My phone got bricked after I stupidly installed Chainfire3D, the phone is in a boot loop state for now.
My phone's firmware version is 6.1.A.2.55 and I have an unlocked bootloader, my CWM was gone after flashing 6.1.A.2.55 before but my phone is unlocked and it's USB Debugging is turned ON before I bricked it.
After 2 days of researching, here's what I've got (and tried):
My phone's vibrator is not functioning so I don't know how many times my phone vibrate when I hold Power + Volume Up.
My phone's USB port is faulty, it charges but it can't be recognized on a computer then I found a guide here on the forum about cleaning the USB port using a toothpick, and I think it's working fine now.
I am using Windows 8.1 Pro 64-bit and I found out that there are issues regarding the ADB drivers, I tried some solutions I found online but my phone is still not detected.
I installed a bootable Windows 7 SP1 64-bit on a external HDD and tried to use Flashtool there. I installed the Fastboot, Flash Mode, Xperia Acro S drivers from C:\Flashtool\drivers and still my phone is not detected.
I tried to install Flashtool again from my girlfriend's computer, Windows 7 64-bit, my phone is detected in Flash Mode but can't stay there for long, it will exit Flash Mode then goes to charging, unlike in Fastboot wherein it stays there.
Tried installing Flashtool again from my mom's computer and borrowed her USB cable, it stays in Flash Mode then I tried to flash LT26w_1265-3909_6.1.A.2.55_GENERIC-user_CUST_1266-3278_R4G from there, but it stops with an error Error processing loader.sin, again I did some research about it and then I tried flashing it again, but this time Flashtool didn't gave me an error but it stops at Checking header right after Processing loader.sin
I also tried to flash only the kernel.sin on Fastboot mode but the Flashtool crashed.
Again, from my mom's computer, I installed Sony PC Companion, it was detected as Xperia Acro HD but my mom's computer don't have internet so I wasn't able to try to repair from there.
I also have another question, could it be that my USB port is not functioning? Are there any other methods to make my USB function again aside from bringing it to a service center?
0x013666f said:
Can I get some help guys? My phone got bricked after I stupidly installed Chainfire3D, the phone is in a boot loop state for now.
My phone's firmware version is 6.1.A.2.55 and I have an unlocked bootloader, my CWM was gone after flashing 6.1.A.2.55 before but my phone is unlocked and it's USB Debugging is turned ON before I bricked it.
After 2 days of researching, here's what I've got (and tried):
My phone's vibrator is not functioning so I don't know how many times my phone vibrate when I hold Power + Volume Up.
My phone's USB port is faulty, it charges but it can't be recognized on a computer then I found a guide here on the forum about cleaning the USB port using a toothpick, and I think it's working fine now.
I am using Windows 8.1 Pro 64-bit and I found out that there are issues regarding the ADB drivers, I tried some solutions I found online but my phone is still not detected.
I installed a bootable Windows 7 SP1 64-bit on a external HDD and tried to use Flashtool there. I installed the Fastboot, Flash Mode, Xperia Acro S drivers from C:\Flashtool\drivers and still my phone is not detected.
I tried to install Flashtool again from my girlfriend's computer, Windows 7 64-bit, my phone is detected in Flash Mode but can't stay there for long, it will exit Flash Mode then goes to charging, unlike in Fastboot wherein it stays there.
Tried installing Flashtool again from my mom's computer and borrowed her USB cable, it stays in Flash Mode then I tried to flash LT26w_1265-3909_6.1.A.2.55_GENERIC-user_CUST_1266-3278_R4G from there, but it stops with an error Error processing loader.sin, again I did some research about it and then I tried flashing it again, but this time Flashtool didn't gave me an error but it stops at Checking header right after Processing loader.sin
I also tried to flash only the kernel.sin on Fastboot mode but the Flashtool crashed.
Again, from my mom's computer, I installed Sony PC Companion, it was detected as Xperia Acro HD but my mom's computer don't have internet so I wasn't able to try to repair from there.
I also have another question, could it be that my USB port is not functioning? Are there any other methods to make my USB function again aside from bringing it to a service center?
Click to expand...
Click to collapse
Instead of trying to install rom, try installing cwm, then if cwm is installed and working, you can use that to flash zip through sideload from pc.
Mufrad said:
Instead of trying to install rom, try installing cwm, then if cwm is installed and working, you can use that to flash zip through sideload from pc.
Click to expand...
Click to collapse
Okay sir I will try your suggestion, thanks. Can I install CWM using an SD card?
By the way, I brought my phone at the Sony Service Center here, they told me that they can not repair my phone since their computer couldn't detect it and the phone's problem is the motherboard. My phone has dents on it, so I'm pretty sure that they used it as a reason. And also, they told me that my phone was rooted. I was so frustrated because I know that my phone's problem is the USB since the phone charges and goes into bootloop after installing Chainfire3D.
Hello my dear xda community,
today my zenfone 2 ze551ml 2,3ghz 4gb WW just died.
heres the story:
i plugged it in to charge, then i unplugged it for about 10 minutes and plugged it in again but it didnt charge.
so i tried to reboot and then strange bootloops occured. after a few tries i managed to boot again. after the next reboot it got stuck in bootloop completely.
next i tried to boot into fastboot. sometimes it works sometimes it doesnt. when i want to boot into recovery a dead blinking bot appears and i cannot enter the options.
also sometimes my fastboot shows the serialnumber "0123456789abcdef" and sometimes it shows it correct. another thing is that when im in fastboot mode my pc does not recognize my phone.. no connection sound nothing. not on windows (yes drivers are installed) and not on linux.
only thing i managed was to establish a connection when i restored my bootloader with xfstk downloader. (did not change a thing)
so now when i boot there are 3 things that can happen:
1. dead bot blinking
2. asus boot screen (stuck)
3. bootloop
im having this problem for about 6 hours now and i have no further ideas how to possibly reflash stock firmware without being able to use fastboot (i can enter it but pc wont recognize) and without being able to properly start recovery mode (dead bot BLINKING)
yes my phone was rooted
and no i did not do any updates it just happened
EDIT: forgot to tell you.. when all this started i was able to boot a few times into my os (stock os just debloated) but was not able to charge or connect to pc. also when my phone is turned off and i connect it via usb to the charger or pc, the phone all of a sudden tries to boot
thanks in advance
cheers
Dulu93 said:
Hello my dear xda community,
today my zenfone 2 ze551ml 2,3ghz 4gb WW just died.
heres the story:
i plugged it in to charge, then i unplugged it for about 10 minutes and plugged it in again but it didnt charge.
so i tried to reboot and then strange bootloops occured. after a few tries i managed to boot again. after the next reboot it got stuck in bootloop completely.
next i tried to boot into fastboot. sometimes it works sometimes it doesnt. when i want to boot into recovery a dead blinking bot appears and i cannot enter the options.
also sometimes my fastboot shows the serialnumber "0123456789abcdef" and sometimes it shows it correct. another thing is that when im in fastboot mode my pc does not recognize my phone.. no connection sound nothing. not on windows (yes drivers are installed) and not on linux.
only thing i managed was to establish a connection when i restored my bootloader with xfstk downloader. (did not change a thing)
so now when i boot there are 3 things that can happen:
1. dead bot blinking
2. asus boot screen (stuck)
3. bootloop
im having this problem for about 6 hours now and i have no further ideas how to possibly reflash stock firmware without being able to use fastboot (i can enter it but pc wont recognize) and without being able to properly start recovery mode (dead bot BLINKING)
yes my phone was rooted
and no i did not do any updates it just happened
EDIT: forgot to tell you.. when all this started i was able to boot a few times into my os (stock os just debloated) but was not able to charge or connect to pc. also when my phone is turned off and i connect it via usb to the charger or pc, the phone all of a sudden tries to boot
thanks in advance
cheers
Click to expand...
Click to collapse
hard bricked my phone recently and have the same 123456etc serial. This happened when I flashed boot.img without doing Androidboot.img first. It was a long recovery process,but I did get it recovered; however, I don't think I can fast boot from the bootloader anymore. If you want details for that route I can give them. Basically just search for hard brick. I wouldn't recommend it unless you're desperate. My phone is up and rooted again tho, so I'm happy.
k0rax said:
hard bricked my phone recently and have the same 123456etc serial. This happened when I flashed boot.img without doing Androidboot.img first. It was a long recovery process,but I did get it recovered; however, I don't think I can fast boot from the bootloader anymore. If you want details for that route I can give them. Basically just search for hard brick. I wouldn't recommend it unless you're desperate. My phone is up and rooted again tho, so I'm happy.
Click to expand...
Click to collapse
yeah would be nice if you would guide me how to "recover" my phone again.
i tried flashing an os image via xfstk downloader but it failed probably due to the lack of proper files.
Sounds like you might need a new cable too
Sent from my ASUS_Z00A using Tapatalk
kenbo111 said:
Sounds like you might need a new cable too
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
i dont think so.. tried a few different cables
Dulu93 said:
yeah would be nice if you would guide me how to "recover" my phone again.
i tried flashing an os image via xfstk downloader but it failed probably due to the lack of proper files.
Click to expand...
Click to collapse
What I did was found a raw image that was supposed to flash the whole phone. With Asus flash tool. You need the x.14 version. I couldn't get it to flash my phone but I could see it repartitioning . I pulled the cable after that. Don't reboot. Then flash all the .IMG files from the temp folder. After that, it was stock and took some work getting it unlocked then rooted. After that and having twrp I just reloaded my last saved image.
k0rax said:
What I did was found a raw image that was supposed to flash the whole phone. With Asus flash tool. You need the x.14 version. I couldn't get it to flash my phone but I could see it repartitioning . I pulled the cable after that. Don't reboot. Then flash all the .IMG files from the temp folder. After that, it was stock and took some work getting it unlocked then rooted. After that and having twrp I just reloaded my last saved image.
Click to expand...
Click to collapse
i can only find die x.15 version but i think it should be enough. the problem is that ze2 is not reacting to pc commands when in bootloader.. so i can not operate in with fastboot commands and asus flash tool requires fastboot mode
maybe my last option is to flash my phone via intel phone flash tool which operates via the soc. but i dont have the necessary files. as i remember i would need some flash.xml and image
maybe there is someone who is able to provide files i would need for the intel phone flash tool. i searched but i only could find the flash.xml file for other zenfone models then zenfone 2
Dulu93 said:
maybe there is someone who is able to provide files i would need for the intel phone flash tool. i searched but i only could find the flash.xml file for other zenfone models then zenfone 2
Click to expand...
Click to collapse
tried to flash a raw file via intel phone flash tool but it says that automatic reboot is not supported on this devices and failed to reboot.
any solutions?
Dulu93 said:
tried to flash a raw file via intel phone flash tool but it says that automatic reboot is not supported on this devices and failed to reboot.
any solutions?
Click to expand...
Click to collapse
When using xfstk did it confirm it was able to write the bootloader? Also, what version of Windows? I have 10 and it took booting the Os into a recovery mode and accepting the drivers even though they weren't signed. In the offset or write settings in xfstk I had five zeroes. I heard someone use 4, but the majority said 5. I used 5. Are you able to see the boot screen as a 4 color box?
Dulu93 said:
tried to flash a raw file via intel phone flash tool but it says that automatic reboot is not supported on this devices and failed to reboot.
any solutions?
Click to expand...
Click to collapse
OK, I think I've figured it out. Realized my phone was crashing when I went to make a call. RessurectionRemix formatted my SD card and wasn't readable anymore, so frustrated I said f**k it, let's start over.
1) it's 4 zeros, not 5.
You'll notice when you're flashing with xFSTK Downloader it attempts to flash twice. It appears the first flash is for the bootloader, and the second is for OS. It needs to flash both. I could not get it to flash both until I updated the GP Flag Override Value to 0x80000807. Then it went without a hitch.
2) install fastboot and adb with the driver package.
It's on the site here. Once I did that the ASUS Flash tool did its thing. For those wondering if it's doing something or not - the answer is, if the phone looks like it's not doing anything - it's not doing anything. After I installed adb and fastboot, along with the drivers, it took about 5 minutes to flash end to end without a hitch.
So the takeaway is - if it's flashing the first portion, you have connectivity to the phone - but that does NOT mean adb/fastboot will have connectivity like it should. That takes the special google drivers. Also, it needs to flash TWICE for xFSTK. If it doesn't do both, things will be broken.
I found a raw image that was quite old 2.15.40.13 on asus-zenfone.com. password for zip is asus-zenfone.com. I've flashed that, and about to update to 2.19.40.20 to do the unlock. Rooting with one click root worked fine, but unlock I don't know did. So I'm getting the specific version it says it works for. I'll post an update when that's done.
Cheers
Unfortunately that didn't resolve my phone dialing, crashing the phone problem. :L
---------- Post added at 06:29 AM ---------- Previous post was at 06:21 AM ----------
k0rax said:
Unfortunately that didn't resolve my phone dialing, crashing the phone problem. :L
Click to expand...
Click to collapse
This did:
Make sure you go to settings-->apps-->default apps and select the dialer as your default application to make calls.
k0rax said:
OK, I think I've figured it out. Realized my phone was crashing when I went to make a call. RessurectionRemix formatted my SD card and wasn't readable anymore, so frustrated I said f**k it, let's start over.
1) it's 4 zeros, not 5.
You'll notice when you're flashing with xFSTK Downloader it attempts to flash twice. It appears the first flash is for the bootloader, and the second is for OS. It needs to flash both. I could not get it to flash both until I updated the GP Flag Override Value to 0x80000807. Then it went without a hitch.
2) install fastboot and adb with the driver package.
It's on the site here. Once I did that the ASUS Flash tool did its thing. For those wondering if it's doing something or not - the answer is, if the phone looks like it's not doing anything - it's not doing anything. After I installed adb and fastboot, along with the drivers, it took about 5 minutes to flash end to end without a hitch.
So the takeaway is - if it's flashing the first portion, you have connectivity to the phone - but that does NOT mean adb/fastboot will have connectivity like it should. That takes the special google drivers. Also, it needs to flash TWICE for xFSTK. If it doesn't do both, things will be broken.
I found a raw image that was quite old 2.15.40.13 on asus-zenfone.com. password for zip is asus-zenfone.com. I've flashed that, and about to update to 2.19.40.20 to do the unlock. Rooting with one click root worked fine, but unlock I don't know did. So I'm getting the specific version it says it works for. I'll post an update when that's done.
Cheers
Click to expand...
Click to collapse
thank you very much for your help.
the first point chaning it to 4 zeros did the trick. i was able to reinstall the bootloader.
but i still dont have connectivity via fastboot. im sure all drivers are installed and even on linux i cant see my phone. what is that special google driver?
k0rax said:
When using xfstk did it confirm it was able to write the bootloader? Also, what version of Windows? I have 10 and it took booting the Os into a recovery mode and accepting the drivers even though they weren't signed. In the offset or write settings in xfstk I had five zeroes. I heard someone use 4, but the majority said 5. I used 5. Are you able to see the boot screen as a 4 color box?
Click to expand...
Click to collapse
with 5 zeros it only loaded the firmware but skipped the os. with 4 zeros it loaded both. and yes i was able to see the colorbox.
im using windows 10 and what drivers do you mean? i installed the 15s driver package from xda
Dulu93 said:
with 5 zeros it only loaded the firmware but skipped the os. with 4 zeros it loaded both. and yes i was able to see the colorbox.
im using windows 10 and what drivers do you mean? i installed the 15s driver package from xda
Click to expand...
Click to collapse
This did it for me:
http://forum.xda-developers.com/showthread.php?p=48915118
After installing that, Asus flash tool worked for me
Also I found it will sometimes stall during flash. After partition and before flashing. If it doesn't show anything changing on the phone for 2-3 minutes, (except when it's flashing system), cose the app, make sure fastboot, fastboot2, and adb are all closed, and try again. Make sure to launch AFT as administrator.
Don't forget to catch the first boot before it loads the OS - AFT reboots once complete - and run unlock tool right then. if you miss it you have to start over.
k0rax said:
This did it for me:
http://forum.xda-developers.com/showthread.php?p=48915118
After installing that, Asus flash tool worked for me
Also I found it will sometimes stall during flash. After partition and before flashing. If it doesn't show anything changing on the phone for 2-3 minutes, (except when it's flashing system), cose the app, make sure fastboot, fastboot2, and adb are all closed, and try again. Make sure to launch AFT as administrator.
Don't forget to catch the first boot before it loads the OS - AFT reboots once complete - and run unlock tool right then. if you miss it you have to start over.
Click to expand...
Click to collapse
installed this package but still no luck.. even tried with freshly installed win7 but no luck. my fastboot mode is not being recognized
Dulu93 said:
installed this package but still no luck.. even tried with freshly installed win7 but no luck. my fastboot mode is not being recognized
Click to expand...
Click to collapse
Try a different USB port. On the back of the computer. For whatever reason that made a difference for me. I couldn't use the front ones.
---------- Post added at 09:16 PM ---------- Previous post was at 09:05 PM ----------
Dulu93 said:
installed this package but still no luck.. even tried with freshly installed win7 but no luck. my fastboot mode is not being recognized
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
1.1 - Install IntelSocUSB
-First, Please disconnect the machine Zenfone your 2.
-Download Driver IntelSocUSB here:
http://drive.google.com/file/d/0B2oM...ew?usp=sharing
If you're using Windows 7:
Right-click the file -Click iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
-Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"
-After This step, the driver installation is finished, continue to section 1.2 for connecting IntelSoc regime
Also iV you're using a virtualized environment I've heard people have had trouble. Try native if you can. The second part of the flash is fastboot. I don't remember the version I used. I'll check when I get home
k0rax said:
Try a different USB port. On the back of the computer. For whatever reason that made a difference for me. I couldn't use the front ones.
---------- Post added at 09:16 PM ---------- Previous post was at 09:05 PM ----------
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
1.1 - Install IntelSocUSB
-First, Please disconnect the machine Zenfone your 2.
-Download Driver IntelSocUSB here:
http://drive.google.com/file/d/0B2oM...ew?usp=sharing
If you're using Windows 7:
Right-click the file -Click iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
-Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"
-After This step, the driver installation is finished, continue to section 1.2 for connecting IntelSoc regime
Also iV you're using a virtualized environment I've heard people have had trouble. Try native if you can. The second part of the flash is fastboot. I don't remember the version I used. I'll check when I get home
Click to expand...
Click to collapse
ok.. lets summarize what i did:
1. installed adb/fastboot driver package
2. installed intel dnx driver (with isocusbdriver iwasnt able to open xfstk)
3. installed asus flash tool
4. installed xfstk downloader
5. loaded fw + os with xfstk downloader (successful)
-----
6. while in bootloader i connected my phone to the pc and tried to use asus flash tool (as admin) - not listing devices
i tried every usb port i have and several different cables, nothing helps
im slowly giving up... in the attachments you have snapshots how it looks like when im connected and in fastboot mode. to make sure no dead drivers are in my way im on a freshly installed win10
EDIT: now something happened. i flashed bootloader via xfstk, then i powered off my phone and connected it again. then for a second AFT showed my serial number, but the state was a red X
after i restore my bootloader via xfstk. what do i have to do so AFT can see my phone? what you can see in the attachments is all i get from AFT.. but i dont know how to stay connected
Dulu93 said:
ok.. lets summarize what i did:
1. installed adb/fastboot driver package
2. installed intel dnx driver (with isocusbdriver iwasnt able to open xfstk)
3. installed asus flash tool
4. installed xfstk downloader
5. loaded fw + os with xfstk downloader (successful)
-----
6. while in bootloader i connected my phone to the pc and tried to use asus flash tool (as admin) - not listing devices
i tried every usb port i have and several different cables, nothing helps
im slowly giving up... in the attachments you have snapshots how it looks like when im connected and in fastboot mode. to make sure no dead drivers are in my way im on a freshly installed win10
EDIT: now something happened. i flashed bootloader via xfstk, then i powered off my phone and connected it again. then for a second AFT showed my serial number, but the state was a red X
after i restore my bootloader via xfstk. what do i have to do so AFT can see my phone? what you can see in the attachments is all i get from AFT.. but i dont know how to stay connected
Click to expand...
Click to collapse
You can leave flash tool and xfstk open same time. I flashed with xfstk, waited some time and moves between the bootloader options. Make sure no residual adb or fastboot exes are running. Then unplug the phone and plug it back in. Then it will show up. Select the option you have and click start. See if the bootloader shows any life or incoming partitioning happening . If that doesn't work reboot to bootloader scroll around in it to make sure it's loaded , it brings in the correct serial intermittently. But I don't think it's necessary.
---------- Post added at 12:42 AM ---------- Previous post was at 12:37 AM ----------
So xfstk reboots
Xfstk round two no reboot scroll around
AFT
Unplug USB from phone and reconnect
Should show up .
Then click start. Did it give an error with that X?
Look at processes and see if it's launched adb or fastboot
Dulu93 said:
ok.. lets summarize what i did:
1. installed adb/fastboot driver package
2. installed intel dnx driver (with isocusbdriver iwasnt able to open xfstk)
3. installed asus flash tool
4. installed xfstk downloader
5. loaded fw + os with xfstk downloader (successful)
-----
6. while in bootloader i connected my phone to the pc and tried to use asus flash tool (as admin) - not listing devices
i tried every usb port i have and several different cables, nothing helps
im slowly giving up... in the attachments you have snapshots how it looks like when im connected and in fastboot mode. to make sure no dead drivers are in my way im on a freshly installed win10
EDIT: now something happened. i flashed bootloader via xfstk, then i powered off my phone and connected it again. then for a second AFT showed my serial number, but the state was a red X
after i restore my bootloader via xfstk. what do i have to do so AFT can see my phone? what you can see in the attachments is all i get from AFT.. but i dont know how to stay connected
Click to expand...
Click to collapse
I think you're close - it's flashing what's needed, and recognized the phone, although it did for me also but fastboot didn't work until the drivers with adb and fastboot. The last things I would think is reinstall the Google adb fastboot drivers with the phone connected to the USB port that got you this far, and if there is some serial no verification, look for .14 version of AFT.
Hi everyone,
My zenfone 2 ZE551ML is bricked, so i followed this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
The problem comes when i arrived to the step of IntelSoc:
I install it, no problem until here, i got IntelSoc driver in my device manager .
But when i want to have the MOOREFIELD driver, I cant get it. Following this perfectly
Ash back to the Zenfone 2, shutdown, press simultaneously the key "source" + "volume +", of course you will see a screen hanging cables( I don't have hanging cables though, I just have the Logo Asus and write on the top in blue Fastboot mod !!!).
-Connect to your computer via USB cable, to standard Intel SOC driver position, wait a few seconds if the current add an item immediately below another MOOREFIELD new devices is successful.
-If You have not been, the test performed as follows: turn off the machine, plug the cable into the computer, press the power button until the device vibrates slightly, then release.
If you have an idea can you help me please. I think this is the only thing who blocks me in repairing my phone...
Thank you
Yea that problem also persists with my zenfone 2,cant install moorefield 'cause pc cant recognize my phone. Somebody please help us out.
Anagh21 said:
Yea that problem also persists with my zenfone 2,cant install moorefield 'cause pc cant recognize my phone. Somebody please help us out.
Click to expand...
Click to collapse
it is clearly instructed in that thread you mentioned. just keep few things in mind.. uninstall every mobile related driver before installing isoc. uninstall xFSTK tool if you already installed it before installing isoc. third as you are concerned about the line you mentioned morefield under intel soc. well during soc install you will see windows like attached below. at this stage you need to power cycle your device . ( turn off your device holding power button for 10 sec. then connect to pc and turn on. leave connected to pc and turn off again and turn on second time to make sure so driver are installed) don't worry if you don't see morefield under soc now. just go ahead and install xFSTK. now your concern that your device don't stays in morefield download stage ( i mean it appears in device manager and disapear) . after installing xFSTK. run it as administrator and load files. and change gp flag value. also change device detection timeout to 120. now click begin download it will start waiting for device. now turn off your device completely and connect to pc and turn on. xFSTK will force it to stay in required mode. if download do not starts. just power cycle the device while being connected to the tool.
( note: it is strongly recomended that you install isoc and connect mobile before installing. if you have already installed xFSTK then plz uninstall it and install it after performing above said steps. remove all other mobile related drivers also and if you are using windows 8 or 10 disable driver signature enforcement again even if you did it earlier)
The problem with asus flash tool solved
Solution : Open device manager i.r. Windows + X .... if your phone is not being detected... switch it on and off ... there will be ( other devices menu ) that will show your phone there..
right click on the phone , click update drivers, ofcoarse no drivers online, locate the drivers manually , wherever your bootloader file is i.e. the 1 gb file you download or the raw file as we can speak ... i didn't pin pointed it ... my file was on the desktop so I just chose desktop and it searched it and installed it.
After that the phone was successfully in the computer and being detected by the flash tool.
It's a Voyo's i8 pro 4G, i downloaded the officialy android 7 rom and used sp flash tool to flash the rom.
I choose the official scatter file and it'd loaded successfully.
I clicked download and connected my "power-off" tablet to win 10 via USB, it quickly recognized my tab and showed hardware info on the bottom right...
i went on for a sec and then a windowed message popped up that said something about "download...", it disappeared quickly and then everything stopped, nothing change on progress bar ....
i waited for a while and decided to quit... disconnected my tab and close the program, hoping to start everything again...
no USB detection of my tab, the tablet doesn't even turn on now, screen is all BLACK...NOTHING.....
tried to installed MTK USB driver in win 10 ( followed online guides) but got code 10....
May I ask what else I can do now? any advise will be greatly appreciated! THX!
Just reflash with SP-Flash Tool. If SP-Flash Tool doesn't detect your device you need to unplug the Battery and connect it after that to your PC