Develop Bugs

Stock Firmware of LeTv Le1S x507&x509 Sp Flashable Indian Version 100% tested

100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
​
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Ctrl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition​
Firmware x507&x509 5.5.014s:- ​
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-​
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view​
Mtk Preloder Driver:-​​
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-​​
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................​​

after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger

Followed everything, but not able to install recovery

https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................

jagdish1747 said:
after flash this file now phone is total dead , not connected to pc only red light when plug usb or charger
Click to expand...
Click to collapse
Go to fastboot .connect pc
Enter fastboot -w
it will wipe everything thing including data
Reboot to fastboot again
Connect pc
Enter fastboot flash recovery recovery.img (download any recovery)
Reboot to recovery ..flash any os zip
Use volume down+power for fastboot
Use volume up+power for recovery

Where should i enter fastboot -w ???

Kiranshyd said:
Where should i enter fastboot -w ???
Click to expand...
Click to collapse
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...

Ubd debugging​ not enabled, mobile dead
light, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
joshi1 said:
Vol down+power it will open fastboot mode ..connect usb
If u have mfastboot files open that folder and open cmd from there
If fastboot unlocked u can use fastboot -w directly orelse u have to unlock it first
Need guide regarding fastboot and files u can google them or xda ...
Click to expand...
Click to collapse
My mobile dead, only red light coming, it means usb debugging not enabled now, so fastboot command will work or not?? If works, how, wat to do., Please explain bro

https://docs.google.com/file/d/0B2ghGhwyFr5hOWxvZWdBR3VkRlE/view
Download this and extract to your desktop go to the folder
Hold left shift+ right click mouse u will get open command here it will open command window
Disconnect pc and mobile.
Switchoff mobile
Hold volume down +power u will enter fastboot mode
Connect pc now ... Pc will download drivers and install
If u never heard of oem lock ... First install adb drivers from here https://drive.google.com/file/d/0B8HspVLwTTxtWWJsYnNJR2kxeEE/view
Then preloader by this guide
https://forum.xda-developers.com/showthread.php?t=2180436
Now open command prompt .. type
fastboot devices
U will get ur mobile there
Type
Fastboot oem unlock
It will unlock ur device ..
Then type
Fastboot -w
It will wipe everything
Download twrp.img from forum and rename it as recovery
https://dl.twrp.me/x3/twrp-3.1.1-0-x3.img.html
Place it in the same folder of fastboot
Type
Fastboot flash recovery recovery.img
It will show writing done or okay
Now hold volume up+power this will lead u to recovery
Download any rom and flash it

Thanks , My device is X500. Can i flash it?

I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?

hypermaster said:
I am on custom rom (AOKP) , rooted with TWRP.
Is there any way to flash the Stock ROM directly from TWRP ?
Click to expand...
Click to collapse
Yes change updater script or just find 19s twrp flashable file

phone is dead after flash model x509

nrisnadeem said:
phone is dead after flash model x509
Click to expand...
Click to collapse
Cool, now buy a new phone

mannuelectronics said:
https://ibb.co/kfvxa5
I GOT THIS ERROR..............................................
Click to expand...
Click to collapse
getting same error

My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?

Sanjay354 said:
My display is not working, it won't respond to touch. I successfully flashed the ROM twice but the problem is still there.please help.
PS- I recently changed my screen while I was on a custom ROM. Does thatchange anything?
Click to expand...
Click to collapse
Your screen is the problem. 3rd Party displays

Abhi_ said:
Your screen is the problem. 3rd Party displays
Click to expand...
Click to collapse
------------------------------------------------------------------------------------
any idea on how to solve it? {im thinking i might be able to use my phone with a mouse and otg,although i haven't tried it yet}

Help
i am currently on Eui 5.5.014s and cannot update to latest Eui version please help !!!!!!!!!

NO Update Coming
naeem210 said:
100% Tested Stock Firmware of LeTv Le1S x507&x509 Indian Version
5.5.014s
​
How To Flash
Follow this...
Extract "X507_Stock_Rom.rar" and install MTK_USB_Windows_Driver drivers inside rar file
1. Goto "SP_Flash_Tool" folder and open "flash_tool.exe"
2. Select "Download-Agent" as "MTK_AllInOne_DA"
3. Select "Scatter file" from "X507_Stock_Rom" folder
now all files will be selected.
4. Change "Download Only" to " Firmware Upgrade"
5. Now Very Imp Step Press together Cntl+Alt+S
This will Enable "Security Mode" and "Authentication File"
option will be Visible below "Scatter file" option.
6. Now Click on "Auth File" Option and Select "auth_sv5.auth"
file From SP_Flash_Tool" Folder
7. Hit "Download" Button.
8. Press volume up key and
Connect USB cable to mobile in Powered Off Condition​90
Firmware x507&x509 5.5.014s:- ​
https://drive.google.com/uc?id=0B2Ddi-DetFSLRjJrSk9abmM4Tms&export=download
Sp Tool:-​
https://drive.google.com/file/d/0B5KBP3GG99Q2QUF1VjFmQWs5TFE/view​
Mtk Preloder Driver:-​​
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
Video Guide:-​​
https://www.youtube.com/watch?v=cUijr0JXl8c
Hit thanks if u like my work.........................​​
Click to expand...
Click to collapse
Can Anyone tell me why there is no update coming or when i try to install the update from the recovery of local update it says Failed to update -- cause : error with signature help me i want to update eui 5.5 to 5.8 pls

HELP!! HARD BRICK (Mega Unbrick Guide DOESN'T WORK)

SOLVED
I can't boot into recovery (op logo displayed for about 10 seconds, then the screen became black)
ore boot the system (op logo is displayed for about 0.1 seconds, then the screen became black)
i've already tried to follow the steps in Mega Unbrick Guide, but i can't "Make the device show as Qualcomm 9008" also after have followed the
appropriate guide)
please help me!
if someone succeeds to solve the problem i'll pay him/her via paypal
Thaks!!

Go to Oneplus website and download oxygen os version 3.2.4 OTA and flash that via adb sideload , also as a sidenote use your PC to boot into fastboot mode and try flashing the firmware that way if the first method doesn't work....

how?
Xceeder said:
Go to Oneplus website and download oxygen os version 3.2.4 OTA and flash that via adb sideload , also as a sidenote use your PC to boot into fastboot mode and try flashing the firmware that way if the first method doesn't work....
Click to expand...
Click to collapse
i can't flash via adb sideload because i have can't boot into recovery.
How can i flash into fastboot mode? what have i to tipe?

Plug phone into PC and type - adb reboot bootloader , this should enter fastboot mode then use the adb commands to flash the firmware which should be adb sideload oxygenos.zip just obviously rename the OTA zip file to oxygenos before running the command... Hope this helps buddy.

What were you doing actually? And is your bootloader unlocked?

Xceeder said:
Plug phone into PC and type - adb reboot bootloader , this should enter fastboot mode then use the adb commands to flash the firmware which should be adb sideload oxygenos.zip just obviously rename the OTA zip file to oxygenos before running the command... Hope this helps buddy.
Click to expand...
Click to collapse
I've tried, but after imput "adb sideload oxygenos.zip" command
appear this phrase "loading oxigenos.zip" and then an error:
cannot read oxigenos.zip

zTweaked said:
What were you doing actually? And is your bootloader unlocked?
Click to expand...
Click to collapse
yes, my bootloader is unlocked,
i've tried to flash via adb but after imput "adb sideload oxygenos.zip" command
appear this phrase "loading oxigenos.zip" and then an error:
"cannot read oxigenos.zip"
i've put the renamed zip on desktop and in "c\program files (x86)\minimal adb and fastboot" directory

Hi, if you hold down volume up and power button for at least 20 seconds and release, make sure you have downloaded universal adb drivers and op3 drivers also, when you have these run the tool, the tool I originally downloaded was corrupt, the unbrick tool must have the system.img, recovery img etc.... For it to work, you will know when it's connect as one line in the programme will change. I can send you the files needed if you send me your email address.
---------- Post added at 01:41 PM ---------- Previous post was at 01:37 PM ----------
TheReverend98 said:
yes, my bootloader is unlocked,
i've tried to flash via adb but after imput "adb sideload oxygenos.zip" command
appear this phrase "loading oxigenos.zip" and then an error:
"cannot read oxigenos.zip"
i've put the renamed zip on desktop and in "c\program files (x86)\minimal adb and fastboot" directory
Click to expand...
Click to collapse
Hi,
Are you running the command window from that folder where adb is? Push tab and right click mouse button or right on laptop to access run command option

[email protected] said:
Hi, if you hold down volume up and power button for at least 20 seconds and release, make sure you have downloaded universal adb drivers and op3 drivers also, when you have these run the tool, the tool I originally downloaded was corrupt, the unbrick tool must have the system.img, recovery img etc.... For it to work, you will know when it's connect as one line in the programme will change. I can send you the files needed if you send me your email address.
---------- Post added at 01:41 PM ---------- Previous post was at 01:37 PM ----------
Hi,
Are you running the command window from that folder where adb is? Push tab and right click mouse button or right on laptop to access run command option
Click to expand...
Click to collapse
yes, i'm running the command window from that folder where adb is,
but i've tiped
:\Program Files (x86)\Minimal ADB and Fastboot>fastboot update oxigenos.zip
archive does not contain 'android-info.txt'
error: update package 'oxigenos.zip' has no android-info.txt
because i can operate only in fastboot mode

Are you sure you are typing it right because you keep typing oxigenos instead of oxygenos ...

Xceeder said:
Are you sure you are typing it right because you keep typing oxigenos instead of oxygenos ...
Click to expand...
Click to collapse
oh..sorry! sometimes when i write in english i do some errors with the letters
anyway, this wasn't the problem, 'cause i had renamed the rom's zip in the same way
now i'm booting cm, hope it works all right!

Go to blusparks kernel thread from there download the latest recovery. Boot your phone into fastboot, then flash that recovery. Boot into recovery then flash whatever you wish!
Here is the recovery:
http://forum.xda-developers.com/devdb/project/dl/?id=21065

TheReverend98 said:
oh..sorry! sometimes when i write in english i do some errors with the letters
anyway, this wasn't the problem, 'cause i had renamed the rom's zip in the same way
now i'm booting cm, hope it works all right!
Click to expand...
Click to collapse
Did it work??
Also I just wanted to ask. Were you on the Oxygen OS Community Builds when this happened?

AJay27 said:
Did it work??
Also I just wanted to ask. Were you on the Oxygen OS Community Builds when this happened?
Click to expand...
Click to collapse
yes, anyway, i solved the problem

how did you solved the problem? could you please explain? so that we can solve it if anyone of us faces this problem...

solving
sahed01 said:
how did you solved the problem? could you please explain? so that we can solve it if anyone of us faces this problem...
Click to expand...
Click to collapse
I've installed this tool: http://forum.xda-developers.com/showthread.php?t=2317790
then manually booted the phone into fastboot mode
in the directory of Minimal ADB and Fastboot i've put the twrp-3.0.2-22-oneplus3.img and renamed the file into twrp
then i've flashed the file with this command: fastboot flash recovery twrp.img
once booted into recovery i've paste the cyanogenmod rom file into the phone and installed by the classic way (WIPE cache, sys, data, davilk//INSTALL cm file// OPTIONAL INSTALL gapps, kernel, su)
restart the phone, done!

TheReverend98 said:
I've installed this tool: http://forum.xda-developers.com/showthread.php?t=2317790
then manually booted the phone into fastboot mode
in the directory of Minimal ADB and Fastboot i've put the twrp-3.0.2-22-oneplus3.img and renamed the file into twrp
then i've flashed the file with this command: fastboot flash recovery twrp.img
once booted into recovery i've paste the cyanogenmod rom file into the phone and installed by the classic way (WIPE cache, sys, data, davilk//INSTALL cm file// OPTIONAL INSTALL gapps, kernel, su)
restart the phone, done!
Click to expand...
Click to collapse
.
thank you for sharing this! ?

[email protected] said:
Hi, if you hold down volume up and power button for at least 20 seconds and release, make sure you have downloaded universal adb drivers and op3 drivers also, when you have these run the tool, the tool I originally downloaded was corrupt, the unbrick tool must have the system.img, recovery img etc.... For it to work, you will know when it's connect as one line in the programme will change. I can send you the files needed if you send me your email address.
---------- Post added at 01:41 PM ---------- Previous post was at 01:37 PM ----------
Hi,
Are you running the command window from that folder where adb is? Push tab and right click mouse button or right on laptop to access run command option
Click to expand...
Click to collapse
Hi Gary can you send me the files to email [email protected] because I'm having the same issues. Thanks

my zen faild google verification to boot up

hey
when my phone boots shows that my device is not verified by google , what to do?

Jwtiyar said:
hey
when my phone boots shows that my device is not verified by google , what to do?
Click to expand...
Click to collapse
you might have unlocked bootloader with unofficial method. nothing to worry about its just a warning devices are far more insecure. if you are worried about privacy things. believe there is nothing like secure when using digital devices. and there is not even single service provider which do not collect data. hence enjoy your unlocked device and play around

sukhwant717 said:
you might have unlocked bootloader with unofficial method. nothing to worry about its just a warning devices are far more insecure. if you are worried about privacy things. believe there is nothing like secure when using digital devices. and there is not even single service provider which do not collect data. hence enjoy your unlocked device and play around
Click to expand...
Click to collapse
Thank you bro, the problem is now its not booting (bootlooping)after upgrading bootloader, flashing twrp then flashing RBR ROM, IDK if this is ROM related or bootloader related

Jwtiyar said:
Thank you bro, the problem is now its not booting (bootlooping)after upgrading bootloader, flashing twrp then flashing RBR ROM, IDK if this is ROM related or bootloader related
Click to expand...
Click to collapse
flash boot, fastboot, recovery image for the same firmware u had working last time. if still do not boots. flash bom token, dnx, ifwi for the same firmware. flash boot, recovery and fastboot again while u flash dnx and ifwi.

sukhwant717 said:
flash boot, fastboot, recovery image for the same firmware u had working last time. if still do not boots. flash bom token, dnx, ifwi for the same firmware. flash boot, recovery and fastboot again while u flash dnx and ifwi.
Click to expand...
Click to collapse
You made it really complex bro i dont understand what to do.

Jwtiyar said:
You made it really complex bro i dont understand what to do.
Click to expand...
Click to collapse
the last working firmware. whichever was installed last time. (assume you were on latest MM ww4.21.40.233... extract it and get the files (boot.img, recovery.img, droidboot.img, splashscreen.img) in the same firmware there will be ifwi.zip extract that too and get the files (bom token, dnx , ifwi)... now copy the extracted files to adb fastboot tool folder. and then in same folder move cursor to and empty place and hold shift and right click on mouse. you will get option open command windows here.
now reboot your phone in fastboot mode and connect to PC.. now run the following commands
fastboot devices ( to see if device is recognized by pc and fastboot tool)
fastboot flash splashscreen splashscreen.img
fastboot flash token " bom token file name" (without commas )
fastboot flash dnx "dnx file name"
fastboot flash ifwi "ifwi file name"
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase fastboot
fastboot flash fastboot droidboot.img
fastboot reboot
keep in mind extract files from the same firmware you were on the last time when your device was working.

sukhwant717 said:
the last working firmware. whichever was installed last time. (assume you were on latest MM ww4.21.40.233... extract it and get the files (boot.img, recovery.img, droidboot.img, splashscreen.img) in the same firmware there will be ifwi.zip extract that too and get the files (bom token, dnx , ifwi)... now copy the extracted files to adb fastboot tool folder. and then in same folder move cursor to and empty place and hold shift and right click on mouse. you will get option open command windows here.
now reboot your phone in fastboot mode and connect to PC.. now run the following commands
fastboot devices ( to see if device is recognized by pc and fastboot tool)
fastboot flash splashscreen splashscreen.img
fastboot flash token " bom token file name" (without commas )
fastboot flash dnx "dnx file name"
fastboot flash ifwi "ifwi file name"
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase fastboot
fastboot flash fastboot droidboot.img
fastboot reboot
keep in mind extract files from the same firmware you were on the last time when your device was working.
Click to expand...
Click to collapse
Thank you very much bro,but the last working firmware i dont know which one was but it was 5.1.1, which firmware is that android version?

Jwtiyar said:
Thank you very much bro,but the last working firmware i dont know which one was but it was 5.1.1, which firmware is that android version?
Click to expand...
Click to collapse
device model ze551ml oe ze550ml?

sukhwant717 said:
device model ze551ml oe ze550ml?
Click to expand...
Click to collapse
ze551

Jwtiyar said:
ze551
Click to expand...
Click to collapse
download the following file extract it. now reboot your phone in fastboot mode and connect to pc. wait till pc recognize it and make detection sound.
now it extracted folder double click to run the file update bootloader.bat
all done
report back if device boots or gives any error in cmd
wait it has an error

sukhwant717 said:
download the following file extract it. now reboot your phone in fastboot mode and connect to pc. wait till pc recognize it and make detection sound.
now it extracted folder double click to run the file update bootloader.bat
all done
report back if device boots or gives any error in cmd
wait it has an error
Click to expand...
Click to collapse
before this problem happen i upgraded boorloader to MM then flash TWRP and installed MM ROM so now it has MM Custom ROM.
i did your solution and installed successfully but in adb commands as i saw give that boot.img not found then rebooted and now directly will go to installing system update and give the error (android robot with red warning icon ) .

Jwtiyar said:
before this problem happen i upgraded boorloader to MM then flash TWRP and installed MM ROM so now it has MM Custom ROM.
i did your solution and installed successfully but in adb commands as i saw give that boot.img not found then rebooted and now directly will go to installing system update and give the error (android robot with red warning icon ) .
Click to expand...
Click to collapse
when there at that error screen press and hold volume button you will enter into recovery mode. there go to option reboot bootloader phone will boot in fastboot mode
now in the extracted folder at empty place shift and right click.. then open cmd here and run command
fastboot flash boot boot.img
fastboot reboot
which mm rom you installed?
btw i have corrected the boot.img not found error. you can download and rung the bat file
https://drive.google.com/open?id=0B72QQTXqZSRwSVpwSG9iWS0tbUk

sukhwant717 said:
when there at that error screen press and hold volume button you will enter into recovery mode. there go to option reboot bootloader phone will boot in fastboot mode
now in the extracted folder at empty place shift and right click.. then open cmd here and run command
fastboot flash boot boot.img
fastboot reboot
which mm rom you installed?
btw i have corrected the boot.img not found error. you can download and rung the bat file
https://drive.google.com/open?id=0B72QQTXqZSRwSVpwSG9iWS0tbUk
Click to expand...
Click to collapse
I installed RBR ROM which based on MM , now the error gone after flashing boot.img but the will boot to asus logo and will reboot again it seems its bootloop .

sukhwant717 said:
when there at that error screen press and hold volume button you will enter into recovery mode. there go to option reboot bootloader phone will boot in fastboot mode
now in the extracted folder at empty place shift and right click.. then open cmd here and run command
fastboot flash boot boot.img
fastboot reboot
which mm rom you installed?
btw i have corrected the boot.img not found error. you can download and rung the bat file
https://drive.google.com/open?id=0B72QQTXqZSRwSVpwSG9iWS0tbUk
Click to expand...
Click to collapse
this is the output now after flashing coorected .zip file you provided:
http://paste.ubuntu.com/24395746/

Jwtiyar said:
this is the output now after flashing coorected .zip file you provided:
http://paste.ubuntu.com/24395746/
Click to expand...
Click to collapse
it is bootlooping because of incorrect system
now tell me do u want to flash custom rom or official marshmallow?

sukhwant717 said:
it is bootlooping because of incorrect system
now tell me do u want to flash custom rom or official marshmallow?
Click to expand...
Click to collapse
custom MM

Jwtiyar said:
custom MM
Click to expand...
Click to collapse
as you already downloaded that rom.. and also the recovery needed for that rom..
first of all same as earlier flash MM bootloader. ther reboot bootloader once then flash twrp. the exactly mentioned in the RBR rom thread. then go to advanced in twrp and click adb sidelaod. tick wipe dalvik cache and cache. swipe to sideload ... now run command adb sideload "rom file name"
if bootloops after flashing firmware. do a factory reset and reboot. going to sleep now 1.15 AM here. will answer tomorrow if any other question

sukhwant717 said:
as you already downloaded that rom.. and also the recovery needed for that rom..
first of all same as earlier flash MM bootloader. ther reboot bootloader once then flash twrp. the exactly mentioned in the RBR rom thread. then go to advanced in twrp and click adb sidelaod. tick wipe dalvik cache and cache. swipe to sideload ... now run command adb sideload "rom file name"
if bootloops after flashing firmware. do a factory reset and reboot. going to sleep now 1.15 AM here. will answer tomorrow if any other question
Click to expand...
Click to collapse
thank you very much now its booted successfully

Jwtiyar said:
thank you very much now its booted successfully
Click to expand...
Click to collapse
great good to know your device is alive again

sukhwant717 said:
great good to know your device is alive again
Click to expand...
Click to collapse
Thank you bro

How to LOAD Android OS to A2 Lite??? Need Help Urgently!!!

i need help urgently with my A2 Lite. from TWRP it says cannot mount "./system" :crying:. During boot it says "no OS found" . Help to get it back up and running is greatly appreciated.

agbadino said:
i need help urgently with my A2 Lite. from TWRP it says cannot mount "./system" :crying:. During boot it says "no OS found" . Help to get it back up and running is greatly appreciated.
Click to expand...
Click to collapse
Hi, which system was the last system you used?
Are you aware of ADB and fastboot and which OS do your pc use?

Voodoojonny said:
Hi, which system was the last system you used?
Are you aware of ADB and fastboot and which OS do your pc use?
Click to expand...
Click to collapse
am aware of ADB and Fastboot generally speaking.
my computer is windows, dats wat am more familiar with. any suggestions or solutions? thanks

agbadino said:
am aware of ADB and Fastboot generally speaking.
my computer is windows, dats wat am more familiar with. any suggestions or solutions? thanks
Click to expand...
Click to collapse
So the easy way should be repairing your file-system of your system partition and reflashing your system partition.
1. go to twrp and select wipe -> advanced wipe -> select "system" and press the button "change or repair filesystem" -> "repair filesystem"
2. flash your system partition: download the fastboot rom you used before your system got broken from here
3. Extract rom and copy system.img to your fastboot folder
4. If you use windows 10: shift+right click somewhere in the white area of your fastboot folder "open power shell window here" - on windws 7 it will be open command prompt here...
5. flash system (windows 10 - for windows 7 copy code without ./)
Code:
./fastboot flash system system.img
Now your system shoud run again.
Alternatively you can download mi fash tool and flash your fastboot rom with flashtool - in the flashtool you can select the folder of your extracted fastboot rom and if your phone is in fastboot mode you can press "flash"
Important on the lower right corner you can select "clean all" ths will erase data, "save userdata" this will keep your data and "clean all and lock" this will erase data and relock your bootloader - last choice I wouldn´t recommend...

Voodoojonny said:
So the easy way should be repairing your file-system of your system partition and reflashing your system partition.
1. go to twrp and select wipe -> advanced wipe -> select "system" and press the button "change or repair filesystem" -> "repair filesystem"
2. flash your system partition: download the fastboot rom you used before your system got broken from here
3. Extract rom and copy system.img to your fastboot folder
4. If you use windows 10: shift+right click somewhere in the white area of your fastboot folder "open power shell window here" - on windws 7 it will be open command prompt here...
5. flash system (windows 10 - for windows 7 copy code without ./)
Code:
./fastboot flash system system.img
Now your system shoud run again.
Alternatively you can download mi fash tool and flash your fastboot rom with flashtool - in the flashtool you can select the folder of your extracted fastboot rom and if your phone is in fastboot mode you can press "flash"
Important on the lower right corner you can select "clean all" ths will erase data, "save userdata" this will keep your data and "clean all and lock" this will erase data and relock your bootloader - last choice I wouldn´t recommend...
Click to expand...
Click to collapse
First of all, thanks for taking the time.
so i had 9.6.4 stock oreo on the phone. then i updated. i have the folder for it. but even when i tried to flash "system.img" but there is some kind of error.
i have access to a windows 7 pc at work, so i could probably try it all again tomorrow, using ur steps here.
whatever happens i will update here. thanks again

Voodoojonny said:
So the easy way should be repairing your file-system of your system partition and reflashing your system partition.
1. go to twrp and select wipe -> advanced wipe -> select "system" and press the button "change or repair filesystem" -> "repair filesystem"...
Click to expand...
Click to collapse
one more thing, miflash gives error "cant find script" when i select "clean all" or "clean all and lock". so i think my only option will be to try adb or maybe you have the proper .bat file you could attach for me.
.bat files i have are in the "daisy_V9.6.11.0.ODLMIFF_8.1" folder i extracted

agbadino said:
one more thing, miflash gives error "cant find script" when i select "clean all" or "clean all and lock". so i think my only option will be to try adb or maybe you have the proper .bat file you could attach for me.
.bat files i have are in the "daisy_V9.6.11.0.ODLMIFF_8.1" folder i extracted
Click to expand...
Click to collapse
Download rom and right click "extract here" a folder will be created and this folder you need to select in miflash. In the folder you should see the .bat files and a folder "images"
---------- Post added at 04:38 PM ---------- Previous post was at 04:36 PM ----------
agbadino said:
First of all, thanks for taking the time.
so i had 9.6.4 stock oreo on the phone. then i updated. i have the folder for it. but even when i tried to flash "system.img" but there is some kind of error.
i have access to a windows 7 pc at work, so i could probably try it all again tomorrow, using ur steps here.
whatever happens i will update here. thanks again
Click to expand...
Click to collapse
You have to copy system.img to fastboot folder and right click somewhere to select "open command prompt here"
Then type
Code:
fastboot flash system system.img
Your phone has to be in fastboot mode...

i did exactly as you directed. but still nothing. i have attached the result of the cmd executions so far.

Voodoojonny said:
Download rom and right click "extract here" a folder will be created and this folder you need to select in miflash. In the folder you should see the .bat files and a folder "images"
---------- Post added at 04:38 PM ---------- Previous post was at 04:36 PM ----------
You have to copy system.img to fastboot folder and right click somewhere to select "open command prompt here"
Then type
Code:
fastboot flash system system.img
Your phone has to be in fastboot mode...
Click to expand...
Click to collapse
i did exactly as you directed. but still nothing. i have attached the result of the cmd executions so far.
TWRP shows my current slot as B. i just took note of that. probably why all flash cmds arent working. Any ideas?

agbadino said:
i did exactly as you directed. but still nothing. i have attached the result of the cmd executions so far.
TWRP shows my current slot as B. i just took note of that. probably why all flash cmds arent working. Any ideas?
Click to expand...
Click to collapse
Ah, I see, yes, you did everything right. It's still a problem with your system partition...
Have you tried formatting your system partition via twrp? And have you done the repair of the partition, I suggested above?

If you can enter fastboot mode, that's good enough
In the fastboot mode, send this command 'fastboot oem edl' to enter the emergency download mode.
Then flash any of the firmware ROM in that mode.
The phone will automatically reboot when done.

Voodoojonny said:
Ah, I see, yes, you did everything right. It's still a problem with your system partition...
Have you tried formatting your system partition via twrp? And have you done the repair of the partition, I suggested above?
Click to expand...
Click to collapse
Yes i did. thats on Slot A after i noticed which slot was active. so basically:
1. i switched to Slot A.
2. changed the file format type. den repaired and formatted it back to ext4.
3. as an after thought after trying adb and faile, i tried Miflash again.
4. dont kno how long it takes to flash. it started, wch was a surprise but its been on for...let me check...2530secs
how long is it expected to tAKE. its 5.46pm now and i have to shutdown soon

ashimiyy said:
If you can enter fastboot mode, that's good enough
In the fastboot mode, send this command 'fastboot oem edl' to enter the emergency download mode.
Then flash any of the firmware ROM in that mode.
The phone will automatically reboot when done.
Click to expand...
Click to collapse
i have tried entering edl mode before. but as i dont kno wat commands to use while in dat mode, i just reboot to recovery or fastboot.
so please help with the possible sequence of commands to use to flash rom once in "EDL mode"

agbadino said:
i have tried entering edl mode before. but as i dont kno wat commands to use while in dat mode, i just reboot to recovery or fastboot.
so please help with the possible sequence of commands to use to flash rom once in "EDL mode"
Click to expand...
Click to collapse
Okay, while in that mode
Connect your phone to laptop
Open miflash tool, your phone should appear as COM32 or so
Then flash in this mode selecting clean all.
You should be fine.

agbadino said:
i have tried entering edl mode before. but as i dont kno wat commands to use while in dat mode, i just reboot to recovery or fastboot.
so please help with the possible sequence of commands to use to flash rom once in "EDL mode"
Click to expand...
Click to collapse
The command is
Code:
fastboot oem edl

Voodoojonny said:
The command is
Code:
fastboot oem edl
Click to expand...
Click to collapse
Goodmorning. so i entered edl mode and den tried Miflash. it starts the process and stops with an error of cant find "keymaster.img"
on second try it says "looking for hello packet" and ends with "cant find hello packet"

agbadino said:
Goodmorning. so i entered edl mode and den tried Miflash. it starts the process and stops with an error of cant find "keymaster.img"
on second try it says "looking for hello packet" and ends with "cant find hello packet"
Click to expand...
Click to collapse
1. Exit edl by pressing pwr for more than 10 sec.
2. Make sure keymaster.img is in the folder "images" of your extracted fastboot image.
3. Go back to fastboot and enter
Code:
fastboot oem edl
The extracted folder with the images should look like image 1
4. Open MiFlash and select the folder daisy global image v9.x.x.x....
5. Now flash...

Voodoojonny said:
1. Exit edl by pressing pwr for more than 10 sec.
2. Make sure keymaster.img is in the folder "images" of your extracted fastboot image.
3. Go back to fastboot and enter
Code:
fastboot oem edl
The extracted folder with the images should look like image 1
4. Open MiFlash and select the folder daisy global image v9.x.x.x....
5. Now flash...
Click to expand...
Click to collapse
i see that urs is slightly different than mine. so i will ask u some favors.
1. please send me a link to download urz. bcos urz seems to be more complete n possibly more reliable.
2. help me confirm in twrp what is the default file system for slot A and slot B. so i can be sure what file system i set mine to.
thanks.

agbadino said:
i see that urs is slightly different than mine. so i will ask u some favors.
1. please send me a link to download urz. bcos urz seems to be more complete n possibly more reliable.
2. help me confirm in twrp what is the default file system for slot A and slot B. so i can be sure what file system i set mine to.
thanks.
Click to expand...
Click to collapse
If you like pie, that´s the last one: http://bigota.d.miui.com/V10.0.3.0.P...e8d8d4a6d0.tgz
And the last oreo build: http://bigota.d.miui.com/V9.6.11.0.O...8028e3bf1c.tgz
Install winrar - if you don´t have and right click on the downloaded file: "extract here"
Now you should have the same file struckture as shown on image 1... Good luck!

Voodoojonny said:
If you like pie, that´s the last one: http://bigota.d.miui.com/V10.0.3.0.P...e8d8d4a6d0.tgz
And the last oreo build: http://bigota.d.miui.com/V9.6.11.0.O...8028e3bf1c.tgz
Install winrar - if you don´t have and right click on the downloaded file: "extract here"
Now you should have the same file struckture as shown on image 1... Good luck!
Click to expand...
Click to collapse
so far so good. but can you help me check ur TWRP on ur A2 lite and confirm wat the standard "default" file system is. d options there are "ext2, ext3, ext4, fat, exfat" the current file system is displayed at d top.
so help me check wats displayed at d top of urz. thanks

asus 5z stucked in fastboot loop

i tried to install twrp in asus 5z through commands then i flashed the wrong active slot or may be both.
now my mobile is stuck at fastboot , i tried many tools and commands, it is getting out i means turns off and turns on the screen then the next second itself it shows fastboot
nothing is working i tried power botton and vol+ and vol- plus power and all the combinations mobile turning off and turning on into fastboot dirctly
what should i do ?????

dharmateja439 said:
i tried to install twrp in asus 5z through commands then i flashed the wrong active slot or may be both.
now my mobile is stuck at fastboot , i tried many tools and commands, it is getting out i means turns off and turns on the screen then the next second itself it shows fastboot
nothing is working i tried power botton and vol+ and vol- plus power and all the combinations mobile turning off and turning on into fastboot dirctly
what should i do ?????
Click to expand...
Click to collapse
1. Flash original boot.img, or
2. flash full original ROM, or
3. factory reset.

dharmateja439 said:
i tried to install twrp in asus 5z through commands then i flashed the wrong active slot or may be both.
now my mobile is stuck at fastboot , i tried many tools and commands, it is getting out i means turns off and turns on the screen then the next second itself it shows fastboot
nothing is working i tried power botton and vol+ and vol- plus power and all the combinations mobile turning off and turning on into fastboot dirctly
what should i do ?????
Click to expand...
Click to collapse
1. Flash the boot.img
2. Or flash FB ROM from here:
https://dlcdnets.asus.com/pub/ASUS/...KL-90.11.162.58-MR5-user_20190424-release.zip

i tried to flash this by command fastboot flash boot filename.zip
but it saysinvalid sparse file format at header magic
and some more errors says mmultiple blocks
and failed remote flashing partition

dharmateja439 said:
i tried to flash this by command fastboot flash boot filename.zip
but it saysinvalid sparse file format at header magic
and some more errors says mmultiple blocks
and failed remote flashing partition
Click to expand...
Click to collapse
You cannot flash .zip file. Command shoulf be:
fastboot flash boot boot.img (in case the boot.img file is located in the same folder as fastboot.exe).
Do not forget to flash it to the right slot A/B, where your system is currently located.

dharmateja439 said:
i tried to flash this by command fastboot flash boot filename.zip
but it saysinvalid sparse file format at header magic
and some more errors says mmultiple blocks
and failed remote flashing partition
Click to expand...
Click to collapse
You don't have to flash it like that.
1. Extract the zip.
2. Open the extracted folder.
3. Put your phone in bootloader (fastboot mode).
4. Double click on 'flash_ALL.bat' file.
Flashing will start.
---------- Post added at 08:51 PM ---------- Previous post was at 08:51 PM ----------
pvscz said:
You cannot flash .zip file. Command shoulf be:
fastboot flash boot boot.img (in case the boot.img file is located in the same folder as fastboot.exe).
Do not forget to flash it to the right slot A/B, where your system is currently located.
Click to expand...
Click to collapse
No. It's an FB ROM, you don't have to select any partition. It will do everything on its own.

Ok, I thought you are flashing only boot... Anyway, hamzain just replied you correctly.

hamzain said:
You don't have to flash it like that.
1. Extract the zip.
2. Open the extracted folder.
3. Put your phone in bootloader (fastboot mode).
4. Double click on 'flash_ALL.bat' file.
Flashing will start.
thank you so much hamzain
you are awsme
i have been searcing for solution since 2 days ur trick worked
my mobie is alive
thanks again
Click to expand...
Click to collapse

dharmateja439 said:
hamzain said:
You don't have to flash it like that.
1. Extract the zip.
2. Open the extracted folder.
3. Put your phone in bootloader (fastboot mode).
4. Double click on 'flash_ALL.bat' file.
Flashing will start.
thank you so much hamzain
you are awsme
i have been searcing for solution since 2 days ur trick worked
my mobie is alive
thanks again
Click to expand...
Click to collapse
Nice. Don't just say thanks, click thanks
Click to expand...
Click to collapse

wth is wrong with me/asus/xda
why in the world am running CSC ROM, should i stop looking for answer and better move on to my old life?

I'm Stuck in fast boot loop while installing TWRP . your kind help will highly appreciate.

977Hemant said:
I'm Stuck in fast boot loop while installing TWRP . your kind help will highly appreciate.
Click to expand...
Click to collapse
Furthermore, my device is not connecting to PC as well.. Please don't let me sink .
#HELP#HELP

I fix your phone in 1 day