I own a ZUk Z2 plus running on android 7 and suddenly it started to behave weird and auto restart on Zuk logo..Sometimes it comes on to pattern screen(Phone turns on and stays on pattern screen) and When I try to give the pattern and login it automatically shuts down or the booting screen comes up..with lot of effort I managed to go to settings and reset the phone..Since then it is only showing Zuk logo and turning off..
battery is fully charged and no issues with the battery.
I need some help in installing a custom rom and the possible ways to get it back to life.....I have intermediate knowledge of doing these things and with someone's help here I hope I can see it alive ...
Thanks in advance
Firstly, maybe it's just a hardware issue?
To my best knowledge, you may use "deep flash cable" or the test points to enter Qualcomm EDL (9008) mode, in that mode you can flash stock ROM with QPST/QFIL, or use the partition manager of QFIL to install TWRP to the recovery partition. After installing TWRP, any custom ROM should be available.
(Without unlocking the bootloader, TWRP etc was not supposed to boot - however Z2 won't refuse to boot a custom image like TWRP, only a warning screen will be shown on Z2)
In TWRP you may also check EMMC status: https://forum.xda-developers.com/lenovo-zuk-z2/help/z2-mlc-tlc-flash-to-estimate-lifetime-t4133705
Related
I first unlocked the bootloader and then flashed the TWRP image, later I flashed AEX 4.6 ROM and then I thought or reclocking the bootloader but when I did it's not booting up. The ZUK Logo appears for a second and screen goes black, the led remains lit and holding the power button for 10 seconds doesn't turn of the device , it restarts again and same thing happens.
Im not able to even access EDL(Emergency Download Mode) to use QPST or MiFlash tool.
Help me guys...
You should really learn to use "FORUM SEARCH". This kind of issue has been resolved and there are few guides available too.
LG G3 D855
aoscp 5.1 Funnelcake
3GB/32GB
Android 8.1
No Root
No Custom Kernel
I had TWRP installed for about 2 years
But now when I try to enter it then it says "Boot Verification Failed" and then Blue and Red light flashes constantly until I pull out the battery. I even flashed MR_Bump on every ROM Flash.
Fact is,
The system boots up fine.
In rare cases the system boots up till the Launcher's home screen and then automatically reboots into download mode, but it can be easily fixed by a battery pullout.
My real problem is how to install TWRP once again because I want to install a new ROM because this one's malfunctioning.
Any help would be appreciated
Hi
I begun experiencing some random freezings at homescreen. When that happenned I rebooted and resumed working. I thought it was some app or OS problem and ignored that.
Until phone didn't boot anymore and now I'm stuck at boot screen. It does not pass through it
I cannot do anything at recovery. I can see the menu, but when I release any of the keys I used to access recovery, everything dissapear and turns off.
Is there any way to debug which could be the problem? Or any tools I could use to repair it
PS: I did not try to unlock bootloader, flash any other recovery, kernel, rom, etc. Its stock as I took it off its package since bought it.
Thanks a lot for any tip you could give me :good:
So I recently changed my Xiaomi Mi MIx 2 screen (the one before was broken) and I wss using LineageOS 16 with TWRP.
The problem is that, after I changed the screen, I could not boot back to LineageOS because I was stuck in a grey screen (after booting the phone I am able to see the Mi logo and the LineageOS loading animation, but after that nothing).
I tried to do a Wipe from the TWRP, but whenever I try to open the recovery I get stuck again with a grey logo... (and in the recovery it does not even shows the TWRP logo, just straight the grey screen). I am still able, however, to go in Fastboot mode and I do have an unlocked bootloader
So my question was... does anyone encounteredd the same problem? And does anyone know how to fix it?
Can I perhaps just use the Mi Flash tool from fastboot to go back to stock MIUI without first wiping from TWRP things like Dalvik cache, cache, System ecc... or would this method fail/brick my phone?
Thank you a lot to anyone that would spend time to help me (and sorry for my bad English, I am trying to improve it).
Have a nice day!
The mi mix2s rewrites a new recovery after every boot, so to get TWRP to work you have to flash it from fastboot every single time. So the next time you boot, reflash TWRP, then you can boot into recovery 1 time and flash the rom of your choice
Hi Guys,
Recently i'm changed my broken display of Mix 2 after that when i'm entering to recovery it showing a gray screen also the phone is detecting on PC.
some TWRP worked but after flashing custom ROM same as showing gray screen after finished boot also doing second try the touch not working on TWRP.
Now i'm using Global version of MIUI11, when flashing custom TWRP via FASTBOOT MODE its booting up but after that restarting the phone revert back to the stock Recovery. Earlier i'm used the final version of MIUI12 Weekly EU ROM
Guys if you know any workaround for this please help me to get rid out of this
Thanks in Advance
Hi,
Recently my devices start to boot loop suddenly so, i decide to flash the custom rom back.after flashing the custom rom,the device still boot loop then i try to get into TWRP Recovery mode but it would not appear, then i proceed to flash the TWRP Image recovery (suspecting the recovery already missing during the flashing rom ) via FASTBOOT once the process done, i had disconnect the cable and suddenly the device screen wouldnt turn on even though i pressed the power button for a long time.
Please help.
Thanks.
asen[email protected] said:
Hi,
Recently my devices start to boot loop suddenly so, i decide to flash the custom rom back.after flashing the custom rom,the device still boot loop then i try to get into TWRP Recovery mode but it would not appear, then i proceed to flash the TWRP Image recovery (suspecting the recovery already missing during the flashing rom ) via FASTBOOT once the process done, i had disconnect the cable and suddenly the device screen wouldnt turn on even though i pressed the power button for a long time.
Please help.
Thanks.
Click to expand...
Click to collapse
Connect phone with PC and check if you Notification light turn on or not.
If it's still on, your phone got hard bricked (maybe because you mess with custom roms and TWRP). Next time follow Flash guide in each custom roms.
You can use unbrick hardbrick method (free) or get service (paid). I recommend try free method first but when use SP Flash tool, remember ONLY use "Download Only" (Some stupid local shop can use Format and you can lose IMEI too, so careful).
You can find that method easily on: Youtube, XDA, Github, Telegram,...
If you have any error, you can reply here or join Telegram group to get help.
hi i already using SP Flash tool but i stuck at this level..