Related
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
I had trouble with OB10 and adb. Said it couldn't read the file. I instead flashed TWRP and enabled mtp from there. I then pushed the full ROM to internal storage. Fastboot flashed the stock recovery and used 'upgrade from internal'. That flashed it fine. Then I reinstalled TWRP and SuperSU.
yasinmys said:
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
Click to expand...
Click to collapse
Have you downloaded the full ROM? Make sure you download the full rom from oneplus's website or any of the mirrors available on various forums on xda. Flash it normally like you flash a custom rom. It will work as I have done it a lot of times. Your file must have been corrupt.
yasinmys said:
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
Click to expand...
Click to collapse
Go to: h*t*t*p*://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.8/ (REMOVE STARS) download both stock recovery and rom of OOS v3.2.8 (located at the bottom of the page). Flash stock recovery via fastboot (I hope you know how to). After it was flashed, disconnect the cable, turn off the device in fastboot (power off). Then hold power and volume down keys down to boot into recovery. From there ADB sideload the stock OOS v3.2.8. Let it boot up and update to OOS 4.0 via OTA.
P.s. If you need the actual steps, let me know. I'll update it in this post.
nine5raptor said:
I had trouble with OB10 and adb. Said it couldn't read the file. I instead flashed TWRP and enabled mtp from there. I then pushed the full ROM to internal storage. Fastboot flashed the stock recovery and used 'upgrade from internal'. That flashed it fine. Then I reinstalled TWRP and SuperSU.
Click to expand...
Click to collapse
I had an issue with custom twrp + Freedom OS v2.0 (OOS v4.0). No xposed, a lot of battery issues with performance and toggling settings issues too. So I decided to stick with Freedom OS 1.7 (OOS v3.2.8) until OnePlus fixes the issues, with xposed available for Nougat and official twrp being released to support Nougat. Also, whenever I flashed custom twrp, which was recommended by the dev, it always asked me for a password. I did have PIN code with fingerprint option, a pattern option or none at all. All of which did not help bypass it, even using "default_password". I was stuck with OOS v4.0, somehow, with no twrp to work with as it locked my data. I backed my files before flashing from OOS v3.2.8 to OOS v4.0, lucky me. I managed to do what I have explained in the first response.
Not tested on nougat.
I use adb and fastboot , twrp, supersu.
Files We need:
TWRP: It's bogus, in my phone the screen flips upsidedown: Connect a mouse thru female usb or try to figure out how to tap in a rotated screen with a non rotated touch panel.
TWRP Download -> https://drive.google.com/file/d/0B0XMYw0cbs_cdm5FZW1DQXl4MFU/view
SuperSU file - > https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
For ADB access thru MAC:
1.- First of all we have to get open USB debug mode to get adb acces to the phone by going to Settings -> About -> Software Information -> Tap 7 times over Build number.
2.- After we get Developer options available we have to put the phone on usb debugging by goig to "Settings-> Developer Options" Activate USB Debugging.
3.- Install android platform-tools on your PC/Linux/MAC , in my case had work on MAC and no devices acces thru ADB on PC :silly: .
platform-tools -> http://www.androidpolice.com/2017/0...ble-without-full-sdk-android-studio-download/
Here you have the 3 options to download ADB and FASTBOOT
4.- Connect your phone to the PC (USB) and copy SuperSu to the root of your phone, a place that its easy too acces, cause TWRP, for the moment flips the screen.
5.- Copy TWRP3.0.XXX.zip to the folder where you have platform-tools installed.
6.- Reboot your phone to bootloader and in Linux could work too:
./adb reboot bootloader [./ is placed cause I don't put platform-tools on the my PATH]
After the boot, then we have to boot on TWRP
./fastboot boot twrp-3.0xxxx.zip (you don't flash anything) If you want to flash TWRP, at your awn risk, ./fastboot flash recovery twrp-3.0xxxx.zip".
Well, now you have to see TRWP on your phone screen.
My recomendation is to play a little bit with the flipped screen if you don't have a female USB to plug a mouse.
7.- Trying to make a complete backup of the phone could be a good practice to move on TWRP with the flipped screen . Tap backup option and make a Backup. Always recomended!
8.- After Backup, you can go to INSTALL SuperSU.zip file. "Install -> look for your SuperSU.zip file "
9.- Go to Playstore and install supersu app.
Now you can test your root, after reboot for example tryin to install some APP that requires root. Fast move:
./adb shell
su root
It has to appear a screen to grant root access to the phone.
10. Done!
Well I think thats my second post at all, hope can help someone to root the phone.
I placed In Questions and Answers cause XDA says want to protect us from SPAM.
Feel free to correct me anything.
Kronen_75
Your links do not work.
jnmacd said:
Your links do not work.
Click to expand...
Click to collapse
Links are corrected. Thanks!
You can also substitute Magisk instead of Supersu if you need to use any of the pay apps or have root sensitive apps...
Without the right Twrp, many benefits to rooting are missing such as removing stock rom applications. Seems without being able to boot to a recovery, even Titanium cannot remove apps because it needs to clean the dalvic.. Can't do it without a recovery
Sent from my ASUS_Z016D using XDA-Developers Legacy app
Download the right twrp here: https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
You should change your title !!
Tested on nougat.
The variant ZS550KL can be rooted with same method on latest firmware with nougat
Very nice guide, Thank you. Could you please provide updated links to both TWRP and SuperSU. I am currently using TWRP 3.1.1-0 and it functions properly after hanging for approximately 45 seconds on boot. This may be due to the fact my phone is encrypted. I initially rooted without installing TWRP (fastboot boot twrp.img) but have since flashed it. Both ways work well. The posted version of SuperSU did result in root but caused me to lose cell service! The phone could "see" the sim card but not use it. Updating to SuperSU 2.82 solved that issue. This was all done on my finally rooted ZenFone 3 Deluxe Special Edition (Z016D)!!!
I unfortunately figured something out the other day. Using TWRP 3.1.1-0 I am able to install zip files, complete wipes, make & restore backups. The issues only arise after you restore your nandroid image. Everything works except for two things.
1. The ability to hear audio during phone calls. The phone is actually able to place calls but you are unable to hear or record any phone audio. Oddly enough I was able to play music and use voice dictation. It was only in-call audio that seemed to be affected.
2. If you have a pin set when you create your nandroid image your pin will no longer work once restored. You will be locked out of your own phone!!
Fortunately both are fairly easily resolved and keep TWRP relatively useful, although a bit bothersome!
To resolve the pin issue it is necessary to use the TWRP file manager or ADB to delete 5 files (listed below) and regain entrance to your phone. Once deleted simply reboot the phone and reset your pin. If you remove your pin before creating a backup this issue is averted completely.
/data/system/gatekeeper.pattern.key
/data/system/gatekeeper.password.key
/data/system/locksettings.db
/data/system/locksettings.db-wal
/data/system/locksettings.db-shm
To re-enable call audio use TWRP (install zip) to reflash the same version firmware from the Asus website over your current install without wiping. This will restore any system apps you may have removed but you should still have root and can easily remove them again. There will be two errors when performing the flash, which is why I believe root is retained but the system image will be reflashed. Reboot and enjoy
I sincerely hope I have not caused anyone any issues! Or that someone else finds this information useful. I have tested everything in this post at least three times. All testing was done on the most recent Android 7 firmware on my ZenFone 3 Deluxe Special Edition (SnapDragon 821/6/256).
Sandman45654 said:
I unfortunately figured something out the other day. Using TWRP 3.1.1-0 I am able to install zip files, complete wipes, make & restore backups. The issues only arise after you restore your nandroid image. Everything works except for two things.
1. The ability to hear audio during phone calls. The phone is actually able to place calls but you are unable to hear or record any phone audio. Oddly enough I was able to play music and use voice dictation. It was only in-call audio that seemed to be affected.
2. If you have a pin set when you create your nandroid image your pin will no longer work once restored. You will be locked out of your own phone!!
Fortunately both are fairly easily resolved and keep TWRP relatively useful, although a bit bothersome!
To resolve the pin issue it is necessary to use the TWRP file manager or ADB to delete 5 files (listed below) and regain entrance to your phone. Once deleted simply reboot the phone and reset your pin. If you remove your pin before creating a backup this issue is averted completely.
/data/system/gatekeeper.pattern.key
/data/system/gatekeeper.password.key
/data/system/locksettings.db
/data/system/locksettings.db-wal
/data/system/locksettings.db-shm
To re-enable call audio use TWRP (install zip) to reflash the same version firmware from the Asus website over your current install without wiping. This will restore any system apps you may have removed but you should still have root and can easily remove them again. There will be two errors when performing the flash, which is why I believe root is retained but the system image will be reflashed. Reboot and enjoy
I sincerely hope I have not caused anyone any issues! Or that someone else finds this information useful. I have tested everything in this post at least three times. All testing was done on the most recent Android 7 firmware on my ZenFone 3 Deluxe Special Edition (SnapDragon 821/6/256).
Click to expand...
Click to collapse
The second issue happens in all the phones/twrp.
It's possible to install the firmware from asus website with twrp?? To update i flash the stock recovery, install the firmware, then reflash twrp and supersu. Didn't know that! It updates successfully with twrp??
Thank you Ryder for confirming my suspicion that the pin issue may have been a more common one with TWRP. This is the first phone I actually cared enough about to use a pin. I was thrown for a loop when I first booted my fresh nandroid restore and the pin I know I've been using was incorrect!
As for installing firmware, with the two errors that occurred during I don't know that you would be able to do full scale upgrade to a higher version. To reinstall the system partition however it does seem to work quite well. I tested this part four times. To do so download the correct device/version firmware to the phones storage, click install, and select that file. After it completes I like to wipe both the cache and the dalvik cache before restarting the phone. The audio issue was unfortunately easily reproduced on my phone, but thankfully equally easy to resolve. This worked for me each time without fail.
Sandman45654 said:
Thank you Ryder for confirming my suspicion that the pin issue may have been a more common one with TWRP. This is the first phone I actually cared enough about to use a pin. I was thrown for a loop when I first booted my fresh nandroid restore and the pin I know I've been using was incorrect!
As for installing firmware, with the two errors that occurred during I don't know that you would be able to do full scale upgrade to a higher version. To reinstall the system partition however it does seem to work quite well. I tested this part four times. To do so download the correct device/version firmware to the phones storage, click install, and select that file. After it completes I like to wipe both the cache and the dalvik cache before restarting the phone. The audio issue was unfortunately easily reproduced on my phone, but thankfully equally easy to resolve. This worked for me each time without fail.
Click to expand...
Click to collapse
You said that the two issues occurred when you restored the nandroid backup and to fix one of them by installing the zip firmware from asus website with twrp... I don't understand. I can install zip firmware with twrp or i have to flash the stock recovery and install with it? Errors may occur using the twrp? Sorry
Everything done in my post so far has been in TWRP. Honestly I didn't even back up the recovery image. TWRP seemed to work flawlessly so I bit bullet and flashed it.
On a sidenote I am currently testing the usability of FlahFire on this device. It appears to create a very nice fastboot installable recovery image! I have yet to restore the image however. I will post my findings here once I have thoroughly tested it.
Sandman45654 said:
Everything done in my post so far has been in TWRP. Honestly I didn't even back up the recovery image. TWRP seemed to work flawlessly so I bit bullet and flashed it.
On a sidenote I am currently testing the usability of FlahFire on this device. It appears to create a very nice fastboot installable recovery image! I have yet to restore the image however. I will post my findings here once I have thoroughly tested it.
Click to expand...
Click to collapse
Ok. I'm interested in flashing zip firmware to update. Never tried that. I thought that firmware can be installed only with stock recovery. The stock recovery can be downloaded in an asus forum website
This is the first time I have flashed anything in almost a year. I got to thinking and this is the most success I have had was flashing a stock image with TWRP! I doubt it will perform a full flash. I believe the errors are most likely for the boot and recovery partitions. As a save my butt reflash the system partition it does work. It sounds like it's time to find some TWRP changelogs!
Sandman45654 said:
This is the first time I have flashed anything in almost a year. I got to thinking and this is the most success I have had was flashing a stock image with TWRP! I doubt it will perform a full flash. I believe the errors are most likely for the boot and recovery partitions. As a save my butt reflash the system partition it does work. It sounds like it's time to find some TWRP changelogs!
Click to expand...
Click to collapse
I don't care about stock images... If i can't flash the zip with twrp to update successfully then i reflash the stock recovery and after the update root again with twrp and supersu. By the way, the zip firmare contains factory images? I thought it contains different kind of files
Ryder. said:
By the way, the zip firmare contains factory images? I thought it contains different kind of files
Click to expand...
Click to collapse
I lack the knowledge to answer that with enough certainty to even call it an answer! This is my foray into the insides of this phone and I don't want to start posting my hunches.
What I do know is you can flash the system partition using TWRP. I have done it several times. Asus's zips run as a script based zip install. You are offered no options during install. When the script runs you will see two errors quickly scroll past.
Ryder. said:
Download the right twrp here: https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Click to expand...
Click to collapse
Are you creating these TWRP builds? If so thank you very much! TWRP-3.1.1-0-Z016-20170826 seems to work flawlessly! No lag on boot and no known issues after restoring a backup unlike before.
I wanted to post my finding about FlashFire by Chainfire. I have had great success with the fastboot backup! It is the only option I have tested extensively however. I have been running the same fastboot restored phone since soon after my last post on this topic with no issues discovered.
Sandman45654 said:
Are you creating these TWRP builds? If so thank you very much! TWRP-3.1.1-0-Z016-20170826 seems to work flawlessly! No lag on boot and no known issues after restoring a backup unlike before.
I wanted to post my finding about FlashFire by Chainfire. I have had great success with the fastboot backup! It is the only option I have tested extensively however. I have been running the same fastboot restored phone since soon after my last post on this topic with no issues discovered.
Click to expand...
Click to collapse
No. It's not me. It's another user which i don't remember the nickname
Ryder. said:
No. It's not me. It's another user which i don't remember the nickname
Click to expand...
Click to collapse
Okay thank you. If you happen to find out/remember please let me know. I would like to give credit with my project and thank them for their hard work.
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
Unbrick guide method 2 should fix it, otherwise ask Oneplus support.
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
Which TWRP are you using? Try using the latest from eng.stk's (Blue Spark).
If you want MM, the more stable and improved version is 3.2.8. What you downloaded is 3.2.4. So, download 3.2.8 and boot into recovery, wipe system, dalvik cache, cache and data including internal storage (you will lose all your files including photos, videos etc). Boot the phone into the bootloader mode and push the ROM to the phone and flash it from recovery or flash the ROM from PC using adb commands. Flash TWRP again and boot into recovery and if ok, boot into system. If everything is ok, you can flash SuperSU/Magisk, if you need root. A couple of wipes of both the caches in between may also be done.
If this doesn't sort out the issue, use Method 2 from the Mega Unbrick Guide in XDA and follow every instruction scrupulously, especially relating to drivers.
If even this fails, it is a hardware issue.
EDIT: I see that Puddi Puddin beat me to it.
Puddi_Puddin said:
Unbrick guide method 2 should fix it, otherwise ask Oneplus support.
Click to expand...
Click to collapse
tnsmani said:
If this doesn't sort out the issue, use Method 2 from the Mega Unbrick Guide in XDA and follow every instruction scrupulously, especially relating to drivers.
If even this fails, it is a hardware issue.
Click to expand...
Click to collapse
Step 8 doesn't work for me...
I guess the phone goes back to the repair company then
tnsmani said:
Which TWRP are you using? Try using the latest from eng.stk's (Blue Spark).
If you want MM, the more stable and improved version is 3.2.8. What you downloaded is 3.2.4. So, download 3.2.8 and boot into recovery, wipe system, dalvik cache, cache and data including internal storage (you will lose all your files including photos, videos etc). Boot the phone into the bootloader mode and push the ROM to the phone and flash it from recovery or flash the ROM from PC using adb commands. Flash TWRP again and boot into recovery and if ok, boot into system. If everything is ok, you can flash SuperSU/Magisk, if you need root. A couple of wipes of both the caches in between may also be done.
Click to expand...
Click to collapse
I am using the newest (twrp-3.1.1-2-oneplus3.img) but the problem is that I can't see anything in recovery or elsewhere :/
Peybro said:
Step 8 doesn't work for me...
I guess the phone goes back to the repair company then
Click to expand...
Click to collapse
Well you have really messed up something it seems.. This shouldnt be happening by rooting and stuff, I think it is pure coincidence
Peybro said:
Hey guys,
I think I'm a little bit in trouble: I just got a OP3 and wanted to root it as I'm used to it from the OPO.
But there were problems because of Force Encyption... After a few trys and flashs, I flashed Stock OOS (
OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
) from TWRP and after rebooting...
THE SCREEN IS YELLOW AND FULL OF PIXELS (like an olt TV).
You can feel it works from vibrations but you can't see what's going on... I tried this for unbricking but no success.
I think my phone's display drivers might be broken but idk.
Does anyone maybe know what to do here?
Click to expand...
Click to collapse
What exactly did you flash other than OOS and recovery? Why did you need a few flashes? You flashed SuperSU or Magisk? Root still works on an encrypted system so not understanding some things from your post
Puddi_Puddin said:
Well you have really messed up something it seems.. This shouldnt be happening by rooting and stuff, I think it is pure coincidence
Click to expand...
Click to collapse
I hope so - maybe the repair company messed the screen connection up and they fix it for free... :angel:
Renosh said:
What exactly did you flash other than OOS and recovery? Why did you need a few flashes? You flashed SuperSU or Magisk? Root still works on an encrypted system so not understanding some things from your post
Click to expand...
Click to collapse
First I flashed newest TWRP and Paranoid Android but it wasn't as good as expected and so I flashed back to OOS (_008 I think) and everything worked but when I wanted to flash Magisk (because SafetyNet) via TWRP I couldn't because the phone wanted a pattern to unlock encryption.
I read that it would be the same as I used to unlock my phone (btw the only 1 I use) but it didn't work...
Before I found a guide with the right order to remove the encryption I tried different ways by myself (that's because I flashed a few times) (Toolkit, "Fastboot format userdata", TWRP format) but nothing removed it.
Then I wanted to follow that guide but meanwhile there was no OS at all and img Install via fastboot didn't work but I managed to get the newest stable OOS (_16 I think) on the phone, installed it with TWRP aaaaaand...
YELLOW-ORANGEish PIXEL SCREEN
fastboot and everything works - I just can't see what's going on
Peybro said:
I hope so - maybe the repair company messed the screen connection up and they fix it for free... :angel:
First I flashed newest TWRP and Paranoid Android but it wasn't as good as expected and so I flashed back to OOS (_008 I think) and everything worked but when I wanted to flash Magisk (because SafetyNet) via TWRP I couldn't because the phone wanted a pattern to unlock encryption.
I read that it would be the same as I used to unlock my phone (btw the only 1 I use) but it didn't work...
Before I found a guide with the right order to remove the encryption I tried different ways by myself (that's because I flashed a few times) (Toolkit, "Fastboot format userdata", TWRP format) but nothing removed it.
Then I wanted to follow that guide but meanwhile there was no OS at all and img Install via fastboot didn't work but I managed to get the newest stable OOS (_16 I think) on the phone, installed it with TWRP aaaaaand...
YELLOW-ORANGEish PIXEL SCREEN
fastboot and everything works - I just can't see what's going on
Click to expand...
Click to collapse
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
tnsmani said:
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
Click to expand...
Click to collapse
I can give it a try later (and in the future when everything works again) but I do not think (at least I can't imagine) that the problem I have comes from recovery.
I know the reason!
I found other people who also had a static screen and they said they could fix it by pressing the screen back on its contacts...
I did so and it worked!... A bit... For a few minutes...
So the static definitely wasn't the result of rooting and stuff but the repair company's fault.
I hope they accept their mistake and fix it. Thx for everyone here trying to hel me!
P.S.
tnsmani said:
I already asked you to use the TWRP from eng.stk
The official 3.1.1-2 works well with OOS but is cranky with custom ROMS. eng.stk's works both with OOS and custom ROMs.
Click to expand...
Click to collapse
And as soon as I can I will try this TWRP
-------------------------------- Edit: --------------------------------
(Just in case people get same problem)
[after Mega Unbrick Method 2 finally worked (I put the stock zip in the tool's folder)]
This morning I restarted the phone just because and I could see what was going on on the phone - but the display was still crazy with yellow tint and colorful stripes etc.). After setup it asked me to download & install newest stock rom; I did and after reboot everything was fine again....
Don't know what happened here but it seems to work again.
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
Code:
tar -xzf ********.tgz
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
viking777 said:
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
Click to expand...
Click to collapse
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
12:121390 said:
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
Click to expand...
Click to collapse
Anti roll back is disabled and not an issue if bootloader is unlocked
Nice thread. Tried it as well but no chance 10.0.3.00 + twrp + magisk. And you are right the problem is twrp.
Sent from my Phh-Treble vanilla using Tapatalk
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
brother i also want to install RR PIE Rom can you please give me the guide link?
hossman said:
Anti roll back is disabled and not an issue if bootloader is unlocked
Click to expand...
Click to collapse
correct it is not. what happened was.. lol. i thought i was crafty and did some file swapping and made miflash setups that would flash so the stock files as usual , but with gsi's like RR and/or bootleggers for the system image. and it works, up until i flashed from RR to bootleggers with those setups described previously . there is where my genius was flawed. lol. lesson learned
---------- Post added at 06:43 AM ---------- Previous post was at 06:38 AM ----------
marstonpear said:
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
Click to expand...
Click to collapse
for me, i have not come across anything caused by the GSI. any issues I've faced are purely self inflicted.
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Voodoojonny said:
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Click to expand...
Click to collapse
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
viking777 said:
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
Click to expand...
Click to collapse
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Voodoojonny said:
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Click to expand...
Click to collapse
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
viking777 said:
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
Click to expand...
Click to collapse
There seems to be some bugs restoring system and vendor... Some users talked about... I usually only save and restore the data and boot partition and I never had any problems with that. For all other partitions you can use miflash or fastboot...
Yeah all my twrp full backups don't work after a fresh stock installment either, that's very annoying.
The twrp version for daisy is bugged. Backups are not working, the wifi with GSI Roms on pie stock is not working anymore as soon as twrp is installed as well.
Sent from my Phh-Treble vanilla using Tapatalk
Thanks for the replies above. @voodoojohnny
In my case it was the data partition that caused the restore to fail, vendor and system and boot all seemed to go through normally. @cd492
Based on what you say along with my own experiences and those of voovoojohnny, it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
viking777 said:
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
Click to expand...
Click to collapse
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
InfinityXDA said:
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
Click to expand...
Click to collapse
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
Click to expand...
Click to collapse
I meant it, at least for now, but maybe your post will help somebody else.
viking777 said:
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
I meant it, at least for now, but maybe your post will help somebody else.
Click to expand...
Click to collapse
Yes I didn't see that post but understand I didn't give you links to the official TWRP, I gave you the unofficial fixed TWRP which actually features SD Card Support and trust me it works completely fine I haven't had a problem yet. This took me hours upon hours to figure out what I was doing wrong.
The only specific reason you are not successfully getting TWRP is because you didn't flash the aboot.img after installing the zip.
I hope this helps you in the future!
thanks InfinityXDA for the tutorial, you should create a post just for it~
Hello, I own a sm-p605 LTE/WiFi and I had been trying to unlock the bootloader since some time unsuccessfully. I then succeeded eventually and accidentally. After having flashed twrp through Odin many times successfully and using different twrp versions, in the end twrp never showed up. I did a reset to factory defaults within the stock ROM (to address a different issue actually) and that (and only that!) made the twrp show at boot. Else it went straight into stock bootloader. I add that through twrp I was able to install LOS 14.1 2021 + pico open-gapps successfully.
Now, I have two questions:
1. it might sound silly but, can I now assume that my bootloader is unlocked? I'm asking this because my device did not have the OEM Unlock option in the stock rom developer settings, and I have tried all possible advices read on this forum to no avail, to make it appear. I assume that twrp took control over the boot process as it is working fine, but the fact that the OEM Unlock option was never available makes me doubt.
2. I thought that LOS would automatically allow root access, but it does not seem the case. A su checker tells me not. But an app that I have installed (a pdf reader) warns me if I'm ok to install the app in a rooted environment. I guess su checker is the one to trust, right?
That sounds interesting, can you provide me the files you used and the version of Odin. I would like to test this on my p605 to try it out. Sits in a drawer anyway.
mezam said:
Hello, I own a sm-p605 LTE/WiFi and I had been trying to unlock the bootloader since some time unsuccessfully. I then succeeded eventually and accidentally. After having flashed twrp through Odin many times successfully and using different twrp versions, in the end twrp never showed up. I did a reset to factory defaults within the stock ROM (to address a different issue actually) and that (and only that!) made the twrp show at boot. Else it went straight into stock bootloader. I add that through twrp I was able to install LOS 14.1 2021 + pico open-gapps successfully.
Now, I have two questions:
1. it might sound silly but, can I now assume that my bootloader is unlocked? I'm asking this because my device did not have the OEM Unlock option in the stock rom developer settings, and I have tried all possible advices read on this forum to no avail, to make it appear. I assume that twrp took control over the boot process as it is working fine, but the fact that the OEM Unlock option was never available makes me doubt.
2. I thought that LOS would automatically allow root access, but it does not seem the case. A su checker tells me not. But an app that I have installed (a pdf reader) warns me if I'm ok to install the app in a rooted environment. I guess su checker is the one to trust, right?
Click to expand...
Click to collapse
You're TWRP installing problem might have come up when not rebooted DIRECTLY after flashing into recovery.
This failure lets stock recovery get reanimated.
I have P605 too and can asure you that this devices never had an OEM locked bootloader. I've read that Verizon and others in the US locked them, but never did Samsung.
Mine is on LOS 17.1 which is very stable and to gain root you gotta flash Magisk and after rebooting to system set it up.
A simple pdf reader shouldn't imho care about it's envirement. So I wouldn't use it and search for a different one.
I use ebookdroid.
bmwdroid said:
You're TWRP installing problem might have come up when not rebooted DIRECTLY after flashing into recovery.
This failure lets stock recovery get reanimated.
I have P605 too and can asure you that this devices never had an OEM locked bootloader. I've read that Verizon and others in the US locked them, but never did Samsung.
Mine is on LOS 17.1 which is very stable and to gain root you gotta flash Magisk and after rebooting to system set it up.
A simple pdf reader shouldn't imho care about it's envirement. So I wouldn't use it and search for a different one.
I use ebookdroid.
Click to expand...
Click to collapse
I wish I could do the same, sadly I am a Verizon version owner and let me tell you it is terrible in 2022. If I could unlock it I would definitely use it more