Update R8?0XXU1CTJ5 removes BP (?) - Samsung Galaxy Watch

Just got an FOTA update , BP Gone, ECG still there , csc is KOO ...
Had to revert back to R8?0XXU1ASHF to re install BP and ECG then back to R8?0XXU1CTI4 via FOTA.
************ UPDATE ********************
Found a quick solution --- It seems direction of ECG and BP packages is the one with a single TPK / app id packages. Was able to install CTJ5 while preserving BP and ECG. The idea is use ECG+BP tpk installers such those that are going around like 23.tpk or apk4tpk versions in which both ECG+BP are installed as a single package. These versions can be verified as the ones with the one-app Samsung Health Monitor Icon on your watch. with ECG and BP inside.
In short, dont use ecg.tpk or bp.tpk standalone installers as you are bound to lose them on future watch updates
This means, you need to re-install everything again (Via Netodin Firmware downgrade?) and use 23.tpk / apk4tpk with BP+ECG.wgt inside.

Just updated the KOO CSC and BP is still here.
Phone is S20 with ZTO CSC.

https://forum.xda-developers.com/showpost.php?p=83814925&postcount=16
Code:
[COLOR="Red"]diff5[/COLOR]_com_samsung_health_samd_ecg.tpk_CSC.delta
No idea what they changed... maybe new Version and forced to update to remove all:
Code:
com.samsung.health.samd.bp
Best Regards
Edit 1.
Attempt to explain what why happend...
https://forum.xda-developers.com/showpost.php?p=83816129&postcount=3088

Flashed to CTJ5...
Root still work. :angel:
Code:
sdb pull /opt/system/csc/ .\2a\ctj5
pulled com_samsung_health_samd_bp.tpk 100% 3MB
pulled Spotify.tpk 100% 2MB
pulled com_samsung_health_samd_ecg.tpk 100% 1MB
pulled NaverMap.wgt 100% 3MB
pulled TizenFontKaitiChina.wgt 100% 17MB
pulled csc-bin-ver-update.sh 100% 394 B
pulled SW_Configuration.xml 100% 3KB
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 99 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 135 B
pulled applist.ini 100% 196 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 111 B
pulled csc-preset.ini 100% 141 B
pulled csc-preset.ini 100% 141 B
pulled applist.ini 100% 294 B
pulled csc-feature.ini 100% 160 B
pulled csc-preset.ini 100% 99 B
pulled csc-preset.ini 100% 93 B
pulled csc-preset.ini 100% 87 B
pulled applist.ini 100% 172 B
pulled csc-feature.ini 100% 160 B
pulled csc-preset.ini 100% 99 B
pulled applist.ini 100% 319 B
pulled csc-feature.ini 100% 86 B
pulled csc-preset.ini 100% 117 B
pulled csc-preset.ini 100% 141 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled applist.ini 100% 147 B
pulled csc-preset.ini 100% 95 B
pulled applist.ini 100% 147 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 225 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 99 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 231 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 141 B
pulled csc-preset.ini 100% 123 B
pulled csc-preset.ini 100% 117 B
pulled applist.ini 100% 172 B
pulled csc-feature.ini 100% 243 B
pulled csc-preset.ini 100% 87 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 81 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 20 B
pulled csc-preset.ini 100% 141 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 106 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 117 B
pulled applist.ini 100% 320 B
pulled csc-feature.ini 100% 148 B
pulled csc-preset.ini 100% 87 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled applist.ini 100% 147 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 111 B
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 93 B
pulled applist.ini 100% 154 B
pulled csc-feature.ini 100% 226 B
pulled csc-preset.ini 100% 171 B
pulled poweron.edj 100% 956KB
pulled poweroff.edj 100% 696KB
pulled csc-preset.ini 100% 93 B
pulled csc-preset.ini 100% 135 B
pulled applist.ini 100% 154 B
pulled csc-feature.ini 100% 66 B
pulled csc-preset.ini 100% 189 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 225 B
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 53 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 93 B
pulled csc-preset.ini 100% 225 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 141 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled zh_TW.zip 100% 1MB
pulled fi_FI.zip 100% 1MB
pulled ro_RO.zip 100% 481KB
pulled km_KH.zip 100% 531KB
pulled it_IT.zip 100% 589KB
pulled cs_CZ.zip 100% 651KB
pulled kk_KZ.zip 100% 450KB
pulled ka_GE.zip 100% 614KB
pulled zh_HK.zip 100% 1MB
pulled is_IS.zip 100% 389KB
pulled hr_HR.zip 100% 539KB
pulled sq_AL.zip 100% 403KB
pulled es_LA.zip 100% 904KB
pulled ms_MY.zip 100% 374KB
pulled da_DK.zip 100% 690KB
pulled ru_RU.zip 100% 959KB
pulled uk_UA.zip 100% 606KB
pulled ja_JP.zip 100% 2MB
pulled th_TH.zip 100% 497KB
pulled zh_CN.zip 100% 1MB
pulled mn_MN.zip 100% 494KB
pulled nb_NO.zip 100% 705KB
pulled uz_UZ.zip 100% 700KB
pulled vi_VN.zip 100% 285KB
pulled ar_SA.zip 100% 729KB
pulled en_GB.zip 100% 759KB
pulled sl_SI.zip 100% 584KB
pulled ko_KR.zip 100% 1MB
pulled sr_RS.zip 100% 531KB
pulled en_US.zip 100% 774KB
pulled de_DE.zip 100% 1MB
pulled jv_ID.zip 100% 489KB
pulled hu_HU.zip 100% 1MB
pulled az_AZ.zip 100% 652KB
pulled fr_CA.zip 100% 522KB
pulled tg_TJ.zip 100% 571KB
pulled fa_IR.zip 100% 510KB
pulled tk_TM.zip 100% 244KB
pulled lt_LT.zip 100% 688KB
pulled tr_TR.zip 100% 1MB
pulled es_ES.zip 100% 905KB
pulled bg_BG.zip 100% 774KB
pulled lo_LA.zip 100% 316KB
pulled he_IL.zip 100% 540KB
pulled mk_MK.zip 100% 490KB
pulled el_GR.zip 100% 637KB
pulled et_EE.zip 100% 740KB
pulled pt_PT.zip 100% 996KB
pulled sv_SE.zip 100% 674KB
pulled pt_BR.zip 100% 995KB
pulled ky_KG.zip 100% 584KB
pulled nl_NL.zip 100% 736KB
pulled lv_LV.zip 100% 589KB
pulled pl_PL.zip 100% 669KB
pulled su_ID.zip 100% 448KB
pulled ur_PK.zip 100% 352KB
pulled tl_PH.zip 100% 363KB
pulled hy_AM.zip 100% 605KB
pulled sk_SK.zip 100% 613KB
pulled fr_FR.zip 100% 523KB
pulled id_ID.zip 100% 422KB
pulled customer.xml 100% 512 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 581 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 610 B
pulled customer.xml 100% 466 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 609 B
pulled customer.xml 100% 620 B
pulled customer.xml 100% 468 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 606 B
pulled customer.xml 100% 465 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 619 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 470 B
pulled customer.xml 100% 607 B
pulled customer.xml 100% 635 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 619 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 607 B
pulled customer.xml 100% 618 B
pulled customer.xml 100% 613 B
pulled customer.xml 100% 611 B
pulled customer.xml 100% 604 B
pulled customer.xml 100% 468 B
pulled customer.xml 100% 464 B
pulled customer.xml 100% 561 B
pulled customer.xml 100% 585 B
pulled customer.xml 100% 617 B
pulled customer.xml 100% 466 B
pulled customer.xml 100% 616 B
pulled customer.xml 100% 464 B
pulled customer.xml 100% 469 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 605 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 600 B
pulled customer.xml 100% 472 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 616 B
pulled customer.xml 100% 463 B
pulled customer.xml 100% 624 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 605 B
pulled customer.xml 100% 608 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 600 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 606 B
pulled customer.xml 100% 615 B
pulled customer.xml 100% 600 B
pulled customer.xml 100% 609 B
pulled customer.xml 100% 618 B
pulled customer.xml 100% 561 B
pulled customer.xml 100% 561 B
pulled customer.xml 100% 520 B
pulled home_default_items.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
pulled privacy_whitelist.csv 100% 169 B
pulled apps_default_items.xml 100% 2KB
pulled .support-fbe 100% 0 B
pulled home_default_items.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
pulled apps_widget_default_items.xml 100% 639 B
pulled home_default_items.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
pulled privacy_whitelist.csv 100% 169 B
pulled langlist.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
277 file(s) pulled. 0 file(s) skipped.
/opt/system/csc/ 528 KB/s (77892956 bytes in 143.920s)
Compared with CTI4 files...
Ignored apps folder....
Only this differ:
Code:
SW_Configuration.xml
Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm...
Best Regards

Hi @adfree,is it possible to upload the file to flash please?is it the same for smr830?
Thanks.

adfree said:
Flashed to CTJ5...
Root still work. :angel:
Code:
sdb pull /opt/system/csc/ .\2a\ctj5
pulled com_samsung_health_samd_bp.tpk 100% 3MB
pulled Spotify.tpk 100% 2MB
pulled com_samsung_health_samd_ecg.tpk 100% 1MB
pulled NaverMap.wgt 100% 3MB
pulled TizenFontKaitiChina.wgt 100% 17MB
pulled csc-bin-ver-update.sh 100% 394 B
pulled SW_Configuration.xml 100% 3KB
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 99 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 135 B
pulled applist.ini 100% 196 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 111 B
pulled csc-preset.ini 100% 141 B
pulled csc-preset.ini 100% 141 B
pulled applist.ini 100% 294 B
pulled csc-feature.ini 100% 160 B
pulled csc-preset.ini 100% 99 B
pulled csc-preset.ini 100% 93 B
pulled csc-preset.ini 100% 87 B
pulled applist.ini 100% 172 B
pulled csc-feature.ini 100% 160 B
pulled csc-preset.ini 100% 99 B
pulled applist.ini 100% 319 B
pulled csc-feature.ini 100% 86 B
pulled csc-preset.ini 100% 117 B
pulled csc-preset.ini 100% 141 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled applist.ini 100% 147 B
pulled csc-preset.ini 100% 95 B
pulled applist.ini 100% 147 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 225 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 99 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 231 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 141 B
pulled csc-preset.ini 100% 123 B
pulled csc-preset.ini 100% 117 B
pulled applist.ini 100% 172 B
pulled csc-feature.ini 100% 243 B
pulled csc-preset.ini 100% 87 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 81 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 20 B
pulled csc-preset.ini 100% 141 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 106 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 117 B
pulled applist.ini 100% 320 B
pulled csc-feature.ini 100% 148 B
pulled csc-preset.ini 100% 87 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled applist.ini 100% 147 B
pulled csc-preset.ini 100% 93 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 111 B
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 93 B
pulled applist.ini 100% 154 B
pulled csc-feature.ini 100% 226 B
pulled csc-preset.ini 100% 171 B
pulled poweron.edj 100% 956KB
pulled poweroff.edj 100% 696KB
pulled csc-preset.ini 100% 93 B
pulled csc-preset.ini 100% 135 B
pulled applist.ini 100% 154 B
pulled csc-feature.ini 100% 66 B
pulled csc-preset.ini 100% 189 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 225 B
pulled applist.ini 100% 147 B
pulled csc-feature.ini 100% 53 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 123 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 111 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 105 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 93 B
pulled csc-preset.ini 100% 225 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 117 B
pulled csc-feature.ini 100% 72 B
pulled csc-preset.ini 100% 219 B
pulled csc-preset.ini 100% 141 B
pulled csc-feature.ini 100% 39 B
pulled csc-preset.ini 100% 135 B
pulled zh_TW.zip 100% 1MB
pulled fi_FI.zip 100% 1MB
pulled ro_RO.zip 100% 481KB
pulled km_KH.zip 100% 531KB
pulled it_IT.zip 100% 589KB
pulled cs_CZ.zip 100% 651KB
pulled kk_KZ.zip 100% 450KB
pulled ka_GE.zip 100% 614KB
pulled zh_HK.zip 100% 1MB
pulled is_IS.zip 100% 389KB
pulled hr_HR.zip 100% 539KB
pulled sq_AL.zip 100% 403KB
pulled es_LA.zip 100% 904KB
pulled ms_MY.zip 100% 374KB
pulled da_DK.zip 100% 690KB
pulled ru_RU.zip 100% 959KB
pulled uk_UA.zip 100% 606KB
pulled ja_JP.zip 100% 2MB
pulled th_TH.zip 100% 497KB
pulled zh_CN.zip 100% 1MB
pulled mn_MN.zip 100% 494KB
pulled nb_NO.zip 100% 705KB
pulled uz_UZ.zip 100% 700KB
pulled vi_VN.zip 100% 285KB
pulled ar_SA.zip 100% 729KB
pulled en_GB.zip 100% 759KB
pulled sl_SI.zip 100% 584KB
pulled ko_KR.zip 100% 1MB
pulled sr_RS.zip 100% 531KB
pulled en_US.zip 100% 774KB
pulled de_DE.zip 100% 1MB
pulled jv_ID.zip 100% 489KB
pulled hu_HU.zip 100% 1MB
pulled az_AZ.zip 100% 652KB
pulled fr_CA.zip 100% 522KB
pulled tg_TJ.zip 100% 571KB
pulled fa_IR.zip 100% 510KB
pulled tk_TM.zip 100% 244KB
pulled lt_LT.zip 100% 688KB
pulled tr_TR.zip 100% 1MB
pulled es_ES.zip 100% 905KB
pulled bg_BG.zip 100% 774KB
pulled lo_LA.zip 100% 316KB
pulled he_IL.zip 100% 540KB
pulled mk_MK.zip 100% 490KB
pulled el_GR.zip 100% 637KB
pulled et_EE.zip 100% 740KB
pulled pt_PT.zip 100% 996KB
pulled sv_SE.zip 100% 674KB
pulled pt_BR.zip 100% 995KB
pulled ky_KG.zip 100% 584KB
pulled nl_NL.zip 100% 736KB
pulled lv_LV.zip 100% 589KB
pulled pl_PL.zip 100% 669KB
pulled su_ID.zip 100% 448KB
pulled ur_PK.zip 100% 352KB
pulled tl_PH.zip 100% 363KB
pulled hy_AM.zip 100% 605KB
pulled sk_SK.zip 100% 613KB
pulled fr_FR.zip 100% 523KB
pulled id_ID.zip 100% 422KB
pulled customer.xml 100% 512 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 581 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 610 B
pulled customer.xml 100% 466 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 609 B
pulled customer.xml 100% 620 B
pulled customer.xml 100% 468 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 606 B
pulled customer.xml 100% 465 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 619 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 470 B
pulled customer.xml 100% 607 B
pulled customer.xml 100% 635 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 619 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 607 B
pulled customer.xml 100% 618 B
pulled customer.xml 100% 613 B
pulled customer.xml 100% 611 B
pulled customer.xml 100% 604 B
pulled customer.xml 100% 468 B
pulled customer.xml 100% 464 B
pulled customer.xml 100% 561 B
pulled customer.xml 100% 585 B
pulled customer.xml 100% 617 B
pulled customer.xml 100% 466 B
pulled customer.xml 100% 616 B
pulled customer.xml 100% 464 B
pulled customer.xml 100% 469 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 605 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 600 B
pulled customer.xml 100% 472 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 616 B
pulled customer.xml 100% 463 B
pulled customer.xml 100% 624 B
pulled customer.xml 100% 559 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 605 B
pulled customer.xml 100% 608 B
pulled customer.xml 100% 603 B
pulled customer.xml 100% 600 B
pulled customer.xml 100% 511 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 601 B
pulled customer.xml 100% 602 B
pulled customer.xml 100% 606 B
pulled customer.xml 100% 615 B
pulled customer.xml 100% 600 B
pulled customer.xml 100% 609 B
pulled customer.xml 100% 618 B
pulled customer.xml 100% 561 B
pulled customer.xml 100% 561 B
pulled customer.xml 100% 520 B
pulled home_default_items.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
pulled privacy_whitelist.csv 100% 169 B
pulled apps_default_items.xml 100% 2KB
pulled .support-fbe 100% 0 B
pulled home_default_items.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
pulled apps_widget_default_items.xml 100% 639 B
pulled home_default_items.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
pulled privacy_whitelist.csv 100% 169 B
pulled langlist.xml 100% 1KB
pulled apps_default_items.xml 100% 2KB
277 file(s) pulled. 0 file(s) skipped.
/opt/system/csc/ 528 KB/s (77892956 bytes in 143.920s)
Compared with CTI4 files...
Ignored apps folder....
Only this differ:
Code:
SW_Configuration.xml
Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm...
Best Regards
Click to expand...
Click to collapse
Found a quick solution --- It seems direction of ECG and BP packages is the one with a single TPK / app id packages. Was able to install CTJ5 while preserving BP and ECG. The idea is use ECG+BP tpk installers such those that are going around like 23.tpk or apk4tpk versions in which both ECG+BP are installed as a single package. These versions can be verified as the ones with the Samsung Health Monitor Icon on your watch. with ECG and BP inside.
In short, dont use ecg.tpk or bp.tpk standalone installers as you are bound to lose them on future watch updates

JENJEN01 said:
Flashed to CTJ5...
Root still work. :angel:
Compared with CTI4 files...
Ignored apps folder....
Only this differ:
Found a quick solution --- It seems direction of ECG and BP packages is the one with a single TPK / app id packages. Was able to install CTJ5 while preserving BP and ECG. The idea is use ECG+BP tpk installers such those that are going around like 23.tpk or apk4tpk versions in which both ECG+BP are installed as a single package. These versions can be verified as the ones with the Samsung Health Monitor Icon on your watch. with ECG and BP inside.
In short, dont use ecg.tpk or bp.tpk standalone installers as you are bound to lose them on future watch updates
Click to expand...
Click to collapse
Could you please point me to get the right file. My watch is R820, csc DBT, currently on CTI4. Non samsung phone.
Just got the update to CTJ5, but haven't applied yet

kanyazsombor said:
Could you please point me to get the right file. My watch is R820, csc DBT, currently on CTI4. Non samsung phone.
Just got the update to CTJ5, but haven't applied yet
Click to expand...
Click to collapse
this is the 23.tpk file that has them together, also you might need to downgrade in order to install it
https://mega.nz/file/nJ8jHAgb#9RodbWOivUg_7dpwS-B73Pd1J059g8mUyTRnS3AZYf4

At which stage of the downgrade or version of tizen to install 23.tpk?

JENJEN01 said:
Just got an FOTA update , BP Gone, ECG still there , csc is KOO ...
Had to revert back to R8?0XXU1ASHF to re install BP and ECG then back to R8?0XXU1CTI4 via FOTA.
************ UPDATE ********************
Found a quick solution --- It seems direction of ECG and BP packages is the one with a single TPK / app id packages. Was able to install CTJ5 while preserving BP and ECG. The idea is use ECG+BP tpk installers such those that are going around like 23.tpk or apk4tpk versions in which both ECG+BP are installed as a single package. These versions can be verified as the ones with the one-app Samsung Health Monitor Icon on your watch. with ECG and BP inside.
In short, dont use ecg.tpk or bp.tpk standalone installers as you are bound to lose them on future watch updates
This means, you need to re-install everything again (Via Netodin Firmware downgrade?) and use 23.tpk / apk4tpk with BP+ECG.wgt inside.
Click to expand...
Click to collapse
karam360 said:
this is the 23.tpk file that has them together, also you might need to downgrade in order to install it
https://mega.nz/file/nJ8jHAgb#9RodbWOivUg_7dpwS-B73Pd1J059g8mUyTRnS3AZYf4
Click to expand...
Click to collapse
When I install 23.tpk through sdb on tizen 4007 nothing happens. I mean on the pc it seems installation went through, but the app is not visible on the watch.
Sm R820, csc DBT

kanyazsombor said:
When I install 23.tpk through sdb on tizen 4007 nothing happens. I mean on the pc it seems installation went through, but the app is not visible on the watch.
Sm R820, csc DBT
Click to expand...
Click to collapse
App was kiled by the OS because it is not signed or CSC blocked. Depending on the version of OS, there are strict checking.
Two options, assuming CSC is correct;
1. Sign the 23.tpk with Tizen Studio Certificate Manager (while watch is connected to Tizen Studio Device Manager) and re install again
2. Downgrade to a lower version of the OS (4 0 0 0 6) and install 23.tpk then let the FOTA take place ...

kanyazsombor said:
When I install 23.tpk through sdb on tizen 4007 nothing happens. I mean on the pc it seems installation went through, but the app is not visible on the watch.
Sm R820, csc DBT
Click to expand...
Click to collapse
yes i had the same issue with 23.tpk and the apk4tpk one, they get installed them immediately get deleted from the watch for whatever reason. what i did is install bp and ecg .tpk then just not download the latest update for the watch.
sm R830 my csc is KOO and i tried it on XAR as well

karam360 said:
yes i had the same issue with 23.tpk and the apk4tpk one, they get installed them immediately get deleted from the watch for whatever reason. what i did is install bp and ecg .tpk then just not download the latest update for the watch.
sm R830 my csc is KOO and i tried it on XAR as well
Click to expand...
Click to collapse
You just need to Certificate signed them before installing.

Were you able to root CTJ5 for RM-830?

Related

Google maps reboots froyo

I am on 3.4.3-11 and the phone is pretty good, but sometimes when i starts google maps, the phone becomes unresponsive sometimes i can close it, but sometimes it reboots the phone. Does anyone has a solution for that? As i remember i dont had the problem on eclair?
Root your phone, delete/rename the maps.apk that is in system/app/ folder and download a new one from the market.
It is already rooted so i will try it. I experienced it with other versions of froyo. The maps is already updated, should i uninstall the updates before deleting the apk? I will write back but it usually takes a half day before producing the slowdown and freezing. Did you experienced the issue and deleting the apk and installing a new one from the market solved it?
vick33 said:
It is already rooted so i will try it. I experienced it with other versions of froyo. The maps is already updated, should i uninstall the updates before deleting the apk? I will write back but it usually takes a half day before producing the slowdown and freezing. Did you experienced the issue and deleting the apk and installing a new one from the market solved it?
Click to expand...
Click to collapse
In my case starting maps resulted in extremely slow performance, so I uninstalled the updates through market and renamed the apk with root explorer. After that I installed maps through market and now everything is working perfect. I have had the same maps problem on all the froyo versions.
It was the same for me. Somtimes i can close the maps, but sometimes i had to remove the battery or the phone rebooted itself. I will write back if the problem occures again, but either way thanks for your help!
What connection are you using? Slow connection can often freeze connection based applications, but not cause reboot though.
Deleting and reinstalling the maps application did not help. It was good for 8 hours, but after it the slowdowns appeared again. The CPU usage was not high at all, but the io wait was. This is what top prints out:
Code:
$ $top -n 1
User 12%, System 22%, IOW 65%, IRQ 0%
User 16 + Nice 23 + Sys 73 + Idle 0 + IOW 211 + IRQ 0 + SIRQ 0 = 323
PID CPU% S #THR VSS RSS PCY UID Name
10962 10% S 23 194340K 24660K bg app_58 com.google.android.gm
1388 4% S 70 336836K 61732K fg system system_server
671 4% S 1 0K 0K fg root mmcqd
10713 4% S 11 162220K 13992K bg app_24 com.motorola.blur.home.newsstatus
11049 3% R 1 856K 392K fg app_93 top
353 3% D 1 0K 0K fg root kswapd0
1119 2% S 1 0K 0K fg root kjournald
1608 1% S 29 190900K 13588K bg app_39 com.google.process.gapps
9937 0% S 14 174704K 19816K bg app_113 com.rechild.advancedtaskkiller
1453 0% S 1 1992K 320K fg wifi /system/bin/wpa_supplicant
1259 0% S 1 6068K 1824K fg root /system/bin/vpnclientpm
203 0% S 1 0K 0K fg root kblockd/0
219 0% S 1 0K 0K fg root cpcap_irq/0
279 0% S 1 0K 0K fg root ksuspend_usbd
284 0% S 1 0K 0K fg root khubd
311 0% S 1 0K 0K fg root kmmcd
318 0% S 1 0K 0K fg root bluetooth
352 0% S 1 0K 0K fg root khungtaskd
355 0% S 1 0K 0K fg root aio/0
356 0% S 1 0K 0K fg root ecryptfs-kthrea
358 0% S 1 0K 0K fg root crypto/0
457 0% S 1 0K 0K fg root kxtf9_wq
497 0% S 1 0K 0K fg root mtdblockd
521 0% S 1 0K 0K fg root klink_driver_wq
539 0% S 1 0K 0K fg root usb_mass_storag
547 0% S 1 0K 0K fg root qtouch_obp_ts_w
556 0% S 1 0K 0K fg root bu52014hfv_wq
562 0% S 1 0K 0K fg root als_wq
594 0% S 1 0K 0K fg root bridge_work-que
595 0% S 1 0K 0K fg root bridge_recovery
601 0% S 1 0K 0K fg root w1_bus_master1
610 0% S 1 0K 0K fg root kstriped
612 0% S 1 0K 0K fg root kondemand/0
632 0% S 1 0K 0K fg root als_wq
646 0% S 1 0K 0K fg root usbhid_resumer
649 0% S 1 0K 0K fg root binder
666 0% S 1 0K 0K fg root krfcommd
668 0% S 1 0K 0K fg root dsi
703 0% S 1 0K 0K fg root mmcqd
725 0% S 1 0K 0K fg root pvrflip/0
730 0% S 1 0K 0K fg root ksuspend_usb_ip
731 0% S 1 0K 0K fg root kipcd
1109 0% S 1 0K 0K fg root kjournald
1129 0% S 1 0K 0K fg root kjournald
1132 0% S 1 0K 0K fg root flush-179:32
1143 0% S 1 0K 0K fg root kjournald
1 0% S 1 300K 252K fg root /init
1161 0% S 1 0K 0K fg root gannet
1173 0% S 1 0K 0K fg root smodule
1180 0% S 1 832K 84K fg root /system/bin/smoduled
1222 0% S 4 3312K 152K fg shell /sbin/adbd
1223 0% S 1 1036K 80K fg root /system/bin/ecckeyd
1225 0% S 1 716K 68K fg system /system/bin/servicemanager
1226 0% S 3 3648K 132K fg root /system/bin/vold
1227 0% S 3 3644K 128K fg root /system/bin/netd
1228 0% S 1 576K 48K fg root /system/bin/debuggerd
1231 0% S 8 18508K 436K fg radio /system/bin/rild
1233 0% S 1 788K 84K fg root /system/bin/usbd
1234 0% S 1 716K 76K fg radio /system/usr/bin/nvm_daemon
1237 0% S 7 7172K 140K fg radio /system/bin/gkisystem
1238 0% S 3 3312K 132K fg radio /system/bin/rild_tcmd
1239 0% S 1 1248K 128K fg mot_accy /system/bin/battd
1242 0% S 1 114524K 8804K fg root zygote
1243 0% S 9 35280K 1776K fg media /system/bin/mediaserver
1244 0% S 1 1176K 84K fg bluetoot /system/bin/dbus-daemon
1245 0% S 1 776K 128K fg root /system/bin/installd
1247 0% S 1 1528K 72K fg keystore /system/bin/keystore
1248 0% S 1 736K 80K fg radio /system/xbin/ssmgrd
1250 0% S 2 14220K 416K fg mot_tcmd /system/bin/tcmd
1251 0% S 1 1256K 128K fg radio /system/usr/bin/panic_daemon
1252 0% S 1 196K 36K fg compass /system/bin/akmd2
1254 0% S 2 3304K 284K fg radio /system/usr/bin/brcm_guci_drv
1256 0% S 1 1088K 112K fg mot_tpap /system/bin/secclkd
1260 0% S 1 584K 60K fg nobody /system/bin/RescueStarter
1261 0% S 7 17296K 536K fg radio protocol_driver
1262 0% S 9 10308K 256K fg radio location
1263 0% S 4 4172K 104K fg radio opprofdaemon
1283 0% S 1 660K 72K fg bluetoot /system/bin/hciattach
1427 0% S 1 0K 0K fg root sdio_wq
1429 0% S 1 0K 0K fg root tiwlan_wq
1450 0% S 12 166968K 14436K fg app_14 com.motorola.blur.providers.contacts
1471 0% S 10 176212K 18296K fg app_13 com.android.inputmethod.latin
1476 0% S 26 191948K 15844K fg radio com.android.phone
1479 0% S 35 235820K 17688K fg app_14 com.motorola.blur.service.main
1480 0% S 21 172160K 15792K fg app_26 com.motorola.blur.service.blur
1487 0% S 12 220628K 25304K fg app_24 com.motorola.blur.home
1491 0% S 6 150316K 9060K fg system com.motorola.atcmd
1493 0% S 7 152692K 11392K fg app_20 com.motorola.batterymanager
1506 0% S 7 159528K 11216K fg app_30 com.nuance.android.vsuite.vsuiteapp
1534 0% S 6 150388K 9184K fg system com.motorola.inpocket
1535 0% S 7 160144K 15524K fg app_72 com.motorola.PerformanceManager
1537 0% S 8 152736K 9740K fg app_78 com.motorola.usb
1664 0% S 7 155140K 10944K fg app_73 android.tts
1815 0% S 1 0K 0K fg root loop0
1819 0% S 1 0K 0K fg root kdmflush
1831 0% S 1 0K 0K fg root kcryptd_io
1832 0% S 1 0K 0K fg root kcryptd
2052 0% S 1 0K 0K fg root loop1
2055 0% S 1 0K 0K fg root kdmflush
2056 0% S 1 0K 0K fg root kcryptd_io
2057 0% S 1 0K 0K fg root kcryptd
2125 0% S 1 0K 0K fg root loop2
2128 0% S 1 0K 0K fg root kdmflush
2129 0% S 1 0K 0K fg root kcryptd_io
2130 0% S 1 0K 0K fg root kcryptd
2151 0% S 1 0K 0K fg root loop3
2154 0% S 1 0K 0K fg root kdmflush
2155 0% S 1 0K 0K fg root kcryptd_io
2156 0% S 1 0K 0K fg root kcryptd
7904 0% S 6 150648K 9140K bg app_50 com.svox.pico
8443 0% S 1 760K 92K fg dhcp /system/bin/dhcpcd
8998 0% S 6 150540K 9136K bg app_34 com.android.defcontainer
9006 0% S 6 152416K 9356K bg app_115 com.menny.android.anysoftkeyboard
9412 0% S 9 173572K 16776K bg system com.android.settings
9703 0% S 6 156128K 9772K bg app_3 com.android.calendar
9732 0% S 8 153824K 10720K bg app_4 android.process.media
9758 0% S 6 150564K 9140K bg app_18 com.motorola.btlowbattery
9839 0% S 6 155300K 9528K bg app_14 com.motorola.blur.contacts.data
10136 0% S 6 150872K 9600K bg app_53 com.motorola.android.datamanager
10143 0% S 7 151952K 9416K bg system com.motorola.process.system
10158 0% S 6 150932K 9388K bg app_41 com.motorola.nabsync
10183 0% S 6 150544K 9112K bg app_92 com.motorola.globalunplug
10191 0% S 6 151700K 9588K bg app_17 com.motorola.android.syncml.service
10650 0% S 12 174768K 11448K bg app_140 com.google.android.apps.maps:NetworkLocationService
10665 0% S 7 153296K 9552K bg app_105 net.rgruet.android.g3watchdog
10673 0% S 6 153700K 9236K bg app_24 com.motorola.togglewidgets
10679 0% S 9 159908K 10400K bg app_24 com.motorola.blur.friendfeed
10689 0% S 8 165296K 9964K bg app_24 com.motorola.blur.contacts
10699 0% S 10 172128K 10496K bg app_24 com.motorola.blur.weather
10706 0% S 9 191972K 10780K bg app_24 com.motorola.blur.quickcontact
10720 0% S 6 158148K 9684K bg app_24 com.motorola.blur.home.other
10727 0% S 7 156504K 9632K bg app_24 com.motorola.blur.home.message
10734 0% S 6 160932K 10504K bg app_116 com.maxmpz.audioplayer
10743 0% S 9 156112K 13168K fg app_93 jackpal.androidterm
10758 0% S 7 152504K 9448K bg app_101 com.noshufou.android.su
11022 0% S 1 648K 156K fg app_93 /system/bin/sh
1160 0% S 1 0K 0K fg root gannet_queue/0
2 0% S 1 0K 0K fg root kthreadd
3 0% S 1 0K 0K fg root ksoftirqd/0
4 0% S 1 0K 0K fg root watchdog/0
5 0% S 1 0K 0K fg root events/0
6 0% S 1 0K 0K fg root khelper
9 0% S 1 0K 0K fg root async/mgr
12 0% S 1 0K 0K fg root suspend
199 0% S 1 0K 0K fg root sync_supers
201 0% S 1 0K 0K fg root bdi-default
207 0% S 1 0K 0K fg root omap_serial
215 0% S 1 0K 0K fg root omap2_mcspi
So the case is someting polling the IO so fast that even system processes starve. Then i tried to get what are the exact processes using so much io. under linux i can do that, and no wonder it works under android too:
echo 1 > /proc/sys/vm/block_dump ; cat /proc/kmsg ; echo 0 > /proc/sys/vm/block_dump
During normal opareation kjournald, and flush-179:32 are the only processes using io wrting logs to mmcblk1p25, but when the phone starts to lag a couple process starts to read mmcblk1p21(the sytem) like hell. This is just a short example:
Code:
<7>[46906.785827] er.ServerThread(1396): READ block 33756 on mmcblk1p21 (8 sectors)
<7>[46906.786437] er.ServerThread(1396): READ block 33804 on mmcblk1p21 (8 sectors)
<7>[46906.786773] er.ServerThread(1396): READ block 33820 on mmcblk1p21 (56 sectors)
<7>[46906.787445] pal.androidterm(10743): READ block 33540 on mmcblk1p21 (8 sectors)
<7>[46906.787994] pal.androidterm(10743): READ block 33588 on mmcblk1p21 (64 sectors)
<7>[46906.803344] pal.androidterm(10743): READ block 591296 on mmcblk1p21 (40 sectors)
<7>[46906.804077] pal.androidterm(10743): READ block 591344 on mmcblk1p21 (8 sectors)
<7>[46906.804626] pal.androidterm(10743): READ block 591360 on mmcblk1p21 (16 sectors)
<7>[46906.804962] pal.androidterm(10743): READ block 591416 on mmcblk1p21 (16 sectors)
<7>[46906.818817] Binder Thread #(1556): READ block 606582 on mmcblk1p21 (16 sectors)
<7>[46906.819244] Binder Thread #(1556): READ block 606614 on mmcblk1p21 (32 sectors)
<7>[46906.819824] Binder Thread #(1556): READ block 606686 on mmcblk1p21 (136 sectors)
<7>[46906.820404] Binder Thread #(1556): READ block 606822 on mmcblk1p21 (2 sectors)
<7>[46906.828674] ConnectivityThr(1416): READ block 215246 on mmcblk1p21 (32 sectors)
<7>[46906.829254] ConnectivityThr(1416): READ block 215286 on mmcblk1p21 (40 sectors)
<7>[46906.829803] ConnectivityThr(1416): READ block 215334 on mmcblk1p21 (64 sectors)
<7>[46906.830139] ConnectivityThr(1416): READ block 215406 on mmcblk1p21 (16 sectors)
<7>[46906.830657] ConnectivityThr(1416): READ block 215430 on mmcblk1p21 (8 sectors)
<7>[46906.831207] ConnectivityThr(1416): READ block 215478 on mmcblk1p21 (24 sectors)
<7>[46906.840393] Binder Thread #(1556): READ block 606826 on mmcblk1p21 (8 sectors)
<7>[46906.853302] WebViewCoreThre(9943): READ block 285914 on mmcblk1p21 (136 sectors)
<7>[46906.862487] WebViewCoreThre(9943): READ block 285698 on mmcblk1p21 (8 sectors)
<7>[46906.881317] Binder Thread #(1556): READ block 214730 on mmcblk1p21 (8 sectors)
<7>[46906.881927] Binder Thread #(1556): READ block 214746 on mmcblk1p21 (24 sectors)
<7>[46906.882446] Binder Thread #(1556): READ block 214866 on mmcblk1p21 (8 sectors)
<7>[46906.887115] ConnectivityThr(1416): READ block 582618 on mmcblk1p21 (216 sectors)
<7>[46906.887695] ConnectivityThr(1416): READ block 582836 on mmcblk1p21 (40 sectors)
<7>[46906.907348] ConnectivityThr(1416): READ block 16492 on mmcblk1p21 (24 sectors)
<7>[46906.907989] ConnectivityThr(1416): READ block 16518 on mmcblk1p21 (50 sectors)
<7>[46906.923339] ConnectivityThr(1416): READ block 314154 on mmcblk1p21 (32 sectors)
<7>[46906.923950] ConnectivityThr(1416): READ block 314210 on mmcblk1p21 (200 sectors)
<7>[46906.938934] ConnectivityThr(1416): READ block 557382 on mmcblk1p21 (12 sectors)
<7>[46906.943695] WebViewCoreThre(9943): READ block 286404 on mmcblk1p21 (160 sectors)
<7>[46906.954528] WebViewCoreThre(9943): READ block 284516 on mmcblk1p21 (8 sectors)
<7>[46906.955291] WebViewCoreThre(9943): READ block 284526 on mmcblk1p21 (192 sectors)
<7>[46906.971923] WebViewCoreThre(9943): READ block 288636 on mmcblk1p21 (2 sectors)
<7>[46906.977264] ConnectivityThr(1416): READ block 557374 on mmcblk1p21 (8 sectors)
<7>[46906.983459] wpa_supplicant(1453): READ block 22688 on mmcblk1p21 (24 sectors)
<7>[46906.984161] wpa_supplicant(1453): READ block 22714 on mmcblk1p21 (232 sectors)
<7>[46906.996124] Binder Thread #(1556): READ block 313806 on mmcblk1p21 (80 sectors)
<7>[46906.996704] Binder Thread #(1556): READ block 313894 on mmcblk1p21 (32 sectors)
<7>[46907.009613] Binder Thread #(1556): READ block 582884 on mmcblk1p21 (256 sectors)
<7>[46907.022583] Binder Thread #(1556): READ block 109822 on mmcblk1p21 (168 sectors)
<7>[46907.031280] Binder Thread #(1556): READ block 583880 on mmcblk1p21 (232 sectors)
<7>[46907.044342] Binder Thread #(1556): READ block 591336 on mmcblk1p21 (8 sectors)
<7>[46907.044799] Binder Thread #(1556): READ block 591352 on mmcblk1p21 (8 sectors)
<7>[46907.045318] Binder Thread #(1556): READ block 591376 on mmcblk1p21 (8 sectors)
<7>[46907.045654] Binder Thread #(1556): READ block 591432 on mmcblk1p21 (48 sectors)
<7>[46907.046234] Binder Thread #(1556): READ block 591488 on mmcblk1p21 (52 sectors)
<7>[46907.059722] Binder Thread #(1556): READ block 215502 on mmcblk1p21 (72 sectors)
<7>[46907.060150] Binder Thread #(1556): READ block 215576 on mmcblk1p21 (40 sectors)
<7>[46907.066314] Binder Thread #(1556): READ block 606430 on mmcblk1p21 (8 sectors)
<7>[46907.066925] Binder Thread #(1556): READ block 606494 on mmcblk1p21 (88 sectors)
<7>[46907.067260] Binder Thread #(1556): READ block 606646 on mmcblk1p21 (40 sectors)
<7>[46907.083068] pal.androidterm(10743): READ block 606422 on mmcblk1p21 (8 sectors)
<7>[46907.084655] WebViewCoreThre(9943): READ block 288894 on mmcblk1p21 (256 sectors)
<7>[46907.098815] WebViewCoreThre(9943): READ block 280340 on mmcblk1p21 (72 sectors)
<7>[46907.099639] WebViewCoreThre(9943): READ block 280414 on mmcblk1p21 (56 sectors)
<7>[46907.105194] WebViewCoreThre(9943): READ block 283472 on mmcblk1p21 (24 sectors)
<7>[46907.113708] WebViewCoreThre(9943): READ block 280566 on mmcblk1p21 (16 sectors)
<7>[46907.114410] WebViewCoreThre(9943): READ block 280814 on mmcblk1p21 (88 sectors)
<7>[46907.119415] WebViewCoreThre(9943): READ block 280470 on mmcblk1p21 (88 sectors)
<7>[46907.132141] WebViewCoreThre(9943): READ block 283048 on mmcblk1p21 (168 sectors)
<7>[46907.140594] WebViewCoreThre(9943): READ block 623044 on mmcblk1p21 (12 sectors)
<7>[46907.149017] WebViewCoreThre(9943): READ block 282172 on mmcblk1p21
after i restart the phone i cannot get the error for at least 8 hours. It has to be something with the data connections but i can get the problem on wifi and on 3g too... So i am clueless Anyone has any idea?
I have the same problem. Reinstall the app didn't help.

[DEVS & EXP-USERS ONLY] HTC One X - High I/O wait. Same issue as the N7. (confirmed)

[DEVS & EXP-USERS ONLY] HTC One X - High I/O wait. Same issue as the N7. (confirmed)
This little thread aims at getting some information about an issue I thought for months I am alone with.
Since I got my One X, stock or running custom stuff, my phone always gets sluggish far far beyond the point of being useable if I fill my /data partition with too much data (~1GB free triggers it usually), or move large files around in it (dd'ing some zeros onto it triggers it too).
No kind of rebooting, cache wiping, or anything else will fix it permanently. The lags will be back after a very short while once you experienced them.
Vodafone told me to RMA the phone (it was only software branded), but If you know me, then you know that I am lazy in these kinds of things and since I thought I was the only one and a wipe of /data fixed it every time for a short period, I didn't do it.
Yeah I know. Lazy b*tch.
A few hours ago 'Aux' who had complained about a very sluggish phone a few times already joined IRC and described his problem in more detail and I suddenly made the connection in my mind between my issue and his. He then allowed me to debug that stuff, and I came up with the exact same issue I am facing continuously:
High I/O waits while writing/reading from /data.
This thread aims at gathering intel on this issue. Do not answer here with pointless questions or howto...? stuff.
Ah btw: No, one lag after unlocking the phone is not the issue I am talking about. I mean: ~1-10 fps on the launcher, app opening takes minutes (games) & still lags like hell and downloading apps in the market is close to impossible. (~10byte p second)
So if you don't experience this, don't post logs. I am serious, I will report anyone who wastes my time on that.
To check if your phone suffers from this, run 'top'
if it shows something like this:
Code:
User 2%, System 1%, [COLOR="Red"][B]IOW 74%[/B][/COLOR], IRQ 0%
User 34 + Nice 0 + Sys 18 + Idle 263 + IOW 902 + IRQ 0 + SIRQ 1 = 1218
PID PR CPU% S #THR VSS RSS PCY UID Name
2061 0 1% S 13 471140K 32956K fg u0_a75 com.google.android.apps.reader
519 1 0% S 73 559264K 58024K fg system system_server
1035 1 0% S 20 512864K 63100K fg u0_a86 com.anddoes.launcher
2265 1 0% R 1 1132K 500K root top
[COLOR="red"][B] 105 0 0% D 1 0K 0K root mmcqd/0[/B][/COLOR]
898 1 0% S 14 483120K 60344K fg u0_a39 com.android.systemui
882 0 0% S 1 2768K 1488K wifi /system/bin/wpa_supplicant
435 0 0% S 1 0K 0K root kworker/0:2
173 1 0% S 11 29644K 10104K fg system /system/bin/surfaceflinger
[B][COLOR="red"] 123 1 0% D 1 0K 0K root jbd2/mmcblk0p15[/COLOR][/B]
879 0 0% S 1 0K 0K root irq/340-wl12xx
run 'vmstat', if it looks like this
Code:
procs memory system cpu
r b free mapped anon slab in cs flt us ni sy id wa ir
0 [COLOR="Red"]3[/COLOR] 29488 64232 261024 45956 1788 2723 0 22 0 29 99 [COLOR="red"]96[/COLOR] 0
0 [COLOR="red"]2[/COLOR] 29488 64284 261056 45952 620 905 0 1 0 4 99 [COLOR="red"]99[/COLOR] 0
1 [COLOR="red"]6[/COLOR] 29556 64284 261056 45908 472 755 0 1 0 4 99 [COLOR="red"]99[/COLOR] 0
3 [COLOR="red"]3[/COLOR] 29496 64284 261056 45908 454 680 0 0 0 1 99 [COLOR="red"]99[/COLOR] 0
0 [COLOR="red"]8[/COLOR] 29436 64284 261056 45904 462 767 0 4 0 4 99 [COLOR="red"]98[/COLOR] 0
3 [COLOR="red"]4[/COLOR] 31300 64328 261328 45840 2177 4151 0 50 0 15 99 [COLOR="red"]92[/COLOR] 0
and if 'cat /proc/fs/jbd2/mmcblk0p15-8/info' looks like this too:
Code:
cat /proc/fs/jbd2/mmcblk0p15-8/info
649 transaction, each up to 2196 blocks
average:
0ms waiting for transaction
1460ms running transaction
[B][COLOR="Red"] 16544590ms transaction was being locked[/COLOR][/B]
0ms flushing data (in ordered mode)
710ms logging transaction
603582us average transaction commit time
100 handles per transaction
7 blocks per transaction
8 logged blocks per transaction
Then you are most likely affected.
What I need from you:
Everything the above commands throw out as well as the following:
Code:
echo 1 > /proc/sys/vm/block_dump ; cat /proc/kmsg ; echo 0 > /proc/sys/vm/block_dump
(this is very spammy, you might want to add '> file.log' to the kmsg part)
-----
iostat
-----
iostat -kd 5
(keep it running for about 30 seconds)
-----
cat /proc/meminfo
-----
cat /proc/diskstats
This issue is the same I am facing on my N7. ~2.5Gb free will trigger a very poor performance on the N7 as well, so we have found a general bug in one of the used components (hardware if it's the same, the jbd journaling system, ... )
To figure out what this is exactly I need as much intel as you can gather if your device is in such a state.
I will attach my findings, this thread and all logs gathered on the already existing bug report for the N7 @google. (since it is more likely to get an answer out of them than it is to get one from HTC, sadly)
If you have a N7 facing the same issue:
Attach the logs here too, but please specify that they are from a N7.
It didn't happened to me while using my htc one x (probably because I don't fill the data partition). But I'm sure that low storage makes my nexus 7 slower and laggier(tested it). I hope you can find a solution to that. I will post logs tomorrow because I don't have time right now.
Temporary fix found:
1. Reboot to CWM.
2. Nandroid backup.
3. Factory reset/format data.
4. Nandroid restore.
And HOX back to normal! You can write lots more of data! Incredible!
It would be nice if guys with N7 tested.
So here is my commands output, hope it helps
EDIT: oups, I thought you need only these 3 commands, I didn't read your post to the end, will post the other commands tomorrow
TOP
Code:
User 5%, System 6%, IOW 0%, IRQ 0%
User 17 + Nice 0 + Sys 20 + Idle 279 + IOW 0 + IRQ 0 + SIRQ 0 = 316
PID PR CPU% S #THR VSS RSS PCY UID Name
4480 0 5% R 1 1100K 468K fg app_27 top
571 0 3% S 86 409676K 74528K fg system system_server
4200 0 2% S 14 302320K 49804K fg app_27 jackpal.androidterm
4460 0 1% S 1 0K 0K fg root kworker/0:2
897 0 0% S 13 308828K 65552K fg system com.android.systemui
39 0 0% S 1 0K 0K fg root kworker/u:1
145 0 0% S 33 192540K 9800K fg media /system/bin/mediaserver
142 0 0% S 10 33188K 13436K fg system /system/bin/surfaceflinger
885 0 0% S 1 2716K 1224K fg wifi /system/bin/wpa_supplicant
23 0 0% S 1 0K 0K fg root sync_supers
24 0 0% S 1 0K 0K fg root bdi-default
25 1 0% S 1 0K 0K fg root kblockd
26 0 0% S 1 0K 0K fg root irq/114-tegra_s
27 1 0% S 1 0K 0K fg root spi_tegra-1
28 1 0% S 1 0K 0K fg root irq/125-tegra_s
29 1 0% S 1 0K 0K fg root spi_tegra-3
30 0 0% S 1 0K 0K fg root khubd
31 1 0% S 1 0K 0K fg root irq/118-tps8003
32 1 0% S 1 0K 0K fg root tps65200
33 1 0% S 1 0K 0K fg root rpciod
34 0 0% S 1 0K 0K fg root kworker/0:1
35 1 0% S 1 0K 0K fg root cpu-tegra
36 1 0% S 1 0K 0K fg root cpu-tegra3
37 1 0% S 1 0K 0K fg root cpu-tegra3-plug
38 1 0% S 1 0K 0K fg root baseband_xmm_po
40 1 0% S 1 0K 0K fg root htc_simhotswap
41 1 0% S 1 0K 0K fg root charger_ctrl_ti
42 1 0% S 1 0K 0K fg root batt_timer
43 1 0% S 1 0K 0K fg root khungtaskd
44 1 0% S 1 0K 0K fg root kswapd0
45 1 0% S 1 0K 0K fg root fsnotify_mark
46 1 0% S 1 0K 0K fg root nfsiod
47 1 0% S 1 0K 0K fg root crypto
63 1 0% S 1 0K 0K fg root tegradc.0/a
64 1 0% S 1 0K 0K fg root tegradc.0/b
65 1 0% S 1 0K 0K fg root tegradc.0/c
66 0 0% S 1 0K 0K fg root irq/223-host_sp
67 1 0% S 1 0K 0K fg root nvhdcp1
68 1 0% S 1 0K 0K fg root tegradc.1/a
69 1 0% S 1 0K 0K fg root tegradc.1/b
70 1 0% S 1 0K 0K fg root tegradc.1/c
71 1 0% S 1 0K 0K fg root mhl_sii9234_wq
72 1 0% S 1 0K 0K fg root nct1008
73 1 0% S 1 0K 0K fg root vib
74 1 0% S 1 0K 0K fg root cable_detect
82 1 0% S 1 0K 0K fg root fsl_tegra_udc
83 1 0% S 1 0K 0K fg root f_mtp
84 1 0% S 1 0K 0K fg root file-storage
86 0 0% S 1 0K 0K fg root irq/393-synapti
87 1 0% S 1 0K 0K fg root cm3629_wq
88 1 0% D 1 0K 0K fg root kinteractiveup
89 1 0% S 1 0K 0K fg root kn3ocold
90 1 0% S 1 0K 0K fg root led
91 1 0% S 1 0K 0K fg root led_powerkey
103 1 0% S 1 0K 0K fg root binder
104 1 0% S 1 0K 0K fg root hd-audio0
105 0 0% S 1 0K 0K fg root mmcqd/0
106 0 0% S 1 0K 0K fg root irq/77-tegra_ac
107 0 0% S 1 0K 0K fg root irq/77-tegra_ac
108 1 0% S 1 0K 0K fg root detect
109 1 0% S 1 0K 0K fg root button
110 1 0% S 1 0K 0K fg root HS_PMIC_DETECT
111 1 0% S 1 0K 0K fg root HS_PMIC_BUTTON
112 1 0% S 1 0K 0K fg root HS_GPIO_DETECT
113 1 0% S 1 0K 0K fg root HS_GPIO_BUTTON
114 1 0% S 1 0K 0K fg root poke_queue
115 1 0% S 1 0K 0K fg root rq_stats
116 0 0% S 1 324K 184K fg root /sbin/ueventd
119 0 0% S 1 0K 0K fg root kworker/u:2
120 0 0% S 1 0K 0K fg root jbd2/mmcblk0p12
121 1 0% S 1 0K 0K fg root ext4-dio-unwrit
122 0 0% S 1 0K 0K fg root jbd2/mmcblk0p15
123 1 0% S 1 0K 0K fg root ext4-dio-unwrit
124 0 0% S 1 0K 0K fg root jbd2/mmcblk0p13
125 1 0% S 1 0K 0K fg root ext4-dio-unwrit
126 1 0% S 1 0K 0K fg root jbd2/mmcblk0p3-
127 1 0% S 1 0K 0K fg root ext4-dio-unwrit
128 0 0% S 1 0K 0K fg root jbd2/mmcblk0p18
129 1 0% S 1 0K 0K fg root ext4-dio-unwrit
130 1 0% S 1 0K 0K fg root jbd2/mmcblk0p19
131 1 0% S 1 0K 0K fg root ext4-dio-unwrit
Vmstat
Code:
procs memory system cpu
r b free mapped anon slab in cs flt us ni sy id wa ir
2 0 67328 119288 326872 37496 201 448 0 13 0 8 80 0 0
0 0 67328 119252 326876 37496 224 398 0 19 0 5 77 0 0
0 0 66820 119164 327452 37396 680 1076 0 21 0 15 99 0 0
0 0 66820 119180 327452 37388 188 267 0 10 0 6 86 0 0
0 0 66820 119252 327560 37388 264 517 0 14 0 16 73 0 0
0 0 66820 119252 327576 37388 185 376 0 14 0 6 81 0 0
0 0 66820 119252 327504 37388 233 400 0 15 0 6 82 0 0
1 0 68928 119252 325308 37388 205 399 0 16 0 6 80 0 0
0 0 68928 119252 325312 37388 252 614 0 12 0 11 80 0 0
0 0 68928 119252 325340 37380 245 385 0 10 0 9 81 0 0
0 0 68928 119252 325344 37376 245 408 0 8 0 7 88 0 0
3 0 68928 119252 325344 37376 256 340 0 11 0 14 78 0 0
2 0 68928 119252 325344 37376 283 411 0 10 0 13 81 0 0
0 0 68928 119252 325344 37376 227 421 0 10 0 7 85 0 0
0 0 68928 119252 325348 37376 230 399 0 12 0 11 79 0 0
0 0 68928 119252 325348 37376 201 405 0 11 0 7 85 0 0
1 0 68928 119252 325348 37376 215 392 0 10 0 10 83 0 0
0 0 68928 119252 325352 37376 221 399 0 11 0 8 83 0 0
0 0 68928 119252 325352 37376 202 378 0 12 0 7 84 0 0
0 0 68928 119252 325404 37376 253 793 1 16 0 11 75 1 0
procs memory system cpu
r b free mapped anon slab in cs flt us ni sy id wa ir
0 0 68928 119264 325372 37380 216 409 0 7 0 11 84 0 0
2 0 68928 119264 325376 37380 195 424 0 18 0 6 79 0 0
0 0 68928 119264 325376 37380 207 406 0 11 0 6 86 0 0
0 0 68928 119264 325376 37380 211 400 0 15 0 2 86 0 0
0 0 69672 118380 325484 37380 618 1261 0 38 0 16 49 0 0
2 0 69176 119304 325500 37380 328 787 0 14 0 9 77 0 0
cat /proc/fs/jbd2/mmcblk0p15-8/info
Code:
971 transaction, each up to 2196 blocks
average:
0ms waiting for transaction
370ms running transaction
0ms transaction was being locked
0ms flushing data (in ordered mode)
10ms logging transaction
6714us average transaction commit time
211 handles per transaction
5 blocks per transaction
6 logged blocks per transaction
I'll start by saying I don't have any logs to share. But I experienced the same thing after filling my phone with music. I was overseas and had a useless phone for a week.
Although you said it only seemed to affect your phone, my serial starts with HT23MW, could be from the same batch of phones?
While reading op I recall just saw someone asking JBQ on a Android Building's 4.1.2 in AOSP discussion..
any changes to address this problem?
"Nexus 7 slow when less than 3GB free "
http://productforums.google.com/forum/#!msg/mobile/loqbCbKVMWE/veH_7NAk-YgJ
- show quoted text -
Click to expand...
Click to collapse
I then went back there and follow up the link above..
By reading into the discussion thread at least we can confirmed that Google is working on it and the issue still left un-fix on JRO03S...
:angel:
Tabtoub said:
So here is my commands output, hope it helps
EDIT: oups, I thought you need only these 3 commands, I didn't read your post to the end, will post the other commands tomorrow
TOP
Vmstat
cat /proc/fs/jbd2/mmcblk0p15-8/info
Click to expand...
Click to collapse
Now look into the op, do you see the part where I say you shouldn't post here if you don't have those lags?
Now look again at the op, and check your logs with the one posted, especially the red parts. You notice something?
Thanks for posting logs with no issue present.
fizzlington said:
I'll start by saying I don't have any logs to share. But I experienced the same thing after filling my phone with music. I was overseas and had a useless phone for a week.
Although you said it only seemed to affect your phone, my serial starts with HT23MW, could be from the same batch of phones?
Click to expand...
Click to collapse
Mine is a HT23JW, though I really doubt that it is a hardware issue, or at least not solely a hardware issue.
i am not able to post logs at the moment, but wish to add my experiences to this topic.
Since getting my HOX, i had issues when transferring large amounts of data (music) to the phone. As has been said above, the phone becomes unresponsive, heats up and basically doesn't work until you either: a) wait 24-36hrs with it on charge b) refresh a rom from a nandroid
I moved to custom roms on day 2 of owning the HOX and was most disappointed to see it happen again. I have come up with this workaround to copy music to the phone:
1. mount as usb drive
2. copy as much data as you like over usb
3. after transfer, right click on the usb icon near the clock (in windows) and eject the usb drive from the computer
4. Without ending usb transfer mode on the phone, reboot it.
bizarrely, this stops the lag phase after music transfer. I've been able to do this 4 times successively now without running into the issue. I have no idea why this is???
zombiefly said:
i am not able to post logs at the moment, but wish to add my experiences to this topic.
Since getting my HOX, i had issues when transferring large amounts of data (music) to the phone. As has been said above, the phone becomes unresponsive, heats up and basically doesn't work until you either: a) wait 24-36hrs with it on charge b) refresh a rom from a nandroid
I moved to custom roms on day 2 of owning the HOX and was most disappointed to see it happen again. I have come up with this workaround to copy music to the phone:
1. mount as usb drive
2. copy as much data as you like over usb
3. after transfer, right click on the usb icon near the clock (in windows) and eject the usb drive from the computer
4. Without ending usb transfer mode on the phone, reboot it.
bizarrely, this stops the lag phase after music transfer. I've been able to do this 4 times successively now without running into the issue. I have no idea why this is???
Click to expand...
Click to collapse
I believe that's what I do when I add my music. And haven't had any lag but also.may not have enough on there.
Also, I have a Nexus 7 and TeamViewer if you want to check anything out with the N7
Sent from my EVO using Xparent SkyBlue Tapatalk 2
i had it only once in the past and it never appeared again
also i have it BIG TIME ON MY N7 although the N7 is in general extremely slow in IO
From the symptoms it looks like TRIM is not working.
With ext4 filesystems we need a mount option "discard" to enable this. Of course it's only really affective if we mount using this every time since a format.
Confirmed, it's exactly the same issue as the "Nexus 7 - issue".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can confirm this issue, when you have <1GB of free space available. I didnt pull up terminal to see how bad the IO was, but the UI was crawling. Almost didnt need to, knew it was this issue.
Ill try and pull a log later...
I've compiled fstrim for Android and packaged it inside APK with nice GUI. You can find LagFix tool here. It is much better then backing up and formatting /data. And A LOT faster too!
Permission Denied in app ._. Lags are still available.. -_- especially while typing or something else...
Gesendet von meinem HTC One X mit Tapatalk 2
One-X-master said:
Permission Denied in app ._. Lags are still available.. -_- especially while typing or something else...
Gesendet von meinem HTC One X mit Tapatalk 2
Click to expand...
Click to collapse
Yes, I'm very sorry for not testing on Sense ROMs. I'll fix Sense issue ASAP, but it will take some time to backup and flash few ROMs.
AuxLV said:
Yes, I'm very sorry for not testing on Sense ROMs. I'll fix Sense issue ASAP, but it will take some time to backup and flash few ROMs.
Click to expand...
Click to collapse
Yes ok thank you not a big deal can wait...it's spot to see that there are such fixes ready
Gesendet von meinem HTC One X mit Tapatalk 2
One-X-master said:
Yes ok thank you not a big deal can wait...it's spot to see that there are such fixes ready
Gesendet von meinem HTC One X mit Tapatalk 2
Click to expand...
Click to collapse
In app thread AlexNone notes that chmod did not work and he pasted log. Do you experience the same issue?
I had the same problem on occasion - 100% IOWAIT and the fix was to factory reset and restore from backup. Usually happened after numerous upgrades of the same ROM (so no full wipe for a while but a lot of IO on /system). I also suspected trim/discard was not working, but I thought our phones didn't have anything like that and suspected filesystem corruption.
I also experienced FS corruption that triggered the same behaviour - fsync and journaling is there for a reason and a popular "tweak" is to disable it - bad, bad, bad for consistency...
Btw I just ran LagFix - worked fine, but I was surprised that a second pass trimmed a lot on /data again - about 50% what the first run did... subsequent runs did nothing as expected. (and it worked on a Sense ROM for me ) EDIT: looks like it didn't work after all? After reboot it just trims again the ~same amount of bytes... (nonsensical on /system)
AuxLV said:
In app thread AlexNone notes that chmod did not work and he pasted log. Do you experience the same issue?
Click to expand...
Click to collapse
The is trying to give permssions in data and then the folder where the files are right? The problem is it is always giving me permission denied because fstrim is not working or so...
Gesendet von meinem HTC One X mit Tapatalk 2

Android kernel drinking too much battery?

Hello guys, last night I charged my phone full, went to sleep and 7 hours later I woke up to find it was already on 82% of the battery. The phone only had WIFI on at that moment.
When I check GSAM, it says android kernel was responsible for 44% of the drain. Here is the report:
GSam Labs - Battery Monitor - Export Data
Kernel (Android OS)
Apr 25, 2015 10:49:52 AM
Usage Details
CPU Usage:19m 56s
Bytes Sent:976.10 KB
Bytes Received:459.30 KB
App UID:0
Wakelock Detail
Included Packages
Included Processes
init
kthreadd
ksoftirqd/0
rcuc0
rcun0
sync_supers
bdi-default
khubd
irq/365-max7769
irq/359-max7768
kswapd0
ksmd
ecryptfs-kthrea
s3c-fb
s3c-fb-vsync
file-storage
irq/387-melfas-
kcompcached
irq/352-SSP_Int
ssp_sensorhub_t
mc_fastcall
mmcqd/0
mmcqd/0boot0
mmcqd/0boot1
mmcqd/1
irq/395-sec_tou
ueventd
jbd2/mmcblk0p16
flush-179:0
healthd
vold
netd
debuggerd
zygote
ddexe
daemonsu
loop0
kauditd
dhd_watchdog_th
dhd_dpc
kworker/u:5
kworker/u:7
kworker/u:20
kworker/0:3
kworker/0:0
kworker/0:1
rcuc3
ksoftirqd/3
kworker/3:1
rcuc2
ksoftirqd/2
kworker/2:1
kworker/u:0
rcuc1
kworker/1:1
Thanks in advance.
Tested to today and the problem still persist, left the phone at 99% last night and when i woke up, it was at 87%. Android Kernel drained 46% .
More information please. .
What device. ..rom....kernel. ..mods. you've done. ..etc.
That's a big pond of info we need to narrow down a bit...g

Battery drain 6.0.1

Hi, my battery works normally (48 hrs), but if i make a call from Contacts , the battery lasts about 16 hours. If reboot, the problem is solved. I have images but i can't attach them. Thank you.
Wearable-report
Build: M1D64T
Build fingerprint: 'Sony/tetra/tetra:6.0.1/M1D64T/3508863:user/release-keys'
Bootloader: TETRA_Release_118
Radio: BCM23550_14100_04
Network: (unknown)
Kernel: Linux version 3.10.17+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Nov 3 17:34:00 CET 2016
------ UPTIME MMC PERF (/sys/block/mmcblk0/) ------
stat: 9856 3958 824554 26170 3360 2445 53441 11030 0 16410 37040
stat: read: 16131KB/s write: 2480KB/s
mmcblk0boot0/stat: 2 0 16 0 0 0 0 0 0 0 0
mmcblk0boot0/stat: read: 0KB/s write: 0KB/s
mmcblk0boot1/stat: 2 0 16 10 0 0 0 0 0 10 10
mmcblk0boot1/stat: read: 819KB/s write: 0KB/s
mmcblk0p24/stat: 54 1770 14592 330 0 0 0 0 0 270 320
mmcblk0p24/stat: read: 22639KB/s write: 0KB/s
mmcblk0p26/stat: 4 3 56 10 0 0 0 0 0 10 10
mmcblk0p26/stat: read: 2867KB/s write: 0KB/s
mmcblk0p30/stat: 24 72 756 0 10 2 96 0 0 0 0
mmcblk0p30/stat: read: 0KB/s write: 0KB/s
mmcblk0p31/stat: 7065 470 597274 18630 0 0 0 0 0 8850 18610
mmcblk0p31/stat: read: 16414KB/s write: 0KB/s
mmcblk0p32/stat: 2699 1643 211796 7200 2880 2443 53345 10970 0 9660 18040
mmcblk0p32/stat: read: 15061KB/s write: 2489KB/s
------ MEMORY INFO (/proc/meminfo) ------
MemTotal: 460620 kB
MemFree: 21148 kB
Buffers: 3456 kB
Cached: 159136 kB
SwapCached: 4 kB
Active: 168824 kB
Inactive: 167808 kB
Active(anon): 88600 kB
Inactive(anon): 88856 kB
Active(file): 80224 kB
Inactive(file): 78952 kB
Unevictable: 1592 kB
Mlocked: 0 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 460620 kB
LowFree: 21148 kB
SwapTotal: 32764 kB
SwapFree: 30552 kB
Dirty: 16 kB
Writeback: 0 kB
AnonPages: 175696 kB
Mapped: 121496 kB
Shmem: 1788 kB
Slab: 25936 kB
SReclaimable: 11508 kB
SUnreclaim: 14428 kB
KernelStack: 5048 kB
PageTables: 10804 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 263072 kB
Committed_AS: 7012588 kB
VmallocTotal: 532480 kB
VmallocUsed: 80148 kB
VmallocChunk: 382980 kB
CmaFree: 12676 kB
CmaA(active): 0 kB
CmaA(inactive): 4 kB
CmaF(active): 16 kB
CmaF(inactive): 0 kB
CmaUnevictable: 0 kB
ContigAlloc: 3688 kB
------ CPU INFO (top -n 1 -d 1 -m 30 -t) ------
User 17%, System 22%, IOW 0%, IRQ 0%
User 37 + Nice 1 + Sys 49 + Idle 132 + IOW 0 + IRQ 0 + SIRQ 0 = 219
PID TID PR CPU% S VSS RSS PCY UID Thread Proc
1701 1701 1 9% R 2372K 932K fg shell top top
91 91 1 6% S 0K 0K fg root irq/411-2-0028
459 538 0 5% R 680248K 71456K fg system PhotonicModulat system_server
121 121 0 4% S 1036K 372K fg root ueventd /sbin/ueventd
459 488 0 3% R 680248K 71456K fg system PowerManagerSer system_server
788 788 0 2% S 401304K 29808K fg u0_a2 earable.ambient com.google.android.wearable.ambient
661 783 0 1% S 514612K 75568K fg u0_a3 SpeechThread com.google.android.wearable.app
157 174 0 1% S 35040K 4156K fg system DispSync /system/bin/surfaceflinger
459 468 0 0% R 680248K 71456K fg system HeapTaskDaemon system_server
157 184 0 0% S 35040K 4156K fg system surfaceflinger /system/bin/surfaceflinger
673 673 0 0% R 437216K 47556K fg u0_a15 rable.watchface com.sonymobile.wearable.watchface
459 478 0 0% S 680248K 71456K fg system Binder_1 system_server
459 863 0 0% S 680248K 71456K fg system Binder_A system_server
24 24 0 0% R 0K 0K fg root kworker/0:1
459 506 0 0% S 680248K 71456K fg system SensorService system_server
157 181 0 0% S 35040K 4156K fg system EventThread /system/bin/surfaceflinger
459 529 0 0% S 680248K 71456K fg system UEventObserver system_server
98 98 0 0% S 0K 0K fg root cfinteractive
160 469 0 0% S 13128K 1324K fg root netd /system/bin/netd
154 154 0 0% S 1700K 176K fg root healthd /sbin/healthd
157 531 0 0% S 35040K 4156K fg system Binder_3 /system/bin/surfaceflinger
25 25 1 0% S 0K 0K fg root kworker/1:1
8 8 1 0% S 0K 0K fg root rcu_preempt
157 173 0 0% S 35040K 4156K fg system Binder_1 /system/bin/surfaceflinger
459 459 0 0% S 680248K 71456K fg system system_server system_server
58 58 1 0% S 0K 0K fg root kswapd0
661 661 0 0% R 514612K 75568K fg u0_a3 id.wearable.app com.google.android.wearable.app
459 861 0 0% S 680248K 71456K fg system Binder_8 system_server
43 43 1 0% S 0K 0K fg root i2c_master_rese
46 46 1 0% S 0K 0K fg root i2c_master_rese
[top: 1.434s elapsed]

How to flash samsung device with Odin SS_DL.dll file

how i can flash device via SS_DL.dll
these are the exported function i have found in SS_DL.dll but does not know the paramater and calling sequence
26 00016EF0 Odin_CheckMD5
40 27 00016C70 Odin_Create
41 28 00016FF0 Odin_Destroy
42 29 00016D30 Odin_EnableMD5Check
43 2A 00016FD0 Odin_EndDownload
44 2B 00016CB0 Odin_Init
45 2C 00016E20 Odin_SetBinaryPath
46 2D 00016DF0 Odin_SetDumpPath
47 2E 00016EC0 Odin_SetExtraBinaryPath
48 2F 00016D50 Odin_SetOption
49 30 00016D80 Odin_SetOptionErase
50 31 00016D70 Odin_SetOptionReboot
51 32 00016D90 Odin_SetPacketSize
52 33 00016DC0 Odin_SetPitPath
53 34 00003650 Odin_SetSalesCode
54 35 00016F50 Odin_StartDownload
55 36 00016F90 Odin_StartMultiDownload
pls help any sample code
johnson3143 said:
how i can flash device via SS_DL.dll........
Click to expand...
Click to collapse
Its been a while since I had dealt with this dll file but, I believe that you also need to use the pit file as well.
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Enigma Machine {aenigma = Latin for "Riddle"}.
SS_DL.dll exported functions
do you know the no of parameter and parameter types and return type of each function?
johnson3143 said:
how i can flash device via SS_DL.dll
these are the exported function i have found in SS_DL.dll but does not know the paramater and calling sequence
26 00016EF0 Odin_CheckMD5
40 27 00016C70 Odin_Create
41 28 00016FF0 Odin_Destroy
42 29 00016D30 Odin_EnableMD5Check
43 2A 00016FD0 Odin_EndDownload
44 2B 00016CB0 Odin_Init
45 2C 00016E20 Odin_SetBinaryPath
46 2D 00016DF0 Odin_SetDumpPath
47 2E 00016EC0 Odin_SetExtraBinaryPath
48 2F 00016D50 Odin_SetOption
49 30 00016D80 Odin_SetOptionErase
50 31 00016D70 Odin_SetOptionReboot
51 32 00016D90 Odin_SetPacketSize
52 33 00016DC0 Odin_SetPitPath
53 34 00003650 Odin_SetSalesCode
54 35 00016F50 Odin_StartDownload
55 36 00016F90 Odin_StartMultiDownload
pls help any sample code
Click to expand...
Click to collapse
how you exported this functions can you tell me if you can? and thanks for everyting.
You can download the SS_DL.dll files from the website and put them in the C:\\Windows\System32\SS_DL.dll

Categories

Resources