hello everyone, yesterday I tried to update the 2din with the ROM KLD_LP_rk3188_p_2016-06-22.rar
And it gives me this failure, if you can help me to do it, it works again, I put a photo and video, thanks.
https://imgur.com/sPmxyjT
https://www.youtube.com/watch?v=FJxGvqyU86g
Related
I have an Eonon GA2114 - rk3188, 800*480, KLD2 2.77 MCU, BC6B BT board
With the original Eonon ROM bluetooth is unusable. There is no default device name or PIN. If I type in these, they disappear after reboot. It does not detect either phones or OBD, nor is it detected by phones.
With other KLD ROMs bluetooth is active, can be paired to both phones and OBD but all sound is muted during calls (both ways)
With Joying ROMs, including Malaysk, BT works as it should.
This is clearly a software issue, anyone has any clues about where should I start looking? Are these manufacturers using different BT stack implementations maybe?
Anybody can provide a working rk3188 800*480 Eonon ROM? Not the October 19 ROM also available on this forum, that one has the issue described above.
Hi,
I'm facing the same issue, I have an GA5153V device and contacted Eonon about that but hey keep sending me wrong MCU version and ROM. Can You please tell me which MCU version do You have?
It would be great if someone posts working version of Eonon ROM.
Sn00k said:
Hi,
I'm facing the same issue, I have an GA5153V device and contacted Eonon about that but hey keep sending me wrong MCU version and ROM. Can You please tell me which MCU version do You have?
It would be great if someone posts working version of Eonon ROM.
Click to expand...
Click to collapse
My MCU is a KLD2.
I have requested Eonon to send a compatible ROM, even older, but they say it's the only one available. The ROM they are sending id the one available on this forum in the Factory ROM thread. Eonon appear to just brand generic units and have no technical personnel. I gave up getting a competent answer from them. For now I am on Booroondook's ROM, waiting for Joying to release a Lollipop version.
m00n61 said:
waiting for Joying to release a Lollipop version.
Click to expand...
Click to collapse
At present there is no need to have a bugged (and unfixed by Google) Lollipop 5.0.x on these units, Kitkat 4.4.4 is still the best IMHO.
We'll see in the future what will happen with Marshmellow...
m00n61 said:
My MCU is a KLD2.
I have requested Eonon to send a compatible ROM, even older, but they say it's the only one available. The ROM they are sending id the one available on this forum in the Factory ROM thread. Eonon appear to just brand generic units and have no technical personnel. I gave up getting a competent answer from them. For now I am on Booroondook's ROM, waiting for Joying to release a Lollipop version.
Click to expand...
Click to collapse
Since Eonon is keep sending me KLD2 based mcu even I have KLD(MTCB-KLD-v2.78) by default I cannot use this version because FM radio is not working. I said that to them but again they sent me KLD2, the I gave up on them and now trying to fing some solution to make bluetooth to work.
Can You please tell me where did You download current ROM that You are using?
thx!
Sn00k said:
Since Eonon is keep sending me KLD2 based mcu even I have KLD(MTCB-KLD-v2.78) by default I cannot use this version because FM radio is not working. I said that to them but again they sent me KLD2, the I gave up on them and now trying to fing some solution to make bluetooth to work.
Can You please tell me where did You download current ROM that You are using?
thx!
Click to expand...
Click to collapse
MCU and OS ROM image are independent, even if the Chinese keep sending both you can burn only the Android ROM and leave the MCU untouched.
Anyway, I am currently using this ROM. A more detailed installation procedure is in the first post of the thread.
Go to factory settings and adjust the bt module there. Code is 126.
I was seeing the same thing when I found that option and began playing around.
I am trying to get Carista OBD2 app working on my android auto headunit and it keeps crashing. Lots of other apps crash also. I use Malaysk firmware and am wondering if there is anything I can install that will fix this issue. I upgraded to the latest version of the firmware last month so I am up to date. Any info would be much appreciated since I am new to this stuff.
Thanks,
Riftur said:
I use Malaysk firmware and am wondering if there is anything I can install that will fix this issue. I upgraded to the latest version of the firmware last month so I am up to date.
Click to expand...
Click to collapse
Your head unit is not likely an Android Auto device...
Please read this forum section description.
If your MCU version starts with MTCB then the correct section is:
http://forum.xda-developers.com/android-auto/mtcb-android-head-unit-general
themissionimpossible said:
Your head unit is not likely an Android Auto device...
Please read this forum section description.
If your MCU version starts with MTCB then the correct section is:
http://forum.xda-developers.com/android-auto/mtcb-android-head-unit-general
Click to expand...
Click to collapse
Its a Eonon android head unit.
Any help with this? Carista just crashes on me every anytime I try to connect rob Bluetooth adapter!
Greetings
I am having problems rooting my head unit
i have tried rootmaster and king root but neither work
i have used the *#htc#root# password in settings
NAVISKAUTO 7HD
MTCC-KLD6-V2.97
android 5.1.1 1024x600
RK3188
any suggestions ?
many thanks
wildernessvans said:
Greetings
I am having problems rooting my head unit
i have tried rootmaster and king root but neither work
i have used the *#htc#root# password in settings
NAVISKAUTO 7HD
MTCC-KLD6-V2.97
android 5.1.1 1024x600
RK3188
any suggestions ?
many thanks
Click to expand...
Click to collapse
Yep, a custom ROM, there are 3 types - @Malaysk's, @booroondooks and @dsa8310's available. Or search the "Lollipop for MTCB/MTCC . . ." head unit thread, there has been problems rooting later versions of Lollipop but I cant remember all the details cos I use a custom ROM, but the info will be in that thread od @dsa8310's "October/September Firmware . . ." thread.
typos1
It's great to be in a place where help is at hand . Many thanks this is my first journey into android modding. I will post my results.
Hi All,
I have this unit:
MCU Version
2017-03-21 11:20:39 RUL_(NOR)_90_C9_685x5009_CAN_ALL_Newlap_AMP
CPU Info
Intel Atom 4QuadCore, GPU4D Mail-450 MP4
Android 5.1.1
I would to upgrade to android 6 (or higer). I'm not sure which one choose. I do not want to make a brick. Can you post a link that rom will be ok? Which root procedure is OK for my unit? Is it possible to install the original Joying ROM? My current version radio and menu looks terrible. It's look like from app for kids
I'm sorry for my English.
regards
Hi all,
I just got my huawei matepad 10.4 and did the noob mistake of upgrading it.... Now i'm on 10.1.0.192 and my tablet is BAH3-W09 european and I don't find anywhere the firmware to downgrade and be able to install google services.
Any help?
Thanks!
I have these tablet, I downgraded, but didn't work
What version firmware running ?
I have tried with 10.1.0.118, 10.1.0.197 and 10.1.0.193
Hello everyone, by any means, does anyone know what's the stock firmeware version for matepad 10.4 from Mexico? I lost the paper where I took the version before downgrading using the firmware from the googlefier post (10.1.0.118(C432E4R1P3)). Now I don't have OTA updates.
I really appreciate any help, thanks in advance.
https://drive.google.com/uc?export=view&id=1iKDqcNVsQ7doXq6khYXgZwVpEpT4ouCd That is the lowest version of this tablet. It is likely to tell you that you have to wait because many people have downloaded it, try several times a day.
oMss said:
Hello everyone, by any means, does anyone know what's the stock firmeware version for matepad 10.4 from Mexico? I lost the paper where I took the version before downgrading using the firmware from the googlefier post (10.1.0.118(C432E4R1P3)). Now I don't have OTA updates.
I really appreciate any help, thanks in advance.
Click to expand...
Click to collapse
I was too looking for it, I was searching all the common sites for it... then I ran into a Segunda Mano post... it was for sale... luckly they had a picture for the tablet specs... and there it was...
The original firmware is: 10.1.0.161 C605E2R1P2
It updates to: 10.1.0.197 C605E2R1P2
Now I just need to find it and install it.
So... I got Netflix working at 540p on the native app, the latest version.
And I got Prime Video at 720p on Firefox App, in desktop Mode...
I am... confused by Disney+ It seems to run at 720 in the app, or it may be 1080... not really sure and do not know how to check it, on Firefox it seems to run at 540p... watchable, but the audio is a bit faded. Will try different browsers to see if I can get at least 720 in netflix.
davemon21 said:
I was too looking for it, I was searching all the common sites for it... then I ran into a Segunda Mano post... it was for sale... luckly they had a picture for the tablet specs... and there it was...
The original firmware is: 10.1.0.161 C605E2R1P2
It updates to: 10.1.0.197 C605E2R1P2
Now I just need to find it and install it.
Click to expand...
Click to collapse
I think I found it in the Firmware finder App (available from the playstore or similar), here's the website: https://pro-teammt.ru/ (same as the app and there are some posts here in XDA about that site). I have the 3 files but not sure how to install.
I'm sending you a PM just to get in contact, maybe you know better and help me with the installation.