I can't install Adway on realme 6 pro, it tells me that I have a full partition and that's how I look at the root and it's at 0, what should I do so that there is space in the root or some solution to be able to install adway because I can't put apps on either the system because the root is full
Try to enable Systemless Hosts in Magisk Settings.
The reboot your device and try again.
Related
I have rooted my Mi Max with original MI OS and most of the applications can run with root access but my important application that can change the font was not passed the root permission and as well as adblock application.
I did run with root checker application and it shows that my phone has proper root access but when I applied the font changer application and got error that no root access. I have used latest superSU and busybox, I have no idea to fix up and I have tried to google it but can not find it.
Please let me know if you got experience with that, thanks in advance.
I have a so ( SM-G980F) rooted with EFTsu, and Netflix cant work, reading in the forum I found that Magisk root have a module to solve this.
So my question is, can change the root? or can I install Magisk in my hpone if I rooted with EFTsu ?
me too i wanna
@Toryas
@detcla
Sure you can:
- All your data may be lost (backup it before proceeding)
- Install fresh firmware with Odin, but before you proceed it, patch AP file as I've stated here
- Boot device up and configure it as you're used to do
- Enter Magisk app, Settings, enable MagiskHide and reboot (waaay important step)
- After device reboots, enter Magisk app again just to make sure MagiskHide is enabled
- If you have EdXposed installed, enable 'Pass SafetyNet' setting end reboot again
- Install sefetynet-fix (safetynet-fix-v2.0.0-test2.zip) magisk module from here and reboot
- Enter Magisk app and make sure safetynet checks succeeded
- Clear Play Store app data
- You're done
Here is an short guide on running your stock rom with microG
microG Project
Prerequisites
You need root and magisk installed
Use adb or some appcontrol app to uninstall all google parts: play, gmscore, etcetera. I use https://adbappcontrol.com/en/
1:
Download Riru magisk module: https://github.com/RikkaApps/Riru/releases (or zygisk)
Download LSPosed: https://github.com/LSPosed/LSPosed/releases (riru version)
Download Fakegapps: https://github.com/nift4/FakeGApps/releases
Download microG_Installer_Revived: https://github.com/nift4/microg_installer_revived
Copy the downloaded files to your phone
2:
Install Riru (magisk/modules install from storage), reboot
Install LSPosed (magisk/modules install from storage), reboot
Install fakegapp.apk, reboot
After reboot LSPosed will popup, enable it
Install microG_Installer_Revived (magisk/modules install from storage), reboot
Now you should have microg installed and signature spoofing enabled.
Check screenshot (S22, enyxnos)
does it works even when i can´t mount system RW?
johanstvm said:
does it works even when i can´t mount system RW?
Click to expand...
Click to collapse
Magisk modules are there to circumvent it
I don't get it to work. The microg installer's log always sais «Failure»
Failure [INSTALL_FAILED_VERSION_DOWNGRADE: Package Verification Result]
- Real Play Store not found, installing Fake Store
Failure [INSTALL_FAILED_VERSION_DOWNGRADE: Package Verification Result]
- Done
What can i do?
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install
A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group.Prefered Root Method Oreo Only Using Odin Only For Rev-4 Too Rev10/A
Odin Install Root Method For S7 Flat Can Be Found Here
Odin Install Root Method For S7 Edge Can Be Found Here
Root Method Using Odin Only For Rev-11/B -- Please Read Limitations On The Thread
Rev11/B Root Method For S7 Flat Can Be Found Here
Rev11/B Root Method For S7 Edge Can Be Found Here
ADB Method Oreo Or Nougat For Rev-4 Too Rev10/A -- Must Use Adb Method For Nougat Root
2023_S7_Flat_Edge _ADB_Root_Plus_Safestrap_V1.7z
Directions:
This works for Oreo Rev4-Rev10/A Bootloader Roms or Nougat Rev4
As always there is a chance of bricking your phone
1. Download and extract 2022_S7_Edge_ADB_Root_Plus_Safestrap.7z
2. Reboot your phone to download mode
3. Inside the 2022_S7_Edge_ADB_Root_Plus_Safestrap.7z folder you will find an Odin_Firmware folder. Use Odin and flash the Eng Boot Image for your phone
4. Once phone is rebooted and connected to computer click on the cmd-here.exe and type Install_One_Click.cmd in the command window and hit enter
5. Once root is done and root bat closes your phone will reboot too stock recovery where you must wipe data
6. Once booted click on SuperSu app and update su binary if app ask then reboot
7. Don't flash any superuser zips in recovery that are not made by me or use any other SuperSu apk
Rebooting Too Safestrap Recovery
1. Reboot phone as you would too boot stock recovery Pwr + VolUp + Home. It takes up too 40 seconds too boot recovery. Ignore the mount system errors on info screen
2. Enter recovery.
3. Too leave just reboot system ignore no system installed message if you get it
4. There is screen lag issues on scrolling in recovery. There is aroma file manager that takes care of this issue while in recovery but selecting zips too install may present a problem for this you can use the kernel manager recovery flash option while phone is booted too system. Simply select zip too flash and phone will reboot too recovery and flash it and reboot back too system. Most other function in recovery should work the issue is just scrolling too select files.
5. Flashfire is installed as an alternative as well
Features:
1. SuperSu Root- Do not use any other SuperSu app. Its ok to update su binary if app ask.
2. Safetrap recovery-Still working out scrolling issue
3. Flashfire
4. Kernel tweaks CPU governor set too Conservative
5. Entropy/Swapiness set to High
6. Build Prop tweaks to combat lag
7. Bloat removed from rom
8. Knox removed from rom
Bugs:
Eng Boot Image causes lag
Safestrap Recovery has scrolling issues
Random Reboots will most likely happen
Safetynet will not pass
Battery life may not be optimal
SuperSu cannot be updated
Flashfire may need date changed too 2016 to function if it just keeps closing on you
Volte And Hotspot Fix
View attachment 4555265
Old Downloads
S7_Oreo_Nougat_Adb_Advanced_Root_V12.zip Recommended Root Zip
This zip gives you the option to install some cpu tweaks and will also. Install the entropy tweak that the SEFix app does. The tweak sets entropy to high by default I also include the SEFix app if you want to change the settings. I also set the swappiness settings to very high. If you want to change these settings you can download the speedup swap app from playstore. The above zip also removes knox and changes the fstab.qcom file to disable dm-verity on system files and remove all file encryption which makes it seem to work better and make it compatible with my no root roms that has to have this done to allow safestrap to work. Installing the above zip requires a data wipe unless you have already installed it or you are coming from my non rooted roms
S7_Oreo_Su_Binary_Only_ADB_Root.zip Alternative Root Zip
This root zip is only for oreo an only installs the su binary to the system/xbin folder giving you root privelages it has no tweaks and does not change the fstab.qcomn file to remove dm-verity and system file encryption. There is no SuperSU app installed either but you will have root privelages.
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap
- @me2151 for help and finding alternative flash methods
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for help
- @partcyborg for help and guides other devices root methods
- @elliwigy for being great help when I need it
- @stang5litre
- @jds3118
- @Krog18
If I missed you please pm me
Donations
If you would like to donate please send all donations to @klabit87 PayPal Link Here and give a thanks!
Main Root thread with all discussion is found here
[2022 Root For S7/S7Edge Oreo Rev4_To_Rev10/A_Odin Flashable Or ADB Method] Plus [Limited Root Method Rev11/B _Using Combo_Firmware]
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group. Prefered Root Method Oreo Only Using Odin...
forum.xda-developers.com
how to convert asus rog phone 6 pro chinese version to global rom?
root the phone then flash it, but i dont think there is anyway to root it
concorduser said:
root the phone then flash it, but i dont think there is anyway to root it
Click to expand...
Click to collapse
until now still dont have 1 proper guide to root for 6 pro
I can not found any Official guide for How to convert. Old method worked for Rog 2 is not work anymore on Rog 6.
Found COUNTRY code file and already modified it into WW but fingerprint appeared on phone still remain at CN (with re-flash the whole system package (holos - dallas/texas.raw).
But you can still do following step to gain Device is certified on Play Store and eat FOTA update.
1. Flash WW rom (full rom not OTA), finish all set up.
2. Root your phone, by using Magisk.
(unlock bootloader via official apk from Asus, install Magisk Manager.apk, copy and place original boot.img on your phone and use Magisk Manager on phone to patch it, using CMD and fastboot command on PC to flash boot magisk patched.img, now you have rooted phone with magisk.)
3. With root explorer, navigate to /vendor/factory/COUNTRY open and edit CN to WW.
4. Re-flash WW if you want to make sure if there is any change on your phone. (My vendor fingerprint still not changed into WW).
5. Now you have WW rom on tencent hardware but Play store remain "Device is not certified".
6. Install termux and some modules on Magisk as: MagiskHide Props Config (must have), SElinux permissive (optional), Systemless Hosts, Universal SafetyNet Fix (must have), zygisk - SUI (optional).
7. After reboot your phone, come back to Magisk to make sure MagiskHide Props Config is properly installed. Then open Termux and typing:
su
props
- A short list is appeared on Termux, and you typing 1 to choose option "1 - Edit device fingerprint." then enter
- Choose "f" next to pick option "f - pick a certified fingerprint". then enter
- Choose next "1" to pick up "Asus". then enter
- Choose next "2" to pick up "ROG phone 5" then enter
- Choose next "Yes" to confirm and reboot phone.
Your phone is going to reboot and do a normal clear cache/data with Play Store to force Play Store recognize new status of your phone. Even download and install safetyNet test/check to make sure every thing is green.
Now your phone could eat up FOTA update, not OTA update. But please re-do the patched boot.img with Magisk Manager everytime you do an update by FOTA.
PS: difference between FOTA and OTA is:
FOTA - download update file from Asus HomePage, place it on root of your /SDcard folder, reboot phone and an update notification will show, do an update and it will success.
OTA - download directly via system/system update.
I will add credit later. All that works above is not belong to me.
tuannghia1985 said:
I can not found any Official guide for How to convert. Old method worked for Rog 2 is not work anymore on Rog 6.
Found COUNTRY code file and already modified it into WW but fingerprint appeared on phone still remain at CN (with re-flash the whole system package (holos - dallas/texas.raw).
But you can still do following step to gain Device is certified on Play Store and eat FOTA update.
1. Flash WW rom (full rom not OTA), finish all set up.
2. Root your phone, by using Magisk.
(unlock bootloader via official apk from Asus, install Magisk Manager.apk, copy and place original boot.img on your phone and use Magisk Manager on phone to patch it, using CMD and fastboot command on PC to flash boot magisk patched.img, now you have rooted phone with magisk.)
3. With root explorer, navigate to /vendor/factory/COUNTRY open and edit CN to WW.
4. Re-flash WW if you want to make sure if there is any change on your phone. (My vendor fingerprint still not changed into WW).
5. Now you have WW rom on tencent hardware but Play store remain "Device is not certified".
6. Install termux and some modules on Magisk as: MagiskHide Props Config (must have), SElinux permissive (optional), Systemless Hosts, Universal SafetyNet Fix (must have), zygisk - SUI (optional).
7. After reboot your phone, come back to Magisk to make sure MagiskHide Props Config is properly installed. Then open Termux and typing:
su
props
- A short list is appeared on Termux, and you typing 1 to choose option "1 - Edit device fingerprint." then enter
- Choose "f" next to pick option "f - pick a certified fingerprint". then enter
- Choose next "1" to pick up "Asus". then enter
- Choose next "2" to pick up "ROG phone 5" then enter
- Choose next "Yes" to confirm and reboot phone.
Your phone is going to reboot and do a normal clear cache/data with Play Store to force Play Store recognize new status of your phone. Even download and install safetyNet test/check to make sure every thing is green.
Now your phone could eat up FOTA update, not OTA update. But please re-do the patched boot.img with Magisk Manager everytime you do an update by FOTA.
PS: difference between FOTA and OTA is:
FOTA - download update file from Asus HomePage, place it on root of your /SDcard folder, reboot phone and an update notification will show, do an update and it will success.
OTA - download directly via system/system update.
I will add credit later. All that works above is not belong to me.
Click to expand...
Click to collapse
thanks