Develop Bugs

[ROM][NMF26Q][7.1.1][BETA 5] AOSP Nougat-7.1

Android Open Source Project Nougat For Xperia M​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This rom is based on Android Nougat 7.1 source (android-7.1.1_r6)
I have only made changes that needed to support our device other then that it's pure AOSP. it has no custom features to provide you stock android experience.
Device-specific source code:
Device
Kernel
Vendor Blobs
Discussion thread -->
What's working:
So far i have tested:
RIL (Calls, SMS, Mobile Datal)
Dual sim on Xperia M dual
Display
Camera & Camcorder
Audio and video
Wifi
Bluetooth & Bluetooth Audio
OpenGL rendering
Sensors (accelerometer,compass,light,proximity)
Sdcard
Auto brightness
Notification led
Storage
GPS
Mtp/ptp working same as 6.0
NFC
Note:
It's entirely possible that features not used by me (nor the people I've asked to test) are broken, but overall the device should be usable. You have been warned.
This is BETA so don't treat this as stable version.
AOSP is only for 4.3 baseband. If you are on 4.1/4.2 baseband/firmware then Follow this instruction
TWRP FOTA recovery is recommended for installing aosp, follow this thread for instructions
Download:
BETA 5: https://www.mediafire.com/?ltwb5qgqd22ckfi
For dual sim users: Flash this patch get dual sim working https://www.mediafire.com/?aag77t1w7bi7gg0
Install instructions:
Before you install make sure you are on 4.3 firmware 1st with your bootloader is Unlocked and a TWRP recovery installed. if you haven't installed recovery then flash boot.img from this rom zip via fastboot.
boot into recovery
Wipe data and cache
Flash the rom and gapps zip
Reboot
Upgrading from earlier version:
Boot into Recovery
Flash the rom and gapps zip
Reboot
Reporting bugs:
Before Reporting bugs make sure you
Read "note" section
Using stock kernel
Not installed any mods/tweaks - if you have installed mods like xposed you can't report bug
Not modified system files
Checked the posts below for a solution / fix
Read the last 10 pages of this thread for a post with a similar problem
Backup, reflash with a full wipe (do this if mods like xposed is installed) and check if the bug is still there
provide logcat,kmsg. if you reporting radio problem then provide radio log.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
All developers who is working on sony
Code Aurora Forum
CyanogenMod
XDA:DevDB Information
AOSP Nougat for Xperia M, ROM for the Sony Xperia M
Contributors
PecanCM
Source Code: https://android.googlesource.com/
ROM OS Version: 7.x Nougat
ROM Firmware Required: Stock 4.3 Firmware
Version Information
Status: Beta
Created 2016-08-26
Last Updated 2016-12-21

Changelog
BETA 5 21-12-2016
Updated Platform sources to android-7.1.1_r6(NMF26Q)
Fixed clock app world button force close
Fixed more sepolicy denials
Linux Security fixes
Added missing STK to build
Switched to nougat aosp audio hal
Switched to new xml audio policy configuration
Misc cleanup/fixes/updates
BETA 4 20-11-2016
Updated Platform source to android-7.1.0_r7(NDE63X)
Fixed Video recording "jumping"
Fixed invalid number error
Fixed gapps setup wizard force close
Linux Security fixes
Switched to source built NFC firmware
Updated apn conf from bullhead
Updated adreno renderscript blobs from msm8909 nougat
Misc cleanup/fixes
BETA 3 26-10-2016
Updated Platform source to android-7.1.0_r4(NDE63P)
Attempt to fix RIL with SuperSU on dual sim devices
Linux security fixes
Audio HAL updates from nougat branch
Time service updates
Update other blobs
Misc cleanup/fixes
BETA 2 21-10-2016
Updated Platform source to android-7.0.0_r7(NRD91D)
Security fixes
Time service fixes
Added support for more webviews
BETA 1 19-09-2016
Fixed camcorder
Fixed headset button
Attempt to fix network mode selection on dual sim
ALPHA 3 10-09-2016
Updated Platform sources to android-7.0.0_r4(NRD90S)
Dual sim is now supported
Fixed almost all selinux denials
Fixed FOTA recovery
Fixed Boot led
Security fixes
Added backlight and battery percentage support to offline charging
Updated widevine blobs for Nougat
- apps like netflix/google movies will work now
Updated time-service blobs
Updated camera related blobs
- no more text relocation
Update Power menu
- Added reboot option
- Added airplane mode
- Added ringer modes
ALPHA 2 29-08-2016
Fixed lots of Selinux denials
Fixed stock music app force close
Updated twrp recovery to latest version
Fixed qcril logging (no more diag spam in logcat)
Updated media codec from caf
Security fixes
ALPHA 1 26-08-2016
Initial release

FAQ
Q: Why no root access?
A: This is AOSP rom, not CyanogenMod.
Q: I can't find external sdcard in /ext_card, Why ?
A: Go to /storage you can find there
Q: Where is old browser ?
A: Removed from nougat and replaced with simple shell browser, Use 3rd party browser for all features.
Q: I can't find live wallpapers ?
A: Removed from nougat.

Thank you @PecanCM.
You are really fast. :highfive::highfive:

Yay! FINALLY! We love you Ron
Review: Processing...

Awesome @PecanCM!
Thanks for bringing AOSP Nougat 7.0 to xm!
Smooth and functional for an alpha release!

Thank you!! Gonna test it now!

Thanks for new taste of Android!
Tips:
- Launching persistent TWRP not supported. Only built-in 2.8
So if you have adopted sdcard you can't restore backup.
To fix flash CM13 kernel.
- OpenGapps for 7.0 here
- Feature spotlights here
- File manager in Settings > Storage finally can install APK's, useful for first boot.
- To use 2 apps at same time hold and drag thumbnail in Recents
- Double-tap on Recents works like Alt+Tab (like long press in CM)
- In dev options new option to force move all apps on adopted storage

Bonoboo said:
- Launching persistent TWRP not supported. Only built-in 2.8
So if you have adopted sdcard you can't restore backup.
To fix flash CM13 kernel.
Click to expand...
Click to collapse
FOTA TWRP (recent, most likely 3.0 only) is known & fixed,
logo loops on and on, nothing opening right?
Thanks for confirming.

Thanks a lot, Ron!
GPS is works (tested in Google Maps)

Adrian DC said:
FOTA TWRP (recent, most likely 3.0 only) is known & fixed,
logo loops on and on, nothing opening right?
Click to expand...
Click to collapse
I hadn't adopted sdcard, sorry.
Just noticed old TWRP and therefore possible problem.

Bonoboo said:
Thanks for new taste of Android!
Tips:
- Launching persistent TWRP not supported. Only built-in 2.8
So if you have adopted sdcard you can't restore backup.
To fix flash CM13 kernel.
- OpenGapps for 7.0 here
- Feature spotlights here
- File manager in Settings > Storage finally can install APK's, useful for first boot.
- To use 2 apps at same time hold and drag thumbnail in Recents
- Double-tap on Recents works like Alt+Tab (like long press in CM)
- In dev options new option to force move all apps on adopted storage
Click to expand...
Click to collapse
can you please share cm13 kernel?

Look likes our XM always infront of the other ..

Tried!
Everything's working fine, except:
1. Camera not working.
2. No live wallpapers.
3. Music app crashing every time.

Does anyone have success flashing GApps? On Opengapps wiki is stated that it needs additional ROM patching to disable APK Signature Scheme V2.
---------- Post added at 22:47 ---------- Previous post was at 22:44 ----------
BTW, if FOTA recovery is not working, I can repack the boot image with the latest TWRP 3.0.2-1.

cucumber09 said:
Does anyone have success flashing GApps. On Opengapps wiki is stated that it needs additional ROM patching to disable APK Signature Scheme V2.
---------- Post added at 22:47 ---------- Previous post was at 22:44 ----------
BTW, if FOTA recovery is not working, I can repack the boot image with the latest TWRP 3.0.2-1.
Click to expand...
Click to collapse
i installed GApps, but with error like "command 'log' doesn't exist"
App work fine, but Google Play Services is crashes when i trying add Google account.
And when im rebooting to recovery via terminal, its entered to twrp 2.8 (from this rom) not to fota sadly.

Is it based on 3.4 kernel?

verma.arun833 said:
Is it based on 3.4 kernel?
Click to expand...
Click to collapse
Yes, like all ROMs for our device (and maybe for our entire SoC family).

Can any user test WiFi hopspot for me. And also if pokemon go will work without bugs (sorry I have no time to DL and test myself ATM)

So here are results of my brief testing:
- It booted VERY FAST as there is no ART cache compilation after every update, cache is generated on-the-fly combining JIT and AOT compilation. BTW, not only first boot was fast but the latter ones too, much faster than CM13.
- First boot with Opengapps Pico for 08.26 led to Setup Master's FCs at some moments, yet after some painful experience I've succeed adding Google account and even restoring my apps and settings, which was quite surprising (I was amazed when noticed my ringtone being restored to that from CM13).
- 3G is not working, at least for me. Only EDGE.
- Getting root with the current version of SuperSU appears to be impossible, at least for our device.
- Phone seems to be less responsive, but maybe that's just me, because I regularly use it overclocked to 1.4 GHz.
- TWRP 2.8.0.0 and not working FOTA recovery, seriously? I was forced to repack boot image with the TWRP 3 (just quickly grabbed that from NUI as I'm lazy to repack recovery ramdisk for using in boot image). Some report it working but for me it always booted to the built-in TWRP, both by Vol- and Vol+. BTW, I can upload repacked boot image tomorrow (it is on my personal laptop, I'm writing this from my work one).
I would certainly use it as daily driver if there were root and NUI kernel available. It is very stable for such an early alpha (gosh, Ron started working on it a couple days ago as sources were published) and such an old phone (it debuted 3 years ago), we are very lucky to have so custom-friendly hardware and such a talented developers as Ron and guys working on msm8960 board (another reason I think is that there were no any bringing-pain-in-the-ass changes like ART in 4.4/5.0 and adoptable storage in 6.0). Great work, PecanCM!
I'll continue my testing tomorrow and revert to CM13 later until new SuperSU and NUI are released (or maybe forever if I'll buy new device soon).

[ROM][UNOFFICIAL][10.0][heart] LineageOS 17.1 for Lenovo Z5 Pro GT

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
Torchlight
LED
Fingerprint sensor (FOD)
Slider function (Open slider - answer call or wakeup scren, close slider - end call.)
Broken
Permissive selinux
On first start there is no ringtone and notification sound set, please set in Setting -> Sound
You tell me
Source code:
device : https://github.com/HighwayStar/android_device_lenovo_heart,
kernel: https://github.com/HighwayStar/android_kernel_lenovo_sm8150
vendor: https://github.com/HighwayStar/android_vendor_lenovo_heart
twrp: https://github.com/HighwayStar/android_device_lenovo_heart-twrp
2020-04-04
Fixed issue with fingerprint scanner on maximum brightness
Updated Lineage source
mailru: lineage-17.1-20200404-UNOFFICIAL-heart.zip
gdrive: lineage-17.1-20200404-UNOFFICIAL-heart.zip
Previous versions:
2020-02-21
Fixed issue with microphone in some camera apps
Maybe fixed microphone issue in messengers
Added display Color Profile
Updated Lineage code
mailru: lineage-17.1-20200221-UNOFFICIAL-heart.zip
gdrive: lineage-17.1-20200221-UNOFFICIAL-heart.zip
2020-02-13
Fixed NFC in HCE mode. It used for payments apps such as Google Pay. To make Google Pay to work you still haave to use Magisk Hide
Redone light notification LED
Download
mailru: lineage-17.1-20200213-UNOFFICIAL-heart.zip
gdrive: lineage-17.1-20200213-UNOFFICIAL-heart.zip
2020-02-11
Switch to opensource kernel (please report if found any regression compared to previous build)
Lineage code updated
Download:
mailru: lineage-17.1-20200211-UNOFFICIAL-heart.zip
gdrive: lineage-17.1-20200211-UNOFFICIAL-heart.zip
2020-02-06
Fixed black screen on incoming call
Added DT2W (to enable got to Settings -> Display -> Tap to wake)
Download:
mailru: lineage-17.1-20200206-UNOFFICIAL-heart.zip
gdrive: lineage-17.1-20200206-UNOFFICIAL-heart.zip
2020-02-05
First public release
This release uses prebuilt kernel from ZUI 11.5.141, next version will use oss kernel
mailru: lineage-17.1-20200205-UNOFFICIAL-heart.zip
gdrive: lineage-17.1-20200205-UNOFFICIAL-heart.zip
Previous versions:
How to install
You have to had ZUI 11.5.141 (Android 10 ) isntalled, bootloader unlocked and have TWRP installed
In TWRP clean Data if you coming from stock ROM and do Install of this ROM. If you need Google apps, intall opengapps from TWRP before first boot.
TWRP
twrp 3.3.1-1 built from source without any 3rd party hacks You can build same using twrp tree above. Data decryption, Backup and REstore for stock and custom ROMs supported.
gdrive: twrp-3.3.1-1-heart.img
mailru: twrp-3.3.1-1-heart.img
XDA:DevDB Information
[ROM][UNOFFICIAL][10.0][heart] LineageOS 17.1 for Lenovo Z5 Pro GT, ROM for the Lenovo Z5 Pro GT
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_kernel_lenovo_sm8150
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: ZUI 11.5 Q
Based On: LineageOS
Version Information
Status: Testing
Created 2020-02-05
Last Updated 2020-02-05

Oooh, I wish we had this on Z5 Pro too, it would be soo amazing {;_;}

Wow great work!

Infrared camera working for unlocking the phone? Also do we need to be in 11.5 stable or beta can also? Or it doesn't matter as long as we're on Android 10?

hristcroixqwerty said:
Infrared camera working for unlocking the phone? Also do we need to be in 11.5 stable or beta can also? Or it doesn't matter as long as we're on Android 10?
Click to expand...
Click to collapse
Doesn't matter! Any Android 10 ROM works fine!
---------- Post added at 11:06 PM ---------- Previous post was at 10:47 PM ----------
Testing here. Best Rom ever!
Work: Slide, camera, nfc, fast charging, fingerprint and more.
Needes face detection and always on display shows some bugs!

Great rom!
By the way, are you sure that ZUI 11.5.151 even exists?
I tried it on 11.5.116 at first and wifi didn't work, so I tried to find 11.5.151 and found absolutely no info about this version.
Eventually everything worked fine when I installed this rom on top of 11.5.141.

I tried 2 times to install this rom (from beta stock Android 10), but I still have a problem with WiFi - it didn't find any network. For now I used cellural network to go through configuration process. After configuration I can go to WiFi settings, turn it on and after few seconds it will be automatically turned off.
FYI: I installed nano opengapps before first launch - maybe this causes issues?
highwaystar_ru said:
How to install
You have to had ZUI 11.5.151 (Android 10 ) isntalled, bootloader unlocked and have TWRP installed
In TWRP clean Data if you coming from stock ROM and do Install of this ROM. If you need Google apps, intall opengapps from TWRP before first boot.
Click to expand...
Click to collapse
And what do You mean by "clean data". Should I use:
"Format Data" button or
Advanced Wipe > Select Data > and "Swipe to Wipe" or
just "Swipe to Factory Reset"?

Guziec94 said:
I tried 2 times to install this rom (from beta stock Android 10), but I still have a problem with WiFi - it didn't find any network. For now I used cellural network to go through configuration process. After configuration I can go to WiFi settings, turn it on and after few seconds it will be automatically turned off.
FYI: I installed nano opengapps before first launch - maybe this causes issues?
And what do You mean by "clean data". Should I use:
"Format Data" button or
Advanced Wipe > Select Data > and "Swipe to Wipe" or
just "Swipe to Factory Reset"?
Click to expand...
Click to collapse
I think you only need to clear data..

Updated:
2020-02-06
Fixed black screen on incoming call
Added DT2W (to enable got to Settings -> Display -> Tap to wake)
Links in first message post.

Guziec94 said:
I tried 2 times to install this rom (from beta stock Android 10), but I still have a problem with WiFi - it didn't find any network. For now I used cellural network to go through configuration process. After configuration I can go to WiFi settings, turn it on and after few seconds it will be automatically turned off.
FYI: I installed nano opengapps before first launch - maybe this causes issues?
And what do You mean by "clean data". Should I use:
"Format Data" button or
Advanced Wipe > Select Data > and "Swipe to Wipe" or
just "Swipe to Factory Reset"?
Click to expand...
Click to collapse
Hi, i'm also having issues with WIFI, comming from beta ZUI 11.5. I have tried Reinstall ROM, factory data, clean data-cache-dalvik. Same issue.
Any workarround for this?..
Thanks a lot!

jlvlnzl said:
Hi, i'm also having issues with WIFI, comming from beta ZUI 11.5. I have tried Reinstall ROM, factory data, clean data-cache-dalvik. Same issue.!
Click to expand...
Click to collapse
Wifi issue cn be caused by using not 11.5.141 ZUI, but other version. Kernel used now is prebuilt from ZUI 11.5.141 and it requires same modules (for wifi and audio) that located in /vendor.
This can be solved by flashing 11.5.141 before flashing Lineage or wait till I finish OSS kernel.
I edited first post to mention only 11.5.141 required.

This looks pretty promising. The ROM situation for this device has been pretty bad.
A couple of questions.
(1) what types of scores are we getting on this Rom? Antutu?
(2) any thoughts on when we will have a decent camera that can take advantage of the device optics?

highwaystar_ru said:
Updated:
2020-02-06
Fixed black screen on incoming call
Added DT2W (to enable got to Settings -> Display -> Tap to wake)
Links in first message post.
Click to expand...
Click to collapse
Works fine here! In next update, please fix the fingerprint on max brightness, he stops work in that way.

Great ROM!
Unfortunately I have some problems regarding the fact that while I register the fingerprint i often get errors about the sensor being dirty. After many attempts of registering i managed top save one fingerprint, but that unfortunately i could unlock with other fingers as well, making me believe it wasn't properly registered in primis.
WiFi doesn't work either, and because I don't have access to the closed beta i can't fix this for myself
Can't seem to make audio work either for whatever reason

highwaystar_ru said:
Wifi issue cn be caused by using not 11.5.141 ZUI, but other version. Kernel used now is prebuilt from ZUI 11.5.141 and it requires same modules (for wifi and audio) that located in /vendor.
This can be solved by flashing 11.5.141 before flashing Lineage or wait till I finish OSS kernel.
I edited first post to mention only 11.5.141 required.
Click to expand...
Click to collapse
Hi, thanks for your reply!
I'm having issues to get zui 11.5.141.
First..no problem to get ZUI 10.5.304 then OTA -> 11.1.021.
Second..unlock bootloader, install TWRP, but here either go to 11.5.124 (124-134-141) or 11.5.141 directly, according to 4pda always having error 7 twrp.
Any tips?.
Thanks!
Edit: Now from ZUI 10.5.304 with OTA, just upgrading, you'll get 11.5.141.
Testing ROM, working great!!

Thank you for the TWRP, the OSS kernel, and most importantly -- the first LineageOS (usable as a daily driver) built for our device! Can't wait to have a try haha

the color of the screen is very colorful. How can I change it to normal mode?
Hello, I installed this ROM, but the color of the screen is very colorful. How can I change it to normal mode?

Finally there is hope for our device. Keep up the good work!
I would like to report my experience for the current build (17.1-20200206) :
-Fingerprint appeared on first boot and when the device is unlocked by SmartLock.
-Corner display overlay doesn't set properly like on zui, causing the edge to be jagged
-Notification lights didn't work.
Other than that it's a great rom. I'm currently using it as my daily driver. Looking forward to see more features and fixes in the future!

Antutu score?

Henkl said:
Antutu score?
Click to expand...
Click to collapse
Almost 370.000

[DISCONTINUED][ROM][11.0][STABLE] CAF Android 11 for RN8/8T [LA.UM.9.x][VANILLA/GAPPS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CAF Android 11.0 - LA.UM.9.x
for the Xiaomi Redmi Note 8/8T
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's CAF?
CAF stands for Code Aurora Forum. It's a fork of AOSP which is well optimized for Qualcomm Snapdragon platforms and has a higher degree of performance, battery life, and functionality compared to plain AOSP. In addition to the opensource CAF android base, these builds also use Qualcomm's proprietary Android 11 Board Support Package (BSP) for Snapdragon 665, to ensure maximum compatibility and functionality with Android 11. It can also be called an engineered ROM, as it's built from pure CAF sources and BSP in the same way OEMs do.
CAF system version: LA.QSSI.11.0.r1-07000-qssi.0
CAF vendor version: LA.UM.9.11.r1-02100-NICOBAR.0
Security patch: November 2020
Build status: Stable | Enforcing | User | release-keys
Features on top of pure CAF 11
Merged november security patch and AOSP 11.0_r15 tag
Theming support - accents, fonts, icon packs from pixel 5
Rounded icons and corners by default
Disabled unlock animations
Black as default dark theme
Blur tweaked and enabled by default
Improved scrolling responsiveness
Faster screenshot capture and dismissal
Mini panel for wifi and NFC
QS Panel rows/columns customisation
Auto 3x3 QS panel when media player is hidden
Bluetooth battery level on statusbar
Advanced reboot options
Tweaked statusbar icon paddings
Battery light toggle (ginkgo only)
Dedicated battery saver extended to kernel-level
Removed screen recorder audio restrictions
Double tap to sleep on lockscreen
Xiaomi Parts - dirac, clear speaker
Vulkan as default UI renderer
ART and bionic optimizations
Cleaned up useless CAF apps
Permissions hub
MicroG support
Misc fixes & stability improvements
GApps build features - all of the above, and:
Inbuilt gapps replacing AOSP/CAF apps
Pixel theme by default
Pixel sounds
Pixel dark bootanimation
Pixel launcher
Pixel theme picker
Pixel live wallpapers
Pixel screenshot editor (Markeup)
Enhanced battery stats (Turbo)
Lockscreen Smart Space
Introducing QuicksilveR kernel v2 rebased on CAF's latest android 11 kernel source and 4.14 linux stable merged in!!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
Bluetooth Audio
WiFi/hotspot
VoLTE, VoWiFi
Media (audio/video)
Cameras
Camcorder, EIS
GPS
Fingerprint sensor
Notification LED (on ginkgo)
NFC (on willow)
DRM/widevine
Sensors
IR Blaster
WiFi Display
Enforcing SELinux
Offline charging
FM Radio
SafetyNet
ADB
etc.
What's broken?
Encryption (decrypted by default)
You tell me!
How to install?
MANDATORY - be on latest android 10 firmware
Wipe system, vendor, cache
Format data
Flash ROM
Reboot
Enjoy CAF's Android 11 goodness on your ginkgo/willow!
How to upgrade from an older build?
Wipe system, vendor, cache, dalvik
Flash ROM
Flash MagiskR.zip (optional)
Reboot
How to get root? (optional)
After 1st boot, reboot to recovery, flash MagiskR.zip and reboot.
Downloads (vanilla/gapps)
ROM: https://www.androidfilehost.com/?w=files&flid=319085
Firmware: ginkgo | willow (android 10)
Screenshots
GApps - https://imgur.com/a/6pqCD8q
Vanilla - https://imgur.com/a/hQKIix9
NOTE: Make sure to read the FAQ in post #2 before asking questions. For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.​
XDA:DevDB Information
CAF, ROM for the Redmi Note 8
Contributors
Adithya R
Source Code: [url]https://github.com/caf-ginkgo/kernel_msm-4.14[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Android 10 firmware - MANDATORY
Version Information
Status: Stable
Created 2020-10-26

Changelog
Code:
caf-qssi_ginkgo-11.0-20201026
- Initial release
caf-qssi_ginkgo-11.0-20201104
- Merged november 2020 security patch
- Updated CAF system version to LA.QSSI.11.0.r1-07000-qssi.0
- Fixed reboots at bootanim
- Fixed broken sensors (eg. magnetometer)
- Added exfat sdcard support
- Improved notch cutout to be smooth like MIUI
- Improved UI performance
- Improved bootup speed
- Fixed issues with audio (crackling noise etc.)
- Fixed fingerprint access to external apps and in setup wizard
- Switched to stock thermal engine
- Updated device blobs from MIUI global stable
- Force HAL1 camera for some social media apps
- Improved memory management (scudo/lmkd)
- Fixed fingerprint sensor issues in FPC variants
- Added double tap to sleep on lockscreen
- Added permissions hub (privacy indicators)
- Removed emergency icon from lockscreen
- Other misc fixes and improvements
FAQs
Q: Is MiuiCamera included?
A: No, the MiuiCamera from android 10 doesn't work in 11, so a fresh port from Mi A3 is required whenever android 11 is released for it.
Q: What's the 4 or 5 number beside the wifi icon?
A: It's a CAF feature which shows the 802.11 generation number. 4 stands for 802.11n, 5 stands for AC, 6 for AX and so on.
Q: Does the main rear camera have yellow tint? This bug was there in AOSP 11.
A: No, it has been fixed.
Q: How to get weather in at a glance widget? It just shows me the date
A: There's a quite simple trick for this, just add another instance of at a glance widget manually onto another home screen. The one on the main home screen gets refreshed automatically!
Q: This ROM is laggy! Expected more since its CAF.
A: Most importantly, let the ROM settle after its booted, janks will eventually disappear. In my testing I've faced no lags at all except in the first 10 mins after booting. Do keep in mind that this is an initial A11 release, both from CAF and my side. The kernel used (QSv2) is also in its early stages as it's entirely rebased on android 11 kernel source.
Q: Next update when? ETA PL0X
A: Updates will be dropped as soon as CAF releases a new android 11 tag for our chipset (trinket) or when there's a new security patch available. Please do not spam XDA or telegram for ETAs.

Rom screenshots?

sunset_ms said:
Rom screenshots?
Click to expand...
Click to collapse
It's literally written in the 1st post, use your eyes.

Sir big fan. Thanks for the hard work bro

It's finally here!

stuck on google logo for like 5 Minutes. Is it normal?

pinkman420 said:
stuck on google logo for like 5 Minutes. Is it normal?
Click to expand...
Click to collapse
Have you updated the firmware?

Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work

Thanks for this! Works very good by just following your simple instructions!
I have a question: how can I enable bubble notifications / chats like you've done on the screenshots? Again, thanks a lot for bringing Android 11 to Redmi users!

ku0l

every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
edit: clean installed once again but flash dfe after install rom and magisk at next reboot
NO BOOTLOOPS and boot very fast, rom is smooth no lag and battery usage is better than caf q (reloaded)

nneko904 said:
every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
Click to expand...
Click to collapse
Did u format data and update firmware? For me rom works good, without magisk btw.

nemanjsb said:
Did u format data and update firmware? For me rom works good, without magisk btw.
Click to expand...
Click to collapse
you can't boot without format data, so how do i? also i use stable firmware Q
rom works good for me too, just the problem is when i rebooting it loops albeit it go system everytime it still took long time

Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.

CheepPlüm said:
Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work
Click to expand...
Click to collapse
All the auxiliary cameras are working, use trcam to use them all at one place.
---------- Post added at 03:59 AM ---------- Previous post was at 03:54 AM ----------
DarkLey said:
Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.
Click to expand...
Click to collapse
To fix Redmi note 8 MTP not detected (caf Android11) This fix is for Windows users who doesn't see any MTP devices on their My Computer
1. Plug In your Device
2. Click Start and Search for Device Manager.
3. Search for Android Devices/ADB(Usually at the top of the devices)
4. Uninstall Any ADB drivers installed.
5. Re-insert your phone after uninstall
[Fix Credits - http://t.me/tokatsu ]

whyredFire said:
All the auxiliary cameras are working, use trcam to use them all at one place.
Click to expand...
Click to collapse
Where can I get trcam? Pls give link of working trcam.

Always on Display
How to turn off AOD on this rom? AOD draining so much battery on my device:crying:

Is there any ways to enable encryption?

hi, thanks for your works
my question, is signature spoof is supported?
---------- Post added at 05:20 AM ---------- Previous post was at 05:20 AM ----------
hi, thanks for your works
my question, is signature spoof is supported?

[ROM][11] [User build][Signed]Lineage-18.1-X00TD-Asus Zenfone Max Pro M1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About LineageOS
Lineage-18.1-X00TD-Asus Zenfone Max Pro M1
Build type : UNOFFICIAL
Build and signed by @[email protected] | Rajesh R
Disclaimer : ROMs are built for development purpose only. Use at your own risk.
This ROM completely compiled on lineage source code and with minimum workarounds for a successful build. Builds are signed with release-keys.Before installing, refer instructions and changelog for each builds.
About build variants
ROM-Signed release key-user build
My Projects
lineage-18.1-20210726-X00TD-user-signed.zip
fastboot-lineage-18.1-20210604-X00TD-user-signed-images.zip
lineage-18.1-20210604-recovery-X00TD.img
TWRP recovery X00TD @Vivekachooz
Features
* Changelog-25
*Enforcing selinux and user build properties
* Certified device status under google play
* SafetyNet Test is passed
* Smooth ROM experience
Instructions
Backup procedure and precaution information
Must read before unlocking bootloader and flashing custom ROM
Some explanation regarding the whole widewine L1-L3-Qbeta etc ( Info @ https://t.me/ASUSX00TD from a member )
Starting from Q builds Asus has begun wiping DRM keys if bootloader is unlocked on that build, which is actually default behavior among most other OEMs like pixels, oneplus. Flashing Q builds (Stock beta 1 or latest) or custom ROM on unlocked bootloader through TWRP will permanently loose their L1 certification. widewine keys will be wiped by firmware itself as it detects unlocked bootloader. This also explains why some people, who flashed previous stock Q beta before on locked bootloader, even though first stock Q beta had L3 which means they hadn't fixed L1 on that beta that time , retained their L1/DRM keys on reverting to pie via downgrade zip provided by asus. So in conclusion Asus Q builds/custom ROM will wipe your DRM keys if flashed on Unlocked bootloader. Flashing on locked bootloader shouldn't be any problem!
Also those who have their persist partition backed up in pie should have no problem restoring their DRM keys in case thet got wiped by Q firmware/builds
How to Backup Persist ?
Dump all partitions and make complete backup | Partition layout and structure
Recovery method
use recoveries which support persist partition backup (eg. Orangefox)
Go to recovery > Backup > tick persist > backup > store it safe somewhere with multiple copies.
How to Restore Persist ?
Go to recovery > Restore menu > select backup > tick persist partition > Restore (process similar/different for different recoveries)
Upgrading to LineageOS 18.1
1. Make a backup of your important data
2. Download the build and also Gapps.
3. Download proper addons packages GApps for Android 11/Lineage OS 18.1
4. Make sure your recovery and firmware are up to date
5. For clean flash, Format your system,vendor,data and cache partition partition to install ROM and Gapps.
6. For installing updates format system,vendor and cache partition. keep data partition intact to flash ROM and Gapps.
Secure ROM experience
Avoid permissive selinux and rooting methods for secure ROM experience.
Refer
1. Root & SELinux Risks
2. TWRP password protection
3. TWRP encryption
Screenshots
Upcoming builds ( Only for volunteer testers )
lineage-18.1-20210529-X00TD-user-signed.zip
* To test Safetynet
To test any ROM
Requirements:
Windows/linux Pc
adb drivers
Usb cable.
Steps to take log:
1. Install adb drivers in pc and enable usb debugging mode in phone. Also enable root debugging if needed.
2. Connect phone through usb and type the command "adb logcat -d>logcat.txt" in adb command window.You can choose any name you want for txt file. If needed give admin privilege for adb command window.
3. This procedure can also be used to watch occurance of bugs at realtime by connecting phone at adb mode to pc.
Steps to take boot log:
1. Make sure adb is enabled in phone. Connect the phone in usb mode to pc and open adb command window.
2. Switch off the phone and type "adb logcat -d>bootlog.txt".
3. Initially "waiting for the device" message is noticed on adb command window and switch on the phone now. once the device powers on, boot log is recorded.
log text files are stored in location where adb drivers are installed.
Note : Test builds are released here and intended to test upcoming fixes and features.
Source Code
Kernel source code : https://github.com/LineageOS/android_kernel_asus_sdm660
Kernel developer credits : @SagarMakhar, Lineage Team
Credits
Google's AOSP Project.
Lineage OS for the source code and The Open GApps Project.
Contribute to Lineage OS at https://paypal.me/LineageOS
Contribute to Gapps at https://www.paypal.com/donate/?toke...EScTbkNmciIDl9n5LyDW&country.x=US&locale.x=US
Thanks to developers and their contribution on custom ROM development for Asus zenfone max pro M1.
Special thanks for the build server admin and @abhishekt295
Tester credits
1. @Orion281
2. @patkk
It's all free, but donations are welcome
Donations will be contributed to server maintenance
Support developers on their respective threads
Feedback and bug reports are welcome
Kindly use english language on comment section​

Changelog​
1. lineage-18.1-20210409-UNOFFICIAL-X00TD.zip
* Initial build.
* Engineering build properties
* Permissive selinux.
2. lineage-18.1-20210412-X00TD-user-signed.zip
* Enforcing selinux and user build properties
* Release-key signed.
* Android Verified Boot (AVB)
3. lineage-18.1-20210413-X00TD-user-signed.zip
* Fixes and kernel updates
4. lineage-18.1-20210418-X00TD-user-signed.zip
* New fixes
5. lineage-18.1-20210419-X00TD-user-signed.zip
* Fixes on DTW and battery status LED notification.
* Screen density.
* Vibration intensity control on accessibility settings.
* Clean flash recommended
* OTA support added for upcoming builds
6. OTA : lineage-18.1-20210423-X00TD-user-signed.zip
* Fixes on DTW and battery status LED notification.
* Fixes on SafetyNet Test
* Screen density.
7. OTA : lineage-18.1-20210428-X00TD-user-signed.zip
* Synced with source updates.
8. OTA : lineage-18.1-20210504-X00TD-user-signed.zip
* Synced with source updates.
* lineage recovery and fastboot zip support added.
* Safetynet fixes and lineage kernel updates.
9. OTA : lineage-18.1-20210511-X00TD-user-signed.zip
* Android Verified Boot (AVB) Enabled
* Security patch update
* Kernel updates
10. OTA : lineage-18.1-20210514-X00TD-user-signed.zip
* Updated device fingerprint and vendor patch level from latest asus android 10 beta.
* OTA link fixes.
11. OTA : lineage-18.1-20210517-X00TD-user-signed.zip
* Synced with source updates.
12. OTA : lineage-18.1-20210520-X00TD-user-signed.zip
* OTA Fixes and Synced with source updates.
13. Build : lineage-18.1-20210523-X00TD-user-signed.zip
* Test build with new features.
14. Build : lineage-18.1-20210525-X00TD-user-signed.zip
* AVB disabled and Verity Enabled.
* Locking bootloader supported. Works only with lineage recovery.
Note : Lock only if lineage recovery is flashed. If bootloader locked with twrp. Device fails to boot and only fastboot mode helps to solve the issue to unlock bootloader again.
* Dirty flash on previous build wont work. It is not OTA release. Only clean flash recommended.
* Added variable vibration control.
* Sound control features added.
* New features on dialer app.
* Adaptive sleep features.
15. OTA : lineage-18.1-20210528-X00TD-user-signed.zip
* Safetynet Fix.
* OTA supported only to lineage-18.1-20210525-X00TD-user-signed.zip
16. OTA : lineage-18.1-20210604-X00TD-user-signed.zip
* Synced with source updates and fixes.
17. OTA : lineage-18.1-20210726-X00TD-user-signed.zip
* Synced with source updates and fixes.

I already tested it and have sent you feadback.

SafetyNet is passing on latest build i.e. lineage-18.1-20210412-X00TD-user-signed.zip,

Everything is fine but pubg footsteps sound is very low.

Is GPS working? I couldn't get current location on Maps app...

MISONLN41 said:
Is GPS working? I couldn't get current location on Maps app...
Click to expand...
Click to collapse
Yes, it's working fine for me.

Orion281 said:
Yes, it's working fine for me.
Click to expand...
Click to collapse
Thank you. I'll try clean flash again.

DT2W isn't working in the lockscreen. Any fix?

russelldlongno said:
DT2W isn't working in the lockscreen. Any fix?
Click to expand...
Click to collapse
Checkout bugs. Did you check on other custom kernel?

russelldlongno said:
DT2W isn't working in the lockscreen. Any fix?
Click to expand...
Click to collapse
It's working. I just checked again before replying to you. There's as option "Tape to wake" in display settings. Check if you it enabled. Also make sure you're on latest build.

Orion281 said:
It's working. I just checked again before replying to you. There's as option "Tape to wake" in display settings. Check if you it enabled. Also make sure you're on latest build.
Click to expand...
Click to collapse
I reflash it again using TWRP 3.4.0 by KudProject and currently I'm on firmware 87, yet still not working. What firmware are you using?

Orion281 said:
It's working. I just checked again before replying to you. There's as option "Tape to wake" in display settings. Check if you it enabled. Also make sure you're on latest build.
Click to expand...
Click to collapse
I still can't fix it. I tried flashing firmware 087 via ASUS flash tool, clean flash everything, tried other custom roms if DT2W is working, still this specific ROM gives me headache. I can't find any solutions online either. Tried to flash multiple custom kernels, no luck. So how did you do it?

russelldlongno said:
I still can't fix it. I tried flashing firmware 087 via ASUS flash tool, clean flash everything, tried other custom roms if DT2W is working, still this specific ROM gives me headache. I can't find any solutions online either. Tried to flash multiple custom kernels, no luck. So how did you do it?
Click to expand...
Click to collapse
I'm also on the same firmware as you. I did a clean flash (wiped System, Vendor, Data, and caches). I use OrangeFox recovery. May I ask which build are you using?

Orion281 said:
I'm also on the same firmware as you. I did a clean flash (wiped System, Vendor, Data, and caches). I use OrangeFox recovery. May I ask which build are you using?
Click to expand...
Click to collapse
The latest one (20210413). Still not working. haha

russelldlongno said:
The latest one (20210413). Still not working. haha
Click to expand...
Click to collapse
That's strange. Btw 20210413 build was re uploaded because previous build had some issue. Can you match this MD5 hash (9e92c5deb689891958a7ebfe150c337f) against your zip. Also, can you please post a screenshot of your display settings.

Orion281 said:
That's strange. Btw 20210413 build was re uploaded because previous build had some issue. Can you match this MD5 hash (9e92c5deb689891958a7ebfe150c337f) against your zip. Also, can you please post a screenshot of your display settings.
Click to expand...
Click to collapse
The md5 that you gave is the same with my ZIP file. I can't give you any screenshots, at the moment, 'cause I don't know where's the setting for that. LineageOS seemed to remove it from the power menu. Anyway, there's an option in the "Display" section called "Tap to wake" (disabled by default when you first install the ROM) and I enabled it. I tested it multiple times, on and off, still no luck. What device variant are you using? Mine is 4GB/64GB. It's says on the box, "ZB602KL", but it doesn't support NFC. AFAIK, my model's supposed to support NFC. WEIRD.

russelldlongno said:
The md5 that you gave is the same with my ZIP file. I can't give you any screenshots, at the moment, 'cause I don't know where's the setting for that. LineageOS seemed to remove it from the power menu. Anyway, there's an option in the "Display" section called "Tap to wake" (disabled by default when you first install the ROM) and I enabled it. I tested it multiple times, on and off, still no luck. What device variant are you using? Mine is 4GB/64GB. It's says on the box, "ZB602KL", but it doesn't support NFC. AFAIK, my model's supposed to support NFC. WEIRD.
Click to expand...
Click to collapse
Mine is also 4GB/64GB midel, but it says ZB601KL on its box. This may be the cause of issue that you're facing.

Orion281 said:
Mine is also 4GB/64GB midel, but it says ZB601KL on its box. This may be the cause of issue that you're facing.
Click to expand...
Click to collapse
Maybe? hahaha. Thanks for the reply though. As so you know, I tested some Android 11 ROMs too. I tested DotOS and crDroidand their DT2W feature doesn't work either. I also tested ArrowOS, but it's SELinux status is in "Permissive", so I can't use it. It's DT2W feature works though. Maybe some Android 11 ROMs share the same trees as this one? Who knows? Guess gotta live with it? haha
P.S. I want to use the LineageOS 17.1 from the same dev, but when I crank up the volume in full, the speaker starts to crack and it's pretty annoying.

[12.1][GSI][ROM][ CURTANA | JOYEUSE | EXCALIBUR][AOSP+GAPPS][9/7/22]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Disclaimer:
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
What is this?
An AOSP based ROM, with gapps included and gesture support (pocket, hand wave, pickup).
Based on Android 12.0
1. If you want to root then copy the stock boot from the latest stock rom into internal and use magisk to patch it, then flash the patched boot in bootloader (fastboot flash boot patched_boot.img)
2. I will try to provide monthly patch updates and fixes as needed, don't ask for ETAs... I usually aim for the 5th of each month or whenever Google releases their patches
3. If you are coming from a previous version, I highly recommend clean flashing, otherwise you will probably have issues
Bugs:
You tell me
You tell me? I worked hard to get everything working, I don't see any other issues, please report real issues, not feature requests from MIUI or other roms.
Getting fastbootd drivers working on windows:
1. Download these drivers and unzip
2. follow the instructions here to install the unsigned drivers
3. select the windows inf
Steps:
Please follow these steps closely!
For new installs:
1. Unlock bootloader
2. Download vbmeta from here and flash it in fastboot like this:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_note9s.img (IF YOU DONT DO THIS STEP, VOLTE AND OK GOOGLE WONT WORK!)
3. In bootloader enter: 'fastboot reboot fastboot'
4. After we reboot you will see 'fastbootd', enter 'fastboot flash system system.img' (extract the system.img and put it in the folder you're in
5. enter 'fastboot reboot recovery'
6. select format userdata
7. then select reboot to system
To upgrade from previous versions:
1. Reboot to fastbootd (adb reboot fastboot from inside android or fastboot reboot fastboot from bootloader)
2. After we reboot you will see 'fastbootd', enter 'fastboot flash system system.img' (extract the system.img and put it in the folder you're in
3. Reboot
There is now a toggle to add SuperSU on boot in Phh Settings > Misc:
Just enable it and reboot. (Keep in mind it breaks safteynet, if you need to use a banking app, disable it from settings and reboot)
Downloads:
Latest ROM
@phhusson for his work on GSI (donate to this man, he works on dozens of devices), he worked closely with me to get everything working!
Enjoy!
P.S.
I am not going to add any custom features from other roms so please don't comment about that!
Source: https://github.com/aosp-tissot
Phh source:Link
XDA:DevDB Information
[GSI][ROM][ CURTANA | JOYEUSE | EXCALIBUR][11.0][AOSP+GAPPS][05/11/20], ROM for the Redmi Note 9 Pro
Contributors
sooti, phhusson
Source Code: https://github.com/aosp-tissot
ROM OS Version: Android 12
ROM Kernel: Linux 4.x
ROM Firmware Required: Treble
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-10-17
Created 2020-09-21
Last Updated 2020-11-05​

Changelog:
9/7/22:
* July Google security patch
9/6/22:
* Fixed the fingerprint issue in 12.1 (12L) that prevented me from releasing the latest build
* June security patch (12L)
* Some performance tweaks
* Latest Phh patches
13/12/21:
* December patch
* Latest phh patches
* Fixed battery manager crash
24/11/21:
* Fixed bt offload not working
* Fixed monet not working on other 9S versions
23/11/21:
* November security patch
* Added magisk support
* Added monet (theme based on wallpaper)
* Fixed some props not being written on boot
* Fixed some bt issues
12/10/21:
* Fixed CTS not passing (safteynet)
* Added old behavior of power button
11/10/21:
First Beta
* Android 12 Aosp base
* Optimized dalvik vm for better performance in apps
* Updated Gapps wizard and core apps to A12 base
Please report issues

RESERVED...

A job well done, thank you for keeping Curtana alive!

Any issues with your install?

Nice, thanks for the hard work, miatoll rock

New build is on the way, should fix safteynet not passing and return the old behavior of the power button
EDIT: New build is up
Changes:
* Fixed CTS not passing (safteynet), please clear google play services data if you already flashed the old build, if you enable supersu from settings then it will break again so keep in mind, its only for unrooted
* Returned the power button to the old behavior

sooti said:
New build is on the way, should fix safteynet not passing and return the old behavior of the power button
EDIT: New build is up
Changes:
* Fixed CTS not passing (safteynet), please clear google play services data if you already flashed the old build, if you enable supersu from settings then it will break again so keep in mind, its only for unrooted
* Returned the power button to the old behavior
Click to expand...
Click to collapse
Is it possible to implement a setting to have 2 behaviours of the power button as on stock? Press to unlock, or touch to unlock? Press is really preferable as it prevents accidental unlocks when carrying the phone around with the screen off.

Thanks for your hard work.
I Will install the ROM when I get back from Holiday.
Still 3 weeks

Can anyone post some screenshots??

foneiamone said:
Can anyone post some screenshots??
Click to expand...
Click to collapse
It seems there is a problem with screenshot shortcut. I took these using google assistant.

Hello. Is there call recording?

And can i upgrade from android 11? Should i wipe the phone?

mib383 said:
Hello. Is there call recording?
Click to expand...
Click to collapse
Not that I know of.

mib383 said:
And can i upgrade from android 11? Should i wipe the phone?
Click to expand...
Click to collapse
I'm not sure but i think you can upgrade from Android 11. Although i would recommend wiping the phone and doing a clean install.

Thank's for the great work. Audio bluetooth not work, the app phone work ok but show a message when os opened. Android auto don't work, when connect original USB cable, the car detect Android auto but the screen is black. With other curtana MIUI work fine.
Great work!!

I have installed it. But my magisk is broken now as i understand. Can i bring it ti life? Or i should delete it?

rezzocapo said:
Thank's for the great work. Audio bluetooth not work, the app phone work ok but show a message when os opened. Android auto don't work, when connect original USB cable, the car detect Android auto but the screen is black. With other curtana MIUI work fine.
Great work!!
Click to expand...
Click to collapse
Bluetooth works fine here, what device are you using? and what firmware is your vendor?

mib383 said:
I have installed it. But my magisk is broken now as i understand. Can i bring it ti life? Or i should delete it?
Click to expand...
Click to collapse
Off topic, magisk isnt supported by me...

sooti said:
Bluetooth works fine here, what device are you using? and what firmware is your vendor?
Click to expand...
Click to collapse
I'm using curtana 9S. I don't know firmware vendor version. How to get It or flash it?