Develop Bugs

Pixel 2 XL Root [Going Mad About]

Hi everyone,
I'm going mad about Pixel 2 XL Root. I'm Trying to use Magisk v18 on latest Android versione but I'm not able to root the device.
Everytime I try to flash Magisk the screen stays loading Google Icon in loop forever and ever. I've tried every guide on the web whitout success.
Anyone can help me?
[Edit]
Theese are the steps i take
-flash recovery twrp (ok)
-reboot to recovery (ok)
-flash magisk v18 (loop)

megamarini said:
Hi everyone,
I'm going mad about Pixel 2 XL Root. I'm Trying to use Magisk v18 on latest Android versione but I'm not able to root the device.
Everytime I try to flash Magisk the screen stays loading Google Icon in loop forever and ever. I've tried every guide on the web whitout success.
Anyone can help me?
Click to expand...
Click to collapse
All the usual preemptive steps are complete, correct? You OEM unlocked it and all that?

djcrystals said:
All the usual preemptive steps are complete, correct? You OEM unlocked it and all that?
Click to expand...
Click to collapse
Sure mate, I have rooted every smartphone owned since Xperia X8 and this is a very strange behaviour for me.

megamarini said:
Sure mate, I have rooted every smartphone owned since Xperia X8 and this is a very strange behaviour for me.
Click to expand...
Click to collapse
Don't feel too bad my friend, the P2XL is a quirky little bugger to say the least. I had a heck of a time rooting 9.0 after I updated from 8.1, then outa the blue, it worked. Here's a few steps to try.
1. Fastboot twrp, then flash magisk, try to boot.
2. Fastboot twrp, flash twrp.zip, boot up, then go back to twrp and flash magisk. If no go, do the same steps, except after you flash magisk, flash the magisk uninstaller zip, then flash magisk again.
3. Fastboot into twrp, flash twrp.zip, custom kernel.zip, then magisk.zip. if no go, then try the magisk uninstaller.zip method again.
4. Stick with it, be patient, sooner or latter you'll find the right combo. Also, it seems easier to root using a custom kernel, if your willing to try it :good:

Badger50 said:
Don't feel too bad my friend, the P2XL is a quirky little bugger to say the least. I had a heck of a time rooting 9.0 after I updated from 8.1, then outa the blue, it worked. Here's a few steps to try.
1. Fastboot twrp, then flash magisk, try to boot.
2. Fastboot twrp, flash twrp.zip, boot up, then go back to twrp and flash magisk. If no go, do the same steps, except after you flash magisk, flash the magisk uninstaller zip, then flash magisk again.
3. Fastboot into twrp, flash twrp.zip, custom kernel.zip, then magisk.zip. if no go, then try the magisk uninstaller.zip method again.
4. Stick with it, be patient, sooner or latter you'll find the right combo. Also, it seems easier to root using a custom kernel, if your willing to try it :good:
Click to expand...
Click to collapse
Thank You mate, when I'll get home I'll try to follow yor steps and I'll let you know. Any suggestion about kernel on stock firmware? ElementalX it's ok?

Had the SAME problem yesterday:
Fastbooted TWRP
Flashed TWRP
Flashed Magisk
---> STUCK
Flashed TWRP
Flashed Magisk
---> BOOTED UP

Sui77 said:
Had the SAME problem yesterday:
Fastbooted TWRP
Flashed TWRP
Flashed Magisk
---> STUCK
Flashed TWRP
Flashed Magisk
---> BOOTED UP
Click to expand...
Click to collapse
Tryed everything but nothing works..

megamarini said:
Tryed everything but nothing works..
Click to expand...
Click to collapse
Maybe give the guide linked in my sig a shot.
If that doesn't help, try the following:
-once you've permanently installed TWRP, try rebooting to recovery after each additional step BEFORE rebooting to system:
install cust kernel, reboot to recovery, reboot to system
install magisk, reboot to recovery, reboot to system
if that doesn't work, try doing a mass install after TWRP is permanently installed:
in the same flash, install cust kernel and magisk, reboot to system
These have helped other users who have had odd issues with their set ups, but in the end, Pixel 2 XL is a fickle beast
Best of luck!

Az Biker said:
Maybe give the guide linked in my sig a shot.
If that doesn't help, try the following:
-once you've permanently installed TWRP, try rebooting to recovery after each additional step BEFORE rebooting to system:
install cust kernel, reboot to recovery, reboot to system
install magisk, reboot to recovery, reboot to system
if that doesn't work, try doing a mass install after TWRP is permanently installed:
in the same flash, install cust kernel and magisk, reboot to system
These have helped other users who have had odd issues with their set ups, but in the end, Pixel 2 XL is a fickle beast
Best of luck!
Click to expand...
Click to collapse
SOLVED
The only way (for me) to root my Pixel 2 XL is follow theese steps:
Rooting with Magisk
NOTE #4: This section assumes you are not going to install TWRP. If you are, skip to the next section and just flash the latest Magisk zip after installing TWRP.
Download the Magisk zip from the official thread and install the manager from the zip.
Grab a boot image to patch (either the one from the latest factory image or a custom kernel one) and push it to your device:
Code:
adb push <path_to_file> /sdcard/Download
Open Magisk Manager and click the Install button.
Click "Install" at the first prompt then choose "Patch Boot Image File". A file manager will pop up.
Select the boot image you want to patch and let Magisk Manager patch it.
Pull it off your device:
Code:
adb pull /sdcard/MagiskManager/patched_boot.img
Reboot into the bootloader:
Code:
adb reboot bootloader
Flash the boot image and reboot.
Code:
fastboot flash boot patched_boot.img
fastboot reboot
Open Magisk Manager and you should be rooted!
Source: XDA Post
Thank you so much to everyone who tried to help me!

Damn Root......

No matter what I try I am unable to root my P2XL on Android 10......
The process I am taking is to boot up twrp and flash the latest Magisk zip, however it fails right at the end with the error failed to mound system and vendor.....
I have just tried to do it again but with a clean install of the October update but nothing has changed.......
the October update wasn't without issue either as that too failed and I had to factory reset the September image and update OTA.....
anyway, any thoughts or advice on how to achieve it or what might be wrong.......
is there specific TWRP versions I need to boot from etc,,,,

Don't bother with twrp
Just use magisk.
Download the factory pixel image on your PC , unzip the boot.img file and transfer to your phone.
Open magisk manager and install magisk by patching the boot.img file U just transferred.
Copy that new patched boot img back to your PC.
Use ADB to ADB reboot bootloader
Type: fastboot flash boot patched_boot.img
That's it

mediaman123 said:
No matter what I try I am unable to root my P2XL on Android 10......
The process I am taking is to boot up twrp and flash the latest Magisk zip, however it fails right at the end with the error failed to mound system and vendor.....
I have just tried to do it again but with a clean install of the October update but nothing has changed.......
the October update wasn't without issue either as that too failed and I had to factory reset the September image and update OTA.....
anyway, any thoughts or advice on how to achieve it or what might be wrong.......
is there specific TWRP versions I need to boot from etc,,,,
Click to expand...
Click to collapse
Since it has been a few months since I messed with my 2 XL, I followed the upgrade 9x guide in my sig to make sure I didn't forget/skip anything.
I just jumped to 10 last night, root, twrp, and cust kernel.
fastboot latest factory image (I left the -w intact for a clean wipe since going form 9 to 10-but have read it is not necessary)
booted back into bootloader and fastboot boot twrp 3.3.3-0.img
once in twrp I install 3.3.3-0
in twrp installed latest EX kernel for 10
rebooted to system
let it boot up fully for a few minutes
booted into twrp
flashed magisk 19.4
rebooted to trwp (superstition for me)
rebooted to system
checked magisk hide in magisk manager
hit systemless hosts in magisk manager
rebooted
Fresh install of android 10, rooted, with cust kernel.
You mentioned the "failed" notice. I've read several places that TWRP will throw the "failed to mount" warning (or something like that) but that it is a false flag. I got this as well and just continued on.
There may be many diff ways to accomplish this, but THIS method worked for me.

Az Biker said:
[/HIDE]
Since it has been a few months since I messed with my 2 XL, I followed the upgrade 9x guide in my sig to make sure I didn't forget/skip anything.
I just jumped to 10 last night, root, twrp, and cust kernel.
fastboot latest factory image (I left the -w intact for a clean wipe since going form 9 to 10-but have read it is not necessary)
booted back into bootloader and fastboot boot twrp 3.3.3-0.img
once in twrp I install 3.3.3-0
in twrp installed latest EX kernel for 10
rebooted to system
let it boot up fully for a few minutes
booted into twrp
flashed magisk 19.4
rebooted to trwp (superstition for me)
rebooted to system
checked magisk hide in magisk manager
hit systemless hosts in magisk manager
rebooted
Fresh install of android 10, rooted, with cust kernel.
You mentioned the "failed" notice. I've read several places that TWRP will throw the "failed to mount" warning (or something like that) but that it is a false flag. I got this as well and just continued on.
There may be many diff ways to accomplish this, but THIS method worked for me.
Click to expand...
Click to collapse
I used a similar method:
I used Duece's Script to flash and format data with April image ( I wanted to able to decrypt with pattern lock); rebooted to system; then rebooted back into bootloader and used Duece's Script to flash but not format data with October image; booted back into bootloader and fastboot boot twrp 3.3.0-0.img; in twrp, flashed 3.3.0-0 zip, rebooted to system, and did initial phone set up; rebooted to twrp, flashed caesium kernel and magisk 19.3 and rebooted to system. Everything worked fine. I did get failed to mount" warning in twrp but both the kerkel and magisk worked fine.

Az Biker said:
[/HIDE]
Since it has been a few months since I messed with my 2 XL, I followed the upgrade 9x guide in my sig to make sure I didn't forget/skip anything.
I just jumped to 10 last night, root, twrp, and cust kernel.
fastboot latest factory image (I left the -w intact for a clean wipe since going form 9 to 10-but have read it is not necessary)
booted back into bootloader and fastboot boot twrp 3.3.3-0.img
once in twrp I install 3.3.3-0
in twrp installed latest EX kernel for 10
rebooted to system
let it boot up fully for a few minutes
booted into twrp
flashed magisk 19.4
rebooted to trwp (superstition for me)
rebooted to system
checked magisk hide in magisk manager
hit systemless hosts in magisk manager
rebooted
Fresh install of android 10, rooted, with cust kernel.
You mentioned the "failed" notice. I've read several places that TWRP will throw the "failed to mount" warning (or something like that) but that it is a false flag. I got this as well and just continued on.
There may be many diff ways to accomplish this, but THIS method worked for me.
Click to expand...
Click to collapse
Hi, by "checked magisk hide", do you mean that you were able to bypass google's safetynet?
I havn't rooted my P2 XL on A10 since i wasn't sure i will be able to bypass safetynet!
thx

1902 said:
Hi, by "checked magisk hide", do you mean that you were able to bypass google's safetynet?
I havn't rooted my P2 XL on A10 since i wasn't sure i will be able to bypass safetynet!
thx
Click to expand...
Click to collapse
My safety net passes in magisk, but I don't use any apps that I can verify that with.

jlokos said:
I used a similar method:
I used Duece's Script to flash and format data with April image ( I wanted to able to decrypt with pattern lock); rebooted to system; then rebooted back into bootloader and used Duece's Script to flash but not format data with October image; booted back into bootloader and fastboot boot twrp 3.3.3-0.img; in twrp, flashed 3.3.3-0 zip, rebooted to system, and did initial phone set up; rebooted to twrp, flashed caesium kernel and magisk 19.3 and rebooted to system. Everything worked fine. I did get failed to mount" warning in twrp but both the kerkel and magisk worked fine.
Click to expand...
Click to collapse
Hi, for TWRP, are you using 3.3.0.0 or 3.3.3.0
I was only able to find 3.3.0.0
Thanks

docluv01 said:
Hi, for TWRP, are you using 3.3.0.0 or 3.3.3.0
I was only able to find 3.3.0.0
Thanks
Click to expand...
Click to collapse
Sorry; an extra 3; I'm using TWRP 3.3.0.0.
---------- Post added at 07:58 AM ---------- Previous post was at 07:37 AM ----------
1902 said:
Hi, by "checked magisk hide", do you mean that you were able to bypass google's safetynet?
I havn't rooted my P2 XL on A10 since i wasn't sure i will be able to bypass safetynet!
thx
Click to expand...
Click to collapse
I DL magisk hide module and use it for two apps, one for comcast business and the other which regulates my home thermostat.

Wow, thanks guys.....you have all laid out pretty well your processes which I will go through later on....
It's strange, as everything is installed and magisk believes it working it just doesn't pass thee root check..
I'll get back to you with my progress...??

Problems rooting Xt-1952-1

Hey guys,
Hope someone can help me or point me in the right direction, I am having serious issues trying to root my 1952-1.
I followed the guide in this post to install TWRP
https://forum.xda-developers.com/g7-play/how-to/how-to-successfully-install-twrp-g7-play-t3979701
I followed all the guidelines but when i tried rebooting to recovery I ended up in having TWRP splash screen bootlooping, but was still able to fastboot boot twrp.
I then flashed Magisk, it completed and then i booted the phone back up, no magisk was in the app drawer. So i installed the Magisk Manager apk and this told me I was not rooted. Repeated the whole thing and still the same result.
I have also tried patching the boot.img file using magisk but same as before the phone is not rooted, on top of this I have also clean flashed the stock rom but again still not rooted.
Anyone got any ideas ?

Yeah the rooting process can be a little bit frustrating. You will have to copy the original boot.img file to your phone. In the magisk app make sure you enable recovery mode. Then you can patch the boot.img file. Copy it back to your computer and flash it via fastboot. But there is a catch. The phone will be rooted only if you boot the phone through recovery.

Question Can't Root After May Update?

I was rooted with Magisk on the April build and attempted to update to May. So I used Magisk to uninstall, accepted the OTA, then used Magisk to reinstall (before rebooting) but I got an error about the phone being corrupt,. So I've spent the past several hours flashing the stock boot image to both boot slots, creating new Magisk patched images, flashing those to both boot slots, rebooting, and flashing stock boot images again to both boot slots. I've done every combination of flashing stock to one boot slot and patched to another, patched to both slots, and now stock to both slots. Any time I try to boot a patched boot image the phone reboots a few times and finally tells me it's corrupt and asks to reset it (which I haven't done and prefer not to do).
I can confirm that I'm on the May update and that I'm using the May boot image in my attempts to root again. At this point, I've wiped the Magisk app (thinking a module could be causing the issue when I root) and I'm back on the stock boot image and the phone seems to be working fine, just without root.
I feel like I'm missing something simple. Can someone point me in the right direction?

I stopped to update ROM with this method since march because i had always a bootloop.
Now i install the update by android flash tool and flash boot patched with fastboot command.
You could do it. I hope Twrp wil be released quickly.

Vincent_40 said:
I stopped to update ROM with this method since march because i had always a bootloop.
Now i install the update by android flash tool and flash boot patched with fastboot command.
You could do it. I hope Twrp wil be released quickly.
Click to expand...
Click to collapse
I successfully updated to May and I've flashed the patched boot image in fastboot at least a dozen times (stock to patched, different partitions, patched to stock). The phone won't boot whenever I flash the patched image. It just bootloops and eventually gives me an error about being corrupt and asks if I want to factory reset.

Flash your patched image, then boot to safe mode, then reboot. It should work. I had the same issue and it ended up being something I had in Magisk, even though I had everything disabled. I ended up uninstalling everything in Magisk, and reinstalling.

shiftr182 said:
Flash your patched image, then boot to safe mode, then reboot. It should work. I had the same issue and it ended up being something I had in Magisk, even though I had everything disabled. I ended up uninstalling everything in Magisk, and reinstalling.
Click to expand...
Click to collapse
And if this doesn't work you might have to wipe your phone and re-flash the appropriate build. I remember seeing posts in the past with users discussing a wipe and re-flash resolving the "phone is corrupt" issue.

shiftr182 said:
Flash your patched image, then boot to safe mode, then reboot. It should work. I had the same issue and it ended up being something I had in Magisk, even though I had everything disabled. I ended up uninstalling everything in Magisk, and reinstalling.
Click to expand...
Click to collapse
I wiped data in Magisk since I can't access the modules to disable them right now (no root) and I also wiped data in Rice Tweaks since it was one of the mods I was using. I'll try this tonight and see if it works.

joshw0000 said:
I wiped data in Magisk since I can't access the modules to disable them right now (no root) and I also wiped data in Rice Tweaks since it was one of the mods I was using. I'll try this tonight and see if it works.
Click to expand...
Click to collapse
Before you wipe everything try this:
** ALSO: booting into safe mode automatically disables all Magisk modules **
How I root and update (which is identical whether rooting the first time or updating):
Use the latest Magisk Stable (in my case, I keep the app "hidden" / renamed)
Used the full firmware zip, extracted to the same folder as the latest Platform Tools (S:\platform-tools)
Extracted the new boot.img
Copied new boot.img to the phone
Patched the new boot.img with Magisk Stable
Renamed Magisk'd boot.img so I know what version of firmware it's for
Copied the Magisk'd boot.img back to the computer
Disabled all my Magisk Modules
Removed the "-w " from the flash-all.bat
Re-edited the flash-all.bat to verify I saved it with the "-w " taken out
Open a Command Prompt, navigated to S:\platform-tools
adb reboot bootloader
flash-all.bat
Let phone boot, unlock it, check that it's working, allow the update process to finish (gave it five minutes or so)
adb reboot bootloader
fastboot flash boot kernel.img (renamed Magisk'd boot.img)
fastboot reboot
Unlock, check everything's working
Re-enabled the most basic Magisk Modules which I was sure wouldn't cause a critical issue
Reboot, unlock, made sure everything's working
Back to modding!
Click to expand...
Click to collapse
From here:
https://forum.xda-developers.com/t/...central-repository-of-relevant-links.4352027/

biTToe said:
Before you wipe everything try this:
** ALSO: booting into safe mode automatically disables all Magisk modules **
How I root and update (which is identical whether rooting the first time or updating):
From here:
https://forum.xda-developers.com/t/...central-repository-of-relevant-links.4352027/
Click to expand...
Click to collapse
Thanks. Do you know if I can run the flash-all.bat if I'm already on the current update? I have the full firmware on my PC (so I could get the boot image).
It sounds like booting to safe mode is the one thing I haven't tried.
When I updated last night I tried to disable Magisk from within the app but Magisk didn't have a backup (because I had rooted on the April build from fastboot) so I flashed the factory April boot.img, then fastboot boot magisk-boot.img, then allowed Magisk to root my phone. Then disabled all the modules, unrooted with Magisk, accepted the OTA which took unusually long to install (2+ hours), then used Magisk to restore root but I think I forgot to tell it to do the inactive partition which may have cause all of my issues. When I rebooted it gave me the corrupt error.
From there I spent a bunch of time fastboot flashing and fastboot booting the stock and modified May boot images. I've got about 4 copies of the modified boot image where I kept recreating it hoping it'd work again.
Tonight I'll try to flash the modified boot.img and boot directly into safe mode to see if I can get it to load. I may also try wiping cache in recovery to see if that helps.

joshw0000 said:
Thanks. Do you know if I can run the flash-all.bat if I'm already on the current update? I have the full firmware on my PC (so I could get the boot image).
Click to expand...
Click to collapse
YES you can.
Just make sure to edit the flash-all.bat and remove -w
otherwise you WILL wipe.
THEN... after you save the edited flash-all.bat, edit it again to make sure the -w is in fact not there.
Ive been where you are before. I forgot to disable a mod and boot-looped.
I booted to safe mode then re-flashed with flash-all, patched the boot.img and flashed that via Magisk and I was golden.
I always use this method. I even went from 12-beta to 12.1 w/o so much as a hiccup.
OTA can be problematic (or has been for me in the past). this is simple, quick, and works every time.
My suggestion is to start from scratch: delete all those previously used/attempted files -especially the patched image.
d/l the new factory image, extract/patch that boot.img This way you know everything is from the same place.
cheers

Thanks guys for all the help. Safe Mode is going to work for me. I was able to root, boot to safe mode, and reboot normal. I'm slowly enabling modules until it errors again and I've found that Renovate Ice was the culprit. But whenever it errors, I can just boot to safe mode, reboot, and start fresh with modules. Thanks!

OnePlus 7T India, 11.0.9.1, booting only to recovery / fastboot after incorrect Magisk update

I have OnePlus7T Indian version. I was on 11.0.9.1 and rooted with Magisk Canary version. There was an Update to Magisk which I accidentally installed with OTA option instead of full. Now my phone is not booting. It goes into original recovery mode or fastboot only. How can I recover from this? I tried to flash the magisk patched image file and it shows as flashed but when I reboot I again reach original recovery / fastboot menu only. Please help!!

Problem solved but don't know how. I was trying many things and when I used Tool All in One to flash TWRP the phone rebooted into the system. Not even sure if TWRP is installed or not but everything is working now and phone is rooted. Not sure how it got resolved. Magisk is updated to latest version.

jesrani said:
Problem solved but don't know how. I was trying many things and when I used Tool All in One to flash TWRP the phone rebooted into the system. Not even sure if TWRP is installed or not but everything is working now and phone is rooted. Not sure how it got resolved. Magisk is updated to latest version.
Click to expand...
Click to collapse
Most likely changed slot accidentally when it crashed and then corrected on multiple interventions

HueyT said:
Most likely changed slot accidentally when it crashed and then corrected on multiple interventions
Click to expand...
Click to collapse
Hi. I am again having same problem. I updated Magisk Manager and Magisk and some other apps and phone was not booting. After many tries it again booted but all the modules in Magisk were off. So I switched them on and rebooted the phone and now it is just not booting. I tried to use Tool All In One to flash a TWRP but now there is no recovery. The phone is either not booting (stuck on Circle dot rotating) or just going into fastboot, does not go into recovery. I was on OOS11. I tried flashing original recovery through the tool but it fails. Any way out of this mess??

jesrani said:
Hi. I am again having same problem. I updated Magisk Manager and Magisk and some other apps and phone was not booting. After many tries it again booted but all the modules in Magisk were off. So I switched them on and rebooted the phone and now it is just not booting. I tried to use Tool All In One to flash a TWRP but now there is no recovery. The phone is either not booting (stuck on Circle dot rotating) or just going into fastboot, does not go into recovery. I was on OOS11. I tried flashing original recovery through the tool but it fails. Any way out of this mess??
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
This will wipe your data. Otherwise, you can try manually fastboot flash each individual files of oos11 rom:
⭐[ROM][STOCK] 11.0.9.1-GLOBAL-OnePlus7TOxygen_14.O.35_GLO_0350_2206171459-FASTBOOT
Created my own FASTBOOT Rom can anybody test this out, to see if it works please? Used to "Restore the Firmware" on your phone or when bricked you cannot downgrade or upgrade with FASTBOOT Roms, you must be on the same (Firmware Update Global...
forum.xda-developers.com

HueyT said:
This will wipe your data. Otherwise, you can try manually fastboot flash each individual files of oos11 rom:
Click to expand...
Click to collapse
Thanks. I managed to boot the phone but having root problems. After spending a number of hours doing various trials and checking Xda threads I managed to get it to boot again but root was lost.
I again read more articles and learnt that I have to flash recovery to both partitions so I used Tool All in one, changed active slots and flashed the magisk patched image from this thread i think on both slots. But i am not sure. I managed to get root but the Magisk manager was not getting installed.
I tried few other things and finally i am now not able to root again. Phone is booting after I flash a recovery but I am not sure if it will boot if restarted or go into loop.
Can anyone explain the proper procedure and sequence to follow for rooting and which files to use.
I am on OOS11.09.1

jesrani said:
Thanks. I managed to boot the phone but having root problems. After spending a number of hours doing various trials and checking Xda threads I managed to get it to boot again but root was lost.
I again read more articles and learnt that I have to flash recovery to both partitions so I used Tool All in one, changed active slots and flashed the magisk patched image from this thread i think on both slots. But i am not sure. I managed to get root but the Magisk manager was not getting installed.
I tried few other things and finally i am now not able to root again. Phone is booting after I flash a recovery but I am not sure if it will boot if restarted or go into loop.
Can anyone explain the proper procedure and sequence to follow for rooting and which files to use.
I am on OOS11.09.1
Click to expand...
Click to collapse
[OP7T][Stock/Magisk v23.0] OxygenOS 11.0.9.1.HD65AA boot.img
OnePlus 7T OxygenOS 11.0.9.1.HD65AA Global boot.img Stock: https://mega.nz/file/CV9B2I5A#kIjb0ST0XvAn1yJTMi56hdz1asi-d_LH0uaOCcfrA2g Magisk v23.0 Patched: https://mega.nz/file/eFcygLwb#U0m48VlQekyhrKAEC3Oc56yfxdbjGmGhiwgndU-Grwc Note: DISABLE...
forum.xda-developers.com

HueyT said:
[OP7T][Stock/Magisk v23.0] OxygenOS 11.0.9.1.HD65AA boot.img
OnePlus 7T OxygenOS 11.0.9.1.HD65AA Global boot.img Stock: https://mega.nz/file/CV9B2I5A#kIjb0ST0XvAn1yJTMi56hdz1asi-d_LH0uaOCcfrA2g Magisk v23.0 Patched: https://mega.nz/file/eFcygLwb#U0m48VlQekyhrKAEC3Oc56yfxdbjGmGhiwgndU-Grwc Note: DISABLE...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi. I already used these boot images but I was still having a problem. I had flashed the stock image to both partitions and then the Magisk patched image also but either I was not rooted or Magisk App not working. Finally got things to work by installing TWRP to partition a I believe. I changed active partition to a and then flashed the twrp recovery. Again changed active to b and booted and had root. I had to install Magisk Canary 25210 version only as other versions did not install. After checking on net it seems this version is faulty. So I installed Magisk Delta, then installed Magisk using Direct Install option, rebooted, checked regular Magisk Manager and showed the same Magisk version. Removed all modules from old Magisk Manager and unstalled the app. Setup Magisk Delta modules, hide, SuList as well as apps like LSPosed, HMA etc and now everything is working again.
I still am not very sure where the recovery is installed, on partition a or b? And if a difference recovery is installed on each partition what happens? I am pretty sure I had not installed TWRP on partition b. I am also assuming that once I set a partition as active and flash a recovery in fastboot that recovery is flashed to that partition, is this correct? Things are working but I don't know if the phone will go to recovery mode from system, I have not tried that. So I am not very clear yet but still got things to work.

jesrani said:
Hi. I already used these boot images but I was still having a problem. I had flashed the stock image to both partitions and then the Magisk patched image also but either I was not rooted or Magisk App not working. Finally got things to work by installing TWRP to partition a I believe. I changed active partition to a and then flashed the twrp recovery. Again changed active to b and booted and had root. I had to install Magisk Canary 25210 version only as other versions did not install. After checking on net it seems this version is faulty. So I installed Magisk Delta, then installed Magisk using Direct Install option, rebooted, checked regular Magisk Manager and showed the same Magisk version. Removed all modules from old Magisk Manager and unstalled the app. Setup Magisk Delta modules, hide, SuList as well as apps like LSPosed, HMA etc and now everything is working again.
I still am not very sure where the recovery is installed, on partition a or b? And if a difference recovery is installed on each partition what happens? I am pretty sure I had not installed TWRP on partition b. I am also assuming that once I set a partition as active and flash a recovery in fastboot that recovery is flashed to that partition, is this correct? Things are working but I don't know if the phone will go to recovery mode from system, I have not tried that. So I am not very clear yet but still got things to work
Click to expand...
Click to collapse

Only data partition is shared. All else have both A and B parts