Related
Alright I'm finally going to throw a post up, go ahead and get all your "use search" "it's on search" "it was in a thread" out of the way now, cause I've gone through 76 thread pages of reading and searches and I can't find an answer that works.
I am continually getting the ERROR 262 in RUU everytime I attempt to use it to flash.
- I am running Vista 64bit (not sure if that is the problem or not)
- Using WMDC 6.1
- I have uninstalled and reinstalled WMDC 6.1 a total of 7 times
- I have used every single USB port on my computer.
- I have restarted a total of 15 times, both the computer and hard resets of the phone.
- I have tried both the Unlocker (I'm not sure if I have to unlock a second time or not after my WM 6.1 update) and just the ROM Update.
- I have tried doing the forced bootloader mode (Power+Camera+Reset) and simply allowing the program to do it on it's own.
Everytime it drops into Bootloader (3 color) mode, it drops Activesync and then obviously errors out because of lost connection. I've tried simply running the program and never unplugging the USB cable, I've also tried unplugging the USB cable when the DOSprompt part of the batch tells me to. Everything I've read says to do this, but I don't remember doing this for the 6.1 WM Update. It also doesn't make sense.... if you unplug the device, it's going to drop activesync everytime....
I've just updated every program, reinstalled everything more then 5 times, done countless resets, tried every USB plug and nothing is working. Hopefully this is something easy I'm just overlooking -- or something easy like "It doesn't work with Vista 64" so I can at least get an answer.
Again, I apologize if this was answered somewhere previously. I genuinely tried for 3 hours using search, on and off XDA, so that I wouldn't have to post a question thread but never found a "fix" that worked.
Thanks in advance.
Traumatique said:
Alright I'm finally going to throw a post up, go ahead and get all your "use search" "it's on search" "it was in a thread" out of the way now, cause I've gone through 76 thread pages of reading and searches and I can't find an answer that works.
I am continually getting the ERROR 262 in RUU everytime I attempt to use it to flash.
- I am running Vista 64bit (not sure if that is the problem or not)
- Using WMDC 6.1
- I have uninstalled and reinstalled WMDC 6.1 a total of 7 times
- I have used every single USB port on my computer.
- I have restarted a total of 15 times, both the computer and hard resets of the phone.
- I have tried both the Unlocker (I'm not sure if I have to unlock a second time or not after my WM 6.1 update) and just the ROM Update.
- I have tried doing the forced bootloader mode (Power+Camera+Reset) and simply allowing the program to do it on it's own.
Everytime it drops into Bootloader (3 color) mode, it drops Activesync and then obviously errors out because of lost connection. I've tried simply running the program and never unplugging the USB cable, I've also tried unplugging the USB cable when the DOSprompt part of the batch tells me to. Everything I've read says to do this, but I don't remember doing this for the 6.1 WM Update. It also doesn't make sense.... if you unplug the device, it's going to drop activesync everytime....
I've just updated every program, reinstalled everything more then 5 times, done countless resets, tried every USB plug and nothing is working. Hopefully this is something easy I'm just overlooking -- or something easy like "It doesn't work with Vista 64" so I can at least get an answer.
Again, I apologize if this was answered somewhere previously. I genuinely tried for 3 hours using search, on and off XDA, so that I wouldn't have to post a question thread but never found a "fix" that worked.
Thanks in advance.
Click to expand...
Click to collapse
Try another computer. It does work with Vista 64 (I've done it many times), but there's no point in beating your head against the wall for this. There are so many things that it could be you might as well try another computer so that you at least now it is the computer and not your Vogue.
-GT
You phone is not unlocked and you are trying to flash a custom ROM.
Try following the instructions in this thread found about halfway down the first page of the forum.
http://forum.xda-developers.com/showthread.php?t=508544
atoz350 said:
You phone is not unlocked and you are trying to flash a custom ROM.
Try following the instructions in this thread found about halfway down the first page of the forum.
http://forum.xda-developers.com/showthread.php?t=508544
Click to expand...
Click to collapse
Be it locked or unlocked is beside the point. As I stated before, I unlocked it once for the WM 6.1 upgrade and being as I wasn't sure if I had to do it again, I attempted to do it again.
Regardless of if it's trying to flash the ROM, or use the Unlocker, the same thing always happens. Windows Mobile Device Center (ActiveSync) drops connection once the phone goes to the Bootloader (3 color screen), and it errors out 262 (Connection Lost).
I have attempted to give as much information as possible so I can get input on if I'm missing a step or if it's simple bugging out. I will try what gt! suggested and attempt this on a different computer. However, from the information I've given can anyone confirm that I'm at least doing the correct steps -- there's just some gremlin popping up keeping me from completing it?
Thanks again.
Flash via SD card. There are instructions in CodyBear's FAQ thread.
From experience...use a blank or backed up card.
Traumatique said:
Be it locked or unlocked is beside the point. As I stated before, I unlocked it once for the WM 6.1 upgrade and being as I wasn't sure if I had to do it again, I attempted to do it again.
Regardless of if it's trying to flash the ROM, or use the Unlocker, the same thing always happens. Windows Mobile Device Center (ActiveSync) drops connection once the phone goes to the Bootloader (3 color screen), and it errors out 262 (Connection Lost).
I have attempted to give as much information as possible so I can get input on if I'm missing a step or if it's simple bugging out. I will try what gt! suggested and attempt this on a different computer. However, from the information I've given can anyone confirm that I'm at least doing the correct steps -- there's just some gremlin popping up keeping me from completing it?
Thanks again.
Click to expand...
Click to collapse
CONNECTION DROPS BUT............ it should be installing new drivers.
When i flash my phone on windows 7 it loses connection when it enter bootloader just like you.
And by the time the drivers for the qualcomm chip on my htc touch vogue gets installed (this is the recognized driver when your phone is in bootloader)
the RUU rom updater/installer times out.
After it times out for me i make sure that the driver for the qualcomm chip (the driver that is seen by windows when your phone is in bootloader) is installed, i run the updater again.
Now it should run through smoothly again.
Alternate method:
Flash by ur sd card.
or
Try a different computer.
start it up on serial mode then plug it in to USB, go to device manager make it search for new devices. Driver should start loading and start RRU, if all else fails use the SD CARD for The Flash
Alright, well now I guess a second question looms. I was going to take everyones advice and attempt to flash with the MicroSD Card, but now I'm having problems with that one as well.
Yes it has to be 2GB or less and formatted FAT32
I always find my original 512MB works perfect for flashing from
as to how to get it to your card...
Extract the ROM you want to use
Find the largest *.NBH file and copy it to your desktop
at the desktop rename it to VOGUIMG.NBH (I believe the caps in naming is important)
Copy that file to the root of your formatted FAT32 2GB or less SD Card
enter bootloader mode and it should go from there.
Click to expand...
Click to collapse
Those are the directions on the FAQ. I have the original 512mb card, formated to FAT32. I went into the Unlocker RAR, found the Voguimg2.nbh, renamed it to VOGUIMG.NBH as instructed in the FAQ. Placed the file on the freshly formatted MicroSD Card, put it in the phone and went to bootloader mode and... nothing.
I attempted putting the card in, then going to Bootloader. I tried going to bootloader, then putting in the card. I tried putting it from USB to Serial and vica versa. Tried hitting all the buttons. Nothing happens, it just hangs out on the 3 Color Screen.
Am I missing something, or am I just cursed to not flash my phone more then once? Heh. Thanks again for all the help.
[EDIT] For clarification, since I don't know if I have to unlock before every flash or not, I'm just attempting to unlock it again and hense only using the Unlocker ROM. It was previously flashed for the 6.1 update, but I figured it couldn't hurt to try the unlocker again so that's been the ROM I've been trying to run currently.
Traumatique said:
Alright, well now I guess a second question looms. I was going to take everyones advice and attempt to flash with the MicroSD Card, but now I'm having problems with that one as well.
Those are the directions on the FAQ. I have the original 512mb card, formated to FAT32. I went into the Unlocker RAR, found the Voguimg2.nbh, renamed it to VOGUIMG.NBH as instructed in the FAQ. Placed the file on the freshly formatted MicroSD Card, put it in the phone and went to bootloader mode and... nothing.
I attempted putting the card in, then going to Bootloader. I tried going to bootloader, then putting in the card. I tried putting it from USB to Serial and vica versa. Tried hitting all the buttons. Nothing happens, it just hangs out on the 3 Color Screen.
Am I missing something, or am I just cursed to not flash my phone more then once? Heh. Thanks again for all the help.
[EDIT] For clarification, since I don't know if I have to unlock before every flash or not, I'm just attempting to unlock it again and hense only using the Unlocker ROM. It was previously flashed for the 6.1 update, but I figured it couldn't hurt to try the unlocker again so that's been the ROM I've been trying to run currently.
Click to expand...
Click to collapse
As explained in Cody's FAQ, once your phone is unlocked to flash, it stays unlocked. The only thing you MIGHT want to do other than just flash the new ROM is to flash a stock ROM, then the new ROM.
Go ahead and try putting the VOGUIMG.NBH from the ROM on the card and see what happens. From what I remember, you should have the card in the phone then put it into boot mode. I believe that was what I did for my first flash ever.
What method did you follow when you flashed to 6.1? Has anything changed about what you are doing now?
Also it might be important to know that when flashing via USB on a 64-bit machine the RUU program will give you an error about not working on a 64-bit computer. Just ignore the error and click ok, it will pop up a few times just keep hitting ok and it will work. That error pops up even though it's false.
when i first tried flashing a custom rom, i extracted the downloaded file and when i clicked on the ruu i had the same error... i then tried just running the downloaded file without extraction and it worked fine.
same thing happend 2 me Just run the RUU do not extract files!!!!!!!((-;
Barogi44, JFive1182 -- You are both princes among men.
The Unlocker will only run on the first auto-extract of the file. You cannot run the batch from the extraction folder afterwards, eventhough all it does is auto-extract the contents and then auto-run the batch file.
Out of curiosity... and being infuriated I went and tested this again just to see. On 3 other computers the same thing happened. I have no clue why it would bug out that way... or if it was written that way that's a pretty bad design.
In any case, someone should put that in the FAQ. You have to let it start the process from the auto-decompressing RAR, you can't start it again after the fact by running the batch file from the extracted folder. If it said this anywhere, the 3 guides I read never mentioned that (nore the unlocker's thread at ppcgeeks) so I didn't catch it.
Thanks again for everyone's input, and obviously JFive1182 & Barogi44 for actually letting me know how to make it work!
your welcome
Traumatique said:
[..]The Unlocker will only run on the first auto-extract of the file.
[...]someone should put that in the FAQ. You have to let it start the process from the auto-decompressing RAR, you can't start it again after the fact by running the batch file from the extracted folder. If it said this anywhere, the 3 guides I read never mentioned that (nore the unlocker's thread at ppcgeeks) so I didn't catch it.[..]
Click to expand...
Click to collapse
Bump for emphasis. I had the same problem.
Tutorial said this: "Use WinRAR and extract both the files into separate folders,"
ONLY extract the NFSFAN rar.
Hi all!!
Ever since I got my Sprint Vogue, I have spent God only knows how many hours looking for and gathering information regarding this phone (flashing instructions, unlocking, SuperCID, etc). There are a few sites that have fairly comprehensive guides as to how to do this, but there are very few posts in the Vogue Section here at XDA-Developers.
Having said that, I figured I would create my own "How to Flash Your Vogue"-Thread. This is a multi-step process and I cannot emphasize the importance of following every step down to the "T", that is unless you are looking for a silicone-skinned brick...
Who is this guide for?
*Anyone with a CDMA version of the Touch. [highlight]That means no GSM[/highlight]
*Noobs and Seniors alike.
*People who have trouble flashing their devices.
*Anyone looking for links to more information.
*Curious people in general.
*Anyone willing to get rid of the nasty stock rom and looking for a newer and cleaner OS (notice that I never said more stable, so do not blame me afterwards ).
[highlight]Please keep in mind that there is always a chance of bricking your device with these procedures. I will not be in any way, shape, or form responsible if you damage your device while doing this.[/highlight]
Got your coffee? Alright, let's do this.
Step 1. Preparing the device
As with every phone, you have to make sure that you have the following things done before flashing:
* Battery charged at least 50%.
* All the necessary programs (see next post).
* Instructions handy.
Make sure that you back up all your information (contacts, e-mails, files).... essentially, anything that you would like to keep post-flashing. You can do this via Active Sync/Mobile Device Center or via third party software (PIM Backup is really good)...
You will have to reinstall every last piece of software in your device as it will be hard reset. Some programs may work if installed in a SD card directly, but a lot of them write things to the registry and copy files to the device, which they require to run. Long story short, keep all your cabs and exe files in a safe place so you can restore later if needed.
Step 2. Unlocking the Device (HardSPL)
Unlocking the device is done so that you can flash custom roms in your devices. The unlocker that you are about to download and use was provided by "ImCoKeMaN" at PPCGeeks. If you are interested in the full thread, please click here.
If you have read the above link, you will see two versions of the HardSPL (0.40 and 2.31). Simply use 2.31 as it works fine with most devices.
[highlight]To use this under Windows XP,[/highlight]
1. Connect your device to your computer and make sure it is synced with ActiveSync.
2. Download and extract the contents of the zip file, which is an exe. Let it run to completion. You will be prompted to disconnect and reconnect your device at one point in the process. Do it... don't worry
3. It will look like it is flashing a rom via a RUU. Do not disconnect the device after it is done!!!!!
4. Once it is done flashing, you will see a prompt that says that it will run exitbl. DO NOT DISCONNECT YOUR DEVICE. At this point, open ActiveSync, go to File>Connection Settings> Uncheck "Allow USB Connections". Continue following the on screen instructions and let it finish.
5. Go to bootloader once more to verify that it worked. You should see 2.31 CoKe MFG.
[highlight]To use this under Windows Vista/7 x64 (thanks jitajt),[/highlight]
jitajt said:
connect your device to WMDC (it's not necessary to set up device, just connect without setting up device)
then right click on the 2.31 unlocker and run as administrator
follow the directions, you will get an error about sleep.exe not being compatible with x64 but just hit ok and continue, (you will get about 10 of them)
then just keep following the directions in the command prompt and it will put your phone into bootloader then you have to disconnect and reconnect when it tells you to. and it will flash your phone and reset it. then your done you can close the command prompt and disconnect your phone.
I did it just like above and I have not had any problems.
Do this at your own risk as I am not responsible for your phone
Click to expand...
Click to collapse
Step 3. Flashing your Roms
The time has finally arrived. You sat down patiently through the unlocker and you are now ready to take the leap of faith into what you believe will bring your device to a new level of usefulness (also known as getting rid of that nasty, bloated, stock rom )
The process is relatively simple:
1. Download the RUU package from this post. I am only posting this because some cooks only post the rom nbh files rather than the whole package.
2. Go into the threads and look for whichever rom you prefer. Look at my signature to learn which one I am using. NFSFan (my current one) is by far the best one I have tried so far. You can download it from here
3. Put your device in bootloader mode and connect the device to the computer. [highlight]Once in bootloader, activesync will NOT see the device. If the RUU gives a connection error, try to run it with the devices in regular mode (with ActiveSync connected)[/highlight]
4. Open the Romupdateutility.exe and follow the steps.
5. Once it is done flashing the rom, disconnect it from the computer and hard reset it. To do this, simply hold "Send" + "End Call" +Stylus in the reset hole for about 3 seconds. It will prompt you to erase all the data and restore to factory defaults. Press "Enter", which is the center button in the directional pad. Once it is done, press "Send" to reboot.
Congratulations, you just flashed your first rom for Vogue
Step 4. SuperCID
This step can be skipped if you are not thinking of doing anything as far as your radio (such as flashing radios other than the ones intended for Vogue). This is also used to do other things such as modifying certain important things on your device such as the NV files, which is information that will not be discussed here. However, if you are interested in finding out more, simply google it, there is a ton of information out there.
Anyways, back to SuperCID... here is the procedure (thanks to hpnasik at mobile-files.com for the post)
1. Download the following special rom . This is an Alltel rom with radio 3.37. This was specially prepared to be able to reduce the Security Level of the device to level zero.
2. Download mtty since you will need it. Do not worry if you do not how to use it. You will have a step by step in this guide.
3. Flash the Alltel rom from above.
Now comes the fun part...
4. Disable USB in Connection Settings of Active Sync
5. Boot The Phone holding power button and camera button to enter bootloader.
6. Phone Will Display Serial in Bottom
7. Connect Phone to PC
8. Phone should Display USB instead of Serial in Bottom
9. start mtty.exe
10. Select All Default and Connect to USB in drop down box and Shoot the Following Commands (All Commands are case Sensitive)
11. run command rtask a : After this Command Phone will not Display any thing
12. run command echo_on : even though nothing is shown to screen
13. run command readCID : in Sprint it will display SPCS_001
14. run command writeCID 00000000 : Set CID Value to 00000000 replaces SPCS_001 in Sprint (This make PPC Radio Security Level to Zero)
15. run command readCID : This will Display the Update CID as 00000000
16. run Command retuoR : This will return to Original Boot Loader State
Congratulations, you just SuperCIDed your device. Original thread with the instructions can be found here if you are interested.
Step 5. Flashing your radio.
Now that your device has been SuperCIDed, you will have the opportunity to flash radios that have been ported to this device (ie. there is a version of the 3.42.40 radio for the Titan, which has been ported to the Vogue). There are two ways of doing this:
Way 1: Do it by flashing via RUU (same as with flashing a rom)
Way 2: Flash via microSD card. Simply put whichever radio that you wish to flash in the root of a 2GB or less microSD card formatted to fat32. Rename the radio to VOGUIMG.NBH and put your device in bootloader. The flashing will start by itself.
Way 3 (I know I said two ways...): There are a few stock roms that come with new radios. One of them can be downloaded directly from HTC and it is for the Sprint Touch. This one comes with Radio 3.42.30
The other one is for Bell Mobility and this one comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options seem much easier?? I have run into the problem where my device would not let me flash other radios than the one that I had. SD card method did not work and the RUU started out fine but quits at 8% rebooting my phone and displaying Error 328 in the RUU on the PC. Anyway, here are the links...
Sprint rom with radio 3.42.30
Bell rom with radio 3.42.50
Verizon Stock Rom
All Shipped Roms (All Carriers) - Thanks conflipper!
All Above Radios zipped
The newer radios perform a little better and give out better GPS signal (faster locks)....
Hang on a sec... did you just say GPS?!?!? But my Vogue does not have a GPS.... It does, just read a little further and be happy
Step 6. Enabling GPS, Returning to Stock, and Carrier Cabs
As I said before, there is a GPS hidden on your device. Now, if you are like me and went straight to the specs of the phone to confirm, you will probably try to call BS on this. Long story short, there are a few custom roms which have this "tweak" already implemented (like the one I am using from NFSFan). If you require some more info, I will post it later...
[highlight]Location must be on or else your GPS will not work. To activate it, go to Settings>Personal>Phone and change the Location setting to ON instead of 911 (thanks for pointing it out, th3lolz)[/highlight]
[highlight]For Verizon Users[/highlight]
br125 said:
For those of you with the official mr1 update from verizon that cannot get their gps working:
My xv6900 came with the official update and I got it working, it involves downgrading to a NON-GPS radio, then back to a gps radio...
go here: http://forum.xda-developers.com/showthread.php?t=533639
now the instructions are going to imply that you must load the unlocker before each flash... bs don't worry about that
1. flash the .40 unlocker
2. flash the non-gps rom (reset before customization)
3. flash the 2.31 unlocker
4. flash the vzw rom (reset before customization)
5. flash any custom rom or android rom
that's it, time consuming, but it works
*ignore the multiple flashing instructions, its completely unnecessary, I've never flashed more than once with no problem ever....
I also suggest keeping the vzw radio, but do as you will, I like the 3.37.38 radio.. ain't broke don't fix it
lastly, just make sure you RESET BEFORE THE CUSTOMIZATIONS RUN...... that is what locks your gps.
good luck!
ps. the verizon radio rom that is in that post is for the "leaked" 3.37.37 radio, I reccomend using the official update from verizon here for the 3.37.38 radio rom instead:
http://www.pcdphones.com/phone_downloads.aspx?bid=95&cid=1&mid=302&carrier=Verizon Wireless
RESET BEFORE CUSTOMIZATIONS
Click to expand...
Click to collapse
[highlight]How to Relock you phone[/highlight]
If, for whatever reason you need to return your phone for repair/replacement, you will need to relock it. To relock your phone, simply run the unlocker 0.40 and flash the stock rom of your carrier.
ftp://up.ppcgeeks.com/Vogue/Users/ImCoKeMaN/Vogue_unlocker.exe
[highlight]Carrier Cabs[/highlight]
Thanks to Codybear for gathering all of the cabs with settings for various carriers. But since the link went down, here is another one courtesy of LMiller1708
https://sites.google.com/site/vogueroms/vogue-files
This information was only gathered by me and I take no credit whatsoever other than trying to put it in a one stop thread. Thanks to the following people
Shadowmite
ImCoKeMaN
mindfrost
NFSFAN
Codybear
joshkoss
and a bunch of people that were involved in developing all this...
Thread sticky'd as requested
Peace,
Josh
ok so im a noob n all at this but for some reason when i go to start the Vogue unlocker it tells me to connect my phone, when its already connected. Ive tried everything my even switched to an xp from vista but still no luck. Please help
dwigginstm said:
ok so im a noob n all at this but for some reason when i go to start the Vogue unlocker it tells me to connect my phone, when its already connected. Ive tried everything my even switched to an xp from vista but still no luck. Please help
Click to expand...
Click to collapse
How exciting!! My first victi...erh patient
Did you put the device in bootloader mode? If you did and it is connected to the PC, you should see USB on the screen of your device. Also, do you have ActiveSync on your XP machine? You will need it for the drivers on this step. Changing USB ports sometimes help as well. And one last thing, do not use a USB hub, go directly through the USB ports in your computer. Good luck!
yes i have activesync installed xp, and yes it changes from serial to usb in bootloader mode. But once i connect it to the pc while in bootloader mode my computer recognizes just activesync doesnt, only when its on and not in bootloader mode will activesync recognize it...
yes i have activesync set up with the phone and pc, but when i put the phone in bootloader mode and connect it the pc recognizes it but not activesync. is there another program i can unlock the phone with?
dwigginstm said:
yes i have activesync installed xp, and yes it changes from serial to usb in bootloader mode. But once i connect it to the pc while in bootloader mode my computer recognizes just activesync doesnt, only when its on and not in bootloader mode will activesync recognize it...
Click to expand...
Click to collapse
Do not worry about ActiveSync. While you are in bootloader, the device is not running WM, which is why your computer only sees it as a USB device. This is perfectly fine. ActiveSync will not recognize it.
Please, follow the instructions in my post for unlocking. Read it thoroughly and try to understand it, else you will end up bricking your device.
ok but when i begin the unlocking exe it tell me to connect the device to activesync, althought the only way activesync will notice it is if i take it out of bootmode. your help is appriciated
dwigginstm said:
ok but when i begin the unlocking exe it tell me to connect the device to activesync, althought the only way activesync will notice it is if i take it out of bootmode. your help is appriciated
Click to expand...
Click to collapse
that is a message in the RUU. do not pay attention to it. good luck...
so i finally got the unlocker to start and it begins the ten minute process and stops then show a 262 error code ive done this over and over again
Let's go from the top. I just saw the message that you were talking about. The unlocker does ask for ActiveSync as you pointed out and it is asking you to connect the device to the computer. Then it asks for you to press any key when that is done. So, try that and you should see the word "initializing" with a dotted line getting longer for about 20 seconds. Do that.
The RUU will start up afterwards. The prompt will tell you that it is going to flash a new SPL, and if I am not mistaken that is where you are getting stuck.
Just out of curiosity, which version of the Vogue do you have? (Alltel, Bell, Verizon, Sprint, US Cellular)?
no internet
i just flashes my cell for the first time in with sprint NFSFAN's WM6.5 1.00 FINAL ROM worked great but for some reason my internet doesnt work i downloaded NFSFAN Sprint Provisioning but i dont know how to use it. It has a cople files SPRINT~1.000 and 000DUMMY and setup.xls
thanks in advance
terrancextc said:
i just flashes my cell for the first time in with sprint NFSFAN's WM6.5 1.00 FINAL ROM worked great but for some reason my internet doesnt work i downloaded NFSFAN Sprint Provisioning but i dont know how to use it. It has a cople files SPRINT~1.000 and 000DUMMY and setup.xls
thanks in advance
Click to expand...
Click to collapse
You downloaded a cab. Simply put it in your SD card and run it by tapping on it. Don't unzip it...
Unlocker is not 64 bit compatible... grrr....
It's very strange As it seems to be recognized by the computer but is not found by the AIO 1.13 batch file , I've never used Odin as all I've done is to root and install the SDX Remover. I am able to transfer files to and from my SD Card. I've tried numerous USB Cables including the one which initially allowed me to root, it's the only one of all of my many cables which allows windows to recognize the device and transfer files at usb 2.0 speeds all others either fail recognition or tell me to find a faster port. So I'm at a loss and really, desperately wish to update to froyo. I've tried every tip I've found up to and including shutting down my computer and unplugging it for more than 30 seconds. It's probably something quite simple that I'm overlooking,. I recall having to create a guest account in order to run the batch file and tried that as well. Any tips very much appreciated.
I think I'd like to revert my phone to stock(I think I did a full backup) upgrade to froyo officially than re root or not. I've been way to busy to spend too much time fussing with my phone.
If you are still on stock, which it sounds like you are....just follow the instructions on this post:
http://forum.xda-developers.com/showthread.php?t=963652
since you are already at stock...start from step 11 "download update.zip" and go from there.
Recently got a G3 with Verizon. Running Lollipop 5.0.1. I've done quite a bit of reading about rooting, and understand the concept. Decided to try rooting my phone. I followed the guide here:
http://forum.xda-developers.com/log...de-root-lg-firmwares-kitkat-lollipop-t3056951
I attempted to root my phone several times, on three different PC's each running Windows 7. The farthest I ever get is a 90% complete status where the GUI says "Rooting phone" and the phone says "downloading firmware." I've left it in this state for upwards of 10 minutes and I always end up having to pull the usb and remove the battery in my phone in order to restart it. Upon pulling the USB the GUI will immediately show it had completed the root but when I test for super user status (with Terminal Emulator "su" entry) it says "not found."
USB debugging is enabled. I have tried switching between MTP and PTP connections. I have tried several different USB ports on each machine I attempted this. I tried it by first manually installing the LG drivers on the computer as well as by letting Windows automatically install them. I have tried with the box that says to always allow connections from the computer checked as well as unchecked. I tried versions 1.3 and 1.2 of the script. With version 1.2 it seemed like it finished and it prompted me to push control+c followed by N and enter or something and then the command window closed, but the phone was not rooted.
What am I missing?
I'd really like to get this phone rooted as I am excited to create a recovery and experiment with custom ROM's.
Any ideas are appreciated. Thanks!
The link you provided is to the XDA Forums homepage. The correct link is...
[Guide]LG One Click Root - root LG firmwares (KitKat / Lollipop)
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
The method you'll want to use for LP is located here...
[GUIDE][ROOT] Newest Root Method for LG devices
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
If the 1st method (one-click script) doesn't work for, the 2nd method using the classic way will. Download and extract the "New_LG_Root_v0.1_by_dig.zip" file from the OP, then open an elevated command prompt from within the directory you extracted the files to.
Thanks
I thought I fixed that link. Oh well. Glad to see there's a new method. I will try this. Thanks!
This worked by the way. Thanks again!
Hello Guys
My friend ask me for get a Lineage OS to his H815 with Nougat. I agreed as I made few successful changes from stock to Lineage OS with Samsungs and older LGs (like L3 E400). But G4 is really more complicated, more than I expected . Firstly I wanted to unlock this phone with FWUL, so I download a VirtualBox emulated image with FWUL and after it boots I opened SALT program and it detects the phone. I made a basic backup and then I choosed Unlock G4 (UsU). After that some windows pop up. Last window was a pre-checking, when the bar gets to the end window closed and nothing more was happening. So after almost hour of waiting I just turned off the phone - I thought its all. After that while phone is booting I have those messages in the left top corner:
[820]-----------------------
[870]
[920] Secure boot error!
[970] Error code : 1009
[1020[ OFFICIAL !!
[1070]
[1120]-----------------------
Its booting, but only sometimes its normal boot, most starts are with bootloop, sometimes its start after 10 restarts, sometimes after 2nd restart, sometimes after plug in/plug out USB cable it starts boot normally (connecting cable only to phone, not to PC), sometimes only thing that helps is to take out the battery. I made full wipe to be sure that its not a software problem, but only thing I achived with that is fact that phone has a Nougat and now it have a Marshmallow. It is (was?) H815, but now model name is LGLS991 (?), it gets very long until it shows software version (V20g), IMEI is unknow, even when I type *#06# I get the null response.
I can get into recovery, can put phone into download mode. But i'm not able to do anything to get LOS or a least Nougat.
I've read many, many tutorials how to get G4 working properly after unsuccessful unlock, but nothing helps. What I've tried:
1. Flashing stock Nougat for H815 with LGUP, installed USB drivers, proper DLL, set com to 41, but when I trying to flash, after a 4% i get error: KDZ file is invalid. Downloaded few KDZ firmwares, dont belive that every single one is invalid, there is something wrong with LGUP or with settings, but I cant find what
2. Flashing with LG Flash Tool 2014: tried both normal flash and cse flash and always stoping in the same moment, with "Connection to server failed. Try again in a moment". Read many tutorials about this error, none was helpful in my case.
3. Flashing with LG Flash Tool v1.8.1.1023 and a TOT file, but after select of dll and tot file and press the yellow arrow I get an error: "Failed PreviousLoad()"
Tried all this methods on second computer but without a luck.
What else can I try to get this G4 working properly? Maybe try to install some rom from stock recovery? But which rom will be ok and dont get things worst?
If you need more info dont hesitate to ask. Would be very greatful for any advices .
you definitely didn't read enough... go to read again the UsU thread and as you've read the whole tutorial, you can also read the whole FAQ and the OP, because 90% of what you pointed out in your publication (which incidentally is in the wrong section) is explained there.
A quick advice: Don't try to flash any KDZ/TOT again.