Develop Bugs

How to flash official nougat without wiping internal storage?

Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks

I was the same predicament as you. I finally took the plunge and now I have Nougat running on my OP3. Here is what I did :
Start: OOS 3.2.8 w/ custom kernel and modified TWRP
1. Flash stock recovery (Google for a forum post in the OP3 forums on downloading the stock recovery and flash it through fastboot)
2. Reboot and let 3.2.8 start
3. Download Snap VPN and change the country to Canada. You will be prompted for the system update.
4. Let the update download (~1 GB)
5. Install the update. You may see an error of the installation may fail as your phone is rooted. Ignore and go ahead.
6. The installer will now boot to stock recovery and reboot with Nougat. All settings and apps will be maintained
The only catch is that you may have ext4 instead of f2fs. I am okay with it for now... But your mileage may vary
All the best!

Edit : Nougat running on my op3.

abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
Are you rooted? Are you encrypted? What file systems are you using for your partitions? You're not giving full information. Why is formatting not an option if it'll give you the results you want?

To get to F2fs (I do recommend it)
Take a backup of your Data partition. , copy it to your pc with "adb pull /sdcard/Twrp/whatever".
Now go to Twrp>Wipe>Advanced select data and click on change file system. Change it to F2fs. Now restore your backup (Reader the guide all info is there). Profit!

anshulajain said:
I was the same predicament as you. I finally took the plunge and now I have Nougat running on my OP3. Here is what I did :
Start: OOS 3.2.8 w/ custom kernel and modified TWRP
1. Flash stock recovery (Google for a forum post in the OP3 forums on downloading the stock recovery and flash it through fastboot)
2. Reboot and let 3.2.8 start
3. Download Snap VPN and change the country to Canada. You will be prompted for the system update.
4. Let the update download (~1 GB)
5. Install the update. You may see an error of the installation may fail as your phone is rooted. Ignore and go ahead.
6. The installer will now boot to stock recovery and reboot with Nougat. All settings and apps will be maintained
The only catch is that you may have ext4 instead of f2fs. I am okay with it for now... But your mileage may vary
All the best!
Click to expand...
Click to collapse
I don't have any issues with ext4, infact i do feel ext4 is more stable than f2fs so file system is my last concern. Thanks for your method, but then how did u root again? Installing nougat is fine but what after that? I have read that you can't use modified twrp without formatting internal memory first, as it'll show you the pin issue. Let me know how do you propose a safe method to achieve root.
Renosh said:
Are you rooted? Are you encrypted? What file systems are you using for your partitions? You're not giving full information. Why is formatting not an option if it'll give you the results you want?
Click to expand...
Click to collapse
Yes i am encrypted, rooted, stock OOS 3.2.8 + Franco kernel. Official TWRP(not modified). I am using ext4, never used f2fs at all. The time to backup data and then to restore it all back is the reason formatting is not an "preferred" option for me. I can do it, but i would have to wait until i find enough time to do the whole process. I am in a full time job, so i hope you would understand.
Puddi_Puddin said:
To get to F2fs (I do recommend it)
Take a backup of your Data partition. , copy it to your pc with "adb pull /sdcard/Twrp/whatever".
Now go to Twrp>Wipe>Advanced select data and click on change file system. Change it to F2fs. Now restore your backup (Reader the guide all info is there). Profit!
Click to expand...
Click to collapse
Well this again defeats the purpose of my original question, but thanks mate. I would definitely read the guide if decide to switch to f2fs.

@abhibnl. BTW your encrypted. So the modified TWRP won't work.
How to fix:
Wipe Userdata with Fastboot / fastboot erase UserData
Boot into Twrp modified twrp.
Flash OOS 4.0 flash SuperSU and let it boot
You should be decrypted DO NOT install a boot password since you will be encrypted again.

I haven't rooted my phone again. My only reason to root is to install Adaway to block all ads. With DNS66 and Adguard, I have little incentive to root my stock nougat install.
Edit : I had encryption during 3.2.8 and it carried over to 4.0

Puddi_Puddin said:
@abhibnl. BTW your encrypted. So the modified TWRP won't work.
How to fix:
Wipe Userdata with Fastboot / fastboot erase UserData
Boot into Twrp modified twrp.
Flash OOS 4.0 flash SuperSU and let it boot
You should be decrypted DO NOT install a boot password since you will be encrypted again.
Click to expand...
Click to collapse
Thanks a lot for informing me mate. I really don't want to decrypt my storage as of now. I guess flashing stock recovery is the only solution now. Will hope someone would pick up the twrp and update it.

anshulajain said:
I haven't rooted my phone again. My only reason to root is to install Adaway to block all ads. With DNS66 and Adguard, I have little incentive to root my stock nougat install.
Edit : I had encryption during 3.2.8 and it carried over to 4.0
Click to expand...
Click to collapse
Seems like stock recovery is the best way as of now. Seems like I'll have to love without root until someone updates twrp to support encrypted storage.

I haven't updated to Nougat yet, but I looked over Chainfire's SuperSU changelog and its installation script and both of them confirm that from March installing SuperSU prevents forced encryption. Also many guides suggest installing it as way for disabling forced encryption. Of course you have to flash SuperSU just after flashing ROM, before booting the system.

abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
Very simple indeed...
1. Switch on wifi
2. Download OTA and click install whem finished
3. Once installation completed, flash twrp .28 and latest su
4. Reboot and ignore any errors, youwill beup and running fine...

Zielony360 said:
I haven't updated to Nougat yet, but I looked over Chainfire's SuperSU changelog and its installation script and both of them confirm that from March installing SuperSU prevents forced encryption. Also many guides suggest installing it as way for disabling forced encryption. Of course you have to flash SuperSU just after flashing ROM, before booting the system.
Click to expand...
Click to collapse
That i already knew mate. But i WANT my storage to remain encrypted. And that's the issue with modified TWRP. You can't enter into recovery on that if your storage is encrypted.
kpmohamedhussain said:
Very simple indeed...
1. Switch on wifi
2. Download OTA and click install whem finished
3. Once installation completed, flash twrp .28 and latest su
4. Reboot and ignore any errors, youwill beup and running fine...
Click to expand...
Click to collapse
Again, "You can't enter into recovery on modified TWRP if your storage is encrypted." So i won't be able to enter into twrp in the first place, let alone flash anything.

abhibnl said:
Hello all!
I am currently on OOS 3.2.8, and official TWRP. I have read all the instructions on the forums but all lead to one option, formatting internal memory. So, my question are:
1. Will flashing oos 4.0 work with official TWRP or 8 have to use modified 28 version?
2. How can I flash oos 4 with modified TWRP and not have to wipe internal memory?
I would appreciate all the responses. Thanks
Click to expand...
Click to collapse
In the same boat as you. I have OOS 3.2.8 encrypted, rooted and TWRP 3.0.2-1.26. I too would like to update but have way to much stuff on my phone to back it all up and restore it. Hope you or someone come's up with a solution. I will be following your thread.
Thanks.

Go to twrp. Press backup. Select only data. Save to PC youre backup for safety..
3.2.8 it's Android 6, 4.0 it's Android 7. Some apps might not work from base to base.
If you want to change to F2FS it will format youre phone, wipe phone full internal memory. If you want to change it back to ext4, same.
Clean flash, full wipe it's always better.

dmoses1969 said:
In the same boat as you. I have OOS 3.2.8 encrypted, rooted and TWRP 3.0.2-1.26. I too would like to update but have way to much stuff on my phone to back it all up and restore it. Hope you or someone come's up with a solution. I will be following your thread.
Thanks.
Click to expand...
Click to collapse
My suggestion (and my steps are in #1), install stock recovery, install snap VPN, download the update and install (ignore any errors on root). Once done, you will have Nougat with stock recovery, encryption maintained and all app data also intact.

anshulajain said:
My suggestion (and my steps are in #1), install stock recovery, install snap VPN, download the update and install (ignore any errors on root). Once done, you will have Nougat with stock recovery, encryption maintained and all app data also intact.
Click to expand...
Click to collapse
This is the last resort brother. With this method, unfortunately I won't have any root available. The only way now is to wait for updated twrp.

abhibnl said:
This is the last resort brother. With this method, unfortunately I won't have any root available. The only way now is to wait for updated twrp.
Click to expand...
Click to collapse
I dont know. I found this on Oneplus forum. May be worth trying. Just not 100% sure.....

Thanks! Will try and let you know

abhibnl said:
Thanks! Will try and let you know
Click to expand...
Click to collapse
Well, I tried something, waiting on it to finishing booting and see how it went.
I flashed twrp-3.0.2-1.28-oneplus3p version,
Flashed the OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip inside TWRP,
Flashed SR1-SuperSU-v2.79-SR1-20161221223537.zip right after flashing OTA zip.
Its rebooting and says Android is upgrading. Fingers crossed.
EDIT: Its booted and I am on Nougat, didnt lose my data and phone is still encrypted!
Edit: Ended up having issues with settings app locking up. So, I went a different route and its all working great now.
Downloaded the stock recovery image and renamed it to recovery.img
Make sure after you rename it its not named recovery.img.img, If you have show file extensions enabled on your pc you should already see the file extension.
Rebooted to bootloader - adb flash recovery recovery.img
Using the volume keys and power button selected - reboot recovery.
Now in stock recovery - flashed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
After rom is done flashing, went right back into bootloader. Did not let my phone reboot to start the OS.
Renamed twrp-3.0.2-1.28-oneplus3p.img to recovery.img
adb flash recovery recover.img
Powered off phone and Manually boot it into recovery by holding Power + Volume Down button.
Phone booted into TWRP
Flashed SR1-SuperSU-v2.79-SR1-20161221223537.zip
Wiped cache / dalvik
Rebooted system from TWRP and waited. System is really smooth now, no issues yet. Been playing with it for awhile now.
During the booting up process it might take a minute and it will reboot twice. Dont get nervous like I did thinking it was going to start bootlooping. It booted just fine. I read in a nother thread that SuperSU is what causes it to boot twice.
So......Now I have OOS 4.0 Nougat, Rooted, Encrypted and everything seems to be working fine.

[How to root] Honor 6x with Magisk 14 - B367 (fast method for professional users)

[How to root] Honor 6x -B367- with Magisk 14
(fast method for professional users)
Use TWRP Recovery from the attachment.
Make a Backup first.
Uninstall SuperUser App-
[*]in TWRP flash unSu.zip-
[*]with TWRP restore the Stock Kernel (Boot Partition) from a backup-
[*]flash in TWRP Magisk-v14.0.zip-
[*]the magisk app is automatic installed .
[*]Reboot-
[*]flash in TWRP BusyBox-Magisk-1.25.zip-
[*]for Ad Block Plus first install the app and then flash the zip-
[*]if the flashing fails, please add the modules in the Magisk Manager App.
[*]Don't experiment with Xposed!
[*]The SafetyNet is thereby lost.
​
TWRP:
https://mega.nz/#!9l0jFQaZ!WJipSNyrecAuyok4Wpp_NM6fxWyFPWwn2aP34tW50sU

There's no point in installing MagiskManager. When you flash Magisk.zip, it automatically installs the manager apk. If your phone is not rooted, all you have to do is to flash the Magisk.zip in TWRP and that's it.

Thanks for your feedback. I will change the tuto immediately.

Can somebody share the boot.img for c432b367?
Thanks guys!

actually you can fix safetynet in honor 6x:
1. disable Hisuite HDB in settings>advanced settings>security
2. Go to developer options and enable adb debuging
3. go to apps and go to google play services and force stop it. and clear data (you know how to do it...)
4. run safetynet test
5. profit?
NOTE:you'll do this again if you reboot it except number 1...
EDIT: it works for me in my stock rom but IDK in other roms...
https://i.imgur.com/J8obP1l.png

I keep getting "error: cannot load 'berlin311'" when trying to flash twrp
Please help

If we have twrp from open kirin team installed, do we still need to flash this twrp or can use the same one?

Just realized that this is the same OpenKirin TWRP. Proceeding with Magisk for the first time now

Any thoughts on the error loading twrp?

Challah said:
Any thoughts on the error loading twrp?
Click to expand...
Click to collapse
I did not face any issue.. Was smooth. I am using magisk now

shashank1320 said:
I did not face any issue.. Was smooth. I am using magisk now
Click to expand...
Click to collapse
Sadly that doesn't help me much

Challah said:
Sadly that doesn't help me much
Click to expand...
Click to collapse
Which version of the are you using. I had one from open kirin team. Are you trying to boot to recovery with USB connected? Are you on emui 4/5?

Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.

Challah said:
Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.
Click to expand...
Click to collapse
Both are same file. Not sure why this issue. I flashed today couple of hours ago to install magisk as i did fload to be on stock.

I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img

Challah said:
I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img
Click to expand...
Click to collapse
Did you try relocking amd unlocking the bootloader again? Try once buddy

I figured it out, I had adb installed previously and it was opening it from a different place than I expected, so Berlin was in the wrong folder.

shashank1320 said:
Did you try relocking amd unlocking the bootloader again? Try once buddy
Click to expand...
Click to collapse
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.

ChinHon said:
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.
Click to expand...
Click to collapse
Working for me buddy. I was helping him as he had issue
Thanks for this..i got the confidence and was able to install magisk without issues which was not doing earlier

When on the step to flash busybox_magisk I get notified that magisk is not installed, magisk needs to be installed first, and then error "Updater process ended with ERROR: 1 Error installing zip file '/external_sd/BusyBox-Magisk-1.25.zip'?
I flashed magisk again, rebooted to recovery, tried busybox-magisk again, same error.

Root and Magisk on Oreo (oct security patch)

After using this phone for a while I decided to root it.
I unlocked bootloader, installed TWRP and flashed Magisk, but all I get is bootloop or stuck on bootlogo (your device has been unlocked.....)
SOLUTION
https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
Applicable also for moto Z2 Play, just with appropriate recovery, of course
Please note the updates to the first post. It may be necessary to do the procedure twice.
I tried these TWRPs:
3.2.3.0
64bit 3.2.1
and TWRP and modified magisk from https://forum.xda-developers.com/z2-play/how-to/guide-twrp-root-t3667769
I tried all TWRPs with both modified magisk and official v18.
I have XT1710-09 with Oreo and October security patch
Is there a way to root this lastest firmware?
Thanks

Klen2 said:
I tried these TWRPs:
3.2.3.0
64bit 3.2.1
and TWRP and modified magisk from https://forum.xda-developers.com/z2-play/how-to/guide-twrp-root-t3667769
I tried all TWRPs with both modified magisk and official v18.
I have XT1710-09 with Oreo and October security patch
Is there a way to root this lastest firmware?
Thanks
Click to expand...
Click to collapse
I did 3.2.3-0 TWRP method (by Junior Passos) on my XT1710-06 device with 8.0 on August 1 security patch (purposefully neglected updating any further cause method was tested exactly up to August patch according to Passos) and everything seems working pretty fine for a month now. Think I've installed no Magisk modules other than Xposed systemless yet and I've no interest in SafetyNet as well, so not deeply tested either. Don't know for sure, but I guess there's a good chance for such method to work on October patch too. Just be sure to perform every step as it is now in the 3.2.3-0 OP. One word of advice: after performing TWRP backup, look for it in /system/media and move it to both external and internal SDcards just in case something goes wrong (usually because of a missed step, I can say)... Also: I recommend to install Magisk v17.1 first time; then, if you want, update to v18 but right from the installer...
Sent from my Moto Z2 Play using XDA Labs

Strange, I have zero magisk problems when using the latest stock rom. Flash in twrp, done, no issues. However, it could be because I first back up boot and system and then restore them with twrp before rooting(this removes encryption).

Have these steps worked for me...
1.)Flash TWRP using Fastboot
2.)Go to TWRP/Settings and open Terminal.
3.)Run both of following commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
Click to expand...
Click to collapse
4.)Flash Magisk-v17.1.zip
5.)Repeat step 2 and 3 dont wipe.
6.)Start
NOTE: before Reinstall stock or uninstall Magisk.

I did the Junior Passos method of doing the backup, and everything is working like a charm.

Cupcake 1.5 said:
Strange, I have zero magisk problems when using the latest stock rom. Flash in twrp, done, no issues. However, it could be because I first back up boot and system and then restore them with twrp before rooting(this removes encryption).
Click to expand...
Click to collapse
Hi, Could you please, tell me which stock ROM you are using and where is possible to get it?
First time I am having problem with Magisk, never had on other phones.
Problem = Bootlop

OldUncle said:
Hi, Could you please, tell me which stock ROM you are using and where is possible to get it?
First time I am having problem with Magisk, never had on other phones.
Problem = Bootlop
Click to expand...
Click to collapse
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.

Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
Perfect!
Thank you very much!
The only solution which worked!
Finally I got full control on my Z2 Play.

Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
Regarding backup, this is done through the stock ROM correct (Settings --> System --> Backup to Google Drive).
Thanks,
smithmal

Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
This worked perfectly on my Moto Z2 XT1710-06 with Oreo 8.0 when no other options worked.
Flash or Boot into TWRP
Backup System and Boot partitions in TWRP
Restore System and Boot Partitions in TWRP (note I had to enable R/W access in TWRP to restore the system partition)
Flash Magisk-v19.3.zip
Reboot
That is it. Now Rooted and passes all SafteyNet test. No more restricted apps. Even Google Pay now works.
Thank You.

sick
Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
your method worked like charm, thanks alot man

[GUIDE] How to Root OnePlus 7T without TWRP

So today with some testers i managed to make root on OnePlus 7T, I want to specify that 95% of the work was done by @topjohnwu (Magisk creator). For now you should use only Magisk Canary files
I will explain 2 different guides:
First Root Guide:
This guide is for a specific rom version, so you will need to use a specific patched boot.img
- Download the patched_boot.img
- Reboot your device in bootloader-fastboot mode
- Flash the patched_boot.img in the boot partition:
Code:
fastboot flash boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
Second Root Guide:
This guide is more generic than the first one, you should use this one if you are unable to find a specific patched boot.img
- Download a patched_boot.img (you should try with the latest one)
- Reboot your device in bootloader-fastboot mode
- Boot the patched_boot.img:
Code:
fastboot boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
- Click on Install, then direct install and wait the end of the process
- Reboot the device
Third Root Guide:
Guide by @gpz1100
TIPS:
Actually you should use only Magisk canary files Magisk 20.3
You can get the stock boot images from the fastboot rom: https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
Actually i'm using magisk manager canary and magisk canary debug to patch the boot.img, I don't recommend updating magisk, if you don't want to see the updates install the normal magisk manager
Magisk 20.3 fully support OnePlus 7T and 7T Pro
HOW TO UPDATE a ROM and KEEP ROOT:
Before all Disable all magisk modules
Be sure to use Canary Magisk Manager and Canary Magisk (debug)
You can update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
Download:
Patched/Stock Boot Images: https://www.androidfilehost.com/?w=files&flid=300177
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Donations:
Credits:
@RohanAJoshi

Flashed and working flawless.
Really thanks for this.
Awesome work bro.

Can you please upload the patched boot.img please? I dont see it in the above folder at all.

nick_22 said:
Can you please upload the patched boot.img please? I dont see it in the above folder at all.
Click to expand...
Click to collapse
Done, i uploaded them using ftp and i forgot to move the files in the right folder

Working, thanks a lot @mauronofrio

I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.

jesrani said:
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
Click to expand...
Click to collapse
See OP, its clearly mentioned there. You have to flash this via fastboot and not any custom recovery. Firstly setup adb on your PC and then check the commands. Its very easy. Do some googling and still if its difficult for you, come back and ask.

jesrani said:
I am on 10.0.3 begin so i should flash the magisk patched boot image of this version, is that correct? With what should i flash, sdk tools or any other specific tool? Is there any portable adb toolkit and do i need to copy the not image in the same folder as adb?
Edit : I tried but the device was locked so unlocked it after finding instructions on xda. Never knew it would wipe everything including internal storage also
Need to install everything again and have lost data of last few days. But I got root so that's the only consolation. Also a lesson never to make unnecessary haste. But it's fine. Won't repeat the mistake again.
Click to expand...
Click to collapse
Welcome to the android scene, reminds me of the old psx scene

I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.

@mauronofrio, thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?

nick_22 said:
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
Click to expand...
Click to collapse
Get your stock boot.img from 1st post.
Reboot to bootloader.
And do this command
fastboot flash boot boot.img
fastboot reboot
Device will boot unrooted.
---------- Post added at 05:58 AM ---------- Previous post was at 05:55 AM ----------
jesrani;80464121 [user=4712355 said:
@mauronofrio[/user], thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
Click to expand...
Click to collapse
1. Yes, always wipe
2. Just update as usual, let update go, after installation complete, don't reboot device. Go to magisk, install, install on inactive slot. Reboot. You will be rooted (Warning : this is not tested on 7T, this method from 7)
3. TWRP will be developed but some good dev like @mauronofrio need device for this, as of now, no hopes for twrp. We are lucky that we got root.

RohanAJoshi said:
1. Yes, always wipe
2. Just update as usual, let update go, after installation complete, don't reboot device. Go to magisk, install, install on inactive slot. Reboot. You will be rooted (Warning : this is not tested on 7T, this method from 7)
3. TWRP will be developed but some good dev like @mauronofrio need device for this, as of now, no hopes for twrp. We are lucky that we got root.
Click to expand...
Click to collapse
Thanks. Yes, root is good enough right now.
By "update as usual", do you mean through OTA? I think the phone reboots after update is downloaded and then installs the update but not sure. So once it reboots after updating, should I go to Magisk and install root?
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?

jesrani said:
Thanks. Yes, root is good enough right now.
By "update as usual", do you mean through OTA? I think the phone reboots after update is downloaded and then installs the update but not sure. So once it reboots after updating, should I go to Magisk and install root?
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
Click to expand...
Click to collapse
In older devices like OP5T it happens like this, not in newer devices. OP7T has seamless updates, its installs while device is turned on in second partition.

nick_22 said:
I installed some rogue module, that was not supposed to be installed on OP 7T. Due to this, now I am not able to boot into patched boot. I had to re-flash my stock boot.img to boot into my phone. Can you please help? I want to uninstall that particular module thats all. Tried doing something with your TWRP, but it wont show my system or storage at all.
Click to expand...
Click to collapse
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
jesrani said:
@mauronofrio, thanks so much for this. I had some queries :
1) Is the internal storage always wiped when bootloader is unlocked or did I do something wrong?
2) I have switched off auto-download of updates and also disabled automatic system updates in Developer settings. Is this correct? How to proceed when an update is available in future?
3) Will TWRP be developed or is it not useful for OP7T?
Click to expand...
Click to collapse
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)

mauronofrio said:
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
Click to expand...
Click to collapse
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?

jesrani said:
Should I keep Magisk update channel to Canary or Canary(Debug)? It's already showing an update as available. Should I update it?
Click to expand...
Click to collapse
Canary debug, don't update it

Help please. I have returned to Android after 5years with OnePlus 7t and trying to root it. I am trying this method but not being able to successfully root it. Steps I have tried
Went to fastboot mode by restarting the phone but I don't get an option to install the patched image file. And even boatloader is locked. Do I need to unlock the bootloader. And I unlock will I loose my data. Sorry for silly question I have completely forgot about Android.

Thanks, rooted successfully

?
To be honest need video tutorial asap?

mauronofrio said:
So, modules are saved in /data , the only way to remove them without root actually is wiping data, if you can't now, you can just flash the stock boot.img because without root the modules can't work. Usually you can remove all magisk stuff using magisk uninstaller.
1) yes
2) for rom updates i will pubblish a guide in the first post in some minutes
3) yes it will be developed but actually is needed a bit of time because twrp is not working for op7t (due to android 10)
Click to expand...
Click to collapse
Ok. Got it. So, I have already booted back to unrooted mode now. And I cant wipe my data again. Thanks for your response.

[OP7T][Stock/Magisk] OxygenOS 11.0.2.1.HD65AA boot.img

OnePlus 7T OxygenOS 11.0.2.1.HD65AA Global boot.img
Stock: https://srv-file9.gofile.io/download/9552fcfe-db22-44ef-81a6-5dd49b7e2c6b/boot.img
Magisk v23.0 Patched: https://file5.gofile.io/download/bb88a9cb-e642-4888-b73e-76265a34a6cf/magisk_patched-23000.img

Is this for root? I'm on 11.0.1.1 and rooted, now I see the OTA for 11.0.2.1, is there a way I can update while keeping root?

My computer is down so:
THANKS A MILLION!!!!!!!!!!!!!
YOU'RE SO AWESOME!!!!!!!!!!!!

Orion9k0 said:
Is this for root? I'm on 11.0.1.1 and rooted, now I see the OTA for 11.0.2.1, is there a way I can update while keeping root?
Click to expand...
Click to collapse
If you are not using TWRP, follow this guide: https://forum.xda-developers.com/t/guide-how-to-root-oneplus-7t-without-twrp.3979307/

didnt work. i got stuck on the booting animation. ive heard this is an issue and have experienced this personally with the past 3 updates. i downloaded the patched image to my pc. ive got all the drivers installed and everything. i go into fastboot mode and use this command
Code:
fastboot boot magisk_patched.img
this then boots to the booting animation which it gets stuck on

posiblyLopsided said:
didnt work. i got stuck on the booting animation. ive heard this is an issue and have experienced this personally with the past 3 updates. i downloaded the patched image to my pc. ive got all the drivers installed and everything. i go into fastboot mode and use this command
Code:
fastboot boot magisk_patched.img
this then boots to the booting animation which it gets stuck on
Click to expand...
Click to collapse
Did you switch back the default OTA active slot after flashing both?

nagi_007pk said:
Did you switch back the default OTA active slot after flashing both?
Click to expand...
Click to collapse
i did not flash i only booted. i have tried flashing in the past with android 11 and had the same result of eternal loading. but that was a while ago and it is possible i did smth wrong.

nagi_007pk said:
Did you switch back the default OTA active slot after flashing both?
Click to expand...
Click to collapse
Did you remove or at the very least disable all Magisk modules before OTA updating?

i dont believe i had any enabled in the last update because i havnt had root since android 10 but maybe when i initially updated months ago to android 11 i may have.

posiblyLopsided said:
i dont believe i had any enabled in the last update because i havnt had root since android 10 but maybe when i initially updated months ago to android 11 i may have.
Click to expand...
Click to collapse
Try this: If you need help you can always just post a quote here
adb reboot bootloader
fastboot boot "your magisk.img"
Let your phone boot (happens automatically)
adb reboot bootloader
fastboot flash boot "your magisk.img"

kurskoo40 said:
Try this: If you need help you can always just post a quote here
adb reboot bootloader
fastboot boot "your magisk.img"
Let your phone boot (happens automatically)
adb reboot bootloader
fastboot flash boot "your magisk.img"
Click to expand...
Click to collapse
the issue is that when i do fastboot boot magisk.img it gets stuck on the boot animation. i have to hold the power button and volume up to force it to power off then i can boot it back to the normal version

posiblyLopsided said:
i dont believe i had any enabled in the last update because i havnt had root since android 10 but maybe when i initially updated months ago to android 11 i may have.
Click to expand...
Click to collapse
Ensure the folder /data/adb/modules is empty. In other words, delete all your Magisk modules and try again.

thexile said:
Ensure the folder /data/adb/modules is empty. In other words, delete all your Magisk modules and try again.
Click to expand...
Click to collapse
how would i do that? can i use my phone file manager or do i need to use adb?

posiblyLopsided said:
how would i do that? can i use my phone file manager or do i need to use adb?
Click to expand...
Click to collapse
Since you have no root access currently, you have to do so via adb in recovery mode with adb enabled.

thexile said:
Since you no root access currently, you have to do so via adb in recovery mode with adb enabled.
Click to expand...
Click to collapse
im camping over the weekend so i will try this on monday and get back to you if it works or not. i assume now its prob good practice to disable magisk modules when updating so i will do that from now on.

posiblyLopsided said:
im camping over the weekend so i will try this on monday and get back to you if it works or not. i assume now its prob good practice to disable magisk modules when updating so i will do that from now on.
Click to expand...
Click to collapse
Yes, at the very least disable all Magisk modules before OTA update. I learnt this hard way. One particular module that I know of which will cause bootloop after OTA is SmaliPatcher.
Anyway, I found a simpler method which bypass the manual patching of stock recovery.img (I couldn't get it to work on OOS11 anyway).
Use this version of TWRP and fastboot boot into it. You should then boot into TWRP (without overwriting your stock recovery) and use TWRP file manager to delete all Magisk modules.

thexile said:
Yes, at the very least disable all Magisk modules before OTA update. I learnt this hard way. One particular module that I know of which will cause bootloop after OTA is SmaliPatcher.
Anyway, I found a simpler method which bypass the manual patching of stock recovery.img (I couldn't get it to work on OOS11 anyway).
Use this version of TWRP and fastboot boot into it. You should then boot into TWRP (without overwriting your stock recovery) and use TWRP file manager to delete all Magisk modules.
Click to expand...
Click to collapse
yeah looks like i learned the hard way too. also i didnt realise they released twrp for oneplus 7t. id heard that it just didnt work with android 11 but maybe im wrong. ill try it out anyways. if the twrp works that would be amazing. also thanks for all the help.

thexile said:
OnePlus 7T OxygenOS 11.0.2.1.HD65AA Global boot.img
Stock: https://srv-file9.gofile.io/download/9552fcfe-db22-44ef-81a6-5dd49b7e2c6b/boot.img
Magisk v23.0 Patched: https://srv-store6.gofile.io/download/bb88a9cb-e642-4888-b73e-76265a34a6cf/magisk_patched-23000.img
Click to expand...
Click to collapse
Thanks. This worked fine. I just used local install from update, backed out without rebooting, installed magisk app and did the first reboot into bootloader, then wrote magisk modded boot image to boot a/b. It was a dirty update over the prior version.

thexile said:
Yes, at the very least disable all Magisk modules before OTA update. I learnt this hard way. One particular module that I know of which will cause bootloop after OTA is SmaliPatcher.
Anyway, I found a simpler method which bypass the manual patching of stock recovery.img (I couldn't get it to work on OOS11 anyway).
Use this version of TWRP and fastboot boot into it. You should then boot into TWRP (without overwriting your stock recovery) and use TWRP file manager to delete all Magisk modules.
Click to expand...
Click to collapse
i have successfully rooted after useing twrp to remove those magisk modules.

Hi, I really need EU version of boot.img, could you please help me?
I've even looked for the full 11.0.2.1.HD65BA but with no luck.
So basically can't find anywhere both the boot.img and the full stock rom, any advice?
Thank you