Related
Hello everyone, I have a Moto Z2 Force XT1789-06. I had updated the firmware and after that the phone is working but the baseband is not found and the IMEI is unknow and of course there is no wi-fi and no carrier signal. I have already tried to flash the original retail firmware and it can be installed accurately but the baseband and IMEI are not identified.
Do you know how can I repair it?
Thank you.
I solved the problem. You can close the discussion.
solocchi said:
I solved the problem. You can close the discussion.
Click to expand...
Click to collapse
How did you solve it?
Yes, I certainly solved the problem.
solocchi said:
Yes, I certainly solved the problem.
Click to expand...
Click to collapse
He asked how, not if you did. Usually on this site it is advised to share you solution so if someone else is trying to fix the same issue they can try what you did.
lol i found that there is not issue for imei = 0, my xt1635 has dual sim , and both IMEI=0, and voice / data work fine
svenrod09 said:
How did you solve it?
Click to expand...
Click to collapse
What problem do you have? "imei unknow" or "baseband not found"? What did you do exactly on the phone?
solocchi said:
What problem do you have? "imei unknow" or "baseband not found"? What did you do exactly on the phone?
Click to expand...
Click to collapse
Well I had the problem of baseband not found but I could solve it, I still continue without a mobile network although the IMEI does appear. The only thing I did was update from nougat to Oreo. The phone is the AT & T variant and is unlocked for all networks. Any solution to have mobile network again?
svenrod09 said:
Well I had the problem of baseband not found but I could solve it, I still continue without a mobile network although the IMEI does appear. The only thing I did was update from nougat to Oreo. The phone is the AT & T variant and is unlocked for all networks. Any solution to have mobile network again?
Click to expand...
Click to collapse
Have you tried installing the latest version of the AT&T OCSX27.109-47-14 firmware? It also happened to me not to have a telephone network and wifi. It is caused by the wrong NON-HLOS.bin file.
solocchi said:
Have you tried installing the latest version of the AT&T OCSX27.109-47-14 firmware? It also happened to me not to have a telephone network and wifi. It is caused by the wrong NON-HLOS.bin file.
Click to expand...
Click to collapse
Yes, that version is the one that installs first now I am with the OPXS27.109-34-15. I'll try flashing the stock ROM maybe the problem is solved.
I managed to get myself in this situation this weekend... When I start my phone in fastboot mode it shows "baseband <not found>" and when I start it I get no wifi or network.
I've flashed almost every Retail firmware from this repo to no avail: https://mirrors.lolinet.com/firmware/moto/nash/official/RETAIL/
Any particular version I should be installing perhaps? Could I install another version that is not retail? Mine is the -05 variant.
felipevsw said:
I managed to get myself in this situation this weekend... When I start my phone in fastboot mode it shows "baseband <not found>" and when I start it I get no wifi or network.
I've flashed almost every Retail firmware from this repo to no avail: https://mirrors.lolinet.com/firmware/moto/nash/official/RETAIL/
Any particular version I should be installing perhaps? Could I install another version that is not retail? Mine is the -05 variant.
Click to expand...
Click to collapse
Try the Lenovo Moto smart assistant. It will download the correct firmware for your model.
Uzephi said:
Try the Lenovo Moto smart assistant. It will download the correct firmware for your model.
Click to expand...
Click to collapse
Nice tool, I wasn't aware of it. I managed to connect it and it asked me to reboot to fastboot mode, but when it is in fastboot mode it says my device is not supported... :crying:
felipevsw said:
Nice tool, I wasn't aware of it. I managed to connect it and it asked me to reboot to fastboot mode, but when it is in fastboot mode it says my device is not supported... :crying:
Click to expand...
Click to collapse
Hello. You have an XT1789-05. You do not have to install a Retail firmware but Latam.
The latam firmware are these:
https://mirrors.lolinet.com/firmware/moto/nash/official/AMXLA/
https://mirrors.lolinet.com/firmware/moto/nash/official/CLALASL/
https://mirrors.lolinet.com/firmware/moto/nash/official/TELMX/
solocchi said:
Hello. You have an XT1789-05. You do not have to install a Retail firmware but Latam.
The latam firmware are these:
https://mirrors.lolinet.com/firmware/moto/nash/official/AMXLA/
https://mirrors.lolinet.com/firmware/moto/nash/official/CLALASL/
https://mirrors.lolinet.com/firmware/moto/nash/official/TELMX/
Click to expand...
Click to collapse
Thanks! The TELMXLA one restored my baseband! :highfive:
felipevsw said:
Thanks! The TELMXLA one restored my baseband! :highfive:
Click to expand...
Click to collapse
You have Mobile Data? I'm from LATAM too
felipevsw said:
Thanks! The TELMXLA one restored my baseband! :highfive:
Click to expand...
Click to collapse
what compilation number did you use?
svenrod09 said:
You have Mobile Data? I'm from LATAM too
Click to expand...
Click to collapse
Yes I have, mobile and wifi. Both were broken.
MooS313 said:
what compilation number did you use?
Click to expand...
Click to collapse
I'm not sure I understand what you mean... I used the latest version available for the TELMX one.
hello i have t-mobile variant , last night i plugged type c cable after that phone keeps rebooting to bootloader and says your device did not start successfully error . I have also flashed the oreo firmware it doesnot fixed that . I can saee baseband null in bootloader . please help
svenrod09 said:
Well I had the problem of baseband not found but I could solve it, I still continue without a mobile network although the IMEI does appear. The only thing I did was update from nougat to Oreo. The phone is the AT & T variant and is unlocked for all networks. Any solution to have mobile network again?
Click to expand...
Click to collapse
Please help me my phone is restatring and show baseband not found
Hi!
I have this G7 with the model LM-G710V with an unlocked bootloader and managed to successfully flash Phh-Treble by following this thread:
https://forum.xda-developers.com/lg-g7-thinq/development/rom-phh-aosp-8-1-t3808649 :victory:
but then i would like to convert back to stock but unfortunately there are no available KDZ for G710V in the interweb.
would it be possible to convert G710V to G710EM ,or to a similar effect, by flashing 10b Vendor img and boot img then the kdz found in this thread:
https://forum.xda-developers.com/lg-g7-thinq/development/dump-g7-stock-vendor-t3840834 ?
or would this just leave me with a dead bricked phone?
additional notes:
bought this phone as a secondhand from someone in facebook with the bootloader unlocked and with, as the seller stated, "G7+" rom with issues.
no backup was made before
Thank you for anyone willing to answer! :good::fingers-crossed:
Pics for reference
https://i.imgur.com/xSnRnL1.jpg
https://i.imgur.com/PebWDAM.jpg
Hello @xElouise, according to the LG Open Source Code Distribution website (here), the G710V is equivalent to:
G710VM
G710AWM
G710AWMH
G710VMP
G710VMX
KDZs from any of the models above should work fine, just note that they may come with carrier bloatware. Reflashing the stock firmware is the same as any other G7 version (here, up to the first half step 5).
Does your phone have an IMEI code and working telephony? Because from the info I have gathered on the internet, looks like the G710V is a retail demo unit without either baseband or IMEI.
Hey there! Thanks for the reply!
Unfortunately since after flashing Phh-Treble LGUP does not recognize the phone anymore (Shows up as Unknown)(maybe because i flashed the vendor img(?) idk.)
Anyway, since back then before flashing Phh-Treble i was already trying to flash KDZs Thru LGUP, but unfortunately LGUP throws me error saying it does not support cross flashing.
I have tested the following before:
G710VM - LGUP Error cant cross flash G710V to G710VM
G710AWM - LGUP Error cant cross flash G710V to G710
G710VMX - LGUP Error cant cross flash G710V to G710
This unit IMEI & Baseband says unknown. This also has the white sticker at the back with some of it's details like unit model, FCC Id, etc.
xElouise said:
Hey there! Thanks for the reply!
Unfortunately since after flashing Phh-Treble LGUP does not recognize the phone anymore (Shows up as Unknown)(maybe because i flashed the vendor img(?) idk.)
Anyway, since back then before flashing Phh-Treble i was already trying to flash KDZs Thru LGUP, but unfortunately LGUP throws me error saying it does not support cross flashing.
I have tested the following before:
G710VM - LGUP Error cant cross flash G710V to G710VM
G710AWM - LGUP Error cant cross flash G710V to G710
G710VMX - LGUP Error cant cross flash G710V to G710
This unit IMEI & Baseband says unknown. This also has the white sticker at the back with some of it's details like unit model, FCC Id, etc.
Click to expand...
Click to collapse
Try hooking it up to LG bridge. It will automatically recognize the phone in download mode and it will update it to the latest stock.
LameMonster82 said:
Try hooking it up to LG bridge. It will automatically recognize the phone in download mode and it will update it to the latest stock.
Click to expand...
Click to collapse
LG Bridge fails to recognize the phone on download mode.
It says " Notice: Can not connect. disconnect the USB cable from your computer and reconnect" done this multiple times, even swapped usb cables with other phone
edit: So i was able to make LGUP recognize the device again but still same problem with cross flashing <see pic for reference>
https://imgur.com/JZrllUp
xElouise said:
LG Bridge fails to recognize the phone on download mode.
It says " Notice: Can not connect. disconnect the USB cable from your computer and reconnect" done this multiple times, even swapped usb cables with other phone
edit: So i was able to make LGUP recognize the device again but still same problem with cross flashing <see pic for reference>
https://imgur.com/JZrllUp
Click to expand...
Click to collapse
You can contact the guy that sold the phone to you and see if he has a dump. Otherwise I can pack the system and the vendor but I'm not 100% sure if it will work
Hi, is your unit the demo unit one, without phone function and with retail mode app? Did you encounter any issues with the flashed ROM so you're changing again? I managed to land one of those demo units but there's too much restriction for usage so I was thinking of flashing another ROM but I'm a complete noob with regards to that.
Thanks.
xElouise said:
Hi!
I have this G7 with the model LM-G710V with an unlocked bootloader and managed to successfully flash Phh-Treble by following this thread:
https://forum.xda-developers.com/lg-g7-thinq/development/rom-phh-aosp-8-1-t3808649 :victory:
but then i would like to convert back to stock but unfortunately there are no available KDZ for G710V in the interweb.
would it be possible to convert G710V to G710EM ,or to a similar effect, by flashing 10b Vendor img and boot img then the kdz found in this thread:
https://forum.xda-developers.com/lg-g7-thinq/development/dump-g7-stock-vendor-t3840834 ?
or would this just leave me with a dead bricked phone?
additional notes:
bought this phone as a secondhand from someone in facebook with the bootloader unlocked and with, as the seller stated, "G7+" rom with issues.
no backup was made before
Thank you for anyone willing to answer! :good::fingers-crossed:
Pics for reference
https://i.imgur.com/xSnRnL1.jpg
https://i.imgur.com/PebWDAM.jpg
Click to expand...
Click to collapse
@LameMonster82 , The seller said that he bought it off someone when it has boot loop issues and have his buddy fix it for him & he does not have any backup (guess that makes me a third hand(?) not really affected by it since i got the unit for a dirt cheap price around <$100 and it's quite a smooth unit too).
If you could, in your spare time of course, make the pack that would be really much appreciated! Thank you very much!
@ceezae , This may be a demo unit since i got it without any sim functions and a blank IMEI. I don't know about retail mode, though there was an widget applet before which showcases LG G7's features. I already bought the unit with it's boot loader already unlocked so I have no idea how a G710V got unlocked. When i bought the unit it does not have any audio at all either thru the headphone or speaker that's why i flashed a custom rom.
Anyway , since I flashed Phh-Treble 8.1 the phone's working smoothly aside from the aforementioned bugs in this thread
I am going back to stock since i can not utilize the quad DAC feature in custom rom and I could not get Gcam to work (it either crash or extremely Laggy)
I would also like to mention that:
I can not seem to boot to recovery via (Vol down + Power button) it always say that "Factory Reset is Disabled by Kill Switch" even though OEM Unlock is ticked in the developer settings as well as unsynced Google Account.
And my internal storage is showing that I only have 16 GB of internal (would be easy to fix with TWRP but again no luck with custom recovery)
xElouise said:
Hi!
I have this G7 with the model LM-G710V with an unlocked bootloader and managed to successfully flash Phh-Treble by following this thread:
https://forum.xda-developers.com/lg-g7-thinq/development/rom-phh-aosp-8-1-t3808649 :victory:
but then i would like to convert back to stock but unfortunately there are no available KDZ for G710V in the interweb.
would it be possible to convert G710V to G710EM ,or to a similar effect, by flashing 10b Vendor img and boot img then the kdz found in this thread:
https://forum.xda-developers.com/lg-g7-thinq/development/dump-g7-stock-vendor-t3840834 ?
or would this just leave me with a dead bricked phone?
additional notes:
bought this phone as a secondhand from someone in facebook with the bootloader unlocked and with, as the seller stated, "G7+" rom with issues.
no backup was made before
Thank you for anyone willing to answer! :good::fingers-crossed:
Pics for reference
https://i.imgur.com/xSnRnL1.jpg
https://i.imgur.com/PebWDAM.jpg
Click to expand...
Click to collapse
Hello! Publish the partition backup of G710V
I need it thank you
Can be backed up with the following adb command
adb shell dd if=/dev/block/bootdevice/by-name/abl_a of=/sdcard/abl_a.img
adb shell dd if=/dev/block/bootdevice/by-name/ftm of=/sdcard/ftm.img
[email protected] said:
Hello! Publish the partition backup of G710V
I need it thank you
Can be backed up with the following adb command
adb shell dd if=/dev/block/bootdevice/by-name/abl_a of=/sdcard/abl_a.img
adb shell dd if=/dev/block/bootdevice/by-name/ftm of=/sdcard/ftm.img
Click to expand...
Click to collapse
Hi there!
I am terribly sorry but my device is kinda a bit soft bricked(?) at the moment.
I was trying to flash the Stock Korean PIE KDZ and was successful but it had problems like WIFI can not be turned on and Random Reboots.
I think I also have lost access to Fastboot since the phone only Reboots itself normally.
My dumb self did not make a backup so I am a bit screwed at the moment.
Someone with an intact phone (which hasn't been flashed) will have to pack up their partitions and post it here. The G710V seems to be technically similar to the G710N but can't actually be flashed to a G710N (you can force this through using LGUP but it results in a phone that crashes all the time due to some issue with the wifi driver).
[email protected] said:
Hello! Publish the partition backup of G710V
I need it thank you
Can be backed up with the following adb command
adb shell dd if=/dev/block/bootdevice/by-name/abl_a of=/sdcard/abl_a.img
adb shell dd if=/dev/block/bootdevice/by-name/ftm of=/sdcard/ftm.img
Click to expand...
Click to collapse
Hey, I tried backing up these via adb shell myself on my G10V but... "permission denied". Great. Probably because the demo units force a Retail Mode device administrator that you can't remove at all. Can't even access the page itself in Settings ("you are not authorized..." blah blah). It's a shame, because I was really looking forward to helping OP.
have you succeeded I have the same problem as you
xElouise said:
Hi there!
I am terribly sorry but my device is kinda a bit soft bricked(?) at the moment.
I was trying to flash the Stock Korean PIE KDZ and was successful but it had problems like WIFI can not be turned on and Random Reboots.
I think I also have lost access to Fastboot since the phone only Reboots itself normally.
My dumb self did not make a backup so I am a bit screwed at the moment.
Click to expand...
Click to collapse
have you succeeded I have the same problem as you (I have the same thing as you me I have the retail mode app) and i also have the widget that introduces the lg g7 thinq i have to do what to remove the retail mode because i would like to use it as a phone to go on the internet etc and i also have the restrictions in the paremetre for the tab securiter
ok i also need to go back stock rom, is this possible? need g710v rom if anyone have
Lg g7 demo Lmg710v backup need
spacespeed01 said:
Someone with an intact phone (which hasn't been flashed) will have to pack up their partitions and post it here. The G710V seems to be technically similar to the G710N but can't actually be flashed to a G710N (you can force this through using LGUP but it results in a phone that crashes all the time due to some issue with the wifi driver).
Click to expand...
Click to collapse
I also need backup of LMG710V please anyone give backup (dont flash any firmware in g7 demo)
I tried All g7 firmwares flash in g7 demo unit
Lmg710n
Lmg710vm
Lmg710awm
Lmg710em
Lmg710em full modem files with octoplus..
Lmg710N qcn
I all tried but nothing work
Same problem
Wifi, storage, fasboot, restarting, auto fectory reset,
Problem still in all lg g7 firmwares
Ithink g7 demo unit have some hardware changes
G7 demo Wifi only has 2.4ghz wifi not 5ghz
Anyone want try fix problem
1.Flash LMGG710N firmware global version
2.write LMG710N QCN
3.fectory reset
Possible its works for
LMG710N qcn attached link
https://drive.google.com/file/d/1TWTtqOkzdR9FjHeghTF4CZHevwPqSmVG/view?usp=drivesdk
[email protected] said:
Hello! Publish the partition backup of G710V
I need it thank you
Can be backed up with the following adb command
adb shell dd if=/dev/block/bootdevice/by-name/abl_a of=/sdcard/abl_a.img
adb shell dd if=/dev/block/bootdevice/by-name/ftm of=/sdcard/ftm.img
Click to expand...
Click to collapse
no way to pull whith adb two files
check image
Did op found the firmware??
Does anyone have g710v firmware or backup???Appreciate !!
Gebozen said:
Does anyone have g710v firmware or backup???Appreciate !!
Click to expand...
Click to collapse
Is this for a Verizon G710VM?
i know, old thread.... but is there still no stock retail demo firmware dump anywhere?
paparansen said:
i know, old thread.... but is there still no stock retail demo firmware dump anywhere?
Click to expand...
Click to collapse
I have a dump. I did it using the EFM program from the Z3X team.
If you want to try to restore, write to the telegram.
Hi,
Its been some time since I did any flashing so apologies if this is a simple ask.
I have a H4113 XA2 dual Sim, I want to know if it is possible to flash the single sim H3113 equivalent firmware onto my phone because current firmware does not support VOWIFI etc. My network suppliers H3113 firmware does.
If so how do I do it in Flashtool as it currently tells me incompatible if I try the whole ftf.
Thanks in advance
emarlit said:
Hi,
Its been some time since I did any flashing so apologies if this is a simple ask.
I have a H4113 XA2 dual Sim, I want to know if it is possible to flash the single sim H3113 equivalent firmware onto my phone because current firmware does not support VOWIFI etc. My network suppliers H3113 firmware does.
If so how do I do it in Flashtool as it currently tells me incompatible if I try the whole ftf.
Thanks in advance
Click to expand...
Click to collapse
Hi
I don't think it's possible, you will get lots of problems due to compatibility... I advise you to use Magisk instead to put VoWiFi and other features.
Regards,
F.
It is possible change stock firmware whole one platform for XA2 it is "Nile". I flash stock rom "Discavery"(XA2 ultra) to "Pioneer"(regular XA2) they r both Nile-platform.
Other people flash stock-roms btwin regions, to unlock some 4G-bands, for example.
But, u have to know:
"Simlock.ta" (maybe all *.ta files, as usual i delete all of em from firmware folder)& "persist.sin" - are dangerous parts of stock-roms. Don't flash they r btwin different models!!! Bcoz of that *.ftf roms r dangerous variant(coz they contain this parts).
I use "xperifirm" to download firmware by *.sin-files, then delete *.ta and persist, after that flash by "newflasher".
Has anybody tried it yet? does it work?
Marfos said:
Has anybody tried it yet? does it work?
Click to expand...
Click to collapse
Yes, you can install H3113 firmware onto H4113, which is what i have been doing because it thinks my model is h3113
davidhozic said:
Yes, you can install H3113 firmware onto H4113, which is what i have been doing because it thinks my model is h3113
Click to expand...
Click to collapse
thanks! I will try to find the appropriate procedure, because i am not familiar, and i will intall it.
Marfos said:
thanks! I will try to find the appropriate procedure, because i am not familiar, and i will intall it.
Click to expand...
Click to collapse
Hi, Can either of you post a procedure how to do this? I'm desperate to get VOWifi back and need to flash a H3113 EE firmware to do it.
Your help would be appreciated.
Thanks
flashed h4113 onto h3113 but now have no service. imei is ok and phone not barred. any suggestions?
Any information anywhere on this, that diggs a bit further?
Hey guys, can you give me some insights. I relocked bootloader by flashing 10.0.3.0 through miflash. Now it recognizes sim but it says no service. Any ideas? Should i try unlocking bootloader again, and reflash the stock rom?
ouroboros12 said:
Hey guys, can you give me some insights. I relocked bootloader by flashing 10.0.3.0 through miflash. Now it recognizes sim but it says no service. Any ideas? Should i try unlocking bootloader again, and reflash the stock rom?
Click to expand...
Click to collapse
Try flash modem.img by yourself.
ondraczsk said:
Try flash modem.img by yourself.
Click to expand...
Click to collapse
Tried doing that. Twice. I reverted to oreo, and updated to pie. Still no service. The sim can be read, though. I think it's a hardware problem
ouroboros12 said:
Tried doing that. Twice. I reverted to oreo, and updated to pie. Still no service. The sim can be read, though. I think it's a hardware problem
Click to expand...
Click to collapse
So if "fastboot flash modem modem.img" not working, it may be hardware..
Or maybe it's caused by your carrier
I had the same problem. Used MI Flash to get to Pie 10.0.2 (December) and it worked. Not sure what's the deal with It, but don't believe this is a hardware issue.
The sim works on my redmi note 5. I'll try flashing the december update then. Hopefully it works
devotedfan said:
I had the same problem. Used MI Flash to get to Pie 10.0.2 (December) and it worked. Not sure what's the deal with It, but don't believe this is a hardware issue.
Click to expand...
Click to collapse
10.0.3.0 seems to have issues with SIM cards. When I flashed 10.0.3.0 via MiFlash SIM slots were swapped (SIM1 was shown as SIM2 and SIM1 was disabled) but this issue is fixed by flashing 10.0.2.0 then updating to 10.0.3.0. I guess stock 10.0.2.0 is more stable in terms of connectivity.
marstonpear said:
10.0.3.0 seems to have issues with SIM cards. When I flashed 10.0.3.0 via MiFlash SIM slots were swapped (SIM1 was shown as SIM2 and SIM1 was disabled) but this issue is fixed by flashing 10.0.2.0 then updating to 10.0.3.0. I guess stock 10.0.2.0 is more stable in terms of connectivity.
Click to expand...
Click to collapse
I actually reverted back to 9.6.4.0 then updated to pie. No service still, i'll try flashing 10.0.2.0. thanks
ouroboros12 said:
I actually reverted back to 9.6.4.0 then updated to pie. No service still, i'll try flashing 10.0.2.0. thanks
Click to expand...
Click to collapse
If you revert to oreo you have to flash the modem fix from here
Please any one can help me with unblinking my device I already passed all errors except for error called firehose getufsinfo failed anyone help please
Hello! Give us more details about what MSMTool did you used. Where did you downloaded? Is your device recognized by the MSMTool? What OP9Pro model do you have exactly? What region? Is carrier locked? Did you installed the Qualcomm drivers to detect your device in MSMTool?
Make sure u are using correct msm.. And b4 running msm make sure to click to use "use lite firehose" and u csn uncheck sha256 if it isn't msm for ur device amd it shld still work. Also it seems easier for msm to connect if u click enum a time or two til it says connected then click start
ducted said:
Hello! Give us more details about what MSMTool did you used. Where did you downloaded? Is your device recognized by the MSMTool? What OP9Pro model do you have exactly? What region? Is carrier locked? Did you installed the Qualcomm drivers to detect your device in MSMTool?
Click to expand...
Click to collapse
my dear friend i get all the files from here xda forums and the op9pro model is
OnePlus 9 Pro 5G LE2123and also i dont have any connection issues with msm tool it connect and start but after 10 seconds it give me error of firehose getufsinfo failed also i tried the way you said shooter7889 it dont work give me same error