Develop Bugs

First time messing with my phone, and it looks super soft bricked.

Hello, first timer here. I have never tried rooting or anything, but today I finally decided to... and messed it up.
Verizon Samsung Note 2 SCH-i605 (yes, still.)
Got it on July 2nd, 2013, so I believe it was build 4.1.1 kernel 3.1? Not too sure on the legalities
Completely unrooted and unmodded
I was using kingo root and everything was fine until it hit about 52% on the rooting process when my computer lost connection with my phone. Since, it gave me the "Firmware upgrade encountered an issue" problem. So then I google-fu'd and followed directions of:
http://forum.xda-developers.com/showthread.php?t=2040264
http://forum.xda-developers.com/showthread.php?t=2120726
http://forum.xda-developers.com/showthread.php?t=2582290
http://forum.xda-developers.com/showthread.php?t=2024207
etc.
and used Odin 3.10.7 (and 3.10.0 just in case, both on and off admin mode cause why not) on every single md5 available in all those links and the one from sammobile.com for sch-i605.
And each time, I would either received failure on "sboot.bin" or receive the "System Software Not Authorized" error if succeeded (it was stuck in bootload? too, kept flashing the logo then the error message). The VERY first time, however, it actually brought me to that page where I'm allowed to press things like erase cache, factory reset, or reboot my phone. There, I chose all those options in the order I've listed them. And ever since I haven't seen that screen again.
My issue seems to be every problem I can find put together, and can't seem to resolve it with my skills alone. I honestly don't care about recovering my data (which I believe is impossible now anyway) or rooting my phone. I just want it to turn on again.
Thanks in advance.
p.s. getting a new phone isn't an option currently
-edit-
Checked my verizon wireless software upgrade assistant for some info, and it says "Up to date" and "Version ND3" if that means anything to you pros out there.

jk1982 said:
Hello, first timer here. I have never tried rooting or anything, but today I finally decided to... and messed it up.
Verizon Samsung Note 2 SCH-i605 (yes, still.)
Got it on July 2nd, 2013, so I believe it was build 4.1.1 kernel 3.1? Not too sure on the legalities
Completely unrooted and unmodded
I was using kingo root and everything was fine until it hit about 52% on the rooting process when my computer lost connection with my phone. Since, it gave me the "Firmware upgrade encountered an issue" problem. So then I google-fu'd and followed directions of:
http://forum.xda-developers.com/showthread.php?t=2040264
http://forum.xda-developers.com/showthread.php?t=2120726
http://forum.xda-developers.com/showthread.php?t=2582290
http://forum.xda-developers.com/showthread.php?t=2024207
etc.
and used Odin 3.10.7 (and 3.10.0 just in case, both on and off admin mode cause why not) on every single md5 available in all those links and the one from sammobile.com for sch-i605.
And each time, I would either received failure on "sboot.bin" or receive the "System Software Not Authorized" error if succeeded (it was stuck in bootload? too, kept flashing the logo then the error message). The VERY first time, however, it actually brought me to that page where I'm allowed to press things like erase cache, factory reset, or reboot my phone. There, I chose all those options in the order I've listed them. And ever since I haven't seen that screen again.
My issue seems to be every problem I can find put together, and can't seem to resolve it with my skills alone. I honestly don't care about recovering my data (which I believe is impossible now anyway) or rooting my phone. I just want it to turn on again.
Thanks in advance.
p.s. getting a new phone isn't an option currently
-edit-
Checked my verizon wireless software upgrade assistant for some info, and it says "Up to date" and "Version ND3" if that means anything to you pros out there.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the best possible assistance, I'm going to move this thread to your device's Q&A forum. Good luck!

install kies and try flashing rom. do you have rom from i.e. sammobile? use different odin versions and do not mark repartition

yaro666 said:
install kies and try flashing rom. do you have rom from i.e. sammobile? use different odin versions and do not mark repartition
Click to expand...
Click to collapse
KIES is unable to read my phone (tried the bottom 3 versions of it), and I've tried running Odin 3.07 and unchecked repartition for every stock and restore md5s I had for my phone... the ones that didn't fail sboot.bin are still giving me unauthorized error.
I'll keep trying all the combinations, but it seems moot at this point.

5.1.1 OTA update not working

My phone is running the BOG5 5.0.1 software and it is a retail edition.
I recieved a notification on my device prompting me that a new update is available (finally! 5.1.1!) I tap "download now", the download eventually finishes and it proceeds to install.
My phone boots into recovery, "installing update" and very shortly after I see the droid triage error and below it says "error!" and then my phone reboots. When I unlock my phone it says, "Sorry, there was a problem updating your SAMSUNG SM-N910V. No changes were made."
I looked under software update in settings and it says "software not updated to N910VVRU2BOK3" and the error code is 410.
I also notice that when I go into recovery it says "dm-verity verification failed...."
I looked in Kies to see if the update was available there, and of course it wasn't. And I can't find the ROM anywhere as of yet to flash with ODIN.
I would appreciate all of the help I can get.
Thank you.

traceestarr said:
My phone is running the BOG5 5.0.1 software and it is a retail edition.
I recieved a notification on my device prompting me that a new update is available (finally! 5.1.1!) I tap "download now", the download eventually finishes and it proceeds to install.
My phone boots into recovery, "installing update" and very shortly after I see the droid triage error and below it says "error!" and then my phone reboots. When I unlock my phone it says, "Sorry, there was a problem updating your SAMSUNG SM-N910V. No changes were made."
I looked under software update in settings and it says "software not updated to N910VVRU2BOK3" and the error code is 410.
I also notice that when I go into recovery it says "dm-verity verification failed...."
I looked in Kies to see if the update was available there, and of course it wasn't. And I can't find the ROM anywhere as of yet to flash with ODIN.
I would appreciate all of the help I can get.
Thank you.
Click to expand...
Click to collapse
I'm having the exact same issue and symptoms, have you made any progress with this? If I find a solution I'll share here too. I've tried Kies and VZW Software Upgrade Assistant, neither finds the update, but I can get it on my retail VZ Note 4, just won't successfully install.

Keiller said:
I'm having the exact same issue and symptoms, have you made any progress with this? If I find a solution I'll share here too. I've tried Kies and VZW Software Upgrade Assistant, neither finds the update, but I can get it on my retail VZ Note 4, just won't successfully install.
Click to expand...
Click to collapse
Thank you for your feedback. I wonder if it has to do with a corrupt software build on our devices. I ordered my phone in November of last year and it came with BOG5 on it. I'm going to see about flashing stock BOG5 completely fresh on the phone and see if that corrects the issue.

traceestarr said:
Thank you for your feedback. I wonder if it has to do with a corrupt software build on our devices. I ordered my phone in November of last year and it came with BOG5 on it. I'm going to see about flashing stock BOG5 completely fresh on the phone and see if that corrects the issue.
Click to expand...
Click to collapse
I have similar issue ,i don't have a update yet showing on my device so i await for it to show up. Please let us know if flashing it makes the difference.

traceestarr said:
Thank you for your feedback. I wonder if it has to do with a corrupt software build on our devices. I ordered my phone in November of last year and it came with BOG5 on it. I'm going to see about flashing stock BOG5 completely fresh on the phone and see if that corrects the issue.
Click to expand...
Click to collapse
Sounds like something worth trying, I'll watch for an update on how it goes for you. Thanks!

I have found a solution (albeit requires a full wipe, which is worth having 5.1.1 for me)
Firstly, I attempted flashing the "stock restore" file in odin and resulted in an error, I then tried the full firmware instead (mind you for BOG5, if you're having problems on your current version I'd suggest using your current build) with success, proceed with a data wipe in recovery and noticed that the "dm-verity verification failed...." message is now gone and now that bottom area of the screen has information about applying Multi-CSC.
Restart the phone, set up as normal and go straight for the software update. My phone downloaded and installed the update perfectly! For safety just boot into recovery and do a full wipe again, and there you have it!
The stock firmwares for RETAIL SM-N910V are here: http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937

traceestarr said:
I have found a solution (albeit requires a full wipe, which is worth having 5.1.1 for me)
Firstly, I attempted flashing the "stock restore" file in odin and resulted in an error, I then tried the full firmware instead (mind you for BOG5, if you're having problems on your current version I'd suggest using your current build) with success, proceed with a data wipe in recovery and noticed that the "dm-verity verification failed...." message is now gone and now that bottom area of the screen has information about applying Multi-CSC.
Restart the phone, set up as normal and go straight for the software update. My phone downloaded and installed the update perfectly! For safety just boot into recovery and do a full wipe again, and there you have it!
The stock firmwares for RETAIL SM-N910V are here: http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937
Click to expand...
Click to collapse
Thank you for reporting back with what worked for you. I've tried following the same steps you took, but after flashing the full BOG5 firmware and doing a data wipe and then doing basic setup on my phone, the OTA is still failing, Error Code: 404. I'll try again, but so far no success. Still stuck on the buggy 5.0.1, the version where you can't flash back to 4.4.4....

Keiller said:
Thank you for reporting back with what worked for you. I've tried following the same steps you took, but after flashing the full BOG5 firmware and doing a data wipe and then doing basic setup on my phone, the OTA is still failing, Error Code: 404. I'll try again, but so far no success. Still stuck on the buggy 5.0.1, the version where you can't flash back to 4.4.4....
Click to expand...
Click to collapse
I am sorry to hear that this didn't work for you. But it appears we're both getting different error codes. Does your recovery display issues with dm-verity failing? I think this was part of my problem in the first place.

traceestarr said:
I am sorry to hear that this didn't work for you. But it appears we're both getting different error codes. Does your recovery display issues with dm-verity failing? I think this was part of my problem in the first place.
Click to expand...
Click to collapse
You're right, I thought I had seen that message earlier in the week while trying to get the OTA for 5.1.1 to work, but I didn't write it down. Your description of symptoms matched mine so well I figured it had to be the same issue or something so similar that running through the same process would work for me too.
I may take the phone into Verizon to show them the update fail and see if they are willing to do anything for me....
Glad you got yours up and running, but I am just a little bit jealous

Keiller said:
You're right, I thought I had seen that message earlier in the week while trying to get the OTA for 5.1.1 to work, but I didn't write it down. Your description of symptoms matched mine so well I figured it had to be the same issue or something so similar that running through the same process would work for me too.
I may take the phone into Verizon to show them the update fail and see if they are willing to do anything for me....
Glad you got yours up and running, but I am just a little bit jealous
Click to expand...
Click to collapse
I've found that most times the OTA update fails prior to rebooting to install the update and I get the 404 error I reported earlier. However, when it does make it to the point of doing the OTA update after reboot, after that fails, I get the same 410 error you reported, see attached, and I also the dm-verity fail message in recovery. Then after using Odin to install BOG5, the verity fail disappears, replaced by a Multi-CSC message, I do a complete data wipe/factory reset, set up my basic google account and try the OTA, which fails every time. But once the dm-verity fail is gone, I can try doing an update from external storage, which I've tried with the BOK3 5.1.1 zip file posted here: http://forum.xda-developers.com/not...id-5-1-1-according-to-website-t3290683/page20 However, this still fails to load.
At this point I'm pretty convinced that I some other issue with my phone. I found elsewhere that someone was able to take their phone into Best Buy and have them flash the 5.1.1 update for them via Kies. That is probably my next step.
But I wanted to share what I've tried in case anyone else is experiencing the same dead end or in the off chance that someone has found a solution.
Sure would love to see the full 5.1.1 BOK3 tar.md5 sometime before Marshmallow hits, pretty sure using Odin to install the update that way would work....

traceestarr said:
I am sorry to hear that this didn't work for you. But it appears we're both getting different error codes. Does your recovery display issues with dm-verity failing? I think this was part of my problem in the first place.
Click to expand...
Click to collapse
The full OTA for 5.1.1 was posted and I was able to update using Odin, following the instructions on this post: http://forum.xda-developers.com/not...nt/firmware-safe-upgrade-to-lollipop-t3313224
Just wanted to update this post with the solution which finally worked for me.

My Z2 force keep booting to blank screen with 'no command' written below an android.

First things first. I surrender. I'm a noob with android. I had windows phone previously and only now came to android.
Here's the scenario:
1. My z2 force was properly rooted with magisk and twrp. I followed the guide in xda only.
2. My device was brought from India so carriers like sprint, t-mobile are not applicable I think.
What I Did:
0. Wanted to unroot my device. So, I decided to first uninstall the modules in magisk that I had installed.
1. Tried to uninstall magisk modules and rebooted from the magisk application.
2. Got into Boot loop, so went to recovery mod and wiped everything. Hard reset was done.
3. Installed magisk app again and clicked uninstall to remove root. I wanted to install the latest security update. Update kept failing so I decided to unroot. I choose uninstall completely option.
4. Rebooted the phone manually after clicking uninstall in magisk manager. Using the 'root checker' app I checked if unrooting was successful but it said, 'root was not properly installed' or something like that. So, I installed magisk manager again and again uninstalled root completely.
5. Still same issue. Root checker said the same thing again. So, installed magisk manager again and this time I wanted to remove root using ES file manager as I saw in an online guide. But I couldn't give it root permission because it was not properly installed as said by root checker. So, I decided to root my phone properly but stupid me, clicked 'install' in magisk manager and chose the recommended option (don't remember exactly what it was). It downloaded magisk zip and did some changes and asked to reboot. After rebooting, my phone went straight to the black screen with an android icon and 'no command' written below it. It kept going there again and again.
6. I assume that is the recovery mode. I press volume up and power button and choose the wipe everything again(Like I did before) to hard reset phone. Wiping was successful but it still kept booting to that black screen.
Additional Info:
1. Phone wasn't carrier version. It was bought in India. It is running Oreo 8.0.
2. In bootloader menu : (Not stating all)
BL: MBM-3.0-nash_retail-641a15b-180306
Product/Variant: nask xt1789-06 64GB PVT
Console[NULL] :null
Tools Mode Config: DISABLED
Power OK
flashing_unlocked
Software Status : Modified
Transfer Mode : USB Connected.
3. Yes, Bootloader menu is accessible.
4. Choosing recovery mode in bootloader menu reboots phone and takes me to that blank screen I mentioned before.
5. Connecting to USB to my PC when in bootloader menu, it connects as 'Fastboot nash S'. ADB terminal says no devices found.
What I want:
1. Boot into OS.
2. Remove root completely so I can install system update.
Please help or offer suggestions as I do not have a secondary device with me. If I have to absolutely go to a service center, I will.

You should flash it back to stock.
You posted that your phone is nash xt1789-06 64GB PVT, you can grab the latest firmware here.
The flashing instructions are here in post #5, and any question you might have is most likely answered in that thread.
Just download the firmware, boot into bootloader mode, and follow the instructions.
FYI in fastboot mode adb commands don't work, it's fastboot. To verify that you're connected and ready type
Code:
fastboot devices
and you should see your serial# like you do in adb.
That should put you back to stock and good to go.

41rw4lk said:
You should flash it back to stock.
You posted that your phone is nash xt1789-06 64GB PVT, you can grab the latest firmware here.
The flashing instructions are here in post #5, and any question you might have is most likely answered in that thread.
Just download the firmware, boot into bootloader mode, and follow the instructions.
FYI in fastboot mode adb commands don't work, it's fastboot. To verify that you're connected and ready type
Code:
fastboot devices
and you should see your serial# like you do in adb.
That should put you back to stock and good to go.
Click to expand...
Click to collapse
Thank you for the reply. I figured it out and went ahead with it. But now, I'm not seeing the May security update. The device shows it has March update and that no other update is available. Any idea why? Also, root checker still says 'root not properly installed'. How to unroot completely? Thanks a lot!

Sparkzz27 said:
You should flash it back to stock.
You posted that your phone is nash xt1789-06 64GB PVT, you can grab the latest firmware here.
The flashing instructions are here in post #5, and any question you might have is most likely answered in that thread.
Just download the firmware, boot into bootloader mode, and follow the instructions.
FYI in fastboot mode adb commands don't work, it's fastboot. To verify that you're connected and ready type
Thank you for the reply. I figured it out and went ahead with it. But now, I'm not seeing the May security update. The device shows it has March update and that no other update is available. Any idea why? Also, root checker still says 'root not properly installed'. How to unroot completely? Thanks a lot!
Click to expand...
Click to collapse
Did you look to see if the May Security Update has been released for your specific device? When you downloaded the stock firmware did you look to see what month security patch it contained? Have you tried to perform a system update to see if you can OTA to the latest security patch?
Now, if you completely flashed back to stock then root is removed. Root checker says that because root access is not installed at all. Flashing back to stock removes any trace of root, IIRC.
Sent from my Moto Z2 Force using XDA Labs

Don't forget, if you followed the flashing instructions from the other post they were omitting the gpt.bin and bootloader. So if you didn't flash those then that's why you're probably not seeing any updates, you need to be on full stock all matched up. Just reflash the firmware you downloaded in its entirety. @fast69mopar is right, once you flash a new boot.img root is gone, and since you flashed back to stock it's definitely gone.

Sparkzz27 said:
Thank you for the reply. I figured it out and went ahead with it. But now, I'm not seeing the May security update. The device shows it has March update and that no other update is available. Any idea why? Also, root checker still says 'root not properly installed'. How to unroot completely? Thanks a lot!
Click to expand...
Click to collapse
If you flash with factory image you should be unroot completely and root checker will keep telling you "root not properly installed" if you are not rooted just ignore root checker if you not planning to be rooted.

Hi there I have a xt1789-06 I was not getting updates and flashed the first Oreo update from here https://mirrors.lolinet.com/firmware/moto/nash/official/RETAIL/
My phone now does the updates and everything works fine.
However I did try to flash a custom ROM and root I made a mistake and ended up both a hard brick, because I was on Oreo I thought that flashing the Oreo blank flash would rectify the problem, but it was not working so I tried flashing the N blank flash and it worked.
I've come from using Samsung phones so I'm use to Odin and have not used fastboot commands. After reading many threads I know what I had done was not decrypting my device which ended up with a hard brick I will in the future flash a custom ROM now I know a little bit more.
Blank flash files are here
https://mirrors.lolinet.com/firmware/moto/nash/blankflash/
Then once back to fastboot flash the flash all from the link at the top of my post.

41rw4lk said:
Don't forget, if you followed the flashing instructions from the other post they were omitting the gpt.bin and bootloader. So if you didn't flash those then that's why you're probably not seeing any updates, you need to be on full stock all matched up. Just reflash the firmware you downloaded in its entirety. @fast69mopar is right, once you flash a new boot.img root is gone, and since you flashed back to stock it's definitely gone.
Click to expand...
Click to collapse
Hi, sorry I was busy with work. I managed to use my phone that way. I didn't use the instructions in that post. Instead, I download flashallutilities (In how to return to stock post in xda for z2 force), then ran the batch file which did all the work. I noticed other problems too,
1. My Jio sim(4g LTE) does not show 'enhanced LTE mode' in options. Also when I call someone, it fails immediately saying 'call failed. try another method.' However, internet connection works from the sim. My other sim works fine for calls and data.
2. I'm seeing other keyboards in manage keyboards section. I don't recall seeing google pinyin input, zhuyin input, etc before. What's worse is my office's app shows option to switch to chinese version of the website for logging in. My language and time zone are set correctly though - English India and GMT +5:30.
3. The web browser I used before couldn't be found in the play store anymore. My launcher still shows the icon with a green arrow in left bottom of the icon to direct me to playstore to download it but playstore says item not found. The app name is simply 'browser'. I searched for it on desktop website too (without logging in), still couldn't find it. Guess it's a coincidence,
Also: Herehttps://www.getdroidtips.com/moto-z2-z2-play-z2-force-stock-rom/#Moto_Z2_Force_Android_80_Oreo_Firmware, the carrier global version says 'OCX' instead of 'OPX'. Any idead about that?

Sparkzz27 said:
Hi, sorry I was busy with work. I managed to use my phone that way. I didn't use the instructions in that post. Instead, I download flashallutilities (In how to return to stock post in xda for z2 force), then ran the batch file which did all the work. I noticed other problems too,
1. My Jio sim(4g LTE) does not show 'enhanced LTE mode' in options. Also when I call someone, it fails immediately saying 'call failed. try another method.' However, internet connection works from the sim. My other sim works fine for calls and data.
2. I'm seeing other keyboards in manage keyboards section. I don't recall seeing google pinyin input, zhuyin input, etc before. What's worse is my office's app shows option to switch to chinese version of the website for logging in. My language and time zone are set correctly though - English India and GMT +5:30.
3. The web browser I used before couldn't be found in the play store anymore. My launcher still shows the icon with a green arrow in left bottom of the icon to direct me to playstore to download it but playstore says item not found. The app name is simply 'browser'. I searched for it on desktop website too (without logging in), still couldn't find it. Guess it's a coincidence,
Also: Herehttps://www.getdroidtips.com/moto-z2-z2-play-z2-force-stock-rom/#Moto_Z2_Force_Android_80_Oreo_Firmware, the carrier global version says 'OCX' instead of 'OPX'. Any idead about that?
Click to expand...
Click to collapse
Your Z2 is a xt1789-06 correct? It's an international version, the flashall in the utilities zip from the return to stock thread is for US based phones, TMO and Sprint specifically. What was or wasn't flashed using that flashall I couldn't tell you, I don't have an international phone. That's why I linked to the post that deals with that version of the Z2 and has all the answers and links you need to sort your phone. Others in that thread might be better suited to help you along. This is the thread that deals with the xt1789-06.
As for calling and sim, might be related to how you flashed or simply an apn issue. You can go to network settings, mobile, access point names, and reset those to default. That should pull the apns from your sim so you'll have the correct apns.
As for keyboards and browsers, I don't know what is included in the international stock versions, but they are subject to change based on initial setup/default language and rom version. As for the OCX vs OPX, I'm not sure what the difference is. I know 'O' is for Oreo but for the rest I don't know. Maybe one is gsm one is cdma? I don't know. I do know that the thread I linked to will have more info and be able to help you better since it's for your version of the Z2. Sorry I can't help you more, but post any questions you have over there and they should be able to sort you out.

Bricked Galaxy A3 2017

Hello everyone, I decided to root my phone today. First I enabled OEM unlock and then installed TWRP, no problems with that. Then I tried to install CF autoroot through recovery and everything seemed fine. When I tried to boot up my phone it said something like integrity check failed and I had to do a factory reset to be able to even start the phone. I did not do that but tried to install official samsung oreo firmware through odin but it won't install, just fails. Then i got other error message saying "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The only thing I can do now is enter download mode and nothing else but odin does not let me flash anything. I'm desperate here so any suggestion would be great. Model is SM A-320FL btw. Sorry for my english and lengthy post

Jura_11 said:
Hello everyone, I decided to root my phone today. First I enabled OEM unlock and then installed TWRP, no problems with that. Then I tried to install CF autoroot through recovery and everything seemed fine. When I tried to boot up my phone it said something like integrity check failed and I had to do a factory reset to be able to even start the phone. I did not do that but tried to install official samsung oreo firmware through odin but it won't install, just fails. Then i got other error message saying "an error occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software". The only thing I can do now is enter download mode and nothing else but odin does not let me flash anything. I'm desperate here so any suggestion would be great. Model is SM A-320FL btw. Sorry for my english and lengthy post
Click to expand...
Click to collapse
What kind of error do you get in Odin?
Is it the one that says something like "SW Rev. check fail"?
If so than for me it worked to flash the bootloader and modem of Oreo and the after that i reinstalled the OS without any problems.

First it was just a red fail for BL, CSC and those other things and later it just won't even start. When I try to install TWRP it goes to half and stays there. Thanks for the suggestion though.

Jura_11 said:
First it was just a red fail for BL, CSC and those other things and later it just won't even start. When I try to install TWRP it goes to half and stays there. Thanks for the suggestion though.
Click to expand...
Click to collapse
Was your device from a carrier, if so, try to flash the firmware that your device came with. If you can't solve this, PM me, so that we can try to resolve this on Telegram, Discord etc. :highfive:

MartinYTCZ said:
Was your device from a carrier, if so, try to flash the firmware that your device came with. If you can't solve this, PM me, so that we can try to resolve this on Telegram, Discord etc. :highfive:
Click to expand...
Click to collapse
Thank you for the reply, I don't think it was from carrier, when I tried to flash firmware I downloaded latest firmware from my current carrier so I think that shouldn't be a problem. I'll contact you tomorrow because i'm just too tired now. And update, I can flash TWRP now if that is of any help.

It is solved now, thanks everyone for your help

Jura_11 said:
It is solved now, thanks everyone for your help
Click to expand...
Click to collapse
Hi. Glad to see you got this sorted, but it may be useful for other users to see what you did to resolve this.

Yes, how did you solved that.
Looking at two A320F I found one difference:
One has AP SWREV B:2 K:0 S:0
the other one (that makes trouble): AP SWREV B:3 K:1 S:1
What exactly does it mean.
Flashing with Odin gave me erros (on device, Odin just say "failed") depending on flashing BL (SW Rev Check failed )Bootlader Device: 3, binary: 2 , while flashing AP gives Kernel Rev check fail.
So, how to go on? I was able to flash TWRP, but not Stock (neither an old 6.0 nor 8.0).

Ok, solved it. Flashing stock will probably only work to same or newer versions, not for downgrade (at least not without any special tricks that I don't know).
After downloading the latest stock FW , odin passed.
Now I still have the problem, that I can't transfer data partion from one A3 to another one.
https://forum.xda-developers.com/showpost.php?p=78062070&postcount=71

My first error was that I downloaded wrong firmware for my phone and because of that odin gave me errors. Second error was that I tried to wipe data through advanced wipe, but I needed to format it by pressing format data button. After doing that I was able to flash official stock ROM, install TWRP and root my phone. User MartinYTCZ helped me greatly with this, big thanks to him again. :victory:

starbright_ said:
Ok, solved it. Flashing stock will probably only work to same or newer versions, not for downgrade (at least not without any special tricks that I don't know).
After downloading the latest stock FW , odin passed.
Now I still have the problem, that I can't transfer data partion from one A3 to another one.
https://forum.xda-developers.com/showpost.php?p=78062070&postcount=71
Click to expand...
Click to collapse
Can't you backup your internal storage on PC or SD card, contacts, messages, phone calls, settings on samsung account and apps and data with titanium backup? When I flashed stock ROM I lost all data from my phone so be careful with that.

Question Can't use OTA update or Smart Switch - fail at 25%

Hi! I got a Samsung Galaxy A52s 5g that i bought from a store as second hand. They give a 14 days waranty but I don't really have the time to send the phone to service.
My problem is this... The phone right now has android 12 one ui 4.0 with Android security patch level from march 1, 2022. I want to upgrade it to android 13, but everytime I try thru OTA it fails at 25% and comes back to original saying Failed to install update, contact a samsung service center. Or something similar.
I found on the web that updating thru Samsung Smart Switch should work, but for me it doesn't. It downloads 7.3 gb of updates, after that phone enters download mode and I get after some time a NOTICE on the computer that "failed to recognize software update mode" and instructs me to reboot device and try again. I even enabled USB debug mode and I get the same NOTICE on the computer. And after that I reboot phone from downloading mode and everything is back to original.
The phone was charged 50%+ everytime i tried, also I got enough rom memory, I checked. Changed usb cable to another USB on the laptop and I get the same result from Smart Switch.
Phone model is SM-A528B/DS. I will provide more info if needed.
What I can do to succesfully update the software on my A52s 5g? I searched on the web to no result to my Smart Switch error. Also I've seen that are alot of cases where thru OTA the phone fails at 25%, but either they succesfully updated thru Smart Switch or no response.
I want to try installing the official rom from sammobile but I really don't know what firmware I should pick.
Thank you in advance!

A528BXXS2DWB5

Unreal_Hawkz said:
A528BXXS2DWB5
Click to expand...
Click to collapse
Does it matter from what carrier did the phone come from? The baseband is different from the file that you posted. Or doesn't matter? Anyway, downloaded it, now i'm looking for a tutorial on how to flash the rom. Thanks!

Unreal_Hawkz said:
A528BXXS2DWB5
Click to expand...
Click to collapse
Can I use update from SD card from recovery mode? It's easier i guess.

I just flashed the rom you provided. Hurray! It works just fine with odin. If anybody got the same problem with their phone, flashing with odin does a great job!
God bless you Unreal_Hawkz!