Related
I've tried to debrand my phone by flashing open market firmware (XEO, Poland). I downloaded the newest version of Odin, flashed it but now my CSC under settings says OPV/OPV, OPV/EUX/OPV. OPV is my carrier's CSC, I'm wondering what that EUX is. I've looked it up on Google and it seems like I'm not alone, seems like Samsung changed something and older methods no longer work. The question is - will I still receive updates released for my carrier or I'm screwed for good? Phone INFO app says my active CSC is OPV. I'm running S20+ 5G (G986B) Exynos variant.
Same problem here, I've flashed it with XEO POLAND G986BXXU1ATBM firmware using Odin3 v3.14.1_3B_PatcheD, few minutes later it showed "PASS" and nothing changed. Same branded firmware after reboot..
It seems, that many more 'branded' CSCs are now part of Multi-CSC. For me, this is DTM (T-Mobile DE). It osed to not be part of multi-CSC but it is now part of OXM.
This means, that you can not force it anymore, as you already ARE having the exact same firmware with the 'branded' CSC. Just checked, OPV is in deed part of OXM now.
In the Ultra Section is a thread showing the CSCs belonging to OXM: https://forum.xda-developers.com/ga...galaxy-s20-ultra-g988b-firmwares-5g-t4060443/
I have not yet found out / gotten an answer from anybody how to change CSC. Samkey also is not supporting the S20 series ATM - dont know, if this will change.
Monnq said:
I've tried to debrand my phone by flashing open market firmware (XEO, Poland). I downloaded the newest version of Odin, flashed it but now my CSC under settings says OPV/OPV, OPV/EUX/OPV. OPV is my carrier's CSC, I'm wondering what that EUX is. I've looked it up on Google and it seems like I'm not alone, seems like Samsung changed something and older methods no longer work. The question is - will I still receive updates released for my carrier or I'm screwed for good? Phone INFO app says my active CSC is OPV. I'm running S20+ 5G (G986B) Exynos variant.
Click to expand...
Click to collapse
What I have worked out is that when you flash a multi-CSC firmware file you end running the CSC one letter earlier in the alphabet out of the. Available multi-CSC list
E.g. I had a VOD branded S105G and flashed BTU firmware, and ended up with TEL CSC
I also tried flashing BTU on an H3G branded A70 and ended up with EVF CSC
The original branded product CSC also never changes
---------- Post added at 11:32 AM ---------- Previous post was at 11:30 AM ----------
Andrino said:
Same problem here, I've flashed it with XEO POLAND G986BXXU1ATBM firmware using Odin3 v3.14.1_3B_PatcheD, few minutes later it showed "PASS" and nothing changed. Same branded firmware after reboot..
Click to expand...
Click to collapse
Enable Developer mode and set OEM Unlock to ON before trying to change CSC via ODIN Flash
This should not be necessary? Doesn't that trip Knox, despite original Samsung Firmware?
corwin_amber said:
It seems, that many more 'branded' CSCs are now part of Multi-CSC. For me, this is DTM (T-Mobile DE). It osed to not be part of multi-CSC but it is now part of OXM.
This means, that you can not force it anymore, as you already ARE having the exact same firmware with the 'branded' CSC. Just checked, OPV is in deed part of OXM now.
In the Ultra Section is a thread showing the CSCs belonging to OXM: https://forum.xda-developers.com/ga...galaxy-s20-ultra-g988b-firmwares-5g-t4060443/
I have not yet found out / gotten an answer from anybody how to change CSC. Samkey also is not supporting the S20 series ATM - dont know, if this will change.
Click to expand...
Click to collapse
Since now it's part of Multi CSC, does that mean I will receive updates faster? I can see other polish carrier's CSC are listed as single so I assume they are kind of separate firmware, am I right?
Honestly I do not know, if the respective CSC will be getting OTAs at the same time.
However, you can always flash manually with HOME_CSC, that is true.
corwin_amber said:
This should not be necessary? Doesn't that trip Knox, despite original Samsung Firmware?
Click to expand...
Click to collapse
Enable OEM unlock does not trip Knox. As long as you flash official Samsung firmware files in Odin Knox is never tripped
My own personal experience on S10 and above is you cannot flash a different CSC with OEM Unlock disabled
(Flash completes successfully but CSC doesn't change)
When changing from one e.g. branded csc to multi csc with the S10+, this worked fine without enabling oem unlock. Well, anyway. Flashing OXM multi CSC over OXM multi CSC will not change anything, right?
corwin_amber said:
When changing from one e.g. branded csc to multi csc with the S10+, this worked fine without enabling oem unlock. Well, anyway. Flashing OXM multi CSC over OXM multi CSC will not change anything, right?
Click to expand...
Click to collapse
I found that you have to be on a single CSC before flash to multi-CSC and also you don't always end up on the CSC you expected
e.g. Flash BTU on a VOD product and you end up on TEL CSC (one letter in alphabet below VOD) and not on BTU
did everyone succesed DEBRAND ?
i v got s20 ultra OPV(orange) and need XEO (official)
tak, poprzez samkey
Yes, with samkey
@0kti if you have any credits remain let me know please ( I will buy it )
I found link to our android com pl forum , thanks
Nope. Buy on ebay. It's cheap. 3 credits.
Tapatalk - SM-G986B
one credit please, somebody will share ?
raphaelx69 said:
one credit please, somebody will share ?
Click to expand...
Click to collapse
really lmao.. its literally a few bucks... chimera tool works great also but is a mpre expensive subscription but dont gotta kee0 buyin credits
I'm using an Israeli SIM so my CSC is ILO.
But I don't want any of the offers/menus to be in Hebrew I want them in English while keeping my ILO CSC for the native recording option on the dialer.
Is there any way to trick those apps ?
TnxAlot
No there isn't, apps such as these use the phones firmware to determine region, it cannot be changed manually, hence why people who import Samsung devices often cannot use Samsung Pay, your only option is to flash a firmware from your region, however keep in mind you can't flash Exynos firmware to Snapdragon or vice versa
TheInfiniteAndroid said:
No there isn't, apps such as these use the phones firmware to determine region, it cannot be changed manually, hence why people who import Samsung devices often cannot use Samsung Pay, your only option is to flash a firmware from your region, however keep in mind you can't flash Exynos firmware to Snapdragon or vice versa
Click to expand...
Click to collapse
What do you mean by "your only option is to flash a firmware from your region"?
I flashed a DBT (germany) OXM (multi-csc) ROM.
It took the CSC automatically from my SIM carrier I can't do anything about that or can I?
TnxAlot
rypz79 said:
I flashed a DBT (germany) OXM (multi-csc) ROM.
It took the CSC automatically from my SIM carrier I can't do anything about that or can I?
Click to expand...
Click to collapse
OXM takes the information from the SIM to determine CSC however if you flash a specific firmware that isn't Multi then I think your CSC ignores this, I'm not 100% certain however so I'd do a little research first, sorry I couldn't be of further assistance
I currently have the US s20Ultra unlocked model on ATT (don't foresee changing carriers). Currently I am missing features like VoLTE and VVM. What other features would I be missing if I stay on the unlocked firmware? Can I flash the ATT firmware to get those missing features? Can I flash back to unlock?
Thank you
What's the CSC on your device?
varcor said:
What's the CSC on your device?
Click to expand...
Click to collapse
I am not sure what I am looking for. Its currently on ATT/ATT.
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
My CSC: G988U1OYM1ATE4
garyHal said:
My CSC: G988U1OYM1ATE4
Click to expand...
Click to collapse
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
garyHal said:
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
Click to expand...
Click to collapse
You're most welcome. Yes, flashing back to unbranded won't be a problem. I don't think you will be able to retain the features if you go back to the unbranded firmware, it's not configured to allow full call feature functionality. Also, after flashing to the AT&T firmware you may need to contact their CSR for external programing. Good luck!
S20+ AT&T
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020.G986USQU1ATE6 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Raigar said:
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020SAOMC_SM-G986U-OYN_ATT_QQ_0023 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Click to expand...
Click to collapse
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
varcor said:
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
Click to expand...
Click to collapse
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Raigar said:
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Click to expand...
Click to collapse
Flashing Singtel Firmware won't work since it's configured for the Exynos SoC. Multi-SIM Devices have only regional Service Providers available, you don't have Singtel as an option in an AT&T device. Based on your situation I would consider one of two options. The first would be insert an AT&T SIM just for OTA updates. Not sure if you received an AT&T SIM when you purchased the device, if you didn't they're not hard to find. The second and likely best option is sell the device and purchase a Global Variant with a Snapdragon SoC, you'll receive updates regardless of your Service Provider. If it makes you feel any better there's lots of users in the same predicament. They want the Snapdragon device in regions selling mainly Exynos devices. Workarounds are in many situations are challenging,
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
itchyUnder said:
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
Click to expand...
Click to collapse
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
varcor said:
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
Click to expand...
Click to collapse
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
itchyUnder said:
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
Click to expand...
Click to collapse
Flashing ATT Dedicated Firmware would give you the best chance for additional call features ASSUMING your Ulocked Device is capable of incorporating those features. It should do the trick since the hardware is identical to an ATT device. I would head to an ATT Store to get a definitive answer. Samsung has made it more and more challenging to mix and match branded and unlocked devices with CSC or Firmware modifications. In many cases you won't know until you try. Users want their smartphones to be smart, to work perfectly in every situation but the major carriers use proprietary tools to hold clients hostage.
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
romano_ezzat said:
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
Click to expand...
Click to collapse
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
varcor said:
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
I misunderstanding
What a trick bro
It's a link for firmware updates
I need to know which one compatible with my note
And after flash will still unlocked?
Hi Everyone,
I'm from Australia and recently bought a SM-G781B off eBay...
Turns out it was a UAE variant and Samsung Pay is all messed up.
I've flashed the phone a few times now using ODIN, trying to get the right CSC correct for Australia (G781BXXU2CUB5) for either of the following CSC's;
XSA (Generic Australia), OPS (Optus), VAU (Vodafone), or TEL (Telstra).
The issue I have is all the Stock Firmware's I've download and flashed keeps registering my CSC as XME (Malaysia)...
Phone INFO app doesn't even detect any other CSC's in the package
I've tried downloading the correct Firmware packs from the following and none gives me the correct CSC for Australia;
https://samfrew.com/
https://www.sammobile.com/
https://samfw.com/
App: Frija Firmware
Does anyone know why this is happening, or can upload/direct me to correct firmware either XSA, OPS (Optus), VAU (Vodafone), or TEL (Telstra)?
I'm totally at a loss now...
Any help would be much appreciated, thanks heaps in advance.
from what I've read recently Samsung has stopped people being able to switch as of android 11.
maybe... I stress MAYBE according to your countryman Hugh Jefferys, if there's a lower version of firmware on the same binary number you might be able to downgrade and then that might mean you can switch CSC.
this is someone who's never even tried changing CSC telling you this so your own research is obviously the only thing to put some faith in.
good luck
XSG (UAE) firmware is part of the OJM multi CSC, whereas XSA/OPS/TEL are part of the OLM multi CSC. This means that it is not possible to simply flash XSA in Odin as the multi CSCs are different, you would first have to use the combination ROM to change from OJM to OLM and then you would be able to flash any OLM CSC firmware, whether that be Australia, Singapore, Malaysia, or Thailand. I'm an Aussie myself, I got my phone from JB Hi Fi but switched it to Thailand CSC since XSA updates are horrendously slow (Samsung Pay does still work on Thailand CSC as does VoLTE/VoWiFi). For your case though, I'm afraid you are out of luck in terms of changing the multi CSC with the combination ROM, if you are on One UI 3.1 then the bootloader version is U2 whereas the combination ROM bootloader version is U1, so you would not be able to flash it anyway. Also, I tried to flash the combination ROM while my bootloader was still on U1 because I wanted to change from OLM to OXM (Romania CSC) for fastest updates, but Odin was not allowing the flash first because of "please get the approval to flash factory images (pit)" which I fixed, then "please get the approval to flash factory images (abl)" at which point I gave up. So as I said before, sorry but I don't think there's a lot you can do Unless a U2 bootloader version combination ROM is leaked which may or may not happen and you can get around the Odin not allowing you to flash it issues, the phone will unfortunately be stuck on UAE firmware (unless there are other countries part of OJM which you could switch to for faster updates).
Hopefully this helps you.
I have the same model! I changed my CSC but for some reason chat features in messaging app doesn't work now..other than that, all's good..
Skhux said:
I have the same model! I changed my CSC but for some reason chat features in messaging app doesn't work now..other than that, all's good..
Click to expand...
Click to collapse
Your software version is was originally XSA, so you wouldn’t have any issues flashing it with XSA and defaulting to XSA instead of another region. The CSC will automatically default back to XSA.
Mine unfortunately defaults to Malaysia XME when flashed with XSA firmware.
FedoraMaster420 said:
XSG (UAE) firmware is part of the OJM multi CSC, whereas XSA/OPS/TEL are part of the OLM multi CSC. This means that it is not possible to simply flash XSA in Odin as the multi CSCs are different, you would first have to use the combination ROM to change from OJM to OLM and then you would be able to flash any OLM CSC firmware, whether that be Australia, Singapore, Malaysia, or Thailand. I'm an Aussie myself, I got my phone from JB Hi Fi but switched it to Thailand CSC since XSA updates are horrendously slow (Samsung Pay does still work on Thailand CSC as does VoLTE/VoWiFi). For your case though, I'm afraid you are out of luck in terms of changing the multi CSC with the combination ROM, if you are on One UI 3.1 then the bootloader version is U2 whereas the combination ROM bootloader version is U1, so you would not be able to flash it anyway. Also, I tried to flash the combination ROM while my bootloader was still on U1 because I wanted to change from OLM to OXM (Romania CSC) for fastest updates, but Odin was not allowing the flash first because of "please get the approval to flash factory images (pit)" which I fixed, then "please get the approval to flash factory images (abl)" at which point I gave up. So as I said before, sorry but I don't think there's a lot you can do Unless a U2 bootloader version combination ROM is leaked which may or may not happen and you can get around the Odin not allowing you to flash it issues, the phone will unfortunately be stuck on UAE firmware (unless there are other countries part of OJM which you could switch to for faster updates).
Hopefully this helps you.
Click to expand...
Click to collapse
Thanks for the detailed reply.
From what I’ve tested, I have no issues with flashing from XSG OJM Multi to XSA OLM Multi. You can do this provided the FIrmware security number is the same as your current revision. You can’t however flash to a lower security value. See image attached.
The current firmware security value at the moment is “2” running One UI 3.1, Android 11. We can’t downgrade to any security firmware version “1” types with Android 10. If we could, then you can use multiple methods to manually change the CSC .i.e through Google Dialer or IMEI trick.
All the Firmwares at the moment are still Muti regional, unfortunately there doesn’t seem to be a way to change the CSC manually even though they are Multi regional.
All XSA firmwares I’ve downloaded and flashed will keep defaulting to XME as that’s the default unless my original CSC was XSA to begin with for it to detect.
I think the only option at the moment is to use SAMKEY, unless someone comes with with a new Android 11 method...
The other option is to root the phone and ADB to change the CSC, however this would trigger and break KNOX securities.
I did check Samkeys update log and they state it’s supported now, this method wouldn’t trigger KNOX;
VERSION 3.63.9 (PLANET EARTH'S FIRST)
- Added support for G780F (Galaxy S20 FE) ALL BIT
- Added support for G781B (Galaxy S20 FE 5G) ALL BIT
- Fixed FAIL(16) on Slow PC's
- Fixed FAIL(20) on G780F
They’re actually up to VERSION 3.71.9 now.
Might be worth a try.
kuri_2k said:
I think the only option at the moment is to use SAMKEY, unless someone comes with with a new Android 11 method...
The other option is to root the phone and ADB to change the CSC, however this would trigger and break KNOX securities.
I did check Samkeys update log and they state it’s supported now, this method wouldn’t trigger KNOX;
VERSION 3.63.9 (PLANET EARTH'S FIRST)
- Added support for G780F (Galaxy S20 FE) ALL BIT
- Added support for G781B (Galaxy S20 FE 5G) ALL BIT
- Fixed FAIL(16) on Slow PC's
- Fixed FAIL(20) on G780F
They’re actually up to VERSION 3.71.9 now.
Might be worth a try.
Click to expand...
Click to collapse
I can confirm SamKEY works on One UI 3.1, unfortunately it is paid but it does work. You can get an account for cheap from eBay with 1 credit on it which is all you need to do the CSC change. Using it I was able to change from XSA to THL (with no data wipe at all which really surprised me).
kuri_2k said:
Your software version is was originally XSA, so you wouldn’t have any issues flashing it with XSA and defaulting to XSA instead of another region. The CSC will automatically default back to XSA.
Mine unfortunately defaults to Malaysia XME when flashed with XSA firmware.
Click to expand...
Click to collapse
Trust me you wouldn't want XSA firmware anyway, the updates are terribly slow for it for the S20 FE 5G (not sure about 4G), it tends to get security patches a month after they should've came out, for example it got the March security patch in April which is pretty awful imo. I think it's the slowest CSC in general for the G781B, if you're on OLM multi CSC you're much better off switching to THL where the updates are a lot faster.
kuri_2k said:
Thanks for the detailed reply.
From what I’ve tested, I have no issues with flashing from XSG OJM Multi to XSA OLM Multi. You can do this provided the FIrmware security number is the same as your current revision. You can’t however flash to a lower security value. See image attached.
The current firmware security value at the moment is “2” running One UI 3.1, Android 11. We can’t downgrade to any security firmware version “1” types with Android 10. If we could, then you can use multiple methods to manually change the CSC .i.e through Google Dialer or IMEI trick.
All the Firmwares at the moment are still Muti regional, unfortunately there doesn’t seem to be a way to change the CSC manually even though they are Multi regional.
All XSA firmwares I’ve downloaded and flashed will keep defaulting to XME as that’s the default unless my original CSC was XSA to begin with for it to detect.
Click to expand...
Click to collapse
That's interesting, I didn't think it was possible to change between multi CSCs like this without the combination ROM (how you were able to switch from OJM to OLM). If you try to switch to an OXM multi CSC such as DBT or ROM from OLM multi CSC, what happens? Does it work? I'll be honest I never tried it myself but didn't have the motivation to try it anyway as I heard it wouldn't work.
FedoraMaster420 said:
That's interesting, I didn't think it was possible to change between multi CSCs like this without the combination ROM (how you were able to switch from OJM to OLM). If you try to switch to an OXM multi CSC such as DBT or ROM from OLM multi CSC, what happens? Does it work? I'll be honest I never tried it myself but didn't have the motivation to try it anyway as I heard it wouldn't work.
Click to expand...
Click to collapse
Hi There,
Yes, im sure it works provided the security firmware version is the same as I mentioned above.
I also changed to BTU to test.
I can't test for you any longer as I've returned the device for a refund. Will go buy an AUS XSA Variant.
Attached are the images of my original and changed firmware for your reference.
kuri_2k said:
Hi There,
Yes, im sure it works provided the security firmware version is the same as I mentioned above.
I can't test for you any longer as I returned the device for a refund. Will buy an AUS XSA Variant.
Attached are the images of my original and changed firmware for your reference.
Click to expand...
Click to collapse
That's very interesting, when you get the XSA variant can you try and see if you are able to flash a CSC such as ROM or DBT on the phone successfully using Odin? I would love to know if it was possible for this to work or not, I'm on THL myself after changing from XSA and did not think it was possible to switch to a different multi CSC (from OLM to OXM).
FedoraMaster420 said:
I can confirm SamKEY works on One UI 3.1, unfortunately it is paid but it does work. You can get an account for cheap from eBay with 1 credit on it which is all you need to do the CSC change. Using it I was able to change from XSA to THL (with no data wipe at all which really surprised me).
Click to expand...
Click to collapse
Wish I tried it before returning the device. The Australian stock only has 6GB RAM and no dual-sim....
kuri_2k said:
Wish I tried it before returning the device. The Australian stock only has 6GB RAM and no dual-sim....
Click to expand...
Click to collapse
Yeah that's true no 8GB variant sold here as far as I know not even on the Samsung website and we don't even get eSIM support either
Is there an update/workaround on this issue?
are there any methods that work without samKey?
Noticed that the dialer app that was once able to record calls, is now recording only me talking, since the latest OTA updates on the stock firmware (updated to oneUI 3.1 and Android 11).
I'm also on XSG (OJM) firmware and want to change CSC to enable call recording on galaxy S20 FE 5G (model G781B).
Would love to know how can it be done.
*my software info is attached in the screenshot
thanks!
VM57 said:
Is there an update/workaround on this issue?
are there any methods that work without samKey?
Noticed that the dialer app that was once able to record calls, is now recording only me talking, since the latest OTA updates on the stock firmware (updated to oneUI 3.1 and Android 11).
I'm also on XSG (OJM) firmware and want to change CSC to enable call recording on galaxy S20 FE 5G (model G781B).
Would love to know how can it be done.
*my software info is attached in the screenshot
thanks!
Click to expand...
Click to collapse
I'm sure by now you've already sorted this, but this is for future people with a need to change CSC
The SamFW FRP Tool can tell you which CSCs are available on your phone already, and can automatically have the CarrierPreConfig service trigger a CSC update. Only need to enable USB Debugging. No root, no reinstall.
But if your phone doesn't have the CSC you need already, download Frija, or another firmware download tool, you'll be able to download and install an OXM Multi CSC firmware (such as XSA, OPS, TEL or VAU), and install it via ODIN tool.
Be sure to select HOME_CSC to keep your data, and backup first.
Peterepeat87 said:
I'm sure by now you've already sorted this, but this is for future people with a need to change CSC
The SamFW FRP Tool can tell you which CSCs are available on your phone already, and can automatically have the CarrierPreConfig service trigger a CSC update. Only need to enable USB Debugging. No root, no reinstall.
But if your phone doesn't have the CSC you need already, download Frija, or another firmware download tool, you'll be able to download and install an OXM Multi CSC firmware (such as XSA, OPS, TEL or VAU), and install it via ODIN tool.
Be sure to select HOME_CSC to keep your data, and backup first.
Click to expand...
Click to collapse
Thank you, mate! I have just registered here specifically to thank you You really were the last random post I found in the internet that helped me to solve this unflashable state of my S9. Thank you again! <O
As the title suggests, I was able to successfully change the CSC on my factory unlocked (unbranded) Fold 3 - F926B/DS bought in Germany with OXM firmware having Android 13 & one UI 5.0 from EUX to INU csc using SamFW Tool v3.31 in hardly 2-3 mins. Kindly note that I also looked into other options to do this like Samkey tool (paid service) and alliance shield app (which doesn't work anymore) etc before engaging with the SamFW Tool as none were simple/working with no complications whatsoever involved.
My main objective to change the CSC was to enable call recording and couple of other features (including some pleasant surprises listed in the end of the post) which were available in the INU csc with little to no hassle. The process was pretty simple, straight forward and most importantly, FREE . It DOESN'T require any factory reset, flashing of roms or wiping cache partition before or after the process.
The step by step guide process which worked for me is as follows:
STEP 1: Click here - SamFW Tool Download - to download the latest version of SamFW tool.
STEP 2: Remove the sim card and connect your phone to a computer and make sure the phone's drivers are installed.
STEP 3: Unzip the downloaded file. Right click on the file SamFwFRPTool.exe and 'Run as Administrator'.
STEP 4: After the software opens, make sure your phone is detected before proceeding. If its detected, click on ADB tab in the software.
STEP 5: In your phone, go to developer options and enable 'usb debugging'.
STEP 6: In your phone, open phone dialer and type *#0*# to get into test mode. Leave the phone unlocked and keep it aside now.
STEP 7: Click on 'Change CSC' button in the ADB tab of the tool. Now the tool will connect to your phone, check and list the available CSCs which your phone model supports as shown in the pic attached.
STEP 8: Choose a CSC which you wish to change to from the drop down menu in the pop-up window as shown in the pic attached.
NOTE: The tool also has the option to force the phone to accept a CSC not listed/supported as well by manually entering the same. However, I would not recommend doing it if you really wish to get OTA updates and also to evade any unforeseen issues. I must admit, I haven't frankly tried this and do not know what lies in the pandora box to be honest.
STEP 9: After choosing the CSC from the drop down, the tool quickly connects to the phone, changes the CSC and restarts the phone.
STEP 10: After the phone restarts, unlock the phone using your pin/password, insert your simcard, check the change of CSC in software information, disconnect the phone from the computer and also disable the 'usb debugging' in the developer options.
That's it! All done. Phone restarts with the new chosen CSC and the related features will now be active!
BONUS: There is also an option in the ADB tab in the SamFW Tool named 'Battery information' which gives the complete information of the battery status including the 'charge/discharge cycles' along with its temperature, voltage etc. like in the pic attached. Do note that the information shown in the 'Genuine battery' section isn't correct for some reason and always shows as 'NO' for any phone with/without genuine battery.
With my choice of INU csc the following major changes/surprises were noticed over the EUX:
1. Call recording and a couple of other INU specific features are now enabled (google for more info on what csc enables what features).
2. Not sure why but Battery backup has increased significantly after the csc change to INU. SOT (Screen On Time) which has fallen to 3-4 hrs after the OTA update to One Ui 5.0 & Android 13 is now back to 5-7hrs or more.
3. RAM management has definitely got better. With EUX csc it used be around 5-6GB during standby and now its always around 3-4GB when the phone is idle.
4. Instead of 4G or 4G+, now it shows LTE and LTE+.
5. Mobile data speed has increased both in 5G (Jio True5G network) and in LTE+ when compared to EUX CSC.
6. 5G signal strength has improved drastically. Signal loss or switching to 4G+/LTE+ is very low now.
7. 5G to 4G/LTE switching while calls (VoLTE/VoNR) is more seamless now. Latching back onto 5G network after a call is a breeze now unlike earlier with EUX csc.
8. Phone definitely got faster for some reason. Can very much feel the difference when switching between apps, multi-tasking, even opening/closing apps and other day-to-day tasks.
etc...
Haven't tested whether the OTA updates will still get pushed after the change in CSC yet, as my phone is already updated to the latest patch as I write this. Should absolutely work IMO as long as we choose a CSC which the phone supports but in any case will update the thread once the next update via OTA is available/pushed by Samsung.
Disclaimer: Please be informed that all the above information is purely based on experience of using the tool for changing CSC only which worked well for me with my Fold 3. Cannot take responsibility if it doesn't work for you.
Does it work for Fold 4. Want to change CSC from Korean Region to INU (India). Please guide
Sorry, haven't tried it on Fold 4. Logically it shud work, I guess. There is no harm in connecting n checking what CSCs does ur model supports using the tool IMO.
Tried out but it does not work. It shows only the Korean csc. Even that seems to be not changing
Oh k. I think the tool works, else u wudnt b seeing the CSC which ur phone supports.
I have checked sources in the web as well on this and looks like Fold 3 or 4 with Korean CSC supports only CSC from Korea.
I guess u can still force a CSC on to it replacing the Korean one but thats too risky as u will b missing OTA updates and im not aure wat all things it will mess up.
Awesome! It works and it doesn't wipe the device. I just switched from G975U VZW to CCT without any issues.
BlueTR said:
Awesome! It works and it doesn't wipe the device. I just switched from G975U VZW to CCT without any issues.
Click to expand...
Click to collapse
Happy to hear that. BTW I also got samsung pay/wallet to work as well by installing its apk file today after changing the system language to a local one specific to the changed CSC i.e., English (India) for INU CSC in my case.
I confirm that it is working on a stock android 13! Great tool!
(It worked on the second try though )
Has anyone tired it on a Fold 4, Mine is XAA and I want to convert it to INU. Haven't been abe to do it as yet.
Let me know if someone finds a way, mine is a US version and I want to convert it to the India CSU.
Thanks in advance
unexpected0ne said:
I confirm that it is working on a stock android 13! Great tool!
(It worked on the second try though )
Click to expand...
Click to collapse
Good to know! Just out of curiosity, u tried this on a Fold 3 or Fold 4?
srikanth.addala said:
Good to know! Just out of curiosity, u tried this on a Fold 3 or Fold 4?
Click to expand...
Click to collapse
Fold 3, latest official android 13
unexpected0ne said:
Fold 3, latest official android 13
Click to expand...
Click to collapse
Oh great. Getting otas after the change?
Does OTA work after change?
Hello, can somebody please briefly summerise the options for switching the CSC/Firmware?
I read other threads and this one and now am confused which method actually would work for me.
My situation: i have a Samsung A52s 5G purchased from Deutsche Telekom in Germany, sold separately, not bundled with a contract.
And i am having a contract with a different carrier on a different network, but a german SIM card.
My phone is configured all english, and i need to keep that.
Because of assumed network optimisations and the problem of delayed updates of "branded" phones, i would like to convert the phone from the current CSC of DTM to the DBT using fimrware (A528BXXS1DVL2/A528BOXM1DVK5/A528BXXU1DVK5/A528BXXS1DVL2), which i hope would link me to updates directly provided by Samsung.
I found "https://forum.xda-developers.com/t/...official-firmware-all-samsung-device.2697238/" and "https://forum.xda-developers.com/t/...-multi-csc-codes.4436853/page-5#post-87485577 ", but i am not sure whther the methods described there only apply for UPDATING (within the same CSC) the phone with non-OTA methods, or whether that also covers SWITCHING the CSC?
In the end i have two questions:
1) So far i believed that "simply" putting an official stock Samsung firmware (multi CSC in my case, containing the DBT, but apparently NOT containing the DTM) would bring me there.
But then i read that this might not be suffficient. Instead i also would have to switch the CSC in my Phone's config, which apparently would require purchasing a license for a Samkey unlock code.
Because otherwise i would not receive any OTA updates once i switched just the firmware.
Is that actually true?
I would prefer not to have to buy a Samkey...
And to make the confusion even bigger: now i read, SamFw Tool would also be an option?
But: is that trustworthy? And: from posts of some of you: this might even obsolete to switch the firmware, do i understand that right?
2) If switching firmware still is required: would using Odin/Heimdall be the only option to switch the firmware, or would adb sideloading do the same job as well? I am asking because i don't have access to a windows machine.
Would be so great if someone of you could untangle my confusion a bit, thank you.
MarkoParkovic said:
Does OTA work after change?
Click to expand...
Click to collapse
Did not automatically receive the OTA updates with the recent DVL9 update. However, tried a work around to change the CSC back to EUX via the same tool (which is a 2 min task) to check if I can get OTA again.
And yes it worked! immediately after changing the OTA to its home CSC, was able to see OTA in the updates section of the phone. So, I updated the phone to the latest version (DVL9) and then changed the CSC back to INU after the update . All is well and quick! .
very nice i changed sfr to tur but netflix and always on display app not shown google play so unsupported why idk
burc ugur said:
very nice i changed sfr to tur but netflix and always on display app not shown google play so unsupported why idk
Click to expand...
Click to collapse
May be TUR csc has restricted options/features. In my example after I changed to INU csc (India one) all the India related options got automatically activated like call recording, spam filter, samsung pay using cards etc etc. which weren't available with the EUX csc before the change.
srikanth.addala said:
May be TUR csc has restricted options/features. In my example after I changed to INU csc (India one) all the India related options got automatically activated like call recording, spam filter, samsung pay using cards etc etc. which weren't available with the EUX csc before the change.
Click to expand...
Click to collapse
Any potential issues using INU csc in the UK? I use Samsung pay already but native call recoding would be really useful for me
srikanth.addala said:
May be TUR csc has restricted options/features. In my example after I changed to INU csc (India one) all the India related options got automatically activated like call recording, spam filter, samsung pay using cards etc etc. which weren't available with the EUX csc before the change.
Click to expand...
Click to collapse
edit: excuse me you have play protect certificate? i changed csc samfw topl but now i don't have play protect certificate. Therefore not shown Netflix.
you have this? if you have how can i fix certificate.
burc ugur said:
edit: excuse me you have play protect certificate? i changed csc samfw topl but now i don't have play protect certificate. Therefore not shown Netflix.
you have this? if you have how can i fix certificate.
Click to expand...
Click to collapse
Might be worth clearing cache and data from Google play services see if that helps. Having the same device with 2 different cscs might have confused Google
Edit
Any reason your Google play store is out of date or is it connected to your original issue