Hi,
recently i bought Redmi Note 9 Pro ( indian ver ).
after while its come to disconnected when i charge in rapidly mod ( 33watt )
0% -40% there is no problem, when charging from 40%-55% it gets disconnected. after that when plugged it again it charges normally
i have changed my cable with normal (18 watt ) it doesn't disconnect
but when i change cable with same as orginal ( for charge with 33watt ) and its continue to disconnect
any problem reported related to this ? any solution ?
I don't think it is because of faulty port, nor a faulty cable. Lastly, this usually happens only when the battery is from 40%-55℅. Could it be a software problem? Any reply is appreciated!
OS - MIUI 11.0.4
I have done the basic trouble shooting like hard reset and recalibrated the battery also.
tnq for helping
i have same problem
shehabmedhat said:
i have same problem
Click to expand...
Click to collapse
Stock Or custom?
Traison said:
Stock Or custom?
Click to expand...
Click to collapse
Stock
shehabmedhat said:
Stock
Click to expand...
Click to collapse
It is a hardware related issue, there is nothing much to do about it.
Same problem here! (Redmi Note 9 Pro Global version)
i also facing this issue, any solution for this?
Exactly the same issue.
Workaround would be to charge phone in switched off state.
It worked for me and charger the didnt keep connecting and disconnecting.
Do a power cycle
I had the same issue. I did complete power cycle.
Drained my battery to 0% then charged it upto 100% using turbo charge the whole time didn't saw the issue happening anymore.
Will update here if I see the issue any further.
If it happens then service center is the only option
prashantdevani said:
i also facing this issue, any solution for this?
Click to expand...
Click to collapse
after facing this i return my phone and order same model . new one also come with same issue.
then i think it was problem with USB cable so i order boat a400 type c fast charging cable up to 3A support. now i am not face this problem any more and cool thing is its charging speed same as original cable :fingers-crossed:.
Cable Name : boAt Indestructible USB Type-C to USB-A 2.0 Male Cable for Type C Phones, 1 Meter (3.3 Feet) -(Black)
cable purchased from amazon.in.
prashantdevani said:
after facing this i return my phone and order same model . new one also come with same issue.
then i think it was problem with USB cable so i order boat a400 type c fast charging cable up to 3A support. now i am not face this problem any more and cool thing is its charging speed same as original cable :fingers-crossed:.
Cable Name : boAt Indestructible USB Type-C to USB-A 2.0 Male Cable for Type C Phones, 1 Meter (3.3 Feet) -(Black)
cable purchased from amazon.in.
Click to expand...
Click to collapse
I also replaced the phone, issue still persist.
Did u find any difference in charging speed for the new cable. Kindly post updates
prashantdevani said:
after facing this i return my phone and order same model . new one also come with same issue.
then i think it was problem with USB cable so i order boat a400 type c fast charging cable up to 3A support. now i am not face this problem any more and cool thing is its charging speed same as original cable :fingers-crossed:.
Cable Name : boAt Indestructible USB Type-C to USB-A 2.0 Male Cable for Type C Phones, 1 Meter (3.3 Feet) -(Black)
cable purchased from amazon.in.
Click to expand...
Click to collapse
that cable is rated for 3A max so its never gonna turbo charge the device at full speed. what u need is a 6A rated usb type C
Traison said:
I also replaced the phone, issue still persist.
Did u find any difference in charging speed for the new cable. Kindly post updates
Click to expand...
Click to collapse
@Traison no, i compared both cable charging speed it was same. its both charging speed 3000mA to 3500mA but one thing i noticed.
i am seeing this 'rapidly charging' or 'turbo charging' message in lock screen when charging phone using original cable.
and this 'fast charging' message in lock screen when charging phone using boat cable
---------- Post added at 04:23 PM ---------- Previous post was at 04:12 PM ----------
iamparven said:
that cable is rated for 3A max so its never gonna turbo charge the device at full speed. what u need is a 6A rated usb type C
Click to expand...
Click to collapse
@iamparven i thing Redmi note 9 pro max charging speed support up to 3A to 4A but i am not sure, i charged my phone using both cable (boat a400 & original cable) and both cable charging my phone as same speed 3000mA to 3500mA.
prashantdevani said:
@Traison no, i compared both cable charging speed it was same. its both charging speed 3000mA to 3500mA but one thing i noticed.
i am seeing this 'rapidly charging' or 'turbo charging' message in lock screen when charging phone using original cable.
and this 'fast charging' message in lock screen when charging phone using boat cable
---------- Post added at 04:23 PM ---------- Previous post was at 04:12 PM ----------
@iamparven i thing Redmi note 9 pro max charging speed support up to 3A to 4A but i am not sure, i charged my phone using both cable (boat a400 & original cable) and both cable charging my phone as same speed 3000mA to 3500mA.
Click to expand...
Click to collapse
Do cycle with a stopwatch to perfect time measurement. make sure ur device is on, when powered off its always 18watt
iamparven said:
Do cycle with a stopwatch to perfect time measurement. make sure ur device is on, when powered off its always 18watt
Click to expand...
Click to collapse
@iamparven i have Redmi note 9 pro max 8 GB variant and 30 watt charger. i measured charging speed while my phone is on using '
Battery Charging Monitor - Ampere Meter' https://play.google.com/store/apps/details?id=com.tofabd.batteryanalyzer&hl=en_IN&gl=US this app.
shehabmedhat said:
i have same problem
Click to expand...
Click to collapse
Which problem you facing and which rom you using stock or custom
---------- Post added at 09:15 AM ---------- Previous post was at 09:13 AM ----------
iamparven said:
that cable is rated for 3A max so its never gonna turbo charge the device at full speed. what u need is a 6A rated usb type C
Click to expand...
Click to collapse
Yeah I need it super turbo charger
---------- Post added at 09:15 AM ---------- Previous post was at 09:15 AM ----------
Traison said:
I also replaced the phone, issue still persist.
Did u find any difference in charging speed for the new cable. Kindly post updates
Click to expand...
Click to collapse
I change my cable but I don't see any difference between charge speed
---------- Post added at 09:16 AM ---------- Previous post was at 09:15 AM ----------
iamparven said:
Do cycle with a stopwatch to perfect time measurement. make sure ur device is on, when powered off its always 18watt
Click to expand...
Click to collapse
Really it's madness
Same problem here bro. Any solutions? do I need to replace my mobile??
Vishnubkz said:
Same problem here bro. Any solutions? do I need to replace my mobile??
Click to expand...
Click to collapse
No use :crying:
I'm having the same problem..... Connecting and disconnecting....
Vishnubkz said:
Same problem here bro. Any solutions? do I need to replace my mobile??
Click to expand...
Click to collapse
This problem is with everyone.... Redmi is useless brand first time in my lifetime I choose redmi
Related
Will using a fast charger hurt the phone?
I have been using my note edge charger but will it cause issues?
Always only use the charger that comes with the phone, other chargers may cause issues (damage battery, damage the phones charging port, etc.). its not gonna be really fatal if the charger is fine, but its reccomended to only use the charger what came with the device.
---------- Post added at 12:00 PM ---------- Previous post was at 11:57 AM ----------
And cus the z5p doest support fast charging i wouldt use a fast charger.. (i am not sure does it support) i think it did or then not lol but dont use dat!
Cool thanks, shame the UK version does not come with a plug!
I'm using anker powerport+ ant it's working fine.
It is a qc qualcomm 3.0
by the way... z5p has a qualcomm sd810 so... z5p support qualcomm qc 2.0 and 1.0
dvdmike said:
Cool thanks, shame the UK version does not come with a plug!
Click to expand...
Click to collapse
Yeah pls press the thank you button if i was helpful lol..
dvdmike said:
Cool thanks, shame the UK version does not come with a plug!
Click to expand...
Click to collapse
Sony xperia z5 premium is totally Qualcomm fast charge 2 capable.
I use my note 4 fast adaptive charger without any issues and it is fast charing as hell. This is because the phone support Qualcomm quick charge (which is a open standard from Qualcomm and Samsung use the same).
Even if you want you can't damage your battery because a controller inside the phone or the battery is controlling the charge, checking multiple parameters to avoid battery explosion.
It is simple - you can use even 5A charger, but the controller inside the phone will allow only safe charge rates.
So at the end, Yes you can use your note edge charger without any issues!
masaforce said:
Yeah pls press the thank you button if i was helpful lol..
Click to expand...
Click to collapse
Thought I did press it
r0gger said:
Sony xperia z5 premium is totally Qualcomm fast charge 2 capable.
I use my note 4 fast adaptive charger without any issues and it is fast charing as hell. This is because the phone support Qualcomm quick charge (which is a open standard from Qualcomm and Samsung use the same).
Even if you want you can't damage your battery because a controller inside the phone or the battery is controlling the charge, checking multiple parameters to avoid battery explosion.
It is simple - you can use even 5A charger, but the controller inside the phone will allow only safe charge rates.
So at the end, Yes you can use your note edge charger without any issues!
Click to expand...
Click to collapse
Damn I just traded it in with my note edge
Just buy the Sony charger I did even I have a 2.4a charger for tablets and a Samsung fast charger...
Sent from my SO-03H using Tapatalk
Anyone know what the fastest possible charging time from about 10% to fully charged would be? And with what charger?
-xirt0n
Mine came with the UCH10 charger and am using my short Sony usb cable that came with my headset (EC300). I went from 4% to 100% in 1 hour and 35 mins. I also tested with the Tronsmart quick charge 2.0. It went from 6% to 100% in 57 mins. Both chargers support the 5v/9v/12v output. Does anyone have a qc2.0 20v charger? I wonder if it will be faster?
I don't fully understand why, but I've read that due to our phone using USB-C for charging, that I should probably just use the OEM cable and charger my phone came with. I have an LG G5 charger and cable laying around, but the specs are slightly different than the 10's. Would it damage my phone to use that as a spare charger? Also, can somebody give me a simple explanation why USB-C is delicate for quick charging?
rebelde80 said:
..can somebody give me a simple explanation why USB-C is delicate for quick charging?
Click to expand...
Click to collapse
No one can explain your statement due to it is simply nonsense..
And secondary - which charging do you intend to utilize: Qualcomm QC technology or conventional charging - when asking about different adaptors..?
Sent from quite brutal hTc 10 ..
jauhien said:
No one can explain your statement due to it is simply nonsense..
And secondary - which charging do you intend to utilize: Qualcomm QC technology or conventional charging - when asking about different adaptors..?
Sent from quite brutal hTc 10 ..
Click to expand...
Click to collapse
I'll rephrase the question, not statement, in a way that might be easier for you to understand. Here it goes: Can somebody give me a simple explanation as to some people allege USB-C is not compatible with Qualcomm QC?
Also, since my question is about quick charging, and since the LG G5's charger uses quick charging, that's the kind of charging I want to do.
rebelde80 said:
I'll rephrase the question, not statement, in a way that might be easier for you to understand. Here it goes: Can somebody give me a simple explanation as to some people allege USB-C is not compatible with Qualcomm QC?
Also, since my question is about quick charging, and since the LG G5's charger uses quick charging, that's the kind of charging I want to do.
Click to expand...
Click to collapse
the usb-c standard plug has not enoufg physical connections available that are needed for fast charging.
HTC uses some physical connections to enable quickcharge, wich is not standard.
source: some (?google employee?) guy
---------- Post added at 03:02 PM ---------- Previous post was at 02:59 PM ----------
basdejongg said:
the usb-c standard plug has not enoufg physical connections available that are needed for fast charging.
HTC uses some physical connections to enable quickcharge, wich is not standard.
source: some (?google employee?) guy
Click to expand...
Click to collapse
personally i bought some Aukey PA-T9 chargers, and they work perfectly with the 10
basdejongg said:
the usb-c standard plug has not enoufg physical connections available that are needed for fast charging.
HTC uses some physical connections to enable quickcharge, wich is not standard.
source: some (?google employee?) guy
---------- Post added at 03:02 PM ---------- Previous post was at 02:59 PM ----------
personally i bought some Aukey PA-T9 chargers, and they work perfectly with the 10
Click to expand...
Click to collapse
That's exactly the answer I was looking for! If you have an LG G5 charger, would you feel comfortable using it with your HTC 10?
rebelde80 said:
That's exactly the answer I was looking for! If you have an LG G5 charger, would you feel comfortable using it with your HTC 10?
Click to expand...
Click to collapse
i would check the output voltage, htc can accept ~5volt ~9volt and ~12volt.
if you have a good usb-a to usb-c cable (stock or somethink like aukey (NOT ANKER)) i would feel comfortable becouse the phone and the charger communicate with eachother on what voltage to charge.
basdejongg said:
if you have a good usb-a to usb-c cable (stock or somethink like aukey (NOT ANKER))
Click to expand...
Click to collapse
Eh? What's wrong with Anker USB A to USB C cables?
basdejongg said:
i would check the output voltage, htc can accept ~5volt ~9volt and ~12volt.
if you have a good usb-a to usb-c cable (stock or somethink like aukey (NOT ANKER)) i would feel comfortable becouse the phone and the charger communicate with eachother on what voltage to charge.
Click to expand...
Click to collapse
Ues please what is wrong with anker? I have a aukey charger and cable I'm returning because the both together won't charge at all my 10 but when changing to any other combo of charger and cable they all work fine.
Sent from my HTC 10 using XDA-Developers mobile app
Anker did a recall on their PowerLine type C cables. The rest are fine.
Sent from my HTC 10 using Tapatalk
DeXel55 said:
Anker did a recall on their PowerLine type C cables. The rest are fine.
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
To be even more precise, on just one model ID of their PowerLine USB C cables, the rest of their PowerLine USB C cables are fine.
Anker’s Powerline 3.1 Gen2 cable has a flaw that causes it to “remember” the charging voltage for a laptop that it’s plugged into, then accidentally provide that higher voltage to a phone unless it’s unplugged from the more powerful charging base. This can overload your phone and destroy it.
Anker has already replied with the following recall:
We are offering all of our PowerLine USB-C A8185011 users a full refund.
basdejongg said:
Anker’s Powerline 3.1 Gen2 cable has a flaw that causes it to “remember” the charging voltage for a laptop that it’s plugged into, then accidentally provide that higher voltage to a phone unless it’s unplugged from the more powerful charging base. This can overload your phone and destroy it.
Anker has already replied with the following recall:
We are offering all of our PowerLine USB-C A8185011 users a full refund.
Click to expand...
Click to collapse
Right, and that's a USB-C to USB-C cable. Not sure why you're recommending to stay away from Anker's USB-A to USB-C cables.
hi after update from 7.0 to 7.1.1 i have a probleme with charging.the phone some time not charge to explain the probleme in the notification bar the icon of battrey showing that my phone is charging but its not charge bcz at the home screen dont show (charge rapidly).the probleme begain at android 7.1.1 update.note that i dont do factory reset when i update to 7.1.1
what i try:
i wiped the cache in the phone and recovery not solve the probleme
i try cleaning the port usb note solve the probleme
i am sure my usb port in my nexus is not damaged bcz the Electricity is not interrupted in my phone during the charge
the cable is new and iam sure its not damaged
so can the update to 7.1.1 is the It is the reason of this probleme?any one have this probleme
tnx all
any help please
Hi,
are you using the default charger? Also try to install the Ampere app and see your current amperage. USB-C default is 3000 but personally i'm at 2300/2700
Pepe_The_Frog said:
Hi,
are you using the default charger? Also try to install the Ampere app and see your current amperage. USB-C default is 3000 but personally i'm at 2300/2700
Click to expand...
Click to collapse
i dont have the original charger.i buy a 5v/3.1A charger with cable type c the ampere app show 1100/900 some time show 540
znayver said:
i dont have the original charger.i buy a 5v/3.1A charger with cable type c the ampere app show 1100/900 some time show 540
Click to expand...
Click to collapse
Try to make few tests, screen off/on, with/without airplane mode etc.. Also try to find any running app and try to stop them. Leave the phone 10-15mins and tell me the min/max amperage.
Pepe_The_Frog said:
Try to make few tests, screen off/on, with/without airplane mode etc.. Also try to find any running app and try to stop them. Leave the phone 10-15mins and tell me the min/max amperage.
Click to expand...
Click to collapse
i stop all aplication and airplan mode now it show 1450/1500
znayver said:
i stop all aplication and airplan mode now it show 1450/1500
Click to expand...
Click to collapse
Seems better, screen off/on? also did u have any reference of the charger and the cable?
Personally with an USBC to C cable i can go up to 3A but to a type C to A i have only 1,5A or 1,7A max..
Pepe_The_Frog said:
Seems better, screen off/on? also did u have any reference of the charger and the cable?
Personally with an USBC to C cable i can go up to 3A but to a type C to A i have only 1,5A or 1,7A max..
Click to expand...
Click to collapse
my charger is normal not type c but the cable is type c..
Pepe_The_Frog said:
Seems better, screen off/on? also did u have any reference of the charger and the cable?
Personally with an USBC to C cable i can go up to 3A but to a type C to A i have only 1,5A or 1,7A max..
Click to expand...
Click to collapse
and at the ampere app it show:current usb max 3000ma
znayver said:
my charger is normal not type c but the cable is type c..
Click to expand...
Click to collapse
znayver said:
and at the ampere app it show:current usb max 3000ma
Click to expand...
Click to collapse
Seems clear now, i think that if the cable isn't type c, we can't get the 3A for charging the device.
with og cable i'm able to get 3A but with an USBC to A i'm stuck at 1,5~ ( http://imgur.com/a/LVgAi )
I think your charger does not deliver enough power and so charging seems to be slow, can you give me the amperage in the top of the app ? (min, current & max)
Also are you on Stock Rom (Root etc)?
Pepe_The_Frog said:
Seems clear now, i think that if the cable isn't type c, we can't get the 3A for charging the device.
with og cable i'm able to get 3A but with an USBC to A i'm stuck at 1,5~ ( http://imgur.com/a/LVgAi )
I think your charger does not deliver enough power and so charging seems to be slow, can you give me the amperage in the top of the app ? (min, current & max)
Also are you on Stock Rom (Root etc)?
Click to expand...
Click to collapse
now max 1500 min 1200 sometime 1100 mx 980 min..some time 500 max 320 min...iam at stock android 7.1.1 no root
znayver said:
now max 1500 min 1200 sometime 1100 mx 980 min..some time 500 max 320 min...iam at stock android 7.1.1 no root
Click to expand...
Click to collapse
According to results, it should be the charger that doesn't give sufficent power to the phone.
Try to get an charger with an USB C port and a USB C toC cable.
Here's some links, cheapest ones that i found:
-https://www.amazon.fr/gp/product/B01EBUUQBW (bought this one, able to get 2,7/3A)
-https://www.aliexpress.com/item/5V-3A-Original-Quick-Charging-Type-C-USB-EU-Plug-Wall-Fast-Charger-Cable-Cabel-for/32698384266.html Original charger
or do the classic method : airplane&stop apps
Pepe_The_Frog said:
According to results, it should be the charger that doesn't give sufficent power to the phone.
Try to get an charger with an USB C port and a USB C toC cable.
Here's some links, cheapest ones that i found:
-https://www.amazon.fr/gp/product/B01EBUUQBW (bought this one, able to get 2,7/3A)
-https://www.aliexpress.com/item/5V-3A-Original-Quick-Charging-Type-C-USB-EU-Plug-Wall-Fast-Charger-Cable-Cabel-for/32698384266.html Original charger
or do the classic method : airplane&stop apps
Click to expand...
Click to collapse
tnnnx a looot mr pepe for your great helllp ttttnnnnx 1000000
znayver said:
tnnnx a looot mr pepe for your great helllp ttttnnnnx 1000000
Click to expand...
Click to collapse
Glad to help man
Envoyé de mon Nexus 5X en utilisant Tapatalk
So I've had a USB c for a while and now I need a second charger for this phone? Any recommendations that will work with the fast charge? I have a quick charge base already that I used with my LG, will any micro USB cable work with it? Pardon my ignorance
Anker and Aukey are my goto for everything charging related
Most cables work except for the ones that you run into occasionally that won't charge any device properly.
So my Qualcomm 2\3.0 adapter doesn't seem to quick charge this device. Any idea where to get an OEM Moto adapter that came with the phone? Or an aftermarket one that works with the turbo charge
Buy a moto g3 turbo(merlin) charger that works perfect with moto g5+
joshk89 said:
So my Qualcomm 2\3.0 adapter doesn't seem to quick charge this device. Any idea where to get an OEM Moto adapter that came with the phone? Or an aftermarket one that works with the turbo charge
Click to expand...
Click to collapse
Weird as my QC2.0 Charger does quick charge the phone
Doesn't Quick Charge (Anker PowerPort+1 18W)
https://www.amazon.de/gp/product/B017XBDBI6/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1 (usb type home charger, one output, QC 3.0)
Does Quick Charge (Anker PowerDrive Speed 2 39W)
https://www.amazon.de/gp/product/B01K9MQ8WW/ref=od_aui_detailpages02?ie=UTF8&psc=1 (usb type car charger, dual output, 2x QC 3.0)
...
---------- Post added at 08:18 AM ---------- Previous post was at 08:13 AM ----------
ckret said:
Weird as my QC2.0 Charger does quick charge the phone
Click to expand...
Click to collapse
would you specifiy the product?
The Anker PowerPort+1 18W (QC 3.0, one Port) doesn't quick charge my G5 plus. Stays in 5 V + 1.5 A mode (which is only 7.5 W), instead of 12 V + 1.5 A (which is 18 W and does the exact same harm to the battery due to the same current... - so in this case I'd prefer to use one that uses quick charge).
i got it a long time ago so i am not sure but it looks like this
http://www.gearbest.com/iphone-cables-adapters/pp_322054.html
and works just fine
ckret said:
i got it a long time ago so i am not sure but it looks like this
http://www.gearbest.com/iphone-cables-adapters/pp_322054.html
and works just fine
Click to expand...
Click to collapse
I hope you don't mind me asking, but: Does this mean you've been testing it with a voltage and current USB monitor (power monitor) that it really charges with a voltage of something like 9-12 V(DC) and a current of 1-1.5 A(DC) and you've also seen the "turbo charge" within the G5 Plus display or does it just "work" in the sense of "it is charging, but not sure at which power" ?
sky-head said:
I hope you don't mind me asking, but: Does this mean you've been testing it with a voltage and current USB monitor (power monitor) that it really charges with a voltage of something like 9-12 V(DC) and a current of 1-1.5 A(DC) and you've also seen the "turbo charge" within the G5 Plus display or does it just "work" in the sense of "it is charging, but not sure at which power" ?
Click to expand...
Click to collapse
Well I dont have a voltage and current meter but testing it with the app Ampere it shows same value and also on connecting it displays "turbocharger connected"
Warp charging doesn't go beyond 3.5Amps on ampere app causing slow charging rate shouldn't it give close to around 5.2Amps charging speed? Can anybody share their screenshot or is there a issue with my device
kryolyt said:
Warp charging doesn't go beyond 3.5Amps on ampere app causing slow charging rate shouldn't it give close to around 5.2Amps charging speed? Can anybody share their screenshot or is there a issue with my device
Click to expand...
Click to collapse
With Warp Charge there are several factors that come in to play. The charger itself, the USB Type-C Cable and your device.
Has Warp Charge ever worked on your device?
When the cable is connected do you see "Warp Charge" displayed on the screen?
Did the Ampere App ever show the maximum 5.9 amps or does it always show a maximum of 3.5 amps?
Are you using the original Warp Charge wall outlet adapter and original USB Type-C Cable?
If Warp Charge was working before, how long has it been since you last saw it work?
Have you modified the device at all?
Sent from my OnePlus HD1907 using XDA Labs
fast69mopar said:
With Warp Charge there are several factors that come in to play. The charger itself, the USB Type-C Cable and your device.
Has Warp Charge ever worked on your device?
When the cable is connected do you see "Warp Charge" displayed on the screen?
Did the Ampere App ever show the maximum 5.9 amps or does it always show a maximum of 3.5 amps?
Are you using the original Warp Charge wall outlet adapter and original USB Type-C Cable?
If Warp Charge was working before, how long has it been since you last saw it work?
Have you modified the device at all?
Click to expand...
Click to collapse
Yes it was all working before I have earlier got 5.2 to 5.5 amps but from past couple of months it's been fixed at 3.5 amps now, and yes I have been using original warp charger provided and no haven't unlocked or rooted my device, could this be a problem with the device or any other fix for this?
fast69mopar said:
With Warp Charge there are several factors that come in to play. The charger itself, the USB Type-C Cable and your device.
Has Warp Charge ever worked on your device?
When the cable is connected do you see "Warp Charge" displayed on the screen?
Did the Ampere App ever show the maximum 5.9 amps or does it always show a maximum of 3.5 amps?
Are you using the original Warp Charge wall outlet adapter and original USB Type-C Cable?
If Warp Charge was working before, how long has it been since you last saw it work?
Have you modified the device at all?
Click to expand...
Click to collapse
Look that's the Max I get with the official warp charge now, and it's been constant, restarted still no good
kryolyt said:
Look that's the Max I get with the official warp charge now, and it's been constant, restarted still no good
Click to expand...
Click to collapse
That's what I get with stock charger + stock cable.
Edit: I forgot! I have Arter Kernel r54 running on OB2!!
Kollachi said:
That's what I get with stock charger + stock cable.
Edit: I forgot! I have Arter Kernel r54 running on OB2!!
Click to expand...
Click to collapse
Can you look at your oxygen version please, which one are you at?
kryolyt said:
Can you look at your oxygen version please, which one are you at?
Click to expand...
Click to collapse
OB2 = Open Beta 2
Sent from my OnePlus HD1907 using XDA Labs
Bought mine 2019-12 . few days ago (2020-03-30) warp charge stopped working, it still charged, but extremely slow like 40 percent an hour. When it was off i tried plugging in charger, but it started looping, it didn't boot to an animated picture with charging battery, but it still could boot into OS when power button was pressed. Did a factory reset, didn't help. Connecting to pc usb still recognizes it. Had a feeling it was a hardware error. Maybe fast charging module went bad.
Sent it for a warranty repair, got an answer that it will take more time because it was sent for an higher level service. I guess it's quite bad, it could be a motherboard fault.
I read on oneplus forums that quite a few people has a same issue.
Connect it to a pc, see if it is recognized. Mine stopped working & it was a bad USB Car port. It would still slow charge but no warp charge & no windows pc would recognize it connected
Hi! I have the same issue, only difference is that mine is sometimes charging at warp speed and most of the time at 3300 mAh "dash speed". Did you manage to see what the issue was?
vaidas196 said:
Bought mine 2019-12 . few days ago (2020-03-30) warp charge stopped working, it still charged, but extremely slow like 40 percent an hour. When it was off i tried plugging in charger, but it started looping, it didn't boot to an animated picture with charging battery, but it still could boot into OS when power button was pressed. Did a factory reset, didn't help. Connecting to pc usb still recognizes it. Had a feeling it was a hardware error. Maybe fast charging module went bad.
Sent it for a warranty repair, got an answer that it will take more time because it was sent for an higher level service. I guess it's quite bad, it could be a motherboard fault.
I read on oneplus forums that quite a few people has a same issue.
Click to expand...
Click to collapse
had similar issue today .and while charging at switch off system reboot frequently.is there any solution.is it hardware issue or software issue