I have whyred (Indian ver.) I was using orange fox recovery latest build. What i did was flashed redmi note 5 Russian recovery rom (whyred ru). The rom flashed correctly, after i set up the rom i went again to recovery to flash havoc os.
Before flashing havoc i flashed 20.6.18 china beta firmware and restarted to recovery again.
Then i selected havoc os it said some error like corrupt or something. then i selected pixel experience, same error popped. Every rom i flashed gave me error.
I was frightened so i rebooted the phone to fastboot and went to mi flash. I didn't noticed it was showing device as com7 instead of serial no.
When i clicked flash it said cannot receive hello packet error.
I've tried every guide available but no luck.
Please help ?.
Now phone is dead and is just showing as com port
Unbricked!!!!!
Related
hello mi max users
I was on latest resurrection remix and i wanted to try miui 8.2.5 .. so I downloaded the recovery rom and installed in TWRP recovery after full wipe.
the device booted but with no baseband nor imei
I rebooted into recovery and I didn't find it !
I checked the phone lock state and found that the bootloader still unclocked "thank god" so I flashed TWRP and restored my RR backup.
now the phone has restored the baseband and imei but it cant get signal.. any clue to fix this problem ??
I tried different roms but the problem still there
UPDATE: The sim is working fine in tray 1 "instead of the sdcard" .. the problem is in sim2 tray
UPDATE 2 : problem fixed after flashing a fastboot Rom.. Thank you dead forum
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Good to hear you got it up and running.
derpaherp said:
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Click to expand...
Click to collapse
hey - how did you get mi unlock to work? im having this problem: mi unlock tool 2.3.803.10. it won't show the mi mix 2 as connected with xiaomi drivers, only with google drivers it will show as connected and then let me click unlock. however, it stops at 50% and shows error "couldnt verify device unkown error (-1)". ive logged on to i.mi.com and located the device through find device. does anyone have any pointers how i can unlock, because i want to switch to global dev rom and miui updater wont let me update through system with error "android version is different".
best, alastair
I had this MIUI version MIUI Global 11.0.6 | stable 11.0.6.0 (QFBEUXM) received via OTA. But I flashed my phone because the battery draines when it's in standby mode.
I installed the follow rom V11.0.4.0.QFBMIXM (MIUI11) using fastboot Update.
The problem
After installation, I had a mistake when I flash my device using MiFlash, I forgot select clean all instead of clean all and lock.
Now, I get this message: This MIUI version cannot be installed on this device. I tried to reinstall the rom but cannot do it. Now my phone is in an infinite loop.
I bought my device new with bootloader unlocked from Amazon.
I tried to reinstall the rom grus_images_V11.0.3.0.QFBCNXM_20200426.0000.00_10.0_cn_da9b1a6100.tar using EDL Mode but also failed.
Is there any way to get my phone back?
Please, help me.
Thanks!
Have problem with RN8P. M rom is miui12.01. Unlocked bootloader and tryed to root it through twrp. when i flashed magisk 20 phone got into bootloop and now restarting non stop on redmi screen. tryed to flash miui 12.03 through flashtool but giving me error, antiroll ceck failed... WHAT TO DOOO, HELPPP
I was on EEA 12.01. Tryed global 12.03 and EEA 12.01 and cant flash any, always error ANTIROLLBACK CHECK FAILED...... HELP Please
GOT it. After few hours of struggle. Only problem was that folder name of rom was too long (over 260 caracters) Shortened it and flashed without problem.... Regards
I install the global rom (code cannong) over twrp.
After that It work fine without signal. My phone code is cannon(cn version) ,as somebody suggeted (telegram) ,I flash the md1img.img over the fastboot ,it's loop rebooting. Then I flash the preloader.img ,it get brcik.It's black screen,and couldn't go into the fastboot.So I took it to MIHome...
twrp
the twrp