https://forum.xda-developers.com/ga...e-development/rom-superioros-phoenix-t4143387
Hi is my first post every, i just recently flashed this rom but it kinda messed up whole phone so it became unbrickable because button presses aren't responding to download mode combo (Bixby + volume down + power button).
I post the to xda link to this thread. After i flashed the phone got stuck in boot loop and logo boot changed from s9 boot to s9+ boot logo, mine device is s9 (sm-g960f). After that my phone stopped respond in button presses because of this rom ultra bricked my phone. A usually custom rom is unbrickable by flashing stock via Odin.
Please somebody help!
*I KNOW ABOUT FLASHING RESPONSIBILITY!*
Did you flash the S9+ version by accident?
Related
I updated adaway and know the phone is stuck at the samsung boot logo. Tried going into recovery but phone wont go to recovery mode . Could be because of the sticky power button issues ?
What are my options here reinstall stock rom . I had slim beam installed with TWRP recovery. Tried these steps 2) Hold down home, power, and volume UP , phone vibrates and then its back to the samsung logo.
smartguy10 said:
I updated adaway and know the phone is stuck at the samsung boot logo. Tried going into recovery but phone wont go to recovery mode . Could be because of the sticky power button issues ?
What are my options here reinstall stock rom . I had slim beam installed with TWRP recovery. Tried these steps 2) Hold down home, power, and volume UP , phone vibrates and then its back to the samsung logo.
Click to expand...
Click to collapse
Hold volume up and down, press power button until it vibrates and let go of power button only. This is for T989. The procedure for T989D is different.
Using Odin and installing stock Rom manually
Hey, it sounds like you have the same problem i had. What i did to fix it is download the stock ROM for my phone and download Odin. The i reinstalled the rom ontu the phone and it worked fine. Just look uo how to do this for you type of phone included moded for example i had a tmobile samsung galaxy s2 t989.
Phone was fine for few days , restored it with odin now same issue. Phone shows samsung loho and nothing happens . Not sure whats causing this or its the not good build quality of of these phones..
Hi everyone,
this is my first post here!
So today i took my brother's GS3 and saw he was on 4.0.1 and tried to upgrade to 4.3 via Odin
The first problem was that his volume down button is broken, so i have to use adb to put in download mode, I did it and successfuly updated but it showed emergency calls only, and after some search's I've found that was a problem with Modem file. As it must be rooted, i've rooted it but at the time i tried to install the modem through recovery again a problem because of the volume down button that wasn't working, so here starts the worst part> than i did the big mistake after downloading cydgenmod with touch for gs3 i accidentally selected an other Cydgenmod recovery for Galaxy Grand and didn't notice and so installed with Odin, than after the device rebooted i tried to boot to recovery but stuck on samsung galaxy logo so i thought it was a problem with vol up button and turned the phone on and send the command reboot recovery with adb . now it wont boot just stuck at samsung galaxy logo, i cannot get in download mode because of volume down button that its not working.
Does anyone know anyway of fixing this or the onliest way is to fix the volume down button?
Thanks for your time first !
Hi Friends,
I have a situation here, I got a Samsung GT-N7105 from my friend this phone had Kitkat custom ROM(some note 4 clone) on it. I wanted to remove this ROM and install a stock ROM on it .
I downloaded GT-N7105_N7105XXALJ3_N7105OLBALJ1_4.1.1-SHT from a website and flashed it using ODIN. Everything went fine but since then my phone is stuck on the Samsung logo. I am unable to access download mode or recovery mode.
The phone boots up fine but when I hold Volume UP + Home + Power button the 'Samsung GT-N7105' logo keeps on flashing and on releasing the power button its again stuck on samsung logo.
Please advise how to fix this issue.
Flash the latest ROM from sammobile.com using Odin.
Download mode is power, volume down, and home. Since that doesn't work, try a USB jig.
I flashed my Samsung J2 device using Odin and was able to enter into TWRP mode but now it is not booting in normal mode. It just gets stuck in a bootloop if I switch it on. But on pressing Home + Volume Up + Power button, it boots into TWRP which works fine.
Please tell me how to boot normally to phone. I do not want to brick my phone.
Please help!!
Installing Stock ROM solved the problem
I installed stock ROM using this tutorial rootsamsung.com/flash-samsung-stock-firmware-4-files (add https:// Couldn't post link as I am a new member) and my Samsung J2 is working as new
Posting here to make life easier for those who are facing the same problem
Hi, can anyone help please. i attempted rooting with odin and was on the latest android 10. Following a guide https://appuals.com/how-to-root-the-samsung-galaxy-tab-s4/ i hadnt realised it may of been for Oreo. Now i get stuck in 3 boot loops, Samsung logo (Custom) with Kernel showing in yellow (quickly pressing vol up), Samsung logo with recovery showing in yellow (keeping vol down pressed), if i hold vol up down and power i get to the downloading screen but cant get odin to detect my tablet. im currently downloading sam mobile latest version, but do i now have a bricked device or has someone ran into this before. Thanks