Hey guys
I just recieved my Huawei Band 4 Pro today and was able to use until i've seen that theres an update
I updated it and suddenly it went black screen and from then it doesnt turn on. Not even when connected to the charging port.
Is there a solution? From all i've seen every force-restart is from the band itself but i can not access it at all as its just black screen..
Also i see the green lights indicating its measuring bpm
isnt that wierd
Related
I noticed that Signal Reception Led is not blinking .
I can see it working sometime and sometimes not.
It is also same for bluetooth led. When I turn bluetooth on, blue led doesnt blink.
Is this hardware issue or software probkem? Can anyone help?
I dont think it has this function (the last device has this function if i'm not mistaken is htc tytn [hermes] ). Its only for notification like new sms, etc. like circle LED light on touch pro (raphael)
Light only flashes when it's told now. Doesn't flash for reception any more. For the record the TyTNII had it.
Mine flashes when I have a new text message or when GPS is on.
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
thank man. I was worried that there is a problem with my device which I received 3days ago.
neforce said:
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
Click to expand...
Click to collapse
There will be flashing amber light when remaining batt level is below 10%.
yeah, it goes blinking orange-like color. but it would be nice if it blinks red when it is nearly empty...
why does they always reject the good features....
Hello,
Yesterday when I was done working and got my phone from my locker, I opened an app and immediately
the screen went black and appearantly the phone had switched itself off. I turned it back on wondering why
it did this, but as soon as it had started up and the home screen appeared, it turned itself right back off.
I tried turning it back on about 7 or 8 times until the battery ran out and I could not try anymore.
When I got home I put it on the charger and fortunately the phone stayed on, however the top of the screen
seemed to be 'trembling' a bit and some pixels were changing from light red to dark red to light red etc. (my home screen is red)
I decided to leave it charging overnight and when I woke up, the trembling had disappeared. I took it off the
charger and after scrolling through my Facebook news feed, found that battery percentage was decreasing quite
quickly considering it's on power saver mode. I thought it might be that the screen brightness is too high, so I went
to settings and tried to adjust the screen brightness, however it is not responding? My screen brightness stays
exactly the same no matter whether I increase or decrease it, and when I was doing that the phone switched itself
off again. I put it back on charge now and turned it back on, but I am quite annoyed about this issue because I
do not know what it is and my phone is only 5 months old. I hope any of you can shed some light on the situation.
Summary of the issues:
- Phone switching itself off
- Screen trembled yesterday
- Battery decreasing quickly
- Brightness setting not working
Info about the phone:
- HTC One X 5 months old
- Android 4.2.2
- No adjustments made to the phone with rooting or any of that
Thanks!
Must be a hardware failure if you havent changed anything software-wise
Is it overheating?
Is it under warranty?
And other sensors are working? But like TTG TriCkSh0tZz said , use your warranty if you can.
Sent from my HTC One X using XDA Premium 4 mobile app
Hi everyone.
So I've had my htc one m8 for about a year and a half and never had any problems Today all of a sudden the display wont turn on and when I plug in the charger it wont show the led light. When i call on my number , it goes through but there is no sound and the display wont light up.
Does anyone know as to why this is happening ? Maybe some hardware issue ?
Hi guys, any advice will be helpful.
Last day i was at office and was charging my Huawei watch, later i saw a yellow blink on the screen and when i tried to turn on the screen by taping on the screen or using wrist gesture the screen wont display.
Observations
1. Watch completely works perfect only the display is not showing up when you wake the or want to use the screen.
2. The touch is working. (can select even the screen is fully black and navigate)
3. On the "always on" mode the notifications and the always on display is showing. only the bright display is not working.
Disclaimer
Im new in posting threads in XDA, english is weak
I had a similar thing happen when I had a brightness app installed, I think it was Wear Brightness Control: https://play.google.com/store/apps/details?id=com.edgecontrols.android&hl=en
It took me forever to figure that out and get the app uninstalled, but my watch has been fine ever since. You might check to see if you have the same or a similar app installed on yours.
Hi!
Just bought last week and I don't understand how AOD works (or maybe with some bug)?
When turned on wasn't supposed to have the clock always displaying? When l lay down the arms the watch stays all black and the display only turn on when I move it up..
Any tips?