Develop Bugs

moto g5 xt1670 firmware help

Someone knows where I can get the firmware of the moto g5 xt1670 what is searched on several pages and nothing

Go here : https://www.getdroidtips.com/download-install-npp25-137-33-stock-firmware-moto-g5/
---------- Post added at 10:26 PM ---------- Previous post was at 10:22 PM ----------
Go here : https://www.getdroidtips.com/download-install-npp25-137-33-stock-firmware-moto-g5/
Follow this guide : https://youtu.be/EMyaDv1lcYg

I'm also looking for a firmware for the variant XT1671 but i could not find it.

avercros said:
I'm also looking for a firmware for the variant XT1671 but i could not find it.
Click to expand...
Click to collapse
These are what I could quickly find - I'm sure other variants will flash OK but I don't know if your duel or single sim - there's only one way to find out if they will work for you
https://drive.google.com/drive/mobi..._NsGJYGFyVcHdETThRS0haYmM?sort=13&direction=a

This version NPP25.137-33 was released in Brazil, where there is the model XT1672 Dual Sim. If you install this version in the model XT1670 Latin America Single sim, I will not have problems in the IMEI?

here it is
https://firmware.center/firmware/Motorola/Moto G5/Stock/XT1670/
I installed it and it's perfect
here the commands
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
the firmware does not have the gpt.bin file and puts error but still installing everything else and everything is perfect and walk away greetings

How do I relock bootloader and go back to stock on moto G5s?

A friend unlocked its bootloader and tried to root it with no success.
The phone works but only boots through fastboot, because when I press the power button it enters fastboot mode instead of booting.
I don't know what happened, as I was not the one who tried to root, so I just wanted to know how to revert back to stock and relock the bootloader, since the phone works normally.

freeZbies said:
A friend unlocked its bootloader and tried to root it with no success.
The phone works but only boots through fastboot, because when I press the power button it enters fastboot mode instead of booting.
I don't know what happened, as I was not the one who tried to root, so I just wanted to know how to revert back to stock and relock the bootloader, since the phone works normally.
Click to expand...
Click to collapse
If they flashed twrp and your phone can only be started normally through the bootloader see
https://forum.xda-developers.com/g5/how-to/fix-phone-reboots-recovery-mode-started-t3705325
If you want to root the phone stock can only be rooted with a system root
Most roots now use a systemless root which is not compatible with the stock kernel
You either need a custom rom to use the latest magisk root or if you want to stick with stock use an old version of magisk (can't remember which really old version works) or use supersu but flash the config zip first and set to system as default will be systemless
With regards to flashing stock download firmware and run these fastboot commands assuming you have fastboot set up on your pc
fastboot oem fb_mode_set
fastboot flash partition gpt.bin (do not flash unless you want to repartition the phone)
fastboot flash bootloader bootloader.img (do not flash unless you really need to replace the bootloader)
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot
To lock the bootloader do the above and then go back to the bootloader mode & enter these fastboot commands
fastboot oem lock
fastboot oem lock (yes type it again)
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Then once restarted refresh all the firmware again with the commands from earlier
I have seen though that some boot.img are not officially signed so it may not lock

TheFixItMan said:
If they flashed twrp and your phone can only be started normally through the bootloader see
https://forum.xda-developers.com/g5/how-to/fix-phone-reboots-recovery-mode-started-t3705325
If you want to root the phone stock can only be rooted with a system root
Most roots now use a systemless root which is not compatible with the stock kernel
You either need a custom rom to use the latest magisk root or if you want to stick with stock use an old version of magisk (can't remember which really old version works) or use supersu but flash the config zip first and set to system as default will be systemless
With regards to flashing stock download firmware and run these fastboot commands assuming you have fastboot set up on your pc
fastboot oem fb_mode_set
fastboot flash partition gpt.bin (do not flash unless you want to repartition the phone)
fastboot flash bootloader bootloader.img (do not flash unless you really need to replace the bootloader)
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (ignore any error)
fastboot erase clogo (ignore any error)
fastboot oem fb_mode_clear
fastboot reboot
To lock the bootloader do the above and then go back to the bootloader mode & enter these fastboot commands
fastboot oem lock
fastboot oem lock (yes type it again)
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Then once restarted refresh all the firmware again with the commands from the first post
I have seen though that some boot.img are not officially signed so it may not lock
Click to expand...
Click to collapse
Yes, thank you.
I was checking the relocking guides here in xda and seems signed boot images are the problem. Anyways, I'll check to see if it works.

freeZbies said:
Yes, thank you.
I was checking the relocking guides here in xda and seems signed boot images are the problem. Anyways, I'll check to see if it works.
Click to expand...
Click to collapse
Also just noticed you are talking about the Moto G5s - this is the Moto G5 Cedric forum
The Moto G5s forum is located
https://forum.xda-developers.com/moto-g5s

TheFixItMan said:
Also just noticed you are talking about the Moto G5s - this is the Moto G5 Cedric forum
The Moto G5s forum is located
https://forum.xda-developers.com/moto-g5s
Click to expand...
Click to collapse
Oh thanks, I'm gonna check it there, because it's indeed a Moto G5S.
Only thing I'd like to say is that on the XDA Labs app the only forum shown when I search for Moto G5S is the Moto G5 forum, no variants are presented, whom should I report this to, so that it can be fixed?

freeZbies said:
Oh thanks, I'm gonna check it there, because it's indeed a Moto G5S.
Only thing I'd like to say is that on the XDA Labs app the only forum shown when I search for Moto G5S is the Moto G5 forum, no variants are presented, whom should I report this to, so that it can be fixed?
Click to expand...
Click to collapse
No idea - don't use the app
The email on the Google play listing says
[email protected]
The thread for the app is
https://forum.xda-developers.com/android/apps-games/labs-t3241866

cant start my moto z2 force (brick?)

Hello everyone i tryed to root my moto z2 force using xda tutorials but it didnt work, i unlocked bootloader, so when i installed magisk and recovery twrp didnt start my device, i decided to reinstall stock rom because i read that to recover my device i can do it, i downloaded a telcel firmware for Mexico for moto z2 force but i cant install bootloader with the command: fastboot flash bootloader bootloader.img
and now when i turn on my device it says that i have a diferent operating system and reboot and same message all time, help please

Can you get into fastboot mode if so use uzephi's
https://forum.xda-developers.com/z2-force/how-to/how-to-return-to-stock-sprint-t3694783 return to stock image but use the firmware for your device from here https://mirrors.lolinet.com/firmware/moto/nash/official/

riskyfuture said:
Can you get into fastboot mode if so use uzephi's
https://forum.xda-developers.com/z2-force/how-to/how-to-return-to-stock-sprint-t3694783 return to stock image but use the firmware for your device from here https://mirrors.lolinet.com/firmware/moto/nash/official/
Click to expand...
Click to collapse
i really apreciate your help really i was desperate hahaha, before do this you replyed i was reading a lot abot the problem but not really for moto z2 force and they said that have to install the last firmware with last bootloader to recover, then i did it i downloaded the last https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
then i tryed to flash bootloader and really flashed!!, so i turned on my phone and now works normal i used this commands:
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash system_b system_b.img_sparsechunk.3
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase ddr
fastboot reboot
apreciate your help a lot really thx
UPDATE: i have a question. found in your software link the Telcel MX firmware of my moto Z2 force, but if i update from OTA on my actual firmware is the posibility to get brick??, i dont know if install the Telcel firmware because it has Telcel aplications i hate of carrier

i want stock rom for moto g5 XT1676 to unbrick by blankflashing

hey
please i want help i want stock rom for moto g5 XT1676 to unbrick by blank-flashing and how do it in steps on my dead phone
sorry for bad english

my phone moto g5 rooted when i try to unroot by minimal adb past wtong stock rom in Minimal ADB and Fastboot folder when i intered command and i pasted this order :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
//////////////////////////////////////////// after this step ended my phone not strat or boot /just white led blinking when connected by charger
mention / my phone is moto g5 xt1676 rooted but i flashed this stock CEDRIC_NPP25.137-93_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,forMotor ola Moto G5(XT1672) but my phone Motorola Moto G5(XT1676) please help me

If you can no longer get into the bootloader to flash correct firmware via fastboot see
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012

TheFixItMan said:
If you can no longer get into the bootloader to flash correct firmware via fastboot see
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
Click to expand...
Click to collapse
after i did this steps and finshed the last command the phone not open

waleedzzz said:
after i did this steps and finshed the last command the phone not open
Click to expand...
Click to collapse
Did gpt & bootloader flash correctly?
Did you get errors flashing these?
Read the last few posts on that thread!
You can still boot with the sd card but to boot without it gpt & bootloader must be flashed successfully using firmware that is equal or newer to the version already installed
If you bricked your phone flashing an 8.1 soak test ota you may have to wait until 8.1 firmware is released

TheFixItMan said:
Did gpt & bootloader flash correctly?
Did you get errors flashing these?
Read the last few posts on that thread!
You can still boot with the sd card but to boot without it gpt & bootloader must be flashed successfully using firmware that is equal or newer to the version already installed
If you bricked your phone flashing an 8.1 soak test ota you may have to wait until 8.1 firmware is released
Click to expand...
Click to collapse
i soloved by this method These two files are those that are damaged when doing downgrade on your G5 bike
therefore here I leave you the most updated
so that the flashees and your phone can light up without the SD
if you flash these two you will not need to flash a complete firmware
Just open the folder that says Fastboot and click on the MAF32.exe file or START.bat
Once there you will insert the micro sd on your g5 motorcycle and turn it on in fastboot mode and take out the sd
and then connect your motorcycle g5 that is on and flash these commands
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
and that would be everything and you could start your phone without the micro SD
the link to slow

Baseband not found z2 force sprint xt1789-03

Sorry I'm not good at English
I have the z2 force xt1789-03, I flashed the wrong version of fw android 9 so I lost the baseband when I was in the android rom 8. I tried to flash the latest version but I could not get back the baseband. Please show me how to get it back to the beginning!

DuynangVietnam said:
Sorry I'm not good at English
I have the z2 force xt1789-03, I flashed the wrong version of fw android 9 so I lost the baseband when I was in the android rom 8. I tried to flash the latest version but I could not get back the baseband. Please show me how to get it back to the beginning!
Click to expand...
Click to collapse
If you have flashed a Pie ROM to your device you will not be able to go back to Oreo and have a working device. Did you try to flash an official version of Pie that was released by your carrier or did you flash a version that you found on the forums somewhere?

Getting baseband back and making wifi and sims work
I had the same issue and got stuck hopelessly but after a few hit and tries, I finally made my wifi and cellular network work on my sprint smartphone (baseband was gone).
what you need to do step by step is:
1. download pie variant of Verizon carrier from mirrors dot lolinet dot com/firmware/moto/nash/official/VZW/ (replace dot with . )
2. download latest pie variant of Retail variant of z2 force from mirrors dot lolinet dot com/firmware/moto/nash/official/RETAIL/
3. copy NON-HLOS.bin from verizon variant and copy it to retail variant of pie firmware
4. download any flashall file and rewrite it (open with notepad and edit, it is as simple as that) or run commmands in following order in retail firmware folder:
fastboot oem fb_mode_set
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot -w
fastboot reboot-bootloader
5. run flashall and let it boot.
6. enjoy
NOTE: reversion of baseband is not possible and maybe custom roms will work no more but you will get to make your device work.

muar_96 said:
I had the same issue and got stuck hopelessly but after a few hit and tries, I finally made my wifi and cellular network work on my sprint smartphone (baseband was gone).
what you need to do step by step is:
1. download pie variant of Verizon carrier from mirrors dot lolinet dot com/firmware/moto/nash/official/VZW/ (replace dot with . )
2. download latest pie variant of Retail variant of z2 force from mirrors dot lolinet dot com/firmware/moto/nash/official/RETAIL/
3. copy NON-HLOS.bin from verizon variant and copy it to retail variant of pie firmware
4. download any flashall file and rewrite it (open with notepad and edit, it is as simple as that) or run commmands in following order in retail firmware folder:
fastboot oem fb_mode_set
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot -w
fastboot reboot-bootloader
5. run flashall and let it boot.
6. enjoy
NOTE: reversion of baseband is not possible and maybe custom roms will work no more but you will get to make your device work.
Click to expand...
Click to collapse
Hi, excuse my English, I'm using a translator.
I have a problem, update my Sprint z2 force with a RETAIL firmware and all right just a couple of problems, the sim does not detect, I do not know if I lost the unlock-sim, because the wifi works perfectly, Will they know what it could be?
I did the above and it didn't work, it still doesn't detect the sim, should I flash the file of a Mexican company? I'm from México

Are there anyone has successful with this method ?

nothingtolose said:
Are there anyone has successful with this method ?
Click to expand...
Click to collapse
Unsuccessful here, mine is a variant XT1789-05, is currently with version OPXS27.109-34-4, but I have no wifi, no data network, lost baseband, any solution?
I've tried almost everything, wanted to put in edl mode, but it does not enter.

fallcaoalves said:
Unsuccessful here, mine is a variant XT1789-05, is currently with version OPXS27.109-34-4, but I have no wifi, no data network, lost baseband, any solution?
I've tried almost everything, wanted to put in edl mode, but it does not enter.
Click to expand...
Click to collapse
I read somewhere in this forum, your variant -05 can back to normal.
My variant -03 did not work with this method too.

yes
nothingtolose said:
Are there anyone has successful with this method ?
Click to expand...
Click to collapse
cordial greetings friends I tell you to use the method offered here by the partner and it actually works, I have an operator signal but it does not activate wifi, I really appreciate this help, but I have to solve wifi
:good:

muar_96 said:
Getting baseband back and making wifi and sims work
I had the same issue and got stuck hopelessly but after a few hit and tries, I finally made my wifi and cellular network work on my sprint smartphone (baseband was gone).
what you need to do step by step is:
1. download pie variant of Verizon carrier from mirrors dot lolinet dot com/firmware/moto/nash/official/VZW/ (replace dot with . )
2. download latest pie variant of Retail variant of z2 force from mirrors dot lolinet dot com/firmware/moto/nash/official/RETAIL/
3. copy NON-HLOS.bin from verizon variant and copy it to retail variant of pie firmware
4. download any flashall file and rewrite it (open with notepad and edit, it is as simple as that) or run commmands in following order in retail firmware folder:
fastboot oem fb_mode_set
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot -w
fastboot reboot-bootloader
5. run flashall and let it boot.
6. enjoy
NOTE: reversion of baseband is not possible and maybe custom roms will work no more but you will get to make your device work.
Click to expand...
Click to collapse
Hi,
confirmed working on my xt1789-03, with the following considerations:
-> Wifi and bluetooth now working
-> Sim card seems to be detected, but no radio or signal.
-> IMEI remains 0
-> When boot a message appears: "Verity Mode is set to disabled"
So, little step to success. From now, I have a little tablet with wifi.
Many thanks to Muar_96