Related
I have a OnePlus 5T that passes fully the SafetyNet test, but after a few hours it gives false in ctsProfile and BasicIntegrity, I am with Android 8.1 OxygenOS 5.1.5 (I already tried with 5.1.4 doing a thorough cleanup between rom exchange and also unsuccessful ), I unlocked Bootloader and installed TWRP 3.2.3 Blu spark v9.85, then i flash Root Magisk 17.1 by twrp, Installed from a clean ROM and I've already tried with 17.2 and It's the same thing at the end, I have also tried to install Magisk 16.0 from a clean rom and then upgrade to 17.1 directly via Magisk Manager but it was the same, already activated the Magisk Hide in all necessary applications, I hid the Magisk Manager, I've tried flashing Petnoire's SafetyNet Spoofer and me too changed the device fingerprint by MagiskHide Props Config but nothing solved my initial problem, every time I restart the device it passes on the SafetyNet again but after a few hours it fails again, Now i tried to flash the module Universal SafetyNet Fix v3 beta1(MG v17 fix) by Magisk Manager, but Magisk Manager stopped opening even uninstalling the application and installing other versions, I tried more than once and the installation of this module always presents this problem even flashing by TWRP, and after a few hours too SafetyNet failed, Can inform me the latest version of OxygenOS for OnePlus 5T that passes on SafetyNet without any problem? Even though OxygenOS is perfect for me, I'm willing to change rom in the last case, because the most important thing for me is to go through SafetyNet to use the applications I need.
Try to disable "developer menu" in "settings", then reboot and check safetynet again.
Try Magisk 17.2 and delete if you have the magisk folder (now it uses the Download folder). You can also try the latest OB (17). If it's not working, FYI I'm using the CNP rom (Pie) with Magisk 17.2 and SafetyNet is OK, so you can try it if you want...
anatoly1983 said:
Try to disable "developer menu" in "settings", then reboot and check safetynet again.
Click to expand...
Click to collapse
I tried to do this yesterday but the initial problem persisted, every time I restart the device it passes on the SafetyNet again but after a few hours or minutes it fails again.
yoye_cros said:
Try Magisk 17.2 and delete if you have the magisk folder (now it uses the Download folder). You can also try the latest OB (17). If it's not working, FYI I'm using the CNP rom (Pie) with Magisk 17.2 and SafetyNet is OK, so you can try it if you want...
Click to expand...
Click to collapse
I had already deleted the Magisk Manager folder and as for this rom it is stable? Can you inform me the serious bugs?
Mega_Monster_X said:
I had already deleted the Magisk Manager folder and as for this rom it is stable? Can you inform me the serious bugs?
Click to expand...
Click to collapse
Honestly, I didn't have found any bug. I tried crDroid but I wasn't really happy, and CNP is for my use very stable without bug. I don't know if Volte or VoWifi is working because I don't use this. Also, it's very easy to install compared to other Pie Roms. I just can advise you to try it.
Try a different play services apk. This was the case with me previously.
Seagorilla2 said:
Try a different play services apk. This was the case with me previously.
Click to expand...
Click to collapse
I've tried this but to no avail
With Magisk 16.0 everything went fine, the problem is the Magisk modules I used that are not compatible, but I'll search here to see if I find the modules I want for Magisk 16.0.
I have been running into this same problem for the last 2 months or so.
I am on OOS 5.1.4, with the official TWRP, and Magisk 18.
Has anyone had this problem and found a solution?
floborg said:
I have been running into this same problem for the last 2 months or so.
I am on OOS 5.1.4, with the official TWRP, and Magisk 18.
Has anyone had this problem and found a solution?
Click to expand...
Click to collapse
I have not found a solution yet, when I fail on SafetyNet I reboot the device and pass SafetyNet a few times for a short time and sometimes lasts several hours but then fails again , I'm using Magisk 18 in OOS Open Beta 20 Android 9.0
Hi guys,
Since the last few days my snapchat keeps getting temporarily blocked, I'm on a SM-G960F (Galaxy S9_9.0_JULYSecurity) rooted with Magisk and flashed with latest Ambasadii Rom(19.0). The first 3 weeks using snapchat with root & custom rom there weren't any problems at all. Can somebody help me?
Grtzz
Koovah_SC said:
Hi guys,
Since the last few days my snapchat keeps getting temporarily blocked, I'm on a SM-G960F (Galaxy S9_9.0_JULYSecurity) rooted with Magisk and flashed with latest Ambasadii Rom(19.0). The first 3 weeks using snapchat with root & custom rom there weren't any problems at all. Can somebody help me?
Grtzz
Click to expand...
Click to collapse
A lot of people are having the same issue. Magisk Hide doesn't seem to work with the latest versions of Snapchat. No matter what you do you will keep getting locked out of your Snapchat account. I'm a bit of a NOOB when it comes to this stuff but here is what has worked for me so far. Firstly, you have to serve your penance. There's nothing you can do about that. My most recent ban was 2 weeks. When your access has been restored delete the Snapchat app. Download an older version of Snapchat from apkmirror.com and install it. Version 10.540.31 worked for me. **IMPORTANT** You must untick auto-update of the Snapchat app in Goggle Play. Hide the Snapchat app with Magisk and then hopefully you should be OK. It's only a workaround but it's the only solution I've come across that works. Having said that, it's only been several days but so far so good. If I get locked out again I'll let you know. Good luck.
bulky68 said:
A lot of people are having the same issue. Magisk Hide doesn't seem to work with the latest versions of Snapchat. No matter what you do you will keep getting locked out of your Snapchat account. I'm a bit of a NOOB when it comes to this stuff but here is what has worked for me so far. Firstly, you have to serve your penance. There's nothing you can do about that. My most recent ban was 2 weeks. When your access has been restored delete the Snapchat app. Download an older version of Snapchat from apkmirror.com and install it. Version 10.540.31 worked for me. **IMPORTANT** You must untick auto-update of the Snapchat app in Goggle Play. Hide the Snapchat app with Magisk and then hopefully you should be OK. It's only a workaround but it's the only solution I've come across that works. Having said that, it's only been several days but so far so good. If I get locked out again I'll let you know. Good luck.
Click to expand...
Click to collapse
Same issue here and Im on a SM-G960FD with lightROM v23 and magisk 19.3. I tried randomly with 10.60.5.0 but it didnt work. I will try with version 10.540.31 of snapchat when my 2 day ban is over.
It's been 2 weeks and Snapchat hasn't locked me out using my workaround. So far so good. :good::good:
How to use Snapchat with magisk (After Ban)
Koovah_SC said:
Hi guys,
Since the last few days my snapchat keeps getting temporarily blocked, I'm on a SM-G960F (Galaxy S9_9.0_JULYSecurity) rooted with Magisk and flashed with latest Ambasadii Rom(19.0). The first 3 weeks using snapchat with root & custom rom there weren't any problems at all. Can somebody help me?
Grtzz
Click to expand...
Click to collapse
bulky68 said:
A lot of people are having the same issue. Magisk Hide doesn't seem to work with the latest versions of Snapchat. No matter what you do you will keep getting locked out of your Snapchat account. I'm a bit of a NOOB when it comes to this stuff but here is what has worked for me so far. Firstly, you have to serve your penance. There's nothing you can do about that. My most recent ban was 2 weeks. When your access has been restored delete the Snapchat app. Download an older version of Snapchat from apkmirror.com and install it. Version 10.540.31 worked for me. **IMPORTANT** You must untick auto-update of the Snapchat app in Goggle Play. Hide the Snapchat app with Magisk and then hopefully you should be OK. It's only a workaround but it's the only solution I've come across that works. Having said that, it's only been several days but so far so good. If I get locked out again I'll let you know. Good luck.
Click to expand...
Click to collapse
drowsy_fish said:
Same issue here and Im on a SM-G960FD with lightROM v23 and magisk 19.3. I tried randomly with 10.60.5.0 but it didnt work. I will try with version 10.540.31 of snapchat when my 2 day ban is over.
Click to expand...
Click to collapse
Follow these steps to use Snapchat with magisk -
1.) Update to latest Magisk stable build v20.0 - https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip
2.) After updating magisk, Go to Magisk Manager > Magisk Hide and check/enable Snapchat and Google Services (all services have to be marked).
3.) Hide Magisk Manager by it self, go to Magisk Manager > Settings and "Hide Magisk Manager" so it will repack Magisk Manager with random name.
4.) Delete "busybox" binary from /system/xbin directory and install BusyBox module from Magisk Manager > Downloads.
5.) Clear data and cache of Snapchat, try to login this time, it will work for sure, if it doesn't, login to this and click unlock my account - https://accounts.snapchat.com/accounts/login?continue=https://accounts.snapchat.com/accounts/welcome
I have tried this myself and it works, my first main account was permanent banned on magisk canary build, After that I deleted that account :crying: and started out with fresh new account.
Tested on -
Samsung Galaxy S9+
Rom - Ultimate Rom v11.3
Magisk - v20.0 (Stable)
Kernel - ElementalX
Hi
Im back to stock after months of struggling with Lineage bugs.
All i need is viperfx, which improves internal speaker so much, whem properly configured !
I guess the only way to get it is by using magisk (i tried with a supersu root and a viperfx flash but it didnt work).
So I just spent many hours trying to get magisk to run properly but failed.
I flashed 17.1 in twrp, seemed to work, but it didnt find any module to install, so i updated magisk manager to latest version.
Then i was unable to run magisk manager, instant crash at launch, fc.
Any tip please ?
Thanks
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
fastboot flash boot IN2023_11_F13-Patched.img
Click to expand...
Click to collapse
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Thanks for this. Where can you download the oos13 firmware?
MR0808 said:
Thanks for this. Where can you download the oos13 firmware?
Click to expand...
Click to collapse
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Thanks. Looks like I'm getting IN2025, so will have to do the patched boot.img myself.
Time to find my old notes somewhere
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
GhostRider86 said:
Is your Fingerprint Sensor working with A13? Mine not.
I assume same issues as we had with A12 and USNF
Click to expand...
Click to collapse
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Neil_Armstrong_ said:
i kept all my magisk modules after the update which fix SafetyNet and Fingerprint issue, so i don't know
Click to expand...
Click to collapse
I keepted mine as well, SafetyNet and gPay are working, but Unlock with Fingerprint Sensor is not. No reaction to sensor at all, not able to register new Finger...
Edit: Working now. Needed to disable USNF module, no reboot, Fingerprint Sensor working, register Fingers, screen lock, test, enable USNF module, enjoy
Neil_Armstrong_ said:
The update is available through Oxygen Updater app
First thoughts on OOS 13 are really positive, smoothness is the first thing I noticed, it's day and night with OOS 12
The UI revamp is very satisfying to me
Overall, it feels more polished than OOS 12, with the sense of details in every feature/setting, and some new unique features
Click to expand...
Click to collapse
I already have the fil, but I can't install it from system update apk,
am I missing something ?
EDIT:
re-downloaded the file again from Oxygen updater, but still it fails to install nd also "verification failed" in system local update.
Edit 2:
I re MSM back to OOS11 and upgraded directly to OOS 13 F3.
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
VBBoston said:
Hey guys, what version of Magisk (and branch) are you using to root OOS13?
I am still on 11.0.11.11 with Magisk 23.
What is the procedure to upgrade to OOS13 from OOS11 without losing root, Magisk modules and all my data?
I tried downloading full OOS12 using Oxygen Updater app, ran Local System Upgrade, it finished normally, then installed Magisk to inactive slot (after OTA) and rebooted BUT after reboot - the system stays 11.0.11.11. And the attempt to Local System Upgdate for OOS13 fails right on start.
What am I missing?
Please help
Click to expand...
Click to collapse
I updated from oos 13 unrooted. Lost my root using oos12
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
VBBoston said:
I was able to get OOS13 installed but now need to restore root.
Could someone please share
Magisk patched boot.img for Global OOS13 (IN2025_11_F.13) for rooting?
Thank you ~
Click to expand...
Click to collapse
They have already been shared here.
Thank you very much!
stell52 said:
Tanks you so much it worked for me.
Can we use google pay with this version rooted ?
Edit. Gpay works
Click to expand...
Click to collapse
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Neil_Armstrong_ said:
Hi there,
You can find attached the patched boot image for the first stable OOS 13 firmware (IN2023 = 8 Pro European/Global version)
Steps :
Unlock the phone bootloader
Install ADB and Fastboot on your computer
Download the patched boot.img below
Reboot your phone to fastboot mode and link it to your computer
Open a terminal prompt in the directory where the boot.img is located
type in the cmd
and press enter
Reboot the phone
Open the magisk app, hit Install then use the recommended method
Reboot and you're rooted
Google Drive
Click to expand...
Click to collapse
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
MrBloB said:
I have two problems:
1. Netflix and hotstar are not working.
2. Hdfc and Axis apps are not working.
Are they working for u ? I have tried a lot of fixes but couldn't get them to work. If someone can help it would be highly appreciated
Click to expand...
Click to collapse
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
MrBloB said:
I have rooted it successfully. Everything is working except Netflix, Disney Hotstar and a few banking apps. I have tried enforcing denylist, shamiko.etc. nothing is getting them to work.
If u have any fix please let me know.
Thanks
Click to expand...
Click to collapse
Flash Universal SafetyNet module in magisk (kdrag0n) and Magisk Bootloop Protector (just in case)
Check your status after a reboot with YASNAC from Play Store
Force the Magisk DenyList, and when configuring it, develop the apps and check all the tick boxes manually (to be sure)
Uninstall Netflix and install the latest .apk from APKMirror, can't help as other app (banking too) works fine
Isn't vanced dead ?
YouTube Premium Argentina is very affordable fyi ....
stell52 said:
To me vanced manager do not work when i try to install youtube vanced. It says that i tried to downgrade paquet but i did not. I uninstalled every youtube upgrade. If somebody know
Click to expand...
Click to collapse
stell52 said:
In magisk go to settings then make sure zygisk is checked and activate denylist. In the denylist check google services is check.
Then install the module universital safetynetfix v 2.3.1 by kdrag0n
To me netflix and other apps work.
In the google play store you have many apps that can check if your safetynet is verified after it. If its verified it should work
Click to expand...
Click to collapse
Yes i have done this. Tried shamiko as well. M passing safetynet checks, still it doesnt work.
I have been using canary successfully all week. Today I woke up to a message saying I needed to update magisk canary. When I clicked the message to open the app and see the issue it does the normal splash screen then disappears. Unlike the main version of magisk that changes it's icon and doesn't even try to open this tries. I have uninstalled and reinstalled and there is no difference. I still get su prompts when using new apps that require root, but the app itself will not open fully. Thoughts?
I was going to delete this post but I discovered downgrading from the newest magisk canary to magisk canary version 831a398b fixed everything, thought that info might help someone else.
The latest build fixes the crashing. 25208 works well.