Develop Bugs

bootloop on twrp

Hi,
i have a problem with my p2 i try to install lineage os but to install it i need to install twrp and that's okay but i restart the phone and now i have a bootloop on twrp
And the message :
failed to unmount '/data' invalid argument...
and i can't stop the phone and do nothing...
Can you help me please

Fangstergangsta said:
Hi,
i have a problem with my p2 i try to install lineage os but to install it i need to install twrp and that's okay but i restart the phone and now i have a bootloop on twrp
And the message :
failed to unmount '/data' invalid argument...
and i can't stop the phone and do nothing...
Can you help me please
Click to expand...
Click to collapse
Wipe everything. Then, Change data partition to ext4. Then, flash treble enabled LOS twrp first, then LOS 15.1 or 16

Miltonbaidya88 said:
Wipe everything. Then, Change data partition to ext4. Then, flash treble enabled LOS twrp first, then LOS 15.1 or 16
Click to expand...
Click to collapse
i can't do nothing, the phone reboot, go to twrp, display the error message and again reboot and i can't navigate into the twrp menues during the error message is displayed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.noelshack.com/2018-44-3-1540986051-20181031-123429.jpg
i find this to force reinstallation twrp but i work only with flashable zip but i can't find a flashable zip for kuntao:
https://forum.xda-developers.com/showthread.php?t=2383148
EDIT: Now i can go to twrp and i have flashed to ext4 now but i don't know what you want to do for:
"flash treble enabled LOS twrp first"

i have the same, one problem after i was flashing twrp. now i want to restore original rom, (i make a backup before to clean everythingh). I go to restore page, in the end i have message: restore ok, i restart, and after that appear logo lenovo, and finally, its going to bootloader page. it's not starting android system, everytime, restarting to this page (but in twrp after restore he say restoreOK). please, how i can restore in a good way, or maybe how i can install a new fresh rom ( i download one zip file from this site, for lenovo p2) without help of twrp, or with twrp but say no possible to install zip file.

I have the same problem when i flash lineage 16 and reboot it strts for a second then a pop up message show "type your password" then automatically boot in twrp and i was unable to restore for the backup caused bootloops....its my luck twrp working fine and i was able to flash the previous rom again without backup...
Can anyone help me to flash lineage 16 i have the same problem while flashing gsi rom...
Plzzz help me...
---------- Post added at 02:03 PM ---------- Previous post was at 01:39 PM ----------
ramymona said:
i have the same, one problem after i was flashing twrp. now i want to restore original rom, (i make a backup before to clean everythingh). I go to restore page, in the end i have message: restore ok, i restart, and after that appear logo lenovo, and finally, its going to bootloader page. it's not starting android system, everytime, restarting to this page (but in twrp after restore he say restoreOK). please, how i can restore in a good way, or maybe how i can install a new fresh rom ( i download one zip file from this site, for lenovo p2) without help of twrp, or with twrp but say no possible to install zip file.
Click to expand...
Click to collapse
Try to flash treble recovery for lenovo p2 twrp3.2.2-20180709kunato and clear all partition except internal and sd card then try to flash the rom...it should work

Finaly, i was at one service, and that guy make my lenovo to start again normaly, probably was using my backup file, but now everythingh is ok, excepting sim card. not working, even with sim inside, say: no simcard inserted... probably, the file with modem firmware, canceled... the guy from service tell me he cannot solve the problem. i was at another service, but they say need one week to check. Somebody can help me with this new problem? thanks.

Question GSI

Are there any owners who are sitting on GSI? What is the processor architecture? I really want to get away from OneUI. Judging by the asset, AOSP is not expected soon
Release Pixel Experience 11.0 v312 · ponces/treble_build_pe
Fix Extreme Battery Saver Linux denials Sync with Phh's AOSP v312 Sync with August sources of PE
github.com
UPD: I figured out the architecture of ARM64 A. Now, as I understand it, the vendor is first flashed and only then GSI ? There are generally people who use GSI, why not make an instruction?

Anyone with any GSI?

caffezim said:
Anyone with any GSI?
Click to expand...
Click to collapse
Yes. I have many other GSI.
We have arm64 a or ab, but everyone is talking about ab. The fact is that it will not be possible to simply put it. We have a dynamic section (super). I previously worked only with Vendor and that's it. Here is a completely different situation and I am powerless. I'm just in a stupor.

This phone uses arm64 cpu and a only partiton scheme, but because this phone is android 10+ only a/b GSI working.
Im flashing GSI by using these commands in TWRP:
1. This command sets system block device in r/w mode
Code:
blockdev --setrw /dev/block/dm-0
2. Using this command im flashing raw system.img
Code:
dd if=/external_sd/system.img of=/dev/block/dm-0 bs=256M
Or this command if system image is simg
Code:
simg2img /external_sd/system.img /dev/block/dm-0
3. Wipe data.
4. Reboot to system or flash gapps.
Also because this phone has android 11 only android 11+ GSI works ,excluding google android betas they never booted for me(maybe selinux issue)
I hope TWRP devs will add support for flashing system partition inside super partition like orange fox recovery already does.

map220v said:
Im flashing GSI by using these commands in TWRP
Click to expand...
Click to collapse
But how does it work without a vendor? I don't quite understand. Have you done a full wipe or not?

Realees56 said:
But how does it work without a vendor? I don't quite understand. Have you done a full wipe or not?
Click to expand...
Click to collapse
Android 8+ devices already have vendor partition provided by OEM. This device has VNDK version 30.
Yes i did full wipe (format data) it's should format userdata partition to f2fs (if it's formats to ext4 then use stock recovery to wipe data it's also wipes metadata)
Also it's seems this TWRP doesn't format metadata, use this command to format metadata after "format data":
Code:
mke2fs -t ext4 /dev/block/by-name/metadata

map220v said:
dd if=/external_sd/system.img of=/dev/block/dm-0 bs=256M
Click to expand...
Click to collapse
nothing happens after this command
upd:
I waited a little and the process was completed, I had to wait. I tried to put gaps - 70 error. Yes, and it does not load into the system. It constantly reboots, as if the system is not there. I downloaded this (underlined) Perhaps you need to download from vndklite?
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Realees56 said:
nothing happens after this command
upd:
I waited a little and the process was completed, I had to wait. I tried to put gaps - 70 error. Yes, and it does not load into the system. It constantly reboots, as if the system is not there. I downloaded this (underlined) Perhaps you need to download from vndklite?
Spoiler
View attachment 5405433
Click to expand...
Click to collapse
I think vndklite is for android 8 devices.
Try flashing system.img using this command:
Code:
simg2img /external_sd/system.img /dev/block/dm-0
If it's flashed without errors then system.img was simg.

map220v said:
I think vndklite is for android 8 devices.
Try flashing system.img using this command:
Code:
simg2img /external_sd/system.img /dev/block/dm-0
If it's flashed without errors then system.img was simg.
Click to expand...
Click to collapse
No, it's an error right away. But the fact is that the phone writes the size of 3.3 Gb after the substitution. I'm doing Format data and reboot. But the phone is still an eternal reboot

Realees56 said:
No, it's an error right away. But the fact is that the phone writes the size of 3.3 Gb after the substitution. I'm doing Format data and reboot. But the phone is still an eternal reboot
Click to expand...
Click to collapse
I think TWRP on this device has some problems with formatting data. I used wipe data in stock recovery to make gsi boot(also i had magisk flashed)

Does anyone teach step by step how to install a gsi please?

I am also interested in step-by-step instruction.
@Realees56 @map220v did you finally managed to make it run? I am tempted to try it with instructions above and write it down if I can get any support from you guys
If I will not like it, is it possible to go back to "stock" by flashing all packages with Odin, or TWRP, or there may be some complications?

madseason.live said:
I am also interested in step-by-step instruction.
@Realees56 @map220v did you finally managed to make it run? I am tempted to try it with instructions above and write it down if I can get any support from you guys
If I will not like it, is it possible to go back to "stock" by flashing all packages with Odin, or TWRP, or there may be some complications?
Click to expand...
Click to collapse
I have not been able to launch it, I need a more advanced recovery. And what we have now does not work well with partitions

With a little bit of agony I was able to install the GSI. The speed is impressive.
But not without bugs, a lot depends on the vendor

Question [URGENT] Failed to mount '/system_ext' '/product' '/vendor' '/odm' (Invalid argument)

Hello, the error described in the title appeared when i tried to dirty flash the Miui 13 update european version for the Poco F3 on top of Miui 12.5.7. Before flashing the rom i forgot to mount some partitions, including the cited ones, giving me the error. Now i can't mount the required partitions, can't flash the old system nor the newer and TWRP says there isn't an OS installed, as such it goes into a bootloop.
Does someone know what to do?
I tried using the MiFlash tool 2020.3.14.0 to flash the fastboot rom versionof Miui 12.5.7 but it outputs to "The name of the directory is not valid"

Pillow fan said:
Hello, the error described in the title appeared when i tried to dirty flash the Miui 13 update european version for the Poco F3 on top of Miui 12.5.7. Before flashing the rom i forgot to mount some partitions, including the cited ones, giving me the error. Now i can't mount the required partitions, can't flash the old system nor the newer and TWRP says there isn't an OS installed, as such it goes into a bootloop.
Does someone know what to do?
I tried using the MiFlash tool 2020.3.14.0 to flash the fastboot rom versionof Miui 12.5.7 but it outputs to "The name of the directory is not valid"
Click to expand...
Click to collapse
No doubt you have, but just to check... you have extracted to .tgz file to reveal a .tar, which also needs extracting (i use 7zip) until you have a folder that contains the images folder etc etc.
Also, it could help having Mi Flash and the above folder containing the images in the root of C drive, rather than deep in the drive with a long title - eg D:\ANDROID\Xiaomi\alioth_global_images_V12.5.6.0.RKHMIXM_20220210.0000.00_11.0_global
EDIT: oh and be sure to uncheck the flash all and lock option in MiFlash (bottom right corner), or your bootloader will be locked after flashing...

reg66 said:
No doubt you have, but just to check... you have extracted to .tgz file to reveal a .tar, which also needs extracting (i use 7zip) until you have a folder that contains the images folder etc etc.
Also, it could help having Mi Flash and the above folder containing the images in the root of C drive, rather than deep in the drive with a long title - eg D:\ANDROID\Xiaomi\alioth_global_images_V12.5.6.0.RKHMIXM_20220210.0000.00_11.0_global
EDIT: oh and be sure to uncheck the flash all and lock option in MiFlash (bottom right corner), or your bootloader will be locked after flashing...
Click to expand...
Click to collapse
I just controlled and it seems what i did while trying to flash the fastboot rom is completely wrong since i tried to flash the recovery version. I have downloaded the fastboot rom now but i will have to try to install it tomorrow

The rom was flashed succesfully this time but it still goes into the mi recovery when trying to boot. i flashed twrp to see if i could flash the rom from there and now all partitions can be mounted except for /data. When trying to decrypt it using the pin passcode it says Password Failed. is it because i also had the fingerprint and face unlock? When i still couldn't mount the other partitions I always used the pin passcode to decrypt storage. Has the passcode been changed when flashing with the mi flash tool? I don't have a recent system and data backup nor a backup of the internal storage so this issue is devastating to me, i want to save my data at all costs
EDIT: I tried reflashing twrp from fastboot and now I also can't mount the /cust partition with error "Structure needs Cleaning"

Perhaps someone else may offer some better advice, but as far as I can tell your original system is gone. Once you accept this sad fact, you need to flash fastboot rom using miflash choosing the option 'clean all' (NOT CLEAN ALL AND LOCK) to flash the system clean again, after flashing you can expect an error that miflash couldn't lock the device, this is usual. then your device will restart and take quite a few minutes to boot again. don't bother to flash twrp again yet, just the system running first

reg66 said:
Perhaps someone else may offer some better advice, but as far as I can tell your original system is gone. Once you accept this sad fact, you need to flash fastboot rom using miflash choosing the option 'clean all' (NOT CLEAN ALL AND LOCK) to flash the system clean again, after flashing you can expect an error that miflash couldn't lock the device, this is usual. then your device will restart and take quite a few minutes to boot again. don't bother to flash twrp again yet, just the system running first
Click to expand...
Click to collapse
So i have to accept that all my data is gone? No chances of decrypting the data partition? I'll wait and see if someone has something that could work, if nothing else does i guess i'll have to accept the reality. Thank you anyway

I experienced pretty much the same thing as you in the past (i.e. 'failed to mount' and 'no OS installed' errors); unfortunately, the internal storage is most likely wiped. Happy to be corrected for your sake, but I am in agreeance with @reg66.
EDIT: formatting

Sauceunny said:
I experienced pretty much the same thing as you in the past (i.e. 'failed to mount' and 'no OS installed' errors); unfortunately, the internal storage is most likely wiped. Happy to be corrected for your sake, but I am in agreeance with @reg66.
EDIT: formatting
Click to expand...
Click to collapse
TWRP doesn't display the "OS not installed error" and before flashing the fastboot rom version the data partition could be decrypted normally with the lockscreen passcode. Does this mean that Mi Flash encrypted the data partition with a different key?

Thank you to @reg66 and @Sauceunny , I have decide to wipe the memory of the phone as i have deemed it to be too much work to save some chats and images while the most important files are stored as a backup. I will have to plan the next update or changing rom more thorougly next time.

I have the same problem with my S21 ultra
Error on product, vendor and ODM
So i can't install stock ROM because of this error.
Doesnl anyone have an idea?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i cant mount system
i use poco f3
cant someone help me for fixed
how tp fixed..
please help

I'm facing the same errors except "Odm" I don't know what to do I tried to flash pixel experience rom in my mom's redmi note 10 using "twrp" it's just just in it. Please help me out

Download fastboot rom, use miflash to flash it (select clean all without lock) and dont play with mom's phone again. Watch a miflash tutorial on youtube if you're new to this.

Trying to install Kali Nethunter on OnePlus 7T unable to mount partitions error

Hello thanks for reading,
I've spent about 2 days trying to figure this one out so any help would be greatly appreciated.
I've flashed it back to stock rom "hotdogb_14_O.22_210127.ops" with the MSM tool and flashed recovery TWRP to it, but I am consistently receiving the error
" Failed to mount '/system_ext' (Block device required)" in TWRP when i'm trying to write zip files and disable encryption.
when it comes to install anything, I get this same message and it fails - where am I going wrong? i've tried wiping it and repair as ext4 but nothing, same deal... any ideas?
Thanks in advance

tehnooks said:
Hello thanks for reading,
I've spent about 2 days trying to figure this one out so any help would be greatly appreciated.
I've flashed it back to stock rom "hotdogb_14_O.22_210127.ops" with the MSM tool and flashed recovery TWRP to it, but I am consistently receiving the error
" Failed to mount '/system_ext' (Block device required)" in TWRP when i'm trying to write zip files and disable encryption.
when it comes to install anything, I get this same message and it fails - where am I going wrong? i've tried wiping it and repair as ext4 but nothing, same deal... any ideas?
Thanks in advance
Click to expand...
Click to collapse
Use twrp v1 on twrp.me ?
Download TWRP for hotdog
Download TWRP Open Recovery for hotdog
dl.twrp.me

HueyT said:
Use twrp v1 on twrp.me ?
Download TWRP for hotdog
Download TWRP Open Recovery for hotdog
dl.twrp.me
Click to expand...
Click to collapse
Giving it a try right now, fingers crossed, I used a different version that boots before but not this one it seems. I'll let you know
Thanks for your time replying

Use twrp v1 on twrp.me ?
HueyT said:
Download TWRP for hotdog
Download TWRP Open Recovery for hotdog
dl.twrp.me
Click to expand...
Click to collapse
Didn't work, same issues, i'm at my wits end someone help me pretty please! Here's a screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does this no matter what I install, even if I go to format and wipe data always fails at that point, what command or trick am I missing guys? *begs*

Bootloader unlocked?

HueyT said:
Bootloader unlocked?
Click to expand...
Click to collapse
Yeah, all unlocked and ready to go else wouldnt let me boot into twrp without that first. I tried it with the latest version of android 11 and it didn't have the same message but still gave me a cant mount /opm (or something close to this) error message.... I feel like its something simple that I just lack the knowledge of

tehnooks said:
Yeah, all unlocked and ready to go else wouldnt let me boot into twrp without that first. I tried it with the latest version of android 11 and it didn't have the same message but still gave me a cant mount /opm (or something close to this) error message.... I feel like its something simple that I just lack the knowledge of
Click to expand...
Click to collapse
Did u "mount data" while in twrp before formatting data?

Morning Huey, No I did not, I am about to try it again right now just restoring via MSM and i'll give it a go
I've been following the guide at https://www.kali.org/docs/nethunter/installing-nethunter-on-the-oneplus-7/
but it's not for the 7T so maybe theres something missing, ive even tried using the older versions they suggest on there with no luck so far

HueyT said:
Did u "mount data" while in twrp before formatting data?
Click to expand...
Click to collapse
doesn't let me mount data before formatting data ;(

tehnooks said:
doesn't let me mount data before formatting data ;(
Click to expand...
Click to collapse
Remove screenlock before rebooting into twrp as your twrp is not decrypting data on 11.0.9.1

I'm downgraded to the last android 10 version as the guide says (but for hotdog) but always get the same error no matter what, I never set a screenlock or password or even a fingerprint, will update to 11 and latest update and try it again but it said can't mount /opm or something similar doing it that way. I feel like i'm just missing something really simple about the whole thing but i've followed the guides to a T

Question Miui encrypted all my data!

Hello fellow F3 owners, I need your help
A few days ago, I dropped my phone and broke the screen. I wanted to backup all files to my pc so I connected the phone to my computer, but before I did so, I restarted the phone, I have no idea why I did that. Upon the completion of the restart, I get the message "Wait Until Your Device is Fully Rebooted Before Opening Apps" when I try to open any app whatsoever.
When I open the phone, at the lockscreen, I have a pattern that I successfully insert, and the phone opens. The same pattern in TRWP does not decrypt the data.
Given the fact that it accepts the pattern password, I think that if I had a USB connection I would have managed to recover decrypted content from the internal storage space of the phone. Or is the error I'm getting caused by the fact that the content is now encrypted and the apps can no longer read it?
If so how can I recover all the encryption keys to backup them, and then how can I try to fix this problem? Or if the keys have been altered, can they still be generated again (if the phone is the same, as well as the IMEI or serial number, etc.)?
I understand that if I solve this problem, I will either recover my phone as before or at least I can decrypt and access the data and make a backup.
It is very frustrating to see that the necessary information is still there, but I cannot access it.

"Wait until your device is fully rebooted"
What specifically is showing that message? The OS (MIUI) or what? Is it a notification or a popup?
Modern Android has encrypted /data by default. This is on every phone nowadays.
If TWRP isn't showing your files, despite having entered correctly your password, try OrangeFox Recovery instead: https://orangefox.download/device/alioth
The "recovery.img" inside the ZIP is fastboot bootable. Else, you can flash the ZIP to install OrangeFox Recovery.

Boot into your phone normally and then remove the pin/ pattern to disable secure lock. Now if you boot into TWRP, it won't ask for pin/ pattern.

Sounds like your recovery is built for a different android version. Sometimes android updates make changes to the encryption process - this happened with A12 release, but not A13 - so if your recovery decrypts using the A11 method it will fail even with the correct pass.

motbot said:
When I open the phone, at the lockscreen, I have a pattern that I successfully insert, and the phone opens. The same pattern in TWRP does not decrypt the data.
Click to expand...
Click to collapse
So easy. Just flash TWRP which can decrypt the android version you have.
You should also consider backing up your raw files to a hard drive or PC. Safer than backing it up with TWRP and facing the risk of not being able to recover them. TWRP can mess up sometimes.

laid1995 said:
So easy. Just flash TWRP which can decrypt the android version you have.
You should also consider backing up your raw files to a hard drive or PC. Safer than backing it up with TWRP and facing the risk of not being able to recover them. TWRP can mess up sometimes.
Click to expand...
Click to collapse
Yup I once lost vacation photos & videos, because TWRP copied them, showed no errors, but many of the files were corrupt. The photos had visible glitches and only few frames of my videos were playable by VLC media player.

cyanGalaxy said:
Yup I once lost vacation photos & videos, because TWRP copied them, showed no errors, but many of the files were corrupt. The photos had visible glitches and only few frames of my videos were playable by VLC media player.
Click to expand...
Click to collapse
Exactly. I ceased taking TWRP back ups.

laid1995 said:
So easy. Just flash TWRP which can decrypt the android version you have.
You should also consider backing up your raw files to a hard drive or PC. Safer than backing it up with TWRP and facing the risk of not being able to recover them. TWRP can mess up sometimes.
Click to expand...
Click to collapse
Thanks for the reply, how do I find the twrp that can decrypt the android version I have?

motbot said:
Thanks for the reply, how do I find the twrp that can decrypt the android version I have?
Click to expand...
Click to collapse
I gave you an OrangeFox link, try it.

cyanGalaxy said:
I gave you an OrangeFox link, try it.
Click to expand...
Click to collapse
Thanks, my screen is black now and unresponsive.
My PC Can't detect phone but I cant still control it with scrpy.
Problem is, I can't seem to transfer any files to my phone. Very ood.
This is what the error looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

What is your ROM?

motbot said:
Thanks for the reply, how do I find the twrp that can decrypt the android version I have?
Click to expand...
Click to collapse
Usually it's noted in the filename like [email protected]_1_A12.zip / [email protected]_0_A11.zip

motbot said:
Thanks, my screen is black now and unresponsive.
My PC Can't detect phone but I cant still control it with scrpy.
Problem is, I can't seem to transfer any files to my phone. Very ood.
This is what the error looks like:
View attachment 5851993
Click to expand...
Click to collapse
That's not Alioth

cyanGalaxy said:
That's not Alioth
Click to expand...
Click to collapse
Its not my device. Just a screenshot of the message I receive.
I will send when I get home exact same message from my device if needed

DarthJabba9 said:
What is your ROM?
Click to expand...
Click to collapse
Hey,
It's the default europe or global miui cant remember. (not xiamiu.eu)
Latest version available on poco F3