in lineage OS 17.1 installation guide there is written that rom version required is zui 3.5. bootloade. so, as my zui version is 2.5.104 ST, do i have to install ZUI 3.5 first before installing Lineage OS 17.1 or i can do Lineage OS 17.1 on zui 2.5.104 ST...
pls tell me
Flash ZUI 3.5 via QFIL. It's a requirement, else you'll get bootloop.
Thanks a lot Ritayan. I googled "Flash ZUI 3.5 via QFIL" but without any success. Found a XDA thread but the download links r dead.
Unlocked the bootloader, flashed twrp & magisk but can't install this lineage os 17.1
and as I have zero expertise and only follow step by step instructions, can I ask u to waste ur some precious time and help me out by giving some links where I can get the required files and the instructions to do it.
Tomar moto genius rai amar bhorsha .
pls help
:
Ritayan Roy said:
Flash ZUI 3.5 via QFIL. It's a requirement, else you'll get bootloop.
Click to expand...
Click to collapse
Thanks a lot Ritayan. I googled "Flash ZUI 3.5 via QFIL" but without any success. Found a XDA thread but the download links r dead.
Unlocked the bootloader, flashed twrp & magisk but can't install this lineage os 17.1
and as I have zero expertise and only follow step by step instructions, can I ask u to waste ur some precious time and help me out by giving some links where I can get the required files and the instructions to do it.
Tomar moto genius rai amar bhorsha
Related
I have tried most of the tutorial presented online and unable to complete the process, i consider its due to the latest version so help on this would be appreciated
thanks in advance
I followed this guide ( For OOS 3.1.2 and OOS 3.2.1 )
https://youtu.be/kGZyX9e7-C4
Sent from my ONEPLUS3
I used this sticky in the OP3 Guides section to achieve root on OOS 3.2.1 (and unlocked bootloader): http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
darack1234 said:
I have tried most of the tutorial presented online and unable to complete the process, i consider its due to the latest version so help on this would be appreciated
thanks in advance
Click to expand...
Click to collapse
Root method isn't changed from 3.2.0 to 3.2.1, what do you mean by unable to complete, please provide further detail as to what exactly you have managed and where it fails.
I came across chinese official oreo zui 3.xx, i want to know if there is a simple way to install it to my z2 plus Indian variant through recovery mode without installing a twrp recovery?
Also is it worth it to get oreo zui?
Oreo is much better rom than nougat. Yeh you can install it without unlocking bootloader and without installing twrp recovery. Good thing is you will still get your warranty as i have availed Warranty with china rom in it
sameer 100 said:
Oreo is much better rom than nougat. Yeh you can install it without unlocking bootloader and without installing twrp recovery. Good thing is you will still get your warranty as i have availed Warranty with china rom in it
Click to expand...
Click to collapse
I have Indian version as well so there is no update, I want to change to Chines version so Can you explain to us how to change Chines official stock rom? or link maybe, ty.
sameer 100 said:
Oreo is much better rom than nougat. Yeh you can install it without unlocking bootloader and without installing twrp recovery. Good thing is you will still get your warranty as i have availed Warranty with china rom in it
Click to expand...
Click to collapse
Please help me with the process or steps or may be a link to install chinese zui without twrp or bootloader unlock
https://youtu.be/87_2Omp6b3g
Here is the link u can watch it and install china version
I have asked him same questions u can see it was about 4months ago and sameer kalra is the name in comment
chitrarth said:
I came across chinese official oreo zui 3.xx, i want to know if there is a simple way to install it to my z2 plus Indian variant through recovery mode without installing a twrp recovery?
Also is it worth it to get oreo zui?
Click to expand...
Click to collapse
official chinese zui do not come with gapps you will have to install them later, gapps packages from opengapps don't work, you have to use google installer but they cause notification problems ..... all this problems not worth it, as you can install custom zui that have gapps but they will need twrp.
Hope this helps...
Read this thread https://forum.xda-developers.com/lenovo-zuk-z2/how-to/rom-zui-3-5-243st-z2-plus-z2-t3745636 about the official ZUI 3.5.xxx
You need access to PC + data cable to flash Chinese ZUI. Read that thread, pretty detailed information available on how to.
I did get myself the Oreo via that thread but Chinese ZUI isn't workable due to GApps issue. GApps are there in that ROM, but not the playstore. You have to install Playstore apk.
Not only that, usual ZUI issues are still there plus known issue like Contact sync etc. Lot of work to get it running.
I felt frustrated trying to fix things, then decided to drop the plan and went to other custom rom or simply switch back to stock ZUI 2.5.104 ST (Indian version).
lenovo z2 plus
Can i install the chinese zui without flashing or not?9
https://forum.xda-developers.com/le...t/deodexed-z2-plus-nougat-2-5-334-st-t3594483
If you're ready to install a custom ROM you could try jaguar ROM .. that's the same one I'm using ... Really smooth .. I'm on that ROM now for almost 4-5 months and I've had no problem whatsoever .. and I get regular updates too .. only thing is I need to download the update that is from XDA forum itself and dirty flash it from twrp that's it
Hers the Iink to the ROM .. you can check it out ..
https://forum.xda-developers.com/lenovo-zuk-z2/development/jaguar-oreo-8-1-official-t3734597/page761
@chitrarth
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
You should use treble twrp to install rom
JR Bautista said:
You should use treble twrp to install rom
Click to expand...
Click to collapse
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
update your bootloader to oreo?
JR Bautista said:
update your bootloader to oreo?
Click to expand...
Click to collapse
Yes, 0xC182
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
TeamMex said:
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
Click to expand...
Click to collapse
Ok, thanks, friend, I'm going to try it like that
MirandaEduardo said:
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
Click to expand...
Click to collapse
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
khanpatriot said:
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
Click to expand...
Click to collapse
Yes, this Is a link
https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view
Thanks alot
Oooppss one more query does software channel matter? I'm currently running lineage os 14.1 and i can't find the exact software channel of my device I'm little confused is it retus retail or some other channel. Can u plz help?
Hello, I am looking for you help, I am currently using LG G4 with RR Oreo rom, i do not have root or anything, just RR oreo twrp and gapps. What are the steps to go back to Nougat? I want to flash Freedom ROM https://forum.xda-developers.com/g4/...m-rom-t3630056
Can you please tell the the detailed steps with everything I need in order to install Nougat Freedom Rom ?
I am using the H815 variant and I don't know about my boot.img.
Also does that rom support Google pay and bluetooth calling?
Hi, at first sorry for my bad english.
I have ZUK Z2 since 2 years, the last owner had installed PACROM 6.0.1 with 3.18.20 kernel from fedor917 and TWRP 3.1.1.0.
Today I want to install ArrowOS 9.x, but i don't know what to do. Should I flash ZUI 3.5 first and then install ArrowOS? or Can I wipe all and install arrow without flash zui 3.5?
Regards
Karol_420 said:
Hi, at first sorry for my bad english.
I have ZUK Z2 since 2 years, the last owner had installed PACROM 6.0.1 with 3.18.20 kernel from fedor917 and TWRP 3.1.1.0.
Today I want to install ArrowOS 9.x, but i don't know what to do. Should I flash ZUI 3.5 first and then install ArrowOS? or Can I wipe all and install arrow without flash zui 3.5?
Regards
Click to expand...
Click to collapse
Install latest twrp flash rom .if u see blue screen after booting
U will have to qfil zui 3.5
JV Spartacus said:
Install latest twrp flash rom .if u see blue screen after booting
U will have to qfil zui 3.5
Click to expand...
Click to collapse
Thanks for quick reply, i have one question. There are 2 different methods of install zui 3.5:
1. using TWRP
2. using QFIL (according the guide, clean 2.5.104 must be installed earlier) LINK
Will it be work if I install ZUI 3.5 through TWRP ?
Karol_420 said:
Thanks for quick reply, i have one question. There are 2 different methods of install zui 3.5:
1. using TWRP
2. using QFIL (according the guide, clean 2.5.104 must be installed earlier) LINK
Will it be work if I install ZUI 3.5 through TWRP ?
Click to expand...
Click to collapse
No twrp one does not update firmware
No need for 2.5 just flash 3.5 via QFIL
JV Spartacus said:
No twrp one does not update firmware
No need for 2.5 just flash 3.5 via QFIL
Click to expand...
Click to collapse
Okay, I will try tomorrow, but why tutorial order to install 2.5 first? After flash ZUI should I unlock bootloader first and then flash arrow right?
Karol_420 said:
Okay, I will try tomorrow, but why tutorial order to install 2.5 first? After flash ZUI should I unlock bootloader first and then flash arrow right?
Click to expand...
Click to collapse
Yup
Thanks, i had little problems with qd loader 9008 drivers but finally i flashed arrowOS! and I didn't have to unlock the bootloader after flash ZUI, it was unlocked. Thread to close.