Develop Bugs

[ROM][Linux] Ubuntu Touch Preview on TF300T [WIP]

I am working on porting the latest upstream version and will update this post as things start working.
Things to do:
[DONE] Create boot image that boots into the Ubuntu Touch rootfs.
[DONE] Create Android container started by Ubuntu.
[WIP] Customize configurations and work on kernel and android system to make things work properly (e.g. audio).
[TODO] Setup apparmor security.
Testing, debugging and optimization...
Any help is welcome!
The information and images below are very out-of-date.
The port of Ubuntu Touch to our beloved TF300T is more or less working now.
Please see section "Known Issues" below.
And please read the instructions carefully, including the linked threads, before doing anything to your tablet that might result in a very expensive paper-weight.
Known Issues
Just listing major issues that are specific to the TF300T port.
This is not the place to discuss general issues with Ubuntu Touch.
Camera is broken.
Dock not fully supported.
There are probably more; please follow this thread and report any new issues you find.
Downloads
Please read the section "Installation" below carefully, if you are not sure what these files are.
That section also contains verbose information on the different bootloader versions.
The binaries are generated automatically by Jenkins.
Generally they are not tested and may be broken.
Please report any issues in this thread, so they can be fixed and broken binaries can be removed.
Bootloader 4.2
These are the latest binaries that should be up-to-date with respect to Canonical's binaries.
Well, sometimes allow a day or two...
Android Base-System
The Android base-system is a stripped-down version of CyanogenMod 10.1 with some additional patches.
This is, where the major effort for porting Ubuntu Touch goes into.
Ubuntu Touch Root FS
This is the Ubuntu Touch file system.
Flashing this ZIP will preserve network settings and the phablet home directory, if you had installed Ubuntu Touch before.
It should work for all devices, however a stripped-down version with some changes for our TF300T is provided.
Please see the list of changes below.
Media Files
These media files are part of Canonical's root fs, but they rarely (never?) change.
Splitting the media files into a separate image significantly reduces the size of the rootfs that receives regular updates.
Unless you manually remove /data/ubuntu, these files will persist re-flashing the rootfs.
Bootloader 4.1
These are out-of-date and are no longer being maintained.
They will be kept, till dev-host deletes them (30 days after the last download):
Android Base-System
Ubuntu Touch Root FS
The rootfs for bootloader 4.1 also includes the media files. There is no separate download.
Android Source Code
The patched repositories of the Android/CyanogenMod/Ubuntu source trees are available on GitHub.
For details, please see section "Building the Android Base-System from Source" below.
Ubuntu Touch Root FS Changes
The "official" Ubuntu Touch root fs does not quite work on our TF300T yet.
So a stripped-down version with the following changes is provided:
Run amixer on boot to fix mixer levels.
Disable save/restore of alsa settings.
Split media files into a separate image.
Remove several big and unnecessary files.
The official Ubuntu Touch image does work, but for these issues:
Flashing with TWRP fails.
For details, see the bug report on launchpad.
There is no sound, unless you adjust alsa mixer levels manually.
Rebooting from Ubuntu goes into a boot-loop.
When Ubuntu is properly shut down, it saves the current alsa settings.
Restoring them on the next boot crashes the system and causes the boot-loop.
Note that rebooting from Android or using adb works fine.
If you happen to run into the boot-loop, use the TWRP file manager (in the Advanced menu) to remove /data/ubuntu/var/lib/alsa/asound.state.
Installation
Please read the following instructions carefully, and make sure you understand each step and what it will do to your tablet.
The steps are working for me, but you are ultimately responsible, for what you are doing with your own tablet.
I will not be responsible, if you brick your tablet, or if your wife gets angry at you for being too preoccupied with your tablet.
Step 1: Unlock Your Tablet
If you want to give Ubuntu Touch a try, your tablet needs to be unlocked.
There are lots of threads helping with this, please use search to locate this information.
Step 2a: Which Bootloader Do I Have?
Unfortunately, Asus has released several incompatible bootloaders.
To find out, if you can use this port of Ubuntu Touch, go to the bootloader screen by holding the power and vol-down keys.
Once you see the bootloader screen with three or four icons in the center, check the long version number at the top of the screen.
It looks something like: "WW_epad-10.6.1.15.3-20130416".
The first two letters are your SKU and should not matter.
The version number following "epad" is what will be referred to in the following.
Version 10.6.1.15.3
This is the latest version from Asus, generally referred to as "bootloader 4.2" in the XDA forums.
The latest Ubuntu Touch binaries are developed and tested on this bootloader, so you should be fine.
Version 10.6.1.8
This is an older version of the bootloader 4.2.
The latest Ubuntu Touch binaries might work for you, though upgrading your bootloader is recommended (see below).
This version is known to cause issues with the latest TWRP recovery, so be careful.
Version 10.4.2.20
This is the old incompatible bootloader, generally referred to as "jb bootloader" or "bootloader 4.1" in the XDA forums.
The latest Ubuntu Touch binaries will not work for you, upgrading your bootloader is strongly recommended (see below).
Older binaries that work with this bootloader are still available for download though.
Any older version not listed
Your bootloader is really out of date and you should upgrade as soon as possible (see below).
Any newer version not listed
You are on uncharted territory. Proceed with care!
Let us know about your experience in this thread!
Step 2b: Upgrade Your Bootloader
If you have not yet installed bootloader 10.6.1.15.3, it is recommended to upgrade.
Please check the following threads (and several others; search might be helpful):
[GUIDE][26/04]Update/Recovery/Root/Downgrade Android 4.2.1 on Unlocked/Locked Devices
[HOW-TO] Upgrade or Downgrade to any stock JB Firmware
Step 3: Install TWRP Recovery
You need a custom recovery installed for flashing the Ubuntu Touch binaries.
Please check the following thread for getting and installing TWRP recovery:
[RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery!
Step 4: Backup and Wipe Your Android System
Before flashing Ubuntu Touch, you need to wipe some parts.
It is strongly recommended to make a backup of your Android system too.
Check section "Restore Android" below on how to restore it.
If you are running CyanogenMod 10.1:
Use TWRP to backup "boot" and "system".
Backing up "data" is not strictly necessary, but recommended.
Wipe "cache", "dalvic cache" and "system".
In TWRP 2.5 you should use "Wipe -> Advanced Wipe" and check the respective boxes.
Note that this will not wipe the contents of your "/sdcard" Android folder.
If you are not running CyanogenMod 10.1, but another ROM:
Use TWRP to backup "boot", "system" and "data"
Wipe "cache", "system" and "data".
In TWRP 2.5 you should use "Wipe -> Advanced Wipe" and check the respective boxes.
Note that this will not wipe the contents of your "/sdcard" Android folder.
Step 5: Flash Ubuntu Touch
If you want a clean start or you had installed Ubuntu Touch for bootloader 4.1, please remove /data/ubuntu manually before flashing.
You can use the TWRP file manager in the Advanced menu for that.
If you want to upgrade from a previous Ubuntu Touch for bootloader 4.2, please see section "Upgrade Ubuntu Touch" below.
Flash the following images (see above for downloads):
ubuntu-touch-system-XXXXXXXX-tf300t-bl4.2.zip
ubuntu-touch-rootfs-raring-XXXXXXXX-tf300t-bl4.2.zip
ubuntu-touch-media-XXXXXXXX.zip
Step 6: Reboot Your Tablet
Note that there is no boot animation yet, so the screen will be black, till the shell is starting up.
This make take some time, please be patient!
Restore Android
Boot into TWRP recovery.
Wipe "cache" and "dalvic cache".
Select the last backup done before installing Ubuntu Touch.
If you were running CyanogenMod 10.1:
Restore "boot" and "system".
If you were not running CyanogenMod 10.1, but another ROM:
Restore "boot", "system" and "data".
Reboot your tablet.
Upgrade Ubuntu Touch
Generally, the system and the rootfs can be upgraded individually.
However, sometimes Canonical introduces breaking changes, that require them to be upgraded together.
Upgrade ubuntu-touch-system-XXXXXXXX-tf300t-bl4.2.zip
If you are running an older version of that ZIP, you can just flash the new one.
If you have returned to your Android system, please follow "Backup and Wipe Your Android System" under "Installation" above before flashing the new ZIP.
Upgrade ubuntu-touch-rootfs-raring-XXXXXXXX-tf300t-bl4.2.zip
You can flash this ZIP anytime.
Network settings and the phablet home directory will be preserved. This includes the media files from the separate ZIP:
If you want to start clean, remove /data/ubuntu manually and re-flash both rootfs and media.
Upgrade ubuntu-touch-media-XXXXXXXX.zip
You can flash this ZIP anytime.
It will just overwrite existing files and add new files; old files will not be deleted.
If you want to start clean, remove /data/ubuntu manually and re-flash both rootfs and media.
Building the Android Base-System from Source
Basically you can follow the guide for building CyanogenMod with one exception.
Initialize your CyanogenMod source repository with:
Code:
repo init -u git://github.com/f69m/android -b phablet-10.1-tf300t
You can also run this command in an existing repository.

Thats great, but ...
f69m said:
Current Status:
Ubuntu Touch is booting and can be accessed via adb, but the screen stays black.
Click to expand...
Click to collapse
I have the exact same issue even on the official build released for nexus 4 ... The current release of Ubuntu is just such a mess, nothing more than a buggy preview with loads of fake apps and content, and very limited functionality.
I'd love to see Ubuntu on tf300, but I would say (in my humble opinion,) lets wait for a better release, and then we'll get started.

Shu. said:
I have the exact same issue even on the official build released for nexus 4
Click to expand...
Click to collapse
Oops, that is intersting, thanks!
I'd love to see Ubuntu on tf300, but I would say (in my humble opinion,) lets wait for a better release, and then we'll get started.
Click to expand...
Click to collapse
Agreed, if your interest is to have something to play with.
On the other hand, I'd like to see, what is already there and possibly help improve it by contributing to Canonical. And any work we do now will speed up porting, once there is a better release available.
Just trying some more Kernel tweaks after looking at the TF700 port that seems to work (see http://forum.xda-developers.com/showthread.php?t=2162472).

Re: [DEV] Porting Ubuntu Touch Preview to TF300T
Shu. said:
I have the exact same issue even on the official build released for nexus 4 ... The current release of Ubuntu is just such a mess, nothing more than a buggy preview with loads of fake apps and content, and very limited functionality.
I'd love to see Ubuntu on tf300, but I would say (in my humble opinion,) lets wait for a better release, and then we'll get started.
Click to expand...
Click to collapse
Agreed but I have gotten it up and running on my nexus 4 without much issue, its cool for about 20 min( being generous) but then you realize you can't actually do anything. I feel that its gonna be an awesome platform especially for a transformer tablet though if it goes where they say it will. Full Ubuntu when docked and then touch when not....sounds like what these tablets were made for.
Sent from my Nexus 4 using xda premium

Still not working build ? (
It's pity, i would like to try it, I know, that there is only something functions, but I can try the UI, and how it is look like
Maybe someone from TF700 thread who port it for TF700 can help us.

matonka007 said:
Still not working build ? (
It's pity, i would like to try it, I know, that there is only something functions, but I can try the UI, and how it is look like
Maybe someone from TF700 thread who port it for TF700 can help us.
Click to expand...
Click to collapse
Just checked the wiki.ubuntu.com/Touch/Devices site, looks like someone has committed to porting it. Though I wouldn't be in a rush to get it just yet seeing as it barely functional. I guess time will tell where this leads.

ColMustard said:
Just checked the wiki.ubuntu.com/Touch/Devices site, looks like someone has committed to porting it. Though I wouldn't be in a rush to get it just yet seeing as it barely functional. I guess time will tell where this leads.
Click to expand...
Click to collapse
lol, if you looked at the developer on the wiki you would realize that the developer on it is the originator of this post

Re: [DEV] Porting Ubuntu Touch Preview to TF300T
doubljdog said:
lol, if you looked at the developer on the wiki you would realize that the developer on it is the originator of this post
Click to expand...
Click to collapse
Yes I realized that after I posted this. Just pointing out that someone has committed to porting this.
Edit: Thanks for pointing out the obvious though,I'm sure nobody else would have figure this out
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD

So, is there someone working on it, or not?
I installed the one from tf700 on my tf300 and it works decent, except wi-fi, so I'm guessing its not that hard, but i'm not a dev..so...

How did you load the patch in your make file? I am adapting your patch to my device.

secosan said:
So, is there someone working on it, or not?
Click to expand...
Click to collapse
Yes, I am working on it, and so are some others.
I installed the one from tf700 on my tf300 and it works decent, except wi-fi, so I'm guessing its not that hard, but i'm not a dev..so...
Click to expand...
Click to collapse
That is interesting, thanks!
What happens on the tf300t using the CM tf300t base code is a segmentation fault.
The nv video drivers send a null file pointer to fputc() in the Ubuntu libc.
Just trying to do a quick fix, by building my own libc that silently ignores the null pointer, but that is sure not a final solution.
Eventually we need to figure out, where the null pointer comes from and avoid it.
I'll let you know, how it works, once the lenghthy ARM compilation has finished and I had a chance to try it.
WLAN is working fine, BTW, just the display is black.

giveen said:
How did you load the patch in your make file? I am adapting your patch to my device.
Click to expand...
Click to collapse
Are you referring to my patches on GitHub?
Not quite sure, what you are asking for.
Anyhow, the patches for the package makefile and for the kernel are on GitHub
https://github.com/f69m/ubuntu-touch-tf300t.
The changes to the Android repository manifest are described on
https://github.com/f69m/ubuntu-touch-tf300t/wiki/Build-Ubuntu-Touch-for-ASUS-Transformer-TF300T
Apart from those patches it is really the same as building CyanogenMod. Just faster, as only a part of the CM tree is built.
Does that answer your question?

Canonical started the daily building of Ubuntu Touch, good news I tryied the build for TF700 too, but it have bad DPI.
PS: f69m, I do not know about developing, but if I can help you write.

Re: [DEV] Porting Ubuntu Touch Preview to TF300T
f69m said:
Are you referring to my patches on GitHub?
Not quite sure, what you are asking for.
Anyhow, the patches for the package makefile and for the kernel are on GitHub
https://github.com/f69m/ubuntu-touch-tf300t.
The changes to the Android repository manifest are described on
https://github.com/f69m/ubuntu-touch-tf300t/wiki/Build-Ubuntu-Touch-for-ASUS-Transformer-TF300T
Apart from those patches it is really the same as building CyanogenMod. Just faster, as only a part of the CM tree is built.
Does that answer your question?
Click to expand...
Click to collapse
I was referring to the screen res patch, but I figured it out from your guide.
The problem I am having that my kernel not compiling with Ubuntu options even though I sent them in my defconfig.
They should be working but they are not.
Sent from my Nexus 7 using Tapatalk 2

What is this link?
http://ubuntuone.com/06vcR0nyoTd9DYb2OgRSlT
Is on https://wiki.ubuntu.com/Touch/Devices as Android Base image, it is your build f69m ?

matonka007 said:
What is this link?
http://ubuntuone.com/06vcR0nyoTd9DYb2OgRSlT
Is on https://wiki.ubuntu.com/Touch/Devices as Android Base image, it is your build f69m ?
Click to expand...
Click to collapse
Definitely not my build, I have no images out yet, but mine should be coming soon!
The entry in the device table was not added by me.

Woohoo, I am seeing something!
The Ubuntu package build for my patched libc is still running tests, but I pulled the libc.so binary from the build directory.
This is a manual hack right now, I need to repackage the root FS for flashing and then will make it all available via Dropbox.
Hope that will allow quick downloads for everyone.

It sound great
Yes, Dropbox is good choice
And http://d-h.st/is not bad for sharing files

f69m said:
Woohoo, I am seeing something!
The Ubuntu package build for my patched libc is still running tests, but I pulled the libc.so binary from the build directory.
This is a manual hack right now, I need to repackage the root FS for flashing and then will make it all available via Dropbox.
Hope that will allow quick downloads for everyone.
Click to expand...
Click to collapse
Oh and then also please dont forget to update the install instructions on the official ubuntu page and here because on Ubuntu it links to your building guide on Github

-angel* said:
Oh and then also please dont forget to update the install instructions on the official ubuntu page and here because on Ubuntu it links to your building guide on Github
Click to expand...
Click to collapse
Of course, l will make sure to update everywhere, once the image is released, though the entry in the Ubuntu wiki was not done by me.
Got a flashable filesystem now, but that version is crashing on me. Must be something small I am overlooking atm.
So taking a little break and then will finish with refreshed spirit.

[Linux] [Windows] [Unix] OTools - One a0001

OTools​------------------------------------------------------------------​
OTools is an opensource toolkit for windows and linux that helps you manage your oppo or oneplus device.
Click to expand...
Click to collapse
Code:
This program has enough knowledge to brick your device, destroy your computer,
void warranties, eat cats and burn your flowers.
The developer disclaim every damange caused from the usage of this program.
Supported devices
------------------------------------------------------------------​
OnePlus One
Oppo Find 7(a/s)
Oppo Find 5
Oppo N1
Features
------------------------------------------------------------------​
User friendly gui
Management features
Backup and restore (adb)
Push and Pull files
Import camera photos
Install apk
Record Screen
Shell
Modding
Root
Unlock Bootloader
Lock Bootloader
Backup EFS
Flash zip files
Install roms (optional backup)
Flash boot.img files
Install recovery
Root Mode
Dipendecies
------------------------------------------------------------------​
ADB
FastBoot
XTerm (only for linux amd64)
Downloads
------------------------------------------------------------------​https://github.com/linuxxxxx/O-Tools
Sources
------------------------------------------------------------------​
Github - Master
Windows
Linux (amd64)
Unix / Linux
Notes
------------------------------------------------------------------​
It's fully written using qt (c++), some parts are written in bash (batch for windows), if you want to compile, just import the sources into qt
It's not avaible yet, I just got my opo, so NO ETA
It's based on my XiaomiTool
Contributions and suggestions are welcome
XDA:DevDB Information
OTools - An opensource Toolkit for Oppo and OnePlus devices , Tool/Utility for the ONEPLUS ONE
Contributors
linuxxxx
Source Code: https://github.com/linuxxxxx/O-Tools
Version Information
Status: Alpha
Created 2014-12-25
Last Updated 2015-01-16

Placeholders are not allowed on XDA. When are you going to fully release it with a downloadable file?

TiVON said:
Placeholders are not allowed on XDA. When are you going to fully release it with a downloadable file?
Click to expand...
Click to collapse
There are sources, if u cannot live without compile it, I've written WIP

Not really a placeholder as source code is given.
Thanks!

linuxxxx said:
There are sources, if u cannot live without compile it, I've written WIP
Click to expand...
Click to collapse
justmpm said:
Not really a placeholder as source code is given.
Thanks!
Click to expand...
Click to collapse
Ah yes! My sincere apologies!
I was a bit too quick in judging, sorry. It's just that I am used to "Super Hax0r Skillaas Tools" placeholder threads, so I was expecting this to be one too.
Missed it
Will compile this evening, and report back if anything didn't work out for me.

Alpha released for unix and linuxamd64 (on Linux you may need qtwidget to make it start)
There are bugs and missing features!!
@ windows users: the code is (almost) ready, I just have to find a PC (or setup a VM) where I can compile and test this

Can u port this tools for Yu Yureka

ela1103 said:
Can u port this tools for Yu Yureka
Click to expand...
Click to collapse
Add a device support is pretty easy, so maybe

linuxxxx said:
Add a device support is pretty easy, so maybe
Click to expand...
Click to collapse
Waiting for the YU Yureka

OnePlus One DroidKit | by iTechy OPEN SOURCE! | No longer being maintained

Droidkit OnePlus One Windows
Hey guys iTechy21 here and I am glad to announce I have a NEW project I'm working on to make an open source toolkit made from c# to allow easy development for other devices. This project will aim to support as many devices as possible with different toolkits for different devices therefore unifying the experience between them.
This will also be 100% open source when fully complete and is released under the GPLV3 licence (apart from the stuff I did not develop e.g. Custom Recoveries, root.zip, adb / fastboot and stock software all rights go to their respective owners).
Features
Support for any android version and Rom
Full Backup and Restore of apps + data (Nandroid is in the works...)
Unlock / Lock your bootloader (removed locking due to possible issues)
Flash a custom recovery (all supported including stock)
Shows attached device(s) in status bar
Advanced CMD mode for power users - type any ADB Command you want!(Will be reimplemented!)
Booting the device into and out of fastboot with a button click
Flash back to stock (Lollipop!) and keeps your bootloader unlocked
To come
Flash 100% stock DONE!
Save backups with custom names DONE!
Install APK's through ADB DONE!
Flash zip via recovery commands DONE!
Improve UI to make it look cleaner...
Backup the EFS Partition (will be coming Soon) DONE!
Log screen to help amateurs with adb learn (and also output errors to be more verbose) Abandoned due to too many issues
Ability to change colour theme from light to dark and the colours (coming Soon™)
Improve OTA system (continuous)
I am accepting requests if they are not too obscure to find out (even better if you find a way to do it as it cuts down on my research time which I don't have a lot of )
Legal
This is an unofficial toolkit made by an independent developer who has no association with oneplus apart from the fact that he owns a 64gb Sandstone black phone. I cannot be held responsible for anything that may happen to your phone! Even if it is just exploding, catching fire or just voiding the warranty.
Changelog
Material 0.0.1.5 ) - Major Milestone! - Untested Oxygen OS flashing. Do-so at your own risk! (Might not work not fully tested)
Improved theming
Updates to internal .dll's
Stability improvements
UI Tweaks
More verbosity via dialogue messages
System requirements​To run this needs an x86 or x64 based system (Not supported on Windows RT)
And version 4.5 of the .NET framework (which is installed upon install if missing (needs testing!) and requires Windows 7 or Higher (sorry XP users )
Downloads​No Download as no longer maintained and buggy​QR for nerds
[QRCODE]http://repo.itechy21.com/toolkit.html[/QRCODE]
Known issues​You tell me...
XDA:DevDB Information
DroidKit | OnePlus One Windows *STABLE*, Tool/Utility for the OnePlus One
Contributors
itechy, All the helpful folks over at Stack Overflow
Source Code: https://github.com/Droidkit/OnePlus-One/tree/master
Version Information
Status: No Longer Updated
Current Stable Version: V0.0.1.5
Stable Release Date: 2015-09-17
Created 2015-03-16
Last Updated 2015-12-06​

FAQ
Q: How do I do X?
A: You click the button corresponding to the action
Q: How do I flash to stock and then unlock the bootloader?
A:
You put your device into fastboot mode.
Once done select your device model (16Gb or 64Gb) and then click flash to stock.
The Bootloader should stay unlocked after the flashing process...
Q: What Roms do this ToolKit support?
A: Any android based ROM with the ADB Debugging interface!
Q: Help it's not working!
A: Try 3 things.
Re-installing the toolkit to re-install the drivers
Enable ADB in the developer settings (tap on build number (in about phone) x times until you get a toast notification)
Update the ToolKit

I found a Bug!
Great and thanks for finding one! I can now hopefully track it down and fix it if you provide the following:
The Computer's OS
What you were doing
How you can reproduce this
Your device
The code from the message that appeared
This will help me track down and hopefully fix the error. And once open sourced these can be reported via GitHub!
Please be aware that messages that just say "HELP" or "IT CRASHED" will be ignored as they don't help...

GOOD JOB .....Bro

kishorparmar said:
GOOD JOB .....Bro
Click to expand...
Click to collapse
Thanks
I hope it isn't too buggy and it works for you

Anyone already try this tool? I want download, but size so damn high

zipperX said:
Anyone already try this tool? I want download, but size so damn high
Click to expand...
Click to collapse
I knew that would be an issue. That's due to the fact it includes all the stock files for CM11S. However I will make it possible by downloading it within the app unzipping it and then flashing the device. But I'm fairly novice at c# and I don't have a lot of time to develop at this moment in time...

Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up

timmaaa said:
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Click to expand...
Click to collapse
Thank you I'll finally get noticed for something XD

... It works great but the size is a big deal.
Also, i suggest that ... you show what version of recovery you will flash - TWRP ( is generic and the filename does not gives you clue, the same for the others )
Also, for the Stock firmware ( wich version is it ?! )
SuperSU is not updated ... you could improve and use the last stable from chainfire
all the other things looks great so far.

itechy said:
Hey guys iTechy21 here and I am glad to announce I have a toolkit I have made. This is my first toolkit and is currently still being developed (adding / tweaking features) to allow you to easily do basic adb stuff and more advanced things are coming when I have time to develop this :silly:
This will also be 100% open source when fully complete but is released under the GPLV3 licence (apart from the stuff I did not develop e.g. Custom Recoveries, root.zip, adb / fastboot and stock software all rights go to their respective owners).
Click to expand...
Click to collapse
Can we have more mirrors (faster ones)? Like MEGA? Google Drive is kind of slow :cyclops: Great work!:good:

ygor.almeida said:
... It works great but the size is a big deal.
Also, i suggest that ... you show what version of recovery you will flash - TWRP ( is generic and the filename does not gives you clue, the same for the others )
Also, for the Stock firmware ( wich version is it ?! )
SuperSU is not updated ... you could improve and use the last stable from chainfire
all the other things looks great so far.
Click to expand...
Click to collapse
Thanks for the feedback. I may improve that make to another form with information on the specific versions (along with a built in download tool). Along with updating the SuperSU.zip
The first thing I'll do is work on that once all the basic features are there. But generally its the latest version of TWRP that is stable along with the other recoveries...
As for the stock I think the one I included was 44s but it may be 5Q (ew). Ill be implementing a downloader for the stock images to download whatever the latest version is from cyanogen...
sabrefresco said:
Can we have more mirrors (faster ones)? Like MEGA? Google Drive is kind of slow :cyclops: Great work!:good:
Click to expand...
Click to collapse
I'll see what I can do but the size will be reduced in the next update as it will remove the stock zip and replace it with a downloader which will download the stock images and then flash them reducing the size massively... (but I use Gdrive as its easy to find the download link unlike with Dev-host...)

I can´t flash twrp with this toolikt any one have a clue?

Do you have the adb drivers installed? Or is it throwing an error?

Updated to fix issues, add ota support, install APK's and improve performance
Sent from my A0001 using Tapatalk

Is "fully complete" v1.0.0? I'd love to stretch my C# muscles a bit.
EDIT: I can't read. Sorry.

dont worry about it
we always have moments... Its almost ready but I don't have a lot of time to develop so it may take me a while to get everything in there....
Just improving the ota updater now as its throwing exceptions...

Download link is not working. Please re-up. Thanks

godzulu said:
Download link is not working. Please re-up. Thanks
Click to expand...
Click to collapse
+1

If anyone has this file, send it to me and I can host it on one of the servers I rent. If we use a Dropbox link, it's going to get so much traffic that the persons account will get suspended.

[TWRP][OFFICIAL][3.2.2-0] TeamWin Recovery For Moto E4(woods)

TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.​
​
What's new in 3.2.2-0:
</> CHANGELOG : ? </>
Code:
Code:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
</> DOWNLOAD ? </>
https://twrp.me
​
$ TIP $
You can update it from previous TWRP recovery if you already have it installed, else install it as fresh by using adb or Official TWRP Installer app from google play store or similar
​
To flash with Fastboot/Adb:
Code:
Code:
make sure OEM-Unlocking is ON
$ adb reboot bootloader
$ fastboot flash recovery twrp-3.2.2-0-woods.img
To contribute:
TWRP Code Review
TeamWin
XDAevDB Information
Moto E4 ROMs, Kernels, Recoveries, & Other Development
Contributors
iykeDROID™ {dumbDevpr*}
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created: 2018-07-12
Last Updated: 2018-07-13

Great news. Now I'm waiting for stable and fully working Oreo ROM and start flashing.

ka4o_pi4a said:
Great news. Now I'm waiting for stable and fully working Oreo ROM and start flashing.
Click to expand...
Click to collapse
from the looks of things on my side, i don't think that will happen in anytime too soon.
let's just hope for a God sent dev to take over the Moto E4(woods) development .

if any bug with the TWRP, create/open an issue regarding such bug on GitHub :
https://github.com/omnirom/android_bootable_recovery
( make sure to see how other issues were created and follow such trend )
thanks

I am getting a wrong architecture error (error 64 in twrp) when trying to flash ARM gapps.

EstebanxZ said:
I am getting a wrong architecture error (error 64 in twrp) when trying to flash ARM gapps.
Click to expand...
Click to collapse
wait for next update or use this at your own risk
https://t.me/motoe4woods/12179

Same here. Wrong architecture. Even the backup was corrupted and I wasn't able to flash back my stock ROM. This is my last Motorola device.

ka4o_pi4a said:
Same here. Wrong architecture. Even the backup was corrupted and I wasn't able to flash back my stock ROM. This is my last Motorola device.
Click to expand...
Click to collapse
i used it to install Both XOSP & Gapps Pico today.

Few days ago I was spent my day on trying to flash some ROM, but didn't manage to flash any (Pico,nano, micro, etc) gapps... All finished with the same error 64. Then I install last beta of twrp and successfuly install gapps, but can't boot into system (boot into recovery every time).

ka4o_pi4a said:
Few days ago I was spent my day on trying to flash some ROM, but didn't manage to flash any (Pico,nano, micro, etc) gapps... All finished with the same error 64. Then I install last beta of twrp and successfuly install gapps, but can't boot into system (boot into recovery every time).
Click to expand...
Click to collapse
please your issues on that specific ROM's thread.
As far as i know, the TWRP recovery works fine even before the unofficial beta... woods has come to it's best so far.
thanks.

Already do that. Also try with two or three different ROMs and get the same error. Doesn't matter, I'LL wait for some more stable version of twrp and some ROM.

Tks
Thanks man!

Laruzzo said:
Hi, this TWRP version to Moto E4 woods is not good.
It does not install GAPPS, and do not install SUPER SU.
With GAPPS the error is about 64 bits version. And with supersu it says that "Bad recovery no Unzip."
I tried with a unnoficial version and worked everything.
Please update in TWRP site to a new version with bug fix.
Look a this thread with the version that worked with Moto E4 woods.
https://forum.xda-developers.com/mo...rp-3-1-1-r1-port-xt1760-t3772249/post76177524
Click to expand...
Click to collapse
Dude,
learn how to read a full post with instructions & proper way of reporting an issue anywhere you find yourself.
Know you device SoC, Architecture, etc ... don't just talk any how.
also, commits has not been merged
see on gerrit.twrp.me :=> https://gerrit.twrp.me/#/c/android_device_motorola_woods/+/63/
Finally, always check to see if no one has report similar issue and been solved before you start writing sh*t into the air
https://postimages.org/
https://forum.xda-developers.com/showpost.php?p=77250466&postcount=6
NOTE : MOTO E4 SERIES IS ARM(32bit) Architecture Device, stop trying to flash/install ARM64 Gapps as you stop being dumb.

OK
Ok, I´m sorry you are the developer and I should thanks for your great work. May you please share here the alternative file that works with gapps? Because I cannot access telegram at the momment. Thank you very much and sorry again if my words was not good. I respect and admire your work.

Laruzzo said:
Ok, I´m sorry you are the developer and I should thanks for your great work. May you please share here the alternative file that works with gapps? Because I cannot access telegram at the momment. Thank you very much and sorry again if my words was not good. I respect and admire your work.
Click to expand...
Click to collapse
Download ⍖ ?
TWRP-323.0-Unofficial-woods.img

iykeDROID™ said:
TWRP is an open source, community project.
..
..iykeDROID™[/URL] {dumbDevpr*}
Source Code: https://github.com/TeamWin
[/SIZE][...his other way cause I doubt about official ¿‽​
Click to expand...
Click to collapse

Abish4 said:
Format Data Partition with F2FS format is not available which is usually available with every Moto Device Kernel
Click to expand...
Click to collapse
please deal with the kernel source here : https://github.com/MotorolaMobilityLLC/kernel-mtk/tree/nougat-7.1.1-release-woods
Abish4 said:
Can you help with this other way cause I doubt about official ¿‽
Click to expand...
Click to collapse
due to negligence, you couldn't check the source code here : https://github.com/TeamWin/android_device_motorola_woods
also check the twrp site : https://twrp.me/motorola/motorolamotoe4.html

I cannot flash gapps arm 7.1.x

Hi. I have one MotoE4 XT1763 Mediatek MT6735 with unlocked bootload.
would you recommend flashing the
twrp-3.2.3-0-woods.img 15.1M
Or the
TWRP-323.0-Unofficial-woods.img 15.5M
for the Lenovo Moto E4(XT1762)
?
Thank you peoples. TWRP unofficial working fine

Hey peoples. Accidentally i wiped my system. I have a backup in pc. I dont have sd card right now. How can i put the backup wich is in pc back to TWRP backup folder in order to restore ?

Shieldroot Tools Have Leveled Up!

Hi friends~!
Shieldroot has Leveled Up and No longer Requires an External Hard Drive!
Please remember to change the IP address in ADBCONNECT
DOWNLOAD: https://mega.nz/file/QQpUUSba#Q17teRIq2IUJNk-qTe-3qfgYwXlz4VcX9KtPjHERSWI 1.6 GB ZIPPED
GOOGLE DRIVE: https://drive.google.com/file/d/1FusTaAJ5oCNXbYQ_58xgXPMYfRg0Qy0m/view?usp=sharing
I have cleaned up the clutter in our previous edition of Shieldroot, as well as updated the adb tools for us. I have also included new code for easily wiping all your partitions, to ensure you have the smoothest Sailing.
I will post the link when its finished updating, i just needed a placeholder for all this crap~!
VIDEO GUIDE:
This is a never ending WIP (work in process) so Enjoy The Ride XD
FOR THOSE THAT NEED IT:
~! whyyyy IT's MaGiC
My stumblez along the Way
You Must be Familiar with this Method Please Before Using the new Tools
Root Nvidia Shield TV Pro 2019 Version
THIS IS OUTDATED https://forum.xda-developers.com/t/bootmod-root-your-shield-in-1-minute-2015-2017-2019.4524873/ REPLACES THIS IF YOU WANT ANDROID OR USE THIS GUIDE...
forum.xda-developers.com
I want to thank my New friend, Dawn!!! They showed me the way~!
nooted1
forum.xda-developers.com
With majisk Modules, by sharing some awesome github repos. I will link those soon
This one IDK What it is But I will find out~!
magisk_files/app-release.apk at alpha · vvb2060/magisk_files
Contribute to vvb2060/magisk_files development by creating an account on GitHub.
github.com
Adguard
https://download.adguard.com/d/18673/adguard.apk
A Magisk Repository For Enabling User Added Certs
GitHub - Magisk-Modules-Repo/movecert: movecert
movecert. Contribute to Magisk-Modules-Repo/movecert development by creating an account on GitHub.
github.com
GET TO KNOW ME IF YOU DARE~!
Hello New Friends!
My name is Jen. Long time lurker, recent poster here the last few months. I recently had a stay at the hospital due to a fever I had for four days, In those four days I had entered a stage of psychosis, Long story short, I Recovered, shed...
forum.xda-developers.com

Friends~! I don't have the Time to port these over to the 2015, 2017 versions. I ask someone who follows those forums please take the shieldroot tools and make them your own, it's all open source <3

And that's a wrap, we all updated here B0IS part 2 figuring out what the effs to do with the modules... coming sooon tee hee~!

jenneh said:
This one IDK What it is But I will find out~!
magisk_files/app-release.apk at alpha · vvb2060/magisk_files
Contribute to vvb2060/magisk_files development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
This is a modified Magisk branch which re-adds MagiskHide functionality

nooted1 said:
This is a modified Magisk branch which re-adds MagiskHide functionality
Click to expand...
Click to collapse
Le HAWT ~!! I am taking a break from the shield today, to play with and fix NOX, but I'll look at this again tom after work~! Thank you, Dawn!

I was successful with what I wanted to do today in Nox: https://forum.xda-developers.com/t/fully-cracked-nox-android-emulator.4381833/
Future endeavors will involve learning the poison they put in virtualbox, to ammend that, then cannibalize the executable, as well as attempting to inject a bootloader somehow~! Practice for our Shield, Tee-hee~!

jenneh said:
I was successful with what I wanted to do today in Nox: https://forum.xda-developers.com/t/fully-cracked-nox-android-emulator.4381833/
Future endeavors will involve learning the poison they put in virtualbox, to ammend that, then cannibalize the executable, as well as attempting to inject a bootloader somehow~! Practice for our Shield, Tee-hee~!
Click to expand...
Click to collapse
hey, can you please make a howto explaining how to go back to nvidias shield tv pro own build? right now I’m on your build but I want to install latest nvidia shield tv pro android update

KinkyGolab said:
hey, can you please make a howto explaining how to go back to nvidias shield tv pro own build? right now I’m on your build but I want to install latest nvidia shield tv pro android update
Click to expand...
Click to collapse
Yes I promise to do so with the release of my roms. I'm trying as hard as I can to fix my driver issue I just got the certificate signing software's programmed and built the driver I just need to sign it today and if it doesn't work I will revert back to Windows 10 so that I can make that rom for you guys

@KinkyGolab here's a recovery kit, just run erase all partitions, then recovery, and you're set~! if you want the boot locker code turned off, reboot into fastboot after running recovery then run the lock bootloader command
RECOVERY.zip
drive.google.com