This is a file in which you can use youtube ad freely
And PiP in oreo without YouTube RED subscription
#This is not my work
I just configured the files exact file for Oreo and edited it:victory:
Procedure
1.Download the Folder.zip from link given below
Extract it ( make sure that the folder name should be 'Folder')
2. Disable/uninstall YouTube app
3. Go to TWRP and flash iYTBP-vanced-universal-installer-v2.8.zip which is in that folder
4. Reboot
Note : Do not upgrade YouTube appfrom playstore after installation
:laugh:
Downloads https://www.androidfilehost.com/?fid=746010030569951005
Files should Look like this After Unzipping
Pip
Error while flashing
Ritik17 said:
Error while flashing
Click to expand...
Click to collapse
Do you uninstalled youtube ??
aswin620002 said:
This is a file in which you can use youtube ad freely
And PiP in oreo without YouTube RED subscription
#This is not my work
I just configured the files exact file for Oreo and edited it:victory:
Procedure
1.Download the Folder.zip from link given below
Extract it ( make sure that the folder name should be 'Folder')
2. Disable/uninstall YouTube app
3. Go to TWRP and flash iYTBP-vanced-universal-installer-v2.8.zip which is in that folder
4. Reboot
Note : Do not upgrade YouTube appfrom playstore after installation
:laugh:
Downloads https://www.androidfilehost.com/?fid=746010030569951005
Click to expand...
Click to collapse
You can even download it directly from Magisk Repo. You just have to search for iYTBP and two variants will show up in Magisk.
aswin620002 said:
Do you uninstalled youtube ??
Click to expand...
Click to collapse
I followed the instructions.
Ritik17 said:
I followed the instructions.
Click to expand...
Click to collapse
Flshed magisk ??
It's easier if you've installed Magisk. Just download the iYTBP module from the Magisk repo and install.
But make sure you don't have the YouTube app installed before doing this.
In pixel experience it didn't flash via magisk module also didn't work I'm following instructions
Xposed module works also.
try it
I'm getting a Oneplus 7T and so over the past week I researched debloating without Root. Here is what I have found:
https://forum.xda-developers.com/oneplus-7t/how-to/debloat-via-adb-root-t4018801
https://forum.xda-developers.com/oneplus-7-pro/how-to/debloat-root-via-adb-t3946625
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/
https://www.xda-developers.com/disable-system-app-bloatware-android/
I know the second link is in the OP7Pro forum so is it applicable to OP7T as well?
I also noticed this link that has three levels of debloating but does require Root:
https://forum.xda-developers.com/on...ebloat-tomatot-debloater-1-0-battery-t3934445
Can the bloatware listed in the Invisable, Light, and Extreme scripts somehow be removed through ADB without Root?
I got my 7T last week too, i have removed / disabled some so said built in app by adb command method (without root). I think you don't need to worry about whether it is 7Pro or 7T. As long as the app are installed in your mobile and the command is correct it will be removed or disabled. otherwise nothing will be changed (i.e. rejected)
Can the bloatware listed in the Invisable, Light, and Extreme scripts somehow be removed through ADB without Root?[/QUOTE]
I think you can download those zip files, unzip and cross check which app(s) you don't need and do it in ADB mode.
if you want to see all the apk in your 7T, you can type
pm list packages
Got it. Thank you for the reply!
This is a copy of my question on SO.
I want to remove Google apps and services on a new Fairphone 4 (Android 11, now rooted using Magisk. No TWRP build available yet.).
To this end, I am trying to use microG. In the Prerequisites for its usage, signature spoofing and deleting files in `system/priv-app` are listed. For signature spoofing, I followed the *XPosed solution for Android 11 and 12* listed here, i.e. using Magisk + riru + LSPosed + a FakeGApps fork. Not sure, whether or not this worked. All individual steps reported success, but the Signature Spoofing Checker says it didn't work.
Anyway, I'm definitely stuck at the second step, because I don't seem to be able to delete any files in `system_ext/priv-app`. I tried the solutions proposed here and here.
If I try
Code:
adb shell
su
# then confirm on the phone, then
mount -o rw,remount /
I get '/dev/block/dm-0' is read-only. Similar error (with dm-1) if I try mounting /system_ext.
adb root or adb disable-verity don't work, because it's a user build: adbd cannot run as root in production builds, verity cannot be disabled/enabled - USER build.
I even tried to write a Magisk module to replace the directories in question with empty ones, by putting the following in the customize.sh:
Code:
REPLACE="
/system_ext/priv-app/GoogleFeedback
/system_ext/priv-app/GoogleOneTimeInitializer
/system_ext/priv-app/GoogleServicesFramework
/system_ext/priv-app/SetupWizard
/system/system_ext/priv-app/GoogleFeedback
/system/system_ext/priv-app/GoogleOneTimeInitializer
/system/system_ext/priv-app/GoogleServicesFramework
/system/system_ext/priv-app/SetupWizard
"
I think /system/system_ext and /system_ext are hard linked, but not sure whether that matters. After loading that module and rebooting, the contents of those folders are still the same when checking with adb shell.
Any ideas?
For adb I'm using my desktop with Ubuntu 21.10.
Hello,
It's way easier than you can imagine. I did a tutorial there : https://forum.fairphone.com/t/tutorial-install-microg-on-fairphone-os/80016
But as you are quite advanced, the only thing you have to do is to install NanoDroid-MicroG with Magisk : https://downloads.nanolx.org/NanoDroid/Stable/
Just install the Zip and eventually update MicroG on the official website (version packed in NanoDroid is 17, newest one is 22...). This will erase all old Gapps.
PS :signature check spoofer don't work, the package you mentionned (which is the one I use also) only fake signature for Gapps, which is a good thing...
Thanks a ton! Looks like it worked, and it really wasn't more than installing that one module
Better use an ungoogled OS like LeOS-S. It's Android12L and works great an FP4
See https://leos-gsi.de
Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5EEA 13.0.3Global 13.0.1Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.
Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.
Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!
Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.
thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks
Can i update ota to 13.0.2 after rooted? Just update and root again?
Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2
How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?
thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.
vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img
kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet
Hi all, I break official camera app of my Oneplus 9 pro, i have 11_F.72 version, unlocked bootloader, magisk and i played a lot with debloater module and uad. I noticed that if i use a stock boot image everything works fine but when i flash a magisked boot image among the various apps that are uninstalled like gCalendar, Chat, Duo, Youtube, music ecc there is also the camera app.
I tried to restor it using pm install-existing but i failed (package not found).
If i reinstall it using apk package it crash on opening.
remove the debloater from magisk or just disable it, I had that issue before camera app disappears for no reason after disabling the debloater module it comes back.