I had installed custom rom directly from stock
Not it’s stuck on just a sec screen
Also it shows system ui is stopped and phone keeps stopping
Please help
Custom rom - resurrection remix 7.0.2
Fixed it by flashing pico gapps
Related
Hey there,
I recently tried to upgrade to Nougat 7.1 by flashing Lineage 14.1 (latest Nightly) or Resurrection Remix 5.8.0 / 5.9.2 via TWRP 3.1.0-2. But somehow I can't get the system to work.
At first I went from Fulmics 6.9 to Lineage. TWRP -> Factory Reset -> Flash ROM -> Flash GAPPS 7.1 Pico -> [1st attempt Reset Cache + Dalvik] / [2nd attempt: Factory Reset] -> Reboot. Same procedure for RR 5.8.
After flashing the boot animation appears for a while and then, finally, the screen turns black, then reboot. When the screen is black I can still push the power button and hear the wakeon sound. But the screen is still empty. At some point I managed to get to the first step of system configuration (language selection) just by waiting one or two minutes. But on the next step the screen tuns black again and eventually freezes. Sometimes I can even see the status bar and change the volume bars for example, but the installation process somehow cannot initialize properly. Most of the time the system just turns black, freezes and then reboots sooner or later. I tried different builds of RR (5.8.0 of 2016 and 2017 as well as the newer 5.8.2) and Lineage (13.0 / 14.1) but the issue is always the same.
On my first attemps - coming from Fumlics 6.9 - I even had problems with the modem. But after switching between 30B and 21C flashing ROMs (7.1 in particular) went mostly fine.
In the meantime I have even performed a full reset via LGUP / LG Flash Tool 2014 to D85521C_00_1204.kdz, Android 5.0 LP with Baseband 13.2-00002 (modem 21c). After rooting with Kingroot, applying TWRP with AutoRec and upgrading to the latest version (3.1.0-2) I tried the whole thing again.
Flashing Nougat RR / Lineage, Gapps, then Factory Reset and Reboot. The issue is still the same... blackscreen, freeze, reboot. Also flashing MR_Bump.zip after the Nougat / Gapps makes no difference. When applying the .zip via TWRP, the system suddenly shuts down and reboots, then the same Nougat bootloop as mentioned before.
Interestingly it isn't even possible to flash back to Fulmics 6.6 after trying a 7.1 Nougat version. When flashing the system just shuts down, then reboots. The ROM won't install. Other MM ROMs have problems after trying to flash Nougat, as well. For most of them I get the same bootloop / freeze phenomenon.
So the only chance is to completely reset back to LP 5.0 via LGUP / Flash Tool 2014 again...
I am not really sure what is going wrong with the system. But generally speaking LP and upgrading to MM and its variants appears to work fine.
Only trying to flash Nougat leads to perpetual bootloops with any ROMs.
Is there any chance to make Nougat run on my D855?
Anything else I could try to fix the issues mentioned above?
Would be grateful for any help!
Edit:
After installing another 6.0 Marshmallow yesterday I oncemore tried flashing two other Nougat ROMs. The first one was AICP, the second crDroid. When flashing in TWRP I noticed that there was a basband incompatibility again. The ROMs required the 21c, which was already installed (by the lastest MM 6.0) but still marked as unsupported. After that I tried flashing Step-hans 21c in the first place and finally got the two ROMs to install. However, after the unconditional flashing procedure I always got two lines of an "Unknown Command [log]" error...
AICP just gave me the black screen after the boot animation again, but suprisingly crDoid booted without any issue. At least I could make it run normally for one or two minutes. Entering the menus, pushing buttons, opening apps just worked fine for that short period. And then the screen finally faded to black again. I could still use the power button and see the display powering on and off. But the screen itself was still black. Maybe my device has problems with running Nougats system UI...?
Any idea? :'(
Did you wipe the system partition before flashing?
Thanks for the response.
Yes, I did
One month has passed and the issue unfortunately still persists.
I have tried to flash an older Lineage version (v13.0 with MM) the other day and realized that even that one had troubles with my phone.
The UI was very slow and finally crashed to a black screen. In some cases only (pices of) the top bar were visible after the UI crashed. So basically the same as with the newer Nougat builds. I also noticed that at some point the screen toggled between full brightness and a yellow mode with lower brightness (reading mode?).
Could those issues be realted to the kernel?
In some rare cases I can get the newer builds to run for maybe 3 or 4 minutes until the UI finally crashes / the screen turns black. I can then push the power button and hear the wake up effect, but the screen remains black. The nougat builds were also running very slow in those few minutes whilst maxing out the temperature of the cpu.
Any further ideas?
Would be glad for any advice!
Edit:
Stock LP and MM with 21C and 30B still work perfectly, and even very smooth.
But as soon as I try to upgrade to another MM such as Mokee or Lineage 13 or the newer Nougat builds, the screen turns black when setting up the device.
It looks like only Stock-based ROMs (Nimax MM or Fulmics MM) appear to work at the moment!
Hi there,
Resurrection Remix 5.7.4 (keeps looping by showing silver/red logo until battery is empty) won't start likewise twrp-3.1.1-0 (can see initial logo with version for a minute before it starts again) on my SM-T320. However, d/l modus works. Just downgraded to twrp-3.1.0-0. Worked fine.
twrp-3.1.0-0 won't start either.
Any ideas/solutions how to get my tablet running again?
Many thanks
Just used Odin to install CF-Auto-Root. Now I can enter the recovery mode again. Just did a wipe cache. Resurrection Remix 5.7.4 didn't come up again.
Factory reset worked!
Please guys I just successfully flashed CM 12.1 on my HTC Desire 620 it worked well at first but after i downloaded some apps from play store, my device just blacked out and started showing CM boot animation for several minutes, then it showed android is starting optimising apps after optimising, I thought the device will boot but it went back to the CM boot animation and that is how it has been doing. I have used TWRP to do a wipe now everything is normal but if I download or install an app the problem starts again. Please I need your help
Source of CM 12.1 download: http://forum.android.com.pl/topic/245169-rom-recovery-cyanogenmod-121/
Hello,
I am quite new to the community, did some flashing some time earlier on Xperia SP successfully but now I am struggling with Xperia Z1c (Amami) with new Pie releases.
I have been trying to flash my Z1C to Android 9, and all I can see is as those roms are working fine, but whatever I do, I end up with unusable phone.
When I tried clean flash (wipe Cache/Dalvik/System/data) and flash even the rom only (no gapps or any other module) I end up with a black screen after the splash screen is gone. When I flash also Gapps, I get the screen where I can pick the language and afterwards it says I shoudl wait a few moments and it literary goes forever, with 1 change that after 1-2 mins screen goes dark and from time to time it lights up with lockscreen or the screen to unlock SIM, but the touchscreen does not respond and also HW buttons are not working, shutting it down via vol up plus power.
I also tried to go dirty and use older oreo builds (Recovery Remix and AICP Roms) to go to Pie successors, but then I end up in a similar loop, where it says Android system is starting (this is when the touchscreen works) and then the screen goes dark and once it lights up, the touchscreen is not responding like in case of clean flash.
I am using TWRP 3.2.3 recovery plus AICP and RR roms. in both cases 8.1 roms work like a charm, but I am missing the security patches.
Is there anybody who could suggest if I am doing anything wrong, or just its my phone?
EDIT: happens the same on Lineage OS as well... quite desperate as I am not able to gather any info what could be going wrong
Thank you in advance.
https://forum.xda-developers.com/so...om-lineage-os-16-0-xperia-z1-compact-t3886233
Hi guys
I have the chinese version with global rom.
Successfully installed TWRP and crDroid 10.0 rom but the google first time setup kept freezing (everything else worked perfect) so I decided to reflash the rom.
When I reflashed the rom it keeps getting stuck on the crDroid boot screen, have left it overnight and same.
Tried reflashing vbmeta, firmware and then crDroid with various wipes but same result.
I would appreciate any advice.
Mubs