Paranoid Android Quartz 4/5 DEV - Xiaomi Redmi Note 8/8T - Redmi Note 8 ROMs, Kernels, Recoveries, & Other De

Paranoid Android Quartz 4/5 DEV - Xiaomi Redmi Note 8/8T - Redmi Note 8 ROMs, Kernels, Recoveries, & Other De

Screenshots: https://imgur.com/a/S4ckkqH
What works?
- RIL (Calls, SMS)
- Mobile data
- Bluetooth
- WiFi/hotspot
- VoLTE, VoWiFi, ViLTE
- GPS
- Fingerprint sensor
- Notification LED (on ginkgo)
- NFC (on willow)
- Screencast
- DRM/widevine
- Encryption
- Sound recorder
- Sensors
- Camera with 48MP support
- Aux cameras (ultrawide, macro, depth sensor)
- Camcorder with EIS and 4k 30fps support
- Ultrawide/macro video recording
- HDR+ with RAW10 in gcam
- Ambient display
- IR Blaster
- MiSound enhancer
- Offline charging
- "HWC Fixed"
- etc.
What's broken?
- You tell me!
Q: Is MiuiCamera included with this ROM?
A: Yes, MiuiCamera ported from Mi A3 is included and offers the same looks and functionality as the stock MIUI 11 camera.
Q: Are all aux cams working as good as stock MIUI?
A: Yes.
Q: Help! Getting huge idle drain and CPU doesn't enter deepsleep at all.
A: Disable pocket detection and ambient display.
Q: Does this ROM or kernel have KCAL support?
A: Yes, kernel has KCAL support which can be tuned using any kernel manager app such as FKM.
Q: Do I need to use RAW_SENSOR with HDR+ in google camera mods?
A: No, RAW10 HDR+ and HDR+ enhanced works perfectly out of the box.
Q: How's the performance and battery backup?
A: Try it out yourself and be amazed
Q: KCAL doesn't work? Nothing happens when I modify values.
KCAL works, you just need to toggle night mode twice for the changes to reflect. Recommended to use FKM.
Q: I'm getting real bad idle drain. Any suggestions?
A: You can try out a few things:
- Disable all ambient display features
- Disable pocket detection (important)
- Flash GMS doze magisk module
- Restrict battery for Google app
- Don't use google assistant
- Enable aggressive doze in Naptime app from playstore
- etc.
Q: ETA PL0X SUR
A: No ETAs, releases will be made in a monthly basis depending on changes made to the source.
Credits:
- All my loyal testers, a huge thanks!
- @mg712702 for initial device trees and contributions
- PA team for this awesome ROM!
- Anyone else I might've missed.
Cheers and #stayparanoid!

Adithya R said:
Screenshots: https://imgur.com/a/S4ckkqH
What works?
- RIL (Calls, SMS)
- Mobile data
- Bluetooth
- WiFi/hotspot
- VoLTE, VoWiFi, ViLTE
- GPS
- Fingerprint sensor
- Notification LED (on ginkgo)
- NFC (on willow)
- Screencast
- DRM/widevine
- Encryption
- Sound recorder
- Camera with 48MP support
- Aux cameras (ultrawide, macro, depth sensor)
- Camcorder with EIS and 4k 30fps support
- Ultrawide/macro video recording
- Ambient display
- MiSound enhancer
- etc.
What doesn't work?
- Lift to check
- NFC QS tile (on willow)
#stayparanoid
Click to expand...
Click to collapse
Please, add live display to calibrate color of the screen. Amazing!

No builds

Most awaited rom, finally. All thanks to aditya. Thanks man.

Builds are up now! Happy flashing
#stayparanoid

Finally! We need more Official ROMs

First bug free rom for Ginkgo...
Great work..
Enjoying Paranoid.. ?

download link not working.

Finally a 99% stable rom time to get rid of miui

Nice I flashed the rom and installed microG and works everything. Thank you for your great work Sir.

thanks for your great work !
no format data is needed AFTER flashed the zip ?
Sent from my Redmi Note 8T

radio fm works ?

TapaSte said:
thanks for your great work !
no format data is needed AFTER flashed the zip ?
Sent from my Redmi Note 8T
Click to expand...
Click to collapse
No, if you format data after flashing ROM, features will go missing in anxcamera. Always format data before flashing ROM. Formatting data isn't mandatory either, just wiping system, vendor, data, cache and dalvik would be enough.

Adithya R said:
Screenshots: https://imgur.com/a/S4ckkqH
Builds will be up in a few hours.
What works?
- RIL (Calls, SMS)
- Mobile data
- Bluetooth
- WiFi/hotspot
- VoLTE, VoWiFi, ViLTE
- GPS
- Fingerprint sensor
- Notification LED (on ginkgo)
- NFC (on willow)
- Screencast
- DRM/widevine
- Encryption
- Sound recorder
- Camera with 48MP support
- Aux cameras (ultrawide, macro, depth sensor)
- Camcorder with EIS and 4k 30fps support
- Ultrawide/macro video recording
- HDR+ with RAW10 in gcam
- Ambient display
- MiSound enhancer
- etc.
What doesn't work?
- Lift to check
- NFC QS tile (on willow)
- Offline charging
Q: Why's the ROM size 1.6GB? Is gapps included?
A: Yes, because of included gapps and anxcamera (nearly 200MB)
Q: Is ANXCamera included with this ROM?
A: Yes, ANXCamera v184 is included (thanks to aeonax), along with 48MP and portrait fix
Q: Are all aux cams working as good as stock MIUI?
A: Yes.
Q: 4k 30fps, video stabilization and few other options are missing in ANXCamera! What do I do?
A: Reflash ANXCamera 184 zip in magisk manager and reboot. DO NOT flash 48MPFix as it will break portrait mode.
Q: Help! Getting huge idle drain and CPU doesn't enter deepsleep at all.
A: Disable pocket detection and lift-to-check.
Q: Does this ROM or kernel have KCAL support?
A: Yes, kernel has KCAL support which can be tuned using any kernel manager app such as FKM. As a bonus, tianma panel users should have RGB set to 230 automatically in order to prevent retention.
Q: Do I need to use RAW_SENSOR with HDR+ in google camera mods?
A: No, RAW10 HDR+ and HDR+ enhanced works perfectly out of the box, so you can capture your precious astro shots in the night and not have purple tints in contrasted images
Q: How's the performance and battery backup?
A: Try it out yourself and be amazed
#stayparanoid
Click to expand...
Click to collapse
I have Image retention and I can't calibrate colors

Adithya R said:
No, if you format data after flashing ROM, features will go missing in anxcamera. Always format data before flashing ROM. Formatting data isn't mandatory either, just wiping system, vendor, data, cache and dalvik would be enough.
Click to expand...
Click to collapse
Hey dev ... Are you sure that it won't need clearing data ??? Just curious

Adithya R said:
No, if you format data after flashing ROM, features will go missing in anxcamera. Always format data before flashing ROM. Formatting data isn't mandatory either, just wiping system, vendor, data, cache and dalvik would be enough.
Click to expand...
Click to collapse
it's not mandatory also if I come from a custom miui based ROM ?
thanks.
Sent from my Redmi Note 8T

I am running an AOSP Android 10 custom rom. Is ok to "downgrade" to the latest stable firmware (MIUI 11) by flashing it in TWRP before installing PA? Or does MIUI have to be flashed in MiFlash?

i have an issue with the auto-brightness feature ! It doesn't seem to work correctly ! the brightness keeps one moving when the light is stil lthe same !

How does EIS work? Maybe I need switch it on somehow...

Related

[EOL][UNOFFICIAL] Paranoid Android 7.3.1 - AOSPA - OnePlus 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From official Paranoid Android team :
"We’re really excited to announce that we are releasing our Nougat flavour of Paranoid Android. We have a lot in store - with a mix of both features & improvements.
First & foremost, we have moved our code base to be fully CAF based. This brings many improvements to your device. The key improvement here is that Qualcomm hardware is better tuned on the CAF base and with our additional optimizations we can provide a smooth and fluid user experience that will let you enjoy using your device without any lags.
On first launch you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson who’s teamed up with us again and created several beautiful pieces of artwork. For those of you who don’t know, Hampus is a multi-disciplinary artist whose work stands itself and we’re glad to have him onboard. We have also added several new features and made improvements to the UI of the system that we believe would enhance the overall experience.
Pie
We’ve been working hard on redesigning this key feature of our portfolio and we’re really happy with how it has turned out. The whole design has been reworked and it fits in well with the overall feel of Google’s Material Design. This gives you the opportunity to use more gesture based control for navigating, rather than using the standard Navigation Bar at the bottom of your screen. Expect improvements and additions in the future.
Color Engine
We’re proud to announce our newest feature - Color Engine. Color Engine allows you to seamlessly change the colors of your device to be in Light, Dark (Pixel) and Black modes with a variety of accent colors to choose from. This makes changing the theme of your device really quick without having to install any extra packages on your device.
Pocket Lock
This feature prevents any form of accidental input when your device is in your pocket by disabling input sources. You can simply release Pocket Lock by long pressing the power button as highlighted by the minimal UI incase of any sort of obstruction or dust on the sensors.
Accidental Touch
Accidental Touch is a feature useful for many, especially the gamers out there. It prevents any sort of accidental touch on hardware buttons while the touchscreen is in use. This means you won’t experience any unexpected behaviour while playing games, web browsing or even when attempting to reach your finger out to the edge of that humongous display.
Major features:
- Reworked Pie
- Color engine
- Pocket lock
- Immersive mode
- Buttons customization (including navigation bar)
- On the spot controls (OTS)
Minor features:
- SafetyNet Compatibility
- Battery/Notification LED control
- Recent tasks locking
- Battery icon customization
- Google now page in default launcher
- Accidental touch
- Three finger swipe Screenshot
- Substratum (OMS) support (Color engine will be deactivated if you use Substratum)
- Quick pulldown
- Various performance and battery improvements
- Display Burn-in protection (for OLED screens)
- More to explore "
Device specific features for OP5 (List is being updated):
- Offscreen gestures
- sRGB support (OnePlus 3(T)/5 specific)
- Alert slider customization
Specific device performance and battery optimizations
- THP usage in kernel and memory allocator
- Specific boosting in performance critical scenarios
- Two-step input boost
Note: Custom kernels are explicitly unsupported and will cause issues
unless they state that they are AOSPA compatible or AOSPA based!
Download
Get my latest Oneplus 5 build here.
Changelog
2017-11-20 FINAL
PA 7.3.1 with open sourced ParanoidCamera app
Flash kernel updated to 4.4.99
2017-11-08 FINAL
Paranoid Android 7.3.1-EOL
Updated Flash Kernel - Linux 4.4.96
Definitive fix for USB-OTG - Even working for me with external HDDs
Arnova's v10.1 HDR+ Patched GoogleCamera - Gives stunning results. Use config :
Pixel 2XL
Nexus 6 no ZSL
Medium settings
2017-10-18
Patched KRACK Wi-Fi vulnerability
Updated Flash kernel - Linux 4.4.93
Hopefully fixed VOLTE broken in 2017-10-17 build
2017-10-17
October security patch
Small PA sources updates : translations updates and CAF updates
OOS 4.5.13 Blobs (no need to flash the corresponding firmware, still baked in)
Pixel 2 HDR+ Google Camera by B-S-G built-in
ParanoidCamera built in
Small camera change
Flash kernel updated to the latest one, toolchain updated to the latest components
Kernel Read-ahead value now defaults to 128 back from 512
Flashable zip now trims unused blocks while flashing. Don't remember to run some "fstrim -v /data" from time to time, on TWRP terminal, as this ROM has discard disabled on USERDATA.
2017-10-01
Updated to PA 7.3.0
2017-09-21
Two-Step input boost
THP usage in kernel and memory allocator
These two new features improve performance in specific scenarios.
Host build machine now uses Linux Kernel 4.13.3
Stock AOSPA launcher now lets change the dock color.
Stock AOSPA SMS/MMS icon changed
2017-09-17
Changes to BoostFramework values. Should improve responsiveness in some cases.
2017-09-14
Kernel build with Linaro GCC 7.x instead of stock Google TC
Flash kernel updated to 1.7, Linux 4.4.88
Added back wakelocks disable props in init.qcom.rc
2017-09-10
NFC Payements seems to be working just fine !
Removed firmware timestamp check. You won't be required to flash the corresponding OOS firmware with the ROM. It's all baked in. When a new OOS version will come up, I will update blobs and firmware inside the ROM, you won't have to do anything.
Few changes to ramdisk, from LineageOS sources
Changes to init
SnapdragonCamera is now branded ParanoidCamera. Nothing changes inside the ROM but now you know PA team has their own app instead of CAF one.
2017-09-08
New "Powered by AOSPA" splash screen, sweet ! fastboot flash LOGO logo.bin if you want to return to stock
Build now includes the needed firmware, like official Oneplus 3 builds. You dont have to bother with that !
High speed media profiles : you can now record 720p 60fps and 120fps and 1080p 60 fps, with normal speed, or slow mo using the Snapdragon Camera
Brightness steps from LineageOS
Flash kernel updated to the latest sources, 4.4.87
Provided a fix to let the user install the OOS Camera mod. I wont support it, dont report issues if you're using whatever mod like that.
2017-09-02
Updated to 4.5.10 blobs and sources. Flash 4.5.10 firmware and then flash PA build, as PA will refuse to flash if you don't use a 4.5.10+ firmware.
Some sepolicies fixes here and there, sysfs permission fixes
Media profiles from LineageOS
2017-09-01
Fixed front camera issue with third party apps
Switched kernel from Carbonite to Flash Kernel with PocketMode and patched gestures. Everything should work as before, tell me if you encounter stuff not working.
2017-08-29
Disabled WPA_SUPPLICANT log spam
Use VSYNC Offsets from OP3
Disabled SEEMP (Improves performance)
Use stock Dalvik/HWUI values
Build now checks for MODEM timestamp (Only installs on 4.5.8+ firmware)
Use LineageOS NXP-NFC source (Didnt fixed NFC payment for me, report plz)
Now kernel name is "paranoid"
2017-08-20
BoostFramework tunables added in overlays
Wifi and Bluetooth overlays added
PA version bump to 7.2.3 (just a number changes, features we're already here)
2017-08-19 :
Now user build instead of userdebug
Roundicon enabled by default
Camera lib now built from source
Maybe stuff I forgot
2017-08-17 :
Initial release on XDA
Bugs
- DCI-P3 Option not available in Settings
- Tell me
Instructions & requirements
Needs File Based Encryption to work. Works on decrypted too, using no-verity zip, thanks to @caki25 for pointing it
Needs ext4 formatted userdata. f2fs support is not there.
Important / Useful links
OpenGapps
Magisk official thread
Paranoid Android Community (G+)
My kernel sauce (OP5)
Mention (@) dekefake if you need some assistance and/or when reporting bugs. I dont think the PA team will be open to bug reports with this build, they might already work on a build for the OP5, but i'm not sure they will release anything anytime soon.
Cheers and #StayParanoid!
Contributors
@dekefake, The Flash, with his awsm kernel ! And of course, PA team TheCrazyLex, Thecrazyskull, arter97, xboxfanj, chrislahaye, carlosavignano, arzbhatia
Source Code: https://github.com/AOSPA
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.4
ROM Firmware Required: 4.5.13 firmware is baked into the rom
Based On: CAF
Version Information
Status: Stable
Current Stable Version: 7.3.0
Stable Release Date: 2017-08-17
Created 2017-08-17
Last Updated 2017-11-20

Precision about this build : its UNOFFICIAL .
I asked permission on Twitter, to arter97, thecrazylex and xboxfanj to make an unofficial thread on XDA, which has been ignored by the ones being active on Twitter (I know 2 of the 3 arnt active, but one of these guys is, and purely ignored me)
Thats why this thread is here, and I plan to update it
Édit : @TheCrazyLex answered to me, approved the creating of a XDA thread
EDIT 2 : One of PA members confirmed lack.of support for OP5 with PA Nougat, as support will begin with O. If you want pa_cheeseburger based on Nougat, install my builds ?
I won't ever include any mods to the ROM, like add blockers, Xposed, OOS Camera app, or whatever else. This ROM is and will stay the simplest possible, a simple Paranoid Android build for the OnePlus 5.
My phone starts to lag, why?
If you encounter slowdowns after weeks of using, please run these commands on a terminal app on your phone (assuming you're using Magisk)
su
/data/magisk/busybox fstrim -v /data
Phone should be as fast as the day you just clean flashed
if this command doesnt works, reboot into TWRP and run :
fstrim -v /data
If you guys want to build your own pa_cheeseburger builds, take a look to my instructions

Nice! Welcome and tks!

How about the camera? PA is known on the 3t for the excellent camera...
Sent from my OnePlus 5

fjsferreira said:
How about the camera? PA is known on the 3t for the excellent camera...
Click to expand...
Click to collapse
I use stock blobs. Camera is fine, like stock

fjsferreira said:
How about the camera? PA is known on the 3t for the excellent camera...
Click to expand...
Click to collapse
Yes what camera is included in this rom?

arch.anirudh said:
Yes what camera is included in this rom?
Click to expand...
Click to collapse
Snapdragon camera

@dekefake I did unofficial builds on XDA ages ago for PA and they didn't really care from memory.

daleski75 said:
@dekefake I did unofficial builds on XDA ages ago for PA and they didn't really care from memory.
Click to expand...
Click to collapse
I asked by respect, even for collaboration, but they ignore me, no problem

dekefake said:
I asked by respect, even for collaboration, but they ignore me, no problem
Click to expand...
Click to collapse
Is the XDA build the same one as yesterdays or newer?

delete

daleski75 said:
Is the XDA build the same one as yesterdays or newer?
Click to expand...
Click to collapse
The build I released on G+ 2h ago is the same as the XDA one

Cool dude thanks!! Any chance you will be adding the OOS camera?

Beukhof1 said:
Cool dude thanks!! Any chance you will be adding the OOS camera?
Click to expand...
Click to collapse
No, I won't add anything to the stock PA

Beukhof1 said:
Cool dude thanks!! Any chance you will be adding the OOS camera?
Click to expand...
Click to collapse
The camera with PA is pretty much identical to OOS for picture quality and for low light shots its better however 4k EIS is not as good as OOS.

Thanks and Welcome!
Can you create a Telegram Group for bug reports / beta test / discussion etc.?

Awesome! Flashed 1 hour ago and rocking solid
Enviado desde mi Oneplus 5 mediante Tapatalk

@dekefake NFC adb log cat for you if this helps to make NFC to work better.

Can this be used on decrypted?

Beukhof1 said:
Can this be used on decrypted?
Click to expand...
Click to collapse
Not tested on decrypted but may work.

[DISCONTINUED][ROM][11.0][STABLE] CAF Android 11 for RN8/8T [LA.UM.9.x][VANILLA/GAPPS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CAF Android 11.0 - LA.UM.9.x
for the Xiaomi Redmi Note 8/8T
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's CAF?
CAF stands for Code Aurora Forum. It's a fork of AOSP which is well optimized for Qualcomm Snapdragon platforms and has a higher degree of performance, battery life, and functionality compared to plain AOSP. In addition to the opensource CAF android base, these builds also use Qualcomm's proprietary Android 11 Board Support Package (BSP) for Snapdragon 665, to ensure maximum compatibility and functionality with Android 11. It can also be called an engineered ROM, as it's built from pure CAF sources and BSP in the same way OEMs do.
CAF system version: LA.QSSI.11.0.r1-07000-qssi.0
CAF vendor version: LA.UM.9.11.r1-02100-NICOBAR.0
Security patch: November 2020
Build status: Stable | Enforcing | User | release-keys
Features on top of pure CAF 11
Merged november security patch and AOSP 11.0_r15 tag
Theming support - accents, fonts, icon packs from pixel 5
Rounded icons and corners by default
Disabled unlock animations
Black as default dark theme
Blur tweaked and enabled by default
Improved scrolling responsiveness
Faster screenshot capture and dismissal
Mini panel for wifi and NFC
QS Panel rows/columns customisation
Auto 3x3 QS panel when media player is hidden
Bluetooth battery level on statusbar
Advanced reboot options
Tweaked statusbar icon paddings
Battery light toggle (ginkgo only)
Dedicated battery saver extended to kernel-level
Removed screen recorder audio restrictions
Double tap to sleep on lockscreen
Xiaomi Parts - dirac, clear speaker
Vulkan as default UI renderer
ART and bionic optimizations
Cleaned up useless CAF apps
Permissions hub
MicroG support
Misc fixes & stability improvements
GApps build features - all of the above, and:
Inbuilt gapps replacing AOSP/CAF apps
Pixel theme by default
Pixel sounds
Pixel dark bootanimation
Pixel launcher
Pixel theme picker
Pixel live wallpapers
Pixel screenshot editor (Markeup)
Enhanced battery stats (Turbo)
Lockscreen Smart Space
Introducing QuicksilveR kernel v2 rebased on CAF's latest android 11 kernel source and 4.14 linux stable merged in!!
What's working?
Boots
RIL (Calls, SMS)
Mobile data
Bluetooth
Bluetooth Audio
WiFi/hotspot
VoLTE, VoWiFi
Media (audio/video)
Cameras
Camcorder, EIS
GPS
Fingerprint sensor
Notification LED (on ginkgo)
NFC (on willow)
DRM/widevine
Sensors
IR Blaster
WiFi Display
Enforcing SELinux
Offline charging
FM Radio
SafetyNet
ADB
etc.
What's broken?
Encryption (decrypted by default)
You tell me!
How to install?
MANDATORY - be on latest android 10 firmware
Wipe system, vendor, cache
Format data
Flash ROM
Reboot
Enjoy CAF's Android 11 goodness on your ginkgo/willow!
How to upgrade from an older build?
Wipe system, vendor, cache, dalvik
Flash ROM
Flash MagiskR.zip (optional)
Reboot
How to get root? (optional)
After 1st boot, reboot to recovery, flash MagiskR.zip and reboot.
Downloads (vanilla/gapps)
ROM: https://www.androidfilehost.com/?w=files&flid=319085
Firmware: ginkgo | willow (android 10)
Screenshots
GApps - https://imgur.com/a/6pqCD8q
Vanilla - https://imgur.com/a/hQKIix9
NOTE: Make sure to read the FAQ in post #2 before asking questions. For reporting any bugs, describe the issue properly and make sure to accompany it with a logcat. Without a logcat, bugs cannot and will not be fixed.
Don't forget to hit the thanks button to show love and support my work.
XDA:DevDB Information
CAF, ROM for the Redmi Note 8
Contributors
Adithya R
Source Code: [url]https://github.com/caf-ginkgo/kernel_msm-4.14[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Android 10 firmware - MANDATORY
Version Information
Status: Stable
Created 2020-10-26

Changelog
Code:
caf-qssi_ginkgo-11.0-20201026
- Initial release
caf-qssi_ginkgo-11.0-20201104
- Merged november 2020 security patch
- Updated CAF system version to LA.QSSI.11.0.r1-07000-qssi.0
- Fixed reboots at bootanim
- Fixed broken sensors (eg. magnetometer)
- Added exfat sdcard support
- Improved notch cutout to be smooth like MIUI
- Improved UI performance
- Improved bootup speed
- Fixed issues with audio (crackling noise etc.)
- Fixed fingerprint access to external apps and in setup wizard
- Switched to stock thermal engine
- Updated device blobs from MIUI global stable
- Force HAL1 camera for some social media apps
- Improved memory management (scudo/lmkd)
- Fixed fingerprint sensor issues in FPC variants
- Added double tap to sleep on lockscreen
- Added permissions hub (privacy indicators)
- Removed emergency icon from lockscreen
- Other misc fixes and improvements
FAQs
Q: Is MiuiCamera included?
A: No, the MiuiCamera from android 10 doesn't work in 11, so a fresh port from Mi A3 is required whenever android 11 is released for it.
Q: What's the 4 or 5 number beside the wifi icon?
A: It's a CAF feature which shows the 802.11 generation number. 4 stands for 802.11n, 5 stands for AC, 6 for AX and so on.
Q: Does the main rear camera have yellow tint? This bug was there in AOSP 11.
A: No, it has been fixed.
Q: How to get weather in at a glance widget? It just shows me the date
A: There's a quite simple trick for this, just add another instance of at a glance widget manually onto another home screen. The one on the main home screen gets refreshed automatically!
Q: This ROM is laggy! Expected more since its CAF.
A: Most importantly, let the ROM settle after its booted, janks will eventually disappear. In my testing I've faced no lags at all except in the first 10 mins after booting. Do keep in mind that this is an initial A11 release, both from CAF and my side. The kernel used (QSv2) is also in its early stages as it's entirely rebased on android 11 kernel source.
Q: Next update when? ETA PL0X
A: Updates will be dropped as soon as CAF releases a new android 11 tag for our chipset (trinket) or when there's a new security patch available. Please do not spam XDA or telegram for ETAs.

Rom screenshots?

sunset_ms said:
Rom screenshots?
Click to expand...
Click to collapse
It's literally written in the 1st post, use your eyes.

Sir big fan. Thanks for the hard work bro

It's finally here!

stuck on google logo for like 5 Minutes. Is it normal?

pinkman420 said:
stuck on google logo for like 5 Minutes. Is it normal?
Click to expand...
Click to collapse
Have you updated the firmware?

Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work

Thanks for this! Works very good by just following your simple instructions!
I have a question: how can I enable bubble notifications / chats like you've done on the screenshots? Again, thanks a lot for bringing Android 11 to Redmi users!

ku0l

every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
edit: clean installed once again but flash dfe after install rom and magisk at next reboot
NO BOOTLOOPS and boot very fast, rom is smooth no lag and battery usage is better than caf q (reloaded)

nneko904 said:
every time i reboot, it's loops 4 times which gives me anxieties... i thought the loops only at first initialization but it stays whenever i tried rebooting, thankfully its always boot to system but the loops really smh, rebooting on this rom is quite an experience
i installed that magiskR, is this the cause?
Click to expand...
Click to collapse
Did u format data and update firmware? For me rom works good, without magisk btw.

nemanjsb said:
Did u format data and update firmware? For me rom works good, without magisk btw.
Click to expand...
Click to collapse
you can't boot without format data, so how do i? also i use stable firmware Q
rom works good for me too, just the problem is when i rebooting it loops albeit it go system everytime it still took long time

Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.

CheepPlüm said:
Are the Aux Cams are working? Incl.48MPX?
Thanks for the Hard Work
Click to expand...
Click to collapse
All the auxiliary cameras are working, use trcam to use them all at one place.
---------- Post added at 03:59 AM ---------- Previous post was at 03:54 AM ----------
DarkLey said:
Big fan of your work, thanks for another amazing ROM
Edit: I'm also having the reboot problems reported by @nneko904 (although they don't bother me). Also, File Transfer is not working when in system, only in recovery
Edit2: updated Magisk to v21 and Manager to 8.0.2 and seems like reboots are gone. Procedure is as follows:
- Install MagiskR.zip as described in initial post
- Boot to System, go into Magisk Manager
- Setings > Change Update Channel to "Beta"
- Update Magisk Manager via Magisk Manager's initial page
- Reboot
- Go into Magisk Manager and update Magisk. Don't use Recovery Mode, and choose Direct Install. Wait for it to finish and reboot.
Click to expand...
Click to collapse
To fix Redmi note 8 MTP not detected (caf Android11) This fix is for Windows users who doesn't see any MTP devices on their My Computer
1. Plug In your Device
2. Click Start and Search for Device Manager.
3. Search for Android Devices/ADB(Usually at the top of the devices)
4. Uninstall Any ADB drivers installed.
5. Re-insert your phone after uninstall
[Fix Credits - http://t.me/tokatsu ]

whyredFire said:
All the auxiliary cameras are working, use trcam to use them all at one place.
Click to expand...
Click to collapse
Where can I get trcam? Pls give link of working trcam.

Always on Display
How to turn off AOD on this rom? AOD draining so much battery on my device:crying:

Is there any ways to enable encryption?

hi, thanks for your works
my question, is signature spoof is supported?
---------- Post added at 05:20 AM ---------- Previous post was at 05:20 AM ----------
hi, thanks for your works
my question, is signature spoof is supported?

[DISCONTINUED][ROM][11.0] WaveOS v4.5 Rasmalai for Redmi Note 8/8T [OFFICIAL][UNIFIED]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WaveOS v4.x - Rasmalai
WaveOS is an android custom ROM based on AOSP, focused on delivering a perfect blend of aesthetics, functionality and performance out of the box. The version 4.X is based on Android 11. Various optimizations and enhancements have been merged from CAF and upstream AOSP to maximize performance and battery backup, and improve OS functionality. We provide a unique and beautiful user interface out-of-the-box that's inspired by OnePlus' OxygenOS, and can be tweaked to your liking. We've also added handy features and customizations that improves user experience and proves to be useful at the end of the day, rather than bloating the ROM with unwanted features and customizations that could cause stability issues. We hope you like it! #NeverBetter
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Head over to our full features list at GitHub
GApps included
Device-specific features
Miui Camera included
Ambient Display options
Mi Sound Enhancer
KCAL (display color calibration)
Clear Speaker
QuicksilveR kernel v2.5
What works?
Almost everything
What's broken?
You tell me!
ROM: https://sourceforge.net/projects/wave-os/files/rasmalai-4.x/ginkgo/
Magisk: https://github.com/topjohnwu/Magisk/releases
DFE (Encryption Disabler): https://bit.ly/2OLb6Mi
Firmware: Ginkgo | Willow
INSTRUCTIONS
Reboot to recovery
Wipe data, cache and dalvik if coming from another ROM
Flash ROM zip
Flash latest firmware
(optional) Flash DFE
(optional) Flash Magisk
Format data if encrypted
Reboot and voila!
Upgrading to a Newer Build
Reboot to recovery
Wipe cache and dalvik
Flash ROM
(optional) Flash DFE
(optional) Flash Magisk
Reboot and voila!
NOTE:
At least Android 10 firmware is mandatory
Ginkgo users are recommended to flash Android 11 (china beta) firmware
Screenshots in post #2
Follow us on Twitter | Telegram
ROM and device sources: https://github.com/Wave-Project/
Kernel source: https://github.com/ghostrider-reborn/android_kernel_xiaomi_ginkgo/tree/11.0
Cheers and #NeverBetter !

Screenshots

Does it support Sunlight mode?
Does it support Wifi Coverage Extend Option?
Does it support whitelisting apps from dark mode?
Does it support MIUI Camera with the same stock 48MP quality?
Does it support adjusting freeform windows despite the manifests?
Does it support skipping unlocking the device with a PIN after a reboot
Does it support invert-nav-bar (force close back button)?
Does it support Game Mode?
Does it kill apps in the background for just switching between them?
Does Mi sound work for wireless and wired headphones?
Does it support pop-up?
Does it show internal shared adopted storage on TWRP?
And does it have ADB over network/NTFS File format/Soft Reboot/Advanced Power Menu/Quick actions via pop-up notifications.
If it does all of these, I may pay the time and effort to change into your ROM despite that I need to resetup Magisk and Edxposed and System Settings.
Hard luck with development

Looks amazing. Looking for Vanilla version.

MichaelMay said:
This ROM does not support those that can't spend a second looking up what it supports and half of the things you are requesting like "game mode" is just nonsense and the other half is AOSP 11 which ALL 11 roms support.
One exception applies, it does use SLMK kernel LMK which is a horrid solution but still better than any other kernel LMK solution, I don't know why devs insist on this age old bull**** when LMKD gets weekly updates and works FAR better. It's this inclusion strategy of kernels by devs who don't understand anything about the Linux kernel that makes me wonder if I shouldn't just start over.
However, you either try it or you don't, no one gives a flying **** which you decide to do so go away and once you are away, stay away.
Click to expand...
Click to collapse
Nothing wrong with SultanXDA LMK..I had a OnePlus One with his amazing development on and his knowledge is second to none. Yes LMKD is more current, but is a lot more aggressive and kills processes that are needed. I do understand your frustration but I also know the work that Ad!thya does (he was also a developer of Bacon and was responsible for bring-ups on a device that everyone thought would never see life beyond Marshmallow).
I also agree with your statement here about asking daft questions, although some people aren't as well 'versed' with Custom ROM as I think you are.

Looks great! thanks for this man.

This is like miui and oxygen had a baby, its great for every day use. but the camera bug on some apps like telegram and messenger etc is bothering. i wish the next update will fix it

Adithya R said:
(...) DFE (Encryption Disabler) (...)
Click to expand...
Click to collapse
Hello @Adithya R . and everyone!
Thank you for your work.
I am about to flash your wave ROM. The linked (optional) dfe zip is "labelled' gingko...
Will it work for willow?
Thank you[/QUOTE]

mzcl-mn said:
Hello @Adithya R . and everyone!
Thank you for your work.
I am about to flash your wave ROM. The linked (optional) dfe zip is "labelled' gingko...
Will it work for willow?
Thank you
Click to expand...
Click to collapse
Obviously it will, it's a generic zip infact.

Does NFC work on willow with this rom?

Thanks for your work
A ROM that has what it takes

I found a bug, when recording the screen, the device's internal audio recording does not work

MichaelMay said:
No, LMKD does NOT kill any processes that are needed, that is the entire point of it, it's part of the android system instead of a hacked together kernel module that is supposed to be equal for all devices of every single ROM out there from all versions.
LMKD uses PSI to determine memory pressure and CANNOT kill needed processes or even relevant ones in the system, the "pinned" stuff is respected by LMKD but not by LMK or SLMK.
Oh and I forgot, the entire "android personalization services" thingy that they all include anyway is designed to use LMKD, if you don't, it won't work right and things will conflict. Most ROM devs don't get how this work yet either and most don't care either for some reason. that is WHY PE is my choice of supported ROM, becacause while they **** up all the time, at least it's AOSP and I can fix it before release.
I've been a kernel dev before either of them were even born.
Click to expand...
Click to collapse
What rom do you recommend for the redmi note 8?

Does this Rom have the functionality of being able to disable notifications for a set time? own the smart lock?

Strange problem with fonts here and Ukrainian language, most letters are ok with the default font, but some of them is Times New Roman for some reason

UPDATE - WaveOS v4.3 is here!
WaveOS_ginkgo-R-v4.3-20210420-1213-OFFICIAL
Download:
https://sourceforge.net/projects/wave-os/files/rasmalai-4.x/ginkgo/WaveOS_ginkgo-R-v4.3-20210420-1213-OFFICIAL-signed.zip
Source Changelog:
https://raw.githubusercontent.com/Wave-Project/stuff/main/changelog.txt
Device changelog:
- Upgraded most blobs to LA.UM.9.11.r1-03200-NICOBAR.0 (CAF)
- Updated stock blobs to MIUI 21.4.14
- Updated HALs to LA.UM.9.11.r1-03600-NICOBAR.0
- Fixed camera freeze in some social media apps
- Fixed camera lens switching delay
- KCAL improvements in xiaomi parts
- Added vibration strength control in xiaomi parts
- Added fingerprint shutter in MiuiCamera
- Made notch cutout wider/smoother
- Improved and fine tuned auto brightness algorithm
- Switched to new QTI thermal HAL
- Fixed screen blackouts under sunlight/heat
- Fixed random reboots in suspend and 4g usage
- Increased default media and voice volume steps
- Improved 5ghz wifi signal tolerance
- Fixed google play system updates
- Enabled and fixed sunlight visibility improvement (SVI)
- Reduced min cpu freq and boosting for battery improvement
- Disabled KPTI for performance improvement
- Reduced readahead to 128kB to improve storage performance
- GPS and wifi config optimizations and fixes
- Tuned cpusets and scheduler for better performance
- Improved rounded corners and fixed hide cutout option
- Reduced minimum screen brightness
- Switched to android userspace LMKD
- Added support for willow hwversion 18.31.0
- Improved zram read/write performance
- Switched to QuicksilveR v2.5 kernel
- Merged LA.UM.9.1.r1-09200-SMxxx0.0 CAF and v4.14.231 in kernel
- Misc optimizations and fixes
This build can be dirty flashed over previous build (with wipe cache and dalvik), but clean flash is recommended for a more stable experience.
Screenshots are in post #2.
Cheers and #NeverBetter!

sweet can anyone confirm that 5gh wifi works well?

christianoranaldo said:
sweet can anyone confirm that 5gh wifi works well?
Click to expand...
Click to collapse
According to one of my users, it does. In case it doesn't, you can flash android 10 firmware.

Thank you for your effort, smooth rom with great ui, only thing is I'm having slow charging issue (china variant). Hope you fix it, rather than changing kernel (have no choice) honestly, no custom kernel is at par with your QS. Cheers & Best regards!

@Adithya R sir, is it possible to add navigation button customization? like double tap and long press. it's really helpful for people with short fingers.

[ROM][13][OFFICIAL] PixelOS [AOSP][UNIFIED][09/05/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies. We aim to provide an experience similar to Google Pixel phones with numerous performance enhancements and a small amount of useful additional features.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Device Specific Issues:
• Slow charging on Chinese variants
• 48MP doesn't work in MIUI Camera
• You tell me.
Requirements
• Latest Global Stable Android 11 firmware for ginkgo and willow users
Downloads
Get the latest PixelOS Build for Xiaomi Redmi Note 8/8T
Thirteen: Download
Twelve: Download
Firmware https://xiaomifirmwareupdater.com/firmware/ginkgo/
https://xiaomifirmwareupdater.com/firmware/willow/
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
DFE (optional)(not recommended)(read encryption faq) https://github.com/PixelOS-Devices/...8/Disable_Dm-Verity_ForceEncrypt_20201008.zip
Note: GApps are included, don't flash separately.
Notes
• Based on OSS vendor
• Ships with QuicksilveR-v2.5 kernel
• MIUI Camera is included
• GApps are included
• Enforcing Build
• Encrypted Build
Flashing Instructions
Clean flash (coming from a different ROM):
• Flash recovery (links above)
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data (if encrypted)
• Wipe system, vendor, cache, dalvik, data
• Flash latest android 11 global stable firmware (link above)
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Wipe dalvik and cache (optional)
• Flash ROM zip and magisk (optional)
• Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://paypal.me/whyredfire
UPI: [email protected]
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_xiaomi_ginkgo
Contributor: DqrKn3Zz
ROM OS Version: Android 13/12.1.
ROM Kernel: Linux 4.14.x
Stable Release Date: 22 October 2021
Latest Release Date: 9 May 2023

Sccreenshots (both light and dark mode)
Karan's Channel
t.me
Updated for Android 12 (PixelOS 12.0)

Reserved

Cool AF

Does this ROM support fast charging and MIUI camera?

culec said:
Does this ROM support fast charging and MIUI camera?
Click to expand...
Click to collapse
Fast charging doesn't work in china models, although you can fix it by flashing A10 kernel for which you must be decrypted.
Yes it has micam.

Well, it's just a PE based ROM. I won't ask questions this time . Just tell me something makes me change into your ROM and voila!

whyredFire said:
Fast charging doesn't work in china models, although you can fix it by flashing A10 kernel for which you must be decrypted.
Yes it has micam.
Click to expand...
Click to collapse
Thanks for reply. Will you make it available in the next ROM version?

Thanks.

Thank you for the work, btw I have some questions: Is MIUI Camera included? Is the notification volume channel separated from the ring volume channel? I want my phone sounds louder whenever there is an incoming call but not when there are too many notifications come. I tried some 3rd' apps to fix it but when I adjust the notification volume, the ring's one is modified to the same level as the notification's too.

culec said:
Thanks for reply. Will you make it available in the next ROM version?
Click to expand...
Click to collapse
For that I'll have to release two variants of the same rom, one would be the regular one, and the other one with Android 10 kernel and decrypted build. That'll take me a lot of work.
I'll highly recommend you to flash Android 10 kernel with decrypted rom to fix it. Let me know if you want me to link a kernel.

mananhl said:
Thank you for the work, btw I have some questions: Is MIUI Camera included? Is the notification volume channel separated from the ring volume channel? I want my phone sounds louder whenever there is an incoming call but not when there are too many notifications come. I tried some 3rd' apps to fix it but when I adjust the notification volume, the ring's one is modified to the same level as the notification's too.View attachment 5234279
Click to expand...
Click to collapse
Yep, miui camera is included by default and everything is working in the same. But ring and notifications volume bar is merged

My phone-calls and stability is bad !!!
Why ?
When I call somebody, the phone offen crashes.

JonnyBoy1984 said:
My phone-calls and stability is bad !!!
Why ?
When I call somebody, the phone offen crashes.
Click to expand...
Click to collapse
Mostly its your local operator issue, its working fine here.
Try updating Dialer from the playstore for crashes.

This ROM is now certainly the fifth on my device (willow), but probably the last! I finally found it - a ROM that finally runs perfomant, smooth and so far without system crashes. This ROM is simply to recommend. Thanks a lot!
So far I haven't encountered any bugs - at least serious ones.

UntoastedToast said:
This ROM is now certainly the fifth on my device (willow), but probably the last! I finally found it - a ROM that finally runs perfomant, smooth and so far without system crashes. This ROM is simply to recommend. Thanks a lot!
So far I haven't encountered any bugs - at least serious ones.
Click to expand...
Click to collapse
Thanks a lot for your review. Next build is coming soon with a lot of fixes and improvements, hope you'll like it. I frequently share test builds on our telegram group https://t.me/pixelosginkgo

whyredFire said:
Thanks a lot for your review. Next build is coming soon with a lot of fixes and improvements, hope you'll like it. I frequently share test builds on our telegram group https://t.me/pixelosginkgo
Click to expand...
Click to collapse
I am glad to hear that. I am waiting for your new build.

I just tried PixelOS on my Willow (Note 8T), and I find it really good. There are just two bugs or limitations to fix:
1) Cannot use the Revolut banking app. Indeed, to connect, Revolut takes a selfie with the camera and does facial recognition. In practice, the selfie is taken well, but the application remains blocked on the photo made of me. I never had this problem with other ROMs. Of course, I tried to uninstall/reinstall the app.
2) Most of the other ROMs allow you to delete the free space under Gboard, which allows you to paste the space bar at the edge of the screen (Cf screenshot below). I haven't find how to do it with PixelOS.
Otherwise, for the rest, a system that seems stable and pleasant, thanks for your job

ManuD_Linux said:
I just tried PixelOS on my Willow (Note 8T), and I find it really good. There are just two bugs or limitations to fix:
1) Cannot use the Revolut banking app. Indeed, to connect, Revolut takes a selfie with the camera and does facial recognition. In practice, the selfie is taken well, but the application remains blocked on the photo made of me. I never had this problem with other ROMs. Of course, I tried to uninstall/reinstall the app.
2) Most of the other ROMs allow you to delete the free space under Gboard, which allows you to paste the space bar at the edge of the screen (Cf screenshot below). I haven't find how to do it with PixelOS.
View attachment 5241047
Otherwise, for the rest, a system that seems stable and pleasant, thanks for your job
Click to expand...
Click to collapse
The facial recognition thing should have been fixed.
This is a pixel based rom and doesnt pack extra customizations, you can surely flash magisk mods to get rid of that space. Although even the latest Pixels have it the same way.

Check 3rd post for download info and notes
Full Changelog
Device
- Added Blur toggle in dev settings
- Switched to qcom power hal and perf hal boosting
- Update redfin fp to March
- Wider and smoother notch cutout
- Updated stock blobs from MIUI 21.3.3
- Updated CAF blobs from LA.UM.9.11.r1-02800-NICOBAR.0
- Updated redfin fp to march (fixed safetynet)
- Fixed camera freeze in some social media apps
- Fixed camera lens switching delay
- Fixed voip/mic issues in some apps
- KCAL improvements in xiaomi parts
- Added vibration strength control in xiaomi parts
- Switched to new QTI thermal HAL
- Attempted to fix screen blackouts under sunlight/heat
- Disabled KPTI for performance improvement
- Reduced readahead to 128kB to improve storage performance
- GPS config optimizations and fixes
- Tuned cpusets for better performance
- Improved rounded corners and fixed hide cutout option
- Switched to android userspace LMKD
- Added support for willow hwversion 18.31.0
- Improved zram read/write performance
- Switched to QuicksilveR v2.5 kernel
- Merged LA.UM.9.1.r1-09100-SMxxx0.0 CAF and v4.14.223 in kernel
- Fast charging on chinese ginkgo variants maybe fixed
- Reduced minimum brighness
- Misc optimizations and fixes
Source
- OTA Updates
- March Security Patch
- Add blur in power menu
- Add Caffeine quick setting tile
- Add android S style media player in quicksettings and lockscreen
- Screenshot will follow system sound
- Added bt indicator for headsets
- Locked access to some QS tiles from lock screen without unlocking
- Changed Screenshot Tile chip colour to follow system
- Increased max password character limit to 64
- Added 2 button navigation gestures

Development [ROM][OFFICIAL] [OOS CAM] Pixel Extended ROM Android 13.0 [lemonadep] [08.05.23]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExtended ROM for OnePlus 9Pro [lemonadep]
What is this?
PixelExtended ROM (or PEX for short), is an Open Source Custom ROM based on PixelExperience, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features missing in Pixel Experience, The ROM will keep it's Pixel ideologies it's primary focus and wont stray into the dark and deep void that is bloat.
Based on Android 13.0 (T)
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
NFC
Sound/Vibration
Alert Slider
Known issues
Let me know
Features That are Available At the Moment
Click Here To See Features List
As only Essential Features will be added so this list will updated whenever there is a new feature
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Sourceforge Host
Donate
Liked my work? Give me a beer
Stay tuned
ROM Telegram Group
ROM Telegram Channel
Device Telegram Group

Android OS version: 13.0
Security patch level: May 2023
Build author/Device Maintainer: @ralf979
Source code: https://github.com/PixelExtended
Source kernel code: https://github.com/LineageOS/android_kernel_oneplus_sm8350
PixelExtended Developer: Aryan Gupta

Note:
* Gapps and OOS13 F21 firmware included.
* Flash guide in this post, after the changelog or in device changelog
Changelog:
Changelog:
07/05/2023 (V5.8 - A13.0)
Source:
- HERE
Device:
- HERE
OLD CHANGELOG
Spoiler: PEX 5.x Changelogs
20/04/2023 (V5.7 - A13.0)
Source:
- HERE
Device:
- HERE
29/03/2023 (V5.6 - A13.0)
Source:
- HERE
Device:
- HERE
19/02/2023
Device:
- Reworked all trees
- Updated Firmware to OOS 11.F.20
- OOS camera: Fixed Slow motion
- Update Kernel from Xtended
- Now vibration intensity is enabled and you can change
- Fixed Haptic Feedback
- Fixed Vibration
- Fixed dt2w
- Fixed QHD+
- ... and other small improvements
02/02/2023
Device:
- Totally rebased Device Tree
- Updated to A13 F18 firmware
- Updated to the latest LOS Kernel
26/10/2022
Device:
- Updated to October 2022 security patch (13.0.0 r7).
- Added OnePlus Settings.
- Added OnePlus ambient gestures.
- Added more vibration levels.
- Fix hyper touch and TP edge limit.
- Fixed LDAC audio.
- Added resolution changing settings (Only 9Pro) (Default 1080p).
- Added Warp Charging overlays and hopefully fixed fast charging.
- Fixed Live captions.
- Drop some unnecessary broken stuff.
- Some PEX patches and optimizations as usual.
- Plus some optimizations from LOS.
05/10/2022
Device:
- Initial A13.0 Release (Features will be added slowly).
- OOS11 style haptics and vibrations.
- Debloat for clean experience.
- Burn-in protection for statusbar and AOD.
Spoiler: PEX 4.x Changelogs
15/09/2022
Device:
- OOS12 C.63 base + firmware updated and included now with the ROM.
- Few Lineage fixes and optimizations.
- Misc. optimizations to improve overall performance of device.
12/08/2022
Device:
- OOS12 C.62 firmware included now with the ROM, no need to worry about firmware anymore.
- Fix Android Auto, Well being and Personal Safety apps.
- Fix warp charging and few stats on lockscreen.
- Fix auto brightness sensitivity, make it ramp a bit slower.
- Allow more apps to access aux camera.
- Enable toggle for HighTouchPolling rate.
- Increase size/radius of the fingerprint sensor.
- Lots of Lineage fixes and optimization.
- Misc. optimizations to improve overall performance of kernel.
08/07/2022
Device:
- Completely fixed vibrations and haptics all around.
- Fix speaker cracking.
- Fix mic in social media apps.
- Fix OnePlus charger detection.
- Enable refresh rate toggle.
- Drop DC-Dimming for now.
- Align statusbar correctly to the front cam.
- Lots of Lineage fixes and optimization.
- Misc optimizations to improve overall performance.
12/06/2022
Device:
- Initial lemonadep (9Pro) release based on OOS 12 vendor (c.48).
- Added OnePlus Settings (DC Dimming broken)
- Kernel built with latest AOSP Clang 14.0.7.
FLASH INSTRUCTIONS:
Before flashing any rom, make a backup of your data!
Pre-requisites : Brain and ability to READ !
NOTE:
IF YOU HAVE PROBLEMS WITH TOUCH OR SENSORS, FLASH THE F18 FIRMWARE
you can find it in the "lemonadep" folder in sourceforge
Clean Flash:
1. Download boot.img, dtbo.img and vendor_boot.img from "A13.0 Flash-utility" folder in SourceForge.
2. Reboot phone to bootloader.
3. fastboot flash boot boot.img
4. fastboot flash dtbo dtbo.img
5. fastboot flash vendor_boot vendor_boot.img
6. Reboot phone to recovery and FORMAT DATA.
7. ADB sideload PixelExtended_lemonadep-xxxxxxxxxxx.zip
8. Reboot system. Profit.
Dirty Flash :
1. Reboot phone to recovery.
2. ADB sideload PixelExtended_lemonadep-xxxxxxxxxxx.zip
3. Reboot system. Profit.
Rooting:
1. Download Magisk.zip
2. Reboot phone to recovery.
3. adb sideload Magisk_xxx.zip
4. Reboot system. Profit.

How come these OP's are not instructing to flash dtbo.img and vendor_boot.img?

I will keep an eye on this thread for a while and see what peoples reactions are such as battery longevity and whether i can use it as a daily driver.

Davies_90 said:
I will keep an eye on this thread for a while and see what peoples reactions are such as battery longevity and whether i can use it as a daily driver.
Click to expand...
Click to collapse
Or you could just flash the ROM and help the developers with your feedback. People have different usage patterns and battery life is subjective to each person. I thought this was already obvious to people, but it seems I was wrong.

ekin_strops said:
Or you could just flash the ROM and help the developers with your feedback. People have different usage patterns and battery life is subjective to each person. I thought this was already obvious to people, but it seems I was wrong.
Click to expand...
Click to collapse
I mean I could, subjective it may be its still something i look for.
Additionally i use a Bus ticket app that lets me transfer tickets once month, so want to be sure it'll work out the box prior to flashing.

The Sourceforge folder for lemonadep is empty 0

benhidalgo said:
How come these OP's are not instructing to flash dtbo.img and vendor_boot.img?
Click to expand...
Click to collapse
Fixed it, check now.

Shooter7889 said:
The Sourceforge folder for lemonadep is empty 0
Click to expand...
Click to collapse
My Sourceforge upload did not work, have updated a temporary Gdrive link, enjoy

Anyone know if this will work with verizon?

Does anyone have C.48 zip? Because I install C.47 and goes directly to C.60, doesn't give options for C.48. I tried Oxygen updater, but still given me C.60 for my model which IND model.

OOS Camera support?

[email protected] said:
OOS Camera support?
Click to expand...
Click to collapse
No

[email protected] said:
OOS Camera support?
Click to expand...
Click to collapse
OOS Camera for custom ROMs on OP9 series doesn't exist.

iam_delan0 said:
PixelExtended ROM for OnePlus 9Pro [lemonadep]
What is this?
PixelExtended ROM (or PEX for short), is an Open Source Custom ROM based on PixelExperience, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features missing in Pixel Experience, The ROM will keep it's Pixel ideologies it's primary focus and wont stray into the dark and deep void that is bloat.
Based on Android 12.1 (S)
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/Vibration
Alert Slider
Known issues
Let me know
Features That are Available At the Moment
Click Here To See Features List
As only Essential Features will be added so this list will updated whenever there is a new feature
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
DOWNLOAD - GDrive (Temporary)
Download from Sourceforge Host
Donate
Liked my work? Give me a Chai (Tea)
Stay tuned
ROM Telegram Group
ROM Telegram Channel
Device Telegram Group

Android OS version: 12.1
Security patch level: June 2022
Build author/Device Maintainer: @iam_delan0
Source code: https://github.com/PixelExtended
Source kernel code: https://github.com/LineageOS/android_kernel_oneplus_sm8350
PixelExtended Developer: Aryan Gupta
Click to expand...
Click to collapse
very nice, now I can use PE on my 6t and 9pro.

hi, nice work. can i enable VoLTE/VoWiFi on default nonsupported carries like old OxygenOS 11?

Roms running awesome. Any way to enable app grid settings from home settings? Edit: restarted my phone, and it popped up.

Hi there. Thanks for your hard work.
Will you be able to make build without gapps?

Has anyone used this with verizon

jaceypoo said:
Roms running awesome. Any way to enable app grid settings from home settings? Edit: restarted my phone, and it popped up.
Click to expand...
Click to collapse
How is the audio on the speaker and in audio recording on WhatsApp? I've already tested Lineage 19.1 and nameless based on oos12, and both are bugs in the audio.

Develop Bugs

welcome