I recently added some tweaks,but for some reason my phone connects to the wifi but it can't enter any website and I don't know which setting causes this.
ro.com.google.clientidbase=android-samsung
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
ro.kernel.android.checkjni=0
windowsmgr.max_events_per_sec=90
ro.HOME_APP_ADJ=1
video.accelerate.hw=1
persist.sys.use_dithering=1
pm.sleep_mode=1
debug.performance.tuning=1
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.jpeg.memcap=8000000
persist.sys.ui.hw=1
dalvik.vm.dexopt-flags=m=y
debug.egl.profiler=1
debug.egl.hw=1
persist.sys.ui.hw=1
debug.composition.type=gpu
hw3d.force=1
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
debug.egl.swapinterval=0
ro.min_pointer_dur=1
persist.android.strictmode=0
persist.cust.tel.eons=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.wmt.blcr.enable=0
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.ip.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp.moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp.rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.codec_priority_for_thumb=so
ro.sf.compbypass.enable=0
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
net.ipv4.tcp_wmem=4096 39000 187000
ro.ril.enable.amr.wideband=1
ro.telephony.call_ring.delay=0
Which one blocks me from accesing the internet?
*EDIT* after a restart the wifi doesn't even activate anymore.If i call *#*#526#*#* it says driver loading failed.
*EDIT* 2: after more restarts I can activate it but again I can't connect to nothing and If i call *#*#526#*#* it says unloading normal driver and loading mfg driver driver loading failed and after this I can't even see my router anymore
aveq8 said:
I recently added some tweaks,but for some reason my phone connects to the wifi but it can't enter any website and I don't know which setting causes this.
ro.com.google.clientidbase=android-samsung
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
ro.kernel.android.checkjni=0
windowsmgr.max_events_per_sec=90
ro.HOME_APP_ADJ=1
video.accelerate.hw=1
persist.sys.use_dithering=1
pm.sleep_mode=1
debug.performance.tuning=1
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.jpeg.memcap=8000000
persist.sys.ui.hw=1
dalvik.vm.dexopt-flags=m=y
debug.egl.profiler=1
debug.egl.hw=1
persist.sys.ui.hw=1
debug.composition.type=gpu
hw3d.force=1
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
debug.egl.swapinterval=0
ro.min_pointer_dur=1
persist.android.strictmode=0
persist.cust.tel.eons=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.wmt.blcr.enable=0
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.ip.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp.moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp.rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.codec_priority_for_thumb=so
ro.sf.compbypass.enable=0
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
net.ipv4.tcp_wmem=4096 39000 187000
ro.ril.enable.amr.wideband=1
ro.telephony.call_ring.delay=0
Which one blocks me from accesing the internet?
Click to expand...
Click to collapse
try to delete all net.ipv4 lines
pasandrei said:
try to delete all net.ipv4 lines
Click to expand...
Click to collapse
I deleted the lines + some other and after a few restarts it worked,but now my phone freezed so I had to remove the battery and restart again and now it doesn't work again
My phone is rooted and I recently changed a few settings in build.prop so I could write with a pencil, not sure if it worked but when I went back to delete it when I thought it didn't work that is the line I copy pasted then in the process I deleted the last lines of Additional Build Props in mistake, I want to put them back but I don't know what they are please help thanks, this is what I have now: ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.2_r3
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Although
I just tested with a pencil and change in sensitivity works, but still the lines are missing and I am a bit worried, can anybody copy paste who has rooted Samsung Galaxy S4 Mini ?
Here you are:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.I9195XXUCNE6
ro.build.version.incremental=I9195XXUCNE6
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri May 23 19:49:46 KST 2014
ro.build.date.utc=1400842186
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD5815
ro.build.tags=release-keys
ro.product.model=GT-I9195
ro.product.brand=samsung
ro.product.name=serranoltexx
ro.product.device=serranolte
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=serranolte
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=serranoltexx-user 4.4.2 KOT49H I9195XXUCNE6 release-keys
ro.build.fingerprint=samsung/serranoltexx/serranolte:4.4.2/KOT49H/I9195XXUCNE6:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=I9195XXUCNE6
ro.build.hidden_ver=I9195XXUCNE6
ro.build.changelist=1646188
ro.product_ship=true
ro.chipname=MSM8930AB
persist.sys.storage_preload=1
ro.build.knox.container=
# end build properties
#
# from device/samsung/serranolte/system.prop
#
#
# system.prop for surf
#
ro.sf.lcd_density=240
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=0
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
audio.offload.disable=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=162
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#system prop for KDHA tuning
ro.config.dha_cached_max=8
ro.config.dha_empty_max=42
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=1m
dalvik.vm.heapmaxfree=4m
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.knox=true
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.error.receiver.default=com.samsung.receiver.error
ro.setupwizard.mode=OPTIONAL
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=4.4.2_r2
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.knox=v30
ro.config.tima=1
ro.config.timaversion=2.0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.gps.agps_provider=1
Sent from my black pearl using Tapatalk
Awesome
Thanks mate exactly what I needed.
hi has any one got a untouched build prop file for H815 marshmallow please
Much thanks
Et voila
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MRA58K
ro.build.display.id=MRA58K
ro.build.version.incremental=152940055675e
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=MNC,REL
ro.build.version.release=6.0
ro.build.version.security_patch=2015-10-01
ro.build.version.base_os=
ro.build.date=Wed Oct 21 01:00:04 KST 2015
ro.build.date.utc=1445356804
ro.build.type=user
ro.build.user=jenkins
ro.build.host=LGEACI6R5
ro.build.tags=release-keys
ro.build.flavor=p1_global_com-user
ro.product.model=LG-H815
ro.product.brand=lge
ro.product.name=p1_global_com
ro.product.device=p1
ro.product.board=msm8992
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=LGE
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=msm8992
# ro.build.product is obsolete; use ro.product.device
ro.build.product=p1
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=p1_global_com-user 6.0 MRA58K 152940055675e release-keys
ro.build.fingerprint=lge/p1_global_com/p1:6.0/MRA58K/152940055675e:user/release-keys
ro.build.characteristics=default
ro.lge.lguiversion=4.2
# end build properties
#
# from device/qcom/msm8992/system.prop
#
#
# system.prop for plutonium
#
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in global mode
# TODO: Please DO NOT enable the next line when you merge CAF
#ro.telephony.default_network=10
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
persist.mdpcomp.4k2kSplit=1
//persist.mdpcomp_perfhint=50
debug.mdpcomp.logs=0
persist.metadata_dynfps.disable=true
persist.hwc.ptor.enable=true
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
# TODO: Please DO NOT enable the next line when you merge CAF
#ro.sf.lcd_density=560
ro.hdmi.enable=true
persist.speaker.prot.enable=false
#0 is default(30 min)
persist.spkr.cal.duration=0
qcom.hw.aac.encoder=true
#
# system props for the dpm module
#
persist.dpm.feature=3
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#3314291: Decimal sum after adding FLAC parser flag 131072
#37491 is decimal sum of supported codecs in AAL
#codecs: DivX DivXHD AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=3314291
# Enable AwesomePlayer stats
persist.debug.sf.statistics=1
# Print clip name being played
media.stagefright.log-uri=1
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
# Additional i/p buffer in case of encoder DCVS
vidc.enc.dcvs.extra-buff-count=2
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#LGE_DATA [email protected] change from true to false according to P1 LOS value.
#persist.data.netmgrd.qos.enable=true
persist.data.netmgrd.qos.enable=false
persist.data.mode=concurrent
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report major/minor versions as 3/0
# 196609 is decimal for 0x30001 to report major/minor versions as 3/1
ro.opengles.version=196609
# System property for cabl
ro.qualcomm.cabl=2
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1
#
# System props for bluetooth
# System prop to turn on hfp client
bluetooth.hfp.client=1
# Set Bluetooth transport
# initialization timeout
bluetooth.enable_timeout_ms=12000
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=rome
#BT_S: [CONBT-1247] Disable A4WP&WIPOWER
#system prop for A4WP profile support
ro.bluetooth.a4wp=false
#system prop for wipower support
ro.bluetooth.wipower=false
#BT_E: [CONBT-1247] Disable A4WP&WIPOWER
#Set this true as ROME on 8992 always comes with Wipower programmed
#and triggering embedded mode by deafult
persist.BT3_2.version=true
#Set this true as ROME which is programmed
#as embedded wipower mode by deafult
ro.bluetooth.emb_wp_mode=false
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
persist.audio.ssr.3mic=false
##fluencetype can be "fluence" or "fluencepro" or "none"
#move to model property setting
#ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = false
#enable gapless by default
#move to model property setting
#audio.offload.gapless.enabled=true
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#move to model property setting
#Enable offload audio video playback by default
#audio.offload.video=true
#move to model property setting
#Enable 16 bit PCM offload by default
#audio.offload.pcm.16bit.enable=true
#move to model property setting
#Enable multi offload by default
#audio.offload.multiple.enabled=false
#Enable 24 bit PCM offload by default
audio.offload.pcm.24bit.enable=true
#Enable music through deep buffer
audio.deep_buffer.media=true
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#property for vendor specific library
ro.vendor.at_library=libqti-at.so
#ro.vendor.gt_library=libqti-gt.so
sys.games.gt.prof=0
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
# enable navigation bar
qemu.hw.mainkeys=0
#move to model property setting
#enable voice path for PCM VoIP by default
#use.voice.path.for.pcm.voip=true
#selects CoreSight configuration to enable
persist.debug.coresight.config=stm-events
#[Net_Patch_0300][CALL_FRW][COMMON], 2012-05-25, Airplane Mode Pop-Up display property value
ro.airplane.phoneapp=1
# property for oom values
ro.sys.fw.bg_cached_ratio=0.33
ro.sys.fw.mOomAdj1=0
ro.sys.fw.mOomAdj2=1
ro.sys.fw.mOomAdj3=2
ro.sys.fw.mOomAdj4=3
ro.sys.fw.mOomAdj5=9
ro.sys.fw.mOomAdj6=15
ro.sys.fw.mOomMinFree1=73728
ro.sys.fw.mOomMinFree2=92160
ro.sys.fw.mOomMinFree3=110592
ro.sys.fw.mOomMinFree4=129024
ro.sys.fw.mOomMinFree5=225000
ro.sys.fw.mOomMinFree6=325000
#
# ADDITIONAL_BUILD_PROPERTIES
#
log.tag.GpsLocationProvider=DEBUG
log.tag.LocationManagerService=DEBUG
log.tag.NlpProxy=DEBUG
log.tag.LocSvc_java=DEBUG
log.tag.LgeGpsIndicator=DEBUG
ro.build.target_operator=GLOBAL
ro.build.target_country=COM
ro.telephony.default_network=9
ro.lge.lcd_default_brightness=145
telephony.lteOnCdmaDevice=0
ro.config.ringtone=01_Life_Is_Good.ogg
ro.config.notification_sound=Crystal.ogg
ro.config.alarm_alert=Melody_Alarm.ogg
ro.config.timer_alert=Timer.ogg
persist.service.bdroid.sap=true
service.bt.support.busytone=true
ro.dev.fmode=0
ro.brightness_config=1
ro.lge.revshare=2015
ro.lge.noise.suppression=1
ro.lge.ns.default=0
persist.lg.data.clearqos=1
ro.build.sbp=1
ro.lge.singleca.enable=1
ro.lge.custLanguageSet=true
persist.data.sbp.update=0
persist.sys.cust.lte_config=true
ro.sys.fw.bg_apps_limit=32
ro.config.max_starting_bg=16
lge.fm_gain_control_headset=0.95
lge.fm_gain_control_speaker=0.13
tangible_device_config=B1BCNAOTNA
ro.lge.vib_magnitude_index=0,1044,1276,1508,1740,1972,2088,2204
lge.normalizer.param=version2.0/false/13/true/8000/1/3000/0.5
ro.sdcrypto.syscall=398
ro.com.google.gmsversion=6.0_r1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=on
lge.nfc.vendor=nxp
drm.service.enabled=true
ro.lge.capp_emotional_led=true
wlan.lge.wifidisplay=both
ro.lge.capp_splitwindow=true
persist.splitwindow.support_all=false
ro.lge.qslide.max_window=2
ro.lge.capp_cupss.rootdir=/cust
ro.sf.lcd_density=640
persist.sys.strictmode.disable=true
ro.config.vibrate_type=1
persist.service.crash.enable=0
persist.sys.ssr.restart_level=ALL_ENABLE
persist.audio.fluence.voicecall=true
persist.audio.fluence.speaker=true
ro.lge.parallel.threads=3
ro.frp.pst=/dev/block/platform/soc.0/f9824900.sdhci/by-name/persistent
ro.lge.gons.enable=true
wlan.lge.gons.scan.completed=false
wlan.lge.gons.scan.scanonly=false
ro.lge.dzmode_control=false
ro.lge.adoptable_storage=false
persist.debug.sensors.hal=i
debug.qualcomm.sns.daemon=i
debug.qualcomm.sns.libsensor1=e
persist.sensors.mag_filter_size=8
persist.sensors.knock_delay=1000
persist.sensors.sre_low_thresh=15000
persist.sensors.sre_high_thresh=25000
persist.radio.apm_sim_not_pwdn=1
persist.audio.nsenabled=OFF
persist.audio.voice.clarity=off
persist.audio.handset_rx_type=DEFAULT
ro.qc.sdk.audio.fluencetype=nxp
ro.config.vc_call_vol_steps=7
ro.config.vc_call_vol_default=4
audio.offload.24bit.enable=1
audio.offload.pcm.enable=true
audio.spkr_prot_status=enabled
audio.spkr_prot_in_voicecall=enabled
persist.audio.dual_audio=ON
persist.audio.twin_headset=ENABLE
persist.audio.twin_headset_on=1
audio.offload.gapless.enabled=false
av.offload.enable=false
audio.offload.pcm.16bit.enable=false
use.voice.path.for.pcm.voip=false
audio.offload.passthrough=false
audio.offload.multiple.enabled=true
sys.knockon.knockoff.distance=10
ro.lge.lcd_auto_brightness_mode=false
ro.lge.audio_soundexception=true
sys.lge.bnrd=0
ro.lge.capp_ZDi_O=true
lge.zdi.actionsend=false
lge.zdi.onactivityresult=true
lge.zdi.dragdropintent=false
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
persist.service.kernel.enable=0
persist.service.packet.enable=0
persist.service.storage.low=0
persist.service.power.enable=0
persist.service.memory.enable=0
persist.service.ccaudit.enable=0
persist.lg.data.llkklk=true
persist.telephony.oosisdc=false
persist.lg.data.fd=-1
persist.qcril.disable_retry=true
persist.lg.data.llkklk.exact=true
ro.lge.swversion=H81520a
ro.lge.swversion_short=V20a
ro.lge.swversion_rev=0
ro.lge.factoryversion=LGH815AT-00-V20a-GLOBAL-COM-OCT-21-2015+0
dalvik.vm.heapgrowthlimit=256m
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.custom_ecc=1
persist.radio.sib16_support=1
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.25
dalvik.vm.heapminfree=4m
dalvik.vm.heapmaxfree=16m
lge.signed_image=true
ro.boot.svelte=1
ro.lge.pnconfig=true
wlan.chip.vendor=brcm
wifi.lge.patch=true
dhcp.dlna.using=false
wlan.lge.concurrency=MCC
wlan.lge.supportsimaka=yes
wifi.lge.fcc=true
wlan.lge.traffic.trigger=100
wlan.chip.version=bcm4339
wifi.lge.common_hotspot=true
wlan.lge.passpoint_setting=true
wlan.lge.dcf.enable=true
wlan.lge.softapwps=true
bluetooth.fm.restorecon=0
persist.sys.dalvik.vm.lib.2=libart
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
ro.expect.recovery_id=0x2eadf7ee9a8abf3a802d8bc7e03e5ba1f11c5ccc000000000000000000000000
Click to expand...
Click to collapse
mfck said:
Et voila
Click to expand...
Click to collapse
thanks ....but could you up load the file please
Thanks
I changed build.prob
The whole menu was Turkish , but had some sections Korean language and not fixed
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47D
ro.build.display.id=LMY47D
ro.build.version.incremental=152641229bbb0
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1
ro.build.date=Mon Sep 21 12:31:35 KST 2015
ro.build.date.utc=1442806295
ro.build.type=user
ro.build.user=jenkins
ro.build.host=LGEACI6R4
ro.build.tags=release-keys
ro.build.flavor=p1_lgu_kr-user
ro.product.model=LG-F500L
ro.product.brand=lge
ro.product.name=p1_lgu_kr
ro.product.device=p1
ro.product.board=msm8992
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=LGE
ro.product.locale.language=tr
ro.product.locale.region=TR
ro.wifi.channels=
ro.board.platform=msm8992
# ro.build.product is obsolete; use ro.product.device
ro.build.product=p1
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=p1_lgu_kr-user 5.1 LMY47D 152641229bbb0 release-keys
ro.build.fingerprint=lge/p1_lgu_kr/p1:5.1/LMY47D/152641229bbb0:user/release-keys
ro.build.characteristics=default
ro.lge.lguiversion=4.2
# end build properties
#
# from device/lge/alphap/qcom/device/msm8992/system.prop
#
#
# system.prop for plutonium
#
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# [email protected]
# Start in global mode
#ro.telephony.default_network=10
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
persist.mdpcomp.4k2kSplit=1
# BSP Perf
#persist.mdpcomp_perfhint=50
debug.mdpcomp.logs=0
persist.metadata_dynfps.disable=true
persist.hwc.ptor.enable=true
dalvik.vm.heapsize=560m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
persist.speaker.prot.enable=false
#0 is default(30 min)
persist.spkr.cal.duration=0
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#3314291: Decimal sum after adding FLAC parser flag 131072
#37491 is decimal sum of supported codecs in AAL
#codecs: DivX DivXHD AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
#mm.enable.qcom_parser=3183219
#codecs: FLAC Only for FLAC Offload [[email protected]]
mm.enable.qcom_parser=131072
# Enable AwesomePlayer stats
persist.debug.sf.statistics=1
# Print clip name being played
media.stagefright.log-uri=1
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
# Additional i/p buffer in case of encoder DCVS
vidc.enc.dcvs.extra-buff-count=2
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
persist.data.mode=concurrent
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report major/minor versions as 3/0
# 196609 is decimal for 0x30001 to report major/minor versions as 3/1
ro.opengles.version=196609
# System property for cabl
# disable cabl [email protected]
ro.qualcomm.cabl=0
# [email protected]
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1
#
# System props for bluetooth
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=rome
#BT_S: [CONBT-1247] Disable A4WP&WIPOWER
#system prop for A4WP profile support
ro.bluetooth.a4wp=false
#system prop for wipower support
ro.bluetooth.wipower=false
#BT_E: [CONBT-1247] Disable A4WP&WIPOWER
#Set this true as ROME on 8992 always comes with Wipower programmed
#and triggering embedded mode by deafult
persist.BT3_2.version=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
#ro.qc.sdk.audio.fluencetype move to model/audio_config.mk
#ro.qc.sdk.audio.fluencetype=none [email protected]
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# [email protected]
tunnel.audio.encode = false
#enable gapless by default
# [email protected]
audio.offload.gapless.enabled=yes
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
#LGE_CHANGED
av.offload.enable=false
#Disable 16 bit PCM offload by default
#LGE_CHANGED
audio.offload.pcm.16bit.enable=false
#Enable 24 bit PCM offload by default
audio.offload.pcm.24bit.enable=true
#[LGEMM][[email protected]] Remove min duration of offload playback(default value is 60sec).
#audio.offload.min.duration.secs=30
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#property for vendor specific library
ro.vendor.at_library=libqti-at.so
ro.vendor.gt_library=libqti-gt.so
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
# enable navigation bar
qemu.hw.mainkeys=0
#enable voice path for PCM VoIP by default
# BSP Audio
use.voice.path.for.pcm.voip=false
#selects CoreSight configuration to enable
persist.debug.coresight.config=stm-events
#System property for FM transmitter
ro.fm.transmitter=false
# [email protected]
audio.offload.passthrough=false
audio.offload.multiple.enabled=true
#property to display Airplane Mode Pop-Up [email protected]
ro.airplane.phoneapp=1
# property for oom values
ro.sys.fw.bg_cached_ratio=0.33
ro.sys.fw.mOomAdj1=0
ro.sys.fw.mOomAdj2=1
ro.sys.fw.mOomAdj3=2
ro.sys.fw.mOomAdj4=3
ro.sys.fw.mOomAdj5=9
ro.sys.fw.mOomAdj6=15
ro.sys.fw.mOomMinFree1=73728
ro.sys.fw.mOomMinFree2=92160
ro.sys.fw.mOomMinFree3=110592
ro.sys.fw.mOomMinFree4=129024
ro.sys.fw.mOomMinFree5=225000
ro.sys.fw.mOomMinFree6=325000
#property to xlog panic enable
debug.xlog.panic.enable=0
#property to xlog dump enable
debug.xlog.reg_dump.enable=0
#property to xlog default enable
debug.xlog.default.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
log.tag.GpsLocationProvider=DEBUG
log.tag.LocationManagerService=DEBUG
log.tag.NlpProxy=DEBUG
log.tag.LocSvc_java=DEBUG
log.tag.LgeGpsIndicator=DEBUG
ro.build.target_operator=TLS
ro.build.target_country=CA
ro.lge.swversion=F500L11d
ro.lge.swversion_short=V11d
ro.lge.swversion_rev=0
ro.lge.factoryversion=LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0
ro.telephony.default_network=9
ro.lge.lcd_default_brightness=145
telephony.lteOnCdmaDevice=0
persist.lg.data.usim_mobility=true
ro.config.ringtone=01_Life_Is_Good.ogg
ro.config.notification_sound=Crystal.ogg
ro.config.alarm_alert=Melody_Alarm.ogg
ro.config.timer_alert=Timer.ogg
ro.uplus.preinstalled_app=uwa,rms
ro.config.vc_call_vol_steps=9
ro.config.vc_call_vol_default=5
tangible_device_config=B1BCNAOTNA
ro.lge.vib_magnitude_index=0,1044,1276,1508,1740,1972,2088,2204
lge.normalizer.param=version2.0/false/13/true/8000/1/3000/0.5
ro.sdcrypto.syscall=398
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.gmsversion=5.1_r2
ro.com.google.clientidbase=android-om-lge
ro.com.google.clientidbase.ms=android-lgu-kr
ro.com.google.clientidbase.yt=android-om-lge
ro.com.google.clientidbase.am=android-lgu-kr
ro.com.google.clientidbase.gmm=android-om-lge
lge.nfc.vendor=nxp
wlan.lge.wifidisplay=both
ro.lge.capp_splitwindow=true
persist.splitwindow.support_all=true
ro.lge.capp_ZDi_O=true
lge.zdi.actionsend=false
lge.zdi.onactivityresult=true
lge.zdi.dragdropintent=false
ro.lge.qslide.max_window=2
ro.sf.lcd_density=640
persist.data.netmgrd.qos.enable=false
persist.sys.strictmode.disable=true
ro.opengles.version=196609
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
persist.audio.fluence.voicecall=true
persist.audio.fluence.speaker=true
ro.lge.gons.enable=true
wlan.lge.gons.scan.completed=false
wlan.lge.gons.scan.scanonly=false
persist.service.avrcp.browsing=1
ro.lge.parallel.threads=3
persist.audio.nsenabled=OFF
persist.audio.voice.clarity=off
persist.audio.handset_rx_type=DEFAULT
ro.qc.sdk.audio.fluencetype=nxp
audio.offload.24bit.enable=1
audio.offload.pcm.enable=true
audio.spkr_prot_status=enabled
audio.spkr_prot_in_voicecall=enabled
persist.audio.dual_audio=ON
persist.audio.twin_headset=ENABLE
persist.audio.twin_headset_on=1
persist.debug.sensors.hal=i
debug.qualcomm.sns.daemon=i
debug.qualcomm.sns.libsensor1=e
persist.sensors.mag_filter_size=8
ro.com.android.dataroaming=false
ro.afwdata.LGfeatureset=LGTBASE
ro.support_mpdn=true
net.tethering.noprovisioning=true
persist.lg.data.fd=-1
persist.qcril.disable_retry=true
ro.frp.pst=/dev/block/bootdevice/by-name/persistent
sys.knockon.knockoff.distance=10
ro.lge.lcd_auto_brightness_mode=false
ro.lge.audio_soundexception=true
sys.lge.bnrd=0
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
persist.service.kernel.enable=0
persist.service.packet.enable=0
persist.service.crash.enable=0
persist.service.power.enable=0
persist.service.memory.enable=0
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
ro.carrier=unknown
ro.lge.capp_emotional_led=true
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=560m
dalvik.vm.heaptargetutilization=0.25
dalvik.vm.heapminfree=4m
dalvik.vm.heapmaxfree=16m
lge.signed_image=true
ro.boot.svelte=1
persist.sys.ssr.restart_level=ALL_ENABLE
drm.service.enabled=true
ro.dev.fmode=0
ro.brightness_config=1
ro.lge.mptcp=1
wlan.chip.vendor=brcm
wifi.lge.patch=true
dhcp.dlna.using=false
wlan.lge.concurrency=MCC
wlan.lge.supportsimaka=yes
wifi.lge.fcc=true
wlan.lge.traffic.trigger=100
wlan.chip.version=bcm4339
wifi.lge.common_hotspot=true
wlan.lge.softap5g=true
wifi.lge.supportp2p5g=full
wlan.lge.lguaka=yes
wlan.lge.dcf.enable=true
wlan.lge.passpoint_setting=true
wlan.lge.softapwps=true
ro.config.vibrate_type=1
persist.dpm.feature=4
persist.dpm.nsrm.bkg.evt=16243
persist.sys.dpmd.nsrm=3
persist.dpm.loglevel=7825
ro.lge.sar.value=2
ro.sys.fw.bg_apps_limit=32
ro.config.max_starting_bg=128
ro.lge.revshare=2015
ro.lge.noise.suppression=1
ro.lge.ns.default=0
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.features=div
dalvik.vm.isa.arm.features=div
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
ro.pip.gated=0
Click to expand...
Click to collapse
May be those files name are in Korean.
editing build.prop H815 prop
# ro.build.flavor=p1_lgu_kr-user
ro.build.flavor=p1_global_com-user
-------
# ro.product.model=LG-F500L
ro.product.model=LG-H815
----------
# ro.product.name=p1_lgu_kr
ro.product.name=p1_global_com
---------
# ro.build.fingerprint=lge/p1_lgu_kr/p1:5.1/LMY47D/152641229bbb0:user/release-keys
ro.build.fingerprint=lge/p1_global_com/p1:5.1/LMY47D/151622113c084:user/release-keys
#ro.build.description=p1_lgu_kr-user 5.1 LMY47D 152641229bbb0 release-keys
ro.build.description=lge/p1_global_com/p1:5.1/LMY47D/151622113c084:user/release-keys
hard format pnone
Smartword correct
ringtones and alert tones are continuing problems
Here is my Build Prop Tweaks from Jumping from Various Android Phones
Which seem to be useful for all my phones
If it doesnt work for you please post or if I am missing something please let me know
Just sharing as it helps me, so trying to help others
Please try this at you own risk :fingers-crossed:
Just use Build Prop Editor from G'play (needs to be rooted)
Its how I do it
Copy and Paste the below under the Last line, Save it and reboot to take affect
ro.HOME_APP_ADJ = 1
debug.performance.tuning=1
ro.ril.power_collapse=1
ro.ril.disable.power.collapse=0
pm.sleep_mode=1
ro.config.hw_power_saving=true
persist.cust.tel.eons=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.vc_call_steps=20
ro.config.hw_power_saving=1
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
#GOOGLE DNS*
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.wcdma.dns1=8.8.8.8
net.wcdma.dns2=8.8.4.4
net.hspa.dns1=8.8.8.8
net.hspa.dns2=8.8.4.4
net.lte.dns1=8.8.8.8
net.lte.dns2=8.8.4.4
net.ltea.dns1=8.8.8.8
net.ltea.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
wifi.supplicant_scan_interval=300
# Net speed tweak
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.hspap=4096,87380,1220608,4096,1 6384,393216
net.tcp.buffersize.hsupa=4096,87380,704512,4096,16 384,262144
net.tcp.buffersize.evdo=4096,87380,563200,4096,163 84,262144
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
ro.lge.proximity.delay=0
mot.proximity.delay=25
ro.telephony.call_ring.delay=0
ring.delay=0
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.camcorder.videoModes=true
ime_vibration_pattern=0:60
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Video streaming optimization
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
media.stagefright.enable-rtsp=true
media.stagefright.enable-qcp=true
media.stagefright.enable-aac=true
# Camera Tweaks Supports Google Camera
persist.camera.HAL3.enabled=1
camera.HAL3.enabled=1
persist.camera.eis.enable=1
camera.eis.enable=1
persist.camera.is_mode=4
camera.is_mode=4
persist.camera.disable_zsl_mode=1
camera.disable_zsl_mode=1
persist.camera.gyro.android=4
camera.gyro.android=4
persist.camera.tof.direct=1
camera.tof.direct=1
persist.camera.tnr.preview=1
camera.tnr.preview=1
persist.camera.tnr.video=1
camera.tnr.video=1
ro.camera.notify_nfc=1
camera.notify_nfc=1
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
logcat.live=disable
# Auto Dimming Issues
persist.sys.cabc.enable=0
ro.service.cabc.supported=false
#scrolling speed
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
persist.sys.scrollingcache=3
debug.sf.hw=1
-----------------
These ones I have tried in other phones but *not this one*...... yet
Just Gaming
persist.sys.NV_FPSLIMIT=60 #or 90
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20 #or30
persist.sys.purgeable_assets=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
debug.sf.hw=1
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.performance.tuning=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Dalvik Virtual Machine Tweaks
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed
Click to expand...
Click to collapse
Once copied over, Save the modified script with build.prop editor and reboot
Enjoy
I will try this for few minutes.
I think many of these are outdated
nhmanas said:
I think many of these are outdated
Click to expand...
Click to collapse
some of them are, but still, this works great!
System update enabling
My device manufacturer locked System Update by
ro.miki_ui_remove_system_update=1
I made it to 0 and then the system update appeared on the settings
ro.miki_ui_remove_system_update=0
If you don't have this line in your build.prop , search for the word update
in the editor ,read the line , if it is to disable make it 0 else 1
I prefer QuickEdit app , requires root , but can directly open from root directory and edit and modify all kind of text files.
*UPDATED*
RahulR0047 said:
My device manufacturer locked System Update by
ro.miki_ui_remove_system_update=1
I made it to 0 and then the system update appeared on the settings
ro.miki_ui_remove_system_update=0
If you don't have this line in your build.prop , search for the word update
in the editor ,read the line , if it is to disable make it 0 else 1
I prefer QuickEdit app , requires root , but can directly open from root directory and edit and modify all kind of text files.
Click to expand...
Click to collapse
Thanks for that :good:
Thank you for the tutorial, it really helped me