Write Protection : Enable !!!!! - Galaxy S 4 Mini Q&A, Help & Troubleshooting

i d'ont try to upgrade my S4 Mini GT-I9192 because the write Protection is Enable , i Do with Odin but i have message Fail , please Help me
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> __Xmit Write fail
<ID:0/008> XmitData Fail..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/003> Added!!

Related

Galaxy S3 Odin FAIL! Help Please

I am getting this error when i try to root my stocked Galaxy S3 on android 4.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
anyone got an idea why its doing this and any solutions?
nay12x said:
I am getting this error when i try to root my stocked Galaxy S3 on android 4.3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
anyone got an idea why its doing this and any solutions?
Click to expand...
Click to collapse
its because you're looking for help in the wrong place http://forum.xda-developers.com/galaxy-s3-att/help

Problem - help.

Hi.
I try to instal official android system on my Note 2 by Odin.
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEMK9_N7100OXXEMK4_N7100XXUEMJ9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> tz.img
<ID:0/008> sboot.bin
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
<ID:0/007> Added!!
After that my phone stop working. It's stop loading at blinking SAMSUNG. Can someone help me?

help, no flash odin, i8160

Hello I can not flash the phone via ODIN. i8160
Tried many official firmware, single-file and multifile.
Tried to drop 2.3.6.
Phone does not boot on the logo (in recovery also comes)
Phone did not fall, just in the morning was not involved.
also tried this method http://forum.xda-developers.com/galaxy-ace/ace-2-help/galaxy-ace-2-recovery-mode-doesnt-t2788130
Please help.
Sorry for the English.
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> cache.img.md5
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Back to stock.

Try to go back to stock using Odin.
Odin FAIL!!!
Errors are as below:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJA_T999TMBDLJA_T999UVDLJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help. Thx...
Flash latest firmware

Help.. Please..

I have a SM-N7505 running on 4.4.2 firmware which I downloaded from sammobile (N7505XXUCNH1_N7505OJVCNH2_XSG).. The phone was working fine but there was some issues with the recovery meaning I could not flash anything, since the recovery screen didn't show up.. I ignored it till now. Today I saw a notification saying supersu binary needs to be updated and clicked on it and the phone rebooted to go to recovery i presume and it is not working anymore.. i take the battery out and start it and all i see is the bootscreen.. I put my phone in download mode and connected to odin to reflash the firmware but it fails.. here is the log from odin..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7505XXUANB1_N7505OJVANE2_N7505XXUANAC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7505XXUCNH1_N7505OJVCNH2_N7505XXUCNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Somebody plese help me to fix my phone.. Please please please...
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
SAME ISSUE HERE PLS HELP

Categories

Resources