Related
Do you know of a widget which will allow to set "silent mode" for just 10 minutes ?
I once had such widget but can't remember its name...
Thanks very much for anyone who can help
Try shush! ringer restorer in the market
Sent from my GT-I9100
Noam23 said:
I once had such widget but can't remember its name...
Thanks very much for anyone who can help
Click to expand...
Click to collapse
Just wondering, wouldnt it be easier to swipe down the Notifications pane and switch to Silent/Ring instead? i dont think there is a widget that does what you are asking.
Phone Silencer might satisfy your requirements. It's not a widget as such, but detects when you enter silent mode, and prompts you to specify how long you want the phone to be silent for. It's handy because you don't have to remember to disable silent after meetings or when you get up in the morning.
Just wondering, wouldnt it be easier to swipe down the Notifications pane and switch to Silent/Ring instead?
Click to expand...
Click to collapse
The thing is that I tend to forget doing that. I go inside a 90 minute lecture, and when the lecture is over, I sometimes forget to cancel silent mode, and continue with the day without hearing my phones alerts...
There is such a widget, I simply forgot it's name. When I pressed on the widget it showed me a list of times (5/10/20/30... minutes) so I would choose how long I want silent mode to go on.
Thank for the recommendations. Shush! and Phone silencer are good
Btw, does anyone know how to make the status bar toggle between Sound/Vibration/Silent. Currently I can do only Sound/Vibration or Sound/Silent...
Noam23 said:
The thing is that I tend to forget doing that. I go inside a 90 minute lecture, and when the lecture is over, I sometimes forget to cancel silent mode, and continue with the day without hearing my phones alerts...
There is such a widget, I simply forgot it's name. When I pressed on the widget it showed me a list of times (5/10/20/30... minutes) so I would choose how long I want silent mode to go on.
Click to expand...
Click to collapse
Try "Setting Profiles Lite". I use it mainly for time duration profiles especially silent during meetings... Among other things. The full version is too powerful for what I need it to do.
Can be a widget or in the notification bar.
You can create a widget in tasker to do exactly that - I have mine run for 15 mins but you can have it prompt for a value. I use it when I walk away from my desk at work and my phone is charging. When I get back, if I remember I click the widget again to put it back to normal, otherwise it resets itself in 15 mins..
Definitely not worth purchasing tasker for, but on the off chance that you already have it..
beautiful widgets
babandas said:
Try shush! ringer restorer in the market
Sent from my GT-I9100
Click to expand...
Click to collapse
Lovely app! Looks good and works well. Thanks.
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
TRLOS said:
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
Click to expand...
Click to collapse
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
HuStLaZ said:
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
Click to expand...
Click to collapse
Im not talking about turning off notifications all together.
I was talking about turning off the vibration for certain apps, but still having the notifications pushed to the Moto360 display.
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
kingcliff00 said:
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
Click to expand...
Click to collapse
Lol
Already found that setting.
Not what I was looking for. lol.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
I like this idea because sometimes it's hard getting the watch to light up with motion, so turning off that feature for when it does work would be fine.
In my case, I have the phone vibration turned off and rely on the watch to deliver notifications.
My one and only important feature request is the ability to create my own canned response list.
Of course, official support for 3rd party keyboards would be nice as well.
Bluetooth LE Peripheral Mode
I'm not sure if they intend to include Bluetooth LE Peripheral Mode in their Lollipop release. Google chose not to include peripheral mode for the Nexus 5 and Nexus 7, although it is included with the newer Nexus 6 and 9. But for Android Wear, Peripheral Mode would enable a huge number of new and useful apps, that would significantly improve the usefulness of the watch. The simplest one would be a beacon to help you find your watch when you forgot where you left it, but enabling service solicitation would open a whole new world of applications for the watch.
#1 has worked since day one.
I get a notification, my phone remains silent, the watch vibrates. It's in the AW app settings.
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
pratik_193 said:
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
Click to expand...
Click to collapse
Instead of swiping to answer the call, You can just swipe upwards to reject call with similar messages sent automatically
Sent from my SM-N910C using Tapatalk 2
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
apgrovas said:
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
Click to expand...
Click to collapse
Just select the days you would in alarm setup, do not check saturday and sunday
I am still wondering which watch support Bluetooth peripheral?
As I know LG G watch 5.0.1 do not support it.
if (mBluetoothAdapter.isMultipleAdvertisementSupported()) {
will return false.
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
Quoting myself because my wish came true!! Props to moto
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
aarons6 said:
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
Click to expand...
Click to collapse
Pretty sure vibration is app dependent. Example, 8sms. You can change the vibration length in the settings. If you set your phone to 1000ms vibration when you get a text your phone AND watch will vibrate for 1000ms(or whatever vibration pattern you set) To further my point I would NEVER feel the vibration of Snapchat updates because it was so short. I'm using xposed(gravity box) to change snapchats vibration length and I feel the notification on my watch and phone every time.
I agree 100% google should have a universal setting to be able to change vibration,notification, and screen light up settings.
anthonyg45157 said:
Quoting myself because my wish came true!! Props to moto
Click to expand...
Click to collapse
OK, so how do you turn off the auto-on option?
GuyInDogSuit said:
OK, so how do you turn off the auto-on option?
Click to expand...
Click to collapse
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
goa200 said:
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
Click to expand...
Click to collapse
I have.
Hey Everyone
Have another question here...is there any way to make the alarm clock on my LG G3 set off the vibrate on my SW3? Basically want it to vibrate as my phones alarm goes off to wake me up! Ha.
Thanks
sheppy1 said:
Hey Everyone
Have another question here...is there any way to make the alarm clock on my LG G3 set off the vibrate on my SW3? Basically want it to vibrate as my phones alarm goes off to wake me up! Ha.
Thanks
Click to expand...
Click to collapse
I use Sleep as Android and it'll do exactly what you're looking for - https://play.google.com/store/apps/details?id=com.urbandroid.sleep&hl=en
I've got mine set up to just buzz my watch first, then a failsafe that goes off on my watch and phone.
Ooooo looks brilliant!!! Do all the other features like sleep tracking etc drain the battery much then?
sheppy1 said:
Ooooo looks brilliant!!! Do all the other features like sleep tracking etc drain the battery much then?
Click to expand...
Click to collapse
It used to drain your battery totally, but dev recently got it working excellent instead.
Now our sw3 is one of the most battery efficient watch
To run the app on, battery "drains" around 17% over night, which is great since it various sensors are being used.
Regarding vibration on the watch in general: I think it's as easy as, if an app generates vibration alerts on your phone, it'll generate these on the watch too.
ivarson_swe said:
It used to drain your battery totally, but dev recently got it working excellent instead.
Now our sw3 is one of the most battery efficient watch
To run the app on, battery "drains" around 17% over night, which is great since it various sensors are being used.
Regarding vibration on the watch in general: I think it's as easy as, if an app generates vibration alerts on your phone, it'll generate these on the watch too.
Click to expand...
Click to collapse
Ooooo brilliant! Thanks for the info I'll give it a shot over the weekend then when I've had time to mess with all the settings, annoying though as I like using timely and would really just like it to vibrate my watch...
gabestover said:
I use Sleep as Android and it'll do exactly what you're looking for - https://play.google.com/store/apps/details?id=com.urbandroid.sleep&hl=en
I've got mine set up to just buzz my watch first, then a failsafe that goes off on my watch and phone.
Click to expand...
Click to collapse
I just got the SW3 yesterday. I'm trying to get my alarms to sync, found this an tried Sleep as Android. However, it seems no matter what settings I use, my watch only buzzes once very briefly for the alarm while it goes off as normal on my phone. As if just a notification that an alarm is going off. Is this just how it works? Any ideas?
I followed the "instruction" chapter on wearables to enable Smartwatch in the app and enabled the vibration (Smartwatch) from start option, but I can't find any other real set up options or instructions.
meh3884 said:
I just got the SW3 yesterday. I'm trying to get my alarms to sync, found this an tried Sleep as Android. However, it seems no matter what settings I use, my watch only buzzes once very briefly for the alarm while it goes off as normal on my phone. As if just a notification that an alarm is going off. Is this just how it works? Any ideas?
I followed the "instruction" chapter on wearables to enable Smartwatch in the app and enabled the vibration (Smartwatch) from start option, but I can't find any other real set up options or instructions.
Click to expand...
Click to collapse
I made two alarms - One with the phone vibrating / making noise, and the watch vibrating, then one set ~5 min before that, set to silent, and disabled vibration (so the phone does nothing), and set the Vibrate (Smartwatch) to "From start" as well.
When the first alarm goes off, mine buzzes once briefly at the time of the alarm, and then once again maybe 30 seconds later, then it starts getting more frequent after that. When I just went to check what my settings were, I also noticed there's an option to start the watch vibration "before" the alarm - though I'm not sure how much before the alarm "before" is, since it doesn't seem to be configurable, but that may alleviate my use of two alarms.
Hope that helps!
Official Clock app from Google
now u can install on any android and the alarm appear on smartwatch , to dismiss or postpone
Hey all, my ring doorbell app wakes the screen anytime I get an alert. I want to keep the notifications on but don't want the screen to wake. It wakes even in my pocket which I want to of course avoid. It may just be a bug in the app but I should be able to limit that from happening. Or so I hope anyway.
I have tried the following.
1. Switched all notifications pertaining to the app and individual cameras to "sound only"
2. In the app I have disabled "alerts open full screen video"
3. I have disabled heads up notifications globally through ADB.
4. Disabled ambient display.
5. Disabled notifications on lock screen.
I'm at a loss on what to do next. Any ideas are appreciated at this point.
TIA
ifly4vamerica said:
Hey all, my ring doorbell app wakes the screen anytime I get an alert. I want to keep the notifications on but don't want the screen to wake. It wakes even in my pocket which I want to of course avoid. It may just be a bug in the app but I should be able to limit that from happening. Or so I hope anyway.
I have tried the following.
1. Switched all notifications pertaining to the app and individual cameras to "sound only"
2. In the app I have disabled "alerts open full screen video"
3. I have disabled heads up notifications globally through ADB.
4. Disabled ambient display.
5. Disabled notifications on lock screen.
I'm at a loss on what to do next. Any ideas are appreciated at this point.
TIA
Click to expand...
Click to collapse
I've struggled with the same thing for months. It never used to do it, but after an update earlier this year it became the new normal for me.
I'm glad I'm not the only one. Hopefully somebody chimes in with some sort of work around.
I'm having the same problem with a Sony XZ1 phone (Android 8.0.0). I spoke with Ring at length and it's 'apparently' a problem with my phone, not their App.
I think that's a load of rubbish and something they need to address and fix. I installed the App on another Android phone running an earlier version of software, the App installs with different options and doesn't wake up the screen. So it's obviously dependent on the OS version but as other Apps don't have the same problem I can only conclude that it's an issue with the Ring App.
Has anyone tried uninstalling the app and then install an older version from APK mirror? Not even sure its on there but it's worth a go
hatdrc said:
Has anyone tried uninstalling the app and then install an older version from APK mirror? Not even sure its on there but it's worth a go
Click to expand...
Click to collapse
That's a great idea. There are plenty of versions to try on APK mirror, one or two per month from 2018. Not a good sign for a reliable and stable app.
I'll give it a go later unless anyone gets there first and can suggest a 'good' version to try
Were you able to find an older version that doesn't have the screen wake behavior?
edit: Pixel 2 - going back to 2.0.66.8 still has the screen wake behavior regardless of notification setting.
edit 2: 2.0.57.2 does the same thing...
Looks like the latest ring version finally let's you fix this. Select your devices, go to notification settings, then select sound only. The default is sound plus pop up. I no longer have the issue after making the change.
Can anyone confirm if turning off the 'plus pop' in the ring app settings works? I have a new pixel 3 on Android pie and the app is still turning on the screen at every alert event with settings set to just sound or just silent.
I'm having the same issue with the ring app. It wakes the screen. Really sucks when phone is in my pocket. I have tried every option and or combo of options. I have a pixel 3a on Android 10. Android 10 does have a option to wake screen for notifications found under display advanced, lock screen. But it is turned off
Still a problem on Android 10, No combinations of settings has been able to stop this for me. Of course Ring denies this even though I have sent a logcat to them.
Since our AOD notifications light comes only once and it's barely visible, I've decided to find some replacement for it...
I tried a few AOD apps from Play Store but the phone never goes in deep sleep with them,except for this one :good:
https://play.google.com/store/apps/details?id=com.newgen.edgelighting
It illuminates the edges of the screen when a notification appears, it's colorful, goes around the sreen,very visible...you can change its duration,thickness...there's a few more settings there but only in the premium version...
I think you'll like it,check it out
Here's a gif example...
I tried it but couldn't make it work, it doesn't light up the screen, what settings do i have to enable/disable to make it work? I have given all the required permissions.
---------------------------------
Nevermind, I managed to make it work. Thanks
enthu19 said:
I tried it but couldn't make it work, it doesn't light up the screen, what settings do i have to enable/disable to make it work? I have given all the required permissions.
---------------------------------
Nevermind, I managed to make it work. Thanks
Click to expand...
Click to collapse
How did you do it? Can't make it work either.
poronporonpompiero said:
How did you do it? Can't make it work either.
Click to expand...
Click to collapse
After you give all permissions through the app, go to settings/apps/permissions/other permissions,find True Edge and give the permissions again for Modify system settings and Show on lock screen...
Sent from my Xiaomi Mi 9T using XDA Labs
welder73 said:
Since our AOD notifications light comes only once and it's barely visible, I've decided to find some replacement for it...
I tried a few AOD apps from Play Store but the phone never goes in deep sleep with them,except for this one :good:
https://play.google.com/store/apps/details?id=com.newgen.edgelighting
It illuminates the edges of the screen when a notification appears, it's colorful, goes around the sreen,very visible...you can change its duration,thickness...there's a few more settings there but only in the premium version...
I think you'll like it,check it out
Here's a gif example...
Click to expand...
Click to collapse
thank you I just seek an application like this :good:
Turn on MIUI optimisation /Settings -> Additional settings -> Developer options - deep down below/ should be turned ON, active.
Otherwise True Edge doesn`t work - no matter of permissions given.
At least on Chinese stable rom - in the signature below.
Could someone make it work?
jfhernandez said:
Could someone make it work?
Click to expand...
Click to collapse
It's working all the time...
What is the problem? Did you gave the permissions again?
And remove it from the battery optimization...
welder73 said:
It's working all the time...
What is the problem? Did you gave the permissions again?
And remove it from the battery optimization...
Click to expand...
Click to collapse
i gave all permissions but it didn´t work.
Do you have the miui optimization on or off??
jfhernandez said:
i gave all permissions but it didn´t work.
Do you have the miui optimization on or off??
Click to expand...
Click to collapse
It's On...
You gave all permissions again?
It isn't enough when app ask for them, you must go to Settings/Apps/Permissions/Other permissions,find True Edge and check Modify Sytem settings and Show on lock screen...
And lock it on the recent apps and allow Autostart.
Also check Force Service in True Edge settings...
welder73 said:
It's On...
You gave all permissions again?
It isn't enough when app ask for them, you must go to Settings/Apps/Permissions/Other permissions,find True Edge and check Modify Sytem settings and Show on lock screen...
And lock it on the recent apps and allow Autostart.
Also check Force Service in True Edge settings...
Click to expand...
Click to collapse
thanks, now it works, i had not given the permissions again.
Hi,
I installed this, because the little led on front camera is just a joke.
The app works fine for all notifications that do not turn screen on, so it works well for email or message-app.
But if a notification turns the screen on, this app does not work, so I get no lighting from whatsapp or missed calls that both turn on the screen for a moment.
Does someone have any idea how to solve this. I tried to disable screen on in whatsapp but had no success. It still goes on every time a get a message there. I disabled popup-message in app-setting with no effect.
I am on xiaomi.eu rom miui 11.04.
donny02 said:
Hi,
I installed this, because the little led on front camera is just a joke.
The app works fine for all notifications that do not turn screen on, so it works well for email or message-app.
But if a notification turns the screen on, this app does not work, so I get no lighting from whatsapp or missed calls that both turn on the screen for a moment.
Does someone have any idea how to solve this. I tried to disable screen on in whatsapp but had no success. It still goes on every time a get a message there. I disabled popup-message in app-setting with no effect.
I am on xiaomi.eu rom miui 11.04.
Click to expand...
Click to collapse
I have had the same problem with Viber and I resolved it by turning off Light screen for messages in Viber settings...
I don't know about Whatsapp, I rarely use it...
welder73 said:
I have had the same problem with Viber and I resolved it by turning off Light screen for messages in Viber settings...
I don't know about Whatsapp, I rarely use it...
Click to expand...
Click to collapse
Unfortunately there is no option for this in WA. It has just an option for LED but this has no effect on display.
May there be a possibility to revoke some authorisation for this in Miui? I did not find one.
So do you get edge notification for missed calls or do you have the same problem than me there?
donny02 said:
Unfortunately there is no option for this in WA. It has just an option for LED but this has no effect on display.
May there be a possibility to revoke some authorisation for this in Miui? I did not find one.
So do you get edge notification for missed calls or do you have the same problem than me there?
Click to expand...
Click to collapse
Today's update of True Edge brings support for missed calls :good:
donny02 said:
Unfortunately there is no option for this in WA. It has just an option for LED but this has no effect on display.
May there be a possibility to revoke some authorisation for this in Miui? I did not find one.
So do you get edge notification for missed calls or do you have the same problem than me there?
Click to expand...
Click to collapse
Looking for that too. I stopped using this app just because of this.
welder73 said:
Today's update of True Edge brings support for missed calls :good:
Click to expand...
Click to collapse
This is unbeleaveable! It really works now for missed calls with latest update.
If there will be a solution for WA too, then it is a perfect app for me.
donny02 said:
This is unbeleaveable! It really works now for missed calls with latest update.
If there will be a solution for WA too, then it is a perfect app for me.
Click to expand...
Click to collapse
Sent the dev a message. With he solves that, I will probably buy pro version. It's the only thing that keep me away
I installed Miui 11.1 from xiaomi.eu today. With this version Always-On-Display got some improvements.
In fact I think I do not need any other notification app now.
In AOD I set a custom layout and used a black photo as background and set the switch to show notifications. So I get only an little line with time and date. Besides I set "light display when new notification arrives".
Now, when a message arrives the display switches on. I can see incoming message on lockscreen without touching the phone. Then the display switches off and AOD shows an icon from messaging app (see attached picture). This stays there until I unlock the phone.
This is perfect for me, I do not need any additional apps for this any more.
Only if phone is in a dark room, AOD switches off. That is not perfect because you do not see waiting messages then. But when you then lighten the room, AOD comes back. I can live with that.
donny02 said:
I installed Miui 11.1 from xiaomi.eu today. With this version Always-On-Display got some improvements.
In fact I think I do not need any other notification app now.
In AOD I set a custom layout and used a black photo as background and set the switch to show notifications. So I get only an little line with time and date. Besides I set "light display when new notification arrives".
Now, when a message arrives the display switches on. I can see incoming message on lockscreen without touching the phone. Then the display switches off and AOD shows an icon from messaging app (see attached picture). This stays there until I unlock the phone.
This is perfect for me, I do not need any additional apps for this any more.
Only if phone is in a dark room, AOD switches off. That is not perfect because you do not see waiting messages then. But when you then lighten the room, AOD comes back. I can live with that.
Click to expand...
Click to collapse
Is it possible to receive Viber notification on this updated Always-on-display?