HELP! my redmi note 5 is not detecting my sim card. im on the latest eu rom miui 12. it says that
CANT GET A VALID DEVICED ID.
:crying:
Flash global stable fastboot rom via mi flash tool and let me know if it works
Related
Recently I bought mi max 32/3GB in stable ROM.
I checked software, hardware, imei (imei1 &imei2 different number just like in the box) etc no problem.
So, I try to unblock bootloader but doesn't works out.
I flash to developer rom, try again and succeed, bootloader unlocked.
Flash TWRP, flash MIUI EU boot successfully, and i think I don't like MIUI ?
So, back to TWRP now flash AICP.
Now, hydrogen run smoothly,l. I checked imei imei1 and imei2 same number ?
Why they got same number?
What did I miss?
Any solution?
Hi,
I have a redmi note 5 AI/Global which I've had problems with - it's unable to get a signal with the sim card. It lost the imei numbers (and I'm assuming Baseband) with a TWRP restore where the user tried restoring the efs/modem partitions. The phone does pick up the network, but it doesn't show any reception. The sim card works fine in another phone.
I have:
1. flashed the baseband using the model's qcn using QPST
2. Changed the imei back to default using the imei change tool
It's currently on the latest dev rom. I'd really appreciate some help with it
try to search for qcn for the same model and restore it on your phone, it will work for sure
I've been looking for it, unfortunately I haven't been able to find it - it's M1803E7SG
because your modem file corrupt ,try this method may be can help you... i try this at other phone is work !!
https://www.theandroidsoul.com/fix-...d-wifibluetooth-issues-restoring-twrp-backup/
try last method fastboot erase modemst1 , modemst2 than use miflash flash again your firmware
Download the same fastboot Rom version and flash it via mi flasher, don't forget to choose flash all
qcn
Hello keljian, I want to know if you found the qcn for RN5 M1803E7SG, if so, please share it with me, thanks
Hello i have Global Device 6/128 GB unlocked.
i Successfull flashed xiaomi.eu_multi_MIMAX3_9.7.4_v10-9 Weekly and then i make full BACKUP with TWRP.
All just run fine.
Then i Updated via TWRP c...
Theni testet Ressurection Kernel 6.
After that i cannot use Fingerprint anymore.And cannot delet the Fingerprints that i learned with Phone.
Wiping Cache and Dalvik also didnt Help.
So i thoght its because the Kernel.
So i Dirty flashed again xiaomi.eu_multi_MIMAX3_9.8.1_v10-9 .
After tha the password of my phone didnt match.So i Make full WIPE of my Device "YES" in TWRP. FORMAT DATA.
Then i tryed to Restoere my Backup wich was make with TWRP.But it always Hangs on "SYSTEM Image" and FAILS.
So i tryed to make a new Install with xiaomi.eu_multi_MIMAX3_9.8.1_v10-9.
It boots and i can Use it but my IMEIs from SLOT1 and SLOT2 are "0" ...No imei.
Also it shows no Baseband and no Bluetooth Address.
MAc Adress is Present.
So i searched Internet that i have to restore the EFS Partition.
I done zthis but Imei is again not showing.
Is my Phone now bricked or is there a chance to get my imei back ?
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
mierlo420 said:
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
Click to expand...
Click to collapse
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
majo3000 said:
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
Click to expand...
Click to collapse
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
eliaztheone said:
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
Click to expand...
Click to collapse
this doesnt HELP.
I tryed it in TWRP
But again no EMEI Present after reboot =(
NEED QCN FIle.
After a long search i think i have to do this tutorial.But i need help !
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I need a ".qcn" Backup File from another MiMax3 and the "imei" wich belongs to that backup and Phone from another Person.
if have this i can search the "Imei" in backup File and can Add my "IMEI" wich is present on my Phonepacking.
If someone can help me that would be very wonderfull. But better help me on "PN" ....
Tryed really all things.... i think that would help.
Things i tryed : Flash Modem , Flash Firmware , MIflash (fllashall),flash Persist ....and so on.....
Hope someone can help me
Mismo problema
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
kacike69 said:
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Click to expand...
Click to collapse
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
majo3000 said:
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
Click to expand...
Click to collapse
I am in the same boat! exact same situation, did you manage to ever solve this?
Hello, I released the bootloader of my xaiomi my a2 lite to put this rom but when it was. Rooting something went wrong and crashed, so flahee the stock rom with the my flah tool. it worked fine all day but now it doesn't recognize the sim card. can you help me? I do not know what to do.regard
Hi, I got the Mi Mix 2 from ebay in really good condition. The phone was ment to replace my old Mi Mix 2, but it has a Vodafone firmware and won't update.
The phone ist stuck in an old rom:
Android-Version: 7.1.1 NMF26X
MIUI-Version: MIUI Global 9.2 | Stable - 9.2.12.0(NDEMIEK)
So I tried to unlock the bootloader, with no success. When I try to bind my mi-account it always says "Connect to the network and try again".
At this stage I've tried every advice from the internet (log in and out, mobile network vs. wifi, VPN ...) with no luck.
Now my questions: Is there a chance to flash an official firmware without unlocked bootloader? Has anyone managed to get rid of this annoying firmware?
Thanks in advance
Solution: open device -> connect it to pc with edl test point -> flash latest stable rom with Mi Flash Tool