My phone Redmi note 8 error The system has been destroyed
errors program miflashtool can not foud file flash_all.bat
krampusxxx said:
My phone Redmi note 8 error The system has been destroyed
errors program miflashtool can not foud file flash_all.bat
Click to expand...
Click to collapse
Did you extract your fastboot rom twice? you need to extract the fastboot rom[can be found here] twice to flash via mi flash.If that doesn't work follow this:
Assuming your bootloader is unlocked then boot device in fastboot mode and connect to PC. Make sure you have minimal ADB and fastboot installed in PC. Move vbmeta.img file from the fastboot file you have(it's inside the images folder) to the adb and fastboot folder. Then flash using this command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
if that does not work then type:
Code:
fastboot flash vbmeta vbmeta.img
after flashing vbmeta flash recovery.
However if your bootloader is not unlocked you need to visit service center.
Follow bellow steps (carefully) for flashing GSI in realme 3/3i on Android 10, we have only tested few GSIs Like CherishOS, LineageOS, HavocOS etc.
All GSIs have different methods to flash kn Realme 3/3i.
Provided method have tested on CherishOS (GSI Snaps are below)
What you need to flash GSI:
Platform tool (Bootloader should be unlock)
LineageOS 17.1.zip
https://bit.ly/oOo17o1rm1821Orangefox recovery.img
28.81 MB file on MEGA
bit.ly
Boot.img (do not try any other boot.img)
File on MEGA
bit.ly
Dmverity zip file
3.25 MB file on MEGA
bit.ly
GSI image (system.img)
We are flashing CherishOS this time.
https://bit.ly/CherishGSIrmx1821
Steps to Flash:
Copy LineageOS 17.1 and Dmverifyzip file into SD Card.
Flash orangefox
Commands:
fastboot flash recovery xxx.img (xxx is recovery name)
fastboot -w
fastboot reboot recovery
In OrangeFox Recovery
Goto format data and type yes
Now goto wipe, Wipe everything except SD Card and swipe
Now goto files>SD Card and flash LineageOS 17.1 zip file
After flashing done simply reboot to system (no need to wipe cache)
Your phone will boot in lineageos, in lineage OS 17.1 Goto Developer options and enable "Advance Restart" now press power button and click on reboot> recovery, your phone will reboot into recovery. Now goto files and flash Dmverityzip file and after flashing done goto reboot > bootloader (no need to wipe cache).
Once you rebooted into bootloader (fastboot mode) type below commands.
"fastboot --disable-verity --disable-verification flash boot boot.img"
(note this should be the same boot file which i have share in this thread)
"fastboot erase system"
"fastboot flash system xxx.img"
(xxx is cherishOS.img, wait for flashing completion)
"fastboot -w"
"fastboot erase para"
"fastboot reboot"
(Wait atleast 5-10 minites your phone will be in realme logo state, do not panic)
The End.
Special Thanks To Ujjwal for Flashing.
Feel Free to Join https://t.me/joinchat/WM3heLvnFTYXzeOb
azharmansoori said:
Follow bellow steps (carefully) for flashing GSI in realme 3/3i on Android 10, we have only tested few GSIs Like CherishOS, LineageOS, HavocOS etc.
All GSIs have different methods to flash kn Realme 3/3i.
Provided method have tested on CherishOS (GSI Snaps are below)
What you need to flash GSI:
Platform tool (Bootloader should be unlock)
LineageOS 17.1.zip
https://bit.ly/oOo17o1rm1821Orangefox recovery.img
28.81 MB file on MEGA
bit.ly
Boot.img (do not try any other boot.img)
File on MEGA
bit.ly
Dmverity zip file
3.25 MB file on MEGA
bit.ly
GSI image (system.img)
We are flashing CherishOS this time.
https://bit.ly/CherishGSIrmx1821
Steps to Flash:
Copy LineageOS 17.1 and Dmverifyzip file into SD Card.
Flash orangefox
Commands:
fastboot flash recovery xxx.img (xxx is recovery name)
fastboot -w
fastboot reboot recovery
In OrangeFox Recovery
Goto format data and type yes
Now goto wipe, Wipe everything except SD Card and swipe
Now goto files>SD Card and flash LineageOS 17.1 zip file
After flashing done simply reboot to system (no need to wipe cache)
Your phone will boot in lineageos, in lineage OS 17.1 Goto Developer options and enable "Advance Restart" now press power button and click on reboot> recovery, your phone will reboot into recovery. Now goto files and flash Dmverityzip file and after flashing done goto reboot > bootloader (no need to wipe cache).
Once you rebooted into bootloader (fastboot mode) type below commands.
"fastboot --disable-verity --disable-verification flash boot boot.img"
(note this should be the same boot file which i have share in this thread)
"fastboot erase system"
"fastboot flash system xxx.img"
(xxx is cherishOS.img, wait for flashing completion)
"fastboot -w"
"fastboot erase para"
"fastboot reboot"
(Wait atleast 5-10 minites your phone will be in realme logo state, do not panic)
The End.
Special Thanks To Ujjwal for Flashing.
Feel Free to Join https://t.me/joinchat/WM3heLvnFTYXzeOb
Click to expand...
Click to collapse
After booting to LineageOS 17.1, and flashing the DM verity disabler, Can i flash the unmodified Android 11 GSI system.img instead of CherishOS.img? Is it going to work?
ATDteam said:
After booting to LineageOS 17.1, and flashing the DM verity disabler, Can i flash the unmodified Android 11 GSI system.img instead of CherishOS.img? Is it going to work?
Click to expand...
Click to collapse
Yes, unmodified GSI will work. Just follow our process from "fastboot --disable-verity --disable-verification etc etc"
azharmansoori said:
Yes, unmodified GSI will work. Just follow our process from "fastboot --disable-verity --disable-verification etc etc"
Click to expand...
Click to collapse
Thank you i will do it when i recover my Realme 3 from being dead. i hard bricked my phone, No Fastboot, No Charge, No Recovery no sign of life in screen, can you suggest how can i fix this? or do you ever encounter this?
ATDteam said:
Thank you i will do it when i recover my Realme 3 from being dead. i hard bricked my phone, No Fastboot, No Charge, No Recovery no sign of life in screen, can you suggest how can i fix this? or do you ever encounter this?
Click to expand...
Click to collapse
There is only option to go to Service Center.
azharmansoori said:
There is only option to go to Service Center.
Click to expand...
Click to collapse
oh i see. however i manage to Extract the OFP firmware of realme 3 with auth_file, scatter file and all the img(s), the only problem is the Download-Agent File, there is a DA file thing error when flashing using SP Flash Tool. By the way thanks a lot.
ATDteam said:
oh i see. however i manage to Extract the OFP firmware of realme 3 with auth_file, scatter file and all the img(s), the only problem is the Download-Agent File, there is a DA file thing error when flashing using SP Flash Tool. By the way thanks a lot.
Click to expand...
Click to collapse
Please see other thread, which is in Guides of Realme 3 for (how to unbrick realme 3, do follow his process and like his post if you successfully unubrick).
azharmansoori said:
Please see other thread, which is in Guides of Realme 3 for (how to unbrick realme 3, do follow his process and like his post if you successfully unubrick).
Click to expand...
Click to collapse
yah i figure it out, im the one who posted the Unbrick Tutorial. Thanks.
ATDteam said:
yah i figure it out, im the one who posted the Unbrick Tutorial. Thanks.
Click to expand...
Click to collapse
Pleasure, would you please contact me at t.me/azharmansoori22 as i am facing issue in your bat file.
azharmansoori said:
Follow bellow steps (carefully) for flashing GSI in realme 3/3i on Android 10, we have only tested few GSIs Like CherishOS, LineageOS, HavocOS etc.
All GSIs have different methods to flash kn Realme 3/3i.
Provided method have tested on CherishOS (GSI Snaps are below)
What you need to flash GSI:
Platform tool (Bootloader should be unlock)
LineageOS 17.1.zip
https://bit.ly/oOo17o1rm1821Orangefox recovery.img
28.81 MB file on MEGA
bit.ly
Boot.img (do not try any other boot.img)
File on MEGA
bit.ly
Dmverity zip file
3.25 MB file on MEGA
bit.ly
GSI image (system.img)
We are flashing CherishOS this time.
https://bit.ly/CherishGSIrmx1821
Steps to Flash:
Copy LineageOS 17.1 and Dmverifyzip file into SD Card.
Flash orangefox
Commands:
fastboot flash recovery xxx.img (xxx is recovery name)
fastboot -w
fastboot reboot recovery
In OrangeFox Recovery
Goto format data and type yes
Now goto wipe, Wipe everything except SD Card and swipe
Now goto files>SD Card and flash LineageOS 17.1 zip file
After flashing done simply reboot to system (no need to wipe cache)
Your phone will boot in lineageos, in lineage OS 17.1 Goto Developer options and enable "Advance Restart" now press power button and click on reboot> recovery, your phone will reboot into recovery. Now goto files and flash Dmverityzip file and after flashing done goto reboot > bootloader (no need to wipe cache).
Once you rebooted into bootloader (fastboot mode) type below commands.
"fastboot --disable-verity --disable-verification flash boot boot.img"
(note this should be the same boot file which i have share in this thread)
"fastboot erase system"
"fastboot flash system xxx.img"
(xxx is cherishOS.img, wait for flashing completion)
"fastboot -w"
"fastboot erase para"
"fastboot reboot"
(Wait atleast 5-10 minites your phone will be in realme logo state, do not panic)
The End.
Special Thanks To Ujjwal for Flashing.
Feel Free to Join https://t.me/joinchat/WM3heLvnFTYXzeOb
Click to expand...
Click to collapse
azharmansoori said:
Follow bellow steps (carefully) for flashing GSI in realme 3/3i on Android 10, we have only tested few GSIs Like CherishOS, LineageOS, HavocOS etc.
All GSIs have different methods to flash kn Realme 3/3i.
Provided method have tested on CherishOS (GSI Snaps are below)
What you need to flash GSI:
Platform tool (Bootloader should be unlock)
LineageOS 17.1.zip
https://bit.ly/oOo17o1rm1821Orangefox recovery.img
28.81 MB file on MEGA
bit.ly
Boot.img (do not try any other boot.img)
File on MEGA
bit.ly
Dmverity zip file
3.25 MB file on MEGA
bit.ly
GSI image (system.img)
We are flashing CherishOS this time.
https://bit.ly/CherishGSIrmx1821
Steps to Flash:
Copy LineageOS 17.1 and Dmverifyzip file into SD Card.
Flash orangefox
Commands:
fastboot flash recovery xxx.img (xxx is recovery name)
fastboot -w
fastboot reboot recovery
In OrangeFox Recovery
Goto format data and type yes
Now goto wipe, Wipe everything except SD Card and swipe
Now goto files>SD Card and flash LineageOS 17.1 zip file
After flashing done simply reboot to system (no need to wipe cache)
Your phone will boot in lineageos, in lineage OS 17.1 Goto Developer options and enable "Advance Restart" now press power button and click on reboot> recovery, your phone will reboot into recovery. Now goto files and flash Dmverityzip file and after flashing done goto reboot > bootloader (no need to wipe cache).
Once you rebooted into bootloader (fastboot mode) type below commands.
"fastboot --disable-verity --disable-verification flash boot boot.img"
(note this should be the same boot file which i have share in this thread)
"fastboot erase system"
"fastboot flash system xxx.img"
(xxx is cherishOS.img, wait for flashing completion)
"fastboot -w"
"fastboot erase para"
"fastboot reboot"
(Wait atleast 5-10 minites your phone will be in realme logo state, do not panic)
The End.
Special Thanks To Ujjwal for Flashing.
Feel Free to Join https://t.me/joinchat/WM3heLvnFTYXzeOb
Click to expand...
Click to collapse
Can I do this on Lineage os 18.1 using its boot.img for fastboot -disable...., can flash any A11 gsi, and what about gapps, you, you haven't flashed any gapps.
ritukanta said:
Can I do this on Lineage os 18.1 using its boot.img for fastboot -disable...., can flash any A11 gsi, and what about gapps, you, you haven't flashed any gapps.
Click to expand...
Click to collapse
Yes you can flash LineageOS boot.img on Android 11 GSIs.
Amd what for custom rom users, I'm using a11 ppui, what changes will be added, and can I do it with only orfox??
RIVEEKS said:
Amd what for custom rom users, I'm using a11 ppui, what changes will be added, and can I do it with only orfox??
Click to expand...
Click to collapse
No you can do with other suppoted recoveries like SHRP, PBRP (Official) etc.
Trying to flash Lineage 17.1 or TWRP on Cubot Quest Lite ends in Orange-State-Bootloop
After flashing Lineage 17.1 i get a Bootloop at orange state.
Restoring original System and generating TWRP with the hovatek tool and flashing only TWRP produced also a bootloop
Tried [Hovatek]_Mediatek_Auto_TWRP_Recovery_Porter_V1.7a_by_Team_Hovatek.7z
Tried also [Hovatek]_Spreadtrum_(SPD)_Auto_TWRP_Recovery_Porter_V1.4_by_Team_Hovatek.7z
Flashing is done from Linux PC with following commands:
1. Try Lineage System without a Rocovery:
fastboot flashing unlock (volume key up for confirmation)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img <-- vbmeta.img from Cubot Stock rom
fastboot flash boot boot.img
fastboot flash system lineage-17.1-20210321-UNOFFICIAL-treble_arm64_avS.img
fastboot reboot
I tried also lineage-17.1-20210321-UNOFFICIAL-treble_a64_avS.img
2. Try Only TWRP Recovery with Stock Rom System unchanged
generate recovery with Hovatek Recovery Porter, then
restore original System with SP-Flash-Tool, then
fastboot flashing unlock (volume key up for confirmation)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot
Then try to enter Recovery by pressing Volume-UP+Power-Key
I was successfull with a Cubot Kingkong Mini with the same approach. Both phones from cubot have the same CPU, RAM, Camera
Mediatek MT6761 Helio A22, 64bit
Any ideas to get Lineage or TWRP running?
Hi, I have the same phone and find android 9 very painful.....do you think I can install android 6 ?
Hi andro-try, have you solved yet problem reported (TWRP) ?
Hey everybody.
So I've recently got this Redmi Note 8 (2021) and figured I'd root it.
After the week of waiting to unlock the bootloader, I did the next step to install Magisk.
Due to the lack of custom recovery, I patch the bootimage, and flash it with fastboot.
However after this, the phone is stuck on fastboot, so I guess something is missing.
I also tried the canary versions, but no success yet.
Did anybody succesfully instal Magisk on this phone? Or some other type of root?
I'll just answer my own question here.
Android 11 MIUI devices need enabled verification in boot.img AVBv2 signature​
This pull request will fix it (for me): https://github.com/topjohnwu/Magisk/pull/4975
Trying the vvb alpha worked for me.
You should flash first vbmeta.img with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Then flash the previously modified boot image with Magisk:
fastboot flash boot boot.img
pierzale said:
You should flash first vbmeta.img with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Then flash the previously modified boot image with Magisk:
fastboot flash boot boot.img
Click to expand...
Click to collapse
I heard about this vbmeta at several occasions, but I haven't found a proper resource or download location for it.
How do I create or download a patched vbmeta?
Other than that, the solution I posted does work for rooting my device. But I think flashing vbmeta might open some options up for me like a custom recovery.
pierzale said:
You should flash first vbmeta.img with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Then flash the previously modified boot image with Magisk:
fastboot flash boot boot.img
Click to expand...
Click to collapse
Hi.
when ich put that command i became that error:
C:\adb\fastboot.exe: unknown option -- disable-verity
sorry, i made a mistake. got it now
hello can you help me to root
Sure.
Install the newest magisk.
First unlock the bootloader, then patch a boot image with magisk, and flash it to your boot partition with fastboot.
hi guys,
i am t total noob so please be patient.
i like to install twrp from here but i stuck on the first step because of because of
Spoiler: this
To disable AVB via fastboot, grab the vbmeta image from the ROM you are on, and flash it with the following command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
can anyone help me to find the the vbmeta ( i am on MIUI Global 12.5.1.0).
Download your stock rom. You will find many websites in the internet. Download according to your miui version & device codename.
Then extract the zip file. Copy vbmeta.img to platform tools. Open cmd there and execute that command.
You could use an empty vbmeta.img directly from google (here), i used on my tablet not on the F3.