Hello,
I bought a Samsung Galaxy Watch SM-R815W and I did a factory reset on it and the reactivation lock is activated. I installed the combination file. I was able to do the command
sdb connect 192.168.xxx.xxx:26101
sdb root on
After this the same actions as the gear s3 don't work. Does anyone know what I have to do next to remove the reactivation lock? And how to do it without tripping knox.
Samsung Galaxy FRP problems
Hi I hope this may help ...the galaxy watch frp reset which you are attempting is based on overwriting a watch partition ...
The approach is to load the combination firmware .... Then to establish an SDB connection to the watch
Then to enable root on the connection
The next bit is to write a blank file the name of which will depend where you got the file from ....and to write this file to a patition on the watch
The partition number will depend on your watch model ....even people on web sites selling the frp unlock often get the partition number wrong
But writing two the wrong partition could trash BRICK your watch ....
The reason your frp resetcis not working is probably that you have the wrong partition number in your command the write the empty file
I do have a list of partition numbers and watch models which may help
But as you could trash your watch if I suggest the wrong one I am loathed to publish ... so for example the 805F has either 17 19 or 21 as the correct patition
Depends on the watch exact model
Here's the full scoop.
Yesterday I was running Tizen 4.0.0.7 and the reactivation lock was on
Then I downloaded the links from post #10 on this page https://forum.xda-developers.com/sm...alaxy-watch-46mm-lte-sm-r805u-canada-t4036257
Installed all 4 files AP, BL, CP, and CSC for the SM-R815W
Now I'm running Tizen 4.0.0.1 and the reactivation lock is still on
Then I downloaded the combination .zip file that was on that same post and ran that
Now I can run " sdb root on "
but cannot run " sdb push empty.bin /home/owner/media/Others/ "
Then I just skip the other steps and put in " sdb shell reboot download "
and now am doing more research
SDB push is failing !!!
OK so from what I understand you have succeeding in loading the combination firmware on the watch
And you have established an SDB connection to the watch OK
you need to tell me the next commands you are running after the sdb connect XXX.XXX.XXX.XXXPPP where theXXX is the IP address and the PPPP is the port number
You then get the connected message and a prompt
What are you typing next and what are the responces ???
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
have you copied empty.bin to the same directory which you are running SDB from ?
Alfiedog said:
OK so from what I understand you have succeeding in loading the combination firmware on the watch
And you have established an SDB connection to the watch OK
you need to tell me the next commands you are running after the sdb connect XXX.XXX.XXX.XXXPPP where theXXX is the IP address and the PPPP is the port number
You then get the connected message and a prompt
What are you typing next and what are the responces ???
---------- Post added at 07:05 PM ---------- Previous post was at 07:01 PM ----------
have you copied empty.bin to the same directory which you are running SDB from ?
Click to expand...
Click to collapse
That was exactly what I was doing wrong. I didn't have the empty.bin (BIN file) in the same folder that I was connecting to my watch with
Glad you got it sorted
Related
Hey Guys Let me start from the beginning: I got my tablet a year ago and about 5 months ago. (so its out of warranty) anyways about 8 months ago i had to send it in for a broken back camera. after a month they sent me back a new tablet and i was happy. after it came out of warranty i decided to go and root my tablet. that went fine with no problems. i wanted to see what else i could do with my tablet and i found unlocking it would open up the world of custom rom's. intrigued i looked it up and decided to unlock my tablet. after downloading the unlocker i tried to unlock it and it wouldn't unlock. after looking around at possible solutions i found out that my device had an unknown serial number. I tried using ratchet to fix it but it kept giving me the error of "device not found". when type adb devices it shows up there as connected but when i try to push the file its not. ive read it might be caused because my system directory dosen't have write permissions. any help would be greatly appreciated.
Asus transformer Prime
Android 4.1.1
kernel:3.1.10-00004-gc770ddc
Build:JRO03C.US_epad-10.4.2.17-20121018
ADB
Have you added your VID to your adb_usb.ini? This should be in the %HOME%\..android directory. My example:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x071b
0x0e79
0x18d1
0x2207
Note, ignore the first line. I.E. for VID_18D1, I added 0x18d1.
bnborg said:
Have you added your VID to your adb_usb.ini? This should be in the %HOME%\..android directory. My example:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x071b
0x0e79
0x18d1
0x2207
Note, ignore the first line. I.E. for VID_18D1, I added 0x18d1.
Click to expand...
Click to collapse
could you please explain step-by-step on how to do that im a novice at this stuff and i dont know what im doing.
Hello. Today 04.08.2015 19:54 I found solution to back to live your SW2.
Your SW2 must have access to DFU MODE!!! IMPORTANT!!!
I make by this.
1. Make sure you have dfu util 0.7 or 0.8
2. Download from this tread SmartWatch.dfu <----- this is firmware for Smartwatch 1 (MN2)
3.Copy this firmware to this same folder were you have dfu util.
4. Run Dfu Util.
5. Write dfu-util -D SmartWatch.dfu and Enter.
6. After few minutes your SW2 been flashed and bam its black screen but dont worry.
7. Now when you plug by USB your SW2 to computer you hear the sound DFU
8. Now we make again this same like in number 5 write now dfu-util -a 0 -D sw2.dfu -s 0x08000000 and enter
9. Again after few minutes you see flashing has been finished.
10. Now you can unplug the sw2 from usb and try turn on
11. BAM OH MY GOD ITS WORK
12. Pair with you phone by bluetooth
13. Automaticlly your phone update your watch to newest version.
All files I attach here
And sorry for my bad english. But this solution work for me hopfully working for you guys
All in one https://drive.google.com/file/d/0B4HP2CvqUYPkMF9BM3l0MDQ1WG8/view?usp=sharing
Please tell me if it work for you on this tread
can we flash hexedited dfus with this trick?
How can I re dump latest fw from my smartwatch 2 with dfuils?
Ad.1 I think yes, couse everythink what do you wanna make with fw or hexedited fw you can only flash this "sector" 0x08000000 try I think you can't lose nothing couse if you Brick your device simply by my solution you can back to normal.
Ad.2 Yes you can simply take latest fw from your watch using dfu-util -u -s 0x08000000
After this you have internal fw from watch on blank file then you must change from blank to dfu. Try find on this forum how to change files "name" or go to section sw2 and there is tread about hacking smartwatch.
Im only create solution for people who get "black dead watch" and how to bring back device to life I dont want hacking/mixing on firmware for me sony firmware its ok but who know maby after few months I try to make custom roms
Sidoreczek said:
Ad.1 I think yes, couse everythink what do you wanna make with fw or hexedited fw you can only flash this "sector" 0x08000000 try I think you can't lose nothing couse if you Brick your device simply by my solution you can back to normal.
Ad.2 Yes you can simply take latest fw from your watch using dfu-util -u -s 0x08000000
After this you have internal fw from watch on blank file then you must change from blank to dfu. Try find on this forum how to change files "name" or go to section sw2 and there is tread about hacking smartwatch.
Im only create solution for people who get "black dead watch" and how to bring back device to life I dont want hacking/mixing on firmware for me sony firmware its ok but who know maby after few months I try to make custom roms
Click to expand...
Click to collapse
ok, can we use dfutils on windows?
Windows
Yes! ? im using windows 8.1 and I dont have problem with flashed device in my google drive You have dfutil for windows and two dfu roms ? yesterday im flashing my friend smartwatch 2 on windows 10 and this same I dont have problem with flashing. So windows 7,8.1 and 10 is compatibility with dfu utils
problem with dfu mode
i can't enter in dfu mode with sony sw2, how do enter in dfu mode?
i need help please
hello teþekkurler of such a subject if you have made God's sake help but halfway up the picture or vidol of us yapalim this thing will be to yaziyl not please me watch2 visual flash fs
---------- Post added at 07:02 PM ---------- Previous post was at 06:15 PM ----------
please answer a picture or video bi-up
Thanks for the info. I just unbricked my friend's SW2 that I had more than 6 months in my drawer. I used http://underverk.blushingboy.org/smartwatch-ide-002-alpha-windows.zip from this link (https://github.com/underverk/SmartWatch/wiki/Installing-the-IDE) to install the appropriate driver for the smartwatch2 usb device, with driver digital signature enforcement off (windows 10 pro x64)
I also had to choose the first of two detected dfu devices by using "dfu-util -c 1 -i 0 -a 0 SmartWatch.dfu " in step 5 and "dfu-util -c 1 -i 0 -a 0 sw2.dfu -s 0x08000000 " in step 8
:highfive:
:good:
Great!
Sidoreczek said:
Hello. Today 04.08.2015 19:54 I found solution to back to live your SW2.
Your SW2 must have access to DFU MODE!!! IMPORTANT!!!
I make by this.
1. Make sure you have dfu util 0.7 or 0.8
2. Download from this tread SmartWatch.dfu <----- this is firmware for Smartwatch 1 (MN2)
3.Copy this firmware to this same folder were you have dfu util.
4. Run Dfu Util.
5. Write dfu-util -D SmartWatch.dfu and Enter.
6. After few minutes your SW2 been flashed and bam its black screen but dont worry.
7. Now when you plug by USB your SW2 to computer you hear the sound DFU
8. Now we make again this same like in number 5 write now dfu-util -a 0 -D sw2.dfu -s 0x08000000 and enter
9. Again after few minutes you see flashing has been finished.
10. Now you can unplug the sw2 from usb and try turn on
11. BAM OH MY GOD ITS WORK
12. Pair with you phone by bluetooth
13. Automaticlly your phone update your watch to newest version.
All files I attach here
And sorry for my bad english. But this solution work for me hopfully working for you guys
All in one
Please tell me if it work for you on this tread
Click to expand...
Click to collapse
Hey!! wonderful post... but I have an issue, i need to recover my sw2 but dfu-util doesn´t work for me, i´m using windows 10 x64, but when i tried to open the dfu-util. exe it suddenly closed up. Can you please help me? I have my watch with the error .32511 for more than a year and i haven´t found a solution yet. Thank you very much
Can anybody help me with this error?
Opening DFU capable USB device... ID 0fce:f0fa
Run-time device DFU version 011a
Found DFU: [0fce:f0fa] devnum=0, cfg=1, intf=0, alt=0, name="@Internal Flash /0x08000000/03*016Kg,01*016Kg,01*064Kg,07*128Kg,03*016Kg,01*016Kg,01*064Kg,07*128Kg"
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
error clear_status
I have the same problem
Hello, I tried many things and my sw2 don't work, the sw2 show an error .3250 and doesn't anything, please i need help. I charged the SmartWatch.dfu and Sw2.dfu and nothing happen after. only showed SONY and .3250 in the part of up.
Very useful post. Tnx guys. But i have a SW2 that just freezing in boot and only a incomplete progress bar displaying.
What should i do??? I can't access to DFU mode.
Help Me
I have a Galaxy Tab S4 device
I installed the following file on it
COMBINATION_FAC_FA81_T835XXU2ARI2_FACFAC_CL14168542_QB19864423_REV00_user_mid_noship_MULTI_CERT.tar.md5
Now the device has reached an interesting and strange situation that I do not know
I want to go back to the previous situation.
I can not get back to download mode.
I want to install back the real firmware.
How do I get out of this situation or I can switch back to download mode.
משה בניית אתרים said:
I have a Galaxy Tab S4 device
I installed the following file on it
COMBINATION_FAC_FA81_T835XXU2ARI2_FACFAC_CL14168542_QB19864423_REV00_user_mid_noship_MULTI_CERT.tar.md5
Now the device has reached an interesting and strange situation that I do not know
I want to go back to the previous situation.
I can not get back to download mode.
I want to install back the real firmware.
How do I get out of this situation or I can switch back to download mode.
Click to expand...
Click to collapse
Suddenly I found the place he could lead me away to the download page.
But he wants a password.
What can I do to find the password.
Misha knew?
Suddenly I found the place he could lead me away to the download page.
But he wants a password.
What can I do to find the password.
Misha knew?
Connect your device to a PC.
Then using adb type the following into a command prompt:
adb reboot download
Then I tried to re-install, and installed something wrong, and it wrote me this:
SCURIYY EROR: THIS DEVICE HAS DEEN FLASHED WITH HNANAHORIZED SOFTWARE & IS LOCKED. CALL YUR MOBILE OPERATOR FPR ADDITIONAL SUPPORT. PLEASE NOTE THAT REPAIR / RETURN FOR THIS ISSUE MAY HAVE ADDITIONAL COST.
I gave it to the repair shop, I hope they will succeed and that it's cheap ...
ashyx said:
Connect your device to a PC.
Then using adb type the following into a command prompt:
adb reboot download
Click to expand...
Click to collapse
Thanks for that tip, Ashyx. That saved my day. BTW, what is that password that the Factory Binary SW asks for? What's the reason for a password there?
I was trying this "Factory Binary" (combination) firmware because as soon as Pie came out for my SM-T835 (Galaxy Tab S4), it was available only for France (CSC = XEF) and I wanted to preview Pie/One UI in my device. Then my region's firmware (Brazil Open, CSC= ZTO) came out and I flashed it on the tablet. For some reason, my CSC became CHO (Chile Open), and I wasn't able to revert it back to ZTO (although it's a Multi-CSC and contain both regions) . Then I flashed
COMBINATION_FAC_FA81_T835XXU2ARI2_FACFAC_CL14168542_QB19864423_REV00_user_mid_noship_MULTI_CERT.tar.md5
(AP only) after having flashed official
T835UBU2ARL1_CL14803871_QB20870118_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
but after entering code *#243203855#, as described in
https://www.sammobile.com/forum/threads/39155-How-to-change-CSC-with-a-combination-file
the code was recognized (cleared from the dialer) but no CSC selection appeared.
Do you have an idea where it went wrong?
Thanks in advance.
Hi,
I updates my galaxy watch by changing CSC but now it is impossible to connect anymore in OneUI!
Wifi connection only is ok
IP Fix ok
Bluetooth Off
On sdb always failed or device offline...
It was ok in the prevoious os version!!!
Maybe someone can help me?
Thank you for help
it takes a while try changing the port to 26099 or 26101 it took me like 2 hours on my first try
I also had problems resetting CSC back to UK after temporarily changing it to get my Galaxy Watch 46mm to get the new Tizen upgrade. Make sure that the watch is still set to debug mode and developer mode is activated after the CSC change and the watch has reformatted itself.
In my case, I could not reconnect to the watch with sdb until I had manually deleted the sdb key & pub files on my laptop, to force the watch to ask me to re-accept the RSA key and let my laptop connect to it again. The files to be deleted are sdbkey and sdbkey.pub under C:\users\username\.tizen (make sure you can see hidden files in Windows Explorer).
Good luck.
AJP
Ok thanks for help but not working!
-> Activate Developpement mode + Debug USB ok
-> Erasing tizen files in my pc
but don't work very strange!It says always 'target is offline'..
studywes said:
Ok thanks for help but not working!
-> Activate Developpement mode + Debug USB ok
-> Erasing tizen files in my pc
but don't work very strange!It says always 'target is offline'..
Click to expand...
Click to collapse
Try using updated sdb version and use phone as Hotspot for both devices.
You can find most up to date version in c/tizenstudio after installing it
Sent from my Samsung SM-G973F using XDA Labs
One step often omitted for getting "sdb connect" to work is after turning on debug, off bluetooth, on wifi, and making wifi connection.... THEN REBOOT the watch.
Thank you for help!!All is ok after a simple reboot!!!!!!!!
Thanks Gruuvin
I can not run SDB on my Win 10 64bit.
Downloaded SDBstarterKidv1 unziped sdb_2.2.60_windows-64 and navigated cmd to C:\Users\Petr\Desktop\SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools
sbd shell does not work.
C:\Users\Petr\Desktop\SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools>sdb shell error: target not found failed environment shell, so it will retry shell command. error: target not found C:\Users\Petr\Desktop\SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools>
Can you guys help me?
run with admin rights or make path var. on PC it's really sensitive about what and where stuff is installed
can't connect
petrmelis said:
I can not run SDB on my Win 10 64bit.
Downloaded SDBstarterKidv1 unziped sdb_2.2.60_windows-64 and navigated cmd to C:\Users\Petr\Desktop\SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools
sbd shell does not work.
C:\Users\Petr\Desktop\SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools>sdb shell error: target not found failed environment shell, so it will retry shell command. error: target not found C:\Users\Petr\Desktop\SDBstarterKidv1\sdb_2.2.60_windows-64\data\tools>
Can you guys help me?
Click to expand...
Click to collapse
I have the same problem, did you solve it somehow? or what solution.
also can't connect from windows 64.
Most old methods of changing the region on the samsung watches don't work anymore. Given their return policy I thought I bought expensive junk.
*#272*719434266344#
Click to expand...
Click to collapse
starts the csc selection but doesn't actually change the region.
TL;DR you need to install the combination firmware and edit two files
INFO: Netodin works fine in linux as well with wine since it works over the wifi
1. Start NetOdin3 click options and disable auto reboot
2. Click AP and select the combination firmware
3. Hold reboot button on the Samsung watch, when the reboot screen shows up press home multiple times to get into the boot menu
4. Jump to the Download (Wireless) and hold the boot button again to get into the Firmware download menu
5. Press the same button to more times to switch the watch to AP mode
6. Connect your wifi to the watch SM-R830-someid
7. In NetOdin3 press Start to flash the combination firmware
8. Click reset and now press CSC button
9. Select the CSC md5 and press start
10. When you reboot the device hold the boot button again until you enter the boot menu again
11. Select recovery and let the device restart
12. Enter settings -> About watch -> Software -> Tap software version until debug mode starts (you may need to restart your watch)
13. Connect watch to wifi
14. sdb connect <watchip>
15. sdb root on
16. sdb shell
17. backup active-customer.info: sdb pull /csa/csc/csc-active-customer.inf
18. backup prodcode.dat: sdb pull /csa/imei/prodcode.dat
19. edit /csa/csc/csc-active-customer.inf and replace csc code (I used vim and the XAR for the US version, https://www.geeksforgeeks.org/vi-editor-unix/ )
20. edit /csa/imei/prodcode.dat and replace last three characters to csc code you want (don't enter the csc selection after this it will reset it to the factory region)
21. reboot the device into recovery (i used /usr/bin/csc-util --reboot customer_change but i'm not sure it's necessary)
22. run netodin again and select AP, BL and CSC to flash stock
23. enjoy samsung pay if you have a US credit card (seems like you no longer need to install samsung pay apks on non samsung phone it's part of the wearables app)
R830 combination firmware
https://www.file-upload.net/download-13751174/combination-R830XXU1ASI2.7z.html
R830 3 file firmware
https://www.file-upload.net/download-13751206/multi-3file-R830XXU1BSI9.7z.html
sha256 checksums:
e719a024540706c07ae956c2a737b43dcaefa2b3335b1118121b6ca8168089ab AP_R830XXU1BSI9_usr.tar.md5
d0be4fdd7f5abaa6a4520f487b85dec14f94dd9d14a239fde69f5281817f7d99 BL_R830XXU1BSI9_usr.tar.md5
8f28bee9aa56b5c8d2fb8fa7bf16ab5cf0c3bff5fc547e2ada18a90c161f61e5 COMBINATION-FT40_R830XXU1ASI2.tar.md5
efe5e799c95c70aa1de8cced5a544bc471b2b74f61a3babffa72a7e295804225 CSC_OXA_R830OXA1BSI9_usr.tar.md5
Click to expand...
Click to collapse
Thanks to @adfree for the links and purcival for the order of how to flash the combination firmware and stock after
[0] Netodin
[1] how to change region on samsung gear s3
[2] combination firmware for sm-r820 by @adfree
[3] sdb in tizen studio CLI tools section
Hi,
Can l use this method just for updating the firmware of my watch?l'm still on R830XXU1ASHF.. if yes should l follow all these steps??
Thanks
What csc your watch?
tb_ said:
What csc your watch?
Click to expand...
Click to collapse
Thank you for your reply,l bought my watch in UK.
According to the list the csc is BTU-UNITED KINGDOM.
A Beginner
Hi,
First of all I want to thank you guys for the grat work.
I want to say that I am actually a beginner or amature when it comes to what you are doing
The instructions are very clea. But I would really appreciate it if anybody describes what to do with more details, especially the codes of sdb. Just some more details
It would be great if you can upload a video "If possible"
1. What is the worst thing that might happen if I do something wrong? Can the watch be ruind? Can I fix it if it happens?
2. Where can I find the csc of my country "Sweden" I googled it and found like 5 or 6 different csc !! Is there any trusted source?
3. Is it appliable to R820??? the 44mm model? or do I need to do something different in my case??
Thanks in advance
Coming from the other thread to confirm this worked for me, thanks a ton! Didn't think it would be that simple with just editing two text files.. lol
For those who missed it(I did), some steps are missing where one has to repeatedly connect back to AP every time something has to be done in NetOdin.
Also if anyone is confused about the steps, it's pretty much the same process for all samsung watches so just search for it on youtube, it's there.
Out of curiosity, where did you get the firmware from?? @tb_
2avrmillion said:
Coming from the other thread to confirm this worked for me, thanks a ton! Didn't think it would be that simple with just editing two text files.. lol
For those who missed it(I did), some steps are missing where one has to repeatedly connect back to AP every time something has to be done in NetOdin.
Also if anyone is confused about the steps, it's pretty much the same process for all samsung watches so just search for it on youtube, it's there.
Out of curiosity, where did you get the firmware from?? @tb_
Click to expand...
Click to collapse
Hi ,
Thanks for your feedback,are the sdb thing code mandatory?on youtube they only add the 3 or 4 files on odin and just flash it...
Hey guys, firstly thankyou! This worked perfectly and now I'm able to use Samsung pay down in Australia! Only thing that I would add from the perspective of being a complete beginner to Odin, is how to save the files when you edit the CSC (press escape then type ":wq") it took me an extra 20 minutes to figure it out and I thought someone might find it useful
2avrmillion said:
Out of curiosity, where did you get the firmware from?? @tb_
Click to expand...
Click to collapse
Got it from a third party. I was worried that it was counterfeit so before installing it I went through the system files to see if it's really the right model. But I can of course not guarantee that it wasn't modified by a third party. But I kinda assume that samsung won't boot from any random image given that you can't downgrade Samsung and even their tizen to any version you want apparently.
dodo1515 said:
Thank you for your reply,l bought my watch in UK.
According to the list the csc is BTU-UNITED KINGDOM.
Click to expand...
Click to collapse
{tizen} % cat preconfig/BTU/preset/csc-preset.ini
[default]
keyboard_lang="en_GB"
keyboard_preinstalled_lang="1^en_GB#en_US#de_DE#fr_FR#it_IT#pl_PL^en_GB
Click to expand...
Click to collapse
The csc.img has BTU inside. But I can't guarantee you anything when I ran this with my zone set to XTC it was booting fine but I couldn't get my phone to connect / initialize the watch after the factory reset. But not sure if it was the app or because i didn't properly reset or if I maybe shouldn't have reset.
So I can tell you that it will boot without issues but whether it works no idea. Maybe someone else can comment on that.
Highpryority said:
Hey guys, firstly thankyou! This worked perfectly and now I'm able to use Samsung pay down in Australia! Only thing that I would add from the perspective of being a complete beginner to Odin, is how to save the files when you edit the CSC (press escape then type ":wq") it took me an extra 20 minutes to figure it out and I thought someone might find it useful
Click to expand...
Click to collapse
I think you are talking about steps 17 and 18. If so can you please till me a bit more detailed how to do these steps ! I mean Do we edit manually in the sdb?? or how are we editing? Why do we need to save the files after editing? there is nothing about saving files in the steps above!
Sorry if my questions are silly but I am a real beginner here!
tareqsy91 said:
1. What is the worst thing that might happen if I do something wrong? Can the watch be ruind? Can I fix it if it happens?
Click to expand...
Click to collapse
No one will give you guarantees on this because no one wants to blame if something goes wrong. But if you try absolutely under no circumstances interrupt the flashing process and absolutely don't use the wrong model ROM. Also to be safe don't try to flash a firmware that has a lower version than your current one.
tareqsy91 said:
2. Where can I find the csc of my country "Sweden" I googled it and found like 5 or 6 different csc !! Is there any trusted source?
Click to expand...
Click to collapse
csc usually depends on the vendor. So there are a bunch of sweden csc's . But you should be able to find your current csc in /cas/imei/prodcode.dat
a list is on droid views
tareqsy91 said:
3. Is it appliable to R820??? the 44mm model? or do I need to do something different in my case??
Click to expand...
Click to collapse
r820 is the 44mm bluetooth model.
825 and 835 are lte with one version being US and the other being global I believe.
tb_ said:
No one will give you guarantees on this because no one wants to blame if something goes wrong. But if you try absolutely under no circumstances interrupt the flashing process and absolutely don't use the wrong model ROM. Also to be safe don't try to flash a firmware that has a lower version than your current one.
r820 is the 44mm bluetooth model.
825 and 835 are lte with one version being US and the other being global I believe.
Click to expand...
Click to collapse
Lower frimware? I have Tizen version 4.0.0.7
1. Do you know if the availabe combination frimware for R820 is of a lower frimware??
2. Yes My R820 is the 44mm bluetooth. thats correct. I guess I should use R820 which you linked in your original post!
3. Can you please describe more about steps 17-18 I didn't really understand how to edit! It's my first time using this sdb thing
Thanks for your patience everybody answering or even reading my questions
I think I am the most commenting member on this topic.
I have read a lot and almost all the details in each shared link in this thread.
I am trying hard I swear. Lately after downloading the shared files in the links in the original post. I can't start the file "web-cli_Tizen_Studio_3.3_windows-64"
It is just flashing a cmd window and nothing happens after that!
What should I do in this case??
The other file in the link "web-ide_Tizen_Studio_3.3_windows-64" is telling I should have JDK software which I installed but It didn't help anyway!
tareqsy91 said:
I think I am the most commenting member on this topic.
I have read a lot and almost all the details in each shared link in this thread.
I am trying hard I swear. Lately after downloading the shared files in the links in the original post. I can't start the file "web-cli_Tizen_Studio_3.3_windows-64"
It is just flashing a cmd window and nothing happens after that!
What should I do in this case??
The other file in the link "web-ide_Tizen_Studio_3.3_windows-64" is telling I should have JDK software which I installed but It didn't help anyway!
Click to expand...
Click to collapse
Don't use that because I had the same issue in Windows 10. Go to https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330 and download SDBstarterKidv1.zip. Extract it and run ansicon.exe under data/tools folder. It will open a command prompt.
shinzomask said:
Don't use that because I had the same issue in Windows 10. Go to https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330 and download SDBstarterKidv1.zip. Extract it and run ansicon.exe under data/tools folder. It will open a command prompt.
Click to expand...
Click to collapse
Thanks for the advice
I haven't done Netodin steps yet.
I am trying now to just connect the watch to the computer through the wifi network.
I have debugging mode on in the watch but I still can not connect to the watch
It keeps telling me failed to connect
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
Is it normal I can't connect before doing the netodin steps??
tareqsy91 said:
Thanks for the advice
I haven't done Netodin steps yet.
I am trying now to just connect the watch to the computer through the wifi network.
I have debugging mode on in the watch but I still can not connect to the watch
It keeps telling me failed to connect
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
Is it normal I can't connect before doing the netodin steps??
Click to expand...
Click to collapse
Normally the watch comes up with a prompt to allow your pc to connect to your watch. Maybe you might have to restart your watch. I would try the netodin step first because it might be more straightforward to connect the combination firmware to the computer because I didn't get any prompt on that.
Also maybe check that your virus scanner/firewall isn't blocking access.
shinzomask said:
Normally the watch comes up with a prompt to allow your pc to connect to your watch. Maybe you might have to restart your watch. I would try the netodin step first because it might be more straightforward to connect the combination firmware to the computer because I didn't get any prompt on that.
Also maybe check that your virus scanner/firewall isn't blocking access.
Click to expand...
Click to collapse
I've tried to turn off my antivirus and firewall but still no connection.
The newer versions of sdb 4.1.8 is showing the following:
The version of SDB client (4.1.8) and server (2.2.60) are different.
This may cause version compatibility problems.
It is recommended to use SDB server 4.1.8. *
I've tried to turn off my antivirus and firewall but still no connection.
The newer versions of sdb 4.1.8 is showing the following:
The version of SDB client (4.1.8) and server (2.2.60) are different.
This may cause version compatibility problems.
It is recommended to use SDB server 4.1.8. *
Click to expand...
Click to collapse
1.
sdb.exe once started is Background process...
To close active sdb you can do this:
Code:
sdb kill-server
2.
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
Look into this old post...
Try to read:
Code:
Guidelines_on_Connecting_GearS2_device_using_WiFi.pdf
Guidelines_on_Connecting_GearS2_device_using_WiFi_151222.pdf
Ignore Gear S2 text... because this is same shhh... since years...
Mandatory is to find your correct IP.
Hint...
Maybe it helps to try different PCs or Notebooks... sometimes more luck on other device... but only with correct IP in Command...
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
Click to expand...
Click to collapse
If these digits are correct...
Command Line looks like this:
Code:
sdb connect 192.168.0.16
Not more not less... NO need to add something behind...
Best Regards
This is driving me crazy guys
Still cannot connect to the watch through wifi yet
I am getting this answer now
* server not running. starting it now on port 26099 *
* server started successfully *
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
I am trying on both the older and the newer versions of sdb
Debugging mode is on in my watch
When writing same command again "sdb connect 192.168.0.16" I get weird figures or "error: target offline" in the newest version of sdb
I have even tried to create a private wifi from the computer I use and connect the watch to the same network but it didn't help either.
I am still only trying to connect the watch to the computer through sdb. I haven't done the odin steps yet. I am afraid doing odin steps and not being able to complete the sdb connecty steps !!
I have another question:
Where I live in Sweden. Samsung didn't release a bluetooth version at all. That's why I bought mine from Germany.
If I change my csc to Sweden. Will it work as there is actually no swedish bluetooth SM-R820 !! I mean that mine watch will be probably the only bluetooth r820 with swedish csc !!!! will I get updates as usual? will the watch even work?
@tareqsy91
1.
You have nobody who can help you?
No family... no friends nor neighbar with second/other PC... Notebook?
I am using different PCs with:
Win XP
Win 7
Win 8
Win 8.1
Never tried with sh .tty Win 10...
1.1
Maybe give infos what you use... Windows Version AND 32 bit or 64 bit
2.
Sweden or Germany...
No matter...
F. device work with byteexact Values... Sales Code aka CSC...
2.
Their are few other methods to READ EXACT infos from device... instead talking about blabla Sweden or Germany...
Look at this post... with screenshots...
App which can read these 2 files from Watch:
https://forum.xda-developers.com/showpost.php?p=80072694&postcount=786
Code:
com.somyac.gear.transfer.lite
Best Regards