Yesterday,
my samsung j2 mobile directly hangs and no any button is working so directly romoved batter reinsert it and booted , but it doesn't boots
Stuck at samsung logo.
So i decided to hard reset it
But it stiil gives error while hard resetting in red colored text
So i tried to flash stock rom using odin but it says pass flashing
But now my mobile is showing only download mode
And doesn't showing anything ,doesn't booting, doent goes to recovery mode also
No replies so far ! have the same issue here !
Related
I have a Sprint GS3 with CWM 10.2.1 nightly that was installed
I was at work today when I noticed the phone restart and come back up to the boot screen, it stayed there for a good 5 minutes so I tried restarting it, same thing happened
I am able to get into download mode and CWM recovery mode
I put the phone in download mode and flashed the stock ROM via Odin. Odin showed PASS, but the phone had multiple errors in a wall of red text. Most were ERROR mounting
Now it boots into the Samsung logo and freezes there. Is there a way to fix this?
Hello,
I tried to get custom ROM, it stopped because of errors.
Restored stock ROM thru ODIN.
ODIN says : PASS, phone reboots, it shows Samsung animation and then stops at static white SAMSUNG letters...
I re-flashed thru ODIN 5 times, it stops at the same picture...
P.S. I cannot boot recovery, downloading mode only...
Any advice?
Thanks!
--------------
FIXED!!!
I put TWRP through ODIN, and booted to TWRP, and formatted everything.
Then put custom image.
Hello friends, my problem is that i can't boot and i can't enter recovery mode. I can enter download mode with jig or with vol + and - with usb cable, i can install fresh firmware but after reboot the phone shows samsung logo, then a progress bar, when the progress bar gets to the end the phone gets stuck with a black screen.
i tried to flash a recovery-clockwork-touch-6.0.3.1-hercules recovery with sucess but i can not enter recovery mode or boot up the phone, and after the reboot i get the black screen described above.
Please help!!
Did you use Odin to flash stock firmware? Did it work??
Yes, i can use Odin to flash a 4.1.2 stock firmware sucessfully, but after reboot it doesn't boot, get stuck after samsung logo.
i was on stock firmware when the phone stop responding and shut it self down.
I changed the rom from CosmicCM 4.5 to original I9082XXAMF5_I9082OLBAMF1_XSE via Odin v3.07, the phone was successfully flashed (I checked Auto Reboot & F.Reset Time). When the phone reboot it go directly to android recovery mode, but it didn't load completely and get stuck (hang) on the green robot screen with all animation was stopped.
I tried to boot the phone several times but no avail, it always stuck on the android recovery mode like before. I also tried to flash the phone with CWM Philz TouchWiz recovery but the results were the same, the recovery mode didn't load completely stuck at green robot screen.
If you guys happened to experience the same problem with me, please kindly tell me what is the problem and the solution. Thanks a lot!
..
Thanks for the reply, I followed your tips and unfortunately the phone still stuck like before. Maybe it's time to visit service center.
Sent from my GT-I9100 using XDA Premium 4 mobile app
hi my sons s4 was working fine yesterday, he got up this morning and tried to turn his phone on, but it keeps rebooting over and over
i have tried to get it into recovery to wipe everything but that flashes up top left in blue "recovery mode" and then goes back to the boot loop
i have downloaded the right firmware for this model and booted into download mode fine, and re flashed in odin everything a success.
phone reboots and goes back into boot loop
nothing has been messed with or modified its stock, is there any way to fix this or will it have to go back to samsung ?
thanks