Develop Bugs

Hard Reset\Bootloader\Error 270 3% on Flash

Hard-Reset:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or another way Start\Accessories\Clear Storage 1234
--------------------------------------------------------------------
How to access Bootloader:
NRG: Turn your phone completely off. Pushing the camera button in, plug in your usb cable. The tricolor, bootloader screen will come up and you can flash your regular OEM ROM which can be downloaded from one of the stickies.
Click to expand...
Click to collapse
-----------------------------------------------------------
Flashin: Error 270 Stuck at 3%:
You need to unzip the folder attached.
1. Transfer "SP_AllowCertificateInstall" to your dash and click on it to install it. (Folder 1)
REBOOT
2. Run "SDA_ApplicationUnlock" from your desktop, with your dash connected. (Folder 2)
REBOOT
You might need to run both a couple times.
Files needed

This is very valuable information that every new member needs to have, right of the back . They should know this stuff before they even start flashing or modding , so that they know how to reset the phone back if they screwed up.

Tmo dash freezes
--------------------------------------------------------------------------------
How do I flash my tmo dash from bootloader. I get a error of 274 or 260. It also freezes on start up or hard reset at the tmo home screen. Help please.

Thank you for saving my *butt*. My phone was freezing when it got to the 'Windows Mobile' Flash screen at boot.

sincap said:
Click to expand...
Click to collapse
Hey ,
I have been searching for the hacked bootloader so that i can flash my Dash with any ROM ,
I got the Bootloader file but am still in the dark as to how the bootloader is flashed ??
Any help Please ???

Hacked Bootloader
post deleted

Delete double post
drnayeem said:
Hey ,
I have been searching for the hacked bootloader so that i can flash my Dash with any ROM ,
I got the Bootloader file but am still in the dark as to how the bootloader is flashed ??
Any help Please ???
Click to expand...
Click to collapse
Please do not double post
Respect the rules

I need help.
I have installed the upgrade and the eT9 full but my phones keyboard still isnt working correctly
...help

windows 6.5
regarding the 3% problem i tried to fix it as shown 5 times but nothing appear to work
plz need help

thank u very much

try not to restart after SDA_ApplicationUnlock.exe and hope this will help.

I have transferred the setup.xml to my phone but when I click it, it seems to open and view the XML code. I don't think it installed anything.
I did it a few times, same thing..
WHen I run the part 2, it unlocks but after running ROM, it fails are 3% again.
Do I have to put the p1 file in a certain folder?
help...

vtec525 said:
I have transferred the setup.xml to my phone but when I click it, it seems to open and view the XML code. I don't think it installed anything.
I did it a few times, same thing..
WHen I run the part 2, it unlocks but after running ROM, it fails are 3% again.
Do I have to put the p1 file in a certain folder?
help...
Click to expand...
Click to collapse
The first file is SP_AllowCertificateInstall.cab do not extract the .cab just place on phone and run with file explorer to device memory then follow the other directions, may take more than one go on the whole process to get it working.
Good luck.

stylez said:
Hard-Reset:
or another way Start\Accessories\Clear Storage 1234
--------------------------------------------------------------------
How to access Bootloader:
-----------------------------------------------------------
Flashin: Error 270 Stuck at 3%:
You need to unzip the folder attached.
1. Transfer "SP_AllowCertificateInstall" to your dash and click on it to install it. (Folder 1)
REBOOT
2. Run "SDA_ApplicationUnlock" from your desktop, with your dash connected. (Folder 2)
REBOOT
You might need to run both a couple times.
Files needed
Click to expand...
Click to collapse
omgggg thankkkk youuuuuuuuuuuuuuuu it workeddddd!!!

What do you mean with reboot or restart?
Hi, so sorry if this question bother somebody, but What do you mean with reboot or restart? just turn off and on again the phone,, right? I still can't unlock my phone to run the rom. thanks for any help.

profesor2001 said:
Hi, so sorry if this question bother somebody, but What do you mean with reboot or restart? just turn off and on again the phone,, right? I still can't unlock my phone to run the rom. thanks for any help.
Click to expand...
Click to collapse
Reboot = Soft-Reset = Restart off & on

thanks thanks
This is a very important post
thank you very much.

Waste of Time
Before anybody starts refering me to other "stikys" i have followed all the neccessary steps to do a hard reset and ran the sda unlock and i still get the error 270 corrupt file error. I have tried everything and still no luck. So much hype surrounds ookbas 6.5 and i have yet to test it out. Any help would be nice.

i did both of the SDA unlock and installing the SP_Allowcertifcateinstall over and over again and still got the error 270 at 3%. But before posting this, i did the sda unlock install, restarted, then did the Excalibur USPL- CID BYPASS (boht files attached)..and followed evrything in the readme file, then after getting the white screen, simply disabled the usb connection and then ran the romupdate and it worked for me..
hope this helps

[Exclusive]( WM6.1 ) Windows Mobile 6.1 Eng for HP IPAQ rx1950

Exclusive Windows Mobile 6.1 ( WM6.1 ) English for HP IPAQ rx1950
Done by Victory144 & Guifort
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested and all work very well....
Downland:
RAPIDSHARE
MEGAUPLOAD
FREE (FRENCH)
Mirros by Guifort...
See YouTube Short Demonstration Video
See YouTube Long Demonstration Video *Best Quality*
Windwos Mobile 6.1 For Ipaq rx1950 KITCHEN (For Devolopers and Advanced Users Only)
Download. MediaFire
​
Windows XP only.
1. Connect you Device To PC "USB CONNECTION" with Microsoft ActivSync Installed...
2. Follow the instruction .. (May appear some device notification to
allow recognize of the device correctly and changes to flash mode etc " You Must Always Click Accept" or you will not be able to flash your device)
3. Run "hpRUU" tools to and follow the instruction.
If the program can not flash for some reason, try to put your device in "Flash Mode" Manually by pressing "Contact + Email + Reset together" and try again.
4. When the process finish ..The device will restart automatically.
5. When the boot loader is loading Make HARD RESET ( By Holding " CALENDAR + WIRELESS + Reset " For 3 Second !
6. Wait to re boot... "it may take about 2 or 3 Minute for the First time" ....
7. Calibrate the screen as Usually ..
8. Now go to " Start / Programs / Address Book " Run that Allow the two files needed ( By Accepting the notification Bellow)
9. In the same program go to "Menu /Option" And In the first tap "General" Mark this options :
Set as default contact manager
Assign on hardware button
10. Then Press OK ... Exit the program
11. Soft Reset...
12. Accept the notification about the WIFI program ! Then will appear in the Today menu the WIFI Icon where you can Power On /Off the wireless ....(As the default "Hp Wireless manager" dose not work properly).
Done!
Optional you can install the office cap as usually ! included ...
Click to expand...
Click to collapse

Great job - it's wonderful -so far just one minor problem. Task manager is still in Russian in "programs". UC and .NETCF 3.5 would make it even better.....

Thanks ...
The task manager can be changed from File Explorer / root / Windwos/Start Menu/programs/ then Select that Rename to Task Manager .. Its Done !
NETCF 3.5 i cant cuz theres no more space to add any thing on the rom as it 32 MB !

Problems
I run the hpRUU at one time it says Unknown Device. What should i do?

Very Nice!!
I've used this rom for a couple of weeks now and so far only one problem, the wireless connection fails to reconnect after the power is turned off. I have figured out a way to circumvent this problem. Uninstall the WifiIO and use the wireless button as you would in WM5, but before it disconnects pick the view wireless networks link and press Menu -> Turn Wireless On. What a PIA, but the faster operating system definately makes up for it. Thanks a bunch Victory!

2 "rubarht123" You are welcome ! Thanks for the tip .. Can you be more clearly about yuor setting ?
2 ".bin" Make sure youve Microsoft Active Sync installed and the Ipaq connected to it ! Then try !.....Good Luck ...

Rom for Ipaq h5550?
I hope I am not committing some sort of faux pas by asking this, but what would you charge for a WM6.1 rom for an Ipaq h5550? I could supply a machine for testing.
I am dead serious about this and am willing to pay. Please advise.
Thanks!

Re: Settings
I'm not sure what you mean by settings, but the wm5 normal button for wifi is rendered useless under wm6.1...you have to use wifiIO for some reason. I have sktools free version installed and could have deleted reg setting don't know though. Reinstall wifiIO and still disconnects after power. I've looked in windows dir. for wifion.exe but only find wifioff. Prefer wm5 button to wifiIO, wish there was a way to get it working again. Thanks.

6.1 installation
Hi,
I downloaded the software thanks btw
extracted files
connected pda with activesync
launched hpRUU.exe
followed on screen instructions
watched progress on pda
I now have an error wrong image on pda when i try to reset.
tried relauncing exe but i have no comms to pda from pc.
Help please!

Hello
Your pda can't boot ? you can reflash it with the SD Card method if you have make a backup.

2 "BTE72"
Please see this thread : http://forum.xda-developers.com/showthread.php?t=509976

hello,
tis pot sounds awesome. i downlaoded ur file. started to patch. that flasher recognize my ipaq. i then continue but my screen freezes at HP INVENT white screen u know. nothing happens. i can reset and turn back to my ipaq wm5 but why i cant do a flash? thanx.
i think a video will be awesome.can u do it pls? thanx.

2 "mrbigtime"
Maybe if you Hard Reset that first, will work ! Do not forget to backup your data !
If not you can try to put the pocekt in FLASH MODE ..i do not remember the correct combination :
1:
HOLD TOGETHER Calender + Wireless + RESET For 5 SEC more or less
HOLD TOGETHER COntacts + E-Mail + RESET For 5 SEC more or less
One for Hard Reset and the other for FLASH MODE .....
Also if dose not work, you can upgrade the (Boot Loader) first then try ...
http://forum.xda-developers.com/showthread.php?t=509976
Ill try if i can found a camera to make the video ....But Just Demonstration not Tutorial to install .... As i do not have a time for that ....
Good Luck....

NICE ROM! but sdhc is not working for me
This rom works fine, but my sd card is not being recognized
I would like to know if anyone has come into the same problem an found a solution.
Have a Sandisk 4gb SDHC card. If you install drivers in rx1950 wm5 version it will work flawlessly.
I thought wm6.1 would recognize it without patched drivers but no luck, and all drivers installation process end with "unsuccesful" message.
please, is there a solution?

victory144 said:
2 "mrbigtime"
Maybe if you Hard Reset that first, will work ! Do not forget to backup your data !
If not you can try to put the pocekt in FLASH MODE ..i do not remember the correct combination :
1:
HOLD TOGETHER Calender + Wireless + RESET For 5 SEC more or less
HOLD TOGETHER COntacts + E-Mail + RESET For 5 SEC more or less
One for Hard Reset and the other for FLASH MODE .....
Also if dose not work, you can upgrade the (Boot Loader) first then try ...
http://forum.xda-developers.com/showthread.php?t=509976
Ill try if i can found a camera to make the video ....But Just Demonstration not Tutorial to install .... As i do not have a time for that ....
Good Luck....
Click to expand...
Click to collapse
Thank you very much.but sadyly nothing works and my PDA is already uptodate...very interesting
and mostly when i try to flash it says HP ROM UPDATE(or what ever it is) STOPPED WORKING message appears. iam not ven sure if it works or not

I ran the hpRUU, but after it restarted, now it won't turn on and I can't do a soft reboot or hard reboot. I've tried everything I can think of and I don't know what else to do. Any suggestions?

mabe you already tried this...removing the battery. wait some seconds, put it back again.
it has worked for me when my ipaq rx1950 doesnt starts. Dont know why it happens but it has made the trick when it doesnt turns on.
if that works, remember to hard reset the device or it will not pass from boot screen.

I tried taking the battery out and leaving it for a few seconds, but that didn't help either. It's almost like all of the buttons are not responding anymore.

2 "sdwestbroek"
Make sure you've the battery charged ...
then remove the battery for about 2 to 5 minutes ....Then plug the battery again ... and the pocket must turn on automatically ! just wait about 4 to 10 sec....
Hope this help .. i and the same problem ..and solved with this method ....
2 "mrbigtime"
Try to download the file again .. from another host ... and then try ... Thats maybe solve the problem ..Other thing you must be in Windows xp and disabled the Anti-Virus ..ect ....Thats may solve your problem....
Good Luck for all....

WM6.1 Works excellent but the only thing is that he does not reconize my TomTom antenna anymore?
why not ?

GT-P5210 stuck on boot screen after trying to root

EDIT March 11, 2016: Finally found a solution and no data was lost!
See post #5.
(is there no way to indicate on the thread that this is solved? I don't know exactly how it works on this forum...)
---------------------------------------------------------------
Hi!
So I've posted my problem on another forum but didn't get any reply, and I just realized I might have more chances to get faster replies on here.
Well, to make it short, I've tried to root my mothers' Galaxy Tab 3 (GT P5210), and as I've already rooted several devices (including another Galaxy Tab) without any problem, I didn't bother saving all the data on it... I'm afraid this was a big error.
I decided to root because it was getting stuck sometimes because of too many things running at a time in the background, and it made the tablet unusable until I reboot it. I wanted to install Greenify and make it work alone so my mother doesn't have anything to worry about but play without the tablet getting stuck. But I needed to root to use Greenify at its best...
As I've rooted several phones before, I know rooting doesn't wipe any data, unlike flashing seems to do. So I wasn't afraid of doing it.
I've followed this tutorial after installing the drivers.
Everything seemed to work correctly, Odin did what it had to do and it succeeded.
Though, now I can't turn on the tablet anymore: if it's turned on and that I press and hold the Power button, the "Samsung Galaxy Tab 3" screen shows up. But it doesn't move, it just stays here and does nothing.
I can turn it off, and try again, but the result is the same.
On the Internet I've read that charging it to 100% could solve the problem, but it doesn't seem to do anything as it was plugged all night and it's the same.
Now I've tried all combinations of buttons, because it was said that a second solution was to wipe the cache partition. But the only combination that works is Volume Down + Power, which brings the Download mode I had to get through in order to run Odin.
I've found this tutorial on here, but I don't even know if the correct word for my situation is "brick". And like many things I've found on the net, the tutorials for unlocking the tablet are for the tablets that have been flashed. But this is not what I wanted to do and I hope this is not what I did. And it doesn't inform if I'll lose data or not... which I'm afraid of.
I made the error of not making any backup before starting the process... I seriously hope nothing is lost.
Is there a way I can restart the tablet correctly again, even if I have to unroot, without losing anything?
Thanks by advance!

(sorry for the double-post)
No one?
Please, at least give me a clue on what I should do, or if there's hope to get back the data from it.

Joey79100 said:
(sorry for the double-post)
No one?
Please, at least give me a clue on what I should do, or if there's hope to get back the data from it.
Click to expand...
Click to collapse
I don't know if you've lost data or if this method will wipe data, but it's what I used to root stock kitkat
Method
Also - I seem to remember that you should uncheck auto reboot, and after flashing is finished power off and back on
Good luck

Thank you for your answer.
The thing is that I've already gone through some steps of the tutorial I linked in the OP (until step 10 / step 11), and when the tablet was meant to reboot, it got stuck on the "Samsung Galaxy Tab 3" screen. I can turn it off and on, but it won't go further than this screen.
I can still bring up the Download Mode (by pressing Volume Down + Power), but there's no way to bring up anything else. Even the debug menu with Volume Up + Power (though I don't know if it was even available this way before trying to root). It will just load the boot screen and nothing more.
I'd try something with the Download Mode only if I can be sure that no data will be lost. If it may erase data, I prefer not doing it and to find a way to get it back before anything else.
Do you know if there's some way to access the memory?

Okay okay... I've struggled a long time with this problem, brought the tabled to a local repair shop but didn't find anything that couldn't risk any data loss... And finally I've found something, so I'll post my solution in case other people have the same problem.
Remember, I could only boot the tablet in Download mode. Every other button combination led me to the boot screen.
The problem was indeed the cache, that I needed to wipe, but without being able to access the Recovery mode there was no way to do it.
-------------------------------------
Solution:
First, I downloaded Odin 3.07 from somewhere else than from the link given in the tutorial (quick search on Google), because I had to untick Auto-reboot. Actually I'm not sure this is needed, but it worked for me with it unticked (while the version of Odin given in the tutorial doesn't let you untick it).
Then, download TWRP for P5210 (a quick search through Google led me to this ). Take out the .tar file from the .zip, but DON'T try to extract anything from the .tar file.
(basically, we'll "install" it onto the tablet using the same method as described in the tutorial)
Boot the tablet in Download Mode (Volume- and Power), choose Continue (Volume+ IF I remember correctly, but it's written anyway), then plug the tablet to your computer.
Run Odin, untick Auto-Reboot (as said before, not sure it's needed, but oh well, it worked...). Then click PDA, select the file you've downloaded (for me it was twrp-2.8.6.0-p5210.tar).
Then press Start, and wait (I waited approx. 2 minutes) until Odin displays "PASS!".
Now unplug the tablet, and turn it off.
Turn it on with Volume+ and Power, this time it will bring you to the TWRP menu (it asks to stay in Read-Only mode or not... choose no). Go to Wipe > Advanced Wipe, and tick Cache ONLY. "Swipe" to start the operation, wait, wait... then, once it's completed, press back until you go back to the main menu, press Reboot > System (then Swipe).
Now the tablet will boot normally. It won't be rooted, but at least it will work again, and fortunately, without any data loss.

You couldn't flash super user from TWRP?

I have the same issue, my Tab 3 is stuck on the Samsung logo.
And the Odin is stuck on the file mentioned above.
Can someone please help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Touch not working after display assembly replacement

Got my replacement display assembly a couple days ago and went on to replace the screen. Connected everything back and everything seems to work - except for the touch screen functionality.
Checked the ifixit tutorial for display assembly replacement and found that someone commented that he has the exact problem, stating he found a guide to "remove the metal protection over the connector to properly disconnect it and reconnect after"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Checked the connection multiple times, seems to be connected properly, which makes me assume that what he did works. Thing is - I don't understand how am I supposed to remove everything and put it back together.
Any help?
Thanks.

firecharge said:
Got my replacement display assembly a couple days ago and went on to replace the screen. Connected everything back and everything seems to work - except for the touch screen functionality.
Checked the ifixit tutorial for display assembly replacement and found that someone commented that he has the exact problem, stating he found a guide to "remove the metal protection over the connector to properly disconnect it and reconnect after"
Checked the connection multiple times, seems to be connected properly, which makes me assume that what he did works. Thing is - I don't understand how am I supposed to remove everything and put it back together.
Any help?
Thanks.
Click to expand...
Click to collapse
The copper looking piece is held in with small clips around the edges. I used a small flat head inserted into the corners and pried straight up to lift it out of the clips. It came off pretty easily. Then you just need to line it back up with the clips and press down to replace it.
Sent from my ASUS_Z00A using Tapatalk

buddy factory reset your device once. there might be difference in touch version.

kenbo111 said:
The copper looking piece is held in with small clips around the edges. I used a small flat head inserted into the corners and pried straight up to lift it out of the clips. It came off pretty easily. Then you just need to line it back up with the clips and press down to replace it.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Thanks
That worked great - though there is a different issue now.
Phone seems to keep locking and unlocking itself every few seconds.
Seems to be an issue in the connection between the bottom and top parts of the mobo.
Any idea about what could be the issue here?

Hi, I don´t want to make new thread, maybe someone can tell me how to fix my problem.
I changed Lcd+touch for my ZE500CL/Z00D and first Touch Panel Firmware update failed, but after hard reset trough recovery it started to work. But now every time I turn it off nad on / or just reboot, it updates touch panel firware.. luckily successfully... but every time.. I use last official SW version (V12.16.5.126 ).

Mairo said:
Hi, I don´t want to make new thread, maybe someone can tell me how to fix my problem.
I changed Lcd+touch for my ZE500CL/Z00D and first Touch Panel Firmware update failed, but after hard reset trough recovery it started to work. But now every time I turn it off nad on / or just reboot, it updates touch panel firware.. luckily successfully... but every time.. I use last official SW version (V12.16.5.126 ).
Click to expand...
Click to collapse
really appreciate that its good to not to start new threads without any actual requirement
flash raw firmware once. you can get the firmware from following thread
https://forum.xda-developers.com/zenfone2/help/guide-bring-to-life-zenfone-2-ze500cl-t3503144

sukhwant717 said:
really appreciate that its good to not to start new threads without any actual requirement
flash raw firmware once. you can get the firmware from following thread
https://forum.xda-developers.com/zenfone2/help/guide-bring-to-life-zenfone-2-ze500cl-t3503144
Click to expand...
Click to collapse
it looks too much struggle, so if there is no other way then I leave it so. ( I have Win 10 and usb keyboard, so I can´t disable driver signatures ). Or can I flash this raw.zip in root folder like odher updates?

Mairo said:
it looks too much struggle, so if there is no other way then I leave it so. ( I have Win 10 and usb keyboard, so I can´t disable driver signatures ). Or can I flash this raw.zip in root folder like odher updates?
Click to expand...
Click to collapse
buddy that link was to get raw firmware only. you do not need to disable signature enforcement. just download rar firmware file and flash it with AFT. use the only section flash raw firmware. you need to install only asus usb driver

sukhwant717 said:
buddy that link was to get raw firmware only. you do not need to disable signature enforcement. just download rar firmware file and flash it with AFT. use the only section flash raw firmware. you need to install only asus usb driver
Click to expand...
Click to collapse
impossible to find proper step by step AFT using guide, 1. like do in need first unlock bootloader? 2. when I boot (power + vol up) fastboot mode then AFT dont find phone and "fastboot cmd waiting" .. . is in red, everywhere I can see users have blue text there. 3. do in need activate USB debuging?
Flashing is not something unknown for me , I have using 3 years Nexus 5 and still using it, but flashing asus devices is unknown and strange.
I better leave this phone as it is. I hope user have extra 10 sec time to wait touch panel update on every boot.

Mairo said:
impossible to find proper step by step AFT using guide, 1. like do in need first unlock bootloader? 2. when I boot (power + vol up) fastboot mode then AFT dont find phone and "fastboot cmd waiting" .. . is in red, everywhere I can see users have blue text there. 3. do in need activate USB debuging?
Flashing is not something unknown for me , I have using 3 years Nexus 5 and still using it, but flashing asus devices is unknown and strange.
I better leave this phone as it is. I hope user have extra 10 sec time to wait touch panel update on every boot.
Click to expand...
Click to collapse
to use AFT all you need is device in fastboot mode. check if drivers are properly installed. which version of AFT you are using?

Xiaomi MI5S is dead after MIUI update?!

Hi everyone,
After last MIUI update, my MI5S (Global) is not responsive anymore. I tried all the combinations of power and volume buttons, but the screen remains black.
The only answer I got is an error after running MiFlash :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, summing up:
1) Doesn't startup on pressing power button.
2) Phone doesn't start in recovery mode.
3) Phone doesn't enter fastboot mode ( power + volume down).
4) No notification led showing battery charging status.
Best regards,
Tiago

tbmm said:
Hi everyone,
After last MIUI update, my MI5S (Global) is not responsive anymore. I tried all the combinations of power and volume buttons, but the screen remains black.
The only answer I got is an error after running MiFlash :
So, summing up:
1) Doesn't startup on pressing power button.
2) Phone doesn't start in recovery mode.
3) Phone doesn't enter fastboot mode ( power + volume down).
4) No notification led showing battery charging status.
Best regards,
Tiago
Click to expand...
Click to collapse
Find any Linux PC, install adb on it and install recovery through fastboot mode ( Mi bunny on phone, fastboot command in console ).

Hi BlackJetCat,
The thing is, I cannot see any bunny on the phone because the screen is always black and besides that, I'm getting the message ""waiting for device" after executing "fastboot boot recovery.img".
I don't know if I'm doing something wrong.
Thanks for your help.

Wow, you don't see anything on screen? Try to press Vol- + Power for until you see FASTBOOT text and picture. If not helped, try to find any unbricking instruction for SD821. Also you can turn off and on battery [only by taking off back cover]. Maybe your problem related to screen or power controller.
sorry for bad english, this is my 3rd language

Maybe you can try "deep flash", search on web about it, it needs a simple cable to flash. Search deep flash for mi5s.

BlackJetCat said:
Wow, you don't see anything on screen? Try to press Vol- + Power for until you see FASTBOOT text and picture. If not helped, try to find any unbricking instruction for SD821. Also you can turn off and on battery [only by taking off back cover]. Maybe your problem related to screen or power controller.
sorry for bad english, this is my 3rd language
Click to expand...
Click to collapse
I cannot see anything on the screen. I already searched for some unbricking solutions, but without success. I was able to flash the phone using Mi Flash, but nothing more. Mi Flash is the only place where the phone is detected.
Creative9170 said:
Maybe you can try "deep flash", search on web about it, it needs a simple cable to flash. Search deep flash for mi5s.
Click to expand...
Click to collapse
I didn't try deep flash or removing the battery. Do you know if that would void the warranty?
Thanks for your help.

tbmm said:
I cannot see anything on the screen. I already searched for some unbricking solutions, but without success. I was able to flash the phone using Mi Flash, but nothing more. Mi Flash is the only place where the phone is detected.
I didn't try deep flash or removing the battery. Do you know if that would void the warranty?
Thanks for your help.
Click to expand...
Click to collapse
It doesn't need opening the phone, you just need to make a simple cable or buy it and flash device with Xiaomi Flash tool.
Here is a guide: https://forum.xda-developers.com/mi-5s/how-to/guide-flash-xiaomi-mi-5s-chinese-rom-to-t3530834
Update: I think it doesn't void warranty because its not kind of unlocking or opening the phone case.