Develop Bugs

[KERNEL]New Kernel 1.29-O/2.12-O [OOS-5.0.x/OOS-5.1.x][4.4.131]

Hello everyone. After some time for building Roms and kernels for the OnePlus One, now I am here for the OnePlus 5.
Some of you already know me for what I focus on my builds.
Functionality
Speed
Smoothness
Battery
Features:
Compiled by a custom toolchain from Google to ensure the best experience.
Schedulers available:
SIO
BFQ
ZEN
CFQ - Default
Deadline
NOOP
MAPLE
Extra TCP advanced algorithm:
Westwood - set as default
Reno
Cubic
Highspeed
HTCP
Vegas
Veno
lp
illinois
yeah
Sound Control - Sound and Microphone control
KCAL - Control colours on your display
Adreno Idler - (Battery saver without compromising performance)
Notification LED control
Sweep2sleep
To control features use kernel adiutor.
Patches from Google Kernel for 4.4 devices
Latest CAF patches LA.UM.6.4.r1-07600-8x98.0
Latest Linux patches 4.4.126
Optimized libraries
Crypto patches
Wakelock blocker to reduce battery drain due to the modules (does not affect functionality)
Upstream code for F2FS
Using noatime
Patches to improve battery life
Passes Safetynet
WireGuard
Upstream code android binder
Screen flickering fixes
Version to use:
2.xx-O - Oreo 8.1 - Recommended to use OB6
1.xx-O - Oreo 8.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download New Kernel ​
There are two branches:
Stable - which has all proven and tested development
Beta - new features introductions. Remember if your chip fries... It was done with good intentions, intended only for brave people.
To build this kernel I give a huge thank you to great dev @savoca has had a lot of patience and shared his knowledge to build a kernel with a step by step guide, as also explaining how each stuff works.
@andi79 for the introduction of the 64bit model kernel compilation.
All credits go to the OnePlus team.
Disclaimer: With the use of this kernel I am not responsible for any damage to the phone. It is at your own risk in case happens something wrong. I use this kernel daily and test it before release.
Source code
XDA:DevDB Information
[KERNEL]New Kernel for the OnePlus 5
Contributors
jgcaap
ROM OS Version: 8.0.0 oreo/8.1.0 oreo
Version Information
Status: Stable
Created 2017-12-10
Last Updated 2018-03-23
XDA:DevDB Information
New Kernel, Kernel for the OnePlus 5
Contributors
jgcaap
Source Code: [url]https://github.com/NewRom/android_kernel_oneplus_msm8998[/URL]
Kernel Special Features:
Version Information
Status: Stable
Created 2018-04-01
Last Updated 2018-04-01

Instructions:
1) If you come from another kernel (which is not stock) flash the boot.img of the stock version.
2) Flash the zip file.
Changelog:
v2.05-O
Updated toolchain compilation environment
v2.04-O
SELinux: removed switch option.
updated to Linux 4.4.125
adjusted swap kernel to 10%. It will be very hard to use this.
Added patches from Google related to
Merged new Oneplus patches
Upgraded to wifi LA.UM.6.4.r1-07400-8x98.0
ensure the kernel is compiled for LP64
Added patch to prevent regressions in the compressed kernel image.
Removed some debug options and unnecessary features.
v.2.03-O
Merged LA.UM.6.4.r1-07400-8x98.0
v.2.02-O
Merged linux v4.4.123 patches
v.2.01-O
Reverted some of the code from the last rebase.
v2.00-O
Rebase kernel from oneplus 8.1 sources.
There was added alot of patches for cfq.
Removed some schedulers.
Added wireguard.
Applied changed which use less cpu.
Added display options to provide power savings.
Added display dimmer option.
Added kcal back.
Removed fifo, so, vr schedulers.
v.1.29-O
Rebased current kernel commits as it is with 8.1 sources.
v.1.28-O
More upstream fixes by Google.
v.1.27-O
Screen flickering fixes (was finding this really annoying)
CPU jumping randomly fixed ( more battery)
Upstream code for android binder with loads of fixes from Google
v.1.26-O
Merged CAF patches LA.UM.6.4.r1-06900-8x98.0
v.1.25-O
Merged Linux patches 4.4.120
v.1.24-O
Merged Linux patches 4.4.119
v.1.23-O
Synced with Oneplus changes.
v.1.22-O
Added wireguard back.
v.1.21-O
Merged Linux patches 4.4.118.
Disabled wireguard
v.1.20-O
Merged Linux patches 4.4.117.
v.1.19-O
Updated toolchain
v.1.18-O
Rebased and merged Linux patches 4.4.116.
Ext4 fixes
CPU interactive fixes
Merge tag 'LA.UM.6.4.r1-06500-8x98.0'
Changed some configurations for WiFi.
Lowered min frequency to 300mhz (less heat).
v.1.17-O
Merged Linux patches 4.4.115.
v1.16-O
Merged Linux patches 4.4.114.
v1.15-O
Synced with new oreo beta
Added cpu patch
Added crypto
v1.14-O
Merged Linux. Patches 4.4.113
Updated WiFi from caf drivers
Merge caf LA.UM.6.4.r1-06100-8x98.0
v1.13-O
Compiled with custom toolchain
v1.12-O
Merged Linux patches 4.4.112
v1.11-O
Synced with beta 2 for op5t
v1.10-O
Added Linux patches until 4.4.111
Disabled some debug
Changed binary Wi-Fi to a custom one built by caf
Compiled with google toolchain

Troubleshooting :
No wifi or broken hotspot.
Solution: You probably come from another kernel, please reflash rom, then flash kernel.
Battery drain:
This rom has a bug in the wifi. Please go to advanced settings and turn off scanning always available.
On status appears kernel 4.4.21
Since there is a requirement to the kernel say that is version 4.4.21-perf+ for wifi to work then I named the kernel 4.4.21-perf+. This until I check wifi driver source.

Thanks for making the dedicated thread

Veliion said:
Thanks for making the dedicated thread
Click to expand...
Click to collapse
Welcome, and enjoy.

I'm on OOS 5.0.4 which is on android version 8.0.0. Is newKernel-OOS-1.29-O.zip the latest version that i should use? Or some other. Please help

wow. new kernel . gonna try .

sleepwalking0593 said:
I'm on OOS 5.0.4 which is on android version 8.0.0. Is newKernel-OOS-1.29-O.zip the latest version that i should use? Or some other. Please help
Click to expand...
Click to collapse
Correct.

Can you add tripndroid and Alucard?

Download and ready to flash. Thx for your work.

Thanks for op5 thread

Does it support for RR?

Glad to see you in op5 forum, I'm following you since the good old bacon times

h.castle said:
Does it support for RR?
Click to expand...
Click to collapse
Only on OOS ROMs. It doesn't support custom ROMs currently

New kernel online with latest Linux patches 4.4.127

I have installed this version newKernel-OOS-2.07-O.zip on open beta 8 on my Oneplus 5 but during flash it shows oneplus 5t .Is it good to go or i should wipe my phone ???

Aarju said:
I have installed this version newKernel-OOS-2.07-O.zip on open beta 8 on my Oneplus 5 but during flash it shows oneplus 5t .Is it good to go or i should wipe my phone ???
Click to expand...
Click to collapse
It is fine.. Just a message kernel are unified.

jgcaap said:
It is fine.. Just a message kernel are unified.
Click to expand...
Click to collapse
Thanks developer

2.07 work veey well. Thx dev.

How to update kernel??

[KERNEL][3.18.133] KernelX Project [Gemini][2019/02/03]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ABOUT:
This is my personal kernel project, which I looked to be a stable kernel for daily usage, with useful features only, and to have a half term under performance and battery life for Xiaomi msm8996 devices. Inspired by projects like Flash Kernel and ElementalX Kernel
"While I am not a super star kernel developer, I do know my way around it." (Chancellor, Nathan - 2017) ​
PROJECT GOALS:
Keep kernel up-to-date with lastest stable Linux Kernel version (3.18.123)
Offer the user the best balance between battery life and performance
Just useful features. Features may be included only as needed (Read FAQ section to know the features that I won't add in anyway)
FEATURES:
Here are the major features of the kernel (More details on the Github repo)
Up-to-date with the latest stable Linux Kernel version (3.18.133)
Mainline Linux patches for CFQ
Several subsystems converted to use power efficient workqueues
Hides bootloader unlock from SafetyNet (can still fail through other means)
Available to flash with AnyKernel2 (thanks to @osm0sis)
Users facing features:
KCAL color control
USB Fastcharge
Adreno Idler
Boeffla Wakelock Blocker
INSTALLATION:
Boot to recovery
Flash kernel zip
Reboot
Yay! You've installed the kernel :victory:
DOWNLOADS: https://sourceforge.net/projects/kernelx-project/files/
Telegram Channel: https://t.me/KernelXChannel
Liked my work? Make a donation : http://bit.ly/hlcpereira_paypal
F.A.Q:
Q: Are you Planning to support MIUI?
1. A: No.
Q: Could you include feature x,y and z in your kernel please?
2. A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I won't promise that I will merge every request but I will always take it into consideration. I will NOT add:
Overclock or underclock of the CPU and GPU (Except for the cases that the device has a underclock on both or in just one, then it'll be considered)
Undervolt
Any other governors except the "kernel stock" ones
Any feature that just one or two people is going to use
Q: I'm having an issue, can you help me?
3. A: I'm not an amazing kernel developer but I will certainly try my best. First, start by reading the release posts, as I may make note of a particular issue. Also search the thread to see if I have discussed it before. If you see nothing, please provide me with a dmesg/last_kmsg and logcat, your ROM/kernel version, and a detailed description of the issue. If I can't reproduce reliably, I'm not going to fix the issue. (Extracted from Nathan Chancellor's Flash Kernel Thread)
Q: The kernel is f*cking up my battery! Plz...
4. A: Stop right there. The Kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone. If verified the clocks are always online and on the max clock, then it'll checked out what's happen. Anyway logs are necessary.
THANKS TO:
@nathanchance
@flar2
@franciscofranco
@LuK1337 and Mi5Devs
@xNombre
Any other developer that I might forgot
ADDITIONAL NOTES:
ABOUT KERNEL USAGE IN OTHER ROMS THAT ARE NOT MINE:
You are free to use the kernel if you want. The only thing that I'll request to do it's to keep the kernel name. If you have modified something, just add a "-Mod" in the final of the kernel name or anything that states that the kernel has been modified, not by me, but by ROM maintainer.
XDA:DevDB Information
KernelX, Kernel for the Xiaomi Mi 5
Contributors
Hlcpereira
Source Code: https://github.com/Hlcpereira/kernel_xiaomi_msm8996
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-09-17
Created 2018-09-18
Last Updated 2019-02-03

Reserved #1

Reserved #2

Interesting! Finally a kernel that focuses on stability and battery life.
I'm hoping for some good releases, good work!

Is it a EAS or HMP kernel?

Shicheng Zhou said:
Is it a EAS or HMP kernel?
Click to expand...
Click to collapse
As stated on thread title, it's HMP. I'm planning to do an EAS version soon.

Does It work over Nougat? Thanks.

Is this kernel has the pie support, as pie caf tag integrated

DLG32 said:
Does It work over Nougat? Thanks.
Click to expand...
Click to collapse
learn to read carefully

drpraveen said:
Is this kernel has the pie support, as pie caf tag integrated
Click to expand...
Click to collapse
It's working on Pie ROMs as for now, but with the rebase of all stuff for Pie, the version for Pie and Oreo will be separated from one and other soon.

Kernel Update!
Just a little update with upstreamed kernel version (3.18.122)
Link on OP.

Hlcpereira said:
Kernel Update!
Just a little update with upstreamed kernel version (3.18.122)
Link on OP.
Click to expand...
Click to collapse
Thank you for your work and update , its seems your kernel is very good

Kernel Update!
- Upstreamed to 3.18.123
- Merged LA.UM.6.6.r1-09800-89xx.0 tag
- Included Adreno Idler
- Enabled Westwood TCP
Also released EAS version.
Download link: https://sourceforge.net/projects/kernelx-project/files/gemini

Hay anyone flashed in on PIE? My wife using semi gsi pie

fuxmen said:
Hay anyone flashed in on PIE? My wife using semi gsi pie
Click to expand...
Click to collapse
Flashed on ArrowsOS - HMP Pie. Stable, but some lagging not sure if ROM or Kernel or both combo not good. At least Touchboost and CPU boost helped.

fuxmen said:
Hay anyone flashed in on PIE? My wife using semi gsi pie
Click to expand...
Click to collapse
@Jonas Cardoso have tested on LOS 16.0 both HMP and EAS. All them booted and seems to be fine.

Will we have this kernel to official PE rom?

chandonmiaxda said:
Will we have this kernel to official PE rom?
Click to expand...
Click to collapse
Yep

Will it works with xiaomi.eu global rom?

First FAQ...
GGelmi

[KERNEL][10.0] Simple kernel r2.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Why simple kernel?
- The simple kernel is a highly optimized aftermarket kernel for the Xiaomi Snapdragon 845 series of devices. This includes the Mi 8, Mi Mix 2s, and Poco F1.
- Also, the kernel receives at minimum monthly updates, sometimes even weekly, and is thoroughly tested by myself and a select group of individuals who also contribute to the project.
Features :
- Based on latest android 10 caf tag
- Google common for Q merged
- F2fs stable merged
- Rapid GC for f2fs
- PELT (per entity load tracking) backported from Android-Mainline
- RCU (read copy update) backported from Android-Mainline
- Vnswap and Zswap
- Highly optimized memory allocation
- Boeffla wakelock blocker
- Highly optimized deep sleep and idle drain (usually 0% overnight)
- Sound control
- Latest drivers and update source from mi-opensource
- Compiled with Clang 10.0.0 and LLVM polyhedral loop optimization
How to install and compatability:
- This kernel only supports android Q aosp roms
- Flash zip in a recovery of your choice (twrp is recommended)
- Flash magisk (optional)
- Reboot and experience the simplicity
If you appreciate my work and want to help me stay awake click here to buy me a coffee
Downloads:
https://github.com/ethan-halsall/Simple-Kernel/releases
XDA:DevDB Information
[KERNEL][10.0] Simple kernel, Kernel for the Xiaomi Mi 8
Contributors
oipr
Source Code: https://github.com/ethan-halsall/Simple-Kernel
Kernel Special Features:
Version Information
Status: Stable
Created 2019-02-08
Last Updated 2020-06-24

Reserved
Simple Kernel Ten r2.0-
Changelog:
- Upstream to 4.9.228
- Upstreamed f2fs
- Enabled Vnswap and Zswap for less overhead and better page swapping
- Disable Zram
- Merged LE.UM.2.3.2-10400-SDX24 and LA.UM.8.3.r1-07900-sdm845.0
- Decreased swappiness to 20 - for optimum swapping
- Wireless / db.txt: Checkout to upstream wireless-regdb
- Updated Simple LMK
- Inlined scheduler further with android-mainline
- Fixed Ion allocation bug (causing Gcam crash)
- Disabled readahead for faster app opening and less overhead
Download: https://github.com/ethan-halsall/Simple-Kernel/releases
If you appreciate my work and want to support me click here https://www.paypal.me/ethanhalsall

Another challenge ! Great

Great stuff Ethan

does it support f2fs file system?

Could someone test dt2w?

This kernel work on MIUI 10 ?

Wow this ROM very good like god :good:
God job bro

Does it support f2fs file system?

WizardYu said:
Does it support f2fs file system?
Click to expand...
Click to collapse
Test and tell

Rommco05 said:
You mean Simple? It is kernel not rom. MIUI or LineageOS are roms
Click to expand...
Click to collapse
Yes sorry i mean kernel not ROM hahahah

oipr said:
Test and tell
Click to expand...
Click to collapse
okay?

Can you add full support for DriveDroid?

Face unlock doesnt work on miui eu.

Is it possible to set the 'CPU frec min' to 300MHz?

Thanks for ur work bro, it's the only kernel that works ok with me.

Amazing battery life

Can I just install it on top of my current ROM? Is there any risk of losing data?

shaynl said:
Can I just install it on top of my current ROM? Is there any risk of losing data?
Click to expand...
Click to collapse
Yes. No but you can backup your boot partition before you flash it.

harris123424 said:
Face unlock doesnt work on miui eu.
Click to expand...
Click to collapse
No issues with face unlock here.
Tested Xiaomi.eu weekly 9.2.21 with simple kernel 2.4 and Xiaomi.eu weekly 9.3.1 with simple kernel 2.5

[ROM][UNOFFICIAL][EXPERIMENTAL] Mokee Open Source Project [9.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MoKee Open Source Project
https://www.mokeedev.com/
An Open Source ROM based on AOSP, It provides you a smooth and lag free experience on your device. It makes your device perform snappier and thus helps you to handle your device with ease.​
Types of ROMS
RELEASE: Tested after integrating new features, more stable than NIGHTLY. (Odexed builds)
NIGHTLY: Built daily with newest code and experimental features, might contain undiscovered bugs. (Deodexded builds)
HISTORY: Final odexded builds once a newer Android version is out and being built.
EXPERIMENTAL: Released when a new device is added or when a new feature is added for public beta testing and feedback. (Deodexded builds)
UNOFFICIAL: Maintained separately by individual developers, usually involves modification of shared code which cannot be merged (affects other devices), therefore maintained by the developer himself.
Note: We(The MOSP Team) always test the shared code for bugs, however sometimes we may not be able to detect device specific bugs. If you have such issues, it will be better to report to the device maintainer.
How To Flash:
Boot to TWRP
Full Wipe
Copy Rom and GAPPS to internal Storage
Flash ROM
Flash GAPPS
Reboot
Download here :
TWRP 3.3.0 : https://drive.google.com/file/d/1aOmvlS9dHqDfY2-RHyreK0-OsrxeLmXE/view?usp=sharing
ROM : https://sourceforge.net/projects/ng...0-X00T-201905120649-EXPERIMENTAL.zip/download
GAPPS: https://opengapps.org/​
Credits:
Mokee Open Source Project : https://github.com/MoKee
XDAevDB Information
Mokee, ROM for the Asus ZenFone Max Pro M1
Contributors :
@nguyenhung9x , @krasCGQ , @SagarMakhar , @Shivam Kumar Jha , @Subinsmani , @kylothow , @travarilo , @kubersharma001 ,,,... and some dev I don't remember name
Source Code: https://github.com/Zentalk-VN/kernel_asus_sdm660
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 16.2017.1903.050
Based On: LineageOS
Version Information
Status: Stable
Created 2019-05-02
Last Updated 2019-05-14

Changelog : 12/05/2019
Code:
Device:
+ Build sepolicy initial for pie
+ Improve padding on statusbar as well as lockscreen
+ Overlay:enable smart clock
+ Enable VoLTE for Airtel/Vodafone India
+ Enlarge sched_small_wakee_task_load value for sdm660
+ Best audio , dirac
+ Overlay: Enable Wi-Fi MAC randomization
+ Wifi: enable QPower and Deep sleep at the same time
+ Enable touch optimizations
+ Update radio, IMS blob from stock pie
+ Update vendor security patch to 2019-03-01
+ Update graphics, postprocessing blobs from stock pie
+ and more update from commit on github : https://github.com/Zentalk-VN/device_asus_X00T
Kernel:
+ Merge branch 'lineage-16.0' of https://github.com/KudProject/kernel_asus_sdm660 into pie
+ darkonah_defconfig: Enable compat vDSO
+ Build clang version : 9.0.3

nguyenhung9x said:
Changelog : 12/05/2019
Click to expand...
Click to collapse
Coolll, from VN with love ))))

finally what is waiting for has arrived :victory:

Screenshots??
Any way you can add Google Drive mirror link?? Downloads too slow for me...

Does gpay officially work or only through the root? Only on AEX it worked and after the update it also stopped (without root)

YouTube Videos are lagging as hell...plus no audio....!!

jesh1 said:
YouTube Videos are lagging as hell...plus no audio....!!
Click to expand...
Click to collapse
I will fix soon

Changelog : 14/05/2019
Code:
Device
- Audio : Fix YouTube Videos are lagging as hell...plus no audio …
- Remove nfc from device tree
- rootdir: Don't re-start hwcomposer if sf restart
- Move back to HIDL variant and pin ANT+ and BT stack from lavender.
- Import Soter blobs from stock
- Build libsensorndkbridge from source
- Import stock media_profiles_vendor.xml as media_profiles_V1_0.xml
- Wifi Add hostapd configs from stock
- Remove doze
- ... and some fix minor
Kernel
- Merged with latest darkonahX (Merge from @travarilo)
- Fixed deep sleep issue
- Fixed some network issues

thank you, keep maintaining sir

nguyenhung9x said:
Changelog : 14/05/2019
Click to expand...
Click to collapse
Hope it is good now...will review it soon?
Edit:- Everything is fine...Found the deep sleep issue; sloved it by changing kernel..Audio output is below average otherwise the rom is smooth and snappy

Changelog 15/05/2019
Code:
- Revert all merge from kernel (Fix auto poweroff , deepleep)
- Build custom Telephony

And what changes are from 19.05? Does safety build work for banking applications? For example, gpay, without root. Aex can do assemblies, maybe I would try if gpay could be tied to mokee, it's important for me.

Thank you for bringing one of the first rom I ever flashed

Do not put this core, the phone turns off on all the firmware with it, and the firmware is good, sound and smooth, but it is very important to attach gpay, in this firmware it is impossible, if you manage to do this, many people with 4pdа will install, since there important!
The phone does not go out of the lock mode, even when changing any kernel, tested several times!

what changes from 23.05?

Changelog 23/05/2019
Code:
- Merge tag , Upstream kernel , Improved kernel stability , Fixed deep sleep issue
- Show battery icon in the QS header
- Support overclock power profile
- Support for EAS kernel
- Fix offline charging battery stats
- Disable VSync for CPU rendered apps
- ... some minor fix author

nguyenhung9x said:
Changelog 23/05/2019
Code:
- Merge tag , Upstream kernel , Improved kernel stability , Fixed deep sleep issue
- Show battery icon in the QS header
- Support overclock power profile
- Support for EAS kernel
- Fix offline charging battery stats
- Disable VSync for CPU rendered apps
- ... some minor fix author
Click to expand...
Click to collapse
You do not know Mokee will go to the official firmware for m1 pro?

the phone is turned off + no nfc settings

[ROM][Official][10.0][X00TD] Pixel Experience Plus Edition [AOSP][2020/10/10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience Plus Edition for DeviceName [X00TD]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog​
Android OS version: 10.0.0_r37
Security patch level: June 2020
Build author/Device Maintainer: Alex_mercer09
Device Source code: Device Tree
Kernel Source code: Kernel Source
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
If you like my work: [email protected]
​
XDA:DevDB Information
Pixel Experience Plus, ROM for the Asus ZenFone Max Pro M1
Contributors
Alex_mercer09, travarilo, babluS
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: firmware v059
Version Information
Status: Stable
Current Stable Version: 10.0
Stable Release Date: 2020-10-10
Created 2020-03-13
Last Updated 2020-10-10

Reserved
Update: 13/03/20
Code:
Changelog for Plus edition 13/03/2020
-Initial Build
-March Security Patch
-Pe Plus Source features
-Improved Speaker Audio
-Some Device tree improvements
-wfd/cast/DRM L1 etc works fine!
Thanks to @travarilo for trees and help!

Permissive or forced Selinux?

dougluna said:
Permissive or forced Selinux?
Click to expand...
Click to collapse
enforcing

good work sirji

Any bugs in this rom for any users

Are you official maintainer of the rom as i have seen your name and link to this post on official pixel experience website? @Alex_mercer09

waited for some review.. i really need stable 10 rom for this device

Can I flash it on official pe10 without losing apps and all??

Just try this rom and mobile banking didnt work, i try magisk hide but no work too
I am curious why lot of new android 10 cant pass some of mobile banking app while rootless... In my test, only nitrogen rom and stagOS rom can pass it

Numb_nut_deathstroke said:
Can I flash it on official pe10 without losing apps and all??
Click to expand...
Click to collapse
no, clean flash recommended

Update: 18/03/20
Code:
Changelog for Plus edition 18/03/2020
- Added Fingerprint blobs from stock Q
- Added perf blobs from Stock Q
- switched to thermal 2.0
- Screen dpi now default 420
- zram improvements
- added QS padding similar to bablu's build
- cts passes without magisk
- kernel upstream to .216
- Various Device tree improvements
Link in OP!

Alex_mercer09 said:
Update: 18/03/20
Code:
Changelog for Plus edition 18/03/2020
- Added Fingerprint blobs from stock Q
- Added perf blobs from Stock Q
- switched to thermal 2.0
- Screen dpi now default 420
- zram improvements
- added QS padding similar to bablu's build
- cts passes without magisk
- kernel upstream to .216
- Various Device tree improvements
Link in OP!
Click to expand...
Click to collapse
Dirty flash or must clean flash?

[Update] new build with FP chnges reverted (as reported by some)
Those who have issue may update from like below , if no issue stay on this build
Rest of the Changelog same as 18/03/2020 update
Download

putrazperdana said:
Dirty flash or must clean flash?
Click to expand...
Click to collapse
try dirty flash if you want, but if any issue do clean

Why some apps telling me the device is rooted?
Then I check via Root Checker, it is not.
Well actually I have not rooted my device.
Why is it?
I am using the latest build, clean flash.

blood1995 said:
Why some apps telling me the device is rooted?
Then I check via Root Checker, it is not.
Well actually I have not rooted my device.
Why is it?
I am using the latest build, clean flash.
Click to expand...
Click to collapse
Bootloader unlocked = Device shown as compromised
You need to flash magisk

Update 21/03/2020
Code:
Changelog for 21/03/2020
- Fixed hotspot
- Min Brightness level lowered
- kernel Upstream to 4.4.217
Download Link updated in OP!

There are some bugs I would like you to know about..
Bug where I can't turn off At a Glance at top of home screen.
Bug where wi-fi calling not working.
Bug where settings opens slowly and at some time it just won't open (although happened only once)
Bug where hotspot isn't working properly (can't use data, showing no internet on other devices when I connect it to them)
And one last thing camera is so bad in this version only pro mode working fine)
That's all I can say for now..

sai143420 said:
Any bugs in this rom for any users
Click to expand...
Click to collapse
No fingerprint Reader