Develop Bugs

[ROM][7.1.2_r17] LineageOS OMS [substratum][athene]

LIneageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), re-branded CyanogenMod, which is designed to increase performance and reliability over stock Android for your device. However, the ROM here will have full Substratum Support
Code:
#include <disclaimer.h>
using xdarules std;
/*
* Your warranty was void as soon as you unlocked your phone.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation
Unlock bootloader if not already done.
Flash TWRP Custom Recovery via fastboot.
Boot into Recovery Mode. (Custom Recovery Environment needed)
Make apt backups.
Wipe System, Data, Cache and ART Cache.
Flash the ROM zip.
Flash the GApps zip.
Reboot to System.
NON-ROOTED. Why?
Simply because some people want MagiskSU and some want SuperSU while some don't want root at all.
Downloads/links
TWRP: Latest 3.1.0-1 by @oadam11 is recommended (It's the best for me)
https://forum.xda-developers.com/showpost.php?p=70939009&postcount=2
Official TWRP should also probably work.
ROM: Google Drive Folder
Open GApps: XDA Thread
Beans GApps: XDA Thread
Magisk: Magisk SuperSU: SuperSU
Bugs:
Chop Chop gesture for Flashlight, Double Twist Gesture for Camera and Flashlight Toggle on Quick Settings won't work on first boot, reboot after setting up the device; it will work fine :good:
Special Thanks:
Google powered AOSP Project
LineageOS Official Project
@vache @rahulsnair @ Shreps and other maintainers for bringing LineageOS and other ROMs for athene.
@Silesh.Nair @double_facepalm and @Rkschunk for bearing with my noob questions
@oadam11 for TWRP.
@Chainfire for SuperSU and @topjohnwu for Magisk.
@nicholaschum for Substratum.
@The Flash [email protected] for the repos and dependencies fix.
Sources:
Device Tree
Kernel Tree
Vendor Tree
XDA:DevDB Information
LineageOS - OMS [athene], ROM for the Moto G4 Plus
Contributors
///TheNexus///, tywinlannister7
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 7.0 93-14
Based On: LineageOS/CyanogenMod
Version Information
Status: Stable
Created 2017-04-29
Last Updated 2017-06-06

.
Deleted

Does this have ota?

tej12345 said:
Does this have ota?
Click to expand...
Click to collapse
No, but I will update every friday. You can flash dirty.

Make sure you link to the kernel you've used as per the GPL License.
Also, thanks for putting this together. I was thinking about doing it the other day as I build this for a friend whenever LineageOS/Substratum Team updates their sources. I think a lot of people will appreciate this

Jleeblanch said:
Make sure you link to the kernel you've used as per the GPL License.
Also, thanks for putting this together. I was thinking about doing it the other day as I build this for a friend whenever LineageOS/Substratum Team updates their sources. I think a lot of people will appreciate this
Click to expand...
Click to collapse
Thanks for warning. I added the sources which I used to build.

Is bluetooth file transfer working?

@Dan_Jacques I used the same device tree which is using for build official LineageOS so bugs are same with LineageOS. If it's working on LineageOS it's working in this ROM too, if not it's not working then.

///TheNexus/// said:
@Dan_Jacques I used the same device tree which is using for build official LineageOS so bugs are same with LineageOS. If it's working on LineageOS it's working in this ROM too, if not it's not working then.
Click to expand...
Click to collapse
Thanks!
I'm flashing it in my gf's Moto G4, and I wanna obtain the optimal performance. So, I'm diving into the optimizations. It takes me to the next question: has LineageOS F2FS support?

@Dan_Jacques No. There isn't any ROM supporting f2fs.

tej12345 said:
Does this have ota?
Click to expand...
Click to collapse
Just so you know that's a goofy question to ask about every single rom who cares if it has OTA just look on the thread and check for yourself can't you download the ROM without the help of an OTA
Sent from my Moto G4 using Tapatalk

///TheNexus/// said:
Thanks for warning. I added the sources which I used to build.
Click to expand...
Click to collapse
Can you pm your room service file for athene plz

Isn't the themeservice_app.te under sepolicy (CMTE probably) in the device tree conflicting with Substratum's Sepolicy? I was making a similar build and this thing was creating problems ?

@tywinlannister7 I removed the themesevice_app.te under device/athene/sepolicy and replaced CMActions to gestures.

ROM is updated! You can download at AFH Folder
My device tree: BurakTheNexusDede/android_device_motorola_athene
I'm planning to update this ROM nightly.

Is there still a camera issue ?

@joeeboogz Camera is working perfectly. I'm using the camera which is coming in ROM itself. No video or camera issue.

///TheNexus/// said:
@joeeboogz Camera is working perfectly. I'm using the camera which is coming in ROM itself. No video or camera issue.[/QUOTno camera is installed with ROM I'm looking all over
Click to expand...
Click to collapse

joeeboogz said:
///TheNexus/// said:
@joeeboogz Camera is working perfectly. I'm using the camera which is coming in ROM itself. No video or camera issue.[/QUOTno camera is installed with ROM I'm looking all over
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Uuuggghhhh

[ROM][Official][Treble] LineageOS 15.1 for Xiaomi Mi Note 3

LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 15.1 builds for Xiaomi Mi Note 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
You need at least MIUI10 CN stable firmware, otherwise you'll get error 7 when installing the zip.
Installation:
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Latest official TWRP is highly recommended: https://twrp.me/xiaomi/xiaomiminote3.html)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/jason
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Mi Note 3
Contributors
dianlujitao
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Nightly
Created 2018-09-08
Last Updated 2018-10-15

Changelog
2018/09/08:
Initial release
2018/09/09:
Fixed bootloop after secure boot enabled
Experimental Project Treble support
2018/09/21:
Increase volume
Fixed CDMA data connection
MIUI power off charging animation
SELinux works in enforcing mode now
Fixed wired headset buttons
Other minor bug fixes
2018/09/26:
Fixed IR not working with last build
Fixed AGPS
New experimental kernel
Other minor bug fixes
2018/10/02:
Fixed quick charging issue with last build
Speaker tuning
Later:
https://download.lineageos.org/jason/changes/

Great. Thanks Dev!

As always +rep

Thanks??

Thanks for your work. I hope that will become official asap.

Wow!!! Thanks for your work.
Now I've a Xiaomi.eu ROM, MIUI 10 beta. I've 3 questions..
Need flash some firmware?
I can flash Opengapp?
Gcam whit camera2 API work?
Thanks

good work!
干得漂亮！

TheSim81 said:
Wow!!! Thanks for your work.
Now I've a Xiaomi.eu ROM, MIUI 10 beta. I've 3 questions..
Need flash some firmware?
I can flash Opengapp?
Gcam whit camera2 API work?
Thanks
Click to expand...
Click to collapse
First Yes you need to flash Miui10 if you dont have that ( now you have )
Then you can flash Opengapps but better that install pico
About Gcam i dont know wait for test
Good Luck

You need at least MIUI10 CN stable firmware, otherwise you'll get error 7 when installing the zip.
Click to expand...
Click to collapse
But MIUI10 CN stable firmware have not been released, I can not find it in here : http://www.miui.com/thread-16463412-1-1.html

something happen if I use the Xiaomi.eu ROM instead of the official one? If i remember well are based in China Stable and Developer

电大终于发包了，昨晚就刷好了流畅省电基本无BUG，就提交一点，好像自带的文件管理器不能点APK安装东西，包括用浏览器下载酷安，下载好了点通知栏安装酷安什么反应都没有，最后还是adb命令安装上去的，对了我没有稳定版的MIUI10的包，我是开发版，一样可以刷

Great!

after setted screen lock password and bootup password, can not bootup.

w.o.w. !!

OMG Great things are happening :victory:

Thanks for your work!

Minor bug: music keeps playing when headphones being unplugged.

Have anyone tested Gcam???

Dark.Arrow said:
Have anyone tested Gcam???
Click to expand...
Click to collapse
Yes its Working...

[ROM][UNOFFICIAL] LineageOS 16.0 for Nexus 5

LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known bugs:
Tell me
Download:
Last unofficial: Here
As 07/19 u have to resize, check Here
Telegram Group: Here
XDA:DevDB Information
hammerhead-los16, ROM for the Google Nexus 5
Contributors
EnesSastim, aleasto, jprimero15, razorloves, sb6596
Source Code: github.com/nexus5oof
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Beta
Created 2019-04-13
Last Updated 2019-07-19

Nice, thank you very much! I will test it tonight and report back...
Hey @EnesSastim, are you sure the arm64 is the right addonsu for nexus 5 ?
I'll try addonsu-16.0-arm-signed.zip from https://download.lineageos.org/extras, lets see
Cheers
Blade
Report:
1) Installs fine in dual-boot setup using efidroid and TWRP 3.2.3.0
2) clear cache after install!! (otherwise forceclosing apps)
3) boot and setup is fine.
addonsu16arm->bootloops

Awesome!
Keep up the good work

Oof

BIade said:
addonsu16arm->bootloops
Click to expand...
Click to collapse
Dont even bother with that, i didnt even know i added it to the thread lol, use Magisk 19.0

EnesSastim said:
Dont even bother with that, i didnt even know i added it to the thread lol, use Magisk 19.0
Click to expand...
Click to collapse
yup thats the plan ^^
Some Screenshots

Btw i created a group on Telegram, link: https://t.me/nexus5chat

Better late than never. Trying it out now. Thanks @EnesSastim!

@EnesSastim! finaly ! Thank you for this surprise.

We are grateful.

Dirty flashed over 15.1 and everything seems OK. Teşekkürler Enes ?

Hi. Can i dirty flash from android 7.1.2 ? It has been so long didnt play with the rom

Thank you for the Rom.
Anyone can tell How is Battery life and Performance of this Rom and known Bugs ?

i can't flash gapps, how can i do it?

? happy flashing Hammy.

error 1 when installing gapps

does it support f2fs?
also, those icons from the notification drawers are green
how to change them to blue?
thx for your great work!

Enes hi, AOSP , LineageOs, Evolution X... Which one to choose dude? It says official on AOSP but on website of AOSP I couldn't find official link for hammy... I will try one of your builds asap, thanks for your great effort... ( Bu arada Türk sün galiba, ayrıca gurur duydum dostum [emoji1250][emoji1250][emoji1250] )
Nexus 5 cihazımdan Tapatalk kullanılarak gönderildi

I have a problem with gapps, error 70, not enough storage, but i use pico package and i unistalled a lot of apps of my system and is impossible to install gapps.

[ROM][12?][OnePlus 5] AOSP for OnePlus 5 [25 SEPTEMBER 2021][AOSP Master][Experimental]

AOSP for OnePlus 5 - master branch​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
Introduction
This projects is based on the work from here:
https://forum.xda-developers.com/t/...-2021-locked-bootloader.4183691/post-83819489
The ROM is built from the AOSP master branch. Currently, the OS is referred as Android Tiramisu in the Settings page.
No repositories from AOSP are changed: no commit over AOSP is at the moment present on the sources for this ROM.
As for my Android 11 ROM, all the changes are provided in separate repositories (HALs, kernel): this allows to upgrade Android with minimal effort, potentially also for future major versions.
Most of the added repositories is provided by LineageOS or CAF, so thanks to them for those repos.
In particular, thanks to @T1mb3 for this: we worked together and a lot of ideas to get this working are his.
Changelog
See third post.
Download
Releases can be found on AndroidFileHost: here
Installation
Backup everything and remove PIN protection before installing this ROM.
The provided zip can be installed using the TWRP recovery: clear data while doing that.
The ROM expects the firmware from OOS 10.0.1: different firmwares are not tested.
No gapps are tested.
The provided recovery allows only flashing signed images: use TWRP if you need to flash GApps or different packages.
If you want to keep the TWRP flashed, flash the persist_twrp.zip provided here:
https://sourceforge.net/projects/aosponeplus/files/Misc/
And flash the TWRP image you prefer.
Sources
Manifest on github: https://github.com/robertoglxda/local_manifests/tree/aosp-master/gl (branch: aosp-master/gl)
Kernel on github: https://github.com/robertoglxda/kernel_oneplus_msm8998/tree/master/gl (branch master/gl)
Telegram discussion group here!
XDA:DevDB Information
AOSP Master for OnePlus 5, ROM for the OnePlus 5
Contributors
robertogl
Source Code: https://github.com/robertoglxda/local_manifests/tree/aosp-master/gl
ROM OS Version: Android 11? Android 12?
ROM Kernel: Linux 4.x
Version Information
Status: Experimental
Created 2021-03-07
Last Updated 2021-09-25

These are experimental Android builds.
Important: it appears that now AOSP Master formats the /data partition differently compared to previous Android versions.
This means that these builds will work with /data partitions formatted on Android 10 or Android 11, but Android 10 and Android 11 will not be able to boot with /data partitions formatted on these builds.
This also means that TWRP will not currently be able to mount /data if /data was formatted by this ROM.

Changelog
[25/09/2021] aosp_cheeseburger-ota-user-master-20210925.zip
Changelog:
Synced with Master at September 25th, 2021
User build, Enforcing SELinux
Disabled /data encryption
[07/03/2021] aosp_cheeseburger-ota-userdebug-master-20210307.zip
Changelog:
First release

Reserved

What's new in S? (for developers)
Support for Linux 4.4 is depreceated. This can be seen in system/bpf with these commits:
* 4.9 kernels must support eBPF (as of Android S)
* bpf is required for all devices running Android S
* bpf is always supported
This can be worked around by reverting some of these commits, or backporting BPF to the kernel. So far the depreciation of 4.4 hasn't caused other issues.

Added to the OnePlus 5 Index Thread here.

Nice, booted up. I couln't activate silky home nor Magisk, but that's expected from a DP. The rom itself performs nicely. I haven't expected that (or even an A12 ota image for OP5) that early.
Thanks!

robertogl said:
AOSP for OnePlus 5 - master branch​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
Introduction
This projects is based on the work from here:
https://forum.xda-developers.com/t/...-2021-locked-bootloader.4183691/post-83819489
The ROM is built from the AOSP master branch. Currently, the OS is referred as Android S but with API 30 (from Android 11)
No repositories from AOSP are changed: no commit over AOSP is at the moment present on the sources for this ROM.
This is experimental: it is a userdebug Android build with SELinux in permissive mode. This should not be used as daily ROM.
As for my Android 11 ROM, all the changes are provided in separate repositories (HALs, kernel): this allows to upgrade Android with minimal effort, potentially also for future major versions.
Most of the added repositories is provided by LineageOS or CAF, so thanks to them for those repos.
In particular, thanks to @T1mb3 for this: we worked together and a lot of ideas to get this working are his.
Hardware validated (working)
- Display, touch
- Wifi
- Bluetooth
- Volume slider
- RIL
- Vibration
- Front and back cameras
- Audio
Changelog
See third post.
Download
Releases can be found on AndroidFileHost: here
Installation
Backup everything and remove PIN protection before installing this ROM.
The provided zip can be installed using the TWRP recovery: clear data while doing that.
The ROM expects the firmware from OOS 10.0.1: different firmwares are not tested.
No gapps are tested.
The provided recovery allows only flashing signed images: use TWRP if you need to flash GApps or different packages.
If you want to keep the TWRP flashed, flash the persist_twrp.zip provided here:
https://sourceforge.net/projects/aosponeplus/files/Misc/
And flash the TWRP image you prefer.
Sources
Manifest on github: https://github.com/robertoglxda/local_manifests/tree/aosp-master/gl (branch: aosp-master/gl)
Kernel on github: https://github.com/robertoglxda/kernel_oneplus_msm8998/tree/master/gl (branch master/gl)
Telegram discussion group here!
XDA:DevDB Information
AOSP Master for OnePlus 5, ROM for the OnePlus 5
Contributors
robertogl
Source Code: https://github.com/robertoglxda/local_manifests/tree/aosp-master/gl
ROM OS Version: Android 11? Android 12?
ROM Kernel: Linux 4.x
Version Information
Status: Experimental
Created 2021-03-07
Last Updated 2021-03-07
Click to expand...
Click to collapse
With all due respect, but I don't think this rom is Android 12. The difference between Android master branch and all others is that master branch is the most stable one. Android 12 is not even beta, it's just a preview for developers. So, virtually, very few upcoming Android 12 features will be in Master branch.
Good experiment, though, and I am not criticizing your at all.

optimumpro said:
With all due respect, but I don't think this rom is Android 12. The difference between Android master branch and all others is that master branch is the most stable one. Android 12 is not even beta, it's just a preview for developers. So, virtually, very few upcoming Android 12 features will be in Master branch.
Good experiment, though, and I am not criticizing your at all.
Click to expand...
Click to collapse
Actually, the master branch is the less stable between the branches available from Google. Sometimes it does not even compile due to errors in the source code. ROMs usually are built based on some tag, that are usually stable.
Anyway, it is reported as 'Android S' on the source code, and the changes on master includes all the changes of the S preview source code. So I'm not sure if this is Android 12, but I'm not even sure this is Android 11

I flashed to my oneplus 5 everything ok, but the mobile data is not accessible.

Raja M Reddy said:
I flashed to my oneplus 5 everything ok, but the mobile data is not accessible.
Click to expand...
Click to collapse
Does this mean that you can enable mobile data, but 3G/4G do not work? Can you share the full logcat?

kudos @robertogl for your contributions to this community

I just uploaded a new experimental build. It could have some issues in certain conditions, but it's there.
Also added important information to the second post.
Enjoy!
Edit: maybe latest release is very broken, but I'll leave it available while I'm investigating some booting issues.
Edit2: 'fix' the booting issues disabling /data encryption, so note that now this ROM only boots with decrypted /data.

Anyone tested this rom on device decrypted with twrp recovery?

morfances said:
Anyone tested this rom on device decrypted with twrp recovery?
Click to expand...
Click to collapse
This release is a bit ancient, it is from March
There are already Android 12 builds, so I don't think anyone is actually using (or used in the last months) this...

[ROM][Official][Weekly] LineageOS 18.1 for Xiaomi Mi Note 3

LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for LineageOS 18.1 builds for Xiaomi Mi Note 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes an Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
Latest MIUI stable firmware is suggested.
Installation:
First time flashing LineageOS 18.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Latest official TWRP is highly recommended)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/jason

Thank you.

WOW !!!! THX !!!!!
p.s.
download link are only 17.1 version...
Dianlujitao can You check please ? Thanks again for the great job !

hi dianlujitao, the link lineage os 18.1 is missing, we appreciate your efforts.

is the lineage 18.1 original 'Messaging'(sms) apk support searching function?
can anybody tell me?

has anyone problems with location? it is not working on find my device and it works random on google maps
gapps issue?

cstn said:
is the lineage 18.1 original 'Messaging'(sms) apk support searching function?
can anybody tell me?
Click to expand...
Click to collapse
Nope.
Anyway, this ROM is pretty awesome, far better that LOS 17.1.
THank you dianlujitao for this update.

many thanks for your effort.
I met a weird problem. After flashed the new version LineageOS, I installed some app and try to restart. But I can't access my cellphone anymore and it automatic power off in the lock screen. Then I try to connect my cellphone with my laptop, boot become normal and I can access the OS. Later I disconnect usb cable again,they problem still happen again.
So I have to install 17.1 again. Anyone has same problem?

The recording app is missing the screen recording feature.

ez2imac said:
many thanks for your effort.
I met a weird problem. After flashed the new version LineageOS, I installed some app and try to restart. But I can't access my cellphone anymore and it automatic power off in the lock screen. Then I try to connect my cellphone with my laptop, boot become normal and I can access the OS. Later I disconnect usb cable again,they problem still happen again.
So I have to install 17.1 again. Anyone has same problem?
Click to expand...
Click to collapse
I had the same issue here, after I tried to restore from google backup - the screen went dark. Tried clean install as well - same result. Reinstalled 17.1 back for now as well.

thanks again ! now is it present the 18.1 version ! tomorrow I'll try...

@Limeoff @ez2imac did you flash latest china stable firmware before installing Rom zip?

zaqm said:
@Limeoff @ez2imac did you flash latest china stable firmware before installing Rom zip?
Click to expand...
Click to collapse
I installed latest developer firmware(20.6.18) from xiaomifirmwareupdater.com

ez2imac said:
I installed latest developer firmware(20.6.18) from xiaomifirmwareupdater.com
Click to expand...
Click to collapse
Flash latest china stable and check.

Hello. Greenify does not respond when I touch the settings in app. İ tried delete the app but it isnt work. Anyone have any ideas?

zaqm said:
Flash latest china stable and check.
Click to expand...
Click to collapse
Thanks for your suggestion.
I followed your idea to flash latest stable Chinese version and I didn't meet the problem immediately. After two day usage,I met the problem again.The wired thing is I have to connect cellphone with laptop,otherwise my cellphone would reboot endless.

ez2imac said:
Thanks for your suggestion.
I followed your idea to flash latest stable Chinese version and I didn't meet the problem immediately. After two day usage,I met the problem again.The wired thing is I have to connect cellphone with laptop,otherwise my cellphone would reboot endless.
Click to expand...
Click to collapse
That's strange, can you think of sth specific you did before you get the reboot?

Hallo, thanks for work. Is possible instal some banking apps? On 17.1 isn't possible.
Thanks.

In 18.1 ant+ missing, on 17.1 worked
On 17.1 it was required to give permissions to use ant+ hardware, but on 18.1 permissions greyed out. Is there any way to enable ant+?