Develop Bugs

10.0.5 boot.img?

Hey all! I'm trying to root my OnePlus 7t but I'm on 10.0.5 stock and I can't find a patched boot.img, or even a stock one to patch in Magisk. I'm on the global variant. If someone could point me in the right direction, that would be grand. I have already read mostly all the posts...

I have the US version which I think is also the global version. Here's my patched boot.img for 10.0.5
https://drive.google.com/file/d/12tZN5D7dmovIeqsx8sTF-B0z2gxA6LG8/view?usp=sharing
Here's the stock boot for 10.0.5 as well if you screw something up.
https://drive.google.com/file/d/1nS0hqVCyntXHjbTzOH7H8-b29-IlAOIt/view?usp=sharing
Don't ask why the file sizes are so different. It just gets smaller for some reason after patching it in magisk.

I just booted with an older one and flashed the latest magisk

Need 10.0.5 boot.img stock & magisk patched for indian varient
Hey .... Can you help me with the 10.0.5 boot.img , stock & magisk patched for indian varient HD1901 of 7t

ChongoDroid said:
I just booted with an older one and flashed the latest magisk
Click to expand...
Click to collapse
I had tried booting with 10.0.3 while on 10.0.5 , Did not turn out well .
Has anyone on 10.0.5 tried booting w/ the above 10.0.5 patched img ?

Stock and Magisk patched boot.img files for HD1905 7T update version 10.0.5:
dropbox.com/s/887ibs0yorxgs2v/boot.img?dl=0
dropbox.com/s/sxrayyjn562susu/magisk_patched.img?dl=0

SkippRunning said:
Stock and Magisk patched boot.img files for HD1905 7T update version 10.0.5:
dropbox.com/s/887ibs0yorxgs2v/boot.img?dl=0
dropbox.com/s/sxrayyjn562susu/magisk_patched.img?dl=0
Click to expand...
Click to collapse
Do I only need to flash the patched img or both ?
And do they need to be flashed to both A and B slots ?
Thanks for sharing

hightech316 said:
Do I only need to flash the patched img or both ?
And do they need to be flashed to both A and B slots ?
Thanks for sharing
Click to expand...
Click to collapse
I would try fastboot boot before you use fastboot flash just to make sure that the device will boot successfully with the images. You should only need to fastboot boot magisk_patched.img, then open Magisk Manager and install Magisk by choosing the direct install option in the list. You only need the steps I mentioned to have root, and if you flash it to A and B at once you can get stuck in a bootloop. I had that happen at one point from flashing both partitions, and I dont recommend trying it.

SkippRunning said:
I would try fastboot boot before you use fastboot flash just to make sure that the device will boot successfully with the images.
Click to expand...
Click to collapse
Thanks , this can save a headache !

hightech316 said:
Thanks , this can save a headache !
Click to expand...
Click to collapse
Ya, I tried every relevant boot image I could find in the forums, and the device didnt work properly with any of them. The only one that allowed the device to boot successfully caused the wifi and sounds to not work. So I downloaded the full update from OnePlus and extracted it to a folder, then used payload dumper to extract all of the individual images out of the payload.bin file from OnePlus. I copied the boot.img into the phone storage and installed Magisk Manager, then patched the stock boot.img and copied it from the phone to my pc. Then I used fastboot boot magisk_patched.img to make sure the image I made would work. I booted the device and inside Magisk Manager I chose direct install in the list of options and everything went smoothly, and I didnt need to rely on finding images online that would hopefully work.

smokeythebear3 said:
I have the US version which I think is also the global version. Here's my patched boot.img for 10.0.5
https://drive.google.com/file/d/12tZN5D7dmovIeqsx8sTF-B0z2gxA6LG8/view?usp=sharing
Here's the stock boot for 10.0.5 as well if you screw something up.
https://drive.google.com/file/d/1nS0hqVCyntXHjbTzOH7H8-b29-IlAOIt/view?usp=sharing
Don't ask why the file sizes are so different. It just gets smaller for some reason after patching it in magisk.
Click to expand...
Click to collapse
Thanks a bunch for the share. That was the missing piece that I've been looking for. I have the HD1905 variant and I just used Magisk to patch the stock file you provided. After testing, I'm finally rooted. Thanks again.

OnePlus 7t 10.0.8/10.3.1 Magisk patched boot img

I've got the 7T tmo version unlocked via flashing Indian then int firmware. This is the 10.0.8 update from oxygen updater, pulled boot img from payload and patched with magisk. Enjoy.
Patched boot (global)
https://drive.google.com/file/d/1-CpEVcS2nJ7IhrOep6YibimgwZJRxvnI/view?usp=drivesdk
Stock boot (global)
https://drive.google.com/file/d/10X4okwoTVZltYJsOkGo0dv5QfdzU1LOM/view?usp=drivesdk
Full ota link (global)
https://drive.google.com/file/d/1-i5TfdU3Yx-VqSNLBMY5Xov_XYyubEIT/view?usp=drivesdk
________________________________________________________
Patched boot (India)
https://drive.google.com/file/d/10U_WEUiNhM8Maw_q9WTHiHTf7zwG23lO/view?usp=drivesdk
Stock boot (India)
https://drive.google.com/file/d/10UbrzFGWQsmM5ViuOmH-RebwWxHCAAoG/view?usp=drivesdk
Full ota (India)
https://drive.google.com/file/d/10O17sAyOa82nSiQ_yUvYS3QTMk8kG6Xv/view?usp=drivesdk
______________________________________________
European Patched boot 10.0.8:
https://drive.google.com/file/d/1zdBwlO74HT-D8y5yMmXYrW0mFiEtQN_v/view
European Stock:
https://drive.google.com/file/d/1OOSEfuGKrwGRKzsl-orSlVS2YUg4JyJR/view

This is Global (AA) right ? or Europe (BA) ?

bugra333 said:
This is Global (AA) right ? or Europe (BA) ?
Click to expand...
Click to collapse
Global AA

Reserved

Any chance you can create a patched img for the Indian version? Not able to find one.

sathya said:
Any chance you can create a patched img for the Indian version? Not able to find one.
Click to expand...
Click to collapse
I'm starting the download now. When I'm done I'll let you know

sathya said:
Any chance you can create a patched img for the Indian version? Not able to find one.
Click to expand...
Click to collapse
Posted patched up top make sure you grab the right one. I'll link the ota too

zeusofyork said:
Posted patched up top make sure you grab the right one. I'll link the ota too
Click to expand...
Click to collapse
Thanks so much!!! This will be very helpful for us to root!

bugra333 said:
This is Global (AA) right ? or Europe (BA) ?
Click to expand...
Click to collapse
Here You have for EUROPA
https://forum.xda-developers.com/oneplus-7t/how-to/oneplus-7t-10-0-8-magisk-patched-boot-t4055279

Verry food treat. One place for all versions

Flashing issues
Kondi_cool said:
Here You have for EUROPA
https://forum.xda-developers.com/oneplus-7t/how-to/oneplus-7t-10-0-8-magisk-patched-boot-t4055279
Click to expand...
Click to collapse
Hi,
I flashed the european patched boot.img and my phone keeps booting up into the home screen before going blank. It then will boot into fastboot and when i try reboot the phone the same thing happens again. It's also happened after i flashed the stock image to return the phone to normal. What should i do to try fix this?
TIA

Flashing Issues
I flashed Magisk patched boot (global) 10.0.8 for my OP7T (10.0.8 HD65AA) and all it's good. Well done

I am having problem with ota
It sas "root detected full package will be downloaden for install"
I did restore image in magisk.
How to proceed now

karayemis said:
I am having problem with ota
It sas "root detected full package will be downloaden for install"
I did restore image in magisk.
How to proceed now
Click to expand...
Click to collapse
It's not a problem, that's how it should work.
Just follow below for OTAs
https://github.com/topjohnwu/Magisk/blob/master/docs/tutorials.md
Sent from my OnePlus7TPro using XDA Labs

Hello, Sorry for the noobish question.
i'm about to use msm tool to restore my os to OOS 10.0.4(non-rooted). Can i directly flash v10.3.1 (magisk patched) on 10.0.4(non-rooted)?

I'm using Magisk Canary (custom channel: ht_tps://dgadelha.xyz/public/magisk.json) and it looks like it has no Option to perform: "Magisk Manager → Uninstall → Restore Images". Could you please advise on how to proceed from there?
Many thanks in advance

Lossyx said:
It's not a problem, that's how it should work.
Just follow below for OTAs
https://github.com/topjohnwu/Magisk/blob/master/docs/tutorials.md
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
So i have to download en install full oackage after restore image and then without booting install inactive slot ota?
Will this erase anything?
Thanks

karayemis said:
So i have to download en install full oackage after restore image and then without booting install inactive slot ota?
Will this erase anything?
Thanks
Click to expand...
Click to collapse
Yes, follow the instructions in the link I sent you.
And of course, it won't erase anything. I would have given you an heads up if it did.
Sent from my OnePlus7TPro using XDA Labs

the code is "fastboot flash boot whateverthenameis.img".

Tried to flash it, but i got the error "cannot load magisk_patched"...
Any ideas?
Thx a lot for your work!!!
Edit: Solved, it worked after rename the img.file to a shorter name...

root 10.5.8

For whatever reason OnePlus removed the 10.5.8 update from their server. Therefore we can't patch to boot img.
The steps I took were
1. Patch 10.5.6 boot the img in fastboot
2. Reboot into system setup magisk
3. Reboot again in fastboot
4. Boot magisk patched img
5. Go into magisk and install and choose direct install
6. Profit with a 10.5.8 device without the wifi/gps/Bluetooth issues.
Thought I'd share my experience as I bought second hand and it had the latest update and couldn't find the download link to the full system update.

Might want to mention which Magisk, the known problem with Canary?
Also why patch 10.5.6 and not 8

dladz said:
Might want to mention which Magisk, the known problem with Canary?
Also why patch 10.5.6 and not 8
Click to expand...
Click to collapse
He dont have the 10.5.8.full rom to extract and patch the img
So he probably patch the 10.5.6 img , he just boot it temporary on fastboot , going to magisk ,installing magisk and when he's rebooting , he's on 10.5.8 rooted..

Here's stock boot for 10.5.8IN11BA if anyone needs it https://mega.nz/file/sb4WwSBS#jrCL7tek0SLbynTqbPU-s_j5g0cKFRsC4u7DR7S7sCI

cultofluna said:
He dont have the 10.5.8.full rom to extract and patch the img
So he probably patch the 10.5.6 img , he just boot it temporary on fastboot , going to magisk ,installing magisk and when he's rebooting , he's on 10.5.8 rooted..
Click to expand...
Click to collapse
Can't you get it from the updater?

dladz said:
Can't you get it from the updater?
Click to expand...
Click to collapse
Not if you have already updated via the OTA..
He probably got the OTA ( full zip) install it and then boot it..
If you've updated via local upgrade , then the full ROM zip has been saved on internal storage ...
But the easiest way to update and keep root is to just take the ota through the updater..dont reboot go to magisk manager , install magisk on inactive slot , ...done...
Patched img only needed to root after unlocking bootloader ..
Not anymore....

Bought the device updated already and can't find the 10.5.8AA build at all on OnePlus

facing the same issue... if anyone have the 5.8 aa it would be a great help <3

empreror said:
facing the same issue... if anyone have the 5.8 aa it would be a great help <3
Click to expand...
Click to collapse
Patch the 10.5.6 boot IMG and the fastboot boot <patchedmagisk.img>
Setup magisk and reboot into bootloader again to boot the patched image
Then go into magisk and do direct install and finally have working wifi etc.

10.5.8AA Oneplus Pro8 boot.img
https://sourceforge.net/projects/op8pro1058aa/files/10.5.8AA.img/download

bigjailerman said:
10.5.8AA Oneplus Pro8 boot.img
https://sourceforge.net/projects/op8pro1058aa/files/10.5.8AA.img/download
Click to expand...
Click to collapse
Is this the stock boot.img or rooted patched img?

Aporzio said:
Is this the stock boot.img or rooted patched img?
Click to expand...
Click to collapse
Tried it, it's patched.

Aporzio said:
Is this the stock boot.img or rooted patched img?
Click to expand...
Click to collapse
Yes it is patched...sorry for delay

bigjailerman said:
Yes it is patched...sorry for delay
Click to expand...
Click to collapse
Not a problem. I'm glad you didn't answer lol. I ended up teaching myself how to pull the img files from a payload.bin.

JKurtz87 said:
Patch the 10.5.6 boot IMG and the fastboot boot <patchedmagisk.img>
Setup magisk and reboot into bootloader again to boot the patched image
Then go into magisk and do direct install and finally have working wifi etc.
Click to expand...
Click to collapse
Can you be please more specific? I am new here and want to know what does it mean boot temporarily ? This command will boot your device temporray and after reboot it disappear ?
fastboot boot <patchedmagisk.img>

CN OTA ROM / KLEN2105310CN00DRX - JoyUI2.5

CN OTA Firmware - KLEN2105310CN00DRX JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?

get it yourself, https://forum.xda-developers.com/t/guide-get-official-ota-download-link.4312787/

wertus33333 said:
自己動手，https://forum.xda-developers.com/t/guide-get-official-ota-download-link.4312787
Click to expand...
Click to collapse
The phone cannot start now

s22884513 said:
現在手機無法開機
Click to expand...
Click to collapse
**** sry, the update in the thread seems to be broken :S. try booting to bootloader and switching slot "fastboot --set-active=a" or "fastboot --set-active=b" one of the slots should still contain your old system which booted. Then do the update with KLEN2009280cn00mq3 (which i am uploading right now, can take some time...) like in the thread. This update works, i am using it right now on my phone.

wertus33333 said:
**** sry, the update in the thread seems to be broken :S. try booting to bootloader and switching slot "fastboot --set-active=a" or "fastboot --set-active=b" one of the slots should still contain your old system which booted. Then do the update with KLEN2009280cn00mq3 (which i am uploading right now, can take some time...) like in the thread. This update works, i am using it right now on my phone.
Click to expand...
Click to collapse
Tried but couldn't succeed ；(
Have you updated to 12.5?

no, only 12. did never get a new update and i have a lot of data on my phone ^^'

s22884513 said:
Tried but couldn't succeed ；(
Have you updated to 12.5?
Click to expand...
Click to collapse
what did you do exactly?

12.5 Downgrade 12
wertus33333 said:
what did you do exactly?
Click to expand...
Click to collapse

s22884513 said:
CN OTA Firmware - KLEN2107141CN00MR0 JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
Click to expand...
Click to collapse
what do you need from payload.bin

kevin mitnick said:
what do you need from payload.bin
Click to expand...
Click to collapse
radio.img IMEI is currently missing

s22884513 said:
radio.img IMEI is currently missing
Click to expand...
Click to collapse
radio img means modem.img, right ?
here is this
-https://drive.google.com/file/d/1UVMEnNLMouqFUyVxNP8z-5iz-vn_T2O-/view?usp=sharing-
i'd extracted payload.bin..
i used this tutorial
[Guide] How to extract payload.bin from OTA
This is guide for extract payload.bin from OTA zip file ----------------- Pre-requirement: - Python3 ----------------- For extract OTA update Please flow step by step instruction Step 1: Get a OTA for Nokia 7 plus -> here Step 2: Download...
forum.xda-developers.com
----edit----
for next time, may you need backup modem or radio image from your device before modifiying. you can use partition backup application from play store..

s22884513 said:
CN OTA Firmware - KLEN2107141CN00MR0 JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
Click to expand...
Click to collapse
link that you provide is not MR0..that rom is KLEN2105310CN00DRX, beta version..

s22884513 said:
radio.img IMEI is currently missing
Click to expand...
Click to collapse
kevin mitnick said:
link that you provide is not MR0..that rom is KLEN2105310CN00DRX, beta version..
Click to expand...
Click to collapse
Does he belong to JOY12.5?

s22884513 said:
Does he belong to JOY12.5?
Click to expand...
Click to collapse
yup..it is joyui 12.5..

s22884513 said:
CN OTA Firmware - KLEN2105310CN00DRX JoyUI2.5
KLEN2106230CN00MR0.zip
drive.google.com
Someone can unzip payload.bin ?
Click to expand...
Click to collapse
my bs 3 got bootloop after revert to MQ3 from rom that link above..since I know that rom actually only beta dev rom, I revert back.
I did flashed qfil global rom and CN rom, change slot a, slot b, but nothing. now my bs 3 only bootloop.

Question Root & TWRP ???

Can anyone provide a Root and TWRP file for this tablet
We all gonna appreciate it

And a lot of custom roms

there is no twrp at the moment, but you can root it by extract the boot.img file in the firmware then use magisk to patch it.
here is the newest boot.img (12.5.4.0) for xiaomi pad 5 global version
128 MB file on MEGA
mega.nz

caubechandai said:
there is no twrp at the moment, but you can root it by extract the boot.img file in the firmware then use magisk to patch it.
here is the newest boot.img (12.5.4.0) for xiaomi pad 5 global version
128 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
how to do this procedure friend?

Kuasne said:
how to do this procedure friend?
Click to expand...
Click to collapse
you need to unlock bootloader first.
Installation | Magisk (topjohnwu.github.io)

caubechandai said:
you need to unlock bootloader first.
Installation | Magisk (topjohnwu.github.io)
Click to expand...
Click to collapse

Do we have to wait 7 days to unlock the bootloader?

Should I flash it using the fastboot? its not working for me

Grmknnth said:
Should I flash it using the fastboot? its not working for me
Click to expand...
Click to collapse
I think the correct command is
Code:
fastboot boot patched_boot.img

i read this doc : Installation | Magisk (topjohnwu.github.io) and i saw :
===
If your device does not have boot ramdisk, read the Magisk in Recovery section before installing. The information in that section is VERY important!
===
Anyone knows if mi-pad-5 uses boot ramdisk or not???

Unlocked my pad today and want to root. Sadly there is no fastboot rom for 12.5.8.0 global available. Can I use the boot.img from 12.5.4.0 fastboot version?

xfish2000 said:
i read this doc : Installation | Magisk (topjohnwu.github.io) and i saw :
===
If your device does not have boot ramdisk, read the Magisk in Recovery section before installing. The information in that section is VERY important!
===
Anyone knows if mi-pad-5 uses boot ramdisk or not???
Click to expand...
Click to collapse
Install magisk app and check it yourself

hyp89 said:
Unlocked my pad today and want to root. Sadly there is no fastboot rom for 12.5.8.0 global available. Can I use the boot.img from 12.5.4.0 fastboot version?
Click to expand...
Click to collapse
Yes, it's same file.

hyp89 said:
Unlocked my pad today and want to root. Sadly there is no fastboot rom for 12.5.8.0 global available. Can I use the boot.img from 12.5.4.0 fastboot version?
Click to expand...
Click to collapse
I think It for you
下载小米平板 5 (nabu) 稳定版刷机包 MIUI12.5 V12.5.8.0.RKXMIXM | XiaomiROM.com
你正在看的是 小米平板 5（代号 nabu）的 稳定版 刷机包，ROM 版本为 V12.5.8.0.RKXMIXM。刷机前，请确保机型准确无误。您可以在 Fastboot 模式下通过命令 fastboot getvar product 来查看型号。 …
xiaomirom.com

chaunc said:
I think It for you
下载小米平板 5 (nabu) 稳定版刷机包 MIUI12.5 V12.5.8.0.RKXMIXM | XiaomiROM.com
你正在看的是 小米平板 5（代号 nabu）的 稳定版 刷机包，ROM 版本为 V12.5.8.0.RKXMIXM。刷机前，请确保机型准确无误。您可以在 Fastboot 模式下通过命令 fastboot getvar product 来查看型号。 …
xiaomirom.com
Click to expand...
Click to collapse
12.5.4.0 global boot.img is working

hyp89 said:
12.5.4.0 global boot.img is working
Click to expand...
Click to collapse
Congratulation

Anyone have the boot.img of the global version 12.5.11?

du.port said:
Anyone have the boot.img of the global version 12.5.11?
Click to expand...
Click to collapse
here is (12.5.11) boot.img already patched for magisk
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

@jaca22 - thanks a lot for your boot.img - it works fine for me. After unlocking the bootloader I could directly install magisk.

Do you lost L1 after unlock bootloader and root?