Related
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
HuaweiG510 said:
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Thanks dear. It worked.
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
HuaweiG510 said:
Thanks dear. It worked.
Click to expand...
Click to collapse
If that worked U can press thanks :good: button
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
poirot13 said:
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
Click to expand...
Click to collapse
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
S34Qu4K3 said:
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
Click to expand...
Click to collapse
It happens the same to me, but I don't know how to do.
I'm a newbie and I'm not familiar with this command...could you kindly explain what I have to do step by step?
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
It works!!! You are simply a genius!
Thanks a lot. :laugh:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
hey man, ur posts in this thread were a real big help for me, i accidently wiped my stock recovey (dont ask ) and got stuck at the boot logo with nothing working at all and ofcourse froce updating wont work in apsence of recovery (put update.app on sdcard/dload bla bla)
so i downloaded the stock recovery you posted and flashed it via adb after i got my pc to see my device with ur combination back in post #10 (hold power and vol - buttons while plugged to pc) and everything went great
thanks for your help man, really can't thank u enough, thought my device was hardbricked
Mine doesnot work
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
I am using Huawei G 510-0200 in Pakistan. I had rooted my cell phone and was converting a user app into system app via Titanium backup. The process was taking long time so force closed Titanium Backup app. This caused phone crash and it restarted and hung up at huawei logo.
Now i tried factory data reset and clearing cache in Power and Volume + key mode. It did not work. I tried applying update (two different roms, one custom pakistani rom and other was normal g510-0200 rom) in the same mode but it shows installation aborted.
I tried Forced Firmware Update mode too. I placed update.app file in the sd card and restarted cell phone by holding Volume+, Volume- and Power key. In that mode, it shows unpacking Step 1/2 for a while and then instead of installing, it shows Update Failed.
Error log shows this:
filename = /mmc1/dload/update.app call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST CMD=0xf,moduleaddr = 0xd2000000, len_tmp=0x4000
I have tried everywhere and I'll be really greatful if you can sort this out for me. :crying:
hi
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Good bless you. It worked also for me. Thank you very muck , thank you thank you.
No luck.
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
when entered the command for original recovery its says 'error:cannot load recovery_original_flashable.img'
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello !!
Model Huwaei : Asceud G510 -- G510-0200
Problem : Stuck On Logo Flash Done
I Have Same Handset-Stuck On Huwaei Logo ! Already Flashed !!
With
HUAWEI-Ascend-G510-firmware（G510-0200,Android_4.1,Emotion_UI,V100R001C00B173,Normal,05011EUC）
Above File But Same Frimware Update Done !! But Sam Stuck On Huwaei Or Restart
Any Guidence- @ ?
please my p6 is stucked at bootloop and when i go to recovery it says unable to mount cache,plz any help
Hello.
I flashed one KDZ for my country and root my E987. I also used freegee to install CWM (it should unlock boatloader I guess).
The problem in that when: phone turning on, trying to enter recovery, fastboot or download mode I have nothing but a black screen.
The phone is working perfectly.
In freegee I see these options: Backuo and restore EFS, Re LOCK and CWM/TWPR installations
What can be wrong??
In Optimus G (E975), should turn of phone completely (press power button for 10 seconds), then press vol up + power to start phone in bootloader. Then press vol down twice and then power button to start recovery.
I tried again but nothing but a black screen
Creative9170 said:
In Optimus G (E975), should turn of phone completely (press power button for 10 seconds), then press vol up + power to start phone in bootloader. Then press vol down twice and then power button to start recovery.
Click to expand...
Click to collapse
So, if you can even access to your bootloader with vol up + power , you can connect phone to PC and flash a recovery image file via fastboot adb. (put your recovery image file in fastboot folder and then open a command prompt in that folder and type:
Code:
fastboot flash recovery recoveryfilename.img
Also maybe on your black screen you can do this.
If not, disconnect phone from PC, turn it off, press vol up + vol down together and connect USB cable, you may see download mode. if you see download mode, following method may help, but I'm not sure about E987! I did this on my phone E975 and it works: http://forum.xda-developers.com/showthread.php?t=2249500
Please consider it may remove all your data including system, userdata, sdcard , etc.
Good luck friend
ErnestoD said:
I tried again but nothing but a black screen
Click to expand...
Click to collapse
E987 is the international E975 but sold in Argentina. Its the same celphone.
I understood what U said and I going to find how/where to find a recovery image
I tried to enter recovery and download mode and always black screen, but phone is properly detected on PC.
I flashed several KDZ´s and same thing.
Thanks for your help
:laugh:
Creative9170 said:
So, if you can even access to your bootloader with vol up + power , you can connect phone to PC and flash a recovery image file via fastboot adb. (put your recovery image file in fastboot folder and then open a command prompt in that folder and type:
Code:
fastboot flash recovery recoveryfilename.img
Also maybe on your black screen you can do this.
If not, disconnect phone from PC, turn it off, press vol up + vol down together and connect USB cable, you may see download mode. if you see download mode, following method may help, but I'm not sure about E987! I did this on my phone E975 and it works: http://forum.xda-developers.com/showthread.php?t=2249500
Please consider it may remove all your data including system, userdata, sdcard , etc.
Good luck friend
Click to expand...
Click to collapse
Your welcome
If you could flash kdz means you can access download mode so you can try that method I've said.
Also you can download recovery images from following links :
CWM: https://www.clockworkmod.com/rommanager
TWRP for Optimus G (Sprint) : http://techerrata.com/browse/twrp2/geehrc4g
ErnestoD said:
E987 is the international E975 but sold in Argentina. Its the same celphone.
I understood what U said and I going to find how/where to find a recovery image
I tried to enter recovery and download mode and always black screen, but phone is properly detected on PC.
I flashed several KDZ´s and same thing.
Thanks for your help
:laugh:
Click to expand...
Click to collapse
Sent from my LG-E975 using Tapatalk
I tried to enter fastboot yesterdar and flash recovery image but I couldnt, But I could enter download mode (remember that I have black screen) and flash another kdz again.
I will try your second suggestion using tinybeen
Thanks for your help. Really appreciate this
Creative9170 said:
Your welcome
If you could flash kdz means you can access download mode so you can try that method I've said.
Also you can download recovery images from following links :
CWM: https://www.clockworkmod.com/rommanager
TWRP for Optimus G (Sprint) : http://techerrata.com/browse/twrp2/geehrc4g
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
ErnestoD said:
I tried to enter fastboot yesterdar and flash recovery image but I couldnt, But I could enter download mode (remember that I have black screen) and flash another kdz again.
I will try your second suggestion using tinybeen
Thanks for your help. Really appreciate this
Click to expand...
Click to collapse
Your welcome say thanks to autoprime that makes tinybin
Please remember that after tinybin you may see black screen and can't boot android. But fastboot and recovery should work and you can push a flashable zip ROM and flash it through recovery.
Sent from my LG-E975 using Tapatalk
i tryed to root my phone everything was going alright, but wen i went to boot it up i got stuck on
ASUS IN SEARCH OF INCREDIBLE and a loading logo, i can not get in to my bootloader
my pc detects it but fast boot and adb do not detect it
what do i do :crying::crying::crying::crying:
FluidArc said:
i tryed to root my phone everything was going alright, but wen i went to boot it up i got stuck on
ASUS IN SEARCH OF INCREDIBLE and a loading logo, i can not get in to my bootloader
my pc detects it but fast boot and adb do not detect it
what do i do :crying::crying::crying::crying:
Click to expand...
Click to collapse
Probably you soft bricked your phone. I got into a similar situation when I applied OTA after root. Dont worry, its very easy to recover your phone. It should be able to boot in Fasboot mode. If it does, follow follow this guide:
.theandroidsoul.com/how-to-unbrick-asus-zenfone-2-works-on-ota-fail-too-82039/ (Add www at the start)
Download the latest pre-rooted system .img from here:
mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
Download the stuff needed and then just follow the guide. Hopefully you recover your device. Best of luck!
EDIT: Forgot to add but did you install the adb drivers? Probably thats the reason Fastboot and adb dont detect it. Or did you go into the fastboot mode in the phone? If not, do that first. To do it, follow these steps:
1. Power your device down.
2. Press and hold the power and volume up button.
3. Release the power button when it vibrates.
4. Release the volume up button once the ASUS splashscreen appears.
5. Now the device should be in Fasboot mode.
6. Then connect your phone to your PC (dont forget to install the drivers!) using the USB Cable and go to the folder where the flashtools are.
7. Hold Shift and right click > then click open command window here
8. Type "fastboot devices". Enter the command two times. (Cause the first time it will start daemon or something like that)
If your device shows up, congrats! You are in fastboot mode and it is working.
now what do i do
i do not know what ferwere i am on and my recovery is broken how to i get it up and runing
dh_711 said:
Probably you soft bricked your phone. I got into a similar situation when I applied OTA after root. Dont worry, its very easy to recover your phone. It should be able to boot in Fasboot mode. If it does, follow follow this guide:
.theandroidsoul.com/how-to-unbrick-asus-zenfone-2-works-on-ota-fail-too-82039/ (Add www at the start)
Download the latest pre-rooted system .img from here:
mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
Download the stuff needed and then just follow the guide. Hopefully you recover your device. Best of luck!
EDIT: Forgot to add but did you install the adb drivers? Probably thats the reason Fastboot and adb dont detect it. Or did you go into the fastboot mode in the phone? If not, do that first. To do it, follow these steps:
1. Power your device down.
2. Press and hold the power and volume up button.
3. Release the power button when it vibrates.
4. Release the volume up button once the ASUS splashscreen appears.
5. Now the device should be in Fasboot mode.
6. Then connect your phone to your PC (dont forget to install the drivers!) using the USB Cable and go to the folder where the flashtools are.
7. Hold Shift and right click > then click open command window here
8. Type "fastboot devices". Enter the command two times. (Cause the first time it will start daemon or something like that)
If your device shows up, congrats! You are in fastboot mode and it is working.
Click to expand...
Click to collapse
Once happened to my zf2, what i did is formatting cache from the adb then my device could be detected, thus i could enter the recovery mode
Sent from my ASUS_Z00AD using XDA Free mobile app
i can not enter recovery
dawnsleeper said:
Once happened to my zf2, what i did is formatting cache from the adb then my device could be detected, thus i could enter the recovery mode
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
it is fix all good guys thx
FluidArc said:
i can not enter recovery
Click to expand...
Click to collapse
Hey,
Could you please help me (or anyone for that matter).....I've soft bricked my phone and I'm a little weary about following any other steps incase I fully brick the phone.
I have a Zenfone 2 that was CN Z00A 2.20.40.63 , I tried to root because random chinese apps kept downloading on my phone and obv it soft bricked (kept looping at boot).....since then I have tried a lot of stuff without luck and my brain is fried from all the information.... I went to the recovery mode but ADP couldn't find my phone and then I loaded a recovery image on my SD calling it MOFD_SD.ZIP but that didn't work due to signature verification error. Now after reading what you wrote I can see that fastboot is recognizing my device....I would go through with the process but I'm afraid if I screw this one up it could be the end of fastboot working and therefore me being royally screwed.
Since my phone was naturally CN Z00A 2.20.40.63 I'm wondering if the pre-rooted images on the site you mentioned above will work? There is no download for CN Z00A 2.20.40.63 and I want to know whether it's safe to use CN Z00A 2.20.40.61 (or a WW image) or whether I have to try another option (if you have any suggestions).
If anyone could reply with help it would be greatly greatly appreciated.
dh_711 said:
Probably you soft bricked your phone. I got into a similar situation when I applied OTA after root. Dont worry, its very easy to recover your phone. It should be able to boot in Fasboot mode. If it does, follow follow this guide:
.theandroidsoul.com/how-to-unbrick-asus-zenfone-2-works-on-ota-fail-too-82039/ (Add www at the start)
Download the latest pre-rooted system .img from here:
mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
Download the stuff needed and then just follow the guide. Hopefully you recover your device. Best of luck!
EDIT: Forgot to add but did you install the adb drivers? Probably thats the reason Fastboot and adb dont detect it. Or did you go into the fastboot mode in the phone? If not, do that first. To do it, follow these steps:
1. Power your device down.
2. Press and hold the power and volume up button.
3. Release the power button when it vibrates.
4. Release the volume up button once the ASUS splashscreen appears.
5. Now the device should be in Fasboot mode.
6. Then connect your phone to your PC (dont forget to install the drivers!) using the USB Cable and go to the folder where the flashtools are.
7. Hold Shift and right click > then click open command window here
8. Type "fastboot devices". Enter the command two times. (Cause the first time it will start daemon or something like that)
If your device shows up, congrats! You are in fastboot mode and it is working.
Click to expand...
Click to collapse
Captain_Hindsight said:
Hey,
Could you please help me (or anyone for that matter).....I've soft bricked my phone and I'm a little weary about following any other steps incase I fully brick the phone.
I have a Zenfone 2 that was CN Z00A 2.20.40.63 , I tried to root because random chinese apps kept downloading on my phone and obv it soft bricked (kept looping at boot).....since then I have tried a lot of stuff without luck and my brain is fried from all the information.... I went to the recovery mode but ADP couldn't find my phone and then I loaded a recovery image on my SD calling it MOFD_SD.ZIP but that didn't work due to signature verification error. Now after reading what you wrote I can see that fastboot is recognizing my device....I would go through with the process but I'm afraid if I screw this one up it could be the end of fastboot working and therefore me being royally screwed.
Since my phone was naturally CN Z00A 2.20.40.63 I'm wondering if the pre-rooted images on the site you mentioned above will work? There is no download for CN Z00A 2.20.40.63 and I want to know whether it's safe to use CN Z00A 2.20.40.61 (or a WW image) or whether I have to try another option (if you have any suggestions).
If anyone could reply with help it would be greatly greatly appreciated.
Click to expand...
Click to collapse
Well, I'm not sure if it'll work but check this out (Scroll down to No. 4 - Changing from CN to WW version):
forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
I'm no expert, but to be honest the state your device is in, I don't see any other options. Because when my device (it had WW firmware) got soft-bricked, I followed the guide by androidsoul and it did recover my phone. Not sure about yours since its a CN one.
If you like living on the edge and are really desperate, go ahead try this out, if not, better wait for someone with more knowledge then me.
EDIT: I forgot but since ADB isn't working, you can't use this method. So the only option I see that you have is flashing a pre-rooted rom.
Its very complicated. My T705's power button was damaged by water. And i flashed Stock MM rom with odin. It was fine after flashing, the tablet boot into the os properly, work very well in the os.
But then i want to wipe the cache and data after that, so i was using the code"adb reboot to recovery" to get into recovery mode because my power button was broken. (I thought it can be using home button to select in recovery mode)
But the nightmare is i can't select anything in recovery mode which requiring a power button. So i can't wipe the cache, also can't select the option to reboot my tablet...... I've tried to hold both the volume down and home key to go to the download mode menu, and select restart by holding volume down, but it go to recovery again even after removing the battery, i think it's because the adb command.
And the strangest thing is i can't use my volume up button in download mode menu, so sadly i can't flash the rom again,:crying: but the volume up is working well in recovery and in the os......
Is there anyway to prevent the tablet to boot into the recovery again? I'm quite sure it's not the problem when flashing MM rom, the problem should be the adb command makes my tablet boot into recovery until i change the boot setting in recovery mode.
hungpakto said:
Its very complicated. My T705's power button was damaged by water. And i flashed Stock MM rom with odin. It was fine after flashing, the tablet boot into the os properly, work very well in the os.
But then i want to wipe the cache and data after that, so i was using the code"adb reboot to recovery" to get into recovery mode because my power button was broken. (I thought it can be using home button to select in recovery mode)
But the nightmare is i can't select anything in recovery mode which requiring a power button. So i can't wipe the cache, also can't select the option to reboot my tablet...... I've tried to hold both the volume down and home key to go to the download mode menu, and select restart by holding volume down, but it go to recovery again even after removing the battery, i think it's because the adb command.
And the strangest thing is i can't use my volume up button in download mode menu, so sadly i can't flash the rom again,:crying: but the volume up is working well in recovery and in the os......
Is there anyway to prevent the tablet to boot into the recovery again? I'm quite sure it's not the problem when flashing MM rom, the problem should be the adb command makes my tablet boot into recovery until i change the boot setting in recovery mode.
Click to expand...
Click to collapse
Install twrp, you won't need a power button then.
ashyx said:
Install twrp, you won't need a power button then.
Click to expand...
Click to collapse
How to install when this tablet can't do anything now..
Can't select anything now, can't go into the os and use adb to boot into download mode
hungpakto said:
How to install when this tablet can't do anything now..
Can't select anything now, can't go into the os and use adb to boot into download mode
Click to expand...
Click to collapse
If your power button doesn't work how do you turn the device on after removing the battery?
unified android toolkit has a reboot device option...
mordeith said:
unified android toolkit has a reboot device option...
Click to expand...
Click to collapse
That would only work if you could actually use adb.
ashyx said:
That would only work if you could actually use adb.
Click to expand...
Click to collapse
probably would help,if i read all the posts before commentijng...but ive used it on random devices to reboot it..not soleley from adb
ashyx said:
If your power button doesn't work how do you turn the device on after removing the battery?
Click to expand...
Click to collapse
Holding vol down + home key can boot to the download mode menu.
But the device will automatically turn on after inserting the battery, no need to press any button, but the device only boot into recovery after i use the adb boot into recovery command.
hungpakto said:
Holding vol down + home key can boot to the download mode menu.
But the device will automatically turn on after inserting the battery, no need to press any button, but the device only boot into recovery after i use the adb boot into recovery command.
Click to expand...
Click to collapse
If that's the case that means the power button is stuck on or you wouldn't be able to power on or boot to Download mode.
All you need to do is flash the stock firmware or twrp and it will reboot back to the OS.
Hopefully I've got your fix:
When you insert the battery your device boots up, if so, insert the battery and press the correct key combo while the splash screen from logo.bin is showing to boot into the download mode.
After that flash TWRP latest version with Odin. Then when your phone again boots to recovery, chose Reboot -> System to boot Android.
---
If the above isn't applicable and you can start Android somehow, I will download either FlashFire or MobileOdin to flash another recovery/ROM.
Sent using Tapatalk
ashyx said:
If that's the case that means the power button is stuck on or you wouldn't be able to power on or boot to Download mode.
All you need to do is flash the stock firmware or twrp and it will reboot back to the OS.
Click to expand...
Click to collapse
And don't know why the volume up doesn't work in the download mode menu, stuck in the download mode menu and can't select the option "continue" to go into the download mode
hungpakto said:
Holding vol down + home key can boot to the download mode menu.
But the device will automatically turn on after inserting the battery, no need to press any button, but the device only boot into recovery after i use the adb boot into recovery command.
Click to expand...
Click to collapse
lot of problems can be fixed by samsung k300 tool ,disconect phone and start that tool and connect phone again and let the tool find the phone ,if found just click that icon and phone go to download mode and you can flash back stock firmware...that tool dont need adb enable just working usb cable ,i say working cant be fake...
Hey Guys i have an Big Problem and i dont knwo what to please help
So i wanted to flash lineageos and that worked good but its garbage the camera ist very basic and there are a lot of features which not work
So i decide to get back to Oxygenos und root it
Yeah and know my phone is stuck at something it only shows the one plus logo, sometimes nothing, and somethimes i get into fastboot but that not helping because when i boot or flash boot a recovery nothing happends it shows only the one plus logo!!
So i have an One Plus image but i cant sideload it into fastboot
is there an fastboot image?
i hope so!!
thans for reading i am from germany so my english is not the best
Use the msm tool for unbrick your devices
ChrisFeiveel said:
Use the msm tool for unbrick your devices
Click to expand...
Click to collapse
Hey thanks for anwering i have downloaded it but i really dont know how to use it
but the bigger problem ist that the phone only shows a red flash and a white circle!
so i cant get into fastboot
SeppelLetsPlay said:
Hey thanks for anwering i have downloaded it but i really dont know how to use it
but the bigger problem ist that the phone only shows a red flash and a white circle!
so i cant get into fastboot
Click to expand...
Click to collapse
Search for the link and be sure to read on how to use the tool completely until you understand!
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
TheGhost1951 said:
Search for the link and be sure to read on how to use the tool completely until you understand!
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
Yeah but i dont get in EDL or Fastboot
its only shows the obeplus logo every 3 seconds and reboot
but power + vol +/- are ignored
only +/- is also not working
please help i am despair
SeppelLetsPlay said:
Yeah but i dont get in EDL or Fastboot
its only shows the obeplus logo every 3 seconds and reboot
but power + vol +/- are ignored
only +/- is also not working
please help i am despair
Click to expand...
Click to collapse
Try power+vol- to get to recovery.... Other than that keep trying different button combinations... What happens when you hold both vol buttons and power button for more than ten seconds? To completely shut phone off hold vol up and power button. Otherwise I have heard some say let the phone battery run down battery until phone shuts off. Then try the buttons again. Only just both vol buttons no power and phone not plugged in. Start the MSM tool it will say waiting on device, then with phone off, hold both vol buttons down wait 10 seconds then connect phone to PC.
So when i press power + "-" nothing happend, no vibration, no screen nothing
when i press +/- and power the phone starts and there stands fastboot but a few seconds läter come the red flash and the phone shuts down(but it is onto an powercord)
when i only press +/- also nothing happend and the phone is not responded in msm
SeppelLetsPlay said:
So when i press power + "-" nothing happend, no vibration, no screen nothing
when i press +/- and power the phone starts and there stands fastboot but a few seconds läter come the red flash and the phone shuts down(but it is onto an powercord)
when i only press +/- also nothing happend and the phone is not responded in msm
Click to expand...
Click to collapse
Do not use +/- and power....do not use the power button just +/- only
TheGhost1951 said:
Do not use +/- and power....do not use the power button just +/- only
Click to expand...
Click to collapse
ok but as i sag wehen i power off the device(with fastboot) the +/- doesent work and its not regnosized
but i have sucsessfully launched twrp with fastboot boot twrp
but when i sideload the zip i get the error that the storage cant be mounted
SeppelLetsPlay said:
ok but as i sag wehen i power off the device(with fastboot) the +/- doesent work and its not regnosized
but i have sucsessfully launched twrp with fastboot boot twrp
but when i sideload the zip i get the error that the storage cant be mounted
Click to expand...
Click to collapse
You don't side load it, make sure the magisk app is located in phone storage, boot to twrp then select install while in twrp......
Ok and for what i need magisk first i must get oxygenos to run
and how can ich get magisk.apk onto the device? on my pc i cant see the phone/storage
SeppelLetsPlay said:
Ok and for what i need magisk first i must get oxygenos to run
and how can ich get magisk.apk onto the device?
Click to expand...
Click to collapse
Sorry that response was for another person!
TheGhost1951 said:
Sorry that response was for another person!
Click to expand...
Click to collapse
oh ok sorry
TheGhost1951 said:
You don't side load it, make sure the magisk app is located in phone storage, boot to twrp then select install while in twrp......
Click to expand...
Click to collapse
Ok, you were able to get to fastboot, now we are getting somewhere....hold on. We will get you up and running....!
You will need phone in fastboot mode connected to PC..,..do you have the ROM you want to flash?
TheGhost1951 said:
You will need phone in fastboot mode connected to PC..,..do you have the ROM you want to flash?
Click to expand...
Click to collapse
yeah i have the stock rom
c.47 europe full ota
OnePlus 9 and 9 Pro Firmware Flash File (Stock ROM)
If you're using a OnePlus 9 and 9 Pro or planning to buy it, then this guide is for you. If you want to install Stock Firmware, here we will share the
www.getdroidtips.com
SeppelLetsPlay said:
yeah i have the stock rom
c.47 europe full ota
OnePlus 9 and 9 Pro Firmware Flash File (Stock ROM)
If you're using a OnePlus 9 and 9 Pro or planning to buy it, then this guide is for you. If you want to install Stock Firmware, here we will share the
www.getdroidtips.com
Click to expand...
Click to collapse
Extract the zip, should see a payload.bin and change it to payload.img. then fastboot flash payload.img that will flash it to the phone... Then fastboot boot, that should reboot into setup screen on phone. If it doesn't, the last step would be to change the active slot and reboot again in fastboot mode...
Finally, from fastboot mode, fastboot twrp img and in twrp tap on reboot and boot to EDL mode with MSM tool "started" and that will start the process... If the above procedure fails! This is the way I recover from a crashed phone!
unknown partition 'payload.img'
error: cannot determine image filename for 'payload.img'
Does not work
SeppelLetsPlay said:
unknown partition 'payload.img'
error: cannot determine image filename for 'payload.img'
Does not work
Click to expand...
Click to collapse
Read my last post above...to use the MSM tool