My wife had been on whatever stock ROM came on her Pixel 2 since i bought it with no issues. She ran into a problem after maxing out her storage that the phone wouldn't boot and stayed stuck at the "G" boot screen. I got that fixed by sideloading an OTA of what seems to be some pre-release version of Android. it says "R" version. Many vital apps aren't working correctly - messaging, gmail, can't search from google bar, camera stopped working properly. So i am thinking i should start fresh and install something else now that at least the OS is back booting properly and hopefully everything will work ok.
I just want to make sure if anyone can help tell me what i'm dealing with, i believe this was a locked bootloader? not sure i can or need to unlock it.... > Install twrp... > Flash stock rom...? she doesn't need a fancy rom just something simple and stable.
Here's some of her vital info, any tips greatly apprecaited as i'm out of the loop on this stuff and an old pedestrian user at best.
Android Version
R
Baseband version
g8998-00020-1912200251
kernel version
4.4.210-gf13e65034114-ab6213703
Build Number
Rpp2.20227.009
Since your phone boots now. Simply wiping out everything should do the trick i guess.
Yeah. You can a factory reset. Your are currently on Android 11(R) preview ROM, it's still in the early phases and not suitable as a daily driver.
If all fails you can always flash a factory image, just remember to backup your data first.
Is this device a carrier device and if so, which carrier? You can only flash factory images with an unlocked bootloader so you need to figure that out first.
To figure out if you can unlock the bootloader you will first have to figure out if you have a Google or Verizon variant. Google variants can be unlocked. Verizon variants, for the most part, can't (although there is a thread where I believe someone may have done it on a Verizon variant). To figure out if you have a Google or Verizon, go here... https://www.imeipro.info/check_lg.html
Under "Buyer Name", if it says Google you're good to go. If it says Verizon or VZW, then you can't unlock the bootloader (unless the method in the thread I mentioned above actually works).
If you find you have a Google variant then via fastboot unlock the bootloader and fastboot flash the latest Q factory image.
https://9to5google.com/2020/04/23/h...d-11-dp1-to-android-10-on-google-pixel-video/
u need check ur phone can or not unlock bootloader.
if can... first thing u need to do is enable " oem unlock" in "development options"
when u unlock u can flash whatever firmware you want.
.
the problem u in android 11 . this very much bug.
Once you unlock, it'll wipe the phone.
You say you're running 11 DP1... At this point, I'd suggest signing up for the beta program and let the system update to I'd imagine the latest preview. Doing this should not wipe the phone.
From there you should have a working device and can back up what you want.
You should be given the option to unenroll on the beta website. Doing that, will downgrade the phone to the latest 10 release. it WILL also wipe the phone.
Go here. I see there's a link that could help you out.
google.com/android/beta
Related
I had updated by using the spam update trick, but I had forgotten to reset my watch before that. Here are a few problems that accured because of that:
- unable to link Google account during setup. Was able to link afterwards after a bit of difficulty.
- Bluetooth keeps disconnecting from phone. Problem only started a few days ago.
- overall buggy performance. Even though it is rumered that a second core was enabled.
- suprisingly better battery life! That's not a problem isint it? :silly:
To solve these problems I tried resetting but to no avail. So the only thing to do is try reinstalling the stock firmware. I still have warrenty so I don't want to unlock the bootloader right now. I know that you can restore a stock system image on phones without unlocking the bootloader. I would prefer an 2.0 system image.
Is there a method available?
164 views and no comments.
Soneliem said:
I had updated by using the spam update trick, but I had forgotten to reset my watch before that. Here are a few problems that accured because of that:
- unable to link Google account during setup. Was able to link afterwards after a bit of difficulty.
- Bluetooth keeps disconnecting from phone. Problem only started a few days ago.
- overall buggy performance. Even though it is rumered that a second core was enabled.
- suprisingly better battery life! That's not a problem isint it? :silly:
To solve these problems I tried resetting but to no avail. So the only thing to do is try reinstalling the stock firmware. I still have warrenty so I don't want to unlock the bootloader right now. I know that you can restore a stock system image on phones without unlocking the bootloader. I would prefer an 2.0 system image.
Is there a method available?
Click to expand...
Click to collapse
To restore the stock 2.0 image without unlocking your bootloader, you would need the officially signed 2.0 firmware package from Google/Huawei. These packages are easy to get for phones because carriers will often have a "repair tool" that downloads the full package and flashes it. Once downloaded, the package is easy to capture and upload for everyone else to have. I'm aware of no such tool for the HW, and I don't think that Google posts the full firmware packages anywhere other than the 1.5 package that they posted on the AW 2.0 dev preview site.
So without unlocking your bootloader, the answer to your question is no. If you want to unlock it, you can flash the 1.5 image and then OTA back to 2.0.
TheSt33v said:
To restore the stock 2.0 image without unlocking your bootloader, you would need the officially signed 2.0 firmware package from Google/Huawei. These packages are easy to get for phones because carriers will often have a "repair tool" that downloads the full package and flashes it. Once downloaded, the package is easy to capture and upload for everyone else to have. I'm aware of no such tool for the HW, and I don't think that Google posts the full firmware packages anywhere other than the 1.5 package that they posted on the AW 2.0 dev preview site.
So without unlocking your bootloader, the answer to your question is no. If you want to unlock it, you can flash the 1.5 image and then OTA back to 2.0.
Click to expand...
Click to collapse
Thanks, that was my fear. I will restore to 1.5 and then upgrade. Thanks for your in-depth explanation.
Hello All,
It been a while since I've been lurking on the forums. Last time I was here was just after when I got the pixel xl and needed to root and unlock it, and was looking for how to update.
Back then when the update past 7.1.1 released they were having issues keeping root and unlocked status after the update.
I'm looking to update my phone now to the newest, stable release, that will let me keep root and unlocked bootloader on a Verizon Google pixel xl.
Here is where I'm currently at:
Verizon Google pixel xl.
Rooted
Unlocked bootloader
7.1.1 (NOF27B) stock image
Flash fire installed
Twrp installed
As of late I've had the common battery issue with this version get worse as the phone ages and now after landing in Indianapolis a few hours ago I'm having radio issues that I'm hoping a fresh install or update will fix.
I'm just looking for some direction on what steps I need to do to update and not lose root or unlocked bootloader.
I need to get full functionality of my phone back asap, so I appreciate all of your help with this.
Thank you
Hobocoe said:
Hello All,
It been a while since I've been lurking on the forums. Last time I was here was just after when I got the pixel xl and needed to root and unlock it, and was looking for how to update.
Back then when the update past 7.1.1 released they were having issues keeping root and unlocked status after the update.
I'm looking to update my phone now to the newest, stable release, that will let me keep root and unlocked bootloader on a Verizon Google pixel xl.
Here is where I'm currently at:
Verizon Google pixel xl.
Rooted
Unlocked bootloader
7.1.1 (NOF27B) stock image
Flash fire installed
Twrp installed
As of late I've had the common battery issue with this version get worse as the phone ages and now after landing in Indianapolis a few hours ago I'm having radio issues that I'm hoping a fresh install or update will fix.
I'm just looking for some direction on what steps I need to do to update and not lose root or unlocked bootloader.
I need to get full functionality of my phone back asap, so I appreciate all of your help with this.
Thank you
Click to expand...
Click to collapse
This excellent guide by HomeBoy76 should give you all the info that you need....
https://forum.xda-developers.com/pixel-xl/how-to/guide-pixel-xl-android-8-1oreo-unlock-t3715279
Hobocoe said:
Hello All,
It been a while since I've been lurking on the forums. Last time I was here was just after when I got the pixel xl and needed to root and unlock it, and was looking for how to update.
Back then when the update past 7.1.1 released they were having issues keeping root and unlocked status after the update.
I'm looking to update my phone now to the newest, stable release, that will let me keep root and unlocked bootloader on a Verizon Google pixel xl.
Here is where I'm currently at:
Verizon Google pixel xl.
Rooted
Unlocked bootloader
7.1.1 (NOF27B) stock image
Flash fire installed
Twrp installed
As of late I've had the common battery issue with this version get worse as the phone ages and now after landing in Indianapolis a few hours ago I'm having radio issues that I'm hoping a fresh install or update will fix.
I'm just looking for some direction on what steps I need to do to update and not lose root or unlocked bootloader.
I need to get full functionality of my phone back asap, so I appreciate all of your help with this.
Thank you
Click to expand...
Click to collapse
I do not think there is anyway to upgrade the 7.1.1 firmware to 8.10 firmware and not lose root. I would suggest you use my guide and Do #4 wipe data and then do #7 root.
Why wipe data? There have been a lot of changes to the firmware since 7.1.1 (NOF27B) stock image.
Note: Copy/Backup the information on your internal storage you want to keep to your computer i.e., pictures SMS, files etc. Why? Because using flash-all with the -w will wipe your internal storage.
It's actually pretty simple, just download the latest factory image of either Oreo,. Flash the flash all script included with fast boot. Afterward boot into the system without setting up a pin or password or anything, set it up, then reboot into boot loader and boot the latest TWRP, then within TWRP flash TWRP zip file and Magisk root. Reboot system.
Homeboy76 said:
I do not think there is anyway to upgrade the 7.1.1 firmware to 8.10 firmware and not lose root. I would suggest you use my guide and Do #4 wipe data and then do #7 root.
Why wipe data? There have been a lot of changes to the firmware since 7.1.1 (NOF27B) stock image.
Note: Copy/Backup the information on your internal storage you want to keep to your computer i.e., pictures SMS, files etc. Why? Because using flash-all with the -w will wipe your internal storage.
Click to expand...
Click to collapse
Thank you everyone for the responses. Homeboy 76, I just had a quick question regarding your guide. The steps for the bootloader. Are you just showing all 3 options (unlock, lock, stock) for thurougness? Or do I have to return the bootloader to stock and lock it before I can install the update and root again?
Also I should test a factory reset before I try updating to see if my radio problem is worse than I expected. If I just go into the system and do a factory reset, besides losing root will it be fine doing that? Or does that get it into a weird root/stock limbo and brick it? Or prevent me from installing the update?
Thank you for your help with this. I just don't want to brick my phone while trying to fix it.
Hobocoe said:
Thank you everyone for the responses. Homeboy 76, I just had a quick question regarding your guide. The steps for the bootloader. Are you just showing all 3 options (unlock, lock, stock) for thurougness? Or do I have to return the bootloader to stock and lock it before I can install the update and root again?
Also I should test a factory reset before I try updating to see if my radio problem is worse than I expected. If I just go into the system and do a factory reset, besides losing root will it be fine doing that? Or does that get it into a weird root/stock limbo and brick it? Or prevent me from installing the update?
Thank you for your help with this. I just don't want to brick my phone while trying to fix it.
Click to expand...
Click to collapse
"...for thurougness?
Yes
Or do I have to return the bootloader to stock and lock it before I can install the update and root again?
No, Do not lock the boot loader.
Also I should test a factory reset before I try updating to see if my radio problem is worse than I expected. If I just go into the system and do a factory reset, besides losing root will it be fine doing that?
Yes
If it locks the bootloader, go here to unlock it:
[How-to] Unlock bootloader on Verizon Pixel/XL by burduli
Or does that get it into a weird root/stock limbo and brick it? Or prevent me from installing the update?
No, No.
Homeboy76 said:
"...for thurougness?
Yes
Or do I have to return the bootloader to stock and lock it before I can install the update and root again?
No, Do not lock the boot loader.
Also I should test a factory reset before I try updating to see if my radio problem is worse than I expected. If I just go into the system and do a factory reset, besides losing root will it be fine doing that?
Yes
If it locks the bootloader, go here to unlock it:
[How-to] Unlock bootloader on Verizon Pixel/XL by burduli
Or does that get it into a weird root/stock limbo and brick it? Or prevent me from installing the update?
No, No.
Click to expand...
Click to collapse
Thank you homeboy for the assistance. It's much appreciated. Luckily my phone issues were related to the location I was in. Indianapolis doesn't like my phone number for some reason.. But ill still be updating either way.
Thanks again.
Hobocoe said:
Thank you homeboy for the assistance. It's much appreciated. Luckily my phone issues were related to the location I was in. Indianapolis doesn't like my phone number for some reason.. But ill still be updating either way.
Thanks again.
Click to expand...
Click to collapse
You're welcome
Hello everybody!
I am fairly new to the modding world of android, all I know is that you need an unlocked bootloader to install a custom recovery to then root or install a custom rom. I have a specific set of questions to upgrading my phone software (Lenovo P2a42 on android 7.0):
1) Do you do anything after waiting for 14 days on the OEM unlock screen? Does it auto reset the phone, will a pop up appear, etc? Does it automatically unlock the bootloader or do I need to do adb fastboot oem unlock to finalize unlock?
2) Is there a complete all-in-one guide to installing a custom rom (bootloader unlock, TWRP, flashing, dealing with problems (encryption, fingerprint, wifi, safetynet, etc), etc) from scratch (stock rom)?
3) Is there a way I can back everything up (and recover of course, stock image and recovery, and anything else I might need to go back to factory defaults) in case I screw anything up?
4) What is the least buggiest / most popular / most supported android pie rom available for my phone (Lenovo P2a42)?
5) Anything I should know before proceeding? For example, I know it voids warranty and official support, potentially loosing google playstore, but is there anything else I should know?
I might require further assistance, as I have absolutely no experience. But hey, I gotta start somewhere right?
Thank you for your time.
1.on day 14 the option to unlock is shown in the settings menu.
2. I used this
https://forum.xda-developers.com/lenovo-p2/development/lenovo-p2-root-tool-t3800838
3.TWRP has a backup option in the Recovery menu.
Read the TWRP threads to understand better.
4.for me I like 8.1
https://forum.xda-developers.com/lenovo-p2/development/rom-aospextended-rom-v5-4-t3774641
But am currently using 9.0
https://forum.xda-developers.com/lenovo-p2/development/rom-arrowos-9-x-t3862818
5.anything else to know?
Just make sure you read the thread for whichever ROM you use.
And then enjoy
Treboeth said:
1.on day 14 the option to unlock is shown in the settings menu.
2. I used this
https://forum.xda-developers.com/lenovo-p2/development/lenovo-p2-root-tool-t3800838
3.TWRP has a backup option in the Recovery menu.
Read the TWRP threads to understand better.
4.for me I like 8.1
https://forum.xda-developers.com/lenovo-p2/development/rom-aospextended-rom-v5-4-t3774641
But am currently using 9.0
https://forum.xda-developers.com/lenovo-p2/development/rom-arrowos-9-x-t3862818
5.anything else to know?
Just make sure you read the thread for whichever ROM you use.
And then enjoy
Click to expand...
Click to collapse
The 8.1 rom you provided is AOSPExtended, is there a 9.0 version of it for the P2a42?
Thank you for your time.
404 Name Not Found said:
The 8.1 rom you provided is AOSPExtended, is there a 9.0 version of it for the P2a42?
Thank you for your time.
Click to expand...
Click to collapse
I believe 9.0 is being worked on,it has been released for other phones.
Glad to help
It have tried endless times trying to get root access via magisk by patching my retail Canada boot.img file. My phone has an unlocked bootloader and I definitely have the right boot image as I tried another boot image from another firmware and got a startup failure which I fixed by flashing the retail Canada boot.img. It patches okay and flashes okay (except for message "image signed with key bad key") but no root access and no installed Magisk. If anyone has a solution, has gained root access some other way or knows for a fact that magisk does not work with this model phone I would be very interested to know. This is the firmware I used the boot file from : XT1952-4_CHANNEL_RETCA_9.0_PPY29.105-57
Thanks
Bad Key is normal after you unlock the boot loader. Have you tried side loading the Magisk apk along with a copy of the boot.img and have the app mod the boot.img? Then move the modded boot image back to your pc and fastboot it on to the phone. That's what I did with my G7Power.
Side loading
Not sure what side loading is but I did patch the boot file with Magisk manager, put it on my PC and fastbooted it to my phone with no results. The ROM for the G7 Play is different than older androids. I tried to create a makeshift recovery for it but my ROM does not have a recovery.img or other older android ROM files for that matter. I will have to wait for some kind of workaround for magisk or someone takes on the challenge to create a recovery for the different file system. I installed a recovery for my Moto G4 plus and rooted no problem. I should have researched more before I purchased the G7 Play and unlocked the bootloader so now I am at the mercy of development.
Thanks for your reply.
Nothing
I tried rooting the phone with the Magisk... Nothing.
I tried to relock the bootloader... Nothing.
What works on the other Moto G7s does not work on our G7 Play.
Hello,
relocking Moto G7 play:
* first reflash the 'boot.img' from the correct firmware file - 'fastboot flash boot boot.img' (in the Internet there are official images to the smartphone)
* then you can lock the bootloader again with 'fastboot oem lock'.
"bad key" is gone, SafetyNet test passed and OTA is working again.
Best regards
realsine said:
Hello,
relocking Moto G7 play:
* first reflash the 'boot.img' from the correct firmware file - 'fastboot flash boot boot.img' (in the Internet there are official images to the smartphone)
* then you can lock the bootloader again with 'fastboot oem lock'.
"bad key" is gone, SafetyNet test passed and OTA is working again.
Best regards
Click to expand...
Click to collapse
Do you have a g7 play and did that? So show us because I could not.
When you use this command an error occurs because the "oem unlocking" option is not checked. And it is not checked because the system disables this option after we unlock the bootloader.
So, unless there is another way to check this option, it's not possible to relock the bootloader. That's what I think.
Marcondes BR said:
Do you have a g7 play and did that? So show us because I could not.
When you use this command an error occurs because the "oem unlocking" option is not checked. And it is not checked because the system disables this option after we unlock the bootloader.
So, unless there is another way to check this option, it's not possible to relock the bootloader. That's what I think.
Click to expand...
Click to collapse
Yes, I have a Motorola Moto g7 play.
When I open the bootloader, I can't close it immediately. I get a "bad key" (or something like that). I have to flash the matching original boot.img first.
So in the bootloader:
* fastboot flash boot boot.img
And if that was successful, then afterwards (without restart)
* fastboot oem lock
Possibly the last command must be entered a second time, but this will be output when
If the command works, then the smartphone boots automatically at this point and the bootloader is closed again.
I assume that you have the correct boot.img and must flash.
I have performed this procedure several times successfully.
Information: at every LOCK and at every UNLOCK the data is reset (Factory reset?).
relock bootloader confirm
I can confirm this does work. I just relocked and unlocked my bootloader with those instructions. Again if anybody has successfully rooted this phone I would love to know.
Any update on this ? I would love to buy this phone but not till I know for sure that it can be rooted.. Any insight into this would be greatly appreciated !!
thetesterman said:
Any update on this ? I would love to buy this phone but not till I know for sure that it can be rooted.. Any insight into this would be greatly appreciated !!
Click to expand...
Click to collapse
This device is definitely rootable -- there is no doubt as to proof of concept. It's just a matter of a viable root method being ironed out. The developer of Magisk (topjohnwu) has stated that the current difficulty with installing systemless root on the Moto G7 Play (via patched boot image) is due to the particular A/B partition index of the device. He is actually working on a universal resolution now. It also appears that TWRP custom recovery is being compiled by the guys over at TeamWin, not to mention unofficial builds being compiled by other dedicated devs (which will likely come first). I went ahead and bought a G7 Play and am just patiently waiting for the imminent resolution for root, TWRP, and hopefully, full-on ROM development. In other words, it's not a matter of if; it's just a matter of when.
I expect the devs to release an unofficial version of twrp soon for g7 play. I already tried the same thing with patching my boot img and flashing in fastboot but still no dice. Just bought the the phone so I hope it gets released soon so we can finally root!
avf90m said:
I expect the devs to release an unofficial version of twrp soon for g7 play. I already tried the same thing with patching my boot img and flashing in fastboot but still no dice. Just bought the the phone so I hope it gets released soon so we can finally root!
Click to expand...
Click to collapse
Amen to that.
Root is all that this phone needs. It's amazing. I'm so happy with it. I can't believe what you get for the price. Why would you buy anything else?
If someone can confirm the current root method for the g6 play could work with the g7 play id happily make a guide for y'all at least. If assuming this device also auto encrypts. Try just booting twrp first, press cancel, swipe right to allow system modifications, go to wipe, push the format button next to the advanced wipe button, type yes, go back into bootloader and flash twrp and internal storage should be readable from there adb push the encryption disabler then magisk. And just in case someone here trys to use the twrp for the g6 play I'm feeling you now it won't work in case that needs to be said. Try using magisk beta also if stable doesn't work I noticed we had to use beta for a little bit before we could use stable
LexusBrian400 said:
Root is all that this phone needs. It's amazing. I'm so happy with it. I can't believe what you get for the price. Why would you buy anything else?
Click to expand...
Click to collapse
Couldn't agree more, fantastic phone ( wish it had wireless charging though ) and all I need is root.
ninjakira said:
If someone can confirm the current root method for the g6 play could work with the g7 play id happily make a guide for y'all at least. If assuming this device also auto encrypts. Try just booting twrp first, press cancel, swipe right to allow system modifications, go to wipe, push the format button next to the advanced wipe button, type yes, go back into bootloader and flash twrp and internal storage should be readable from there adb push the encryption disabler then magisk. And just in case someone here trys to use the twrp for the g6 play I'm feeling you now it won't work in case that needs to be said. Try using magisk beta also if stable doesn't work I noticed we had to use beta for a little bit before we could use stable
Click to expand...
Click to collapse
The G6 Play root method will not work on the G7 Play. The G7 Play uses the A/B partition index. There are currently a few developers ironing out a viable root method and also working on a stable TWRP build. Many Moto G7 Play owners have hard bricked their devices by trying root strategies intended for devices with standard GPT partition tables.
I only recently bought my G7 Play and I am curious as to whether my firmware version is all the way up to date. I have the Boost Mobile variant (xt1952-4) and I'm on the PCY29.105-59 firmware build with a March 1, 2019 security patch level. According to my System Update check in Settings, this is the current build. However, it would seem that with a device so recently manufactured, there would be a more current firmware version available. Are there any Sprint, Virgin, or Boost variant owners who can clarify this? And I apologize if this is off topic.
Viva La Android said:
I only recently bought my G7 Play and I am curious as to whether my firmware version is all the way up to date. I have the Boost Mobile variant (xt1952-4) and I'm on the PCY29.105-59 firmware build with a March 1, 2019 security patch level. According to my System Update check in Settings, this is the current build. However, it would seem that with a device so recently manufactured, there would be a more current firmware version available. Are there any Sprint, Virgin, or Boost variant owners who can clarify this? And I apologize if this is off topic.
Click to expand...
Click to collapse
I'm on OPENMX channel and there is currently a June 1st update waiting to be installed. I'm reluctant to install it because I don't know if it will interfere with the root process down the line.
GatoDeNieve said:
I'm on OPENMX channel and there is currently a June 1st update waiting to be installed. I'm reluctant to install it because I don't know if it will interfere with the root process down the line.
Click to expand...
Click to collapse
Ok thanks for the info. I would guess an OTA update for my variant is imminent within the next couple of weeks at least.
Motorola is not in the practice of patching root exploits via OTA updates. The company actually supports both OEM Unlocking and Android development. I don't think you would have any future issues with root by installing your pending OTA. But at the same time I don't blame you for holding off. When in doubt, don't update. Again, I do thank you for the info.
The xt1952-4 (Sprint, Boost, Virgin) variant is rolling out with PCY29.105-134 with June 1 security patches. I just got notification about ten minutes ago.
Having issues installing beta 3.3 on my 6 pro.. did a factory reset then tried installing it. First time it took forever to install and phone rebooted and had missing operating system so I had to factory reset.. second time I got a failed to install message.. rebooted the phone and it said no operating system please visit this link from another device.. rebooted then phone worked normal.. what is going on here ? Phone is purchased from att, so idk if it's considered global version but whatever either way . Is there something stopping it from being installed? Was trying to do all this OTA.. thanks kinda new to it
I'm not sure if it being an att version has anything to do with it or not.. maybe the version google releases is only working on unlocked global models?? Someone shine some light on this..
You can use https://flash.android.com/ to flash with a computer.
So why would the flash tool work but not the ota method ?? Really curious cause when the official comes out hopefully I can flash that ota without any issues.. right now I opted out of the beta cause I really want the ota method to work and it doesn't ..
Can someone tell me why the ota wouldn't install ? Installed it the way I installed any other update on the phone through check for updates.. Id rather get ota working vs hassling with a computer to install it. That can mess things up if done wrong .
Is it failing to ota install the beta cause of a locked bootloader ? It does fine with install ota security patches on Android 12. Trying to install 13 ota on the phone itself fails.. I don't see why that would be though ?
@Redbeardkevv Welcome to XDA. Instead of posting multiple times in a row, please use the Edit button to edit your post and just add to it, in the future.
Official Google Android Flash Tool (OEM Unlocking needs to be toggled on - you may not have to manually unlock the bootloader - the "site" will do that on its own)
^ That Google site has saved many users on XDA. It has revived or corrected a mistake on their devices (mine too, once) when even flashing the full factory image didn't fix the problem. I have no idea what exactly it does that manually flashing doesn't. I normally use the full factory image zip, and that alone sometimes fixes issues that users have when they have issues flashing via the OTA method.
Oem unlocking toggled on isn't an option on this phone , purchased at att . I'll just wait till they release the official ota. But what would of been holding it up and making the installs corrupt??
Redbeardkevv said:
Oem unlocking toggled on isn't an option on this phone , purchased at att . I'll just wait till they release the official ota. But what would of been holding it up and making the installs corrupt??
Click to expand...
Click to collapse
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developer.android.com
Important excerpt:
Android Flash Tool guides you step-by-step through the process of flashing your device—there's no need to have tools installed—but you will need to unlock your device and enable USB Debugging in Developer options.
Click to expand...
Click to collapse
If I remember correctly from other AT&T variant Pixel 6 Pro users in this section, once you pay off the phone and/or own the phone for long enough, AT&T should carrier unlock the phone, and that will likely make it so that you can OEM Unlocking and unlock the bootloader. (this also applies to T-Mobile, but does not apply to Verizon)
Well it's a far ways from being paid off I'll just add that .. what are my flashing options ? Also why would a security patch install just fine, then I enroll into beta ,try to install it, and bam it won't install and is corrupt install. Just doesn't seem right to me.. should I just wait until official release early August and then the OTA install from phone will work ?
Why would a security patch install without any issue , but I go to install this beta 13 and it fails and is corrupt . Same method as installing a security patch , only difference is beta won't install . Will it install correctly OTA when they release the final version in August ???
Redbeardkevv said:
Why would a security patch install without any issue , but I go to install this beta 13 and it fails and is corrupt . Same method as installing a security patch , only difference is beta won't install . Will it install correctly OTA when they release the final version in August ???
Click to expand...
Click to collapse
Firstly, unlocked bootloader is required to flash custom or beta firmware. While you can sideload OTA packages on a locked bootloader, I would highly recommend against doing so as you may end up with no way to recover your device.
When installing a beta, it is generally best to wipe and perform a clean flash. OTA is not recommended because beta software by nature is not yet suitable for public release, and may not appropriately handle everything correctly coming from older firmware.
As has been mentioned before, I recommend you use the Android Flash Tool to flash the beta. To ensure you have a fresh start, tick the Wipe device and Force flash all partitions boxes. Do not re-lock the bootloader.
So in short, wait for the official ota to roll out in August and install from phone then?? Cause I won't be able to unlock bootloader , phones not paid off... Would this explain why it's failing to install an beta from within the phone itself cause the bootloader's locked? So I have to wait for official ota rollout like I said earlier ??
Redbeardkevv said:
So in short, wait for the official ota to roll out in August and install from phone then?? Cause I won't be able to unlock bootloader , phones not paid off... Would this explain why it's failing to install an beta from within the phone itself cause the bootloader's locked? So I have to wait for official ota rollout like I said earlier ??
Click to expand...
Click to collapse
Most likely. I doubt the beta will pass signature verification until it is updated to public release.
So not passing signature verification would be the reason it won't install ( ota ) most likely ? I'm just confused why a patch will install ota but the beta cannot .. must have something to do with bootloader being locked and it not being an official verified release or something
Just curious
Redbeardkevv said:
Just curious
Click to expand...
Click to collapse
Yes, you need the bootloader unlocked. So you cannot use those builds - only officially released OS builds.
NippleSauce said:
Yes, you need the bootloader unlocked. So you cannot use those builds - only officially released OS builds.
Click to expand...
Click to collapse
Well that explains it not installing and saying corrupted install ... Lol
Redbeardkevv said:
Well that explains it not installing and saying corrupted install ... Lol
Click to expand...
Click to collapse
It's a beta, so there will be issues for sure (but your last comment said you are getting an error [device is corrupt] that was common a few months ago so read on). You don't need to have an unlocked bootloader to enroll in the beta. Tons of users on Verizon and AT&T with a locked BL have installed the beta. Most are fine, some have had issues.
I wouldn't install a Beta on a locked BL. Why risk it? If something goes wrong, you'll need to get a warranty replacement. Seems like such a hassle.
For your issue, since you said you're getting a device corrupt message. This message is caused by q few different things (there's a thread on here about it). To fix it, users needed to do a factory reset in recovery mode. If you really wanted to try installing the beta (and you understand the risks), you'd probably need to: go to recovery mode and perform a wipe/factory reset.
From there, you could install the latest stable ota (via recovery mode) then see if the beta will update for you (via beta enrollment like you are trying to do), or directly flash the beta ota (link below). I'm just not sure if you can flash a beta ota image, over a stable build. I haven't tried it but according to xda, you can be on Android 12, and flash the Beta 13 ota (instructions found here).
There's two ways to flash an Android image: ota builds via recovery mode (doesn't require BL unlock) and factory image via fastboot which can be done manually or using Google's web flash tool (flash.android.com) - both if these require BL unlock.
You can find all the latest image downloads here. Google strongly recommends to flash the beta with an unlocked bootloader using their flash web tool. It's a beta so I would stay away until you can unlock your bootloader. Don't risk it. But I still think it might be a good idea for you to eventually perform a factory reset from recovery mode, since you are seeing the device is corrupt error message.
Had same problem, tried installing it twice and gave up