Related
My kernel would have only what's needed. However users can request a feature and if i find it worthy i would test it and add.
I am keeping short and writing the features i have added so far !
FEATURES:
V 1.4 : [ As of now only CM based ]
Switched to latest CM13 source base
Voltage control
More refined sandy charger control
Tuned elementalx governor
Darkness governor
Kcal tweaks
FIOPS & SIO added
Compiled with latest uber toolchain
Other tweaks from my end
V 1.3 :
FIOPS scheduler added
Tuneups to interactive governor
Changes to elementalx and it's tunables.
Solves potential MTP mode USB issues and sound issues.
Full synapse support added ( Doesn't directly come inside from my kernel. You will have to flash separately ). Thanks to @yarpiin
More thermal changes
Lot more in store
To download synapse flashable zip refer third post
Please install CM camera next mod which is also available under downloads section. Just install it as normal apk. Hotplug has video rec freeze on stock OP camera. Blame Oneplus for it.
V 1.2 :
Sandy charger control. Now charge your op2 much faster than stock ( Use synapse or updated kernel adiutor app [available in my downloads,not playstore of kernel adiutor] to enable it and control )
Intelliplug. Use it wisely and according to ur usage
Initial support to synapse ( The bulk needs to be still controlled via Kernel Adiutor )
Initial attempt at porting Faux Sound control ( It's not working completely yet. Will be fixed soon )
Merged with latest Oxygen 2.1 source
Plenty of other features hidden.
Initial release :
Compiled with Sabermod gcc 4.9 toolchain
Powersuspend with different modes
USB Fast charge
Intelligent cpuquiet hotplug framework ( Based on NVDIA and tuned to msm )
ElementalX governor from flar ( with latest patches )
Kcal control ( colour control driver by savoca )
Fsync on/off support
BFQ I/O scheduler added
Thermal code tweaked heavily ( device should stay at it's coolest )
Optimized for best performance and battery ( you can get some of the best results )
Smoothness guaranteed
Rcu,sched,mm and other various enhancements
There are plenty more hidden ! Just use and experience the kernel. Don't forget to post your reviews
I can only say that you can get one of the best experiences with probably no real bugs !
Recommended app :
Kernel Adiutor by grarak
Downloads :
Sandy kernel for One Plus two
Installation guide :
Download the zip
Reboot to recovery ( custom recovery )
Flash the zip
Enjoy sandy kernel on one plus two
Credits :
@grarak - For the code base and for his time. Nice guy to speak with
And to everyone else, whose code i have used.
Tester credits :
@Skybark - For testing. Nice guy to speak with as well. Thanks mate !
XDA:DevDB Information
Sandy Kernel for One plus two, Kernel for the OnePlus 2
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/sandy_oneplus2_msm8994
Kernel Special Features: [Fast Charge] | [ Elementalx] | [Darkness ] | [ Ice cool thermal]
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2016-02-25
Created 2015-09-04
Last Updated 2016-04-28
FAQ's
Q : Will this work on all ROM's ?
A : It will work bugless in Oxygen OS, but could give you bugs in CM or CM based ROM's ( as they are under alpha stage )
Q: OMG ! Baettaryyy SUCKZ ! STAPH putting lame kernels
A : My kernel is intended for battery and performance. I have no intention to build a kernel for battery draining. Your drain comes from your location apps,wake locks,etc. Use App ops or servicely app and check damn wakelocks & keep awake of your apps ( Play services, Maps, facebook,etc )
Q: What governor do you suggest ?
A : I have included only one governor ( elementalx ) other than stock and hence i would suggest you switch to it if it's not pre-switched after flashing.
Synapse link
Synapse flashable zip
Tested and all I can say is to flash that s#it!!Smoothness overloaded.Awesome power management!
5* rating
Tapped from my ①+②=❸
Well looks good but you havent stated is it for CM12.1 or Oxygen ?
Will it work with CM12(BETA) and Oxygen OS 2.0.2?
yarpiin said:
Well looks good but you havent stated is it for CM12.1 or Oxygen ?
Click to expand...
Click to collapse
Works great on OOS 2.0.2!
ebanreb37 said:
Will it work with CM12(BETA) and Oxygen OS 2.0.2?
Click to expand...
Click to collapse
Tapped from my ①+②=❸
Great !!! will try
Reserved for my tweaks.. Thanks for the kernel.
From lettuce with LiquidSmooth ROM and Sandy Kernel
vaisakh7 said:
Works great on OOS 2.0.2!
Tapped from my ①+②=❸
Click to expand...
Click to collapse
camera force close, mp3 error, all big cores always on?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
No issues!Camera works fine,MP3 works fine,cores are shut down on light usage(thanks to CpuQuiet hotplug).
Tapped from my ①+②=❸
Works great~~ still testing the fast charge~ tho is it possible to have westwood tcp congestion or others perhaps?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
You mean you face this ?
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
Seems like a recurring theme with these early OP2 kernel attempts..
return.of.octobot said:
Seems like a recurring theme with these early OP2 kernel attempts..
Click to expand...
Click to collapse
These are not there in this kernel ! [ He was just questioning if it is there ]
Santhosh M said:
These are not there in this kernel ! [ He was just questioning if it is there ]
Click to expand...
Click to collapse
Gotcha, definitely appears to be the most competently developed one we've seen thus far.
Am I to assume that the lack of included governor list indicates that it's the same as stock? I could really dig me some smartmax..
return.of.octobot said:
Gotcha, definitely appears to be the most competently developed one we've seen thus far.
Am I to assume that the lack of included governor list indicates that it's the same as stock? I could really dig me some smartmax..
Click to expand...
Click to collapse
Heavily tweaked elementalx should satify your needs
Tapped from my ①+②=❸
Luigi_2 said:
camera force close, mp3 error, all big cores always on?
Click to expand...
Click to collapse
Can you verify if this is true?
ebanreb37 said:
Can you verify if this is true?
Click to expand...
Click to collapse
This isn't true.I've been a tester and I can assure that these issues doesn't exist!
Tapped from my ①+②=❸
vaisakh7 said:
Heavily tweaked elementalx should satify your needs
Tapped from my ①+②=❸
Click to expand...
Click to collapse
does elementalx efficient in terms of battery?
Dirty Unicorns 6.0.1 is probably the best marshmallow rom for amami so far , although it has some problems: camera app cannot take pictures at 20.7mp, and exfat-formated sdcard is not supported.
So I made a kernel to fix these problems. You can flash with twrp or flashfire.
Kernel_Amami_AOSP_6_20160709.zip contains aosp kernel built with exfat-nofuse and some other features, as well as other executables or libraries needed to identify and mount exfat(vold , blkid etc.) This may work with other aosp 6.0.1 based roms, but I never tried by myself.
2016.06.18 : I ported some features from other kernels like M5 kernel. Features included:
1. Various cpufreq governors, hotplug drivers and i/o schedulers
2. KCAL color control by @savoca
3. Faux Sound Control V3
4. CPU/GPU OC & UV
5. Vibrator intensity control
6. Ultra-ksm
7. Kexec-hardboot
8. Dynamic Fsync 1.2
9. Mac80211 injection patch and HID patch for keyboard support
10. Sysfs interface to Enable / Disable CRC on the data blocks
11. Exfat and Paragon NTFS(UFSD)
12. Zram
13. Merge upstream patches up to 3.10.102
MtkCamera.zip contains camera app from Mediatek devices with lollipop. It can take 20.7mp photos(3936 x 5248) and has some useful features like visual effects and qrcode scanner.
Modified kernel source : https://github.com/KuronekoDungeon/android_kernel_sony_msm
Download : https://drive.google.com/folderview?id=0B-DoK6BdpB2fZEZ5eG5NcnhYNFU&usp=sharing
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
levone1 said:
If you're interested, Myself5 is willing to release M5 for Amami, but needs a maintainer, since he doesn't have a Z1c anymore. Maybe you can work with him on M5 for AOSP...
Click to expand...
Click to collapse
Is he working on a 3.10.9x kernel ?
maz-1 said:
Is he working on a 3.10.9x kernel ?
Click to expand...
Click to collapse
This is from main thread latest version...
levone1 said:
This is from main thread latest version...
Click to expand...
Click to collapse
cool, I guess I will be a tester then.
maz-1 said:
cool, I guess I will be a tester then.
Click to expand...
Click to collapse
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
levone1 said:
He did say that testers won't really help. Without a device of his own, he'll need a maintainer.
Click to expand...
Click to collapse
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
maz-1 said:
Well, I mean I will build, test and submit fixes if possible. But I'm afraid I don't have the time and knowledge to take over all the maintenance. Any other volunteers?
Click to expand...
Click to collapse
maybe we can jointly maintain ?
CLINTZ9 said:
maybe we can jointly maintain ?
Click to expand...
Click to collapse
Sounds good.
maz-1 said:
Sounds good.
Click to expand...
Click to collapse
cool !
CLINTZ9 said:
cool !
Click to expand...
Click to collapse
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
John.D.. said:
Hi, I install this, work well, but camera still laggy . What do you think, how else you can improve the image processing? The picture was much too sharp ... but it's better than before.
And...you can also add in your kernel any functions like as KryptonianKernel or AdvancedKernel
Click to expand...
Click to collapse
Laggy camera is a driver issue, just wait until sony updates software binaries for amami.
Hmm, why you delete MTKCamera? You have another app for taking photo in 21mp?)
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
maz-1 said:
MTKCamera cannot use frontcam. I think @SpiritCroc will try to add 20.7mp option to SnapdragonCamera, so wait for a new release.
Click to expand...
Click to collapse
I already added it, will probably be in next weekly
maz-1 said:
I've already ported a bunch of features to aosp kernel, just check out the commit history.
What left to be done : GPU governors, A few hotplug drivers/cpufreq governors not ported(hotplug : alucard , mako , intelliplug , cpufreq : HYPER, OndemandPlus, Nightmare , ElementalX, maybe more) , some of these features need to be modifeid or abandoned.
Click to expand...
Click to collapse
check your whatsapp inbox
What's 'jhead exif fix' file in your Gdrive link?
levone1 said:
What's 'jhead exif fix' file in your Gdrive link?
Click to expand...
Click to collapse
libjhead with this patch :
https://gist.github.com/updateing/2b58ebd4a8c75780443f28f514e9bb39
Photos token by Android N may contain wrong exif infomation and cause app crash on marshmallow/lollipop.
need help - CPU GOVs and frequencies
Hi,
first of all thanks for the kernel! I'm just migrated from RR Lollipop to MM DU ROM (today to the build of 17. June). I have strange issues with the kernel.
I can not change the CPU govs. More critical: The minimum CPU frequency is shown to be 1.8 GHz. Whatever I try, I cannot get the values gov/freq to stick.
Always when I reopen an tuning app, the settings are reverted.
Root seems to work fine. Also tried to disable SE-linux via terminal ("setenforce 0"). The same.
(Combinations I tried: kernel audiutor, performance control, system tuner... also on DU (3. june) + kernel (5. june)
Can somebody help me out?
Who can permanently adjust the CPU settings on DU with/without this kernel?
Thanks in advance!
Features:
1.PUBG Runs Smoothly:laugh:
2.GPU Overclocked To 710mhz
3.CPU Overclocked To 2.3ghz BIG & 1.8gz SMALL cores
4.ZEN Io
5.Intellithermal
6.Westwood TCP Algorithm
7.Simplified Thermal Configuration
I Also Modified Its Thermal Properties To Make It Run Cooler On Our Device:laugh:
All Work Is Based On Void 5.4 Kernel For Z2 pro by @void23
Many many thanks to @void23 for the original development
Full Details About The Kernel Can Be Found In The Void Kernel Thread Given Below
https://forum.xda-developers.com/zu...kernel-z2-pro-kernel-gpu-oc-zen-f2fs-t3661822
Note:
As Its Overclocked So Battery Life May Be Lower If You Want More Battery Life Then Use An App Like Kernel Auditor To Underclock The Frequency To 2.15ghz BIG, 1.6ghz LITTLE & 624mhz for GPU
Also Let The Kernel Settle For A Couple Of Days Before Posing Any Issues
Recommended To Be Used With This Thermal Mod To Prevent Overheating
https://forum.xda-developers.com/lenovo-zuk-z2/themes/treble-treble-ubercool-thermal-mod-t3784947
Hit Thanks If You Loved It
Download Link(Treble)
https://drive.google.com/file/d/1wHYQbw2ttTYQSzmlgJN23PvePWH9wvZS/view?usp=drivesdk
Sources
https://github.com/virtvoid/android_kernel_zuk_msm8996-1
https://github.com/virtvoid/android_kernel_zuk_msm8996-5
treble?
boluoot said:
treble?
Click to expand...
Click to collapse
Treble Only
thx
AstroBiswas said:
Treble Only
Click to expand...
Click to collapse
Make it for non treble also !!
make one for non treble
Please add a sound control
What's the Linux Kernel Version? 5.4 or 3.18.x?
1a2b257 said:
What's the Linux Kernel Version? 5.4 or 3.18.x?
Click to expand...
Click to collapse
3.18
Nice,
but add Credits to the Void Kernel guy and his original Credit list also and also while you post a Kernel in XDA you should put Kernel Source link that you have used else it is against XDA rules.
With Regards
KuberSharma
Nice work
kashyapp said:
Make it for non treble also !!
Click to expand...
Click to collapse
zakaria12 said:
make one for non treble
Click to expand...
Click to collapse
It Has Been Worked Upon But Is Untested Do Comment Your Review After Installation
Non-Treble Version Released With Some Changes
-upstreamed to .107
-added zen IO scheduler
-updated some governers
-new thermals
-and some more stuff
Download Link Given In Op
Initial Installers Do Comment How Does It Work. I Have A Treble Rom So Its Untested By Me
AstroBiswas said:
Non-Treble Version Released With Some Changes
-Sound gain fixed
-Upstreamed to .107
-added zen IO scheduler
-added CAF active governer
-updated some governers
-new thermals
-and some more stuff
Initial Installers Do Comment How Does It Work. I Have A Treble Rom So Its Untested By Me
Click to expand...
Click to collapse
new trees or old trees ?
thehumanx said:
new trees or old trees ?
Click to expand...
Click to collapse
New Trees
Wtaf
Kanged bfr 3.6 changelog.
So it's a renamed bfr? And reuploaded?
??
amog787 said:
Wtaf
Kanged bfr 3.6 changelog.
So it's a renamed bfr? And reuploaded?
Click to expand...
Click to collapse
Its Based On Void Not Bfr
i am unable to flash the non treble zip files.
error occured.
locolyric said:
i am unable to flash the non treble zip files.
error occured.
Click to expand...
Click to collapse
Send the screenshot of twrp showing error
UPDATES PAUSED FOR A FEW MORE WEEKS DUE TO PERSONAL REASONS.
DISCLAIMER
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Just to be on the safer side - please restore to stock boot.img or dirty flash your rom before flashing this!
DESCRIPTION
Dark-berry , developed based on stock kernel itself and added some additional governors and wakelocks blockers [thanks to boeffla wakelock blocker] to make sure device doesn't compromise on battery whilst performing . Any kernel auditor can be used to Tweak.
KERNEL FEATURES:
Upstreamed to Latest linux stable version 4.4.161
UC on both clusters. [Hard-limited to 300mhz based on power suspend]
Added Headphone Gain [Elementalx]
Some more IO schedulers.
kcal control support , backlight dimmer.
Vibration control
USB Fast charge support.
File System Stability.
Adreno idler.
Fingerprint responsiveness boost.
Enhanced deep sleep.
Power suspend.
XDA:DevDB Information
DARK BERRY, Kernel for the Asus ZenFone Max Pro M1
Contributors
kenway66
CHANGE LOGs
CHANGE LOG v1,v2,v3:
These builds were Buggy and kickstarter for DARK-BERRY . Mostly Stock features.
And accessible only by some testers.
So , no reason for publishing change log.
CHANGE LOG v3t:
Usb fast charge support
Adreno idler
Fingerprint responsiveness boost
Enhanced deep sleep
Filesystem stability
Power suspend
CHANGE LOG v4:
Upstreamed to 4.4.150
Kcal color tuner , backlight dimmer
Power suspend tweaked
Added new cpu governors barry_allen , bioshock
Added Headphone sound control
Added fsync control
CHANGE LOG v5:
-Upstream to Linux 4.4.153
-Built with linaro-7.3.1-2018.05
-Merge latest CAF tag for Oreo [LA.UM.6.2.r1-10500-sdm660.0]
-QCACLD Upstream
-cpu input boost & devfreq boost tweaks implemented [improved app opening speed?]
-Fixed ui stuttering for some custom roms
-Interactive Governor tweaks
-Many more under the hood changes/tweaks.
CHANGE LOG v6[ACETIC-ASTONISH] :
Compiled with clang DragonTC Clang-8
Removed performance hotplug
Better wakeup from deep sleep
UV on both big and little cluster
Adreno boost
Tweaked adreno idler
Limit gpu frq for unnecessary task at bootup
Tweaked idle timeouts
Force fc
Fingerprint response improvement
Spectrum support
F2FS SUPPORT
Disabled some more wakelock by default.
Some other under the hood changes.
CHANGE LOG v7 [BIONIC-BEFUDDLE]:
Upstreamed to 4.4.157.
Better deep sleep.
Fingerprint issues fixed.
Dt2w support by default.[Rom should support it.]
Better tweaked Spectrum profiles.
Removed unnecessary features.
Some other optimisations.
CHANGE LOG v8 [CATASTROPHIC-CARBONITE]:
Upstreamed to 4.4.161
Spectrum Profile Tweaks
Added Headphone, microphone ,earpiece gain
Some other Optimizations
KERNEL SPECIAL FEATURES:
1] based on stock kernel ,
2] added governors [ alucard ,darkness, blue active, nightmare etc..] ,
3] boeffla wakelock blocker , Better Deep sleep.
4]FP Boost.
5]UV,QuickWakeup .......and many more.............
INSTALLATION
Assuming You have Unlocked device and custom recovery flashed!
--> First, BACKUP your BOOT.img [just to be on the safer side.]
--> Go to custom recovery [hopefully, TWRP or RWRP]
--> Select the zip file , Swipe to flash
--> Done
DOWNLOADS
|-----Đ₳Ɽ₭-฿ɆⱤⱤɎ-----|Download
NOTE:
Can use greenify for even better results.
NOW SUPPORTS SPECTRUM!!!!!
Version Information
Status: Stable
Current Stable Version: v8 [CATASTROPHIC-CARBONITE]
SOURCE CODE
https://github.com/BHARATHCK/XOOTD_DARK-BERRY_KERNEL
BUG REPORT :
Telegram username : BHARATHCK
FEEL FREE TO ASK ANY QUERIES or FEATURE IMPLEMENTATION in this thread or above mentioned telegram un.
Created 2018-08-11
Last Updated 2018-08-11
Like my work? Consider hitting the thanks button!!!!!!!
Are dt2w and dt2s available?
abuzahwa said:
Are dt2w and dt2s available?
Click to expand...
Click to collapse
Nope.
But if need be , will include it.
Next build.
kenway66 said:
Nope.
But if need be , will include it.
Next build.
Click to expand...
Click to collapse
Ok, that will be amazing, something very good
abuzahwa said:
Ok, that will be amazing, something very good
Click to expand...
Click to collapse
Eats up battery , touchscreen has to be active all the way.
kenway66 said:
Eats up battery , touchscreen has to be active all the way.
Click to expand...
Click to collapse
If it's like a stock Rom, I don't think it's a problem
V2.1 akses Rejected on gdrive
abuzahwa said:
V2.1 akses Rejected on gdrive
Click to expand...
Click to collapse
Will be available today.
Bugs detected.
V2 has no bugs though!
Does it support for Android P?
abuzahwa said:
Does it support for Android P?
Click to expand...
Click to collapse
Didn't test.
currently meant for oreo roms.
Is it possible to add Adreno Idler to stock based kernel?? If yes then Dev maybe you should give a try to it...
Will help to save some juice....Well theres not a heatup issue encountered till now, but maybe usefull?
What do you think??
Sent from my [device_name] using XDA-Developers Legacy app
kenway66 said:
Didn't test.
currently meant for oreo roms.
Click to expand...
Click to collapse
Deep sleep not work on Stok Rom brother
Dry_ice808 said:
Is it possible to add Adreno Idler to stock based kernel?? If yes then Dev maybe you should give a try to it...
Will help to save some juice....Well theres not a heatup issue encountered till now, but maybe usefull?
What do you think??
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes , in today's build.
not sure if it makes much difference .
You can try testing it.
abuzahwa said:
Deep sleep not work on Stok Rom brother
Click to expand...
Click to collapse
Issue has been fixed , today's build will be fine.
kenway66 said:
yes , in today's build.
not sure if it makes much difference .
You can try testing it.
Click to expand...
Click to collapse
Sure ill... Thanks for it [emoji4]
Sent from my ASUS_X00TD using XDA-Developers Legacy app
V3 OUT!
change log:
Usb fast charge support
Adreno idler
Fingerprint responsiveness boost
Enhanced deep sleep
Filesystem stability
Power suspend
Check op for download link.
kenway66 said:
V3 OUT!
change log:
Usb fast charge support
Adreno idler
Fingerprint responsiveness boost
Enhanced deep sleep
Filesystem stability
Power suspend
Check op for download link.
Click to expand...
Click to collapse
Don't you make a channel on Instagram?
abuzahwa said:
Don't you make a channel on Instagram?
Click to expand...
Click to collapse
Nope!
Did u mean telegram?
I dont think i need it.
kenway66 said:
Nope!
Did u mean telegram?
I dont think i need it.
Click to expand...
Click to collapse
Yeah telegram I think it will make it easier
abuzahwa said:
Yeah telegram I think it will make it easier
Click to expand...
Click to collapse
Updated the op with my telegram username.
Can report the bugs over there.
if need be a group will be created.
I am very happy here in this time the device is released more than two years, it probably means we have been with our phone for years.
also LoverOriented Kernel still be here, I am honored if you flash this kernel on your device.
For the builds for MIUI PIE, please follow my telegram channel:
MOD EDIT: TG link removed
Features:
Based on latest caf pie tag with latest ACK upstream merged
FULL support for MIUI userspace(OTA, nightmode, vibration tweaks.....)
PELT EAS which backported from android-4.14
Effective use of userspace perf boost under EAS, make it works with dynamic sched boost
Build with the newest Clang 10 with Polly and LTO optimization
Port ALL optimizations from sultanxda's kernel, and up-to-date it
Max 24w QC3.0 Fast charging, and unliminted PD Fast charging (Remove thermal files by yourself if really need it)
KCAL Advanced color control
Undervoltage CPU, safety
Zram support with upstream lz4 compression algorithm, and max swappiness is 200 now
Optimized network scheduling
FS fsync toggle on/off
F2FS support with arter97's GC
Optimized CFQ io-sched
...... there is more
Donation:
MOD EDIT: TG link removed
Kernel source:
https://github.com/wloot/android_kernel_xiaomi_msm8998
Mi room 9.8.15 beta work?
thank you for your job.
Another kernel for chiron, will try soon
Thanks for your hard job
Works on eu?
Devager said:
Works on eu?
Click to expand...
Click to collapse
Yes
It works very well. Thank you
A known issue could not be added to some modules for the machine at kernel root to change the automatic settings of the ROM. The other is not working well.
ttl fix module is activated ?
Which version is stable? ?
Devager said:
Which version is stable?
Click to expand...
Click to collapse
i am use 390
Thanks !! It runs very good
Your kernel sounds awesome. Is the Wireguard Module present?
Wloot never answered any questions outside of her husband.
你的内核工作得很好,但是设置应用程序有问题。我已经重新启动了。不知道如何解决问题,当你不提供细节Your kernel is working well, but there's a problem with the settings app. I've rebooted. Don't know how to solve the problem when you don't give details?
4.4.194 works great, thank you @wloot
สุรินทร์ พลโธา said:
你的内核工作得很好,但是设置应用程序有问题。我已经重新启动了。不知道如何解决问题,当你不提供细节Your kernel is working well, but there's a problem with the settings app. I've rebooted. Don't know how to solve the problem when you don't give details?
Click to expand...
Click to collapse
run su -c "dmesg | grep device_verify" in terminal, and give me outputs
wloot said:
run su -c "dmesg | grep device_verify" in terminal, and give me outputs
Click to expand...
Click to collapse
4 ..4.194 Fix It Really a 553 solved by reboot 2-3 times thanks for reply
สุรินทร์ พลโธา said:
4 ..4.194 Fix It Really a 553 solved by reboot 2-3 times thanks for reply
Click to expand...
Click to collapse
i see that the recent reply are both by you just now:silly::silly:
4.4.194 [41] It works very well. Thank you for your permission to work in the background.