Develop Bugs

Moto g5s hard brick no fastboot only blinking notification light

Mine motog5s updated to stock fw and root uninstalled after it it hangs on boot screen. I flashed stock fw again with fastboot but after restart mobile didn't display anything not even vibrate just blinking notification when connect usb wire . how to unbrick only shows qualcomm hs dloader 9008 what to do, pls. reply.

You cannot log into fastboot mode?

qualcomm hs dloader 9008 = EDL mode, you should be able to restore with QFIL: https://forums.lenovo.com/t5/MOTO-E-1st-Gen/Moto-E-Not-Boot-Up/td-p/3231144 but it looks like motorola doesn't provide the files ... most likely you'll need a service center

Do not use QFIL. To unbrick, we need the blankflash file for G5S. And it is not on the Internet yet. Do not use the blankflash of any other models. Your best bet is to take the phone to a service center.
---------- Post added at 11:46 AM ---------- Previous post was at 11:46 AM ----------
Did you try holding the power down button and turning on the phone to enter bootloader?

Thanks for the reply the service center guys sayin as bootloader is unlocked out of warranty. They said mobile is rooted without checking the mobile as its not turning on, how they can say that its rooted . They just talking on phone with other persons but cant provide any solution what can be done.
Please provide any other solution.

ASHDCBZ said:
Thanks for the reply the service center guys sayin as bootloader is unlocked out of warranty. They said mobile is rooted without checking the mobile as its not turning on, how they can say that its rooted . They just talking on phone with other persons but cant provide any solution what can be done.
Please provide any other solution.
Click to expand...
Click to collapse
You downloaded the unlock key from Moto website by giving them your device serial number. That's how they know you unlocked bootloader. Service center won't help you. But fortunately, there is a way to revive your phone. But I'm not getting the blankflash file anywhere.
Tell me what exactly did you do to your phone.

Thank you,
Ok I just flahsed & tried stock roms, root & custom roms. Then I flashed stock rom of mine region firmware npp26.102.19 then motorola gave the updates to npp26.102.55-1 Dec. patch. Then next day new update came Feb patch npp26.102.55-4 just after it mobile started hanging & when restart it stuck on boot, not booting just stuck on boot animation. I tried TWRP recovery it said encrypted then I entered the unlock pin then it shows all the folders. Then I again fastboot npp26.102.19 to solve the issue but after flashing & restart it did not boot nor screen on no vibration tried several times but no response, when connect with pc or charger a white notification light blinking only & it detected as QHUSB_BULK something like that then I searched for it & install driver then shows as qualcomm dloader 9008.

Ok you should never flash an older bootloader over never one. It's a classic mistake that you made. I suppose we need the blankflash file to repair your phone. Let's wait to see what senior devs say.

ShattrdChain said:
Ok you should never flash an older bootloader over never one. It's a classic mistake that you made. I suppose we need the blankflash file to repair your phone. Let's wait to see what senior devs say.
Click to expand...
Click to collapse
Hmmmmmmmm
Please provide blankflash soon file I'll try.

there is no notification light on my g5s. what is blinking on yours?

Andrew Joseph said:
there is no notification light on my g5s. what is blinking on yours?
Click to expand...
Click to collapse
Next to front flash right side a white light is blinking. Try pressing power button then it will show.

nope. can't find it. the g5s plus has a 'secret' notification light. can't find anything about the g5s having the same.
what phone do you have?

Andrew Joseph said:
nope. can't find it. the g5s plus has a 'secret' notification light. can't find anything about the g5s having the same.
what phone do you have?
Click to expand...
Click to collapse
Its Moto G5s XT1795.
when you connect your device with PC what driver it shows fastboot, ADB or mtp or else QHUSB_BULK qualcomm dloader 9008.

does this only happen when you root your phone?

Can someone Help Us?
Hey, i have unlock the bootloader of my phone and flash the updated rom in my device. After that my phone is just off, i press the power button but it don't turn on, connect do pc or chargers but it not turn on, that is the hard brick, can i have a solution to this?
I have this:
"The Hardbrick tutorial you always craved for
Let's get some things straight
Forget flashing stock firmware anymore this makes permanent changes to your phone's firmware but this is the only thing that will resurrect the fallen lad
Requirements
Albus blankflash
Qualcomm drivers
Adb and fastboot
Bootloader from Albus
Steps
Get the Qualcomm drivers installed… make sure you disable Driver Signature Enforcement for your windows version
Run the script in albus blankflash to get into a dummy bootloader
Now flash bootloader and partition files and recovery from addison2potter.zip
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash recovery recovery.img
Now try flashing a stock firmware it will flash but you will not be able to boot right now
Now flash or boot TWRP recovery
fastboot flash recovery TWRP.img
fastboot boot TWRP.img
Now flash the debloated stock ROM or the TWRP Flashable stock build by Gtrcraft
(This is needed to get RIL back )
You should be able to boot into the stock ROM now
Now you can go back to TWRP and flash any ROM of your choice ".
But i don't know if it will work, because i don't know if this files can match my model: moto g5s xt1792
And sorry but i can't post links yet.
Please Help Us.

brunovsc said:
Hey, i have unlock the bootloader of my phone and flash the updated rom in my device. After that my phone is just off, i press the power button but it don't turn on, connect do pc or chargers but it not turn on, that is the hard brick, can i have a solution to this?
I have this:
"The Hardbrick tutorial you always craved for
Let's get some things straight
Forget flashing stock firmware anymore this makes permanent changes to your phone's firmware but this is the only thing that will resurrect the fallen lad
Requirements
Albus blankflash
Qualcomm drivers
Adb and fastboot
Bootloader from Albus
Steps
Get the Qualcomm drivers installed… make sure you disable Driver Signature Enforcement for your windows version
Run the script in albus blankflash to get into a dummy bootloader
Now flash bootloader and partition files and recovery from addison2potter.zip
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash recovery recovery.img
Now try flashing a stock firmware it will flash but you will not be able to boot right now
Now flash or boot TWRP recovery
fastboot flash recovery TWRP.img
fastboot boot TWRP.img
Now flash the debloated stock ROM or the TWRP Flashable stock build by Gtrcraft
(This is needed to get RIL back )
You should be able to boot into the stock ROM now
Now you can go back to TWRP and flash any ROM of your choice ".
But i don't know if it will work, because i don't know if this files can match my model: moto g5s xt1792
And sorry but i can't post links yet.
Please Help Us.
Click to expand...
Click to collapse
Yes tried this & other blank flash it show only this-----
Failed identify board. Wrong package?
ERROR: error loading package
FAILED: qb_flash_singleimage()->error loading package
other tried this also----------
Found this can anyone try
https://www.droidsavvy.com/unbrick-qualcomm-mobiles/
qfil also not flashing sahara error.

I have tried this but there's an error
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
em QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
em QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download

ASHDCBZ said:
Its Moto G5s XT1795.
when you connect your device with PC what driver it shows fastboot, ADB or mtp or else QHUSB_BULK qualcomm dloader 9008.
Click to expand...
Click to collapse
i haven't tried to root or connect via adb or anything else. my phone is just plain stock from factory.

brunovsc said:
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
em QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
em QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
Same error shows in Qfil.

Andrew Joseph said:
i haven't tried to root or connect via adb or anything else. my phone is just plain stock from factory.
Click to expand...
Click to collapse
So is it not switch on or displaying anything.

anyone help moto z2 force xt1789-3 without fastboot mode?

I updated the ota oreo on xt1789-3 but after completing the download and install it did not boot up, connected to the laptop getting the fastboot nash driver i flashed stock rom with adb the result failed to boot, i Trying to get into fastboot mode by keeping the volume + power off but nothing appears out of a black screen. My machine lost the fastboot mode.
Can someone help me to recover moto z2 force. Thanks. sorry for my english not being proficient

"Start Up Failed" after flash

Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of ​​what to do?
Tks!

riickseven said:
Hello friends
a friend brought me a Moto G7 Play (XT1952-2), and said he had forgotten the password, the email and all, to try to recover, he tried to flash, but did not unlock the bootloader, did not enable USB debugging and did not enable OEM unlock and yet downgraded on mobile.
The result is that the phone no longer leaves the Start Up Failed screen, it shows the following messages:
Fastboot AP Flash Mode (Secure)
SSM: Android checking failed.
No bootable A / B slot
Failed to boot Linux, failing back to fastboot
Fastboot Reason: Falling Through Normal Boot Mode
I already tried to unlock the bootloader, but as the OEM unlock option is not enabled, I could not. I tried to flash with the same rom as before or with a more current one and it didn't change anything either. I've tried basically everything I found in the forums. Can someone give me an idea of ​​what to do?
Tks!
Click to expand...
Click to collapse
Download Your Latest ota zip from
https://mirrors.lolinet.com/firmware/moto/channel/official/
then flash via rsd lite that will fix your phone and reset it

Help download
motorola/aljeter/aljeter:9/PPPS29.55-35-12-3/a0b9b:user/release-keys

Unbrick realme x

Hi it's me again
i've bicked my phone last week, it only shows the image of realme and then a text that says the boot/recovery image have been destroyed, the problem with this brick its THE BOOTLOADER ITS BLOCKED AND THE PHONE CANT START THE RECOVERY, so the options are pretty limited, plus my device is china version.
The things and tools that i've been trying are:
*ADB FASTBOOT (i know i already said that the bootloader it's blocked but i had to try)
*Qualcomm snapdragon flash tool QIFL
*Qualcomm premium tool
*XTM Inferno tool
*OPPO download tool
*MSMDownload tool
Yeah, i've tried a few things already (not too much to be honest), but with everyone theres a problem.
Adb dont recognice because its not in fastboot, QIFL needs a xml file but the roms don't have it, and i dont know how to program it, XTM inferno tool dont recognice the device, and oppo and msm download tool needs an account, if anyone knows what can i do now, please let me know, i'm a little bit sad cause i haven't made it to unbrick

So sad that you can't enter fastboot. It seems that means you can't send commands to your phone.
Recently, I saved my "soft brick" China version RMX. I also get "boot/recovery image have been destroyed" notification, but I can enter fastboot mode (power+Volume-), and my fastboot is unlocked. I used "fastboot flash recovery" cammand to flash TWRP and another command for vbmeta (https://forum.xda-developers.com/re...very-unofficial-twrp-realme-x-stable-t3959556). However, the response in "Windows Command Prompt" is "Failed unknown error".
So I decided to power off and charge my phone. After power off, there is thunder icon, a symbol for charging in powe off state, on the screen. Sunddenly, the phone boot into TWRP automaticly. I connected it to my laptop at once and find TWRP MTP service works which means I can copy the 2.6 GB stock Color OS zip (RMX1901CN_flashable_A17.zip, https://forum.xda-developers.com/realme-x/how-to/guide-to-stock-rom-stock-recovery-t3974607
, https://sourceforge.net/projects/rmx1901/files/custom_recovery_StockROM_flashable_files/) to internal storage (/sdcard), and I installed it successfully, though there was "Unmount to mount storage" error when I wiped Data in TWRP.
Reboot to system succesfully and showed Color OS setting guide, which showed at the first time you turn on the phone. Recovery changed to oppo stock Recovery, but the unlocked fastboot mode didn't change.
I am not sure wether the link is useful for cracked MSMDownload tool :https://www.techoxygen.com/msm-download-tool/

00002972 said:
So sad that you can't enter fastboot. It seems that means you can't send commands to your phone.
Recently, I saved my "soft brick" China version RMX. I also get "boot/recovery image have been destroyed" notification, but I can enter fastboot mode (power+Volume-), and my fastboot is unlocked. I used "fastboot flash recovery" cammand to flash TWRP and another command for vbmeta (https://forum.xda-developers.com/re...very-unofficial-twrp-realme-x-stable-t3959556). However, the response in "Windows Command Prompt" is "Failed unknown error".
So I decided to power off and charge my phone. After power off, there is thunder icon, a symbol for charging in powe off state, on the screen. Sunddenly, the phone boot into TWRP automaticly. I connected it to my laptop at once and find TWRP MTP service works which means I can copy the 2.6 GB stock Color OS zip (RMX1901CN_flashable_A17.zip, https://forum.xda-developers.com/realme-x/how-to/guide-to-stock-rom-stock-recovery-t3974607
, https://sourceforge.net/projects/rmx1901/files/custom_recovery_StockROM_flashable_files/) to internal storage (/sdcard), and I installed it successfully, though there was "Unmount to mount storage" error when I wiped Data in TWRP.
Reboot to system succesfully and showed Color OS setting guide, which showed at the first time you turn on the phone. Recovery changed to oppo stock Recovery, but the unlocked fastboot mode didn't change.
I am not sure wether the link is useful for cracked MSMDownload tool :https://www.techoxygen.com/msm-download-tool/
Click to expand...
Click to collapse
Thank you very much, i will keep looking, and will see the tool u shared, any step forward i make i will post it, and thanks again

Flash official ofp format stock ROM in EDL mode might be helpful. The links offer ofp ROM, guide & password for download tool. An XDA post also mentioned this link. But I'm still confused about the difference between RMX1901 and RMX1901EX model. Some custom ROM is universal for India and China variant on XDA .
https://boycracked.com/2019/05/06/official-realme-x-rmx1901-stock-rom/
https://forum.xda-developers.com/realme-x/how-to/color-os-stock-rom-redmi-x-rmx1901-t3952399/page2

00002972 said:
Flash official ofp format stock ROM in EDL mode might be helpful. The links offer ofp ROM, guide & password for download tool. An XDA post also mentioned this link. But I'm still confused about the difference between RMX1901 and RMX1901EX model. Some custom ROM is universal for India and China variant on XDA .
https://boycracked.com/2019/05/06/official-realme-x-rmx1901-stock-rom/
https://forum.xda-developers.com/realme-x/how-to/color-os-stock-rom-redmi-x-rmx1901-t3952399/page2
Click to expand...
Click to collapse
i can´t see the username and password, its what i need to open the msm download tool, i already have downloaded the files

hello bro.
i was having custom recovery and i tried to relock bootloader and now my device is bricked.
i am not able to go in fastboot mode.
please help

imteyajch said:
hello bro.
i was having custom recovery and i tried to relock bootloader and now my device is bricked.
i am not able to go in fastboot mode.
please help
Click to expand...
Click to collapse
Y
Hi dude, at this time I have not found a way to do it without realme tech support, or remote flash tool.
This device needs a “permission” of realme servers to get flashed. If your device is India version you can ask to boy cracker staff, if your device is China version maybe combine file staff can help.
If you have the option of send it to realme tech support, you should take it

Irvinukis said:
Y
Hi dude, at this time I have not found a way to do it without realme tech support, or remote flash tool.
This device needs a “permission” of realme servers to get flashed. If your device is India version you can ask to boy cracker staff, if your device is China version maybe combine file staff can help.
If you have the option of send it to realme tech support, you should take it
Click to expand...
Click to collapse
Its indian version. please help i did many things. i cannot go to booloader and fastboot mode

Bro yesterday I got an update from reami I updated to android 11 my bootloader was not unlocked and update was failed no recovery stuck on logo i Tryed to flash with msm but still no responce its indian version 1901 any solution please ?

But I can't tried ufs

Kernal Load failed

hi all.
for recent days i am using my mobile Moto Z2 play i want to upgrade to android 10 using custom rom but its failed with error everytime . i unlocked bootloader and rooted . Please help me
error:
Start up failed:
Your device didnt start up successfully. Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Error: failed to load kernel!
Fastboot Reason: Fall-through from recovery boot mode USB connected

Go to last firmware pie retail ALBUS_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml