Related
Hi all,
Seems there is a CM14.1 nightly now available for find7s on the official CM site, link here: hxxps://download.cyanogenmod.org/?type=nightly&device=find7s
Was just wondering if anyones given it a go yet, and if so knows whether or not it supports LVM and how stable the rom is?
Haven't found any info that states one way or the other, hoping someone knows.
Thanks in advance.
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Its a little bit weird that there is not available yet on the page https://www.cmxlog.com/14.1/
Hope it will appear here soon as well as it is already here:
(Find 7a) https://download.cyanogenmod.org/?device=find7
and
(Find 7) https://download.cyanogenmod.org/?device=find7s
Dirty flashed cm-14.1-20161205-NIGHTLY over cm-14.1-20161201-UNOFFICIAL via menu CyanogenMod updates. Everything seems to be OK. One remark: boot time when update is completed is quite long, so be patient. Of course in order to not see "SD corrupted" it is necessary to flash cm-13.0-find7-unified-storage-patch.zip
EDIT: Just for your information: boot animation CM face is gone. Now there is word "android" in plain white.
great news
Finally there we are changes logs:
https://www.cmxlog.com/14.1/find7/
https://www.cmxlog.com/14.1/find7s/
Android 7.1.1 in the next nightly
CyanogenMod will never support LVM.
This is 7.1 right? Or is it 7.0? I downloaded the 7.1 GAPPS, which should be correct for this build...
I updated it, and it runs smooth without any force crashes and nonsense. (Besides the time I tried to open an app not built for nougat, =P. If you're hesistant about updating, don't think, just do it.
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
Yup u can do that. After flashing cm14.1 official, u might wanted to flash cm13 patch by wuxianlin, then flash the gapps and lastly wipe the cache and dalvik
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
And yes you need to flash Wuxianlin's patch after every upgrade just for aesthetic purpose, that is to fix the SDcard damage info bug, unless CM find7 maintainer will fix that, and when it happen you will no longer need to flash the Wuxianlin's CM13 patch.
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
rafal.polska.b said:
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Click to expand...
Click to collapse
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
DELETE
Thanks everyone for the info, might hold off as I have LVM, here's hoping that namelessrom put out an official nougat rom in the not too distant future.
New Display is not supported
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
New Display is not supported. Colors, ghosting, and bleeding will still be running wild just like all older CM.
The only Custom ROM on the planet that fully supports new display is OmniROM and it seems that they could use some help. Please support their effort: omnirom.org
javier.pc said:
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
Click to expand...
Click to collapse
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Yashraj Chawla said:
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Click to expand...
Click to collapse
It is. But omnirom support substratum theme.
StormTrooper89 said:
It is. But omnirom support substratum theme.
Click to expand...
Click to collapse
I think you can install substratum theme in CM14.1 (but only substratum themes that support Android 7.1.1), since there no theme engine inside CM14.1
A custom Kernel for LineageOS 7.1.1 based on the ideas and experiences of SunKernel corona (StockKernel) for Xperia Z5 series
XDA:DevDB Information
SunKernel Pedigree Z5 for LineageOS, Kernel for the Sony Xperia Z5
Contributors
zacharias.maladroit
Kernel Special Features: FauxSound, KCAL, reworked thermal engine, fast camera, etc.
Version Information
Status: Beta
Current Beta Version: 1.3
Beta Release Date: 2017-03-14
Created 2017-03-14
Last Updated 2017-08-30
Reserved
Changelogs:
14.1_I
initial release - Features:
Click to expand...
Click to collapse
14.1_I.2
changes ...
Click to expand...
Click to collapse
14.1_I.3
add throttling for orientation sensor input events (most likely NOT needed) to cut idle cpu high load of 15-20%
Click to expand...
Click to collapse
14.1_I.4
removed lots of sources for log-spam (dmesg/kernel-log)
BCL<-->KTM interface for BCL (battery_current_limit) driver is now used, faster, more reliable (less overlapping) and better hotplug during thermal events, etc.
more reliable bcl mitigation due to fresh SoC value, allowing frequency-based mitigation even with BCL set to off
MUCH improved sound output
more reliable sound playback
Click to expand...
Click to collapse
Reserved
Kernel Releases (Betas for now):
Link to custom LineageOS 14.1 build (patchlevel March 5th 2017)
not sure what differs between this and the other builds:
https://drive.google.com/open?id=0BykGGWB96CBQR1VIb3QtdGpsTmM
I initiated the fetch of the repo files via
lunch lineage_sumire-userdebug
and added the blobs repo,
then restarted the build ...
From now on
both LineageOS and Resurrection Remix are unified builds that work on Single SIM and Dual SIM devices - no separate kernel or ROM needed !
Resurrection Remix: already IS the unified build (thread is currently parked at the General Subforum: Resurrection Remix 5.8.2 for Xperia Z5 (unified build) )
LineageOS: please download the unified LineageOS builds from olivier: lineageOS ROM (as mentioned at: LineageOS thread )
those are NOT boot-tested but should work (need testing + feedback)
Reserved (3)
Notes:
The preamp of FauxSound or the actual sound/soc driver state seems to be a bit "mushy",
thus the white noise (swoosh-ing, hiss-ing) is a bit high - reduce headphone amp by 10 or 15 (-10 or -15) so that you get a clear and well-defined output,
it really depends on your headphones - with in-ear it is most likely more noticable.
This was with unmodified "stock"/"upstream" lineageOS kernel source and with a bit patched up - so nothing I can and will change
Kernel source:
https://github.com/zachariasmaladro...kami_r2/commits/Sun-Kernel_Pedigree_cm-14.1_I
Thanks, I hope you don't forget dsds variant.
It is a pleasure to have SunKernel in LineageOS.
Thanks @zacharias.maladroit
I will try after released stable LineageOS for dsds and SunKernel.
Flashing lineage and kernel, looking forward to try it
Thanks for upload
s.hossein said:
Thanks, I hope you don't forget dsds variant.
Click to expand...
Click to collapse
you have an up-to-date boot.img for dsds device ?
if yes, please upload
Thx! But After flashing this Kernel i couldnt Boot up. Stuck ar Boot Animation. But the Animation did not stopped.
Same here, bootloop, can u look up to this?
We are so glad you put efforts in custom kernel for lineage, looking forward for an update
zacharias.maladroit said:
you have an up-to-date boot.img for dsds device ?
if yes, please upload
Click to expand...
Click to collapse
I think the tree sources are unified so is there a need for special kernel for dsds? I'll try this one on my E6683.
stipi69 said:
Same here, bootloop, can u look up to this?
We are so glad you put efforts in custom kernel for lineage, looking forward for an update
Click to expand...
Click to collapse
please update to the lineageOS builds from Olivier,
unless he has uncommitted changes locally in his repos - there are no changes,
my lineageOS build is at patchlevel March 5th 2017,
so with recent changes the kernel (more precisely the ramdisk) might be incompatible with the old builds from @Myself5
balrajs99 said:
I think the tree sources are unified so is there a need for special kernel for dsds? I'll try this one on my E6683.
Click to expand...
Click to collapse
it might work, but you most likely run into a bootloop, too, if you're not using latest lineageOS builds (those from Olivier)
In this minute i downloaded fresh update, flashed in this order:
1. lineage-14.1-20170316-UNOFFICIAL-sumire
2. open_gapps-arm64-7.1-nano-20161104
3. UPDATE-SuperSU-v2.78-20160905010000
4. Z5_SK_Enf_v14.1_I.3_sum
lineage from olivier from below link:
https://dl.olivierk.at/sumire/lineage-14.1/
lineage-14.1-20170316-UNOFFICIAL-sumire
i still get bootloop, scren is dimed, lineage animation keeps going for couple of secs, screen goes bright and bootloop from there on, waiting 10+ minutes now... maybe old superuser zipfile for this task? dont know realy, will make clean install
zacharias.maladroit said:
it might work, but you most likely run into a bootloop, too, if you're not using latest lineageOS builds (those from Olivier)
Click to expand...
Click to collapse
Yes, on latest build by oliver it ran into bootloop.
actually this goes into bootloop, flashed latest olivier's lineageos.
edit : is there any proper order of flashing ? and can you share lineageos build that you are on ?
@zacharias.maladroit: Thank you a lot for your work. We should be very thankful to every developer on the Z5!
Just gave your Kernel a try on latest olivier's lineageos (0316). Got a bootloop. After 20 minutes, I did a power reset and dirty reflashed latest olivier's lineageos (0316) via TWRP. Telephone was functional again.
L33Tgod said:
actually this goes into bootloop, flashed latest olivier's lineageos.
edit : is there any proper order of flashing ? and can you share lineageos build that you are on ?
Click to expand...
Click to collapse
yes, currently uploading
I'd install LineageOS + gapps (opengapps),
go through all steps,
then go into TWRP, make a backup and attempt to flash the kernel.
I haven't flashed the ROM via zip,
I flashed it via the .img files and fastboot since the updater-script seemed to cause trouble ...
Link to custom LineageOS 14.1 build (patchlevel March 5th 2017)
not sure what differs between this and the other builds:
https://drive.google.com/open?id=0BykGGWB96CBQR1VIb3QtdGpsTmM
I initiated the fetch of the repo files via
lunch lineage_sumire-userdebug
and added the blobs repo,
then restarted the build ...
Click to expand...
Click to collapse
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)
Thanks
zacharias.maladroit said:
yes, currently uploading
I'd install LineageOS + gapps (opengapps),
go through all steps,
then go into TWRP, make a backup and attempt to flash the kernel.
I haven't flashed the ROM via zip,
I flashed it via the .img files and fastboot since the updater-script seemed to cause trouble ...
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)
Thanks[/QUOTE]
I flashed the rom by flashing pixn kernel then booting into twrp when purple led comes on and it flashes rom normaly and to access twrp later i have to use your stock kernel and type fastboot boot boot.img and it can go into recovery, but can't flash lineageos because of that error 7.
Click to expand...
Click to collapse
L33Tgod said:
I flashed the rom by flashing pixn kernel then booting into twrp when purple led comes on and it flashes rom normaly and to access twrp later i have to use your stock kernel and type fastboot boot boot.img and it can go into recovery, but can't flash lineageos because of that error 7.
Click to expand...
Click to collapse
yeah, that's why I wrote:
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)[/QUOTE]
might be that upstream changed the content of updater-script,
that's why I ask for a working variant ;)
Click to expand...
Click to collapse
*Only tested on TA-1032 but it should work on other models too*
Downloads:
Build 1:
https://mega.nz/#!qIhFkKia!AkUMvQJ0PGVnSePabTvOgO-oUAMZahlCNaZfy2gE4vE
This TWRP now supports removing data encryption on Oreo.
General Changelog for TWRP version:
* minui fixes (cryptomilk)
* Better android-8.0 compatibility in ROM trees (Dees_Troy)
* Fix missing library in android-8.0 (nkk71)
* Fix inconsistent SDCard naming (DevUt)
* Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
Changelog:
Build 1:
- Initial release
What works:
- Touch
- OTG
- Backup (system.img backup doesn't work but don't worry, you can backup System and you'll be fine)
- Restore
- Flashing IMGs and ZIPs
What doesn't work:
- Battery percentage is incorrect (it's possible to fix but need some time)
- MTP (it's possible to fix but need some time)
- you tell me
For full backup you need to remove encryption so you can backup /data too.
If you're wondering why protect_f, protect_s, para and uboot partitions have 0MB it's because these partitions have less then 1MB.
Comment if link need to be updated.
Credits:
@mohancm for Lenovo K4 Note TWRP
Screenshots:
i can't install it with sp flashtools ... now i bricked my phone and i downgrated it to 7.1
Riadh300 said:
i can't install it with sp flashtools ... now i bricked my phone and i downgrated it to 7.1
Click to expand...
Click to collapse
i installed it without problems, tell me your device model and how you installed it.
Worst thing that could happen is that recovery got bricked, to recover simply flash new recovery. it worked for me, with twrp flash img, with flashify and with SP Flash Tool. Maybe you flashed it in wrong way.
Also please can someone flash/test this twrp so i can see does it work for others.
System and Data can be backed up and restored on oreo with this twrp?
Hey! Why Ported One? I did upload the Twrp Recovery Source! https://github.com/ChalapathiRevanth/twrp_device_nokia_heart
You are Free to Compile It
ChalapathiRevanth said:
Hey! Why Ported One? I did upload the Twrp Recovery Source! https://github.com/ChalapathiRevanth/twrp_device_nokia_heart
You are Free to Compile It
Click to expand...
Click to collapse
Top.
Thank you
Reygal21 said:
System and Data can be backed up and restored on oreo with this twrp?
Click to expand...
Click to collapse
data can be backed up only after removing encryption, system can be backed up without problems.
As for restore, it works on Nougat (i restored whole rom when i tried substratum theme)
but i didn't tested for Oreo.
I think that will work on Oreo too because there is no change in partition mount points between Nougat and Oreo.
Update:
I found out that incorrect battery percentage and MTP are not kernel issue so it is possible to fix it.
Is it still ported, or you used twrp kernel source in new version ?
What is the diff between this and mediafire007 ver ? This second one can't find the thread about it.
Thank you Skabo !
Nikola Jovanovic said:
Is it still ported, or you used twrp kernel source in new version ?
What is the diff between this and mediafire007 ver ? This second one can't find the thread about it.
Thank you Skabo !
Click to expand...
Click to collapse
it's ported from Lenovo K4 Note TWRP which have MT6753 CPU
Though i noticed that medifire007 is smother, especially when changing storage. This TWRP have latest TWRP version and touch works smoothly while on mediafire007 TWRP you need to wait in beginning to work.
Can this work on Nokia 1 with Android Oreo 8.1?
abdul_manan said:
Can this work on Nokia 1 with Android Oreo 8.1?
Click to expand...
Click to collapse
no, but i can try to port it, i just need testers.
Edit: Bro you already have twrp for Nokia 1, just search xda Nokia 1 forum.
SkaboXD said:
no, but i can try to port it, i just need testers.
Edit: Bro you already have twrp for Nokia 1, just search xda Nokia 1 forum.
Click to expand...
Click to collapse
Thanks Bro! It worked! But there is a new problem Now. Here it is..
https://forum.xda-developers.com/nokia-1/help/stock-recovery-error-nokia-1-black-t3798928
Tested and working on TA-1028 variant with Android nougat. Installed SuperSU and everything seems okay. Thx dev:victory:
Is there any custom Rom and kernel for Nokia 3 .
Stock Nokia 3 Rom and kernel is really bad
Can i use for Nokia 3 locked bootloader???
How to install ?
please Post Nokia 3 TA1032 Android 8.1 Custom recovery
Umairali321 said:
please Post Nokia 3 TA1032 Android 8.1 Custom recovery
Click to expand...
Click to collapse
Doesn't work on 8.1? Did you tried it?
I will be posting my kernel builds here for convenience.
Pre-requisite
Unlocked bootloader with TWRP Recovery installed.
DRM fix must be in place before rebooting to avoid a soft brick.
This DRM patch which was available in sToRm//'s free Xperifix version still works
Features
- Stock based kernel with DT2W enabled.
- Forced encryption disabled.
- Passes Safetynet out of the box.
- Fully working camera (Pie kernel-no DRM fix needed for camera).
- Flashable zip with no need to extract boot.img
- Compatible with any version of Magisk.
Installation
Flash drmpatch.zip then kernel.zip.
You can then flash Magisk if you require it.
Camera doesn't depend on it though.
Flash zip in recovery (don't just extract boot.img as zip has system files to enable DT2W)
Kernel Sources
https://developer.sony.com/develop/open-devices/downloads/open-source-archives
Note. Kernel is compiled as per stock. DT2W is enabled in the DTB, the same parameters as used by the Loire platform.
Downloads
G8141_DT2W-41-kernel.zip
G8142_DT2W-41-kernel.zip
Kernel Requests.
Post the kernel.sin and I will patch it and add it to the OP.
Kernel Requests: View attachment kernel-G8142-205.zip thx !
oneheart said:
Kernel Requests: View attachment 4522264 thx !
Click to expand...
Click to collapse
Added, thanks. Please test and report back (I only own G8141).
shoey63 said:
Added, thanks. Please test and report back (I only own G8141).
Click to expand...
Click to collapse
if i need flash the drmpatch.zip ？
oneheart said:
if i need flash the drmpatch.zip ？
Click to expand...
Click to collapse
Yes, it's required.
it work on G8412 ， thx ！
How can I update to 205 without losing my data?
SilverGamer_YT said:
How can I update to 205 without losing my data?
Click to expand...
Click to collapse
Flash only system.sin - nothing else. Then boot to recovery and flash drmpatch.zip, kernel.zip and then Magisk if you need it.
Reboot and you are done.
@shoey63
dual sim kernel have a problem with wifi.
wifi is off didn't turn on
karrouma said:
@shoey63
dual sim kernel have a problem with wifi.
wifi is off didn't turn on
Click to expand...
Click to collapse
Kernel itself is unmodified, and ramdisk changes don't touch wifi settings at all. Seems to be a hardware or software problem with Sony sd835 as per various complaints here https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Wifi-connection-problem/td-p/1315030
Adding to the confusion is that the issue is sporadic, intermittent and apparently device specific. Some users suffer badly, whereas others have no problems.
At any rate, there is nothing I can do about it.
shoey63 said:
Kernel itself is unmodified, and ramdisk changes don't touch wifi settings at all. Seems to be a hardware or software problem with Sony sd835 as per various complaints here https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Wifi-connection-problem/td-p/1315030
Adding to the confusion is that the issue is sporadic, intermittent and apparently device specific. Some users suffer badly, whereas others have no problems.
At any rate, there is nothing I can do about it.
Click to expand...
Click to collapse
Thank you for you work.
One guy tell me to flash CE1 firmware
I will trt
Hi, thank you for time to do this kernel @shoey63 nice work
Just a little beginner's question ... what is the best kernel for my rom stock (yours ot androplus kernel),
from what I read your kernel is not changed at all ?
Castiglionais said:
Hi, thank you for time to do this kernel @shoey63 nice work
Just a little beginner's question ... what is the best kernel for my rom stock (yours ot androplus kernel),
from what I read your kernel is not changed at all ?
Click to expand...
Click to collapse
For tweaking and double tap to wake - Androplus. For the stability of stock - mine.
shoey63 said:
I will be posting my kernel repacks here for convenience.
Pre-requisite
DRM fix must be in place before rebooting to avoid a soft brick.
This DRM patch which was available in sToRm//'s free Xperifix version still works.
Features
- Pure stock kernel with only ramdisk changes to enable DRM fix plus solve SafetNet and Magisk issues.
- Passes Safetynet out of the box.
- Fully working camera (No green Pic's).
- Flashable zip with no need to extract boot.img
- Compatible with any version of Magisk.
Installation
Flash drmpatch.zip then kernel.zip.
You can then flash Magisk if you require it.
Camera doesn't depend on it though.
Downloads
drmpatch.zip
G8141-205
G8142-205dual
Click to expand...
Click to collapse
sir what extra this forbidden xperifix does?
i mean if i have maple kernel and those 3 files from system.sin, and using @serajr 's modified script of TOBIAS , I create one boot.img file and flash it and flash the drmpatch.zip (given) here by you via twrp...
WILL it work?
i don't have xzp
if okay, plz reply
YasuHamed said:
sir what extra this forbidden xperifix does?
i mean if i have maple kernel and those 3 files from system.sin, and using @serajr 's modified script of TOBIAS , I create one boot.img file and flash it and flash the drmpatch.zip (given) here by you via twrp...
WILL it work?
i don't have xzp
if okay, plz reply
Click to expand...
Click to collapse
Not quite OK. You also need to patch init.environ.rc as per this post https://forum.xda-developers.com/showpost.php?p=74310718&postcount=43
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
jianlin3062 said:
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
Click to expand...
Click to collapse
You could try this one. It is from M-ROM v1.5, a Chinese rom.
I would flash the kernel.zip again, then the SuperSU.zip then the drmpatch.zip and wipe cache and dalvik and see how you go.
jianlin3062 said:
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
Click to expand...
Click to collapse
You must try this version this is created for xperia phones:https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012
help
I can not understand the order in which I have to do things
Should I unlock the bootloader and then?
I must install the recovery by adb or first the kernel
I come from samsung and the difficulty here is greater and there is much less information, if someone could help me I would appreciate it. I have the latest version of oreo the .205
Central project page
https://forum.xda-developers.com/xperia-xz2/development/recovery-twrp-3-3-1-0-t4074305
11.06.2020
Switch to TWRP 3.4.0
sodp twrp 2020-06 security patch level
stock twrp 2020-05 security patch level for firmware 52.1.A.2.1
Now both twrp should work without a ROM being installed (empty system/vendor/oem partitions) and still be able to decrypt your userdata.
Also the stock twrp touch should now always work instead of playing russian roulette.
Click to expand...
Click to collapse
13.06.2020
Thanks to the fixes in 3.4.0 we got now a TWRP with the following enhancements for STOCK and SODP:
- This TWRP will work with future 10.0 ROMs, you don't need a new build matching the security patch level of your ROM.
- You can install this TWRP again with the buildin ramdisk patcher. Please follow the installation instructions.
Click to expand...
Click to collapse
Please test and report back if you got any touch / decryption problems.
MartinX3 said:
13.06.2020
Please test and report back if you got any touch / decryption problems.
Click to expand...
Click to collapse
@MartinX3
XZ2 Compact here, tried the Version from 0611 and 0613 and with both I got stuck at SONY Logo.. Where can I pull a log for you in this case?
TacoLoco said:
@MartinX3
XZ2 Compact here, tried the Version from 0611 and 0613 and with both I got stuck at SONY Logo.. Where can I pull a log for you in this case?
Click to expand...
Click to collapse
STOCK or SODP based ROM?
STOCK or SODP based TWRP?
You booted into fastboot with software and not with the hardware buttons?
And I hope you didn't flash it with "fastboot flash boot twrp.img"
you could try to press PWR+VolUP for a short time, then shortly after it should crash
Then you should be able to get the /sys/fs/pstore folder files in your system (needs root)
Or if that doesn't work maybe a dump of your TA partition.
You use a 10.0 ROM with kernel 4.14 (SODP) or kernel 4.9 (STOCK)?
MartinX3 said:
STOCK or SODP based ROM?
STOCK or SODP based TWRP?
You booted into fastboot with software and not with the hardware buttons?
And I hope you didn't flash it with "fastboot flash boot twrp.img"
you could try to press PWR+VolUP for a short time, then shortly after it should crash
Then you should be able to get the /sys/fs/pstore folder files in your system (needs root)
Or if that doesn't work maybe a dump of your TA partition.
You use a 10.0 ROM with kernel 4.14 (SODP) or kernel 4.9 (STOCK)?
Click to expand...
Click to collapse
SODP Based ROM and TWRP, did enter bootloader with hardware keys.. I know this stands under known bugs but wouldnt it be more idiot proof to write this into the installation section as a separate step?
Thanks Martin for your ongoing dedication!
TacoLoco said:
SODP Based ROM and TWRP, did enter bootloader with hardware keys.. I know this stands under known bugs but wouldnt it be more idiot proof to write this into the installation section as a separate step?
Thanks Martin for your ongoing dedication!
Click to expand...
Click to collapse
Aaaand added!
Nice to hear and thank you for your report!
MartinX3 said:
Aaaand added!
Nice to hear and thank you for your report!
Click to expand...
Click to collapse
Nice
But now running into the next issue, when executing "Fix Recovery Bootloop":
cd /tmp/repackorig/ && /sbin/magiskboot hexpatch kernel 77616E745F696E697472616D667300
736B69705F696E697472616D667300 process endet with ERROR: 1
Error patching kernel.
Click to expand...
Click to collapse
It boots me to TWRP every time, I think this is related..
TacoLoco said:
Nice
But now running into the next issue, when executing "Fix Recovery Bootloop":
It boots me to TWRP every time, I think this is related..
Click to expand...
Click to collapse
What happens if you reboot the twrp and try it again?
Or if you flash magisk and try to boot?
Do you use a modified kernel?
Did you "fastboot flash boot twrp.img" by accident?
14.06.2020
Reuploaded the stock TWRP with a later touch kernel modules initialization.
Hopefully fixing the randomly happening not working touch.
Click to expand...
Click to collapse
Hi there,
what is 'sodp' please ?
moltes74 said:
Hi there,
what is 'sodp' please ?
Click to expand...
Click to collapse
It's described on the first page of the central project thread.
MartinX3, thanks for all your work!
I have a xz2c dual and, thanks to your guides, backed up the TA partition and flashed the latest Unofficial TWRP recovery with the up to date stock image.
My experience is that the problem with some boots not having the touchscreen working is still there. Fortunately, after rebooting you get a new chance ... and sometimes it actually works.
I used TWRP to install the latest Official LineageOS 17.1. It worked well. However, after that, TWRP was replaced by Lineage Recovery (?!) and I'm now unable to boot into recovery with the Unofficial SODP TWRP to flash it back.
Any guess of what could be the problem? Do you plan to provide a version which would work with the Official LineageOS 17.1 image?
tanty0 said:
I used TWRP to install the latest Official LineageOS 17.1. It worked well. However, after that, TWRP was replaced by Lineage Recovery (?!) and I'm now unable to boot into recovery with the Unofficial SODP TWRP to flash it back.
Any guess of what could be the problem? Do you plan to provide a version which would work with the Official LineageOS 17.1 image?
Click to expand...
Click to collapse
Answering myself back. Yes, this is known and you have already stated that you plan to look at this whenever you find the time: https://forum.xda-developers.com/showpost.php?p=83172223&postcount=345 , and below ...
I'd like to flash my userbuild los 17.1... which file/version do I need? (Android 10>TWRP) Stock or SODP ??
02.03.2021
Reuploaded the SODP TWRP with a workaround for Android 11 compatibility.
Click to expand...
Click to collapse
CHEIb00 said:
I'd like to flash my userbuild los 17.1... which file/version do I need? (Android 10>TWRP) Stock or SODP ??
Click to expand...
Click to collapse
It is currently not compatible with the official LOS 17.1 due to technical limitations by google.
@MartinX3 - using twrp3.4 on eXistenZ Q, (stock-based 10), and working great, but...
- max brightness is too low. Can hardly see the screen in daylight. Any options?
- are there any newer TWRPs for XZ2c stock?
Thanks
levone1 said:
@MartinX3 - using twrp3.4 on eXistenZ Q, (stock-based 10), and working great, but...
- max brightness is too low. Can hardly see the screen in daylight. Any options?
- are there any newer TWRPs for XZ2c stock?
Thanks
Click to expand...
Click to collapse
Is there no brightness setting?
Only behind the download link.
Since stock reached end of life there won't be any new twrp for it.
MartinX3 said:
Is there no brightness setting?
Only behind the download link.
Since stock reached end of life there won't be any new twrp for it.
Click to expand...
Click to collapse
Max brightness as set in settings is very dim...