Related
Update 180914:
Always believe something wonderful is just going to happen.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE:
IF YOU STUCK AT MI ACCOUNT LOGIN, make sure you flashed permissiver
If the device says your device has mi account locked, then pull simcard out and reboot to complete the setup.
If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
For Chinese users you can contact me via Coolapk.See my signature.
v1:
Initial release
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
This for Aonly or A/B?
how about huawei device？
山海蓝精灵 said:
how about huawei device？
Click to expand...
Click to collapse
Idk, maybe need 8.1 vendor huawei device
fxsheep said:
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
v1:
Initial release
arm builds WIP
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
Click to expand...
Click to collapse
is volte working?
fxsheep said:
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
v1:
Initial release
arm builds WIP
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
Click to expand...
Click to collapse
AB support please!!!
wmfanboy25 said:
AB support please!!!
Click to expand...
Click to collapse
I don't have A/B devices ,so I don't get familiar with how A/B devices work,also this MIUI port is from an Aonly device, converting Aonly to A/B image is more difficult than vice versa
Global or Chinese?
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
[email protected] said:
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
Click to expand...
Click to collapse
take log or try clean flashing
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
Does this sgsi has arb feature?
Stuck at mi account log in. Couldn check device status
fxsheep said:
...
Click to expand...
Click to collapse
I want try at MiPad 4. It is arm64, aonly.
What do u think?
Can this be flashed on redmi note 3 pro (kenzo)?
other dead Rom
fountoutch Dead
Oos Dead
miui 10 Dead
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
ebautista said:
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
Click to expand...
Click to collapse
yogasetyaadi said:
Stuck at mi account log in. Couldn check device status
Click to expand...
Click to collapse
Reboot and retry, so many people booted
dcduartee said:
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
Click to expand...
Click to collapse
Mount vendor in twrp
dcduartee said:
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
Click to expand...
Click to collapse
Vendor mounted?
Oki guys i want to share whit A50 community,working
SyberiaOs Gsi android 10
Flash tutorial
https://master.dl.sourceforge.net/project/zjrdroid-gsis//GSIs/SyberiaOS-AB-10-20191013-GSI.img.gz
https://mega.nz/#!ZhgXWSxT
Key:
X4IG1jc0v33Pe77280ZR2VRUZ4Xt6aIvP9stXAouWng
Pixel experience 10 android Q
ZJRDroid
Wipe cache,dalvik cache,data,system
Flash Gsi reboot
https://mirrors.lolinet.com/firmware/gsi/Generic/Generic-AB-10-20191007-ErfanGSI.img.7z
Erfan Geneic build Gsi android 10 Q
Wipe data,cache,dalvik cache,system
Flash Gsi reboot
GSI roms.And flashing guide.
First you need TWRP no need to be rooted.
Before starting whit flashing GSI make backup
Android 10 Q Phh built (Flashed whit geiti94 TWRP and multidisabler)
https://github.com/phhusson/treble_.../download/v200.c/system-quack-arm64-ab.img.xz
https://sourceforge.net/projects/op...64-10.0-nano-20190920-UNOFFICIAL.zip/download
Flashing guide
Resize system,reboot recovery and flash gapps
Android 9 Havoc (Flashed whit geiti94 TWRP and multidisabler)
http://bit.ly/2mhhmxf
https://opengapps.org/
Flash guide
Android 9 Pixel Experience (flashed whit Zvox TWRP no multidisabler)
https://github.com/EnesSastim/Downl...19-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Gapps inside rom
Flash guide:
PE Working only whit Zvox TWRP
Andoid 9 Arrow Os (flashed whit geiti94 TWRP and multidisabler)
https://mega.nz/#!BopFTQIT
Gapps inside rom
Flash guide:
Flash gsi
Go to mount system, advanced, file menager,system,system,bin,delet system-rw.sh
Reboot
Video will upload
Android 9 Blissrom (flashed whit Zvox TWRP no multidisabler)
https://mega.nz/#!F4hABI6T
Flash gsi
Reboot
Video will upload
Special thx
geiti94 for TWRP
Zvox for TWRP
Ianmacd for multidisabler
Good news guys, soon we will be able to flash various Gsi builds:
Miui
OOS
Flame Os
etc
Thx to phhusson and erfanoabdi.New builds from erfanoabdi will support our device (exynos).
I will share whit you for all flushable Gsi build.
Special thx for geiti84 for his TWRP
Zvox for TWRP
Ianmacd for Multidisabler
Are ya gonna make a bugs list for each? Would just be nice to know what is and isn't working. Thanks
RandomAJL said:
Are ya gonna make a bugs list for each? Would just be nice to know what is and isn't working. Thanks
Click to expand...
Click to collapse
Nope i don't have that much time.General problem is FP don't work in all GSI
Video for flashing android 10 updated no need for flashing magisk
Which is the best rom as of now
mmahith18 said:
Which is the best rom as of now
Click to expand...
Click to collapse
Android 10
muhamet said:
Android 10
Click to expand...
Click to collapse
So for me, I had a lot of lag after using video apps such as Netflix or YouTube. Do you know if this issue still persist on the android 10 ROM? I don't care about the fp (it's crap), but face unlock would be nice
Agil1ty said:
So for me, I had a lot of lag after using video apps such as Netflix or YouTube. Do you know if this issue still persist on the android 10 ROM? I don't care about the fp (it's crap), but face unlock would be nice
Click to expand...
Click to collapse
I used 2,3 days daily drive.And i didn't have such problem.
muhamet said:
Android 10
Click to expand...
Click to collapse
is face unlock working??
MateoQ said:
is face unlock working??
Click to expand...
Click to collapse
Didn't try
what about GCAM?
Mega links need decryption key
The links below need a key to download. Does anyone know what the keys are?
muhamet said:
Oki guys i want to share whit A50 community,working GSI roms.And flashing guide.
First you need TWRP no need to be rooted.
Before starting whit flashing GSI make backup
Android 10 Q Phh built (Flashed whit geiti94 TWRP and multidisabler)
https://github.com/phhusson/treble_.../download/v200.c/system-quack-arm64-ab.img.xz
https://sourceforge.net/projects/op...64-10.0-nano-20190920-UNOFFICIAL.zip/download
Flashing guide
Resize system,reboot recovery and flash gapps
Android 9 Havoc (Flashed whit geiti94 TWRP and multidisabler)
http://bit.ly/2mhhmxf
https://opengapps.org/
Flash guide
Android 9 Pixel Experience (flashed whit Zvox TWRP no multidisabler)
https://github.com/EnesSastim/Downl...19-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Gapps inside rom
Flash guide:
PE Working only whit Zvox TWRP
Andoid 9 Arrow Os (flashed whit geiti94 TWRP and multidisabler)
https://mega.nz/#!BopFTQIT
Gapps inside rom
Flash guide:
Flash gsi
Go to mount system, advanced, file menager,system,system,bin,delet system-rw.sh
Reboot
Video will upload
Android 9 Blissrom (flashed whit Zvox TWRP no multidisabler)
https://mega.nz/#!F4hABI6T
Flash gsi
Reboot
Video will upload
Special thx
geiti94 for TWRP
Zvox for TWRP
Ianmacd for multidisabler
Click to expand...
Click to collapse
demunted said:
The links below need a key to download. Does anyone know what the keys are?
Click to expand...
Click to collapse
I checked the link,only blissrom was with key.I fixed,other links are direct links.If you whant some rom t dawnload and you can't for any reason just pm i will help you my frend
You are most awesome, thank you. Do you know at all if these will work on the A505W? I will try anyways, I am not happy with the Havoc GSI thus far. Magisk won't stick (applies in TWRP successfully but app after boot shows not installed for kernel module). Also, fingerprint not working (though thats the case with all custom ROMs right now) and MTP File sharing is broken.
muhamet said:
I checked the link,only blissrom was with key.I fixed,other links are direct links.If you whant some rom t dawnload and you can't for any reason just pm i will help you my frend
Click to expand...
Click to collapse
demunted said:
You are most awesome, thank you. Do you know at all if these will work on the A505W? I will try anyways, I am not happy with the Havoc GSI thus far. Magisk won't stick (applies in TWRP successfully but app after boot shows not installed for kernel module). Also, fingerprint not working (though thats the case with all custom ROMs right now) and MTP File sharing is broken.
Click to expand...
Click to collapse
For twrp patched whit magisk i don't know,because i didn't flashed.I just waiting to be more stable.For MTP i know that we have wonderful devs like geiti84 and zvox.geiti84 its aware for problem whit MTP and is working t fix that problem.For FP sensor i asked Phhuson and maybe next Android 10 realise this will be fixed.And yes all custom Gsi have FP sensor problem
Can you post the screenshot???
Add new 2 working Gsi Android 10 links
Does Pixel Experience Android 10 works as daily driver?
Dhrubo2000 said:
Does Pixel Experience Android 10 works as daily driver?
Click to expand...
Click to collapse
I've tried it and it works for the most part. Camera, LED Flash, Bluetooth, Rotation, WiFi, Calls, Data, Audio. MTP for some reason does not seem to work. Gestures work but there is no nav bar on bootup. There is network but the signal bar shows empty. Fingerprint sensor does not work. There is a bit of lag when opening apps for the first time but they do ok afterwards. Gonna do some more testing and gather logs and see what I can fix on my own.
Project Treble for F8131/2 [Android 10]ReadMe
Hello, everyone, I'm Sjll. Tone family(Xperia msm8996 devices) will stay at kernel 4.9 for Android 10. Our treble support for Android 10 has been released. There are some differences between Treble Pie, you need to know that:
1. GSI should be A/B ARM64. NOT A only as Pie.
2. TWRP should use a new version for Android 10.
3. Never flash software binaries from SODP, it has been included in vendor.img
I am not responsible for bricked devices, dead SD cards
Required Files
Treble Files::
AndroidFileHost: Download Link
TWRP for Android 10.0::
Download Link
How to flash:
1. Download Treble Files and extract it.
2.
Code:
fastboot flash boot boot.img
fastboot flash oem vendor.img
fastboot flash system <Path of GSI.img>
3.Flash Twrp and other MODs.
4.Boot and enjoy
For F8132:
Flash a dual patch in twrp: You can download it from here.
For Devs:
See @local__hero's post: Link
Update and bugs:
V2.10:
Update to android-10.0.0-R31.
V1.96:
Update: Minimum brightness fixed.
V1.90:
Update: Rotation is fixed.
V1.86:
Update: Hotspot is fixed.
Bugs: Rotation is wrong.
V1.0:
Bugs: Hotspot is broken.
XDA:DevDB Information
Treble, ROM for the Sony Xperia X Performance
Source Codes
Link
Contributors
Sjll
ROM OS Version: 10.0
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Beta
Created 2020-01-25
Last Updated 2020-03-18
Reserved
Reserved
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
edy sunanto said:
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
Click to expand...
Click to collapse
Hello, I think you'd better ask the GSI devs for help.
ok ... thanks a lot ... very good project ... bluetooth can't be connected in my device
Finally new treble project.. Thanks sjll.. Very appreciate it!
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Fhcker90 said:
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Click to expand...
Click to collapse
yes this treble project works well on havoc 3.1 expressluke .. i've tried it .. cooler and feels lighter ..
Thank's to sjll
Z3r0.v said:
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Click to expand...
Click to collapse
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
I trying lineage from you, trying havoc 3.1 expressluke and nothing
On lineage bootanimation dont start, on havoc problem with bootloop, idk how i cat solved this problem..
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
f8132. The patch for dual sim does not work. in single SIM card mode - it doesn’t work with all operators, I live in Kazakhstan - the beeline and the asset work without problems, Altel and Body 2 do not work. Wi-Fi also turns off after 10 minutes of use. is there any way to solve the communication problem? I liked everything, but for work I need two sims - Beeline and Altel. And it’s not convenient to carry two phones with you.
DAC doesn't work
what is the difference between v1 and v2?
OTG does not work
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
atlantix1 said:
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
Click to expand...
Click to collapse
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Some random said:
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Click to expand...
Click to collapse
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
atlantix1 said:
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
Click to expand...
Click to collapse
Hmmmmmmmm.
Sad
Sadly, thats all that comes to mind... What Rom Were you trying to install? (GSI)
If you look at the header and think is is already there ... sorry. But I think we should have a good chance to build it. It is a well supported SoC Snapdragon 622.
Some things that are required are available:
- bootload unlocking
- custom recovery (TWRP / OF)
- kernel sources (https://forum.xda-developers.com/t/xiaomi-has-released-poco-m3-kernel.4205133/)
With that it should be possible to cook something:
[GUIDE] How to build an unsupported rom using sources from other roms
Hello all and welcome to my first how-to guide I began the process of learning about ROM about 4 months ago (so excuse this post if there are any inaccuracies and please feel free to correct me in the comments - I will absolutely update this...
forum.xda-developers.com
How to Build Lineageos rom for any android device Easily ! {Full guide}
Introduction These instructions will hopefully assist you to start with a stock android device, unlock the bootloader (if necessary)...
www.lineageosrom.com
https://medium.com/@daltonfury42/building-lineageos-for-your-device-a7d26ab50549
How to build LineageOS for a device without official support?
I have a Mi 8 Lite (platina), for which there is no official LineageOS support. But LineageOS custom ROM for the device is available on XDA. On further research, I can see that vendor files, device...
android.stackexchange.com
Anyone wants to try?
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Sure, that could be first step. Let us see how well treble is implemented.
ping840907 said:
I'm planning to flash the GSI image of Lineage OS
Waiting for unlock process now...
I thought that most function on this phone is quite usual on any other phones,
so it should be no big issue on flashing GSI?
Tell me if I was wrong..
Click to expand...
Click to collapse
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Gsdark said:
already tried to install on mine, and does not start the system after it is installed, twrp shows as if it had no operating system installed!
Click to expand...
Click to collapse
How did you flash the system.img? I believe you need to restart on fastboot, use the command "fastboot reboot fastboot" and only then "fastboot flash system system.img"
Anyone who has unlocked the bootloader but does not want to format the current Android installation to test a GSI, can test it using DSU first
waiting for this rom
Waiting for custom rom
a CRDroid ROM for POCO M3 please.
The hardware specs are 95% the same as REDMI 9T
No forum for redmi 9T, so i think poco m3 has a little bit chance to get supported soon
lineageos ? ?
yes please
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
0
ppGabe said:
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
This GSI of LineageOS works (arm64_ab variant), also with included Magisk.
https://telegra.ph/GSI-Installation-for-Poco-M3-02-19 Installation guide.
https://drive.google.com/file/d/1cfX-trm11ek12IvqUgKiHXh8bzrTEdzM/view?usp=drivesdk EU vendor.img
https://drive.google.com/open?id=1jl3YLCaAe3SM0npV9xe15k4aoFQ9PVe3 GSI installer
Permissiver v5 you can find online
Also GApps
Bluetooth works with some workarounds. Join POCO M3 official group on telegram for more support http://t.me.com/pocom3globalofficial
Update: Headphone jack works by turning on "Use alternative audio policy" in phh settings > Qualcomm features. Go crazy.
Click to expand...
Click to collapse
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Rama Himura said:
OK Google and Google Voice Typing do not work. Could you inform the developer about it? Perhaps somebody can find workaround.
Click to expand...
Click to collapse
I'm not really the person to ask about this. I've just pulled those from the telegram group. You can join the telegram group, there's definitely more knowledgeable people there.
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
twrp_citrus-POCOM3_3.5-1.A10-08-03-2021-D-BL.imghttps://androidfilehost.com/?fid=2188818919693749308
juve60tet said:
LineageOS 17.1 - UNOFFICIAL | Android 10.
Released : 16/03/'21
Download https://drive.google.com/file/d/1TelSo8YXBN6BxSaJVOW791q6B9RQLVG8/view
Changelog:
• Initial build
• RIL Fixed
• Fixed random reboots
• Added fixed partition sizes for
/system , /product
Note:
• Clean flash
• Gapps not included
• Flash any gapps you want
By Jhem
Join - @PocoM3OfficialPH
Follow - @PocoM3UpdatesPH
#Lineage #Unofficial #ROM #Q #Citrus
Click to expand...
Click to collapse
Should be noted that there is still a bluetooth bug in this version, but I'm sure it'll get fixed, devs know what they're doing Test and provide feedback people!
I tried this on my EU Poco M3 with 4GB RAM and 8GB flash and it failed to boot. I think it failed immediately after the bootloader so probably the kernel had some boot error while booting.
Installed LOS and it booted up and works great except for Bluetooth. Can't wait for further updates, been holding off using my M3 until now.
Works like charm for a initial build, very thx
Here my way to got it running:
1. Unlock Bootloader
2. Tried TWRP Fork but messed with the reboot ^^ (i was just to dump)
3. Tried OrangeFox Fork from here
4. Important! After recoveryflash via fastboot, hold down power and vol+ button until Orange Fox appears on screen (normal restart causes recovery image to get wiped out. I told you i was to dump in the first place so i didn't try TWRP again but i guess would also work)
5. Stock Rom seemed after Install dead to me, because of stuck at MIUI Logo (but maybe i did not wait long enough and i updated to 12.0.7. befor and did a factory reset)
6. OrangeFox showed that Partitions are encrypted.
7. Got Xiaomi EU Rom here (I used 12.0.4 because 12.0.6. were taken off again yesterday while i downloaded it.. lol)
8. In OrangeFox now i wiped all cache, dalvik and data (Need because of encryption) but do no restart after it (i did restart one time to see what happens to the encryption, but i had in mind i got a problem after it, so you should try without restart first)
9. Flash Xiaomi EU Rom with OrangeFox (tried to boot after flash into this rom but stuck on MIUI Logo, but maybe did not waited long enough again^^)
10. Flash LineageOS 17.1 from juve60tet and wipe caches again and reboot.
11. Working Lineage OS on Poco M3
Bugs i noted:
Bluetooth as already known
Fingerprint sensor selects Wigeds/Icons on Homescreen like when navigating with a keyboard or a controller in Android.
Introduction
This is a LineageOS Recovery compiled from the source tree of LineageOS 17.1 for Realme X50 Pro 5G. This is part of my ongoing work to port LineageOS 17.1 to this device. Work on the actual LineageOS 17.1 ROM is still under way (but it should be available very soon), while the recovery has been usable for quite some time now. Since it is not possible for TWRP to support any device launched with Android 10 for now, I figured that this might be useful even before I release the LineageOS custom ROM (e.g. people may want to flash Magisk on official ROMs).
Instructions (Installing Recovery)
1. Run `fastboot flash recovery recovery.img`
2. Run `fastboot reboot recovery` to enter LineageOS Recovery
Instructions (Installing Magisk)
You have to use the official Magisk, version 20.4 or later. Installing an older Magisk will make the system unbootable.
1. Download Magisk >= 20.4, put onto computer
2. Reboot to LineageOS recovery, select `Mount /system` (you may see some errors, but they can be safely ignored)
3. Select `Apply update from ADB`
4. Run `adb sideload Magisk-xxx.zip`
5. You will see a signature verification error, select `Yes` to bypass the check
6. Reboot to system to enjoy your Magisk installation.
DOWNLOADS
DOWNLOAD lineageos recovery for X50 Pro 5G
Need few testers to test roms, recoveries etc.
Will it work for realme ui 2.0(Android 11)?? ,I want to flash magisk on realme ui 2.0
ac386 said:
Will it work for realme ui 2.0(Android 11)?? ,I want to flash magisk on realme ui 2.0
Click to expand...
Click to collapse
Read it properly. Its clearly mentioned that its for only RMX2076 and Android-10 only.
Mohzuned said:
Read it properly. Its clearly mentioned that its for only RMX2076 and Android-10 only.
Click to expand...
Click to collapse
Yes but can u tell me is there any way to flash magisk in realme ui 2.0(Android 11) ? There is no firmware file available for my device (RMX2086) ,So I can't even use boot img patch method to flash magisk , I don't want to downgrade to android 10 to flash magisk
ac386 said:
Yes but can u tell me is there any way to flash magisk in realme ui 2.0(Android 11) ? There is no firmware file available for my device (RMX2086) ,So I can't even use boot img patch method to flash magisk , I don't want to downgrade to android 10 to flash magisk
Click to expand...
Click to collapse
First tell me your current firmware version. And there is no benefit to flash magisk in android-11 because it will damage your wifi, mobile connection, bluetooth etc. So I won't recommend you to flash magisk on android-11. If you still want to flash it better to downgrade to Android-10 there is everything fine with magisk.
Finally someone tried to make custom rom for this phone good job
Un
afgboy said:
Finally someone tried to make custom rom for this phone good job
Click to expand...
Click to collapse
UnLuckily i don't own this device. But i have build for testing. Last one booted. Few bugs were present, so latest build need to be tested.
hi bro, do you successfully port lineageos to cn rom?
maczekiel27 said:
hi bro, do you successfully port lineageos to cn rom?
Click to expand...
Click to collapse
Its not port but yes it will work for rmx2071cn also android -10 only
Mohzuned said:
Its not port but yes it will work for rmx2071cn also android -10 only
Click to expand...
Click to collapse
i'm planning to port LineageOs to rmx2072, i have all the files needed,
maczekiel27 said:
i'm planning to port LineageOs to rmx2072, i have all the files needed,
Click to expand...
Click to collapse
I built lineageos Android-10 already. Need to be tested.
Mohzuned said:
I built lineageos Android-10 already. Need to be tested.
Click to expand...
Click to collapse
i have files for android 11, i share it with you, so we can cook TWRP for android 11
maczekiel27 said:
i have files for android 11, i share it with you, so we can cook TWRP for android 11
Click to expand...
Click to collapse
I don't own the device but i have source codes for roms and recovery. Pm me on telegram.
Telegram: Contact @Xtyscissor
www.telegram.me
Mohzuned said:
I built lineageos Android-10 already. Need to be tested.
Click to expand...
Click to collapse
give me the link let me test, my unit is rmx2072 not 2071
Mohzuned said:
I don't own the device but i have source codes for roms and recovery. Pm me on telegram.
Telegram: Contact @Xtyscissor
www.telegram.me
Click to expand...
Click to collapse
i dont have telegram, facebook only or line?
maczekiel27 said:
give me the link let me test, my unit is rmx2072 not 2071
Click to expand...
Click to collapse
It should work for all varient. Pm on telegram
Mohzuned said:
It should work for all varient. Pm on telegram
Click to expand...
Click to collapse
i pm you on telegram
This looks interesting I'm following this thread!
I need something for RMX2071
Jacob_Bentzen said:
I need something for RMX2071
Click to expand...
Click to collapse
???