Related
I need an opinion on this one. I've looked for this problem but it seems not to be clear what is causing it. I have Wildfire S (EU) Marvel. The device is S-On but I unlocked the boot loader and installed CWM. I've already tried several ROMs but it doesn't help to solve the issue. The problem appears during making the call - the screen goes black when you put the phone next to head and after that doesn't want to wake up. The only thing that wakes it up is putting it next to strong light source so I think the light sensor is the one to blame. However automatic backlight seems to be working fine. I really hope that it is not hardware problem. Please give any suggestion to try solving this problem. I would even go for the option to shut down somehow the light sensor because restarting phone after each call is kind of annoying. Thank you in advance for any help you can provide. Sorry for such a long introduction.
anubius said:
I need an opinion on this one. I've looked for this problem but it seems not to be clear what is causing it. I have Wildfire S (EU) Marvel. The device is S-On but I unlocked the boot loader and installed CWM. I've already tried several ROMs but it doesn't help to solve the issue. The problem appears during making the call - the screen goes black when you put the phone next to head and after that doesn't want to wake up. The only thing that wakes it up is putting it next to strong light source so I think the light sensor is the one to blame. However automatic backlight seems to be working fine. I really hope that it is not hardware problem. Please give any suggestion to try solving this problem. I would even go for the option to shut down somehow the light sensor because restarting phone after each call is kind of annoying. Thank you in advance for any help you can provide. Sorry for such a long introduction.
Click to expand...
Click to collapse
long introduction is far better than a short one ...
did you install rom propperly (factory reset/cache clean/dalvik clean)?
did you try using any other dialer app just to check ?
Like this, or this
I think i have read about such problem somewhere, if i find it i will post you the link to it...
also here are some apps to check your proximity sensor :
ProxyLightTester i couldn't find it on market. (not tested)
Proximity Sensor Finder Market link. (tested) and it will report 'all or nothing'
b02 said:
long introduction is far better than a short one ...
did you install rom propperly (factory reset/cache clean/dalvik clean)?
did you try using any other dialer app just to check ?
Like this, or this
I think i have read about such problem somewhere, if i find it i will post you the link to it...
also here are some apps to check your proximity sensor :
ProxyLightTester i couldn't find it on market. (not tested)
Proximity Sensor Finder Market link. (tested) and it will report 'all or nothing'
Click to expand...
Click to collapse
Hi, Thanks a lot for suggestions. So it seems to me that proximity and light sensors work. I tried several software including the one you suggested and the proximity and light sensor respond ok. I also tried different dialer but it doesn't help. I have no idea what can it be. I am thinking to put the device back to the factory state and maybe install official ROM but I am not sure if this will solve the problem. Thank you again for helping. And your device never had this problem?
Never had that problem.. Try reflashing w/o any app2sd gapps and stuff, just clean new rom and try it..
Sent from my HTC Wildfire using xda premium
anubius said:
I am thinking to put the device back to the factory state and maybe install official ROM but I am not sure if this will solve the problem.
Click to expand...
Click to collapse
Before you do that try this build.prop file and see if it helps...Just remove the ".txt" and set your permissions same as the old build.prop file you renamed.
Tera Tike said:
Before you do that try this build.prop file and see if it helps...Just remove the ".txt" and set your permissions same as the old build.prop file you renamed.
Click to expand...
Click to collapse
Thank you guys for all the suggestions I followed your advices but the phone simply refuses to wake up after the call. I am trying to go back to factory default since this is my last hope. Really confused what is causing it.
Hi All,
I'm am absolutely stumped and have tried what feels like everything I can to resolve my issue to no avail. So, I'm hoping to find success from the wisdom of the seasoned XDA community.
I have an SGH-T999 with baseband UVDMD5. In early September, my camera stopped working. When I open the camera app, I'm greeted with the infamous "Can't connect to camera" message. The front camera works fine (via Skype), but the rear camera does not. I've tried all of the following but the camera still won't work:
1) Unrooted and re-flashed the stock root66;
2) Finding the correct "SLIM_ISP.bin" file, placing them in the /data folder, and set the permissions to 777;
3) Re-flashed the stock UVDMD5 bootloader, firmware, and modem;
4) Took the phone to a shop to have a new camera installed and they couldn't get the new hardware to work either (so, it's definitely software related);
5) Cleared the app cache and fixing permissions in recovery;
6) Restored a Nandroid from a previous state of the device when the camera was fully operational;
I don't know what else to do. PLEASE help me folks. I really want my camera back. Thank you in advance for your time and insight.
I've attached a Catlog I recorded while attempting to open the camera, if that helps at all.
just a thought , but if you have a nandroid backup could you uninstall current camera and then grab camera from nandroid and install it ?
or if have titanium backup hit the install button on camera apk (even though its already there). these methods have worked for me with browser issues.
just an idea.
good luck.
err on the side of kindness
Have you considered replacing the camera hw? It's very easy to do and the part usually costs less than $10.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Have you considered replacing the camera hw? It's very easy to do and the part usually costs less than $10.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Hi Doc, I tried that. Sorry. Should have listed it. I took it to a shop to have a new camera installed and they couldn't get the new hardware to work either. So, it's definitely software related.
Thanks for the suggestion though. Please let me know if you have any other ideas.
mrrocketdog said:
just a thought , but if you have a nandroid backup could you uninstall current camera and then grab camera from nandroid and install it ?
or if have titanium backup hit the install button on camera apk (even though its already there). these methods have worked for me with browser issues.
just an idea.
good luck.
err on the side of kindness
Click to expand...
Click to collapse
mrrocketdog,
Would that work if the camera doesn't work even when the Nandroid is restored (despite that fact that the camera was functional when the Nandroid was created)? Thank you.
At this point I think that would be worth a shot. If it doesn't work though I'd have to say it sounds like it could be hardware related, even though you replaced the module. Might be a problem on the motherboard or something like that.
The only other thing I can think to try though is to flash a 4.1.1 rom. Then using the hidden code to write the camera firmware to the device. If the firmware got corrupted somehow, this could fix it. The problem though, is if you've updated to 4.3 firmware, it probably won't work. They patched against our ability to write the cameras firmware ourselves. If this was done in the controlling app, it may just work. However, if it was patched in the base firmware, there won't be any way I know of to do this.
I'll post the code in a min. Gotta hunt it down again...
Sent from my SAMSUNG-SGH-I747 using Tapatalk
---------- Post added at 12:16 AM ---------- Previous post was at 12:07 AM ----------
Ok here are the codes:
*#34971539#
*#7412365#
Enter in the stock dialer.
I'm pretty sure the first one is the one you need, but both are camera codes which is why I gave both.
If it works, it will open a menu called Camera Firmware Std
You can check the firmware versions first if you like. If the phone fw is older than the cam fw, and you do this, it is possible you could loose some features. But if so, I imagine flashing the device firmware again will update back to where it should be.
To write the camera firmware, just choose Phone to Cam FW Write.
Good luck!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
halebopper said:
mrrocketdog,
Would that work if the camera doesn't work even when the Nandroid is restored (despite that fact that the camera was functional when the Nandroid was created)? Thank you.
Click to expand...
Click to collapse
i think that would be the point. the camera was functioal when the nand was created.
dont know exact function , but what about going into recovery and fixing permissions.
and going into settings>apps>camera and clearing cache ? wouldnt take but a minute and it already doesnt work so....
err on the side of kindness
mrrocketdog said:
i think that would be the point. the camera was functioal when the nand was created.
dont know exact function , but what about going into recovery and fixing permissions.
and going into settings>apps>camera and clearing cache ? wouldnt take but a minute and it already doesnt work so....
err on the side of kindness
Click to expand...
Click to collapse
Thank you for your response and the suggestions.
That point makes complete sense. However, what I'm saying is that I've restored s Nandroid from a state when the camera was functional. However, the camera still doesn't work despite restoring a Nandroid from a previously operational state. So, please correct me if I'm wrong, but, considering that, what good would extracting the apk from the Nandroid do if restoring the entire Nandroid doesn't make the camera work?
Regarding your second suggestion, I have tried clearing the app cache and fixing permissions, but it didn't work. I'll add this to my list of attempted fixes in my original post.
Thank you very much mrrocketdog. I sincerely appreciate your continued interest and support. I hope we can figure this out.
well dang it ! hopefully someone else will chime in with some ideas. sorry i didnt have anything new. will keep thinking.
err on the side of kindness
DocHoliday77 said:
At this point I think that would be worth a shot. If it doesn't work though I'd have to say it sounds like it could be hardware related, even though you replaced the module. Might be a problem on the motherboard or something like that.
The only other thing I can think to try though is to flash a 4.1.1 rom. Then using the hidden code to write the camera firmware to the device. If the firmware got corrupted somehow, this could fix it. The problem though, is if you've updated to 4.3 firmware, it probably won't work. They patched against our ability to write the cameras firmware ourselves. If this was done in the controlling app, it may just work. However, if it was patched in the base firmware, there won't be any way I know of to do this.
I'll post the code in a min. Gotta hunt it down again...
Sent from my SAMSUNG-SGH-I747 using Tapatalk
---------- Post added at 12:16 AM ---------- Previous post was at 12:07 AM ----------
Ok here are the codes:
*#34971539#
*#7412365#
Enter in the stock dialer.
I'm pretty sure the first one is the one you need, but both are camera codes which is why I gave both.
If it works, it will open a menu called Camera Firmware Std
You can check the firmware versions first if you like. If the phone fw is older than the cam fw, and you do this, it is possible you could loose some features. But if so, I imagine flashing the device firmware again will update back to where it should be.
To write the camera firmware, just choose Phone to Cam FW Write.
Good luck!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Hi DocHoliday77,
Thank you very much for the reply and the suggestion. Your advice seems sound.
I'm not sure what you mean by "controlling app." I'm afraid my knowledge is too limited to tell you if I've flashed the 4.3 firmware.
Not sure if this helps, but I have intentionally not upgraded beyond the stock baseband UVDMD5 version. I understand the baseband versions following UVDMD5 are bad due to the addition of KNOX and the inability to flash back to previous baseband versions.
Currently, I have flashed Carbon rom, which states the Android version is 4.4.4. However, I don't know if the Android version number is reflective of the firmware.
Regarding flashing a 4.1.1 rom, is there a rom you suggest that would be better for this than others? Should I just grab an older version of Carbon or would it be best to use Odin to flash back to a stock root66 version of 4.1.1 ?
Btw, not sure if you saw, but I uploaded a Catlog I recorded while trying to launch the camera app. I don't know if that will reveal anything or not. I can't make two cents of Catlogs other than to identify that errors are occurring. I really hope this isn't a faulty motherboard.
Thank you again for your continued interest and support. I really appreciate your advice. It means a lot. I hope we are able to resolve this.
If you never updated beyond 4.1.2, you can fully downgrade to 4.1.1 and try that method I posted. The app is just the one that controls the cameras dialer code. You don't really need to worry about it. Don't remember which it is right now anyway...
If you like though, first just flash stock 4.1.2. The code might work there. I just can't remember if it was patched there or in 4.3. You'll know you need 4.1 1 if you open it and the firmware write choice is greyed out.
I suggest just flashing the root66 firmware rather than a rom. This way everything you need is included. If it does solve the problem you can flash back to whatever you like.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
If you never updated beyond 4.1.2, you can fully downgrade to 4.1.1 and try that method I posted. The app is just the one that controls the cameras dialer code. You don't really need to worry about it. Don't remember which it is right now anyway...
If you like though, first just flash stock 4.1.2. The code might work there. I just can't remember if it was patched there or in 4.3. You'll know you need 4.1 1 if you open it and the firmware write choice is greyed out.
I suggest just flashing the root66 firmware rather than a rom. This way everything you need is included. If it does solve the problem you can flash back to whatever you like.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Ok Doc. I flashed root66 T999 UVDLJC (Official JB Firmware - Latest JB 4.1.1 Firmware). After rebooting the phone, I entered the first code you provided - *#34971539# - into the phone dialer. This pulls up an all black screen with a gray colored placeholder/header at the top that reads, "CameraFirmware Standard." Again, other than the gray header and title, the rest of the screen is all black with no text or anything, except for the notification bar at the very top. Then, after sitting on that screen for a few seconds, it closes and the message, "Unfortunately, Factory Test has stopped," displays in a pop-up message.
I can make my assumptions about what that means, but I'd prefer your opinion. What do you think?
Thank you again for your time, insight, and assistance. I respectfully look forward to your response.
p.s. Just to clarify my experience for potential future readers, the second code you provided - *#7412365# - didn't work. It displayed, "Unable to process request" in a pop-up message.
That tells me that the system is most likely having problems communicating with the camera.
I'd open it up and make sure it's properly connected. It's very easy to do. You can find disassembly videos on YouTube if you want to see what to look for first.
If the shop couldn't get a new one to work, I'm honestly not sure what else you can try. It does sound like a hardware issue though. My best guess is its got something to do with the motherboard.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Q&A for ArtMod Stock 4.4.2 LG G3 UI[9/6/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
GPS can not Lock
GPS cant lock when no data,,
Kwakublack
I don't have any problems on the artmod Rom. I fixed the data by using the apn fix and sideloaded the Sprint data flashed and saved!! Perfectly working phone!! Better than stock!! The only thing that doesn't work is the data icon on the quick settings won't lite up blue. And I can't get to network settings. Do you have a fix for that? Please help. Also I might addI flashed this by using framaroot and freegee!! No computer!!???. You're Rom is so much better than anyone else's for optimus g!! And the g3 UI is by far the prettiest and most functional out of all phones!!
---------- Post added at 03:31 PM ---------- Previous post was at 03:21 PM ----------
MIB_91 said:
I still did it. It did not help! Network always disappears, then reappears on the short-lived. APN settings always flies. I save, get out of them. Then again, I go and see what my options are not present. Field clean.
Click to expand...
Click to collapse
I don't have any problems on the artmod Rom. I fixed the data by using the apn fix and sideloaded the Sprint data flashed and saved!! Perfectly working phone!! Better than stock!! The only thing that doesn't work is the data icon on the quick settings won't lite up blue. And I can't get to network settings. Do you have a fix for that? Please help. Also I might addI flashed this by using framaroot and freegee!! No computer!!???. You're Rom is so much better than anyone else's for optimus g!! And the g3 UI is by far the prettiest and most functional out of all phones!!
kwaku israel said:
I don't have any problems on the artmod Rom. I fixed the data by using the apn fix and sideloaded the Sprint data flashed and saved!! Perfectly working phone!! Better than stock!! The only thing that doesn't work is the data icon on the quick settings won't lite up blue. And I can't get to network settings. Do you have a fix for that? Please help. Also I might addI flashed this by using framaroot and freegee!! No computer!!???. You're Rom is so much better than anyone else's for optimus g!! And the g3 UI is by far the prettiest and most functional out of all phones!!
---------- Post added at 03:31 PM ---------- Previous post was at 03:21 PM ----------
I don't have any problems on the artmod Rom. I fixed the data by using the apn fix and sideloaded the Sprint data flashed and saved!! Perfectly working phone!! Better than stock!! The only thing that doesn't work is the data icon on the quick settings won't lite up blue. And I can't get to network settings. Do you have a fix for that? Please help. Also I might addI flashed this by using framaroot and freegee!! No computer!!???. You're Rom is so much better than anyone else's for optimus g!! And the g3 UI is by far the prettiest and most functional out of all phones!!
Click to expand...
Click to collapse
Download "quick shortcut maker and search Network in the app. The second option under phone is Network settings. Choose that and select create shortcut. It will create a shortcut to network settings on your home page. I posted a picture of the app somewhere in the artmod thread as well as the GEE3 port thread.
KwakuIsrael
Thanks will try now.
KwakuIsrael
Thanks I found it cool. I need the link for the 5.3.1 ota fix. The link is broken. It keeps sending me to sound cloud.
kwaku israel said:
Thanks I found it cool. I need the link for the 5.3.1 ota fix. The link is broken. It keeps sending me to sound cloud.
Click to expand...
Click to collapse
Does the OTA not work? Go to the OTA app on your phone and find the update, it will let you download it and then you can flash it from recovery.
KwakuIsrael
I've downloaded the latest version update a fresh wipe and install and now I'm getting a no service msg. It's said no SIM So now I have no service. Everything was fine before this. What do you recommend?
---------- Post added at 01:35 PM ---------- Previous post was at 01:10 PM ----------
Downloaded the latest update and no service msg now and also won't read SIM. Had to flash previous version 5.2.1 which has no SIM problems but quite a few bugs. Is there a fix in the works? The first 5.3.1 version worked flawlessly.
kwaku israel said:
I've downloaded the latest version update a fresh wipe and install and now I'm getting a no service msg. It's said no SIM So now I have no service. Everything was fine before this. What do you recommend?
---------- Post added at 01:35 PM ---------- Previous post was at 01:10 PM ----------
Downloaded the latest update and no service msg now and also won't read SIM. Had to flash previous version 5.2.1 which has no SIM problems but quite a few bugs. Is there a fix in the works? The first 5.3.1 version worked flawlessly.
Click to expand...
Click to collapse
What do you mean the first 5.3.1 version? Also, Take the build.prop from the 5.2.1 and replace it in the 5.3.1 The reason you get that is because there are mods in the build.prop to be able to use on the ls970, but when you flashed the "official" update it wrote over the build.prop mods we did.
KwakuIsrael
Can you send me a link with the 5.2.1 build props and a new 5.3.1 zip. I don't know how to flash seperately. Thanks for being so helpful. I haven't flashed a Rom since froyo gingerbread days on my old LG optimus v lol. And thanks Art for the best Rom running right now. Also the links are down. They are taking me to sound cloud. And the ota isn't moving either.
KwakuIsrael
Thanks now let me get to it.
kwaku israel said:
Can you send me a link with the 5.2.1 build props and a new 5.3.1 zip. I don't know how to flash seperately. Thanks for being so helpful. I haven't flashed a Rom since froyo gingerbread days on my old LG optimus v lol. And thanks Art for the best Rom running right now. Also the links are down. They are taking me to sound cloud. And the ota isn't moving either.
Click to expand...
Click to collapse
I don't have the rom but I might be able to make you a flashable zip for the build.prop. Not today though. Maybe tomorrow. But all you really have to do is make a backup (just copy it somewhere else or pull it from /system inside the zip of 5.2.1 or the one from this thread) and then replace the one in the new update with the backup, and set the permissions the same as they were, reboot, and bam.
Here, I attached a 5.3 update (don't have 5.3.1) with the same build.prop with an updated custom OTA. It says 5.3 and is 5.3.
Flash this over the artmod rom.
https://drive.google.com/file/d/0B0cNwaZaUP7DTE9UeFhMdlAzUm8/view?usp=sharing
KwakuIsrael
I'm back to hopefully find a fix.
KwakuIsrael
Bricked need help security error
kwaku israel said:
Bricked need help security error
Click to expand...
Click to collapse
Did you attempt to relock the boot loader? Check out the softbrick thread, that should get you up and running. You'll need to flash a bin file using lgnpst and that's easy to install. Everything is in the soft brick thread.
Thanks the other way was far to complicated!! Plus I couldn't understand dudes accent!!? I'll have access to laptop in morning. I have the 5.3 to reflash but I'll have to flash 5.2 first because I bricked the phone before you sent me the link. Thanks so much my buddy!!
kwaku israel said:
Thanks the other way was far to complicated!! Plus I couldn't understand dudes accent!!�� I'll have access to laptop in morning. I have the 5.3 to reflash but I'll have to flash 5.2 first because I bricked the phone before you sent me the link. Thanks so much my buddy!!
Click to expand...
Click to collapse
Ha ha. What's the other way? Did you fund a YouTube video?
Here's the thread I meant if you didn't find it
http://forum.xda-developers.com/showthread.php?t=2230106
The other way was the long way flashing back to stock. Sorry I been gone so long had a lot of personal issues!! Thanks for all your help and fast response!! One important question for you my friend!!? What do you type in the command prompt to get teeny bin started?? I can't get back into recovery mode unless I have the right command to type & it's not in any of the you tube videos!! I see the art mod Rom is all the way up to 5.4 now. I know my nephew is dying to get his phone back running again. I also had to factory reset my HTC one because I downloaded an incompatible app and couldn't use my internal storage or music pictures movies etc.. Sense toolbox on unrooted phone. Didn't work to well. So therefore I had to start from scratch again!! I also need the Sprint data apk. That's how I got the data working on the optimus g on art mod 5.2!! Works without messing with the apn settings!! So much easier!! It's hard to find everything all over again. Can you please bail me out once more!! I also want to try the art mod Rom for my HTC one m7 as soon as I can find a safe way to root it!! I meant the Sprint data zip not apk.
kwaku israel said:
The other way was the long way flashing back to stock. Sorry I been gone so long had a lot of personal issues!! Thanks for all your help and fast response!! One important question for you my friend!!? What do you type in the command prompt to get teeny bin started?? I can't get back into recovery mode unless I have the right command to type & it's not in any of the you tube videos!! I see the art mod Rom is all the way up to 5.4 now. I know my nephew is dying to get his phone back running again. I also had to factory reset my HTC one because I downloaded an incompatible app and couldn't use my internal storage or music pictures movies etc.. Sense toolbox on unrooted phone. Didn't work to well. So therefore I had to start from scratch again!! I also need the Sprint data apk. That's how I got the data working on the optimus g on art mod 5.2!! Works without messing with the apn settings!! So much easier!! It's hard to find everything all over again. Can you please bail me out once more!! I also want to try the art mod Rom for my HTC one m7 as soon as I can find a safe way to root it!! I meant the Sprint data zip not apk.
Click to expand...
Click to collapse
I see what you mean now, command should be "adb reboot recovery" But I think you need download mode, which is a combination of buttons, not a command. Try pressing volume up and down, holding power, then releasing when the phone flashes. Or hold volume up and power, then when the menu comes up I think you can select "download mode"
I understand the button push part. I was reffering to the part where it' says the phone should reboot at 67% or 83%. That's why I wanted to know what to type in. So do I type in "adb reboot recovery" then run and if that fails do the button press? I just wanted to get get the teeny bin moving. So far I have had it plugged in to download mode not knowing how to proceed from there.
hey everyone
so i flashed lineage os 7.1 on my zuk z2 and everything was working perfect
after that i tried aicp 13.1 nightly and it was also working flawlessly but problem arrived as i used the gcam port for hdr+ in snapdragon 820 devices, initially the camera worked fine and everything was working normal but suddenly after some time whenever i opened gcam my phone hanged and then went into fastboot mode itself(the notification light is on ) and after i rebooted the phone it went into bootloop.
then after doing too many reboots finally my phone started and i changed the rom as i thought it might be a rom problem but in every rom whenever i tried to use gcam or even whatsapp default camera my phone suffered the same problem every time so i reflashed the stock zui firmware but the problem still persists as whenever i uses my stock cam or any other camera my phone goes into bootloop
when i searched the web i wasn't able to find a single thread related to my problem
really worried
please help
any help would be appreciated
*sorry i'm a noob to all this flashing etc*
also the bootloop occurs only after using the camera otherwise everything works fine
!!!!!!!!!!!!!!!!!!!!PLEASE HELP URGENTLY!!!!!!!!!!!!!!!!!!!!!!
Very strange issue. Dont know why that happens to you.
Which camera are you using? Try BSG port, v1a. Im using it and it works great. https://drive.google.com/file/d/1ubVpPrrZRkvVPH9qT7XzlttwcCVPxUcM/view?usp=sharing
Also try this, which i did also. Flash with qfil ZUI Oreo 243 version, you have thread for this, Jintu jose is OP.
It didnt lock my bootloader, and it didnt encrypt my phone memory.
Flash TWRP
Flash latest AEX Oreo
Flash GZR gapps
Magisk (you have to do it two times, once when u install rom, let it boot, than again flash in recovery)
Install google camera i posted and try.
This setup is working great for me.
I've tried every possible version of gcam but it happens always
Now the main problem is that I can't even use my stock camera app as whenever camera opens it goes into bootloop
I've flashed the stock ROM using qpst tool
But the problem persisted
Can anyone please tell me what should I do?
Is this a problem with my kernel?????
What should I do?
I am currently using aex latest version ?
Thanks for the reply but please help
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@vuckovic_stefan please help!!!!
avi badak said:
@vuckovic_stefan please help!!!!
Click to expand...
Click to collapse
You said in previous post that you flashed stock rom via qfil
Tell me is camera working fine with stock rom?
@vuckovic_stefan no the problem remained same even with the stock camera of my phone
avi badak said:
@vuckovic_stefan no the problem remained same even with the stock camera of my phone
Click to expand...
Click to collapse
Than I would say it is hardware problem man
If you have warranty, flash stock rom, I think 1.9 lock bootloader, and reclaim warranty
I say this because I never had this problem, ever, on any custom rom nor stock
Can I reclaim the warranty after locking the bootloader
avi badak said:
Can I reclaim the warranty after locking the bootloader
Click to expand...
Click to collapse
Yes you can, just make sure there are no traces of any type of modifications.
Can you tell me the steps so that there are no traces left
avi badak said:
Can you tell me the steps so that there are no traces left
Click to expand...
Click to collapse
Flash zui 1.9 by qfil method.
Everything should be stock.
Fir step by step guide, search on xda discussion section.
There are several guides
Thanks for the help
Will let everyone know about the problem if I found one
the same thing that happen with mi zuk z2 but changing the rom to a another witch no uses the lineage os kernel solve the problem
I have the same problem the camera only works on the stock Android 6, maybe someone will find a solution for the guarantee it's impossible to hand over the phone purchased with AliExpress.
Hi, i have a similar issue with my ZUK, i have changed ROM, and after flashing it went to constant bootloop. i thought it might have been an issue with the rom, so i flashed again, but the problem stayed. Phone started and gapps were installed ok. It worked well for a bit and then it went to bootloop again (last time was when i switched from camera to video). I have formated data, to start clean, flashed rom again, but this time it got stuck on the ''android'' logo and doesnt seem to go further. Phone is recognisable by my PC and i have access to internal memory.
I have same problem now ...nothing working for me ..please help
avi badak said:
Thanks for the help
Will let everyone know about the problem if I found one
Click to expand...
Click to collapse
Sir one I've the same problem.
Did you find any solution?
Please share if you did.
---------- Post added at 09:45 PM ---------- Previous post was at 09:45 PM ----------
Rufjan said:
Hi, i have a similar issue with my ZUK, i have changed ROM, and after flashing it went to constant bootloop. i thought it might have been an issue with the rom, so i flashed again, but the problem stayed. Phone started and gapps were installed ok. It worked well for a bit and then it went to bootloop again (last time was when i switched from camera to video). I have formated data, to start clean, flashed rom again, but this time it got stuck on the ''android'' logo and doesnt seem to go further. Phone is recognisable by my PC and i have access to internal memory.
Click to expand...
Click to collapse
I've the same problem.
Did you find any solution?
MohdAhmed said:
Sir one I've the same problem.
Did you find any solution?
Please share if you did.
---------- Post added at 09:45 PM ---------- Previous post was at 09:45 PM ----------
I've the same problem.
Did you find any solution?
Click to expand...
Click to collapse
Yes, unfortunately it turned out that the battery has been damaged and that was just nit enough voltage to startup the phone, I have replaced the battery myself for cost of approx 15 usd. It is very easy to open the phone ad replace it, as all tools are included with battery, you just need a hairdryer to melt the acrylic tape holding the glass back of the phone.
Rufjan said:
Yes, unfortunately it turned out that the battery has been damaged and that was just nit enough voltage to startup the phone, I have replaced the battery myself for cost of approx 15 usd. It is very easy to open the phone ad replace it, as all tools are included with battery, you just need a hairdryer to melt the acrylic tape holding the glass back of the phone.
Click to expand...
Click to collapse
Sir but in my case I can go to twrp recovery easily, without any issues.
After your battery replacement the phone was back to normal self, i.e the room you previously installed was working without any issues?
Or did you had to use qfil and start from stock 2.5 zui and then re unlock bootloader and install twrp and custom ROM?
Hi Everyone, thanks for helping me,
I have XT1789-05, Some apps can't access internet and some apps can access internet, with WiFi or Mobile Data, nothing change, in another device the apps not working in My Moto Z2 Force, will work fine, even I have Moto X 1st, all apps work fine in the Moto X, but in the Moto Z2, some apps when opened error can't access the internet, I searched and googled everywhere, I can't find a solution, can you help me please?
I already did a clear cache, clear data, uninstall and install again, only some apps has this issue, it's a completely strange problem, for example, this app not work as well: Ziraat Mobile (This app for Ziraat Bank in Turkey) here is the Google Play download link: play.google.com/store/apps/details?id=com.ziraat.ziraatmobil
I can't add URL, adding by yourself, please
another app: Radio Javan
play.google.com/store/apps/details?id=com.radiojavan.androidradio
please help me to solve this issue
one time I uninstalled Antivirus (Eset Mobile Security) as well, or any apps I thought to cause the problem, still I have the problem, I'm completely confused, please help me, I have one XT1789-02 and it's working fine with same apps, but my Phone XT1789-05 has problems!!!!!!!!
The Best Paul and Joseph Galvin (I Will Love Motorola Ever...)
Hi,
Did it work well before?
Did you do a full fw flashing before?
Have you tried to change the radio in *#*#4636#*#* yet?
mr_5kool said:
Hi,
Did it work well before?
Did you do a full fw flashing before?
Have you tried to change the radio in *#*#4636#*#* yet?
Click to expand...
Click to collapse
It's a new Phone
No Full Flashing before or even now
I tried to change Radio, thanks for your trick, but it does not work!!!!
I still need your help
It's a weird problem. I think you should do a full fw flashing if you bought a 2nd phone. If it's a brand new one, I have no idea about this situation :"|
mr_5kool said:
It's a weird problem. I think you should do a full fw flashing if you bought a 2nd phone. If it's a brand new one, I have no idea about this situation :"|
Click to expand...
Click to collapse
I have no Idea too, I'm going to crazy,
Have you tried a factory reset and use a different Google account? It could be restoring a setting or app causing it
Uzephi said:
Have you tried a factory reset and use a different Google account? It could be restoring a setting or app causing it
Click to expand...
Click to collapse
I used new account no restore anything, I don't want to reset factory because, I have Internet Bank with a digital sign, and I'm abroad, can't go to the bank, so reset factory not a good option
thanks a lot, give me another solution please
AHMN48 said:
I used new account no restore anything, I don't want to reset factory because, I have Internet Bank with a digital sign, and I'm abroad, can't go to the bank, so reset factory not a good option
thanks a lot, give me another solution please
Click to expand...
Click to collapse
I can't help further unless you cooperate to troubleshoot. When you are able to factory reset to nuke any stuck bits and start fresh on a new Google account, (not a secondary one you already have, a brand new one) then we can try pulling a log from a fresh install to see what is blocking it.
Edit: the factory reset would need to be followed up with a fastboot -w command to ensure everything is wiped. If you don't want to do this, then you cannot be helped.
Uzephi said:
I can't help further unless you cooperate to troubleshoot. When you are able to factory reset to nuke any stuck bits and start fresh on a new Google account, (not a secondary one you already have, a brand new one) then we can try pulling a log from a fresh install to see what is blocking it.
Edit: the factory reset would need to be followed up with a fastboot -w command to ensure everything is wiped. If you don't want to do this, then you cannot be helped.
Click to expand...
Click to collapse
so what next?
I did several times reset factory
one time from Setting
and two times from Recovery Mode
Still has the problem on some apps, ohhhh my god, I'm driving crazy!!!!!
I don't know what's the problem, some apps force close, some apps can't access the internet and most apps work fine
help me, please
is it grey import?
AHMN48 said:
so what next?
I did several times reset factory
one time from Setting
and two times from Recovery Mode
Still has the problem on some apps, ohhhh my god, I'm driving crazy!!!!!
I don't know what's the problem, some apps force close, some apps can't access the internet and most apps work fine
help me, please
Click to expand...
Click to collapse
Did you buy it online?
Besides the model, what is your software channel and build number for your phone?
i had similar problem and factory reset still resulted with the same issue. I had to do a full retail rom reinstallation and that fixed the problem.
harkoliar said:
Did you buy it online?
Besides the model, what is your software channel and build number for your phone?
i had similar problem and factory reset still resulted with the same issue. I had to do a full retail rom reinstallation and that fixed the problem.
Click to expand...
Click to collapse
Yes, I bought it online from coolicool.com, this is first time ever I bought one Moto from outside of USA,
Software Channel: retcn
Build Number: OPXS27.109-52-10
Thanks for helping me
The model and build is exactly like mine when I first got it.
First off, I think it's how they flashed the rom that's causing the instability. Your phone would most likely have it's bootloader unlocked like mine but they did something to hide the warning message.
Please read my thread.
https://forum.xda-developers.com/z2-force/help/request-advice-experts-tourbleshooting-t3928349
You will see that I flashed a retail rom using instructions from this thread. It would be step E of the thread. Worked like a charm for me in fixing all the unstable apps
https://forum.xda-developers.com/z2-force/how-to/guides-bootloader-twrp-custom-roms-root-t3805737
You will have to flash your phone so you really have to follow the step by
step instructions.
I did it for the first time in my thread, it's not hard to do step E if you follow it step by step.
Hah, mine was from coolicool with random issues too. Emailed them, no response. Paypal claim, no respond. Full refund!
Will follow the guide above.
Just check first if bootloader is unlocked. (That's step a). Before you proceed to step E.
I'm assuming it's already unlocked because we have the same issues, build and model number. Mine was unlocked when I received mine. Also from China/hk
harkoliar said:
Just check first if bootloader is unlocked. (That's step a). Before you proceed to step E.
I'm assuming it's already unlocked because we have the same issues, build and model number. Mine was unlocked when I received mine. Also from China/hk
Click to expand...
Click to collapse
why it's unlocked?
it's not Original and it's not from Motorola?
I saw in bootloader it's flashing_unlocked and I was surprised why unlocked????
are you sure if I do these steps problem will solve and also are you sure after installing new stock ROM dual sim work well?
AHMN48 said:
why it's unlocked?
it's not Original and it's not from Motorola?
I saw in bootloader it's flashing_unlocked and I was surprised why unlocked????
are you sure if I do these steps problem will solve and also are you sure after installing new stock ROM dual sim work well?
Click to expand...
Click to collapse
This is my pure speculation. the reason why its unlocked is because it was originally a chinese phone with chinese roms that doesnt have playstore. That must have been the original setting. Since they want to sell it to the international market, they had to unlock the phone and voiding the warranty, flash it with the new international rom before selling it.
Since its unlocked, essentially the warranty on your phone is void. The issue i found is that they must have flashed the wrong rom so its causing all these apps to crash.
Again thats all speculation and theory.
Now the only reason why I'm suggesting this method with you is because I had the same issue, I researched and tried the solution I posted. It worked for me. If you are going to flash a stock rom for the first time, you just do your research and do it one step at a time. Instructions have been provided in the second link (step E) including all the files you require to install the retail rom. It worked for me. I can only suggest, but it's up for you to give it a go.
I loaded the latest RETAIL (-05) factory image and all apps are functioning fine now. Issue was supplier had flashed -06 ROM, assuming because it said APAC in the description.
happy it worked
ben0551 said:
I loaded the latest RETAIL (-05) factory image and all apps are functioning fine now. Issue was supplier had flashed -06 ROM, assuming because it said APAC in the description.
Click to expand...
Click to collapse
glad it worked!
harkoliar said:
glad it worked!
Click to expand...
Click to collapse
I was so confused during the last month. The random apps that were impacted by the issue didn't make sense...
Banking app
ABC Kids Listen App
Kids Daycare App
FuelCheck
Images on CyberFlix
Only one of the devs managed to get their app working for me in the odd state it was in. DayCare app of all things!
Thanks for posting, I wouldn't have thought to reflash or even look at the region code of the flashed rom compared to the compatible one.
ben0551 said:
I was so confused during the last month. The random apps that were impacted by the issue didn't make sense...
Banking app
ABC Kids Listen App
Kids Daycare App
FuelCheck
Images on CyberFlix
Only one of the devs managed to get their app working for me in the odd state it was in. DayCare app of all things!
Thanks for posting, I wouldn't have thought to reflash or even look at the region code of the flashed rom compared to the compatible one.
Click to expand...
Click to collapse
Yeah it was so random, i really thought i got a faulty phone. Mine was all GPS/ internet related (Uber, Spotify, maps)
Nothing made sense but I took the research and decided to flash to stock rom, discovering they installed the wrong ROM and HIDING the fact the bootloader was unlocked. Definitely not your average issue and hopefully this would help other people who are in similar situation buying from any china/hk store.
I even bought the moto mods, and they are working perfectly after reflashing. Pretty happy with overall result.