I've unlocked my bootloader, and tried to install TWRP (the BND-L21 version, it seemed to work fine for other US users) so I could flash a generic boot image like LineageOS 15. It flashed without problems, but when trying to boot to it, I get the following error:
Attention!
Please update system again
[picture of open Android logo]
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
However, I can boot into the system without problems. I've tried to use erecovery to download the firmware and install the update, but that failed.
Is there a way I can either:
A. Install TWRP so I have a recovery? or
B. Install the default firmware so I can have the stock recovery?
P.S. Here's the command I used:
HTML:
fastboot flash recovery_ramdisk (name of recovery file here)
ZentixZaneic said:
I've unlocked my bootloader, and tried to install TWRP (the BND-L21 version, it seemed to work fine for other US users) so I could flash a generic boot image like LineageOS 15. It flashed without problems, but when trying to boot to it, I get the following error:
Attention!
Please update system again
[picture of open Android logo]
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
However, I can boot into the system without problems. I've tried to use erecovery to download the firmware and install the update, but that failed.
Is there a way I can either:
A. Install TWRP so I have a recovery? or
B. Install the default firmware so I can have the stock recovery?
P.S. Here's the command I used:
fastboot flash recovery_ramdisk (name of recovery file here)
Click to expand...
Click to collapse
Happened the same thing with me and i easily had the work around..
But this thread doesnt belong here..
And are you able to access the rom which you installed? Or it straight away goes to erecovery or the error page?
sid21 said:
Happened the same thing with me and i easily had the work around..
But this thread doesnt belong here..
And are you able to access the rom which you installed? Or it straight away goes to erecovery or the error page?
Click to expand...
Click to collapse
The ROM I have installed is the stock EMUI 8.0 ROM. I can boot into it without problems. It only shows the error page if I try to boot into the recovery.
ZentixZaneic said:
The ROM I have installed is the stock EMUI 8.0 ROM. I can boot into it without problems. It only shows the error page if I try to boot into the recovery.
Click to expand...
Click to collapse
Just go through this threads last few pages.. U would probably have to fastboot flash the kernel and/or recovery..
The guy who owns the thread will help you.. He helped me recover too..
The commands are written in last few pages..
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649/page6
same here help me!! i got the same error while booting ?? please give me the solution
ZentixZaneic said:
I've unlocked my bootloader, and tried to install TWRP
Attention!
Please update system again
[picture of open Android logo]
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
However, I can boot into the system without problems. I've tried to use erecovery to download the firmware and install the update, but that failed.
Is there a way I can either:
A. Install TWRP so I have a recovery? or
B. Install the default firmware so I can have the stock recovery?
P.S. Here's the command I used:
HTML:
fastboot flash recovery_ramdisk (name of recovery file here)
Click to expand...
Click to collapse
please help i got the same error ??
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
mrmazak said:
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
Click to expand...
Click to collapse
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
I give my phone to a friend to work on it. If he can't fix it I try new multi tools version to flash phone.
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
I ever have similiar problem with you dude, but it's solved now, if you always stuck on " its OK but when my phone want to start its stuck on google page "just a sec...", its call google accont verification, i'll by bypass with this script, save as to .bat and put on adb folder
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
in fastboot type:
fastboot -w
after all it's works to me to bypass google account verification
and if now your problem is
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
i solve with re-flash system from this
https://androidfilehost.com/?fid=673956719939830152
fastboot flash system system.img
and doing TWRP Flashing
https://forum.xda-developers.com/devdb/project/?id=25826#downloads
fastboot flash recovery_ramdisk complete_twrp_ramdisk.img
and voila my problem solved..
mrmazak said:
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Click to expand...
Click to collapse
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Mohammadreza76646 said:
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Click to expand...
Click to collapse
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
mrmazak said:
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
Click to expand...
Click to collapse
It have stock recovery.
Mohammadreza76646 said:
It have stock recovery.
Click to expand...
Click to collapse
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
mrmazak said:
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
Click to expand...
Click to collapse
No. System boot successfully!
I will send you screenshot:
Mohammadreza76646 said:
No. System boot successfully!
I will send you screenshot:
Click to expand...
Click to collapse
here you are
Mohammadreza76646 said:
here you are
Click to expand...
Click to collapse
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
mrmazak said:
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
Click to expand...
Click to collapse
Thanks )
I'm so sorry for my posts, it's because I don't have a stable connection and I can't see notification of my thread.
I gave my phone to friend an he fix IMEI (I don't know how)
But OEM is steel lock.
I think he did it with using special box.
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!![/QUOTE
Are u able.to boot into twrp ?
Click to expand...
Click to collapse
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
IonDEfeso said:
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
Click to expand...
Click to collapse
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Do you know what the boot.img files name is after extraction?
I have extracted all 3 update zips and cannot find anything called boot.img
By the way, thank you.. After updating magisk I have been dealing with failed recovery and failed boot for over a week and this is the first reply anywhere that looks promising
IonDEfeso said:
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
Click to expand...
Click to collapse
if you were on oreo. then there is not a boot.img, instaed there is seperate ramdisk.img and kernel.img.
i have all the files already extracted for oreo and a backup from nougat as well.
https://androidfilehost.com/?w=files&flid=265998
make sure you know what you are doing before flashing.
for example. on oreo the boot and recovery share one kernel image. SO if kernel is messed up you will not be able to boot "boot" or "recovery"
DISCLAIMERS:
This help is specific for MERLIN devices only !
(Xiaomi Redmi Note 9 and Xiaomi Redmi 10X 4G)
Keep atention. This is an UNOFFICIAL thread.
This thread was based on the thread by Agent_fabulous. Thank you very much !
DON'T ask by PM. If you have any question, reply to this thread.
Keep in mind, nothing is 100% perfect, so you need to read careful
and keep trying before to ask an already answered question.
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Sorry for my bad english.
GOOD LUCK
1. Where can I find official and untouched STOCK FIRMWARES ROMS?Here, you can find latest releases: https://xiaomifirmwareupdater.com/miui/merlin/Here, you can find archive of releases: https://xiaomifirmwareupdater.com/archive/miui/merlin/
2. Where can I find some useful tools?Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.com/Sp Flash Tool: https://spflashtools.com/category/windowsMi PC Suite: http://pcsuite.mi.com/
3. There are useful tools for LINUX or Mac OS?Xiaomitool (Linux & MacOS): https://www.xiaomitool.com/V2/Sp Flash Tool (Linux): https://spflashtools.com/category/linux
4. My pc can't detect my phone. What to do?Probably, you need to install appropriate usb drivers.Try this: https://androidmtk.com/download-mtk-usb-all-drivers
5. Where can I find custom ROMs?Here, you can find the collection of custom ROMs for MERLIN: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4291423/
6. How can I root?First and obviously, you need to unlock your bootloader. Once you unlock your bootloader, you can root your device flashing magisk patched boot.img.Here, you can find magisk patched boot images: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/KEEP ATENTION: you need to disable verification for vbmeta too.Here, you can find patched vbmeta with disabled verification: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218909/
7. Where can I find TWRP & PBRP?There is only ONE recovery project with open source for MERLIN.But, there are other twrp and pbrp with closed source.If you use it, you can cause damages to your device, use at your own risk and DON'T ask about it.KEEP ATENTION: you need to IGNORE misc partition, if you flash the misc partition, your phone can be stucked in boot loop.Here, you can find recovery projects images: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227751/KEEP ATENTION: you need to disable verification for vbmeta too.Here, you can find patched vbmeta with disabled verification: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218909/
8. How can I restore the state of UNLOCKED BOOTLOADER?You need to restore your backup of SECCFG partition.Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
9. How to make TWRP V11.0.4.0 work on MIUI V12.0.5.0 or higher?If you are using MIUI V12.0.5.0 or higher, TWRP V11.0.4.0 will not work.Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223077/You will need to flash an older LK partition.Here, you can find lk images: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
10. How can I disable TWRP?You will need to flash original stock recovery.img.Here, you can find original stock recovery images: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
11. How to flash using SP FLASH TOOL without EDL and authentication?If you want to use flash tool on MIUI V12.0.5.0 or higher, it will requires EDL and authentication.Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223089/
12. I am on MIUI V12.0.5.0 or higher, how can I flash using SP FLASH TOOL without EDL and authentication?You will need to flash an older PRELOADER binary.Here, you can find preloader binaries: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218929/
13. I am on MIUI V12.0.4.0 or lower, how can I flash using SP FLASH TOOL without EDL and authentication?You will need the specific DA (download-agent) file for it without authentication (#NoAuth #NoAuthentication #No-Auth #No-Authentication).Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
14. How can I downgrade MIUI version?For downgrading your miui, you need unlocked bootloader.After unlocked bootloader, you can flash older firmware rom using fastboot or sp flash tool.
15. My phone is booting to a black screen after flashed misc partition together twrp. What to do?If your phone is booting to a black screen, you need to erase MISC partition.Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
16. My phone got bootlop after installed a Magisk module or Xposed module. How can I disable it?You will need to uninstall the module. You have two methods for this.For first method, you can disable Magisk (read question 17).For second method, you need to boot in emergency mode (rescue mode).For booting in emergency mode, you need to press Vol+ (volume up) after boot starts. (YES, I mean AFTER you see boot logo.)And then, you can uninstall the module.
17. My phone got bootlop after flashed Magisk. How can I disable it?You will need to flash original stock boot.img.Here, you can find original stock boot images: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
18. My phone got bootloop, I am on MIUI V12.0.4.0 or lower and I can't enter in fastboot mode or recovery mode. What to do?You need to flash stock rom using sp flash tool.Please, read question 13.
19. My phone got bootloop, I am on MIUI V12.0.5.0 or higher and I can't enter in fastboot mode or recovery mode. What to do?For this, you will need to bypass authentication and flash in EDL mode with NO auth for FREE.Here, you can find the guide for bypassing EDL authenticated mode for FREE: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/For this, you will need an authorized account for flashing in EDL mode.You need to go the service centre for professional assistance.Please, read this: https://www.xda-developers.com/xiaomi-edl-unbrick-authorized-mi-accounts/
20. There is any other way for flashing or unbricking?Yes. You can try any useful tool (read question 2 and 3).But, this help is not for how use them.You can find a huge amount of videos in youtube about it.
21. I want to keep with original stock boot.img together TWRP, but TWRP is removed at every reboot. What to do?You will need to flash patched boot image without overwrite of recovery.Please, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209263/KEEP ATENTION: you need to disable verification for vbmeta too.Here, you can find patched vbmeta with disabled verification: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218909/
22. Where can I find scatter files to flash using flash tool?Here, you can find scatter files: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
23. Where can I find readback file to backup using flash tool?Here, you can find read back file: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223109/
24. How can I know what is working on my phone before installing?If you want to know what is working for MERLIN, read this: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
25. How can I disable preinstalled apps without uninstalling them?You need to perform this in command line:pm disable-user --user 0 com.android.chrome(Change com.android.chrome to desired package name to disable.)
26. Where can I find source code of the kernel?Here, you can find the OFFICIAL source code of the kernel: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/merlin-r-oss and https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/lancelot-q-ossHere, you can find the OFFICIAL source code of the kernel modules: https://github.com/MiCode/MTK_kernel_modules/tree/merlin-r-oss and https://github.com/MiCode/MTK_kernel_modules/tree/lancelot-q-oss
27. Where can I find device tree and other sources codes of MT6768?-> https://github.com/Jebaitedneko/omni_device_xiaomi_merlin-> https://github.com/Redmi-MT6768/android_device_xiaomi_merlin-> https://github.com/Redmi-MT6768/android_kernel_xiaomi_mt6768-> https://github.com/Redmi-MT6768/android_vendor_xiaomi_merlin-> https://github.com/AndroidBlobs/device_xiaomi_merlin-> https://github.com/AndroidBlobs/vendor_xiaomi_merlin-> https://github.com/SparXFusion/android_device_xiaomi_merlin-> https://github.com/SparXFusion/android_kernel_redmi_mt6768-> https://github.com/JamieHoSzeYui/android_device_xiaomi_merlin-> https://github.com/surblazer/android_device_xiaomi_merlin-> https://github.com/surblazer/android_kernel_xiaomi_mt6768-> https://github.com/ZyCromerZ/android_kernel_xiaomi_mt6768-> https://github.com/Box-boi/android_kernel_xiaomi_mt6768-> https://github.com/Box-boi/omni_device_xiaomi_merlin-> https://github.com/Box-boi/android_device_xiaomi_merlin-> https://github.com/Box-boi/android_vendor_xiaomi_merlin-> https://sourceforge.net/projects/zyc-kernels/files/Merlin
28. How to pass SafetyNet?You will need to have Xposed installed. After it, everything you need to do is install HiddenCore-Module, active it on Xposed Manager and reboot.Here, you can find the HiddenCore-Module: https://repo.xposed.info/module/com.cofface.ivaderKEEP ATENTION: it is making android to keep on activity forever and never suspends screen.You can use the patched apk by Evengard: https://forum.xda-developers.com/t/hiddencore-module-what-was-it-doing.3903984/post-81982121.
29. How to disable ads (advertising)?You will need to have Xposed installed. After it, everything you need to do is install AdBlocker-Reborn, active it on Xposed Manager and reboot.Here, you can find the AdBlocker-Reborn: https://repo.xposed.info/module/com.aviraxp.adblocker.continuedKEEP ATENTION: some people said it can get troubles to google apps.
30. How to restore IMEI, Baseband, MAC, fix NVRAM WARNING and fix NVDATA CORRUPTED?KEEP ATENTION: never try to restore partitions from a different device, or you can brick and cause damages to your device.Here, you can find the guide: https://forum.xda-developers.com/t/...-on-merlin-redmi-note-9-redmi-10x-4g.4230423/
31. How to disable ads (advertising) without xposed?For unrooted devices, you need to perform this in command line:pm disable-user --user 0 com.miui.msa.globalFor rooted devices, you need to debloat your system and then remove the "MSA" app.
32. What should I backup before trying to customize my device?Here, you can find the list of what partitions you need to backup for avoiding mistakes without risking all of your device's identification details, like IMEI, WiFi MAC, Bluetooth MAC, calibration data, NVDATA, NVRAM, RADIO/MODEM/BASEBAND and others: https://forum.xda-developers.com/t/...lin-device-redmi-note-9-redmi-10x-4g.4229629/
33. How to bypass authentication and flash in EDL with NO auth for FREE?Here, you can find the guide for bypassing EDL authenticated mode for FREE: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
34. How to install XPOSED?1. You need to unlock your bootloader.2. You need to root using Magisk.3. You need to install magisk manager.4. You need to install the magisk module: RIRU. (Only Riru in the name).5. You need to choose between EDXPOSED or LSPOSED and then install the magisk module: "Riru Edxposed" or "Riru Lsposed".6. You need to install the properly manager: "Edxposed Manager" or "Lsposed Manager".7. Reboot.Done. Enjoy !
35. How to remove and clear GOOGLE ACC and Mi ACC / MiCloud?Here, you can find the guide for removing google account and xiaomi account: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4233977/
36. How can I flash a CUSTOM ROM?Here, you can find the guide for flashing custom roms by c.whoopee: https://forum.xda-developers.com/t/...rom-on-a-redmi-note-9-global-variant.4234151/(Thanks to c.whoopee)Here, you can find the guide for installing a Lineage 17.1 ROM by ma259: https://forum.xda-developers.com/t/...eage-17-1-rom-in-redmi-note-9-merlin.4235003/(Thanks to ma259)
37. How to properly use the SP Flash Tool?Here, you can find the guide how to configure correctly the SPFlashTool: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/Here, you can find common errors of the SPFlashTool: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
38. How to solve "LIB DA not match" error?Please, follow the guide "How to properly solve the errors of the SP FLASH TOOL": https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
39. How to solve "PMT changed for the ROM" error?Please, follow the guide "How to properly solve the errors of the SP FLASH TOOL": https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
40. How to solve "STATUS_BROM_CMD_STARTCMD_FAIL" error?Please, follow the guide "How to properly solve the errors of the SP FLASH TOOL": https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
41. How to solve "STATUS_SEC_AUTH_FILE_NEEDED" error?Please, follow the guide "How to properly solve the errors of the SP FLASH TOOL": https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
42. How to solve "STATUS_BROM_CMD_FAIL" error?Please, follow the guide "How to properly solve the errors of the SP FLASH TOOL": https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
43. How to solve "STATUS_BROM_CMD_SEND_DA_FAIL" error?Please, follow the guide "How to properly solve the errors of the SP FLASH TOOL": https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/44. Where can I find official ENGINEERING ROMs?Here, you can find ENGINEERING ROM V1: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227933/Here, you can find ENGINEERING ROM V2: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4246891/
45. Where can I find extracted FIRMWARES?Here, you can find the thread of the EXTRACTED FIRMWARE by yshalsager: https://forum.xda-developers.com/t/...-4g-redmi-note-9-merlin-auto-updated.4250261/Here, you can find latest releases: https://xiaomifirmwareupdater.com/firmware/merlin/Here, you can find archive of releases: https://xiaomifirmwareupdater.com/archive/firmware/merlin/
46. Where can I find extracted VENDORS?Here, you can find latest releases: https://xiaomifirmwareupdater.com/vendor/merlin/Here, you can find archive of releases: https://xiaomifirmwareupdater.com/archive/vendor/merlin/
47. How can I mount system RW (read-write) ?Here, you can find the guide and the script by lebigmac for mounting system as read-write (RW): https://forum.xda-developers.com/t/...unt-system-read-write-super-no_super.4247311/
48. How to write and recover the IMEI for SLOT 1 and SLOT 2?Here, we are discussing about the possibilities of how to recover the IMEI for SLOT1 and SLOT2: https://forum.xda-developers.com/t/...-in-merlin-redmi-note-9-redmi-10x-4g.4258779/Here, you can find md1img images of the baseband/modem/radio: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4258919/49. Where can I find custom KERNEL?-> https://sourceforge.net/projects/zyc-kernels/files/Merlin/-> https://github.com/JamieHoSzeYui/dream/releases-> MOD EDIT: Link Removed50. How to skip & avoid EDL auth bypass and FLASH in DOWNLOAD MODE?Here, you can find the guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4322631/
Full List of My Own Threads:
[V12.5.2.0][Android 11.0] New Update: Download Files for Merlin V12.5.2.0.RJOMIXM
https://forum.xda-developers.com/t/...-0-rjomixm-redmi-note-9-redmi-10x-4g.4357045/
[V12.5.1.0][Android 11.0] New Update: Download Files for Merlin V12.5.1.0.RJOMIXM
https://forum.xda-developers.com/t/...-0-rjomixm-redmi-note-9-redmi-10x-4g.4321093/
[V12.0.1.0][Android 11.0] New Update: Download Files for Merlin V12.0.1.0.RJOMIXM
https://forum.xda-developers.com/t/...-0-rjomixm-redmi-note-9-redmi-10x-4g.4295435/
[V12.0.8.0] New Update: Download Files for Merlin V12.0.8.0.QJOMIXM
https://forum.xda-developers.com/t/...-0-qjomixm-redmi-note-9-redmi-10x-4g.4285863/
[V12.0.7.0] New Update: Download Files for Merlin V12.0.7.0.QJOMIXM
https://forum.xda-developers.com/t/...-0-qjomixm-redmi-note-9-redmi-10x-4g.4245351/
[BOOT][PATCHED] Boot Image Partition without OVERWRITE OF RECOVERY for MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209263/
[DA][FLASH] DA files for flashing to MERLIN using FLASH TOOL
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
[V1][ENGINEERING][ROM] OFFICIAL Egineering Firmware for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227933/
[V2][ENGINEERING][ROM] OFFICIAL Egineering Firmware for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4246891/
[FAQ][GUIDE][HELP] Assistance Solution Centre for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
[DISCUSSION][ROM][CUSTOM] What is the BEST CUSTOM ROM for MERLIN ?
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4291423/
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE
https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
[GUIDE]How to properly solve the errors of the SP FLASH TOOL for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
[GUIDE] How to properly use the SP FLASH TOOL for MERLIN ?
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
[GUIDE] How to remove and clear GOOGLE ACC and Mi ACC / MiCloud for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4233977/
[GUIDE] How to restore IMEI, Baseband, MAC, fix NVRAM WARNING and fix NVDATA CORRUPTED on MERLIN ?
https://forum.xda-developers.com/t/...-on-merlin-redmi-note-9-redmi-10x-4g.4230423/
[GUIDE] What should I backup before trying to customize my MERLIN device ?
https://forum.xda-developers.com/t/...lin-device-redmi-note-9-redmi-10x-4g.4229629/
[GUIDE][FLASH] How to keep flashing without AUTH or EDL on V12.0.5.0 or higher MIUI versions in MERLIN ?
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223089/
[GUIDE][TWRP] How to keep TWRP V11.0.4.0 working on MIUI V12.0.5.0 or higher MIUI versions in MERLIN ?
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223077/
[DISCUSSION] How to write and recover the IMEI for SLOT 1 and SLOT 2 in MERLIN ?
https://forum.xda-developers.com/t/...-in-merlin-redmi-note-9-redmi-10x-4g.4258779/
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
[GUIDE][UNLOCK] How to restore the state of UNLOCKED BOOTLOADER in MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
[LK][STOCK] LK Image Partition for MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
[BASEBAND][STOCK][MD1IMG] MODEM Image Partition for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4258919/
[MAGISK][XPOSED] What is working for Magisk and Xposed in MERLIN ?
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
[PRELOADER][STOCK] PRELOADER Partition Binary for MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218929/
[READBACK][FLASH] Read Back file for backuping using flash tool from MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223109/
[SCATTER][FLASH] Scatter file for flashing using flash tool to MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
[STOCK][PATCHED] Boot, Vbmeta and Recovery: Images Partitions for MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
[RECOVERY PROJECT] Collection of TWRP & PBRP & SHRP & ORANGEFOX for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227751/
[VBMETA][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN
https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218909/
[GUIDE] How to skip & avoid EDL auth bypass and FLASH in DOWNLOAD MODE for MERLIN
https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4322631/
TWRP does work above 12.0.5, I have tested.
New build: https://tdrive.elytra8.workers.dev/image-new.img
Flash like you flash any other custom recovery.
For ADS in MIUI, using debloat tool and removing MSA does the job.
Communos said:
TWRP does work above 12.0.5, I have tested.
New build: https://tdrive.elytra8.workers.dev/image-new.img
Flash like you flash any other custom recovery.
For ADS in MIUI, using debloat tool and removing MSA does the job.
Click to expand...
Click to collapse
Thank you very much.
Both were added on FAQ & GUIDE.
Here, you can find unofficial recovery project with closed source: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227751/
Uhm... hello, newbie here and hopefully in the right thread.
I have a Redmi Note 9 and wanted to install LineageOS. What I have done so far:
Jumped through all the hoops to unlock the bootloader.
Since that erases all user data, I did not bother setting a password in the setup. Just went through it as quickly as possible.
Installed TWRP 12.0.6
Used that to install lineage-17.1-20210209-UNOFFICIAL-merlin.zip from here.
Result: The new system does not boot. I always end up in TWRP again. Even if I specifically go to Reboot -> System, it'll boot into recovery. I think the first boot fails and then it goes into recovery (if I power the device off and on again, it vibrates, the logo comes on, the screen goes black, it vibrates again, the logo shows again, and then I'm in TWRP).
What I have tried unsuccessfully:
Flashing the vbmeta from here.
Erasing the misc partition.
Flashing the old lk from here.
Closing the AVB2.0 after flash (with and without closing DM verity).
Wiping cache, dalvik, data, internal storage, and cache before reinstalling LOS.
Replacing TWRP with PBRP and trying again.
Probably some other things I don't remember. I've been chasing red herrings through this rabbit hole all day.
I also tried to install the ArrowOS build (from here), just to have one more datapoint. After that, the device boot-loops into the bootloader, and I have to manually go into recovery via VolUp+Power. This leads me to believe that it's not the LOS build at fault. It seems more likely that I am a moron and am doing something wrong. I just can't figure out what it is.
Any help would be appreciated.
MyBrainIsAStrainer said:
Uhm... hello, newbie here and hopefully in the right thread.
I have a Redmi Note 9 and wanted to install LineageOS. What I have done so far:
Jumped through all the hoops to unlock the bootloader.
Since that erases all user data, I did not bother setting a password in the setup. Just went through it as quickly as possible.
Installed TWRP 12.0.6
Used that to install lineage-17.1-20210209-UNOFFICIAL-merlin.zip from here.
Result: The new system does not boot. I always end up in TWRP again. Even if I specifically go to Reboot -> System, it'll boot into recovery. I think the first boot fails and then it goes into recovery (if I power the device off and on again, it vibrates, the logo comes on, the screen goes black, it vibrates again, the logo shows again, and then I'm in TWRP).
What I have tried unsuccessfully:
Flashing the vbmeta from here.
Erasing the misc partition.
Flashing the old lk from here.
Closing the AVB2.0 after flash (with and without closing DM verity).
Wiping cache, dalvik, data, internal storage, and cache before reinstalling LOS.
Replacing TWRP with PBRP and trying again.
Probably some other things I don't remember. I've been chasing red herrings through this rabbit hole all day.
I also tried to install the ArrowOS build (from here), just to have one more datapoint. After that, the device boot-loops into the bootloader, and I have to manually go into recovery via VolUp+Power. This leads me to believe that it's not the LOS build at fault. It seems more likely that I am a moron and am doing something wrong. I just can't figure out what it is.
Any help would be appreciated.
Click to expand...
Click to collapse
Hey, Custom roms for Redmi Note 9 need MIUI 12.0.1 Indonesia, or MIUI 12.0.3 global vendor.
Downgrade your phone to the specific MIUI vendor, and then try flashing custom rom.
Here's the link for global 12.0.3
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
And before you downgrade your miui version, please erase system and vendor to bypass anti roll back.
Use these commands after connecting device in fastboot mode:
fastboot reboot fastboot
fastboot erase system
fastboot erase vendor
fastboot reboot bootloader
Then flash the 12.0.3 global/12.0.1 Indonesia miui version through MiFlash.
Or
You could give flashing 12.0.1 Indonesia vendor in TWRP, and then flashing rom.
If after fastboot reboot fastboot it shows waiting for device, install this driver. https://drive.google.com/file/d/1JFYCZ3mu_Y_xpnS7QrmtwqOeFnWg6DO2/view?usp=sharing
Please note that you need to be on stock recovery for fastboot reboot fastboot to work.
Happy flashing
Thank you very much! With that info, I think I finally have it working!
I case it's helpful for future users, here are some issues I encountered along the way:
Communos said:
fastboot reboot fastboot
fastboot erase system
fastboot erase vendor
Click to expand...
Click to collapse
Code:
$ fastboot reboot fastboot
fastboot: usage: unknown reboot target fastboot
$ fastboot erase system
erasing 'system'...
FAILED (remote: Partition table doesn't exist)
finished. total time: 0.013s
$ fastboot erase vendor
erasing 'vendor'...
FAILED (remote: Partition table doesn't exist)
finished. total time: 0.012s
Is that normal? I do have a partition named 'super' that I can see in the TWRP backup module. Judging from its size, that could be the system partition. I think there's also a vbmeta_system and vbmeta_vendor, did you mean those?
Then flash the 12.0.3 global/12.0.1 Indonesia miui version through MiFlash.
Or
You could give flashing 12.0.1 Indonesia vendor in TWRP, and then flashing rom.
Click to expand...
Click to collapse
Ok, so I downloaded the full ROM for 12.0.3 global. I'm using Linux, so MiFlash won't work. But the ROM archive I downloaded contained a bunch of partition images and a shell script that would flash them using the fastboot command. I just ran that script. Windows users probably could have run the .bat file that was also included. There were no errors. And after a reboot, MIUI started to boot and presented me with the setup procedure.
I did not complete the setup (I suspect it would have just auto-updated MIUI to something that would have caused problems again) and used the power button to go into the bootloader.
From there, I flashed TWRP again (since it got overwritten by the script mentioned above), went into recovery mode, and tried to install LOS again. First, flashing seemed to hang. The last messages in the log were:
Code:
Installing file '/external_sd/Download/lineage-17.1-20210209-UNOFFICIAL-merlin.zip'
Checking for Digest file...
Target: Redmi/merlin_eea/merlin:10/QP1A.190711.020/V11.0.2.0.QJOEUXM:user/release-leys
And that was it. The border around the progress bar was doing it's busy animation thing and after waiting for 10 minutes, I used the power button to reset the device.
The second attempt went through fine, and now I have LineageOS running on the device. I still need to play around with it some more to see if there are any issues, but the flashing itself seems to have worked.
Again, thank you for your help!
MyBrainIsAStrainer said:
Thank you very much! With that info, I think I finally have it working!
I case it's helpful for future users, here are some issues I encountered along the way:
Code:
$ fastboot reboot fastboot
fastboot: usage: unknown reboot target fastboot
$ fastboot erase system
erasing 'system'...
FAILED (remote: Partition table doesn't exist)
finished. total time: 0.013s
$ fastboot erase vendor
erasing 'vendor'...
FAILED (remote: Partition table doesn't exist)
finished. total time: 0.012s
Is that normal? I do have a partition named 'super' that I can see in the TWRP backup module. Judging from its size, that could be the system partition. I think there's also a vbmeta_system and vbmeta_vendor, did you mean those?
Ok, so I downloaded the full ROM for 12.0.3 global. I'm using Linux, so MiFlash won't work. But the ROM archive I downloaded contained a bunch of partition images and a shell script that would flash them using the fastboot command. I just ran that script. Windows users probably could have run the .bat file that was also included. There were no errors. And after a reboot, MIUI started to boot and presented me with the setup procedure.
I did not complete the setup (I suspect it would have just auto-updated MIUI to something that would have caused problems again) and used the power button to go into the bootloader.
From there, I flashed TWRP again (since it got overwritten by the script mentioned above), went into recovery mode, and tried to install LOS again. First, flashing seemed to hang. The last messages in the log were:
Code:
Installing file '/external_sd/Download/lineage-17.1-20210209-UNOFFICIAL-merlin.zip'
Checking for Digest file...
Target: Redmi/merlin_eea/merlin:10/QP1A.190711.020/V11.0.2.0.QJOEUXM:user/release-leys
And that was it. The border around the progress bar was doing it's busy animation thing and after waiting for 10 minutes, I used the power button to reset the device.
The second attempt went through fine, and now I have LineageOS running on the device. I still need to play around with it some more to see if there are any issues, but the flashing itself seems to have worked.
Again, thank you for your help!
Click to expand...
Click to collapse
Oh you're using Linux, for Linux the commands is
/.fastboot reboot fastboot
Great to know you were able to flash successfuly. Note that first boot in all roms is a bootloop, you just have to force reboot after a minute of bootlogo showing up or so.
hi i flashed a wrong twrp and now the phone keeps bootlooping, cannot enter recovery or fastboot by power + vol (+ or -)
adb from computer doesn't detect
sp flash tool doesn't move when i hit "download" button
bootloader unlocked, root yes
pc notificates a device connection by sound
phone redmi note 9
thank you for the help really cannot figure it out
Kain105 said:
hi i flashed a wrong twrp and now the phone keeps bootlooping, cannot enter recovery or fastboot by power + vol (+ or -)
adb from computer doesn't detect
sp flash tool doesn't move when i hit "download" button
bootloader unlocked, root yes
pc notificates a device connection by sound
phone redmi note 9
thank you for the help really cannot figure it out
Click to expand...
Click to collapse
Apparentely, you need to flash in EDL mode.
So, you need to bypass the authentication in EDL mode first.
Read this: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
Newbie Android user here, hopefully i’m on the correct thread...i have a Redmi Note 9 with MIUI Global version 11.0.5 and Magisk version 20.4.
I tried updating Magisk to the latest version using the direct install option but I keep getting an error. I was told I need manually patch the boot.img and flash it but I need to create a magisk_patch.img first from the boot.img.
I read some of the guides on this thread but I’m not sure which one to follow. Also the steps to create the magisk_patch.image shows I need to click the Install button on Magisk then Select and Patch a file. I only have the Update button on Magisk, can I use that instead?
Or if you have other suggestion how to fix my issue. I attached the error I’m getting when I’m updating Magisk.
Thank you in advance for the assistance.
E77en12 said:
Newbie Android user here, hopefully i’m on the correct thread...i have a Redmi Note 9 with MIUI Global version 11.0.5 and Magisk version 20.4.
I tried updating Magisk to the latest version using the direct install option but I keep getting an error. I was told I need manually patch the boot.img and flash it but I need to create a magisk_patch.img first from the boot.img.
I read some of the guides on this thread but I’m not sure which one to follow. Also the steps to create the magisk_patch.image shows I need to click the Install button on Magisk then Select and Patch a file. I only have the Update button on Magisk, can I use that instead?
Or if you have other suggestion how to fix my issue. I attached the error I’m getting when I’m updating Magisk.
Thank you in advance for the assistance.
Click to expand...
Click to collapse
You can't install the magisk using the direct option.
You need to the patch the boot.img file and then flash the magisk_patched.img using fastboot (or spflashtool).
VD171 said:
You can't install the magisk using the direct option.
You need to the patch the boot.img file and then flash the magisk_patched.img using fastboot (or spflashtool).
Click to expand...
Click to collapse
Thank you, it worked. Now my magisk is updated
E77en12 said:
Thank you, it worked. Now my magisk is updated
Click to expand...
Click to collapse
Good work, my friend.
You are welcome
HELP PLS
i first flashed the patched_magisk.img then i got in a twrp boot loop. When i try to reboot into the system i get back to twrp menu.
Then i panicked and went to WIPE and factory reseted,
but it got stuck again. Then i powered it off.
How do i get out of this? I wanted to flash the stock boot.img but the storage folders has strange names
EDIT:
i figured it out what i have done. The data was ecrypted so i formated the data. But now i have another problem:
I installed linageOS from here, but when want to reboot back to system it says
No OS Installed! Are you sure you wish to reboot? i don't undertand why the custom rom didn't install.
I just copied the .zip file with the custom rom in the phone and hit install in TWRP. What did i do wrong?
George528 said:
HELP PLS
i first flashed the patched_magisk.img then i got in a twrp boot loop. When i try to reboot into the system i get back to twrp menu.
Then i panicked and went to WIPE and factory reseted,
but it got stuck again. Then i powered it off.
How do i get out of this? I wanted to flash the stock boot.img but the storage folders has strange names
View attachment 5289089
EDIT:
i figured it out what i have done. The data was ecrypted so i formated the data. But now i have another problem:
I installed linageOS from here, but when want to reboot back to system it says
No OS Installed! Are you sure you wish to reboot? i don't undertand why the custom rom didn't install.
I just copied the .zip file with the custom rom in the phone and hit install in TWRP. What did i do wrong?
Click to expand...
Click to collapse
Did you flash the patched vbmeta too?
VD171 said:
Did you flash the patched vbmeta too?
Click to expand...
Click to collapse
do you have a full step-by-step guide for this? i am feeling lost rn. I only have your FAQ but it doesnt cover everything
George528 said:
do you have a full step-by-step guide for this? i am feeling lost rn. I only have your FAQ but it doesnt cover everything
Click to expand...
Click to collapse
Steps for flashing vbmeta are same for every device.
You may try to use the search.
Here, you can find patched vbmeta for MERLIN:
[VBMETA][IMG][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
PATCHED VBMETA.IMG for MERLIN by VD171 For what do I need it ? If you try to flash any custom partition, your device can bricks or gets in bootloop. This patch with disabled verity and disabled verification avoid it and need to be flashed once...
forum.xda-developers.com
VD171 said:
Steps for flashing vbmeta are same for every device.
You may try to use the search.
Here, you can find patched vbmeta for MERLIN:
[VBMETA][IMG][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
PATCHED VBMETA.IMG for MERLIN by VD171 For what do I need it ? If you try to flash any custom partition, your device can bricks or gets in bootloop. This patch with disabled verity and disabled verification avoid it and need to be flashed once...
forum.xda-developers.com
Click to expand...
Click to collapse
no, i mean a full guide for rooting from the beggining to end, for redmi note 9. For example i missed the vbmeta and this resulted in an error. Now i have to flash the stock firmware and wait for another 7 days for it to unlock. For newbies like me, this looks like a mess. If you don't have one, can you please create one? Do it for us, newcomers. Thanks