Related
After Root open beta 17 stook on boot logo
Any solution
Amar5373 said:
After Root open beta 17 stook on boot logo
Any solution
Click to expand...
Click to collapse
Well is it really too hard to explain your problem in proper sentences? So you wanted to root your phone. What did you use? Magisk? SuperSU? Which version? I can't help you if you don't provide information..
I have the same problem. Neither SuperSu nor Magisk works.
persa2011 said:
I have the same problem. Neither SuperSu nor Magisk works.
Click to expand...
Click to collapse
supersu not working please help
Use SuperSu 2.82
2.82 works fine for me! Many thanks!
My Steps For Stock OB17 Zip *Same Steps for Magisk V12 Or SuperSu V2.82*
Code:
Flash latest TWRP From Blu_Spark V35 Or Stock TWRP
Format Data Reboot TWRP
Wipe All
Copy [URL="http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_17/"]OB17[/URL], [URL="https://forum.xda-developers.com/devdb/project/dl/?id=25000"]TWRP V35[/URL], [URL="http://www.supersu.com/download"]SuperSU V2.82[/URL] To Internal Storage
Flash OB17
Select Flash IMG, Install TWRP Reboot TWRP (So Stock Rom Doesn't Replace With Stock Recovery)
Wipe Cache/Dalvik
Flash SuperSU
Reboot = Profit
*Optional*
Take A Backup Of Rooted Boot IMG (If You Flash A Custom Kernel And Run Into Issues You Can Restore Rooted Boot IMG With Ease)
Flash Kernel Of Choice (Beware Because Of No Source Code And Kernel Changes Might Be Some Issues With Custom Kernels)
TO root latest beta an stable version you can follow this guide:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
I (without root) flashed the OTA on 11.0.2.0 global PGGMIXM to 11.0.6.0, but, to flash with root... Maybe (I dont know if it will brick) but you can try flash a recovery version of 11.0.6.0
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
hmarder said:
Hello,
i have version 11.0.2.0 Global on the device with twrp, magisk and edXposed.
Now I have seen that there is already a global version 11.0.6.0.
In my case, how can I update to a new version without losing the data and settings?
And one more question in general. Version 11.0.6.0 is not shown to me via OTA. Here it says, latest stable version 11.0.2.0. Is it not rolled out via OTA?
And if there was a newer version available via OTA, could I install the update despite TWRP?
Click to expand...
Click to collapse
One thing you forgot to mention is what region is your phone (not your Rom). If Chinese you may have to be extra cautious and steps above might not work for you.
Good luck!
KonahZave said:
I (without root) flashed the OTA on 11.0.2.0 global PGGMIXM to 11.0.6.0, but, to flash with root... Maybe (I dont know if it will brick) but you can try flash a recovery version of 11.0.6.0
Click to expand...
Click to collapse
Interesting. I'm still on rooted miui 10 4.5.0 PGGEUXM rooted magisk and twrp recovery-红米Note8Pro-3.3.1-9.0.img
I didn't update yet as bricking started to happen and I can't miss my phone as a daily driver.
Normally I would flash the full ROM, flash magisk, wipe cache and reboot.
So flashing full ROM doesn't break root?
Can't we flash recovery by twrp after flashing ROM instead by flashing by fastboot?
Isnt secure flash twrp after the ROM.
donkyshot said:
So flashing full ROM doesn't break root?
Can't we flash recovery by twrp after flashing ROM instead by flashing by fastboot?
Click to expand...
Click to collapse
Flashing a full rom will break root, and install stock recovery...
It is too risky to flash another recovery with twrp (possible brick)
so where to put official update on sd card?
download recovery rom?
unoturbo1 said:
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
Click to expand...
Click to collapse
I just brought rmn8p with miui 11.0.6.0 ,so it is ok to use LRTWRP-3.3.1 -0924. I came across a new version -1104, I'll try it after unlock the bootloader. After that flash preloader then trwp.
Use LR.TWRP, it got an option to make the TWRP persist on every OTA.
Also LR.TWRP = less headache on Xiaomi devices.
Here's the latest build: https://mega.nz/folder/cMAT3Q4b#7CbPV7sbEuSEdP7cehXJ-w
tze_vitamin said:
so where to put official update on sd card?
download recovery rom?
Click to expand...
Click to collapse
??
Put on external sd card dude
unoturbo1 said:
I had exactly the same setup as you - here's what I did: 1 - Downloaded full rom from official Mi website (MIUI Global 11.0.6.0(PGGMIXM) 2 - Moved rom to root storage 3 - Flashed rom with TWRP, and voila! Updated to latest stable rom. Just remember to flash TWRP recovery again through Fastboot, because you will have stock recovery after update. I am using LTWRP- 3.3.1 -0924 and rooted and installed Magisk, without issues
Click to expand...
Click to collapse
For chinese, this will brick the phone. See this instead.
Guys I Just see This video and in it shows the update process, with ltwrp, when the recovery capture the process and update even without losing data, its This True?, somebody has tried?
Link.
This will brick every phone. I brick my EU ROM, with this method of update rooted phone.
What is correct solution to update rooted phone?
Redmi Note 8 Pro, 11.0.2 QGGEUXM, TWRP 3.3.1 1210, Magisk 20.3 -> 12.0.1 QGGEUXM
System say there exists update, i choose download, select reboot, but after reboot i end up in TWRP but nothing happened. After exit i boot to old 11.0.2 system with message that update fail.
Edit 1: after 2. download/update/reboot TWRP start installing image ...
Edit 2: after automatic update system say 12.0.1, just loosing root (all apps stay)
Edit 3: installed TWRP again, Magisk (there was little problem because Magisk Manager say "not installed", but after some googlig i fix that. So i update system without reinstalling apps or loosing data.
Clear solution is probably download full rom from official Mi website and flash selected rom with TWRP (flash TWRP recovery again, repeat root process, to get root back). See next post.
RedMu said:
So what is correct solution to update rooted phone?
Redmi Note 8 Pro, 11.0.2 QGGEUXM, TWRP 1210, Magicks 20.3 -> 12.0.1 QGGEUXM
Now system say there exists update, i choose download, select reboot, but after reboot i end up in TWRP. After exit i boot to old 11.0.2 system with message that update fail.
So solution is probably downloaded full rom from official Mi website and flash selected rom with TWRP (flash TWRP recovery again, repeat root process, to get root back).
So what is correct way for update in this case?
Click to expand...
Click to collapse
This is how I upgraded, try at your own risk.
Download full recovery zip of MIUI 12 and latest magisk
Create twrp Backup just in case
In LR TWRP 10 mount & format system, cache, dalvik, vendor.
Flash full rom (not ota!)
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom if there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and confirm with a swipe to the right.
flash Magisk
boot to system
First boot takes a while, relax and grab a drink
Remember to backup and close AVB!
Thank you so much for sharing these steps. I have questions for a couple of steps below:
donkyshot said:
This is how I upgraded, try at your own risk.
Download full recovery zip of MIUI 12 and latest magisk
Create twrp Backup just in case
In LR TWRP 10 mount & format system, cache, dalvik, vendor.
Click to expand...
Click to collapse
What is TWRP 10? Do I format first and then mount? I usually wipe system, cache, dalvik and then "install" the full rom (your next step), but i never try "mount" here. What does mount do here? what is wiping vender and mounting vender?
donkyshot said:
[*]Flash full rom (not ota!)
[*]Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom if there is a recovery_fromboot.p file delete it.
[*]Go back to Advanced and select Close AVB2.0 and confirm with a swipe to the right.
Click to expand...
Click to collapse
There are two check box here. one is "close the boot verification of avb2.0" the other is "close the DMVerity of avb2.0". Do O check one of both?
Thank you!
po1 said:
Thank you so much for sharing these steps. I have questions for a couple of steps below:
What is TWRP 10? Do I format first and then mount? I usually wipe system, cache, dalvik and then "install" the full rom (your next step), but i never try "mount" here. What does mount do here? what is wiping vender and mounting vender?
There are two check box here. one is "close the boot verification of avb2.0" the other is "close the DMVerity of avb2.0". Do O check one of both?
Thank you!
Click to expand...
Click to collapse
Recovery LR TWRP for Android 10
https://androidfilehost.com/?fid=8889791610682889486
First mount system, cache, dalvik, vendor
Than format system, cache, dalvik, vendor
Without mounting folders they won't be mounted
►go back to your main screen: ADVANCED- close AVB 2.0 then swipe to confirm, just tick only 1st box, ignore the second box
Xiaomi EU Rom based on MIUI 12
ONLY FOR CURTANA DON'T FLASH ON JOYEUSE
Other roms port:
1. Masik X
2. MIUI ROG
Instructions:
1. Download
2. Flash Xiaomi.EU rom zip in TWRP
3. Flash firmware: 11.0.10
4. Format data if your data is encrypted / Wipe data if your data is decrypted | + wipe cache
5. If reboot to fastboot, flash stockboot.zip in recovery and reboot.
Your data partition will be decrypted too after flashing this rom
6. Magisk patches not needed anymore, but do check Magisk patches from third post to see if there is anything necessary.
Warning: Other roms may not flash successfully after flashing this rom. I blame their flashing procedure.
Workaround: Either flash stock or eu rom or old masik rom from fastboot.
Downloads: (Old links will be archived to ensure you are on latest build)
09.08.2020 Recovery Rom
Release Channel
Stock Boot
Mirrors are welcome, tag/quote me if you mirror, thank you
Changelog: Post #2
Bugs:
Turning on haptic feedback will cause systemui crash on scheenshots
CTS fail
Support: Telegram
If you like my work and want to support this project, consider buying me a mouse or something (i don't drink beer) or at least press thanx button. Thank You.
XDA:DevDB Information
eucurtana, ROM for the Redmi Note 9 Pro
Contributors
Sudeep Duhoon
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: MIUI
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2020-08-09
Created 2020-08-09
Last Updated 2020-08-10
Changelog:
09.08.2020
1. Initial Build
Reserved
Boot-loop from 11.0.10, there is nothing to recovered. Now I'm back to stock
Let me try it if I would have any problem I'll send you log
Okay I came from miui 11.0.10 global rom done everything as in the thread and keep bootlooping
ghoster76 said:
Boot-loop from 11.0.10, there is nothing to recovered. Now I'm back to stock
Click to expand...
Click to collapse
Mine works flawlessly!! Here are quick step I do.
Step 1: after flash 11.0.10, I wipe data (that one which need u to type in ”yes");
Step 2: flash this Rom;
Step 3: flash stockbboot.zip n reboot;
Step 4: a vibrate on booting and MIUI logo will appears;
Step 5: all done. Activate ur phone n finish the setup;
Step 6: **optional**, flash magisk if u need root. If not, then proceed with step 5.
All done! Cheers!!!
rikhailwindzar said:
Mine works flawlessly!! Here are quick step I do.
Step 1: after flash 11.0.10, I wipe data (that one which need u to type in ”yes");
Step 2: flash this Rom;
Step 3: flash stockbboot.zip n reboot;
Step 4: a vibrate on booting and MIUI logo will appears;
Step 5: all done. Activate ur phone n finish the setup;
Step 6: **optional**, flash magisk if u need root. If not, then proceed with step 5.
All done! Cheers!!!
Click to expand...
Click to collapse
With these steps works fine for me Thanks
For who came from miui 11.0.10.0, follow these steps, will thank him
Can i update this rom as i shows me update.
Perfect, can't wait to use the new MIUI 12 features !
Thank you and keep it up
update? @Sudeep Duhoon
https://androidfilehost.com/?fid=8889791610682915866
mnauman8 said:
Can i update this rom as i shows me update.
Click to expand...
Click to collapse
Don't update using updater app
henloboii said:
Perfect, can't wait to use the new MIUI 12 features !
Thank you and keep it up
Click to expand...
Click to collapse
Thank you for the support
New build will be posted today
Let me know if you face any issues :fingers-crossed:
fr0bs said:
update? @Sudeep Duhoon
https://androidfilehost.com/?fid=8889791610682915866
Click to expand...
Click to collapse
Test build, may not boot
Wait for the OP to get updated
Sudeep Duhoon said:
Don't update using updater app
Test build, may not boot
Wait for the OP to get updated
Click to expand...
Click to collapse
It work beautifully, everything seems to work perfectly, and this new build looks amazing even better than before. Although a little laggy on start up i'm guessing is cause of the super wallpaper. Thanks a bunch,
Found some bugs. connecting the charger while the phone is sleeping glitches the lockscreen and re sets the wallpaper to the homescreen one. after a few seconds it shows the lockscreen wallpaper. flashing magisk or disabling preloaded apps makes the next restart take longer than normal, had to clear caches on twrp, but still took forever to boot up. Charging animation not present. device not certified on playstore. none of these are deal breakers so i don't mind waiting whatever time until they get fixed. i'm keeping this rom cause i love it.
Reboots in fastboot
Hello, my phone always reboots in fastboot mode even after flashing stockboot, I have tried several times and still stuck under fastboot on startup!
Do you have another solution for me?
HELP !!
i've tried all the methodes to install this ROM and not single one works
Method 1:
1- install MIUI 11.0.10 EU Official Firmware using flashtool
2- install TWRP
3- install This ROM after cleaning data and reboot (stuck on fastboot screen)
4- reboot again to TWRP then flashed Stockboot and reboot (stuck on redmi bootloop)
Method 2:
1- Install MIUI 12 Indian Version
2- install this ROM
3- flash stockboot (stuck on redmi bootloop)
Method 3:
1- Flash MIUI 11.0.10
2- wipe data
3- install this ROM
4- install stockboot
stuck on redmi Bootloop screen again
Method 4:
1- Flash This ROM
2- Flash vendor FW 11.0.10
3- Reboot (Stuck on Fastboot Screen)
I Even tried to flash dtbo.img separately and boot.img separately and i found out that the problem in Boot.img file
my best guess is mismatching of boot.img with the version of the ROM
and now im on stock indian miui 12 again
Please Help me installing this wonderful ROM im Just Tired of STOCK FW ones !!!!
First flash the rom from here : https://www.androidfilehost.com/?fid=10763459528675565205
Flash vendor : https://www.androidfilehost.com/?fid=8889791610682941126
flash Disable_Dm-Verity_ForceEncrypt.zip
FORMAT DATA - not wipe! ( Make sure that you have back uped the necassery file as this will format you internal storage
reboot
Wallas-Palace said:
i've tried all the methodes to install this ROM and not single one works
Method 1:
1- install MIUI 11.0.10 EU Official Firmware using flashtool
2- install TWRP
3- install This ROM after cleaning data and reboot (stuck on fastboot screen)
4- reboot again to TWRP then flashed Stockboot and reboot (stuck on redmi bootloop)
Method 2:
1- Install MIUI 12 Indian Version
2- install this ROM
3- flash stockboot (stuck on redmi bootloop)
Method 3:
1- Flash MIUI 11.0.10
2- wipe data
3- install this ROM
4- install stockboot
stuck on redmi Bootloop screen again
Method 4:
1- Flash This ROM
2- Flash vendor FW 11.0.10
3- Reboot (Stuck on Fastboot Screen)
I Even tried to flash dtbo.img separately and boot.img separately and i found out that the problem in Boot.img file
my best guess is mismatching of boot.img with the version of the ROM
and now im on stock indian miui 12 again
Please Help me installing this wonderful ROM im Just Tired of STOCK FW ones !!!!
Click to expand...
Click to collapse
Cool
boykioy said:
First flash the rom from here : https://www.androidfilehost.com/?fid=10763459528675565205
Flash vendor : https://www.androidfilehost.com/?fid=8889791610682941126
flash Disable_Dm-Verity_ForceEncrypt.zip
FORMAT DATA - not wipe! ( Make sure that you have back uped the necassery file as this will format you internal storage
reboot
Click to expand...
Click to collapse
thank you will try it :good:
Wallas-Palace said:
thank you will try it :good:
Click to expand...
Click to collapse
It worked, thanks
boykioy said:
First flash the rom from here : https://www.androidfilehost.com/?fid=10763459528675565205
Flash vendor : https://www.androidfilehost.com/?fid=8889791610682941126
flash Disable_Dm-Verity_ForceEncrypt.zip
FORMAT DATA - not wipe! ( Make sure that you have back uped the necassery file as this will format you internal storage
reboot
Click to expand...
Click to collapse
Never Mind its working thanks alot
I wonder if twrp 3.7.0 can work with android 13 for galaxy 20 plus
Hello, I've just installed A13 UI 5.0 on my S20u with TWRP 3.7.0 and it work like a charme
Just, when you flash with ODIN untick "restart automatic" , restart directly in TWRP 3.7.0 and flash Magisk 25005
Rman666 said:
Hello, I've just installed A13 UI 5.0 on my S20u with TWRP 3.7.0 and it work like a charme
Just, when you flash with ODIN untick "restart automatic" , restart directly in TWRP 3.7.0 and flash Magisk 25005
Click to expand...
Click to collapse
thanks for your reply which rises a question if i can install A13 zip using twrp akiping odin installation
Ok, you need the BL of A13 to flash with odin, to install a13 with TWRP zip
Rman666 said:
Ok, you need the BL of A13 to flash with odin, to install a13 with TWRP zip
Click to expand...
Click to collapse
i flashed A13 but i don't succeed to install TWRP 3.7.0.
i have twrp-3.7.0-recovery.tar and twrp-3.7.0_11-0-y2s_vbmeta.tar and twrp-3.7.0_11-0-y2s.img.tar
which one should i put in odin AP?
altojd said:
i flashed A13 but i don't succeed to install TWRP 3.7.0.
i have twrp-3.7.0-recovery.tar and twrp-3.7.0_11-0-y2s_vbmeta.tar and twrp-3.7.0_11-0-y2s.img.tar
which one should i put in odin AP?
Click to expand...
Click to collapse
I've managed and have rooted phone with twrp 3.7.0
altojd said:
i flashed A13 but i don't succeed to install TWRP 3.7.0.
i have twrp-3.7.0-recovery.tar and twrp-3.7.0_11-0-y2s_vbmeta.tar and twrp-3.7.0_11-0-y2s.img.tar
which one should i put in odin AP?
Click to expand...
Click to collapse
Use TWRP 3.7.0 vbmeta.tar and put in user-data when U flash whith ODIN. And untick restart automatic. After that, retart with lateral buttons in recovery mode and install Magisk
Rman666 said:
Use TWRP 3.7.0 vbmeta.tar and put in user-data when U flash whith ODIN. And untick restart automatic. After that, retart with lateral buttons in recovery mode and install Magisk
Click to expand...
Click to collapse
I did put twrp-3.7.0_11-0-y2s.img.tar in AP and vbmeta.tar in CP cancelling the automatic restart. After it flashed i did reboot into twrp recovery, formated data and installed multidisabler and magisk. Now i have rooted phone with twrp.
I successfully unlocked my bootloader, then I tried flashing the twrp by following munchy's tutorial from YouTube (as someone recommended here). I also used the twrp recovery file he provided in the description, by using the latest platform tools from the official website. It was going pretty good. I even got the TeamWin logo, and also loaded up the twrp interface, and was able to navigate through it. But the problem was my internal storage wasn't showing up. So I booted back to my system normally to see If I can find a solution. Then I think I tried again after restarting to see if it fixes itself, but the same problem was persisting. The next time when I tried again, I used the latest twrp version which I downloaded from the official twrp website.
But since my 3rd attempt, I am not able to see any TeamWin recovery come up on my phone, when I connect I do the "fastboot boot (twrp filename)" command in cmd. When I do the command, nothing shows up. The device remains in the Fastboot mode, or just turns off. When I switch it back on, It turns on normally and boots into the phone without any issues, and I can use it. I've tried switching back to the original twrp version munchy used in the above linked video, but same result.
What did I do wrong here? How do I make my phone get into the twrp recovery when I enter the fastboot boot (twrp filename) command thru my PC? How do I make my Internal Storage available to view int he TWRP recovery so I can install it from my Downloads folder? I am on MIUI 14.0.4 If that helps. My end goal is to install Magisk.
Any tips/guides/suggestions are appreciated.
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
NOSS8 said:
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
Click to expand...
Click to collapse
Thank you. I had put backed the screen lock after the first 2 attempts because someone said to to that on a YT video after they faced the same problem. Now I tried again by removing the screen lock and the latest twrp for my device also boots up just fine. Now the problem Is I still can't access my internal storage .
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Try to mount storage.
NOSS8 said:
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Click to expand...
Click to collapse
Yes, I removed the screen security, though I can enter TWRP, I can't read the internal storage. MIUI 14.0.4.
I just watched a YT video where the dude does the following:
-TWRP Recovery
- Wipe
- Format Data
- Types 'yes'
then
-TWRP Recovery
- Reboot
- Recovery
- Do not Install
After coming back to recovery after rebooting, he gets a pop up, which at the swipe says "Swipe to allow for modifications" which he swipes, then now after checking the Internal Storage, It's readable now. Is this a possible solution?
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
NOSS8 said:
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
Click to expand...
Click to collapse
what's twrp A13? Also, I just unlocked my bootloader a few hours ago, so my phone has already done a factory reset and i don't have anything to lose except the Magisk APK and .img file in my phone.
But I have a question, will doing the format data just do a factory reset, or will I lose my ROM? Because I'm not trying to install a custom ROM, I just want to Install Magisk as the end goal with my current ROM.
MIUI 14 Android 13 so use this TWRP
plugged the phone into the PC when it is on the TWRP, you will have access to the internal storage. (works on my 12 pro aves twrp A13 Skk).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
zoinksy said:
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
Click to expand...
Click to collapse
Use this TWRP(officiel).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
thank you, this is the one I was looking for. Sorry to bother you again, now I installed the Magisk V26.1 apk from TWRP. And when I boot back to system and try opening the magisk manager, this happens. It says downloading, forever. I think I shouldn't have directly downloaded the latest version. So probably have to downgrade it a bit. For that, what will I have to do?
Can I just hold the Magisk icon, and uninstall it simply like any other app? Or do I have to do it from the TWRP? Also, Is it necessary for me to uninstall it before downgrading, or can I just download the apk of older magisk version and flash it from twrp just like I did previously?
It was on my first post.
Installation
The Magic Mask for Android
topjohnwu.github.io
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
cyanGalaxy said:
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
Click to expand...
Click to collapse
Sure, but currently only in A12.
NOSS8 said:
Sure, but currently only in A12.
Click to expand...
Click to collapse
I use ArrowOS 13
cyanGalaxy said:
I use ArrowOS 13
Click to expand...
Click to collapse
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
NOSS8 said:
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
Click to expand...
Click to collapse
Hm ok.
Welp for me on AOSP, it works nicely. I flash a new build (or two) every week. Backup/Restore works as should. UI is nice and modern, imo better than TWRP. That's why I'm recommending it.
Haven't heard anyone saying that they can't view Phone storage on OrangeFox.
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
néonaloj said:
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
Click to expand...
Click to collapse
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need ,install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
EDIT:
omitted link
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
NOSS8 said:
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
Click to expand...
Click to collapse
I'm very greatfull for your quick reply ! Thanks
The device is too a Poco f3, sorry.. This doesn't need to flash magisk for twrp to stick (I had another one I've broken)
But I don't understand what's the advantage to first flash a fastboot rom..? As you say to flash twrp would loose root and vice versa... (I've read the thread you're talking about ofox)
So I wanted to go trough +- the way I mentionned, as A13 as well as ofox 'seems' to work (but I'm carefull with that twrp on stock MIUI A12, and I never used ofox..)
So you do think it's a bad idea ?? The rom I want to flash is crdroid.
I'm more lost now ...
Thanks again !