Just the title. This is an absolute disaster. It won't turn off, it just boot loops in recovery. I can't turn it off, I can't install a new recovery or anything via ADB because it's not recognized (with or without Kies). The only thing I seem capable of doing is just letting it sit on the charger attempting to boot into TWRP and failing. I'm at my wits' end.
Does anyone have ANY ideas? I'm seriously close to smashing it with a hammer and throwing it in the trash.
SomeGuyDude said:
Just the title. This is an absolute disaster. It won't turn off, it just boot loops in recovery. I can't turn it off, I can't install a new recovery or anything via ADB because it's not recognized (with or without Kies). The only thing I seem capable of doing is just letting it sit on the charger attempting to boot into TWRP and failing. I'm at my wits' end.
Does anyone have ANY ideas? I'm seriously close to smashing it with a hammer and throwing it in the trash.
Click to expand...
Click to collapse
Maybe about same problem you got? http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/help/bricked-tablet-downloading-t3094492
Which model is it? 12.2, 10.1, or 8.4,
Sent from my SM-N910T using XDA Free mobile app
Just recovered my tablet from the same issue. In order to get into download mode, I had to let the battery fully drain. Then, holding the home and vol down keys, I plugged it into the charger. Plugging the charger in while the battery was drained automatically powered it up. After I saw the download warning, I released the buttons and entered download mode as usual. Then I flashed the latest TWRP with Odin.
No other combination of booting or button pressing worked. Trying to enter download with home+vol down and pressing power did not work for me either.
Good luck and PM me if you have any questions about this. I hope I explained it correctly.
Galaxy Tab S 8.4, SM-T700. Received the lollipop update and that worked fine. Immediately tried to run CF-Auto-Root on it using Odin 3.07 and CF-Auto-Root-klimtwifi-klimtwifixx-smt700.tar.md5. I booted into download mode, started Odin and clicked Start. Only the first progress block in Odin lit up and the Tab S only showed about an inch of blue progress line. That was it for about 4 hours.
The tab was not responsive, shutting down Odin did nothing and trying a different Odin version also did nothing. So I had no choice but to disconnect the Tab S. Immediately rebooted to the "Firmware upgrade encountered an issue...." message. Running Kies does not recognize the tablet, running different versions of Odin with the stock firmware does nothing and the Tab won't do anything but restart into the "Firmware encountered an issue" screen. Won't go into download mode at all and nothing I do in Kies or Odin seems to work.
Last several times I've used CF-Auto-Root went flawlessly. This time, not. So if it continually reboots in to the "Firmware encountered an issue" screen, is there any recourse?
I have let it run out of juice and left it plugged in long enough to recharge fully but no matter what I do, it won't do anything but get to that one annoying screen!
Maybe there's a sequence of steps I'm missing. Anyway, been trying everything I can find out there on this but it's not working.
Thoughts?
You likely have a bad cable there. That's what happens.
You should be able to get download mode if it boots to the firmware failed screen
If you can boot to recovery then just wipe cache and it should boot.
From the firmware failed screen hold POWER + VOL DOWN + HOME until it restarts then immediately change to VOL UP whilst still holding the other buttons.
If that doesn't work try again with POWER + VOL DOWN + HOME until download mode boots.
If you still can't get either you can try the usb jig, which apparantly does work on this device.
Ask skOrPn which one to use, he use to build these things.
Hmmmm, you're right. I was using the Samsung cable that came with the tablet so figured there wasn't anything wrong with it (since one of the popular solutions is to not use a generic and make sure to use the Samsung).
So I dug deep in the vault for a slightly older Samsung cable from a previous phone and tried it. Sure enough - it worked. Odin completed the CF-Auto-Root in the 10 seconds it usually takes.
Clearly even Samsung cables go bad.
Thanks for pointing out the obvious but not so obvious!
Bob
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Hm, I had this 2 month ago with a S4...
Same thing, I go to my provider he checked the Handy and said I have a defect on my Mainboard... He use dos tools for Handy analysis... I flash stock with Odin, too... Success but no boot...
CarHDRom V.27.3 by Carotix S6edge
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Docmjldds said:
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Click to expand...
Click to collapse
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
nyknight77 said:
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
Click to expand...
Click to collapse
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
Really appreciate your help here. Would flashing TWRP with odin trip knox? I'm afraid to flash anything not stock rom related.
Docmjldds said:
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
Click to expand...
Click to collapse
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
PS: Have you tried turning phone off. Then power on and then immediately hold the vol up home pwr buttons combo. That should also get you into recovery mode. But that said, I would still try my last.
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
He wants to keep stock. NOT a good idea
Docmjldds said:
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
Click to expand...
Click to collapse
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
nyknight77 said:
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
Click to expand...
Click to collapse
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
maxter55 said:
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
Click to expand...
Click to collapse
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
nyknight77 said:
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
Click to expand...
Click to collapse
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Docmjldds said:
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Click to expand...
Click to collapse
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think i would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
nyknight77 said:
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think I would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
Click to expand...
Click to collapse
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Docmjldds said:
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Click to expand...
Click to collapse
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
The only thing I can think of is that your setup is so corrupted you basically have no choice here. It's kind of the old adage about knowing it's important to occasionally back up the internal data, but just never get to it. I'm kind of paranoid to every now and then make sure I have copies of stuff around. I know it's zero solace for you, but without getting into recovery mode, there is no way to get to the Internal stuff that I know of. I'm assuming you never used smartswitch to backup or just use a computer to copy paste Internal stuff to a folder for saving.
HMMMM...Password:
ZiDroid.com
Try this stock Recovery. I found a post I made almost two years ago with a link to this file. Use the password to open the file and try ODIN again
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Docmjldds said:
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Click to expand...
Click to collapse
Really appreciate your help. I'm starting to think more that it's a bad battery now. Hope that's just it instead of the main board.
I left phone on charge for a few hours (constantly boot looping the whole time). I'm able to power off the phone by holding Power button and Volume down for 10 seconds. Screen is completely off, no boot looping.
Step1: When try to simply turn phone on by holding power button for three seconds, the first samsung galaxy s6 edge logo screen pops up but then goes away and phone looks to be off. Like it's trying to get power from the battery but can't.
Step2: If I keep holding the power button, that first logo screen would turn on and off as if it's a boot loop. If I let go, then phone is off again.
Step3: If I go into download mode and select Cancel (restart phone), it goes into boot loop with only first logo screen again. It loops until I hard reset by holding power button and volume down again for 10 seconds. Then phone is off. Same thing repeats if I go back to Step1 again.