Related
Hi everyone,
I just recently got a SM-R805N (Korea LTE ver) and want to change its region.
However the CSC variants in the stock only contains Korea telecom (as mentioned in the CSC thread by ecoco1)
I am trying to use the old fashion way: flash in the combination firmware, switch the CSC and then flash back to stock, in which, the CSC I am looking for is in SM-R805F version
However, I cannot find any free source for SM-R805F firmware online... all those available , also in this XDA forum, is only for bluetooth version.
Would anyone in XDA able to source the R805F firmware? (best to have both combination & stock?)
Thanks a million
worldcupxda said:
Hi everyone,
I just recently got a SM-R805N (Korea LTE ver) and want to change its region.
However the CSC variants in the stock only contains Korea telecom (as mentioned in the CSC thread by ecoco1)
I am trying to use the old fashion way: flash in the combination firmware, switch the CSC and then flash back to stock, in which, the CSC I am looking for is in SM-R805F version
However, I cannot find any free source for SM-R805F firmware online... all those available , also in this XDA forum, is only for bluetooth version.
Would anyone in XDA able to source the R805F firmware? (best to have both combination & stock?)
Thanks a million
Click to expand...
Click to collapse
I will grab it shortly for you
deadman96385 said:
I will grab it shortly for you
Click to expand...
Click to collapse
Million thanks!
worldcupxda said:
Million thanks!
Click to expand...
Click to collapse
Here is the R805FXXU1CSA3 firmware
https://www.androidfilehost.com/?fid=1395089523397890804
Here is the FT40_R805FXXU1ARJ1 Combination firmware
https://www.androidfilehost.com/?fid=1395089523397890811
They are the latest ones i could pull, hope it helps
Caution.
Since Gear S3 it is NO good idea to flash wrong Firmware nor wrong parts... to LTE variants...
You could end like this:
https://forum.xda-developers.com/smartwatch/gear-s3/sm-r765f-teardown-t3659431
https://forum.xda-developers.com/smartwatch/gear-s3/please-help-bricked-gear-s3-sm-r765s-t3665558
I have no Galaxy Watch... but this means not I have no idea how dangerous it is... if you doing """experiments"""...
Example:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Only as info.
Additional info...
Not tested what happens with CSC only... BUT be sure it is not less dangerous... because partition PIT is inside CSC and netOdin AUTOMATIC write this file to device...
Suggestion...
Study offline...
You can extract files with 7zip and compare...
rootfs.img needs some other Tools or Linux... or...
Best Regards
adfree said:
Caution.
Since Gear S3 it is NO good idea to flash wrong Firmware nor wrong parts... to LTE variants...
You could end like this:
https://forum.xda-developers.com/smartwatch/gear-s3/sm-r765f-teardown-t3659431
https://forum.xda-developers.com/smartwatch/gear-s3/please-help-bricked-gear-s3-sm-r765s-t3665558
I have no Galaxy Watch... but this means not I have no idea how dangerous it is... if you doing """experiments"""...
Example:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Only as info.
Additional info...
Not tested what happens with CSC only... BUT be sure it is not less dangerous... because partition PIT is inside CSC and netOdin AUTOMATIC write this file to device...
Suggestion...
Study offline...
You can extract files with 7zip and compare...
rootfs.img needs some other Tools or Linux... or...
Best Regards
Click to expand...
Click to collapse
Thanks adfree, but its too late... I have already bricked my brand new galaxy watch...
Now the watch wont go into any mode below. All it does is have a flash of horizontally line screen, consistently.
continue
factory command
recovery
download (wireless)
Tried the method "press 2 seconds, release 1 second" does not work, think it corrupted the partition.
Only mode still work is "download" which shows the screen correctly. What make it worse is I reset the watch before doing this and forget to turn off activation lock (but I have my own user name and password, think that does not make it worse then?)
Appreciate if any idea on how to tackle this... am already thinking about buying the usb connector for odin flash...(hopefully something will make it work again...)
Suggestion, if you want try it self at home....
Look into this post:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Look into Video...
You can also click around this Thread... to see diffferent "solutions"...
Security prevent netOdin use... IMHO no way without USB to flash again.
If you have POGO Connector... Odin...
Then try FIRST to flash SM-R805N...
I see at this time it is not leaked...
So you need luck to flash SM-R805N Firmware...
Hopefully Warranty Void will still:
0 0x0000
Seems 3 SM-R805N Stock Firmware leaked:
Code:
R805NKOU1ARK8
R805NKOU1ARJ6
R805NKOU1ARHJ
You can PM me... if you need Help with POGO...
Best Regards
Sent you a pm thanks very much, i have not yet able to watch the video as im at work, but i think i need the items below:
R805N stock firmware
POGO Cable for usb connection
anything else would i need?
worldcupxda said:
Sent you a pm thanks very much, i have not yet able to watch the video as im at work, but i think i need the items below:
R805N stock firmware
POGO Cable for usb connection
anything else would i need?
Click to expand...
Click to collapse
Sorry to hear it bricked, here is at least R805N normal firmware, there isn't any combo firmware that I can find atm
https://www.androidfilehost.com/?fid=1395089523397891319
Thank you @deadman96385 for the firmware
Hi adfree, here is the photo of the "Download" screen
Now i need to get my hand on the cable to try it out...
Thanx for Photo. :good:
Good:
A
SM-R805N to see...
So sboot.bin is not overwritten...
B
Warranty void still 0 0x0000
So Knox not dripped... BUT you have to wait for final result after Repair Flash...
Not so good = IMHO bad...
Reactivation Lock is ON...
This means MORE f&%ing Security...
As "we" have only Stock Firmware...
If no luck then also Warranty Void Value will change... maybe.
P.S...
partition.pit aka PIT is 1:1 same between SM-R805F and SM-R805N... except the RSA 2048 Signature crap at the end of file.
Best Regards
adfree said:
Thanx for Photo. :good:
Good:
A
SM-R805N to see...
So sboot.bin is not overwritten...
B
Warranty void still 0 0x0000
So Knox not dripped... BUT you have to wait for final result after Repair Flash...
Not so good = IMHO bad...
Reactivation Lock is ON...
This means MORE f&%ing Security...
As "we" have only Stock Firmware...
If no luck then also Warranty Void Value will change... maybe.
P.S...
partition.pit aka PIT is 1:1 same between SM-R805F and SM-R805N... except the RSA 2048 Signature crap at the end of file.
Best Regards
Click to expand...
Click to collapse
thanks... I should be able to get the POGO wire mid next week, will update you the result....!
My Galaxy is back alive! Thanks everyone in this thread. Tested the following:
Install R805N firmware: Download mode: Works
Install R805F firmware:
Download mode: PIT fail instantly, without install
Download (Wireless): Able to complete the install -> Fail warning in red -> Bricked
Tried for combination firmware, or CSC only, same result
Guess I will never have chance to change my CSC then...? (Unless there is a combination R805N available which has all CSC countries inside?)
hi did you manage to change the region? I have the same watch.
Hello everybody,
i need R800XXU1BSA4
SM-R800 galaxy watch 46mm bluetooth version firmware
can anyone help me ?
thank you
Malor1k said:
hi did you manage to change the region? I have the same watch.
Click to expand...
Click to collapse
no i am not able to change, as mentioned above, the original firmware does not have other CSC included, flashing any other firmware will brick the watch
i think it will only be possible if R805N has a combination firmware release
Looking for firmare
Hello,
I have a Galaxy watch,the LTE version - I got it as a present from a friend abroad and in order to connect to domestic mobile provider I need to use
the latest firmware. That is R805FXXU1FSL3
I 've searched as much as possible online to track it but without success.
Can someone please help?
Thank you very much
Hey ! same issue here. Did we find a solution?
@worldcupxda whats the update?
Hi I have Galaxy watch 46mm LTE INDIA version, after by changing CSC to Australia by *#272*IMEI# to get Samsung Pay. After that I'm not able to make calls through Stand Alone mode.
I have tried to the change the CSC through COMBINATION, But Push data is getting denied.
Kindly provide me a link for INDIA stock Firmware and help me out.
Million Thanks.
Suprith Jadhav said:
Hi I have Galaxy watch 46mm LTE INDIA version, after by changing CSC to Australia by *#272*IMEI# to get Samsung Pay. After that I'm not able to make calls through Stand Alone mode.
I have tried to the change the CSC through COMBINATION, But Push data is getting denied.
Kindly provide me a link for INDIA stock Firmware and help me out.
Million Thanks.
Click to expand...
Click to collapse
Did you find any solution
Hi all,
I'm a bit annoyed with Samsung where July Update is already out but I'm still on May Update.
I would like to change my csc to India so that I get updates faster.
Can someone explain or provide a guide on how changing the csc to india please?
Thanks in advance
Simple
Ultiweap said:
Hi all,
I'm a bit annoyed with Samsung where July Update is already out but I'm still on May Update.
I would like to change my csc to India so that I get updates faster.
Can someone explain or provide a guide on how changing the csc to india please?
Thanks in advance
Click to expand...
Click to collapse
Hey mate! Just flash newest firmware of India via ODIN
Or use Samsung Smart Switch for computer to get faster updates :good:
Bl4Ck R34Ct0r said:
Hey mate! Just flash newest firmware of India via ODIN
Or use Samsung Smart Switch for computer to get faster updates :good:
Click to expand...
Click to collapse
Is it safe to flash A505F firmware on the A505FN device? As far as I know, the only difference is NFC.
And is it possible to void the warranty by doing this?
I tried Smart Switch a few times, but no updates.
Bl4Ck R34Ct0r said:
Hey mate! Just flash newest firmware of India via ODIN
Or use Samsung Smart Switch for computer to get faster updates :good:
Click to expand...
Click to collapse
Hi thanks for your reply.
Should I need to remove all accounts, and make a factory reset first?
Smart Switch only will provide you the newest firmware in the same line, not an option to use other different firmware from a different region.
Ever is recommended to do a factory reset/format data before to "switch" to other firmware and make a backup before to restore it in just minutes with SS.
Install Phone Info(Samsung) and there you will find the CSC availables for your device before to change the firmware (most of the international models are multi_CSC compatible), search for the regions and compare them here https://www.****************/2017/0...specific-product-code-csc-and-country-region/ if some of them is convenient for you then you can flash it, check before your bootloader version, I think all are now in v1 but check it before to go further.
SubwayChamp said:
Smart Switch only will provide you the newest firmware in the same line, not an option to use other different firmware from a different region.
Ever is recommended to do a factory reset/format data before to "switch" to other firmware and make a backup before to restore it in just minutes with SS.
Install Phone Info(Samsung) and there you will find the CSC availables for your device before to change the firmware (most of the international models are multi_CSC compatible), search for the regions and compare them here https://www.****************/2017/0...specific-product-code-csc-and-country-region/ if some of them is convenient for you then you can flash it, check before your bootloader version, I think all are now in v1 but check it before to go further.
Click to expand...
Click to collapse
Hi thanks for you reply. I checked with phone info but I don't have CSC INS available but can I flash INS firmware and will it work?
Ultiweap said:
Hi thanks for you reply. I checked with phone info but I don't have CSC INS available but can I flash INS firmware and will it work?
Click to expand...
Click to collapse
Yes, you usually can (I switched a lot of times) but you could find some issues regarding to radio/baseband depending on how different they´re.
Take a backup before using Smart Switch, take note of your actual firmware in a safe place if something goes wrong and don´t forget to enable USB debugging and OEM unlock before to go.
SubwayChamp said:
Yes, you usually can (I switched a lot of times) but you could find some issues regarding to radio/baseband depending on how different they´re.
Take a backup before using Smart Switch, take note of your actual firmware in a safe place if something goes wrong and don´t forget to enable USB debugging and OEM unlock before to go.
Click to expand...
Click to collapse
Hi,
Good yes already did a backup and OEM Unlock and USB Debugging are one.
I'm simply waiting the firmware to be downloaded. Take very long time to download from samfrew
Finally succeeded in flashing to INS.
I forgotten to remove my Sim Card but even that it has changed the CSC.
Thanks a lot for your help @SubwayChamp
Ultiweap said:
Finally succeeded in flashing to INS.
I forgotten to remove my Sim Card but even that it has changed the CSC.
Thanks a lot for your help @SubwayChamp
Click to expand...
Click to collapse
Hey, what's the model of your device? Is it FN, or F? Because Indian firmware is A505F, so I don't know if I can flash A505F firmware on my FN device.
Ibroxx said:
Hey, what's the model of your device? Is it FN, or F? Because Indian firmware is A505F, so I don't know if I can flash A505F firmware on my FN device.
Click to expand...
Click to collapse
My model is A505F. I don't think you may install F on FN. It may work but you may have several problem with correct functionality of the phone or even brick it.
Ibroxx said:
Hey, what's the model of your device? Is it FN, or F? Because Indian firmware is A505F, so I don't know if I can flash A505F firmware on my FN device.
Click to expand...
Click to collapse
F firmware on an FN device should be ok afaik, but I believe you'll loose NFC
Also keep in mind that INS csc has this string in cscfeature_network.xml
<CscFeature_Message_ConfigImeiTracker>+919560345888,+918424098931,+919176905802</CscFeature_Message_ConfigImeiTracker>
I remember that this was a problem on custom roms for the old A-series since all roms for some reason added INS csc, so a bunch of users in europe got charged extra for messages to india if they didn't remove that from cscfeatures..
Not sure if it still acts the same, but I can confirm that the string is there in INS csc for A50.
Ultiweap said:
Finally succeeded in flashing to INS.
I forgotten to remove my Sim Card but even that it has changed the CSC.
Thanks a lot for your help @SubwayChamp
Click to expand...
Click to collapse
Can you make a new thread and post the process?
tys0n said:
F firmware on an FN device should be ok afaik, but I believe you'll loose NFC
Also keep in mind that INS csc has this string in cscfeature_network.xml
<CscFeature_Message_ConfigImeiTracker>+919560345888,+918424098931,+919176905802</CscFeature_Message_ConfigImeiTracker>
I remember that this was a problem on custom roms for the old A-series since all roms for some reason added INS csc, so a bunch of users in europe got charged extra for messages to india if they didn't remove that from cscfeatures..
Not sure if it still acts the same, but I can confirm that the string is there in INS csc for A50.
Click to expand...
Click to collapse
Thank you.
There is finally firmware with July patch for FN versions of this device, so probably I'll wait few days, because only 5 countries in Europe got an update to the newest version, skipping June security patch, but I hope we'll have new features in the camera.
Does anyone know how to correctly change CSC on the Canadian N975W? I purchased a used Note 10+ that the previous user bought from Samsung direct but had a Bell sim so the CSC shows BMC and has bell bloatware. I'm trying to change it to KDO but no luck with any firmwares yet. Any ideas or steps I'm missing?
Tried both KDO and XAC firmware but the file names seem that they're the exact same from both updato and SamFirm.
Using patched odin and everything loads fine - using CSC not the Home CSC.
?
Sent from my SM-N976V using Tapatalk
Trying to switch CSC and it won't change through normal method.
pearse said:
Trying to switch CSC and it won't change through normal method.
Click to expand...
Click to collapse
it should change depending on sim inserted as long as it contains the csc on the device.
you can use phone info or similar to see available csc.
you can also try *#272*IMEI#
Domt think itll help but i believe you could also install U and U1 firmwares to ur W variant. Maybe trying the U1 will help
hello all
plz i have an important question
Could I install firmware SM-N975U1 to my note unlocked from Canada model SM-N975W ??? same hardware
georgeelbob said:
hello all
plz i have an important question
Could I install firmware SM-N975U1 to my note unlocked from Canada model SM-N975W ??? same hardware
Click to expand...
Click to collapse
Maybe if u ask in a few more threads someone will finally answer u..
Or u can just try it
Only in the same muti-csc rom can change
Go to http://www.samkey.org/ to buy SamKey CodeReader – 15 points is $ 45 USD, and there are split sales on some trading platforms for about 3 points $ 6.6 This is what you want to do
Download the SamKey program on its website, and download the driver together if necessary
p40403 said:
Only in the same muti-csc rom can change
Go to http://www.samkey.org/ to buy SamKey CodeReader – 15 points is $ 45 USD, and there are split sales on some trading platforms for about 3 points $ 6.6 This is what you want to do
Download the SamKey program on its website, and download the driver together if necessary
Click to expand...
Click to collapse
Or just pay for chimera..at least it can change csc on g975u now
Honor 9X: "Error: /preas/ xxx not found in/hw_product/hw_oem/STK-L21HN/parent_cust.c
Hello guys!
A few days ago , tried to upgrade the software of my device, manually via microsd card, using the dload method.
I got a softbrick.
I tried many roms for Honor 9X STK-LX1 (C431) but none worked.
After many attempts, i installed the latest official firmware Emui 10 with Android 10 ( STK-L21HN -10.0.0212), and the device is functional now, but with many bugs.
1) The logo screen has change from previus "HONOR 9X" to "HUAWEI".
2) The new rom is installed without a keybord. So It's difficult for me to setup the new rom.
3) In ----> Settings---->telephone information---->the model seems as "unknown " and
4) In----> Settings----->telephone information---->publication number----> "Error: /preas/ xxx not found in/hw_product/hw_oem/STK-L21HN/parent_cust.cfg"
Do you know what these errors mean and how to fix???
Thank you!
Solved
https://forum.xda-developers.com/an...fficult-to-t4177819/post83729825#post83729825
With the help of @oslo83, we managed to make the device functional.
Now it works like a charm.
It was not easy at all and oslo83 tried
very much.
I want to thank him for his interest and help.
Hi.
I have exactly the same problem...
I would upgrade my Honor 9x (STK-L21HN 9.1.0.334) to emui 10 (10.0.0.212).
@oslo83: Can you explain to me what I have to do for that or may you help me to do?
Thanks in advance.
bennyvon88 said:
Hi.
I have exactly the same problem...
I would upgrade my Honor 9x (STK-L21HN 9.1.0.334) to emui 10 (10.0.0.212).
@oslo83: Can you explain to me what I have to do for that or may you help me to do?
Thanks in advance.
Click to expand...
Click to collapse
Sure, PM me on telegram.me/oslo83
It's about upgrading to a correct LGRPx base for your device, while upgrading correct emui10 cust and preload.
help me with my honor 20 china
Hello can you help me to my Honor 20? its also display in my build number "Error: /preas/xxx not found in /product/hw_oem/L61/parent_cust.cfg" i willing to pay to solve this
I have the same errors with an Huawei P20 Lite (ANE-LX2) region spceas changed to eu via DC-Unlocker
Now is on this firmware:
HUAWEI ANE-LX2 9.1.0.209(C636) YAZILIM ilsasupport.com
- Installed without a keyboard. Solved downloading microsoft swiftkey from appgallery.
- Model is ANE, not ANE-LX2
- Build is: "Error: /preas/ xxx not found in/product/hw_oem/LX1/parent_cust.cfg"
This is not a big problem for me now, because all works ok, is rooted, I can use, call and play well with it. But I'm curious about what is the problem and how to solve it.
Install an other firmware, one which is right for your device's variant hardware.
Job ID: 0000000001978059
2022-04-07 07:46:25
Job ID: 0000000001978059
2022-04-07 07:46:25
oslo83 said:
Sure, PM me on telegram.me/oslo83
It's about upgrading to a correct LGRPx base for your device, while upgrading correct emui10 cust and preload.
Click to expand...
Click to collapse
bruh i have honor 9x pro global version and i downgraded my software to emui 9.1.1.131 but i'm getting chinese keyboard and everthing is crashing there is no browser and all could you pls help me to download the correct firmware for my device i did by dload method but now if i try to update emui it shows incompatible for this version and sometimes software install failed can u pls help if u help me i would be very grateful so pls..
So, after investigations on device, a chinese base was flashed by offline dload on this branded overseas device.
Here why the problems. Force flashing a correct base for actual branded model and region would fix.
oslo83 said:
So, after investigations on device, a chinese base was flashed by offline dload on this branded overseas device.
Here why the problems. Force flashing a correct base for actual branded model and region would fix.
Click to expand...
Click to collapse
Can u tell how to fix it please
oslo83 said:
So, after investigations on device, a chinese base was flashed by offline dload on this branded overseas device.
Here why the problems. Force flashing a correct base for actual branded model and region would fix.
Click to expand...
Click to collapse
Hey i tried that but when i click on update it show it's already on latest version...after v2 and hiproxy ?
I have bought SM-N976N but I think the company had flashed SM-N975F firmware in it before and it was running android 11os I think it's refurbished course I don't receive update nor security updates, so I tried updating it firmware manually using odin from android 11 to android 12 model number SM-N975 firmware , but doesn't work it refused to flash with error saying (repetition fail )
I have now flashed it with KOO version of SM-N976N android 12 but my problem is that the phone is not recognizing sims or carrier in it (not even 3G or 4G) I'm from Nigeria.
So my question is , how can I flash back N975f cz my region will be covered in it. Because samsung has not launched a PAK version of firmware of SM-N976N.
Please help how will I be able to get my sims working in Nigeria with or without root? Please help anyone.
This link helped me
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution - IAASTEAM
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution New Improved Auto Patch FEB 2022
iaasteam.com
mohgaza said:
This link helped me
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution - IAASTEAM
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution New Improved Auto Patch FEB 2022
iaasteam.com
Click to expand...
Click to collapse
Okay bro I will give it a try right away , pls am I to flash this using Odin tool?
Please help me I tried flashing thi
mohgaza said:
This link helped me
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution - IAASTEAM
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution New Improved Auto Patch FEB 2022
iaasteam.com
Click to expand...
Click to collapse
Please help me , I tried flashing this rom and I got the error saying ( only official released binaries are allowed to be flashed(boot)
Please help me I tried flashing thi
mohgaza said:
This link helped me
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution - IAASTEAM
N976N U2 ANDROID 12 Convert To Dual N976B U7 IMEI Fix Final AutoPatch Firmware Tested Solution New Improved Auto Patch FEB 2022
iaasteam.com
Click to expand...
Click to collapse
Please help me , I tried flashing this rom and I got the error saying ( only official released binaries are allowed to be flashed(boot
Josh5ver said:
Please help me I tried flashing
Please help me , I tried flashing this rom and I got the error saying ( only official released binaries are allowed to be flashed(boot)
Click to expand...
Click to collapse
Thanks alot brother, it's working fine now everything works just perfectly as expected am very grateful
happy to hear that. Good Luck
Please sir
Have you noticed a change in the IMEI number after flashing this U2 N976N Autopatch firmware the network has been failing since then and hard to discover network around, the downloading speed is more like 2G and not even 3G nor 4G is really slow , how where u able to fix this issue?
i am unable to download the file in the link. it starts well but fails at 3.4gb every time i try. any help please
First of all, make sure ur devices is exactly N976N model
Then, flash the last bootloader to BL slot via odin. This may sovled the problems about network.